ALUMINIUM SHUTTERS ALU-LNTL Model Our ALU-LNTL model of roller shutter is made from an aluminum matrix and expanded polystyrene closed cell insulation. The polystyrene infill helps control the climate of the premises whilst also providing an additional barrier against unwanted noise, particularly at night. The double wall aluminum slats are also particularly effective at repelling burglars. The ALU-LNTL can also be zintel coated to BS EN 10131:2006 to combat any possible corrosion with a powder coated finish to any colour adding yet another barrier making them excellent in saline conditions such as coastal locations. What makes this product especially unique is its inbuilt lintel and guide system enabling the shutter to be completely hidden if incorporated into a new build structure. See below for diagrams and pictures

Technical Information

Certification

CE Mark Declaration of conformity

Mechanical Aspects

EN12604, Safety in use of power operated doors

Side Guide Protection

EN12604: 2000 4.5.1 and EN 12453: 2000

5.1.1.3

Protection Against crushing, shearing or drawing in

Electrical Safety Depending on use

Water Tightness EN 12489

Resistance to Windload

EN12444

Thermal Resistance

EN 12428

Air Permeability EN12427

Opto Safety Edge Self-Monitoring

EN12453 – 5.1.1.5

Anti-fall back device

EN 12453 – 5.1.1.5

Installation Instructions

EN12635: 2002 4.1.1.1

Durability of Mechanical

Performance

EN 12635: 2002 4.1.1.1

Example showing the shutter’s inbuilt lintel system meaning the shutter can be incorporated as part of the actual

building structure

Lintel Construction Lintel System

Above: Example of inbuilt lintel in a photograph. Below: You can see the lintel/roller shutters in place before

plasterboardng

Example of Curved Lintels

Example of 4 ALU-LNTL in a row

Example of future project

Rivenhall Golf Club