ALUMINIUM SHUTTERS · ALUMINIUM SHUTTERS ALU-LNTL Model Our ALU-LNTL model of roller shutter is...
5
ALUMINIUM SHUTTERS ALU-LNTL Model Our ALU-LNTL model of roller shutter is made from an aluminum matrix and expanded polystyrene closed cell insulation. The polystyrene infill helps control the climate of the premises whilst also providing an additional barrier against unwanted noise, particularly at night. The double wall aluminum slats are also particularly effective at repelling burglars. The ALU-LNTL can also be zintel coated to BS EN 10131:2006 to combat any possible corrosion with a powder coated finish to any colour adding yet another barrier making them excellent in saline conditions such as coastal locations. What makes this product especially unique is its inbuilt lintel and guide system enabling the shutter to be completely hidden if incorporated into a new build structure. See below for diagrams and pictures Technical Information Certification CE Mark Declaration of conformity Mechanical Aspects EN12604, Safety in use of power operated doors Side Guide Protection EN12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3 Protection Against crushing, shearing or drawing in Electrical Safety Depending on use Water Tightness EN 12489 Resistance to Windload EN12444 Thermal Resistance EN 12428 Air Permeability EN12427 Opto Safety Edge Self-Monitoring EN12453 – 5.1.1.5 Anti-fall back device EN 12453 – 5.1.1.5 Installation Instructions EN12635: 2002 4.1.1.1 Durability of Mechanical Performance EN 12635: 2002 4.1.1.1
Transcript of ALUMINIUM SHUTTERS · ALUMINIUM SHUTTERS ALU-LNTL Model Our ALU-LNTL model of roller shutter is...
ALUMINIUM SHUTTERS ALU-LNTL Model Our ALU-LNTL model of roller shutter is made from an aluminum matrix and expanded polystyrene closed cell insulation. The polystyrene infill helps control the climate of the premises whilst also providing an additional barrier against unwanted noise, particularly at night. The double wall aluminum slats are also particularly effective at repelling burglars. The ALU-LNTL can also be zintel coated to BS EN 10131:2006 to combat any possible corrosion with a powder coated finish to any colour adding yet another barrier making them excellent in saline conditions such as coastal locations. What makes this product especially unique is its inbuilt lintel and guide system enabling the shutter to be completely hidden if incorporated into a new build structure. See below for diagrams and pictures
Technical Information
Certification
CE Mark Declaration of conformity
Mechanical Aspects
EN12604, Safety in use of power operated doors
Side Guide Protection
EN12604: 2000 4.5.1 and EN 12453: 2000
5.1.1.3
Protection Against crushing, shearing or drawing in
Electrical Safety Depending on use
Water Tightness EN 12489
Resistance to Windload
EN12444
Thermal Resistance
EN 12428
Air Permeability EN12427
Opto Safety Edge Self-Monitoring
EN12453 – 5.1.1.5
Anti-fall back device
EN 12453 – 5.1.1.5
Installation Instructions
EN12635: 2002 4.1.1.1
Durability of Mechanical
Performance
EN 12635: 2002 4.1.1.1
Example showing the shutter’s inbuilt lintel system meaning the shutter can be incorporated as part of the actual
building structure
Lintel Construction Lintel System
Above: Example of inbuilt lintel in a photograph. Below: You can see the lintel/roller shutters in place before
plasterboardng
Example of Curved Lintels
Example of 4 ALU-LNTL in a row
Example of future project
Rivenhall Golf Club
