Post on 25-Sep-2020
“HINGE YOUR WELD-ON HARDWARE NEEDS ON US!”
www.intercononline.com
CAT 303 / No guarantee for weights and dimensions. The right to alterations is reserved.Valid from 04/11
3www.intercononline.com Toll Free: 1-800 665-6655
TABLE OF CONTENTSINTERCON ENTERPRISES Company Profile 4WELD-ON-HINGES – Teardrop Profile – Introduction 5WELD-ON-HINGES (Teardrop Profile)
6FES Series (Mild Steel – 2 pc w/steel pin)FMS Series (Mild Steel – 2 pc w/brass pin)FES/GF and FMS/GF (Same as above w/Grease Fitting) ALU Series (Aluminum – 2 pc w/stainless pin) + GF modelsV2A Series (Stainless – 2 pc w/stainless pin) + GF modelsA3E Series (Mild Steel – 3 pc – HEAVY DUTY w/removable pin)
7
AES Series (Mild Steel – 2 pc w/removable pin)*Important Application Notes & Weld-on Diagrams (Line Drawings) 8
BUTT HINGES – HEAVY DUTY (Weld-on / Non-Swaged)9
H18 Series (Mild Steel)FLAG HINGES – HEAVY DUTY (Weld-on w/removable pin & end plug)
10KOS Series (Mild Steel – 2 pc) & K3S Series (Mild Steel – 3 pc)
CONTAINER HINGE – EXTRA HEAVY DUTY (Weld-on w/removable pin + Grease Fitting)11
H92 Model (Forged Steel – 3 pc)GATE HINGES – HEAVY DUTY (Weld-on)
12H77 Series (Mild Steel – Adjustable)
HANDLES – (Weld-on/Bolt-on)
13G03 Model Heavy Duty Weld-on(Forged Steel)G04 Model Weld-On (Mild Steel)G05 Model Weld-On (Aluminum)G06 Model Weld-On (Stainless)G10 Model Bolt-on/Screw-on (Galvanized Steel)
DRAW LATCHES – NON-ADJUSTABLE STYLE
14L11 Series (Galvanized Steel & Stainless)L21 Series (Galvanized Steel & Stainless)L22 Series – Lockable (Galvanized Steel & Stainless)Includes: C & D Latch HooksADJUSTABLE STYLE
15L32 Series (Galvanized Steel & Stainless)L26 Series - Lockable (Galvanized Steel)Includes: C & D Latch Hooks
CONTAINER RING – (Weld-on/Bolt-on/Screw-on) – Used for Rope/Rigging, etc.
16C03 Model (Galvanized Steel – recessed for Flush Mount)
“D” RINGS – HEAVY DUTY (Weld-on & Bolt-on Models)DRW Series (Steel Weld-on) & DRB Series (Steel Bolt-on)
HOOKS – (Weld-on)17C02 Model EXTRA HEAVY DUTY (Cast Steel)
ASH Series HEAVY DUTY (Forged Steel w/Safety Clip)Display Basket for Weld-on-Hinges (Counter-top unit for Distributor Sales) 18TERMS & CONDITIONS OF SALE 19
4 www.intercononline.comToll Free: 1-800 665-6655
Intercon Enterprises Inc. (Est. 1978), consistently delivers high quality products to the manufacturing/fabricating/welding industry. Founded by Mr. Alfred Schenk,
Intercon has grown and prospered over the last 3.1/2 decades by delivering on its’ motto of providing “leading performance through innovation and quality”. The attributes of this motto direct the unique products, their manufacturing process and the sales/marketing philosophy that is Intercon Enterprises Inc.
Intercon is well known as a manufacturer and supplier of the unique, teardrop profile, Weld-on-Hinges & Industrial Hardware (BAER Hardware). The success with this line of hinges comes through the fact that they have a professional appearance, eliminate fasteners and unsightly leaves, are engineered with a high weight load capacity to size ratio and are ideal for gates, toolboxes, doors, access panels, trailers and more. Intercon’s built on this success with a complete Hardware Program for the OEM & Fabrication industry – ie., weld-on-hinges, draw latches, hooks and handles.
Intercon’s other products can benefit you, your company and your daily manufacturing operations – view these on our website: www.intercononline.com
INTERPURGE – Pipe Weld Purging Systems & Accessories(World leading technology for the stainless & titanium pipe welding industries.)
HARDY “Non-Sparking” TOOLS – Aluminum Bronze, Beryllium Copper & Titanium (Hand tools used where a “spark” may contribute to an explosion or risk of fire.)
JOKISCH – Machining/Grinding Coolants, Tapping Oils & Welding Anti-Spatters (High Quality Industrial Fluids Manufactured in Germany since 1961.)
TIGRIP & INTERLIFT – Plate Clamps, Crane Forks, Lifting Magnets & Assorted Material Handling Grabs for “everything under the hook” lifting applications.
For other information, more technical related enquiries, (or a complete Master Catalog), contact us at 1-800-665-6655 or e-mail: sales@intercononline.com
Since 1978COMPANY PROFILE
5www.intercononline.com Toll Free: 1-800 665-6655
FES6 Inch
FES8 Inch
FES4 Inch
FES3 3/16 Inch
FES2 Inch
FEATURES• High Load Capacity • Professional Appearance • Ideal For Gates, Toolboxes, Doors, Trailers, BBQs, Etc.• Permits Smooth Operation • Eliminates Fasteners & Unsightly Leaves • Can Be Welded On As Lift-off or Permanently Mounted • Paintable To Match Door or Frame • Can Be Galvanized • Available With Grease Fittings
WELD-ON HINGES (Tear-drop Profile)
6 www.intercononline.comToll Free: 1-800 665-6655
WELD-ON HINGESSTEEL
STEEL WITH GREASE FITTINGGREASE FITTING:• Made from special profile steel for
weld-on applications • Esthetic half-round heads and 360°
rotation of V-shaped flanges allow for ease of weld-on installation
• Brass washer on each hinge permits smooth continuous operation
• Zirc fitting allows for additional lubrication (grease) to be applied to hinges with high duty cycles, exposure to intermittent moisture or high humidity
FIXED PIN TYPE:FES - Mild Steel (1015) with case-hardened steel pin and
brass washer
FMS♦ - Mild Steel (1015) with brass pin and brass washer
• Made from special profile steel for weld-on applications
• Esthetic half-round heads and 360° rotation of V-shaped flanges allow for ease of weld-on installation
• Brass washer on each hinge permits smooth continuous operation
FIXED PIN TYPE:FES-GF - Mild Steel (1015) with case hardened steel pin, brass
washer and grease fitting
FMS-GF♦ - Mild Steel (1015) with brass pin and brass washer
ModelSteel Pin
Model♦Brass Pin
LLengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Pair
lbs. *
FES050 FMS050 2” 5/16” - 13/32” 3/16” 150
FES060 FMS060 2.3/8” 13/32” - 15/32” 1/4” 185
FES070 n/a 2.3/4” 7/16” - 17/32” 9/32” 185
FES080 FMS080 3.3/16” 1/2” - 5/8” 5/16” 300
FES090 n/a 3.1/2” 9/16” - 23/32” 11/32” 300
FES100 FMS100 4” 5/8” - 3/4” 13/32” 440
FES120 n/a 4.3/4” 5/8” - 3/4” 7/16” 440
FES135 n/a 5.1/4” 23/32” - 29/32” 15/32” 550
FES150 FMS150 6” 3/4” - 1” 1/2” 650
FES180 FMS180 7” 3/4” - 1” 9/16” 650
FES200 FMS200 8” 29/32” - 1.1/8” 5/8” 800
FES260 n/a 10” Available with Grease Fitting only: See table below
ModelSteel Pin
Model♦Brass Pin
LLengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Pair
lbs. *FES060GF n/a 2.3/8” 13/32” - 15/32” 1/4” 185
FES080GF FMS080GF 3.3/16” 1/2” - 5/8” 5/16” 300
FES100GF FMS100GF 4” 5/8” - 3/4” 13/32” 440
FES120GF FMS120GF 4.3/4” 5/8” - 3/4” 7/16” 440
FES150GF FMS150GF 6” 3/4” - 1” 1/2” 650
FES200GF FMS200GF 8” 29/32” - 1.1/8” 5/8” 800
FES260GF FMS260GF 10” 1.1/8” - 1.7/16” 3/4” 1000
♦Model Brass Pins’ load capacity is 20% less than listed*Please See Page 8 for Notice regarding printed weight loads
7www.intercononline.com Toll Free: 1-800 665-6655
WELD-ON HINGESALUMINUM
STAINLESS STEEL
STEEL 3 PIECE HEAVY DUTY
FIXED PIN TYPE:ALU - Aluminum (6063) with stainless
steel pin and stainless washer
• Made from special profile aluminum for weld-on applications
• Esthetic half-round heads and 360° rotation of V-shaped flanges allow for ease of weld-on installation
• With stainless washer
FIXED PIN TYPE:V2A - Stainless steel (304) with
stainless steel pin and stainless washer
• Made from special profile stainless steel for weld-on applications
• Esthetic half-round heads and 360° rotation of V-shaped flanges allow for ease of weld-on installation
• With stainless washer
REMOVABLE PIN TYPE:A3E - Mild Steel (1015) with case
hardened steel pin and brass washers. A locking “snap ring” washer at the end of the removable pin, keeps the pin in place.
• Made from special profile steel for weld-on applications
• Pin with half-round head and sections with V-shaped flanges allow for ease of weld-on installation
• With brass washers
ModelModelGrease Fitting
LLengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Pair
lbs. *ALU060 n/a 2.3/8” 13/32” - 15/32” 1/4” 200
ALU080 ALU080GF 3.3/16” 1/2” - 5/8” 5/16” 350
ALU100 ALU100GF 4” 5/8” - 3/4” 13/32” 500
ALU150 ALU150GF 6” 3/4” - 1” 1/2” 650
ModelModelGrease Fitting
LLengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Pair
lbs. *V2A060 n/a 2.3/8” 13/32” - 15/32” 1/4” 400
V2A080 V2A080GF 3.3/16” 1/2” - 5/8” 5/16” 600
V2A100 V2A100GF 4” 5/8” - 3/4” 13/32” 750
V2A150 V2A150GF 6” 3/4” - 1” 1/2” 900
V2A200 V2A200GF 8” 29/32” - 1.1/8” 5/8” 1200
ModelL
Lengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Hinge
lbs. *A3E135 5.1/4” 23/32” - 29/32” 15/32” 1500
A3E150 6” 3/4” - 1” 1/2” 2000
A3E200 8” 29/32” - 1.1/8” 5/8” 4000
L D
Sd
*Please See Page 8 for Notice regarding printed weight loads
8 www.intercononline.comToll Free: 1-800 665-6655
WELD-ON HINGESSTEEL REMOVABLE PIN• 2 Piece hinge with removable pin• Made from special profile steel for
weld-on applications• Pin with half-round head and
sections with V-shaped flanges allow for ease of weld-on installation
• With brass washer
*IMPORTANT: The printed weight loads should be used as a general guideline only. Load compensation should be made when determining the size and number of hinges for applications that may be subject to dynamic forces (shock loads), areas where the pin is set in a horizontal position, and other uses that create extra pin stress (ie. long gates, wide doors, etc.). Addition of heat-resistant molybdenum or lithium-based greases to the hinge’s internal body before final assembly is recommended and may provide freer movement and a longer life. No guarantee for weight loads and dimensions.
REMOVABLE PIN TYPE:AES - Mild steel (1015) with removable steel pin and brass
washer
ModelL
Lengthinches
D/SCross Section
inches
dPin Diameter
inches
Weight LoadPer Pair
lbs. *AES050 2” 5/16” - 13/32” 3/16” 110
AES080 3.3/16” 1/2” - 5/8” 5/16” 240
AES100 4” 5/8” - 3/4” 13/32” 420
AES150 6” 3/4” - 1” 1/2” 530
AES200 8” 29/32” - 1.1/8” 5/8” 660
L
D
Sd
9www.intercononline.com Toll Free: 1-800 665-6655
Model Hinge LengthA
WidthB
ThicknessC
Knuckle Dia.D
Pin Dia.E
Box Qty.
H18-050 2” x 2” 2.0” 2.0” 0.098” 0.395” 0.197” 20
H18-075 3” x 3” 3.0” 3.0” 0.108” 0.492” 0.276” 20
H18-100 4” X 4” 4.0” 4.0” 0.138” 0.552” 0.276” 20
H18-125 5” x 5” 5.0” 5.0” 0.157” 0.630” 0.315” 10
WELD-ON BUTT HINGESH18 - STEEL HEAVY DUTYHeavy-duty design with non-removable pin and five knuckles in plain steel for applications such as steel doors, industrial equipment, access panels, toolboxes, cabinets, gates, etc. A non-swaged hinge specifically designed for weld-on applications with no holes to fill and a professional appearance in 4 common sizes.
B
D
A
E Ø
C
Fast Spun Both Ends
C
10 www.intercononline.comToll Free: 1-800 665-6655
WELD-ON FLAG HINGESKOS & K3S - MILD STEELThe weld-on flag hinge is used for applications similar to those of a regular hinge, but where a flap is required. Applications range from thin access doors to heavy-duty fire doors. The 3-piece design is especially suited to heavy container doors and flaps.
2 PIECE HINGES - KOS SERIESMild Steel Hinge with Chromed Steel Pin & Plug
a d b e f #redrO
htgneL .aiDniP htdiWpalF ssenkcihT htgneLpalF SOK
mm001-"4 mm9-"23/11 mm03-"61/31 mm3-"021.0 mm05-"2 001SOK
mm041-"2/15 mm41-"61/9 mm05-"2 mm4-"751.0 mm07-"4/32 041SOK
mm061-"4/16 mm61-"8/5 mm05-"2 mm5-"002.0 mm08-"61/33 061SOK
a
f
d Ø
e e
b
a
f
d Ø
e e
b
3 PIECE HINGES - K3S SERIESMild Steel Hinge with Chromed Steel Pin & Plug
a d b e f #redrO
htgneL .aiDniP htdiWpalF ssenkcihT htgneLpalF S3K
mm022-"8/58 mm41-"61/9 mm05-"2 mm4-"751.0 mm07-"4/32 022S3K
mm062-"4/101 mm61-"8/5 mm05-"2 mm5-"002.0 mm08-"61/33 062S3K
mm003-"21 mm02-"4/3 mm05-"2 mm6-"632.0 mm001-"4 003S3K
11www.intercononline.com Toll Free: 1-800 665-6655
EGNIHYTUD-YVAEH29H
nO-dleWytuD-yvaeHleetSdegroF"6egniHreniatnoC
#redrO
0W1.051.29H
CONTAINER HINGEH92 - FORGED STEEL HEAVY DUTYThe H92 is an extremely heavy-duty forged weld-on hinge with grease fitting that can be used for containers (i.e. garbage), trailers and ramps. The forged flaps and 3/4” (20 mm) shaft make it one of the most heavy-duty hinges available.
12 www.intercononline.comToll Free: 1-800 665-6655
GATE HINGEH77 - HEAVY DUTY - MILD STEELThe H77 weld-on gate hinge is specifically designed for steel gates. There are four different pin diameters ranging from 1/2” to 1” for a variety of applications including gate doors; both walk-through and drive-through. The easy weld-on application and adjustability of the nut make this hinge very attractive. The H77 is very strong and gives a professional look.
H77 GATE HINGE - Mild Steel with Galvanized Bolt, Nuts, Washers, Pin and Brass BushingsPin Dia.
(d)Eye Width
(A) Thickness H1 B L H2 LoadPer Pair Order #
1/2” 1.1/16” 3/16” 1” 1.3/4” 1.3/8” - 3.3/16” 1.9/16” - 2.5/16” 440 lbsH77.012.1W0
12mm 17mm 5mm 25mm 45mm 34 - 80mm 40 - 59mm 200 kgs
5/8” 1” 5/16” 1.1/8” 2.1/8” 1” - 3.5/8” 2.1/8” - 2.11/16” 660 lbsH77.016.1W0
16mm 25mm 8mm 28mm 54mm 25 - 93mm 54 - 68mm 300 kgs
3/4” 1.3/16” 5/16” 1.3/8” 3.1/8” 1.3/8” - 4” 3.7/16” - 4.3/16” 990 lbsH77.020.1W0
20mm 30mm 8mm 35mm 79mm 35 - 100mm 87 - 107mm 450 kgs
1” 1.3/8” 13/32” 1.3/8” 3.1/8” 1.9/16” - 4.3/8” 3.1/2” - 4.9/32” 1320 lbsH77.024.1W0
24mm 34mm 10mm 35mm 79mm 40 - 12mm 89 - 109mm 600 kgs
13www.intercononline.com Toll Free: 1-800 665-6655
FORGED STEEL, STEEL, ALUMINUM, STAINLESS & GALVANIZEDThe G03 handle is available in forged steel for weld-on applications such as farm equipment and bins.
ELDNAH30G
eldnaHleetSdegroFdehsinifnUsnoitacilppAnO-dleWrof
#redrO
0W1.002.30G
The G10 chest handle in galvanized steel for bolt-on applications is ideal for boxes, crates, equipment and cases.
ELDNAH01G
eldnaHtsehCnO-tloBleetSdezinavlaGni
#redrO
0X3.531.01G
HANDLES
These round bodied weld-on handles can be used on doors, gates, access panels, storage boxes and other fabrications. The flattened ends can also be drilled for screw-on and bolt-on applications.
Handles Models Material Dia.A
Handle LengthB
HeightC
O.A.L.D Order #
G04 (STEEL) 1/2” 8” 2” 13” G04.330.1WO
G05 (ALUMINUM) 1/2” 8” 2” 13” G05.330.2WO
G06 (STAINLESS) 1/2” 8” 2” 13” G06.330.9WO
CA
D
B
14 www.intercononline.comToll Free: 1-800 665-6655
LATCH HOOKS - GALVANIZED & STAINLESS STEEL
Depending on the application, choose your required hook;either Type C or D.
C Hook
D Hook
HOOKS FOR L11, L21 & L22 DRAW LATCHES
Style & Latch B L S H d e1 e2
Order #GALVANIZED STAINLESS
C Hook for L111/2” 1.1/8” 1/16” 5/16” 1/8” 5/16” 3/8”
L10.C13.3X0 L10.C13.9X013mm 28mm 1.5mm 8mm 3.7mm 8mm 9.5mm
D Hook for L111/2” 1.3/16” 1/16” 3/16” 1/8” 5/16” 3/8”
L10.D13.3X0 L10.D13.9X013mm 30mm 1.5mm 4.3mm 3.7mm 8mm 9.5mm
C Hook for L21/L221.1/8” 1.7/16” 1/8” 7/16” 3/16” 1/4” 7/16”
L20.C28.3XS L20.C28.9X028mm 37mm 3mm 11.5mm 4.1mm 7mm 11mm
D Hook for L21/L221.1/8” 1.3/4” 1/8” 3/8” 3/16” 1/4” 7/16”
L20.D28.3X0 L20.D28.9X028mm 45mm 2mm 9mm 4.3mm 7mm 11mm
L11, L21 & L22 DRAW LATCHES
Style L B H I b h b1 d1 fOrder #
GALVANIZED STAINLESS
L112.1/8” 7/8” 3/8” 1.7/16” 7/16” 5/16” 5/8” 1/8” 1/4”
L11.055.3X0 L11.055.9X055mm 23mm 10mm 36mm 11mm 8mm 16mm 3mm 10mm
L214.5/16” 1.1/2” 7/16” 2.7/8” 3/4” 7/16” 1.1/8” 3/16” 9/16”
L21.110.3X0 L21.110.9X0110mm 38mm 11mm 73mm 20mm 11mm 28mm 4mm 14mm
L224.5/16” 1.1/2” 15/16” 2.7/8” 3/4” 7/16” 1.1/8” 3/16” 9/16”
L22.110.3X0 L22.110.9X0110mm 38mm 24mm 73mm 20mm 11mm 28mm 4mm 14mm
NON-ADJUSTABLE DRAW LATCHESGALVANIZED & STAINLESS STEELThese latches are a non-adjustable type. Two sizes (3 models) available in galvanized and stainless steel.
L11
L21
L22
HL
S
B
d
e1 e2
L10CC Hook for L11
H
L
S
B
d
e1 e2
L10DD Hook for L11
HL
S
B
d
e1 e2
L20CC Hook for L21/L22
L20DD Hook for L21/L22
H
L
S
B
d
e1 e2
15www.intercononline.com Toll Free: 1-800 665-6655
ADJUSTABLE DRAW LATCHES
LATCH HOOKS - GALVANIZED & STAINLESS STEEL
HOOKS FOR L32 & L26 DRAW LATCHES
Style & Latch B L S H d e1 e2
Order #GALVANIZED STAINLESS
C Hook for L3223/32” 7/8” 1/8” 3/8” 3/16” 3/8” -
L30.C18.3X0 L30.C18.9X018mm 23mm 2mm 10mm 4.1mm 9mm -
D Hook for L3223/32” 2” 1/8” 5/16” 3/16” 1/4” 7/8”
L30.D18.3X0 L30.D18.9X018mm 50mm 2mm 8mm 4.1mm 7mm 21mm
C Hook for L261.1/8” 1.7/16” 1/8” 7/16” 3/16” 1/4” 7/16”
L20.C28.3XS L20.C28.9X028mm 37mm 3mm 11.5mm 4.1mm 7mm 11mm
D Hook for L261.1/8” 1.3/4” 1/8” 3/8” 3/16” 1/4” 7/16”
L20.D28.3X0 L20.D28.9X028mm 45mm 2mm 9mm 4.3mm 7mm 11mm
Depending on the application, choose your required hook;either Type C or D.
C Hook
D Hook
L32 & L26 DRAW LATCHES
Style L B H I b h b1 d1 f d e1 e2 MOrder #
GALVANIZED STAINLESS
L324.15/16” 1.5/16” 3/4” 2.3/8” 1.1/16” 11/16” 3/4” 3/16” 1.7/8” 3/16” 5/16” 1.5/8”
M6 L32.125.3X0 L32.125.9X0125mm 33mm 18mm 60mm 26mm 17mm 20mm 5mm 48mm 4.3mm 8mm 43mm
L265.3/4” 1.13/16” 7/8” 2.3/4” 1.1/4” 7/8” 1.3/16” 1/4” 1.9/16” 1/4” 3/8” 1.1/8”
M8 L26.145.3X0 n/a145mm 46mm 22mm 70mm 32mm 22mm 30mm 6.5mm 40mm 6.2mm 10mm 30mm
The L32 is the most common adjustable draw latch and is available in both galvanized and stainless steel. It is used for cladding, boxes and equipment.The L26 adjustable draw latch is for applications requiring a forceful latch with a forged hook. This heavier duty model has a lockable padlock eye and comes in a galvanized finish only.
L26
L32
GALVANIZED & STAINLESS STEEL
H
L
S
B
d
e1 e2
L30DD Hook for L32
HL
S
B
d
e1 e2
L20CC Hook for L26
L20DD Hook for L26
H
L
S
B
d
e1 e2
HL
S
B
d
e1
L30CC Hook for L32
16 www.intercononline.comToll Free: 1-800 665-6655
HOOKS & D-RINGSC03 -CONTAINER HOOK - GALVANIZED STEEL
“D” RINGS
The C03 container hook is ideal for trucks, trailers, railroad cars, and machinery. It can be inserted into the surface for a flush installation. The C03 is made of galvanized steel.
These Heavy Duty “D” Rings have a multitude of uses. They are used primarily as temporary lifting (suspension) points on unwieldy structures and fabrications.
The “D” Rings are also used for ‘tie-down” points on similar objects for secure transport. Available in Weld-On (DRW) and Bolt-On (DRB) models.
KOOHRENIATNOC3OC
4” Container Hook - Galvanized Steel
#redrO
0X3.201.30C
.275”
3.75”
1.375”4”
.875”
.125”.375”
WELD-ON “D” RINGS
A B C D E Order #3.38” 3.50” 2.00” 0.500” 0.250” DRW 0.500
4.25” 4.25” 2.50” 0.625” 0.375” DRW 0.625
4.50” 4.50” 2.50” 0.750” 0.375” DRW 0.750
5.00” 6.00” 2.50” 1.000” 0.375” DRW 1.000
BOLT-ON “D” RINGS
A B D F G H I Order #3.38” 3.50” 0.500” 1.75” 3.25” 0.250” 0.500” DRB 0.500
4.25” 4.25” 0.625” 2.25” 3.75” 0.375” 0.500” DRB 0.625
H
G
D
I
FA
B
E
CD
A
B
17www.intercononline.com Toll Free: 1-800 665-6655
HOOKSC02 - ROPE HOOK - STEEL
ASH HOOK - FORGED STEEL
The C02 weld-on rope hook in cast steel is used for trucks, trailers, railroad cars, and machinery.
The ASH weld-on hooks are used for trucks, trailers, railroad cars, and machinery. It comes with a safety clip to prevent accidental removal. Four sizes are available.
KOOHEPORNO-DLEW2OC
leetSnikooHepoRnO-dleW"2/15
#redrO
0W1.041.20C
ASH Weld-On Hook
elytS LWSmaeSdleW
aL1 Bx 1 B2 C H1 H2 L2 thgieW #redrO
ASH 0.5
ASH 1.5
ASH 2.5
ASH 4.0
bl0022gk0001
"8/1mm4
"1x"61/93mm52xmm09
"8/5mm71
"61/51mm42
"4/1mm6
"3mm67
"8/7mm22
bl9.0gk4.0
4010.0014
bl0066gk0003
"61/3mm5
"8/31x"8/15mm53xmm031
"61/51mm42
"8/11mm92
"61/5mm8
"8/14mm501
"8/11mm82
bl57.2gk52.1
5300.0014
bl00011gk0005
"61/3mm5
"4/31x"61/56mm54xmm061
"61/31mm03
"61/71mm73
"8/3mm01
"61/35mm231
"8/71mm74
bl81.5gk53.2
6300.0014
bl00671gk0008
"4/1mm7
"2x"61/116mm05xmm071
"61/91mm04
"8/71mm74
"8/3mm01
"61/75mm831
"2mm05
bl49.7gk6.3
7300.0014
4”
5.1/2”
2.9/16”
18 www.intercononline.comToll Free: 1-800 665-6655
WELD-ON-HINGES COUNTER-TOP DISPLAY
FES200 - (8” O.A.L.)FES150 - (6” O.A.L.)FES100 - (4” O.A.L.)FES080 - (3.3/16” O.A.L.)FES050 - (2” O.A.L.)
Hinges packaged 25pcs/box
The counter-top display makes the hinges more visible to customers!
(Size: only 9” W x 15” L)
* Receive a FREE counter-top display and literature when orderingthe standard assortment of the 5 most commonly used mild steel sizes (12 FES Hinge sizes available overall - see page 6 for hinge details)
STANDARD START-UP INVENTORY FOR NEW DISTRIBUTORS*
19www.intercononline.com Toll Free: 1-800 665-6655
TERMS & CONDITIONS OF SALEPricing:All prices and discounts are subject to change without prior notice.
Freight:All shipments are F.O.B. Intercon Enterprises Inc. (Intercon’s Warehouse).
Terms:VISA, MasterCard or American Express, unless credit has been approved by Intercon. All credit approved account terms are NET 30 DAYS from date of invoice. Past due accounts are liable to an interest charge of 2% per month. Intercon reserves the right to withhold shipment of orders if an account is not up-to-date.
Claims:Intercon is not responsible for goods lost or damaged in transit. Intercon will furnish all available information, trace shipments to destination whenever possible to assist the purchaser in filing a claim. Shortages in shipment not chargeable against the carrier must be claimed within 5 days of receipt of merchandise.
Returned Goods:No merchandise may be returned or exchanged without proof of purchase and prior authorization by Intercon. Authorized returns must be shipped prepaid to Intercon and be received by the seller within 30 days. All items accepted for credit are subject to a 20% restocking charge.
Delivery:Intercon is not responsible for nondelivery or delay in delivery due to delays, damages or losses resulting from strikes, riots, floods, inability to secure materials or other accidents or occurrences beyond their control.
Minimum Order:$100.00 net price (excluding freight).
Standard Packages:Minimum packages are indicated in the price schedule.
Drawings:All drawings and dimensions shown in this catalog are for reference only.
Miscellaneous:Title of goods remains with Intercon until such time as same are paid in full. In the event of default payment, Intercon shall be permitted to retake possession of the goods without either notice or prejudice to any other rights and remedies available to Intercon.
Quotations:All quotations are firm for 30 days only.
Copyright © 2011 Intercon Enterprises Inc. - All Rights Reserved
www.intercononline.com
1-800 665-6655Tel: (604) 946-6066Fax: (604) 946-5340
E-mail: sales@intercononline.com
11-7550 River Rd.Delta, BC V4G 1C8
Canada
1125 Fir Ave.Blaine, WA 98230
U.S.A