Post on 05-Feb-2018
2
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
C o o l i n g S i m p l i f i e d
www.mechatronics.com
Mechatronics Fan Group
has been delivering
thermal management
solutions to a wide range of
applications for over 30 years.
Our extensive North American
inventory, value-add assembly,
technical sales, and design
support teams will accelerate your
time to market. Mechatronics is
a thermal management leader
supplying a broad range of
standard and custom AC Fans,
DC Fans, Blowers, Impellers
and accessories. Mechatronics
provides the right solution on time
with quality product to help our
customers meet their goals.
AC and DC Fans & Blowers
Value Add(see page 60)
Experience | Flexibility | Quality | Timely
TOC
TABLE OF CONTEN
TS
Warranty, Errors & OmissionsMechatronics Fan Group of Mechatronics, Inc. assumes no responsibility for errors or omissions in this catalog. Mechatronics reserves the right to change information or specifications without notice. Application and use of this product is the sole responsibility of the user, however our personnel will advise you of guidelines for the proper parameters of use of the product. Mechatronics warrants the product to be free from defects in materials and workmanship only. Sellers only obligation hereunder is to either repair or replace the defective product or work within 12 months of product delivery to our customers. No other warranties are expressed or implied in fact or by law. Mechatronics is not liable for associated costs of work done by the buyer involving our product, or altered product.
©Copyright 201 Mechatronics Fan Group
DC AXIAL FANSDC AXIAL PART NUMBERING SYSTEM ...................... 2MA2506 (25 x 25 x 6.1 mm) 0.98 x 0.98 x 0.24 in. ...... 3MA3010 (30 x 30 x 10 mm) 1.18 x 1.18 x 0.39 in. ........ 3MA3828 (38 x 38 x 28 mm) 1.50 x 1.50 x 1.10 in. ....... 4G4010 (40 x 40 x 10.3 mm) 1.57 x 1.57 x 0.41 in. ...... 4G4015 (40 x 40 x 15 mm) 1.57 x 1.57 x 0.59 in. ...... 5G4020 (40 x 40 x 20 mm) 1.57 x 1.57 x 0.79 in. ...... 5MD4028 (40 x 40 x 28 mm) 1.57 x 1.57 x 1.10 in. ....... 6M5010 (50 x 50 x 10 mm) 1.97 x 1.97 x 0.39 in. ....... 6G5015 (50 x 50 x 15 mm) 1.97 x 1.97 x 0.59 in. ....... 7 M5210 (52 x 52 x 10 mm) 2.04 x 2.04 x 0.39 in. ...... 7MB6010 (60 x 60 x 10 mm) 2.36 x 2.36 x 0.39 in. ...... 8G6015-G (60 x 60 x 15 mm) 2.36 x 2.36 x 0.60 in. ...... 8MD6020 (60 x 60 x 20 mm) 2.36 x 2.36 x 0.79 in. ...... 9F6025-H (60 x 60 x 25 mm) 2.36 x 2.36 x 0.98 in. ...... 9ME6038 (60 x 60 x 38 mm) 2.36 x 2.36 x 1.50 in. ...... 10MQ6038 (60 x 60 x 38 mm) 2.36 x 2.36 x 1.50 in. ...... 10G8015-G (80 x 80 x 15 mm) 3.15 x 3.15 x 0.59 in. ....... 11G8020 (80 x 80 x 20 mm) 3.15 x 3.15 x 0.79 in. ....... 11F8025-H (80 x 80 x 25 mm) 3.15 x 3.15 x 0.98 in. ....... 12G8032 (80 x 80 x 32 mm) 3.15 x 3.15 x 1.26 in. ........ 12MC8038 (80 x 80 x 38 mm) 3.15 x 3.15 x 1.50 in. ....... 13MQ8038 (80 x 80 x 38 mm) 3.15 x 3.15 x 1.50 in. ....... 13E9225 (92 x 92 x 25 mm) 3.62 x 3.62 x 0.98 in. ...... 14G9225-G (92 x 92 x 25 mm) 3.62 x 3.62 x 0.98 in. ...... 14G9232 (92 x 92 x 32 mm) 3.62 x 3.62 x 1.24 in. ...... 15MD9238 (92 x 92 x 38 mm) 3.62 x 3.62 x 1.50 in. ...... 15E1225 (120 x 120 x 25 mm) 4.72 x 4.72 x 0.98 in. ...... 16G1225 (120 x 120 x 25 mm) 4.72 x 4.72 x 0.98 in. ...... 16G1238 (120 x 120 x 38 mm) 4.69 x 4.69 x 1.50 in. ...... 17 MD1238 (120 x 120 x 38 mm) 4.72 x 4.72 x 1.50 in. ...... 17MQ1238 (120 x 120 x 38 mm) 4.72 x 4.72 x 1.50 in. ...... 18G1338 (127 x127 x 38 mm) 5.0 x 5.0 x 1.50 in. .......... 18MA1751 (172 x 150 x 50.8 mm) 6.77 x 5.91 x 2.0 in. ........ 19MM1865 (180 x 180 x 65 mm) 7.09 x 7.09 x 2.56 in. ...... 19MM2072 (208 x 208 x 72 mm) 8.19 x 8.19 x 2.83 in. ....... 20MM2260 (222 dia. x 60 mm) 8.74 dia. x 1.50 in. .......... 20MM2280 (222 dia. x 80 mm) 8.74 dia. x 3.15 in. .......... 21MM2589 (255 dia. x 89 mm) 10.04 dia. x 3.50 in. ........ 21MM22580H (225 x 225 x 80 mm) 8.86 x 8.86 x 3.15 in....... 22MM28080H (280 x 280 x 80 mm) 11.02 x 11.02 x 3.15 in..... 22
DC BLOWERSB5015 (51 x 51 x 15 mm) 2.01 x 2.01 x .62 in. ........ 23B6025 (60 x 60x 25 mm) 2.36 x 2.36 x 0.98 in. ...... 23B7530 (76 x 76 x 30 mm) 2.98 x 2.98 x 1.18 in. ...... 24MXB9733 (97 x 94.4 x 33 mm) 3.82 x 3.72 x 1.30 in. ...... 24B1232 (120 x 120 x 32 mm) 4.70 x 4.70 x 1.24 in. ...... 25B1232-SR (125 x 125x 33.5 mm) 4.92 x 4.92 x 1.32 in. ....... 25DC ENGINEERING ........................................................... 26
AC AXIAL FANSAC AXIAL PART NUMBERING SYSTEM .......................... 27UF60D (60 x 60 x 30 mm) 2.36 x 2.36 x 1.18 in. ......... 28UF80B (80 x 80 x 25 mm) 3.15 x 3.15 x 0.98 in. ........... 28UF80A (80 x 80 x 38 mm) 3.15 x 3.15 x 1.50 in. .......... 29UF92B (92 x 92 x 25 mm) 3.62 x 3.62 x 0.98 in. ......... 29UF92A (92 x 92 x 38 mm) 3.62 x 3.62 x 1.50 in. ......... 30 UF92AM (92 x 92 x 38 mm) 3.62 x 3.62 x 1.50 in. .......... 30UF12B (120 x 120 x 25 mm) 4.69 x 4.69 x 0.98 in. .......... 31 UF12A (120 x 120 x 38 mm) 4.69 x 4.69 x 1.50 in. ......... 31UF12AR (120 x 120 x 38 mm) 4.69 x 4.69 x 1.50 in. ......... 32UF12AM (120 x 120 x 38 mm) 4.69 x 4.69 x 1.50 in. ......... 32UF13A (127 x 127 x 38 mm) 5.0 x 5.0 x 1.50 in. ............. 33UF15AC (172 x 150 x 38 mm) 6.77 x 5.91 x 1.50 in. ......... 33UF15PC (172 x 150 x 51 mm) 6.77 x 5.91 x 2.0 in. ........... 34UF15KC (172 x 150 x 55 mm) 6.77 x 5.91 x 2.17 in. .......... 34UF15KM (172 x 150 x 55 mm) 6.77 x 5.91 x 2.17 in. .......... 35UF15KMR (172 x 150 x 55 mm) 6.77 x 5.91 x 2.17 in. .......... 35UF17PC (172 dia. x 51 mm) 6.77 dia. x 2.0 in. ............... 36UF16FC (160 x 160 x 62 mm) 6.30 x 6.30 x 2.44 in. ......... 36UF18JC (180 x 180 x 90 mm) 7.09 x 7.09 x 3.54 in. ......... 37UF20JC (205 x 205 x 90 mm) 8.07 x 8.07 x 3.54 in. ......... 37UF25GC (254 dia. x 89 mm) 10.0 dia. x 3.50 in. ............. 38UF25HC (254 dia. x 107 mm) 10.0 dia. x 4.21 in. ............. 38UF200BMB-H2 (225 x 225 x 80 mm) 8.86 x 8.86 x 3.15 in. ... 39UF250BMB-H1 (280 x 280 x 80 mm) 11.0 x 11.0 x 3.15 in. .... 40UF300BNA ( 398 dia x 98.3 mm) 15.67 dia x 3.87 in. ............ 41AC ENGINEERING .............................................................. 42
AC BLOWERSAC BLOWERS/IMPELLERS PART NUMBERING SYSTEM 43UF90DPB (120 x 120 x 37 mm) 4.72 x 4.72 x 1.46 in. ....... 44UF160DPB (220 x 220 x 56.2 mm) 8.66 x 8.66 x 2.21 in. ....... 44
AC IMPELLERSUF133(72) (133 dia. x 91 mm) 3.62 x 3.62 x 1.5 in. .. 45UF133(91)APA (133 dia. x 91 mm) 5.22 dia. x 3.60 in. ... 45UF175AMA (175 dia x 55 mm) 6.89 dia. x 2.16 in. .... 46UF180APA (182 dia. x 84.9 mm) 7.18 dia. x 3.34 in. .... 46UF180(55)APA (182 dia. x 55 mm) 7.18 dia. x 2.17 in. ...... 47UF190APA (190 dia. x 70 mm) 7.48 dia. x 2.75 in. .... 47UF190APA-F (235 dia. x 87.2 mm) 9.25 dia. x 3.43 in. .... 48UF220APA (223 dia. x 71 mm) 8.78 dia. x 2.79 in. .... 48UF220APA-F (259 dia. x 97.8 mm) 10.20 dia. x 3.83 in. .. 49UF225(69)APA (255 dia. x 69 mm) 8.86 dia. x 2.72 in. .... 49UF225(85)APA (225 dia. x 85 mm) 8.86 dia. x 3.35 in. ... 50UF225(99)APA (225 dia. x 99 mm) 8.86 dia. x 3.90 in. ... 50UF225(99)APA-F (259 dia. x 117 mm) 10.20 dia. x 4.62 in. .. 51UF250APA (251 dia. x 98 mm) 9.90 dia. x 3.86 in. ... 51UF250APA-F (259 dia. x 131 mm) 10.20 dia. x 5.15 in. .. 52UF318AAA (318 dia. x 154 mm) 12.5 dia. x 6.08 in. .... 52UF360AAA (360 dia. x 167.3 mm) 14.17 dia. x 6.59 in. .. 53UF400AAA (400 dia. x 162.4 mm) 15.75 dia. x 6.39 in. .. 53AC ENGINEERING .............................................................. 54
ACCESSORIESACCESSORIES OFFERING ................................................. 55IP55 FILTERS ........................................................................ 56FINGER GUARDS ............................................................... 58CORDS ................................................................................. 59
VALUE ADDCAPABILITIES ..................................................................... 60
Experience | Flexibility | Quality | Timely
DC SERIES
A, B, E, F, G, M, . . . etc
SPECIAL OPTIONS
CC ...... Conformal coated motor
GB ...... Enhanced conformal coating process
EM ...... IP57 Encapsulated motor
TTL ����� Tachometer or locked rotor output signal is 5VDC ±0.5
WS ..... Open collector alarm output signal
IMPELLER STYLE
S .........Standard
H .........High-pressure
G .........Enhanced airflow
OPTIONS
1 ......... Tachometer
2 ......... Locked rotor output
3 or 4 .. Thermistor speed control
5 ......... Dual speed
6 ......... PWM speed control
CONNECTION TYPE
Blank ... UL1007 or UL1061 lead wires
T .......... 0.110 x 0.020 Faston male terminals(Terminals available on selected models)
HOUSING STYLE
R ........ Ribbed style (25, 28, 30, 40, 50, 60, & 80mm)
F �������� Flanged style (60, 80, 92, 120, 127, 172mm)
B ........ Blower
ROHS COMPLIANT
FRAME SIZE
25 ..... 25mm30 ..... 30mm38 ..... 38mm40 ...... 40mm50 ..... 50mm, 51mm52 ..... 52mm60 ..... 60mm75 ...... 75mm80 ..... 80mm92 ..... 92mm
FRAME THICKNESS
06 .... 6.1mm 38 ..... 38mm 10 .... 10mm 51 ..... 51mm15 .... 15mm 60 ..... 60mm20 .... 20mm 65 ..... 65mm25 .... 25mm 72 ..... 72mm28 .... 28mm 80 ..... 80mm30 .... 30mm 89 ..... 89mm32 .... 32mm33 .... 33mm
AIR FLOW
S, L, M, H, E, X, U, V
VOLTAGE
05 ...... 5 VDC
12 ...... 12 VDC
24 ...... 24 VDC
48 ...... 48 VDC
BEARINGS
B ....... 2 Ball Bearing
C ....... 1 Ball & 1 Sleeve
D ....... Sleeve
F 60 25 E 12 B _ 1 - F H R - TTL
C o o l i n g S i m p l i f i e d
2
DC AXIAL FANS & BLOWERS
[ PART NUMBERING SYSTEM ]
97 ..... 97mm12 ...... 120mm13 ...... 127mm17 ...... 172x150mm18 ...... 180mm20 ..... 208mm22 ..... 222mm225 ... 225mm25 ..... 255mm280 ... 280mmTOC
3
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Model No.
Rated Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
MA2506L 5 3 - 6.5 50 6,500 0.03 1.22 1.25 0.05 11.0 8
MA2506M 5 3 - 6.5 60 8,500 0.05 1.65 2.30 0.09 19.0 8
MA2506H 5 3 - 6.5 70 10,500 0.06 2.08 3.37 0.13 25.5 8
Model No.
Rated Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
MA3010L 5 3 - 6.5 60 5,000 0.06 2.15 1.85 0.07 15 8
MA3010M 5 3 - 6.5 70 7,000 0.09 3.17 2.64 0.11 21 8
MA3010H 5 3 - 6.5 140 9,000 0.12 4.22 3.77 0.15 28 8
MA3010L 12 7 - 13.8 40 5,000 0.06 2.15 1.85 0.07 15 8
MA3010M 12 7 - 13.8 70 7,000 0.09 3.17 2.64 0.11 21 8
MA3010H 12 7 - 13.8 100 9,000 0.12 4.22 3.77 0.15 28 8
(25 x 25 x 6.1 mm)0.98 x 0.98 x 0.24 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 30, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output signal
(30 x 30 x 10 mm)1.18 x 1.18 x 0.39 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 30, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output signal
Airflow: air intake over struts
AIR FLOW (M3/MIN)
4.0
3.0
2.0
1.0
0 0.02 0.04
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.06 0.08
H
M
L
4.0
3.0
2.0
1.0
0 0.04 0.08
AIR FLOW (M3/MIN)
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.12 0.16
H
M
L
MA2506 series
MA3010 series
0.11 ± 0.01(Ø2.8 ±0.1)
0.98 ± 0.01(25 ±0.3)
0.79 ± 0.01(20.0 ±0.2)
0.24 ± 0.01(6.1 ±0.2)
0.39 ±0.01(10 ±0.3)
0.10 ±0.01(2.5 ±0.3)
0.12 ±0.01(3 ±0.1)
1.18 ±0.01(30 ±0.3)
0.95 ±0.01(24 ±0.2)
TOC
4
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Model No.Rated
Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
MA3828S 12 7 - 13.2 50 5,000 0.176 6.20 3.39 0.136 30.8 35
MA3828L 12 7 - 13.2 85 6,500 0.233 8.28 5.50 0.220 33.2 35
MA3828M 12 7 - 13.2 140 8,000 0.288 10.18 8.97 0.350 37.2 35
MA3828H 12 7 - 13.2 200 9,200 0.333 11.75 11.05 0.442 39.0 35
MA3828E 12 7 - 13.2 240 10,300 0.381 13.44 13.50 0.540 41.0 35
MA3828X 12 7 - 13.2 350 11,500 0.426 15.01 16.83 0.698 43.0 35
MA3828U 12 7 - 13.2 520 13,000 0.482 16.96 21.50 0.866 47.5 35
MA3828V 12 7 - 13.2 650 15,000 0.556 19.57 28.63 1.145 53.1 35
(38 x 38 x 28 mm)1.50 x 1.50 x 1.10 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
(40 x 40 x 10.3 mm)1.57 x 1.57 x 0.41 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1061 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal
AIR FLOW (M3/MIN)
20
15
10
5STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
30
0 0.10 0.20 0.30 0.40
25
0.50
E
M
H
L
S
0.60
U
V
X
MA3828 seriesHIGH PERFORMANCE
G4010 series
1.50 ±0.01(38 ±0.3)
1.26 ±0.01(32 ±0.2)
4x Ø 0.13 ±0.01(Ø 3.4 ±0.3)
1.10 ±0.01(28 ±0.2)0.12 ±0.01
(3 ±0.15)
12
8
4
0 0.1 0.2
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.3
10
6
2
0.4
S
E
H
M
L
AIR FLOW (M3/MIN)
1.26 ±0.01(32 ±0.3)
AIR FLOW
1.57 ±0.02(40 ±0.5) 0.41 ±0.02
(10.3 ±0.5)
4x Ø0.17 ±0.01(4x Ø4.25 ±0.3)
Model No.Rated
Voltage
V
Current mA Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G4010S 5/12 90 60 - 4,000 0.13 5.00 1.70 0.07 21 12
G4010L 5/12/24 140 100 70 5,000 0.16 6.00 2.70 0.11 22 12
G4010M 5/12/24 240 150 100 6,000 0.19 7.00 3.70 0.15 28 12
G4010H 5/12/24 400 220 160 8,000 0.25 9.00 6.40 0.25 35 12
G4010E 12/24 - 350 250 10,000 0.32 11.00 9.90 0.39 41 12
TOC
5
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(40 x 40 x 15 mm)1.57 x 1.57 x 0.59 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1061 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
(40 x 40 x 20 mm)1.57 x 1.57 x 0.79 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
12.0
8.0
6.0
2.0STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R 14.0
0 0.10 0.15 0.25 0.35
H
M
E
X
4.0
10.0
0.05 0.20 0.30
L
16.0
AIR FLOW (M3/MIN)
G4015 series
G4020 series
4.0
3.0
2.0
1.0STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
5.0
0 0.10 0.20 0.30 0.40
L
S
M
H
6.0
7.0
E
AIR FLOW (M3/MIN)
0.79 ±0.01(20 ±0.3)
0.16 (4.0)
1.57 ±0.02(40 ±0.5)
1.26 ±0.02(32 ±0.5)
4xØ 0.17 ±0.01(Ø4.2 ±0.3)
Model No.
Rated Voltage
V
Current mA Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G4020S 5/12 120 50 - 4,000 0.18 6.00 1.74 0.07 21 28
G4020L 5/12 160 70 - 5,000 0.22 8.00 2.66 0.11 23 28
G4020M 5/12/24 220 95 65 6,000 0.26 9.00 3.75 0.15 26 28
G4020H 5/12/24 300 130 80 7,000 0.31 11.00 4.98 0.20 29 28
G4020E 5/12/24 440 160 110 8,000 0.33 11.70 5.81 0.23 32 28
Model No.Rated
Voltage
V
Current mA Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G4015L 5/12/24 200 80 50 4,000 0.10 4.00 1.84 0.07 20 23
G4015M 5/12/24 300 130 70 6,000 0.16 6.00 4.08 0.16 23 23
G4015H 5/12/24 400 200 90 8,000 0.22 8.00 7.24 0.29 29 23
G4015E 12/24 - 270 110 10,000 0.28 10.00 11.02 0.43 35 23
G4015X 12/24 - 350 160 12,000 0.33 12.00 15.31 0.60 39 23
1.57 ±0.02(40 ±0.05)
1.26 ±0.02(32 ±0.5)
4x Ø 0.17 ±0.01 (Ø 4.4 ±0.3)
0.59 ±0.01(15 ±0.3)
TOC
6
DC A
XIAL FANS
7
DC A
XIAL FANS
Tel: 425 -222- 5900 Tel: 425 -222- 5900800-453-4569 800-453-4569www.mechatronics.com www.mechatronics.comE-mail: Sales@Mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 Fax: 425 -222- 5155
(40 x 40 x 28 mm)1.57 x 1.57 x 1.10 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
(50 x 50 x 10 mm)1.97 x 1.97 x 0.39 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: impedance
Options: tachometer output signal
20
15
10
5STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R 30
0 0.10 0.20 0.30 0.40
25
0.50
E
M
H
L
S
0.60 0.70
35
V
X
U
AIR FLOW (M3/MIN)
MD4028 seriesHIGH PERFORMANCE
M5010 series
1.57 ±0.01(40 ±0.2)
1.26 ±0.01(32 ±0.2)
4x Ø 0.13 ±0.01(Ø 3.4 ±0.15)
1.10 ±0.01(28 ±0.15)
0.12(3)
4.0
3.0
2.0
1.0
0 0.10 0.20
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.30 0.40
E
H
M
AIR FLOW (M3/MIN)
0.39 ±0.01(10.2 ±0.3)
1.97 ±0.01(50.0 ±0.3)
1.57 ±0.01(40.0 ±0.3) 4x Ø 0.17 ±0.01
(Ø 4.3 ±0.3)
(52 x 52 x 10 mm)2.04 x 2.04 x 0.39 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: impedance
Options: tachometer output signal
(50 x 50 x 15 mm)1.97 x 1.97 x 0.59 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1061 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
4.0
3.0
2.0
1.0
0 0.10 0.20
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.30 0.40
E
H
M
AIR FLOW (M3/MIN)
M5210 series
G5015 series6.0
5.0
3.0
1.0
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0 0.10 0.20 0.30 0.40
2.0
4.0 M
L
H
E
S
0.45
AIR FLOW (M3/MIN)
1.97 ±0.02(50 ±0.5)
1.57 ±0.02(40 ±0.4)
4x Ø 0.17 ±0.01 (Ø 4.2 ±0.3)
0.59 ±0.01(15 ±0.3)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G5015S 5/12/24 150 80 70 2,500 0.15 5.00 0.92 0.04 20 35
G5015L 5/12/24 220 130 100 3,500 0.22 8.00 1.94 0.08 22 35
G5015M 5/12/24 300 200 140 4,500 0.31 11.00 2.86 0.11 24 35
G5015H 5/12/24 400 280 180 5,500 0.37 13.00 4.29 0.17 29 35
G5015E 12/24 - 400 250 6,500 0.44 16.00 5.71 0.22 34 35
2.04 ±0.01(52.0 ±0.3)
1.65 ±0.01(42.0 ±0.3)
4x Ø 0.17 ±0.01(Ø 4.3 ±0.3)
0.39 ±0.01(10.2 ±0.3)
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight g12 24 M³/Min. CFM MM INCH
MD4028S 12/24 70 50 5,000 0.209 7.38 4.05 0.159 30.8 50
MD4028L 12/24 100 70 6,500 0.272 9.59 6.75 0.266 33.2 50
MD4028M 12/24 140 90 8,000 0.335 11.82 10.23 0.403 37.2 50
MD4028H 12/24 210 120 9,200 0.384 13.57 13.53 0.533 41.0 50
MD4028E 12/24 240 140 10,300 0.430 15.19 16.96 0.670 44.0 50
MD4028X 12/24 350 180 11,500 0.529 18.67 17.72 0.709 47.3 50
MD4028U 12 520 - 13,000 0.598 21.11 22.64 0.906 50.0 50
MD4028V 12 650 - 15,000 0.690 24.35 30.14 1.206 53.1 50
Model No.Rated
Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
M5010M 5 3-6.0 60 4,000 0.18 6.36 1.77 0.07 24 20
M5010H 5 3-6.0 80 5,000 0.23 8.12 2.63 0.11 26 20
M5010E 5 3-6.0 150 6,000 0.28 9.89 3.60 0.14 28 20
M5010M 12 7-13.8 60 4,000 0.18 6.36 1.77 0.07 24 20
M5010H 12 7-13.8 70 5,000 0.23 8.12 2.63 0.11 26 20
M5010E 12 7-13.8 120 6,000 0.28 9.89 3.60 0.14 28 20
Model No.
Rated Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
M5210M 5 3 - 6.0 80 4,000 0.22 7.77 2.40 0.10 24 20
M5210H 5 3 - 6.0 160 5,000 0.28 9.89 3.00 0.12 26 20
M5210M 12 7- 13.8 70 4,000 0.22 7.77 2.40 0.10 24 20
M5210H 12 7- 13.8 100 5,000 0.28 9.89 3.00 0.12 26 20
M5210E 12 7- 13.8 120 6,000 0.32 11.30 3.70 0.15 28 20
7
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(52 x 52 x 10 mm)2.04 x 2.04 x 0.39 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: impedance
Options: tachometer output signal
(50 x 50 x 15 mm)1.97 x 1.97 x 0.59 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1061 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
4.0
3.0
2.0
1.0
0 0.10 0.20
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.30 0.40
E
H
M
AIR FLOW (M3/MIN)
M5210 series
G5015 series6.0
5.0
3.0
1.0
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0 0.10 0.20 0.30 0.40
2.0
4.0 M
L
H
E
S
0.45
AIR FLOW (M3/MIN)
1.97 ±0.02(50 ±0.5)
1.57 ±0.02(40 ±0.4)
4x Ø 0.17 ±0.01 (Ø 4.2 ±0.3)
0.59 ±0.01(15 ±0.3)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G5015S 5/12/24 150 80 70 2,500 0.15 5.00 0.92 0.04 20 35
G5015L 5/12/24 220 130 100 3,500 0.22 8.00 1.94 0.08 22 35
G5015M 5/12/24 300 200 140 4,500 0.31 11.00 2.86 0.11 24 35
G5015H 5/12/24 400 280 180 5,500 0.37 13.00 4.29 0.17 29 35
G5015E 12/24 - 400 250 6,500 0.44 16.00 5.71 0.22 34 35
2.04 ±0.01(52.0 ±0.3)
1.65 ±0.01(42.0 ±0.3)
4x Ø 0.17 ±0.01(Ø 4.3 ±0.3)
0.39 ±0.01(10.2 ±0.3)
Model No.
Rated Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g M³/Min. CFM MM INCH
M5210M 5 3 - 6.0 80 4,000 0.22 7.77 2.40 0.10 24 20
M5210H 5 3 - 6.0 160 5,000 0.28 9.89 3.00 0.12 26 20
M5210M 12 7- 13.8 70 4,000 0.22 7.77 2.40 0.10 24 20
M5210H 12 7- 13.8 100 5,000 0.28 9.89 3.00 0.12 26 20
M5210E 12 7- 13.8 120 6,000 0.32 11.30 3.70 0.15 28 20
TOC
8
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(60 x 60 x 10 mm)2.36 x 2.36 x 0.39 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal
(60 x 60 x 15 mm)2.36 x 2.36 x 0.60 inches
Features: high static pressure impeller design
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
4.0
3.0
2.0
1.0
0 0.20 0.40
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.60 0.80
E
H
M
L
X
AIR FLOW (M3/MIN)
MB6010 seriesTHIN PROFILE
G6015-G series
0.39 ±0.01(10.2 ±0.3)
2.36 ±0.01(60.0 ±0.3)
1.97 ±0.01(50.0 ±0.3) 4x Ø 0.17 ±0.01
(Ø 4.3 ±0.3)
8.0
6.0
4.0
2.0
0 0.20 0.40
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.60 0.80
L
M
H
E
S
X
AIR FLOW (M3/MIN)
2.36 ±0.02(60 ±0.5)
1.97 ±0.02(50 ±0.5)
4x Ø 0.18 ±0.01 (Ø 4.5 ±0.3)
.60 ±0.01(15.3 ±0.3)
0.16(4)
Model No.Rated
Voltage V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise dbA
Weight g
M³/Min. CFM MM INCH
MB6010L 12 6 - 13.8 50 2,700 0.27 9.35 1.07 0.04 19.0 26
MB6010M 12 6 - 13.8 80 3,200 0.31 11.04 1.43 0.06 22.5 26
MB6010H 12 6 - 13.8 120 3,900 0.38 13.48 1.98 0.08 28.0 26
MB6010E 12 6 - 13.8 140 4,400 0.43 15.30 2.43 0.10 30.5 26
MB6010X 12 6 - 13.8 160 5,300 0.53 18.65 3.22 0.13 35.0 26
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G6015S-G 5/12 90 70 - 2,800 0.32 11.0 1.94 0.08 21 26
G6015L-G 5/12/24 130 90 65 3,400 0.39 14.0 2.96 0.12 25 26
G6015M-G 5/12/24 220 110 75 4,000 0.46 16.0 3.78 0.15 28 26
G6015H-G 5/12/24 280 130 95 4,600 0.54 19.0 5.00 0.20 30 26
G6015E-G 5/12/24 350 180 110 5,200 0.60 21.0 6.12 0.24 32 26
G6015X-G 12/24 - 230 130 5,800 0.68 24.0 7.45 0.29 35 26
TOC
9
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(60 x 60 x 20 mm)2.36 x 2.36 x 0.79 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
(60 x 60 x 25 mm)2.36 x 2.36 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged or ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor speed control; encapsulated motor; PWM speed control
6.0
4.0
3.0
1.0
0 0.20 0.40
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0.60 0.80
L
M
H
E
X
2.0
5.0
AIR FLOW (M3/MIN)
MD6020 series
F6025-H series.40
.35
.30
.25
.20
.10
.05
0 5 10 15 20 25 30
AIR FLOW - (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.15
S
L
M
H
E
X
4x Ø 0.18(Ø 4.5)
2.36 ±0.02(60 ±0.5)
1.97 ±0.01(50 ±0.3) 0.14
(3.5)
0.98 ±0.02(25 ±0.5)
Model No.
Rated Voltage
V
Current mA
Speed
RPM
Air Volume Max. Static Pressure (H20)
Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
F6025S-H 12/24 75 40 2,400 0.33 12 2.25 0.09 22 63
F6025L-H 12/24 85 45 3,000 0.39 14 3.50 0.14 25 63
F6025M-H 12/24 95 55 3,600 0.48 17 5.00 0.20 28 63
F6025H-H 12/24 140 80 4,200 0.57 20 6.50 0.26 32 63
F6025E-H 12/24 230 125 5,000 0.67 24 8.00 0.32 37 63
F6025X-H 12/24 330 170 5,800 0.79 28 9.25 0.37 42 63
2.36 ±0.01(60 ±0.3)
1.97 ±0.01(50 ±0.3)
8x Ø 0.17 ±0.01(Ø 4.3 ±0.3)
0.79 ±0.01(20.2 ±0.3)
0.16 ±0.01(4 ±0.3)
0.12 ±0.01(3 ±0.3)
Model No.Rated
Voltage
V
Operating Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
gM³/Min. CFM MM INCH
MD6020L 12 6 - 13.8 100 2,700 0.39 13.9 1.88 0.07 23.0 43
MD6020M 12 6 - 13.8 120 3,200 0.48 16.9 2.75 0.11 27.5 43
MD6020H 12 6 - 13.8 160 3,900 0.58 20.4 3.72 0.15 31.0 43
MD6020E 12 6 - 13.8 220 4,400 0.65 23.0 4.56 0.18 33.5 43
MD6020X 12 6 - 13.8 300 4,900 0.73 25.8 5.51 0.22 37.0 43
TOC
10
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(60 x 60 x 38 mm)2.36 x 2.36 x1.50 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor signal; PWM speed control
(60 x 60 x 38 mm)2.36 x 2.36 x 1.50 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
10.0
0 0.25 0.50 1.00 1.50 1.75
STA
TIC
PR
ESS
UR
E -
MM
OF
WAT
ER
15.0
1.250.75
L
M
H
E
X
U
S
5.0
20.0
25.0
30.0
35.0
40.0
AIR FLOW (M3/MIN)
ME6038 series
MQ6038 seriesHIGH PERFORMANCE
1.97 ±0.01(50.0 ±0.3)
2.36 ±0.01(60 ±0.3)
8x Ø 0.17 ±0.01(Ø 4.4 ±0.2)
0.19(5.0)
0.19(5.0)
1.50 ±0.01(38 ±0.3)
0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
0.8
1.2
1.6
2.0
2.4
0.4
L
M
H
E
Air Flow
Ro
tati
on
11.81 ±0.59(300.0 ±15)
2- 0.16 ±0.01(2- 4.0 ±0.3)
1.50 ±0.02(38.0 ±0.5)
1.97 ±0.01(50.0 ±0.3)
2.36 ±0.02(60.0 ±0.5)
8-
0.1
7 ±
0.0
1(8
- Ø
4.4
±0
.3)
Model No.Rated
Voltage
V
Operating Voltage
V
Current
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
gM³/Min. CFM MM INCH
ME6038S 12 7 - 13.2 0.38 5,000 0.838 29.58 9.23 0.36 44.6 104
ME6038L 12 7 - 13.2 0.50 6,000 1.006 35.51 13.31 0.52 48.5 104
ME6038M 12 7 - 13.2 0.67 7,000 1.177 41.55 18.10 0.71 53.2 104
ME6038H 12 7 - 13.2 0.86 8,000 1.342 47.38 23.68 0.93 58.0 104
ME6038E 12 7 - 13.2 1.20 8,800 1.525 53.85 27.70 1.09 60.0 104
ME6038X 12 7 - 13.2 1.40 9,400 1.629 57.52 31.60 1.24 63.0 104
ME6038U 12 7 - 13.2 1.80 10,000 1.733 61.19 35.30 1.41 65.0 104
Model No.Rated
Voltage V
Current mA Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight g
12 24 48 M³/Min. CFM MM INCH
MQ6038L 12/24/48 480 260 210 8,000 1.26 44.60 23.2 0.91 53 106
MQ6038M 12/24/48 650 360 260 9,000 1.45 51.30 29.1 1.15 57 106
MQ6038H 12/24/48 860 460 310 10,000 1.61 57.00 36.3 1.43 60 106
MQ6038E 12/24/48 1600 720 410 11,000 1.96 69.20 53.6 2.11 64 106
TOC
11
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(80 x 80 x 15 mm)3.15 x 3.15 x 0.59 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
(80 x 80 x 20 mm)3.15 x 3.15 x 0.79 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
.18
.12
.6
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.24
0 14 28 42 56
X
E
H
M
L
S
AIR FLOW (CFM)
G8015-G series
G8020 series5.0
3.0
1.0
0 0.2 0.6
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
1.0 1.40.4 0.8 1.2
M
L
H
E
S
2.0
4.0
6.0
AIR FLOW (M3/MIN)
0.82 ±0.01(20.8 ±0.3)
3.15 ±0.02(80 ±0.5)
2.82 ±0.02(71.5 ±0.5)
4x Ø 0.17 ±0.01 (Ø 4.4 ±0.3)
0.60 ±0.01(15.3 ±0.03)
0.16(4)
3.15 ±0.02(80 ±0.5)
2.82 ±0.02(71.5 ±0.5)
4x Ø 0.18 ±0.01 (Ø 4.5 ±0.3)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G8015S-G 5/12/24 200 100 80 2,800 0.73 26 2.24 0.09 28 58
G8015L-G 5/12/24 280 130 90 3,200 0.82 29 2.86 0.11 31 58
G8015M-G 5/12/24 380 180 120 3,600 0.92 32 3.47 0.14 34 58
G8015H-G 12/24 - 230 150 4,000 1.05 37 4.29 0.17 36 58
G8015E-G 12/24 - 320 180 4,400 1.13 40 5.00 0.20 38 58
G8015X-G 12/24 - 350 250 4,800 1.23 43 5.92 0.23 40 58
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G8020S 5/12/24 200 70 60 2,000 0.69 24 1.53 0.06 22 84
G8020L 5/12/24 300 110 75 2,500 0.88 31 2.45 0.10 25 84
G8020M 5/12/24 400 160 90 3,000 1.07 38 3.37 0.13 29 84
G8020H 12/24 - 230 140 3,500 1.23 43 4.29 0.17 33 84
G8020E 12/24 - 330 200 4,000 1.39 49 5.20 0.20 37 84
TOC
12
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(80 x 80 x 25 mm)3.15 x 3.15 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 24, UL1007 lead wires
Frame: flanged or ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor speed control; encapsulated motor; PWM speed control
(80 x 80 x 32 mm)3.15 x 3.15 x 1.26 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, 1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
.30
.25
.20
.10
.05
0 10 20 30 40 50 60
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.15S
L
M
H
E
X
F8025-H series
G8032 series
0.16
4x Ø 0.18(Ø 4.5)
3.15 ±0.02(80 ±0.5)
2.82 ±0.01(71.5 ±0.3) 0.16
(4) (4)
0.98 ±0.02(25 ±0.5)
12
8
6
0 0.2 0.8
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
1.2 1.6
S
M
H
E
L
0.4 0.6 1.0 1.4
10
4
2
AIR FLOW (M3/MIN)
3.15 ±0.02(80 ±0.5)
2.81 ±0.02(71.5 ±0.5)
4x Ø 0.17 ±0.01 (Ø 4.4 ±0.3)
1.26 ±0.02(32 ±0.5)
0.16(4)
0.16(4)
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
F8025S-H 12/24 75 50 2,000 0.73 26 1.75 0.07 22 82
F8025L-H 12/24 90 60 2,400 0.87 31 2.50 0.10 26 82
F8025M-H 12/24 120 80 2,800 0.99 35 3.00 0.12 29 82
F8025H-H 12/24 145 90 3,200 1.13 40 4.25 0.17 32 82
F8025E-H 12/24 240 140 3,600 1.30 46 5.25 0.21 35 82
F8025X-H 12/24 480 260 4,200 1.50 53 6.50 0.26 39 82
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
G8032S 12/24 140 100 2,500 0.82 29 3.70 0.15 30 129
G8032L 12/24 200 150 3,000 0.97 34 5.10 0.20 34 129
G8032M 12/24 260 200 3,500 1.17 41 7.30 0.29 38 129
G8032H 12/24 450 250 4,000 1.35 48 9.30 0.37 42 129
G8032E 12/24 550 330 4,500 1.47 52 11.30 0.44 46 129
TOC
12
DC A
XIAL FANS
13
DC A
XIAL FANS
Tel: 425 -222- 5900 Tel: 425 -222- 5900800-453-4569 800-453-4569www.mechatronics.com www.mechatronics.comE-mail: Sales@Mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 Fax: 425 -222- 5155
(80 x 80 x 25 mm)3.15 x 3.15 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 24, UL1007 lead wires
Frame: flanged or ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor speed control; encapsulated motor; PWM speed control
(80 x 80 x 32 mm)3.15 x 3.15 x 1.26 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, 1007 lead wires
Frame: ribbed
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
.30
.25
.20
.10
.05
0 10 20 30 40 50 60
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.15S
L
M
H
E
X
F8025-H series
G8032 series
0.16
4x Ø 0.18(Ø 4.5)
3.15 ±0.02(80 ±0.5)
2.82 ±0.01(71.5 ±0.3) 0.16
(4) (4)
0.98 ±0.02(25 ±0.5)
12
8
6
0 0.2 0.8
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
1.2 1.6
S
M
H
E
L
0.4 0.6 1.0 1.4
10
4
2
AIR FLOW (M3/MIN)
3.15 ±0.02(80 ±0.5)
2.81 ±0.02(71.5 ±0.5)
4x Ø 0.17 ±0.01 (Ø 4.4 ±0.3)
1.26 ±0.02(32 ±0.5)
0.16(4)
0.16(4)
(80 x 80 x 38 mm)3.15 x 3.15 x 1.50 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
(80 x 80 x 38 mm)3.15 x 3.15 x 1.50 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
20
15
10
5STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
25
30
0.500 1.00 1.50 2.00 2.50 3.00
M
L
H
E
ML
HE
XU
AIR FLOW (M3/MIN)
MC8038 series
MQ8038 seriesHIGH PERFORMANCE
0 20.0 40.0 60.0 80.0 100.0 120.0 140.0
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
0.8
1.2
1.6
2.0
2.4
0.4
L
M
H
E
Air Flow
Ro
tati
on
2- 0.16 ±0.01(2- 4.0 ±0.3)
11.81 ±0.59(300.0 ±15) 1.50 ±0.02
(38.0 ±0.5)
2.81 ±0.01(71.5 ±0.3)
3.15 ±0.02(80.0 ±0.5)
8- 0
.17
±0.
01(8
- Ø
4.4
±0.
3)
3.15 ±0.01(80 ±0.3)
2.82 ±0.01(71.5±0.3)
1.50 ±0.01(38 ±0.2)
0.12(3)
0.12(3)
4x Ø 0.17 ±0.01(Ø 4.4 ±0.2)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MC8038L 12/24/48 240 140 90 3,400 1.28 45.3 7.23 0.28 39.0 180
MC8038M 12/24/48 370 230 140 4,200 1.63 57.5 10.30 0.41 44.5 180
MC8038H 12/24/48 610 330 190 5,000 1.98 69.9 15.62 0.61 48.2 180
MC8038E 12/24/48 930 450 280 5,800 2.31 81.6 21.38 0.84 52.1 180
MC8038X 12/24 1200 600 - 6,300 2.51 86.6 25.22 0.99 56.4 180
MC8038U 12/24 1500 890 - 6,800 2.71 95.6 29.38 1.15 60.2 180
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MQ8038L 12/24/48 450 250 180 4,500 1.74 61.50 12.4 0.49 49 180
MQ8038M 12/24/48 850 450 280 6,000 2.36 83.40 21.8 0.86 57 180
MQ8038H 12/24/48 1550 780 450 7,500 2.98 105.20 34.8 1.37 63 180
MQ8038E 12/24/48 2800 1400 750 9,000 3.49 123.30 50.0 1.97 67 180
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
F8025S-H 12/24 75 50 2,000 0.73 26 1.75 0.07 22 82
F8025L-H 12/24 90 60 2,400 0.87 31 2.50 0.10 26 82
F8025M-H 12/24 120 80 2,800 0.99 35 3.00 0.12 29 82
F8025H-H 12/24 145 90 3,200 1.13 40 4.25 0.17 32 82
F8025E-H 12/24 240 140 3,600 1.30 46 5.25 0.21 35 82
F8025X-H 12/24 480 260 4,200 1.50 53 6.50 0.26 39 82
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
G8032S 12/24 140 100 2,500 0.82 29 3.70 0.15 30 129
G8032L 12/24 200 150 3,000 0.97 34 5.10 0.20 34 129
G8032M 12/24 260 200 3,500 1.17 41 7.30 0.29 38 129
G8032H 12/24 450 250 4,000 1.35 48 9.30 0.37 42 129
G8032E 12/24 550 330 4,500 1.47 52 11.30 0.44 46 129
14
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(92 x 92 x 25 mm)3.62 x 3.62 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, 1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
E9225 seriesHIGH PERFORMANCE .32
.28
.24
.20
.16
.12
.08
.04
0 10 20 30 40 50 60
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
S
L
M
H
E
X
3.62 ±0.02(92 ±0.5)
3.25 ±0.01(82.5 ±0.3) 0.16
(4) (4)0.16
0.98 ±0.02(25 ±0.5)
4x Ø 0.18(Ø 4.5)
(92 x 92 x 25 mm)3.62 x 3.62 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
6.0
5.0
3.0
1.0
0 0.2 1.0
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
2.0
L
M
H
E
S
X
0.4 0.6 0.8 1.2 1.4 1.6 1.8
2.0
4.0
AIR FLOW (M3/MIN)
G9225-G seriesLOW NOISE 3.62 ±0.02
(92.0 ±0.5)
3.25 ±0.02(82.5 ±0.5)
4x Ø 0.17 (Ø 4.4)
0.98 ±0.02(25 ±0.5)
0.12(3)
0.16(4)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G9225S-G 5/12/24 220 90 60 1,200 0.67 24 0.70 0.03 19 86
G9225L-G 5/12/24 340 140 90 1,600 0.89 31 1.20 0.05 21 86
G9225M-G 5/12/24 480 200 120 2,000 1.13 40 1.80 0.07 23 86
G9225H-G 12/24 - 280 160 2,400 1.35 48 2.50 0.10 26 86
G9225E-G 12/24 - 370 200 2,800 1.61 57 3.40 0.13 30 86
G9225X-G 12/24 - 490 290 3,200 1.87 66 4.38 0.17 34 86
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 48 M³/Min. CFM MM INCH
E9225S 5/12/24 270 98 60 - 2,000 0.82 29 2.25 0.09 24 111
E9225L 5/12/24 400 150 85 - 2,400 0.99 35 3.25 0.13 27 111
E9225M 5/12/24 560 235 125 - 2,800 1.24 44 4.75 0.19 32 111
E9225H 12/24/48 - 360 168 65 3,200 1.44 51 6.00 0.24 36 111
E9225E 12/24/48 - 498 255 85 3,600 1.58 56 7.00 0.28 39 111
E9225X 12/24/48 - 550 300 130 4,000 1.70 60 8.00 0.32 43 111
TOC
15
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(92 x 92 x 32 mm)3.62 x 3.62 x 1.24 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor speed control; encapsulated motor; PWM speed control
G9232 series.35
.25
.20
.10
.05
0 20 40 60 80 100
AIR FLOW (CFM)
.15
.30
SL
M
HE
X
STA
TIC
PR
ESS
UR
E -
IN. O
F W
ATER
1.24 ±0.02(32 ±0.5)
0.16(4) (4)
0.16
3.62 ±0.02(92 ±0.5)
3.25 ±0.02(82.5 ±0.5)
4x Ø 0.18 ±0.01(Ø 4.5 ±0.3)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G9232S 5/12/24 330 100 60 2,000 0.94 33 2.55 0.10 23 152
G9232L 5/12/24 480 170 90 2,400 1.13 40 3.47 0.14 28 152
G9232M 12/24 - 270 140 2,800 1.35 48 4.59 0.18 32 152
G9232H 12/24 - 360 200 3,200 1.56 55 6.02 0.24 35 152
G9232E 12/24 - 520 270 3,600 1.71 60 7.14 0.28 38 152
G9232X 12/24 - 680 360 4,000 1.92 68 8.25 0.33 44 152
(92 x 92 x 38 mm)3.62 x 3.62 x 1.5 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
12.0
9.0
6.0
3.0
18.0
0 0.6 1.2 1.8 2.4
15.0
3.6
E
M
H
L
3.0
21.0
X
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
AIR FLOW (M3/MIN)
MD9238 seriesHIGH PERFORMANCE
3.62 ±0.01(92 ±0.3)
3.25 ±0.01(82.5 ±0.2)
0.18(4.5)
4x Ø 0.17 ±0.01(Ø 4.4 ±0.2)
0.18(4.5)
1.50 ±0.01(38 ±0.2)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MD9238L 12/24/48 360 190 100 3,200 2.01 71.06 7.86 0.31 44.5 180
MD9238M 12/24/48 580 300 150 3,800 2.46 86.85 10.24 0.40 50.0 180
MD9238H 12/24/48 880 450 220 4,400 2.85 100.69 15.30 0.60 53.5 180
MD9238E 12/24 1000 500 - 4,800 3.13 110.56 16.93 0.67 55.0 180
MD9238X 24 - 700 - 5,400 3.50 123.57 21.39 0.84 58.4 180
TOC
16
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(120 x 120 x 25 mm)4.72 x 4.72 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: terminal or AWG24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor control; PWM speed control
E1225 series.32
.28
.24
.20
.16
.12
.08
.04
0 20 40 60 80 100 120
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
S
L
M
H
E
4x Ø 0.18(Ø 4.5)
4.72 ±0.02(120 ±0.5)
4.13 ±0.01(105 ±0.3)
0.19(5) (5)
0.19
0.98 ±0.02(25 ±0.5)
(120 x120 x 25 mm)4.72 x4.72 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; thermistor control; encapsulated motor; PWM speed control
.30
.25
.20
.10
.05
0 20 40 60 80 120
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.15
100
S
L
M
H
E
AIR FLOW (CFM)
G1225 seriesLOW NOISE
0.2(5) (5)
0.2
0.98 ±0.02(25 ±0.5)
4.72 ±0.02(120 ±0.5)
4.13 ±0.02(105 ±0.5)
4 x Ø 0.18 ±0.01(Ø 4.5 ±0.3)
Model No.Rated
Voltage V
Current mA Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 M³/Min. CFM MM INCH
G1225S 5/12/24 400 130 70 1,500 1.52 54 1.90 0.07 26 197
G1225L 5/12/24 620 230 120 1,800 1.87 66 2.60 0.10 29 197
G1225M 12/24 - 350 190 2,100 2.20 78 3.70 0.15 33 197
G1225H 12/24 - 480 270 2,400 2.46 87 4.50 0.18 38 197
G1225E 12/24 - 720 380 2,700 2.79 99 5.50 0.22 42 197
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g5 12 24 48 M³/Min. CFM MM INCH
E1225S 5/12/24 220 100 85 - 1,400 1.24 44 2.25 0.09 28 197
E1225L 5/12/24 340 142 95 - 1,800 1.55 55 3.00 0.12 32 197
E1225M 5/12/24/48 600 245 160 80 2,200 1.89 67 4.50 0.18 36 197
E1225H 12/24/48 - 385 240 120 2,600 2.32 82 6.00 0.24 40 197
E1225E 12/24/48 - 580 340 170 3,000 2.63 93 7.00 0.28 44 197
TOC
17
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(120 x 120 x 38 mm)4.69 x 4.69 x 1.5 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; encapsulated motor; PWM speed control
G1238 series16
12
8
4
0 1.0 2.0
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
3.0 5.0
S
L
M
H
E14
10
6
2
4.0
AIR FLOW (M3/MIN)
4.68 ±0.02(119 ±0.5)
4.13 ±0.02(105 ±0.5)
4x Ø 0.18 ±0.01 (Ø 4.5 ±0.3)
1.50 ±0.02(38 ±0.5)
0.2(5)
0.2(5)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
G1238S 12/24/48 250 180 80 2,000 2.50 88 4.39 0.17 34 336
G1238L 12/24/48 400 250 130 2,400 3.03 107 6.22 0.24 38 336
G1238M 12/24/48 600 330 180 2,800 3.54 125 8.16 0.32 43 336
G1238H 12/24/48 750 450 250 3,200 3.99 141 10.31 0.41 46 336
G1238E 12/24/48 1200 600 330 3,600 4.46 158 12.45 0.49 49 336
(120 x 120 x 38 mm)4.72 x 4.72 x 1.5 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
20.0
15.0
10.0
5.0
0 1.5
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
3.0 7.5
25.0
4.5 6.0
L
M
H
E
X
AIR FLOW (M3/MIN)
MD1238 series1.50 ±0.01(38 ±0.2)
4.72 ±0.01(120 ±0.3)
4.13 ±0.01(105 ±0.3)
0.18(4.5)
4x Ø 0.17 ±0.01(Ø 4.4 ±0.3)
0.18(4.5)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MD1238L 12/24 850 480 - 3,000 3.90 137 10.4 0.42 52.0 411
MD1238M 12/24 1200 660 - 3,400 4.42 155 13.4 0.54 54.5 411
MD1238H 12/24 1600 800 - 3,800 4.92 174 16.7 0.67 57.8 411
MD1238E 12/24/48 2100 1100 460 4,200 5.43 192 20.4 0.82 59.0 411
MD1238X 12/24/48 2500 1300 850 4,500 5.82 205 23.4 0.94 62.0 411
TOC
18
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(120 x 120 x 38 mm)4.72 x 4.72 x 1.5 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 22, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
MQ1238 seriesHIGH PRESSURE
0 50.0 100.0 150.0 200.0 250.0 300.0
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
0.6
1.0
0.8
1.4
1.2
1.6
1.8
2.0
0.4
0.2
L
M
H
Air FlowR
ota
tio
n
11.81 ±0.59(300.0 ±15)
2- 0.20 ±0.01(2- 5.0 ±0.3)
1.50 ±0.02(38.0 ±0.5)
8-
0.1
7 ±
0.0
1(8
- Ø
4.5
±0
.3)
4.13 ±0.01(105 ±0.3)4.72 ±0.02(120.0 ±0.5)
(127 x127 x 38 mm)5 x 5 x 1.5 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
16
12
8
4
0 1.0 2.0
M
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
3.0 5.0
14
10
6
2
4.0
S
L
M
H
AIR FLOW (M3/MIN)
G1338 series5.0 ±0.02(127 ±0.5)
4.46 ±0.02(113.3 ±0.5)
4x Ø 0.18 ±0.01 (Ø 4.5 ±0.3)
1.50 ±0.02(38 ±0.5)
0.20(5)
0.20(5)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
G1338S 12/24/48 350 220 130 2,000 2.46 87 6.22 0.24 37 355
G1338L 12/24/48 550 330 180 2,400 3.00 106 8.77 0.35 42 355
G1338M 12/24/48 850 480 250 2,800 3.46 122 11.73 0.46 46 355
G1338H 12/24/48 1200 650 330 3,200 3.99 141 15.10 0.59 49 355
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MQ1238L 12/24/48 1500 600 380 3,000 3.95 139.80 11.9 0.47 52 350
MQ1238M 12/24/48 2000 1100 600 4,000 5.34 188.60 21.6 0.85 59 350
MQ1238H 12/24/48 3600 1700 1000 5,000 6.40 226.00 34.4 1.35 65 350
TOC
19
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(172 x 150 x 50.8 mm)6.77 x 5.91 x 2.0 inches
Features: soft start function
Construction: die-cast aluminum frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Connection: AWG 22, UL1007 lead wires
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
MA1751 series
L
M
H
E
X
U
30
25
20
15
10
5
0 2.00 4.00 6.00 8.00 10.00
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
AIR FLOW (M3/MIN)
2.0 ±0.01(50.8 ±0.3)
.29(7.5)
.29(7.5)
.39(10)
6.77 ±0.02(172 ±0.5)
6.38 ±0.01(162 ±0.3)
5.91 ±0.02(150 ±0.5)
3x Ø 0.17 ±0.01(4.3 ±0.3)
(55.5º)
(55.5º)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MA1751L 12/24/48 1100 480 250 2,400 5.81 205.1 9.83 0.39 54.5 760
MA1751M 12/24/48 1400 570 310 2,600 6.29 222.2 11.54 0.46 56.6 760
MA1751H 12/24/48 1800 770 380 2,850 6.89 243.6 13.86 0.55 58.4 760
MA1751E 12/24/48 2200 980 550 3,150 7.62 269.2 16.93 0.67 61.0 760
MA1751X 24/48 - 1200 730 3,400 8.23 290.6 19.73 0.78 63.0 760
MA1751U 48 - - 900 3,800 9.20 324.8 24.64 0.98 66.2 760
(180 x 180 x 65 mm)7.09 x 7.09 x 2.56 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal or AWG 18 lead wire
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 300
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
100 200 400 500 600
H
M
MM1865 series7.09±0.02(180±0.5)
2.56±0.02(65±0.5)
0.25±0.01(6.5±0.3)
8-M5
M4
6.70(Ø170)
Terminal
6.02±0.02(153±0.5)
ROTATION
AIR FLOW
0.12(3)
0.02(0.5)
0.28(7)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM1865M 24/48 2100 1000 3,200 13 465 25.40 0.96 59 1.55
MM1865H 24/48 3900 1700 4,000 16 580 30.48 1.2 65 1.55
TOC
20
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(208 x 208x 72 mm)8.19 x 8.19 x 2.83 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal or AWG 18 lead wire
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
MM2072 series
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
150 300 450 600 750 900
H
(222 dia. x 60 mm)8.74 dia. x 2.36 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal or AWG 18 lead wire
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
400
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
CH
OF
WA
TER
150 300 600 750 900
H
MM2260 series
6.85±0.02(174.0±0.5)
8.19±0.02(208.0±0.5)
ø8xM5
2.83±0.02(72.0±0.5)
0.27±0.01(7.0±0.3)
Terminal0.12(3)
0.02(0.5)
0.28(7)
ø8.35±0.02
(ø212.0±0.5)
ø8.74±0.02
(ø222.0±0.5)
ø7.55±0.02(ø191.7±0.5)
M5 x 12
2.36±0.02(60.0 ±0.5)0.16±0.02(4.0 ±0.5)
Terminal
0.12(3)
0.02(0.5)
0.28(7)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM2072H 24/48 5000 2800 3,600 23 825 30.48 1.2 65 1.55
Model No.Rated
Voltage V
Current mA Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM2260H 24/48 3000 1700 4,000 19 690 38.10 1.5 67 1.4
TOC
21
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(222 dia. x 80 mm)8.74 dia. x 3.15 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal or AWG 18 lead wire
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
MM2280 series
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 400
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
150 300 600 750 900
H
0.20±0.01(5.0±0.3)
3.15±0.02(80.0±0.5)ø8.74±0.02
(ø222.0±0.5)
ø8.35±0.02(ø212.0±0.5)
ø0.18x12(ø4.5x12)
Terminal
0.12(3)
0.02(0.5)
0.28(7)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM2280H 24/48 2500 1400 3,000 18 625 24.64 0.97 60 1.55
(255 dia. x 89 mm)10.04 dia. x 3.50 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal or AWG 18 lead wire
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 600
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
200 400 800 1000 1200
H
MM2589 seriesø10.04±0.02(ø255±0.5)
ø9.68±0.02(ø246±0.5)
ø0.18x16(ø4.5x16) 0.20±0.01
(3.0 ±0.3)
3.50±0.02(89.0 ±0.5)
0.12(3)
0.02(0.5)
Terminal
0.28(7)
ø8.65(ø219.6)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM2589H 24/48 5200 2700 3,000 29 1030 27.94 1.1 60 1.60
TOC
22
DC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(225 x 225 x 80 mm)8.86 x 8.86 x 3.15 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
MM22580H series
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 400
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
150 300 600 750 900
H
8.86±0.02(225±0.5)
9.45(240)
0.12(3)
0.30(7.5)
AIR
RO
TATA
TIO
N
3.15±0.01(80±0.3)
ø10.24(ø260)
M5*4PCS
(280 dia. x 80 mm)11.02 dia. x 3.15 inches
Construction: magnesium alloy impeller & frame
Bearing option: ball bearing
Connection: terminal
Frame: flanged
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 600
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
200 400 800 1000 1200
H
MM28080H series
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0 600
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
200 400 800 1000 1200
H
11.02 ±0.02(280.0±0.50)
3.15 ±0.02(80.0 ±0.50)
0.11 ±0.022.5±0.50
4.86
±0.
02(1
23.5
±0.
50)
8-M5
90°
0.63 ±0.02(16-ø5.0)
12.60(ø320.0)11.61
(ø295.0)
AIR
RO
TATATION
11.48(ø291.7)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM22580H 24/48 4200 2100 3,600 21 755 35.56 1.4 65 1.60
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg24 48 M³/Min. CFM MM INCH
MM28080H 24/48 5200 2600 3,000 32 1130 25.40 1.0 65 1.60
TOC
23
DC BLOW
ERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(51 x 51 x 15 mm)2.01 x 2.01 x .62 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 26, UL1061 lead wires
Protection: thermal
Options: tachometer output signal
B5015 series
20
16
12
4
0 0.06
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
8
0.02 0.04 0.08 0.10 0.12 0.14
24
M
H
E
AIR FLOW (M3/MIN)
0.62 ±0.01(15.7 ±0.3)
0.47±0.01(12 ±0.3)
0.69(17.6)
4x R0.79(2)
1.00 ±0.01(25.5 ±0.3)
1.00 ±0.01(25.4 ±0.03)
2.10 ±0.02(51 ±0.5)
0.71 ±0.01(18 ±0.3)
0.93 ±0.01(23.5 ±0.3)
2.01±0.02(51 ±0.5)
0.91 ±0.01(23 ±0.3)
0.79 ±0.01(20 ±0.3)
0.79 ±0.01(20 ±0.3)
0.30(7.5) 1.08 ±0.01
(27.5 ±0.3)
2x R0.136(3.45)
2x R0.09 ±0.01(2.25 ±0.3)
Model No.Rated
Voltage V
Current mA Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
db
Weight
g5 12 24 M³/Min. CFM MM INCH
B5015M 5/12/24 280 130 90 4,500 0.09 3 8.98 0.35 35 25
B5015H 5/12/24 400 200 130 5,500 0.11 4 14.28 0.56 40 25
B5015E 12/24 – 300 180 6,500 0.13 5 22.45 0.88 45 25
(60 x 60 x 25 mm)2.36 x 2.36 x 0.98 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or fluid dynamic bearing
Connection: lead wires
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0 0.05 0.10 0.15 0.20 0.25
AIR FLOW (M³/MIN)
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
3.0
4.5
6.0
7.5
9.0
1.5
L
B6025 series2.36 ±0.02(60 ±0.4)
2.36
±0.
02(6
0 ±
0.4)
0.98±0.01(25 ±0.3)
0.02 (0.6)
0.02 (0.6)
Model No.Rated
Voltage V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise dbA
Weight
g M³/Min. CFM MM INCH
B6025L 12 240 4,000 0.24 8.47 8.30 0.32 40 44
TOC
24
DC BLOW
ERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(76 x 76 x 30 mm)2.98 x 2.98 x 1.18 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing or sleeve
Connection: lead wires
Protection: thermal
Options: tachometer output or locked rotor alarm signal
B7530 series
0 2.0 4.0 6.0 8.0 10.0 12.0 14.0
AIR FLOW (M³/MIN)
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
2.0
L
S
M
H
E
0.85 ±0.01(21.5 ±0.3)
1.47 ±0.01(37.7 ±0.3)
1.15 ±0.01(23.9 ±0.3)
2.908 ±0.02(75.7 ±0.5)
1.18 ±0.02(30.0 ±0.5)
1.2
2 ±
0.0
1(3
1.0
±0.3
)1.5
7 ±
0.0
2(4
0.0
±0.3
)
2.9
8 ±
0.0
2(7
5.7
±0.5
)
1.4
3 ±
0.0
1(3
6.4
±0.3
)
0.17 ±0.01(2-ø4.4 ±0.3)
(97 x 94.4 x 33 mm)3.82 x 3.72 x 1.30 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Protection: thermal
Options: tachometer output signal
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
0 5.0 10.0 15.0 20.0 25.0 30.0
L
M
H
5.0
10.0
15.0
20.0
25.0
30.0
MXB9733 series3.82 ±0.01(97 ±0.5)
1.97 ±0.01(50 ±0.3)
1.54 ±0.01(39 ±0.3)
3.72
±0.
01(9
4.4
±0.
5)
2.03
±0.
01(5
1.6
±0.
3)1.
26 ±
0.01
(32
±0.3
)
2- Ø 0.17(2- Ø 4.4 ±0.3)
1.26 ±0.01(32 ±0.3)
Ø 2.42 ±0.01
(Ø61.5 ±0.3)
Ø 1.79 ±0.01(Ø 45.4 ±0.3)
1.54
±0.
01(3
9 ±
0.3)
2.28
±0.
01(5
7.9
±0.5
)
1.30 ±0.01(33 ±0.5)
Model No.Rated
Voltage
V
Current mASpeed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 48 M³/Min. CFM MM INCH
MXB9733L 12/24/48 300 200 150 2,200 0.53 18.80 9.40 0.37 41 180
MXB9733M 12/24/48 500 350 200 2,800 0.68 24.00 17.80 0.70 51 180
MXB9733H 12/24/48 800 550 300 3,300 0.81 28.50 26.80 1.06 55 180
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
B7530S 12/24 130 90 2,000 0.20 6.9 3.9 0.16 28 87
B7530L 12/24 180 120 2,500 0.24 8.6 6.4 0.26 36 87
B7530M 12/24 270 180 3,000 0.30 10.6 9.4 0.38 38 87
B7530H 12/24 450 240 3,500 0.35 12.3 13.1 0.52 43 87
B7530E 12/24 500 300 3,800 0.38 13.5 17.7 0.71 45 87
TOC
25
DC BLOW
ERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(120 x 120 x 32 mm)4.7 x 4.7 x 1.24 inches
Construction: UL94V-0 PBT impeller & frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Protection: thermal
Options: tachometer output or locked rotor alarm signal; PWM speed control
B1232 series.80
.60
.50
.40
.20
.10
0 5 10 15 20 25 30
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.30
.70
35
L
M
H
(120 1.97 ±0.01 2.44 ±0.01
4.72 ±0.02 ±0.5)
(50 ±0.1) (62 ±0.2)
3.13 ±0.02(79.5 ±0.5)
3x(Ø 4.5 ±0.3)
2x (Ø 4.5)
1.26 ±0.02(32 ±0.5)
0.24(6)1.10
(28)
2.20
±0.
02(5
6 ±
0.5)
4.72
±0.
02(1
20 ±
0.5)
4.13
±0.
02(1
05 ±
0.5)
1.97 ±0.004(50 ±0.1)
3.98 ±0.02(101 ±0.5)
2.40
±0.
004
(61
±0.
1)
2.66
±0.
02(6
7.5
±0.
5)
Model No.Rated
Voltage
V
Current mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
g12 24 M³/Min. CFM MM INCH
B1232L 12/24 360 180 2,100 0.59 21 8.37 0.33 42 320
B1232M 12/24 550 330 2,400 0.67 24 11.53 0.45 46 320
B1232H 12/24 800 480 2,800 0.80 28 17.24 0.68 49 320
(125 x 125 x 33.5 mm)4.92 x 4.92 x 1.32 inches
Construction: UL94V-0 PBT impeller; metal and PBT frame
Bearing option: ball bearing
Connection: AWG 24, UL1007 lead wires
Protection: thermal
Options: tachometer output or locked rotor alarm signal
0 0.2 0.4 0.6 0.8 1.0 1.2
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
3
6
9
12
15
18
H
M
AIR FLOW (M³/MIN)
B1232-SR series
4.13 ±0.02(104.8 ±0.05)
1.20 ±0.02(30.5 ±0.5)
1.32(33.5)
4.92
±0.
02(1
25 ±
0.5)
4.13
±0.
02(1
04.8
±0.
5)
3.13
±0.
02(7
9.5
±0.
5)
2.40
±0.
02(6
1 ±
0.5)
2.48
(63)
1.98(50.4)3-R0.22
(3-R5.5)
4.92 ±0.02(125 ±0.5)
3-ø0.18 ±0.01(3-ø4.5 ±0.3)
TOC
Model No.Rated
Voltage
V
Current
mA
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
gM³/Min. CFM MM INCH
B1232M-SR 24 330 2,000 0.91 32 11.80 0.46 47 340
B1232H-SR 24 480 2,400 1.10 39 18.00 0.70 53 340
B1232M-SR 48 250 2,000 0.91 32 11.80 0.46 47 340
B1232H-SR 48 330 2,400 1.10 39 18.00 0.70 53 340
26
DC EN
GINEERIN
G
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
FAN OPTIONS
Tachometer Output Signal* 4 Pole Motor: 2 pulses/revolution, square waveform8 Pole Motor: 4 pulses/revolution, square waveform
Locked Rotor Output Signal* Low voltage output changes to high voltage output in locked/stopped rotor condition
Thermistor Control Hub-mount or remote mount thermistor monitors temperature and increases/decreases RPM as required
Conformal Coating Humidity resistant protective coating applied to PC board and electronic components. Enhanced “GB” option for additional protection also available.
Encapsulated Motor IP57 encapsulated motor and PCB
PWM Speed Control This option allows for various speed adjustment of the fan via a customer supplied PWM signal into the fan through a separate input wire. The PWM frequency should be 25kHz +/- 5kHz, and the voltage should be 0.5vdc ~ 5vdc.
Custom Designs Contact Mechatronics for details
Added Value Assembly Contact Mechatronics for details. See page 60
GENERAL SPECIFICATIONS*Brushless DC Fans & BlowersRated Voltage 5, 12, 24, 48 VDC
Operating Voltage Range DC 4.5 to 6.0V for DC 5V
DC 5.5 to 14V for DC 12V
DC 10 to 28V for DC 24V
DC 24 to 56V for DC 48V
Operating Temp Range –10°C to 70°C
Storage Temp Range –40°C to 70°C
Insulating Resistance Over 10M at DC 500V
Dielectric Strength AC 500V for 1 minute
Protection Reverse polarity protection
Impeller PBT (UL94V-0)
Housing PBT (UL94V-0)
PCB Epoxy (UL94V-0)
Lead Wire Color coded UL1007 or UL1061
Bearings Abec 3, double shielded, chrome ball bearings
Sintered bronze sleeve bearings
Safety UL, C-UL File E137077; TUV
Airflow Air exhaust over struts unless otherwise specified
Life Expectancy (L10) 60,000hrs @ 40° C
Engineering
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
*Actual specifications, tolerances and safety agency approvals vary by series. Consult Mechatronics for individual specifications.
TOC
26
DC EN
GINEERIN
G
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC SERIES
UF, UX, UC, . . . : Standard Model
FRAME SIZE
60 ............. 60mm80 ............. 80mm92 ............ 92mm12 ............. 120mm13 ............. 127mm16 ............. 160mm15 ............. 172x150mm17 ............. 172mm dia.18 ............. 180mm20 ............ 205mm25 ............ 254mm dia.
FRAME THICKNESS
A .............. 38mmB .............. 25mmD .............. 30mmF .............. 62mm, 65mmG .............. 89mmH .............. 107mmJ ............... 90mmK .............. 55mmP .............. 51mm
FEATURES
C .............. Permanent Split Capacitor MotorM ............. Metal ImpellerCR ............ Permanent Split Capacitor & Reverse FlowR .............. Reverse AirflowE .............. Frameless MotorMR ........... Metal Impeller & Reverse Flow
VOLTAGE
12 ............ 115 VAC23 ........... 230 VAC12/23 ....... 115/230 VAC Dual Voltage99 ........... 90 ~ 264 VAC02 ............ 24 VAC
UF 12 A R 12 - B T H NS R - _
AC AXIAL FANS
[ PART NUMBERING SYSTEM ]
27
FAN OPTIONS
Tachometer Output Signal* 4 Pole Motor: 2 pulses/revolution, square waveform8 Pole Motor: 4 pulses/revolution, square waveform
Locked Rotor Output Signal* Low voltage output changes to high voltage output in locked/stopped rotor condition
Thermistor Control Hub-mount or remote mount thermistor monitors temperature and increases/decreases RPM as required
Conformal Coating Humidity resistant protective coating applied to PC board and electronic components. Enhanced “GB” option for additional protection also available.
Encapsulated Motor IP57 encapsulated motor and PCB
PWM Speed Control This option allows for various speed adjustment of the fan via a customer supplied PWM signal into the fan through a separate input wire. The PWM frequency should be 25kHz +/- 5kHz, and the voltage should be 0.5vdc ~ 5vdc.
Custom Designs Contact Mechatronics for details
Added Value Assembly Contact Mechatronics for details. See page 60
GENERAL SPECIFICATIONS*Brushless DC Fans & BlowersRated Voltage 5, 12, 24, 48 VDC
Operating Voltage Range DC 4.5 to 6.0V for DC 5V
DC 5.5 to 14V for DC 12V
DC 10 to 28V for DC 24V
DC 24 to 56V for DC 48V
Operating Temp Range –10°C to 70°C
Storage Temp Range –40°C to 70°C
Insulating Resistance Over 10M at DC 500V
Dielectric Strength AC 500V for 1 minute
Protection Reverse polarity protection
Impeller PBT (UL94V-0)
Housing PBT (UL94V-0)
PCB Epoxy (UL94V-0)
Lead Wire Color coded UL1007 or UL1061
Bearings Abec 3, double shielded, chrome ball bearings
Sintered bronze sleeve bearings
Safety UL, C-UL File E137077; TUV
Airflow Air exhaust over struts unless otherwise specified
Life Expectancy (L10) 60,000hrs @ 40° C
Engineering
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
25˚C 35˚C
TEMPERATURE ˚C
SPEE
D (R
PM)
MAX. RATED RPM
Tachometer Output Signal*
All voltages +/– 0.5 VD C
T1 T2 T3 T41 REVOLUTION(4 Pole Motor)
VOH
A, E, F, G Series
Rated input voltage 5 VDC 12 VDC 24 VDC 48 VDC
Tachometer signal5 VDC 12 VDC 24 VDC 48 VDCoutput voltage (VOH)
Locked Rotor Output Signal*
VOH
AUTO-RESTART
LOCKED ROTOR
VOL
FAN RUNNING
Rated input voltage 5 VDC 12 VDC 24 VDC 48VDC
Locked rotor signal 4 VDC 6 VDC 12 VDC 24VDC
All voltages +/– 0.5 VD CTTL compatible signal output available
Thermistor Control
TS = 60/RPM
C o o l i n g S i m p l i f i e d*Actual specifications, tolerances and safety agency approvals vary by series. Consult Mechatronics for individual specifications.
BEARINGS
B .............. Ball
S .............. Sleeve
AIR FLOW LEVEL
SLSLMH
OPTIONS
N .............. IP55NS ........... IP55 & Salt Fog
Protection
CONNECTION
T ............... Terminal
W ............. Leadwire
ROHS COMPLIANT
CC ............ Conformal CoatingF ............... High TemperatureB1 .............. Tachometer OutputB2.............. Locked Rotor Output
28
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF60D12-_ _H 115 60 4 0.035 0.040 3,100 0.29 10.2 2.8 0.11 28 0.14
UF60D23-_ _H 230 60 4 0.016 0.020 3,100 0.29 10.2 2.8 0.11 28 0.14
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF80B12-_ _H 115 60 11 0.12 0.13 3,100 0.68 24 5.5 0.22 35 0.26
UF80B23-_ _H 230 60 14 0.07 0.08 3,100 0.68 24 5.5 0.22 35 0.26
UF80B12-_ _L 115 60 11 0.12 0.13 2,400 0.50 18 3.5 0.14 31 0.26
UF80B23-_ _L 230 60 14 0.06 0.07 2,400 0.50 18 3.5 0.14 31 0.26
(60 x 60 x 30 mm)2.36 x 2.36 x 1.18 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: exhaust over struts
Connection: 22 AWG lead wire
Protection: impedance
Option: IP55
(80 x 80 x 25 mm)3.15 x 3.15 x 0.98 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Options: dual voltage 115/130VAC,IP55; IP55 + salt fog
.08
.06
.04
.02
0 2 4 6 8 10
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.10
H
12
.12
.25
.20
.15
.10
.05
0 5 10 15 20 25
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
L
H
UF60D series
UF80B series
2.36 ±0.02(60 ±0.5)
1.97 ±0.01(50 ±0.3)
GRND
1.18 ±0.02(30 ±0.5)
0.18 ±0.01(3.5 ±0.3)
4x Ø 0.17(Ø 4.3 ±0.2)
Ø2.22(Ø56.5)
11.8(300)
3.15 ±0.02(80 ±0.5)
2.81 ±0.01(71.5 ±0.3) Ø0.17
(Ø4.3 ±0.2)
TERMINAL TYPE
LEAD WIRE TYPE
.98 ±0.02(25 ±0.5)
0.16(4)
0.12(3)
0.35(8.5)
0.31(8)
Ø2.99(Ø76)
TOC
28
AC A
XIAL FANS
29
AC A
XIAL FANS
Tel: 425 -222- 5900 Tel: 425 -222- 5900800-453-4569 800-453-4569www.mechatronics.com www.mechatronics.comE-mail: Sales@Mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 Fax: 425 -222- 5155
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF60D12-_ _H 115 60 4 0.035 0.040 3,100 0.29 10.2 2.8 0.11 28 0.14
UF60D23-_ _H 230 60 4 0.016 0.020 3,100 0.29 10.2 2.8 0.11 28 0.14
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF80B12-_ _H 115 60 11 0.12 0.13 3,100 0.68 24 5.5 0.22 35 0.26
UF80B23-_ _H 230 60 14 0.07 0.08 3,100 0.68 24 5.5 0.22 35 0.26
UF80B12-_ _L 115 60 11 0.12 0.13 2,400 0.50 18 3.5 0.14 31 0.26
UF80B23-_ _L 230 60 14 0.06 0.07 2,400 0.50 18 3.5 0.14 31 0.26
(60 x 60 x 30 mm)2.36 x 2.36 x 1.18 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: exhaust over struts
Connection: 22 AWG lead wire
Protection: impedance
Option: IP55
(80 x 80 x 25 mm)3.15 x 3.15 x 0.98 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Options: dual voltage 115/130VAC,IP55; IP55 + salt fog
.08
.06
.04
.02
0 2 4 6 8 10
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.10
H
12
.12
.25
.20
.15
.10
.05
0 5 10 15 20 25
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
L
H
UF60D series
UF80B series
2.36 ±0.02(60 ±0.5)
1.97 ±0.01(50 ±0.3)
GRND
1.18 ±0.02(30 ±0.5)
0.18 ±0.01(3.5 ±0.3)
4x Ø 0.17(Ø 4.3 ±0.2)
Ø2.22(Ø56.5)
11.8(300)
3.15 ±0.02(80 ±0.5)
2.81 ±0.01(71.5 ±0.3) Ø0.17
(Ø4.3 ±0.2)
TERMINAL TYPE
LEAD WIRE TYPE
.98 ±0.02(25 ±0.5)
0.16(4)
0.12(3)
0.35(8.5)
0.31(8)
Ø2.99(Ø76)
AIR FLOW (CFM)
.25
.20
.15
.10
.05
0 5 10 15 20 25 30 35 40
.30
L
H
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
UF80A series 1.50 ±0.02(38 ±0.5)
0.16(4)
3.15 ±0.02(80 ±0.5)
2.81 ±0.01(71.5 ±0.3) Ø0.17
(Ø4.3 ±0.2)
TERMINAL TYPE
LEAD WIRE TYPE
Ø2.99(Ø76)
0.12(3)
0.33(8.5)
0.31(8)(80 x 80 x 38 mm)
3.15 x 3.15 x 1.5 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Option: dual voltage 115/230VAC
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF80A12-_ _H 115 60 9 0.12 0.13 3,000 0.83 30 5.5 0.22 36 0.28
UF80A23-_ _H 230 60 12 0.06 0.07 3,000 0.83 30 5.5 0.22 36 0.28
UF80A12-_ _L 115 60 9 0.10 0.11 2,400 0.70 25 4.0 0.16 32 0.28
UF80A23-_ _L 230 60 12 0.05 0.06 2,400 0.70 25 4.0 0.16 32 0.28
UF92B series
.25
.20
.15
.10
.5
0 5 10 15 20 25 30 35 40
.30
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
L
H
TERMINAL TYPE
LEAD WIRE TYPE
.98 ±0.04(25)
0.16(4)
3.62 ±0.02(92 ±0.5)
3.25 ±0.01(82.5 ±0.3) Ø0.17
(Ø4.3±0.2)
Ø3.48(Ø88.5)
0.12(3)
0.33(8.5)
0.31(8)
(92 x 92 x 25 mm)3.62 x 3.62 x 0.98 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Options: dual voltage 115/130VAC,IP55; IP55 + salt fog
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF92B12-_ _H 115 60 11 0.12 0.13 3,000 1.13 40 6.5 0.26 36 0.28
UF92B23-_ _H 230 60 14 0.07 0.08 3,000 1,13 40 6.5 0.26 36 0.28
UF92B12-_ _L 115 60 11 0.11 0.12 2,300 0.70 25 4.0 0.16 32 0.28
UF92B23-_ _L 230 60 14 0.06 0.07 2,300 0.70 25 4.0 0.16 32 0.28
30
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
UF92AM series.25
.20
.15
.10
.5
0 10 20 30 40 50 60
.30
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
H
TERMINAL TYPE
LEAD WIRE TYPE
3.62 ±0.02(92.5 ±0.5)3.25 ±0.01(82.5 ±0.3) Ø0.17
(Ø4.3±0.2)
Nom. 11.8(300)
1.50 ±0.02(38 ±0.5)
0.14(3.5)
Ø3.43(Ø87)
0.12(3)
0.33(8.5)
0.31(8)
(92 x 92 x 38 mm)3.62 x 3.62 x 1.5 inches
Features: high temp; -40°C ~ 90°C operating temperature range
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; metal impeller
Bearing option: ball bearing with high temp lubricant
Motor: shaded pole - Class F insulation
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF92AM12-_ _H 115 60 11 0.12 0.17 3,200 1.45 51 7.5 0.30 42 0.43
UF92AM23-_ _H 230 60 11 0.06 0.08 3,200 1.45 51 7.5 0.30 42 0.43
0 10 20 30
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
40 50
0.05
0.10
0.15
0.20
0.25
0.30
0.35
H
UF92A series3.62 ±0.02(92 ±0.5)
1.50 ±0.02(38 ±0.5)
0.16(4)
3.25 ±0.01(82.5 ±0.3) ø0.17 ±0.01
(ø4.3 ±0.2)
11.8 ±0.75(300 ±20)
ø3.46(ø88)
0.31(8)0.33
(8.5)
0.12(3)
UL 1007 22AWG
LEAD WIRE TYPE
TERMINAL TYPE(92 x 92 x 38 mm)3.62 x 3.62 x 1.5 inches
Operating voltage: 115 or 230 VAC
Construction: die cast aluminum frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF92A12-__H 115 60 12 0.16 0.25 3,300 1.3 46 8.1 0.32 38 0.45
UF92A23-__H 230 60 12 0.09 0.13 3,300 1.3 46 8.1 0.32 38 0.45
TOC
31
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
.40
.35
.30
.20
.15
.05
0 20 40 60 80 120
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.25
.10
100
L
M
H
SL
S
L
M
H
UF12A series
LEAD WIRE TYPE
4.69 ±0.02(120 ±0.5)4.12 ±0.01
(104.8 ±0.3) ø0.17 ±0.01(ø4.3 ±0.2)
Nom. 11.8(300)
1.50 ±0.02(38 ±0.5)
0.16(4)
TERMINAL TYPE
ø4.49 ±0.02(ø114 ±0.5)
0.12(3)
0.33(8.5)
0.31(8)(120 x 120 x 38 mm)
4.69 x 4.69 x 1.5 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Option: dual voltage 115/130VAC; IP55; IP55 + salt fog
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF12A12-_ _H 115 60 12 0.16 0.23 3,100 3.0 106 8.7 0.35 46 0.53
UF12A23-_ _H 230 60 15 0.08 0.12 3,100 3.0 106 8.7 0.35 46 0.53
UF12A12-_ _M 115 60 12 0.17 0.19 2,750 2.6 92 7.0 0.28 42 0.53
UF12A23-_ _M 230 60 15 0.08 0.09 2,750 2.6 92 7.0 0.28 42 0.53
UF12A12-_ _L 115 60 12 0.15 0.16 2,300 2.3 81 4.0 0.16 38 0.53
UF12A23-_ _L 230 60 15 0.07 0.08 2,300 2.3 81 4.0 0.16 38 0.53
UF12A12-_ _S 115 60 8 0.08 0.09 2,100 1.8 64 2.8 0.11 37 0.53
UF12A23-_ _S 230 60 8 0.04 0.05 2,100 1.8 64 2.8 0.11 37 0.53
UF12A12-_ _SL 115 60 6 0.06 0.07 1,800 1.6 57 2.3 0.09 36 0.53
UF12A23-_ _SL 230 60 6 0.03 0.04 1,800 1.6 57 2.3 0.09 36 0.53
UF12B series.25
.20
.15
.10
.05
0 10 20 30 40 50 60 70 80
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER H
L
LEAD WIRE TYPE
.98 ±0.02(25 ±0.5)
0.16(4)
4.69 ±0.02(120 ±0.5)
4.12 ±0.01(104.8 ±0.3) ø0.17 ±0.01
(ø4.3 ±0.02)
TERMINAL TYPE
ø4.5 ±0.02(ø114 ±0.5)
0.12(3)
0.33(8.5) 0.31
(8)
(120 x 120 x 25 mm)4.69 x 4.69 x 0.98 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Option: dual voltage 115/130VAC
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
oz M³/Min. CFM MM INCH
UF12B12-_ _H 115 60 11 0.12 0.15 2,900 2.1 75 6.0 0.24 42 11.6
UF12B23-_ _H 230 60 14 0.07 0.08 2,900 2.1 75 6.0 0.24 42 11.6
UF12B12-_ _L 115 60 11 0.11 0.12 2,000 1.5 53 2.9 0.11 33 11.6
UF12B23-_ _L 230 60 14 0.06 0.07 2,000 1.5 53 2.9 0.11 33 11.6
TOC
32
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
0 20 40 60 80 100 120
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
.05
.10
.15
.20
.25
.30
.35
H
L
M
UF12AR series
UF12AM series
.20
.15
.10
.05
0 20 40 60 80 120
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.25
100
H
0.16(4)
Nom. 11.8(300)
ø0.17(ø4.3 ±0.2)
1.50±0.02(38 ±0.5)
4.69±0.02(120 ±0.5)
4.12±0.01(104.8±0.3)
TERMINAL TYPE
LEAD WIRE TYPE
ø4.49(ø114)
0.12(3)
0.33(8.5)
0.31(8)
0.16(4)
Ø4.49(Ø114)
Nom. 11.8(300)
Ø0.17(Ø4.3 ±0.2)
1.50 ±0.02(38 ±0.5)
4.69 ±0.02(120 ±0.5)
4.12 ±0.01(104.8 ±0.3)
TERMINAL TYPE
LEAD WIRE TYPE
0.12(3)
0.33(8.5)
0.31(8)
(120 x 120 x 38 mm)4.69 x 4.69 x 1.5 inches
Features: Reverse air flow
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame;UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: intake over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
(120 x 120 x 38 mm)4.69 x 4.69 x 1.5 inches
Features: high temp -40°C ~ 90°C operating temperature range
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; metal impeller
Bearing option: ball bearing with high temp lubricant
Motor: shaded pole - Class F insulation
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF12AR12-_ _H 115 60 11 0.19 0.20 3,100 2.8 99 8.5 0.33 47 0.53
UF12AR23-_ _H 230 60 15 0.09 0.10 3,100 2.8 99 8.5 0.33 47 0.53
UF12AR12-_ _M 115 60 11 0.17 0.19 2,750 2.4 85 6.5 0.26 45 0.53
UF12AR23-_ _M 230 60 15 0.08 0.09 2,750 2.4 85 6.5 0.26 45 0.53
UF12AR12-_ _L 115 60 11 0.15 0.16 2,300 2.1 75 4.0 0.16 38 0.53
UF12AR23-_ _L 230 60 15 0.07 0.08 2,300 2.1 75 4.0 0.16 38 0.53
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF12AM12-_ _H 115 60 13 0.15 0.22 3,100 2.9 103 6.0 0.24 46 0.55
UF12AM23-_ _H 230 60 15 0.09 0.12 3,100 2.9 103 6.0 0.24 46 0.55
TOC
33
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
0.05
0 20 40 60 80 120
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
100
H
0.10
0.15
0.20
0.25
UF13A series
UF15AC series
TERMINAL TYPE
1.50 ±0.02(38 ±0.5)
0.16(4)
5 ±0.02(127 ±0.5)
4.47 ±0.01(113.5 ±0.3)
LEAD WIRE TYPE
ø0.17(ø4.3 ±0.2)
ø4.72(ø120)
0.12(3)
0.33(8.5) 0.31
(8)
.70
.60
.40
.20
0 50 100 150 200 250
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.80
H.50
.30
.10
L
LEAD WIRE TYPE
TERMINAL TYPE
1.50 ±0.02(38 ±0.5)
5.9
1 ±
0.0
2(1
50
±0
.5)
1.26(32)
2.15(54.5)
(24) 1.99(50.5)
14.96(380)
ø0.16 ±0.01(ø4.2 ±0.2)
ø5.75(ø146)
6.77 ±0.02(172 ±0.5)
6.38 ±0.01(162 ±0.3)
0.12(3)
0.31(8)
(127 x 127 x 38 mm)5.0 x 5.0 x 1.5 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing or sintered bronze sleeve
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: impedance
Option: IP55; IP55 + salt fog
(172 x 150 x 38 mm)6.77 x 5.91 x 1.50 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF13A12-_ _H 115 60 12 0.16 0.23 3,000 3.4 120 3.5 0.14 50 0.55
UF13A23-_ _H 230 60 15 0.09 0.11 3,000 3.4 120 3.5 0.14 50 0.55
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF15AC12 -__H 115 60 28 0.23 0.38 3,400 6.0 212 19.0 0.75 58 0.72
UF15AC23 -__H 230 60 26 0.11 0.18 3,400 6.0 212 19.0 0.75 58 0.72
UF15AC12 -__L 115 60 28 0.15 0.20 1,700 2.9 103 6.5 0.26 44 0.72
UF15AC23 -__L 230 60 26 0.07 0.10 1,700 2.9 103 6.5 0.26 44 0.72
TOC
34
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
.80
.60
.40
.20
0 50 100 150 200 250
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
1.00
H
L
UF15PC series
UF15KC series
.80
.60
.40
.20
0 50 100 150 200 250
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
1.00
H
300
1.202.17 ±0.02(55 ±0.5)
LEAD WIRE TYPE
Ø5.
91 ±
0.02
(Ø15
0±0.
5)
TERMINAL TYPEt=0.5
6.77 ±0.02(172 ±0.5)
14.96(350)
55.5˚
6.38 ±0.01(162 ±0.3)
ø5.75(ø146)
.91(23)
1.69(43)
.79(20)
1.50(38)
ø0.16 ±0.01(ø4.2 ±0.2)
0.12(3) 0.31
(8)
LEAD WIRE TYPE
Ø5.
91 ±
0.02
(Ø15
0±0.
5)
2.0 ±.02(51±0.5)
TERMINAL TYPE
t = 0.5
6.77 ±0.02(172 ±0.5)
ø5.75(ø146)
ø0.16 ±0.01(ø4.2 ±0.2)
.91(23)
1.69(43)
.79(20)
1.50(38)
14.96(350)
55.5˚
6.38 ±0.01(162 ±0.3)
0.12(3)
0.31(8)
(172 x 150 x 51 mm)6.77 x 5.91 x 2.0 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame;UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Option: dual voltage 115/130VAC; IP55; IP55 + salt fog
(172 x 150 x 55 mm)6.77 x 5.91 x 2.17 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Option: dual voltage 115/130VAC; IP55; IP55 + salt fog
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF15PC12 -__H 115 60 31 0.25 0.43 3,400 6.4 226 20.0 0.79 58 0.80
UF15PC23 -__H 230 60 29 0.12 0.19 3,400 6.4 226 20.0 0.79 58 0.80
UF15PC12 -__L 115 60 31 0.15 0.20 1,700 3.0 106 5.5 0.22 37 0.80
UF15PC23 -__L 230 60 29 0.07 0.09 1,700 3.0 106 5.5 0.22 37 0.80
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF15KC12 -__H 115 60 38 0.34 0.76 3,400 8.3 293 23 0.90 60 1.05
UF15KC23 -__H 230 60 38 0.17 0.38 3,400 8.3 293 23 0.90 60 1.05
TOC
35
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
.40
.30
.20
.10
0 50 100 150 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.50
250
.70
.60
H
UF15KM series
UF15KMR series
Ø 5
.91
±0.0
4(Ø
150
±0.5
)
2.17 ±0.02(55 ±0.5)
0.31
(8)
13.7
8
(350)13
.78
(350)
6.77 ±0.02(172 ±0.5)
6.38 ±0.01(162 ±0.3)
Ø 5.39(Ø137)
0.79(20)
Ø 0.17 ±0.01 (Ø4.2 ±0.2)
0.12(3)
0.31(8)
TERMINAL TYPE
LEAD WIRE TYPE
6.77 ±0.03(172 ±0.5)
6.38 ±0.01(162 ±0.3)
Ø0.17 ±0.01(Ø4.3 ±0.2)
2.17 ±0.01(55 ±0.5)
Ø5.91 ±0.04(Ø150 ±0.5)
0.24(6)Ø5.39
(Ø137)
TERMINAL TYPELEAD WIRE
0.12(3)
13.7
8(3
50)
0.31(8)
(172 x 150 x 55 mm)6.77 x 5.91 x 2.17 inches
Features: high temp operating temperature range -40°C ~ 90°C
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; metal Impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
(172 x 150 x 55 mm)6.77 x 5.91 x 2.17 inches
Features: high temp -40°C ~ 90°C operating temperature
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; metal impeller
Bearing option: ball bearing with high temp lubricant
Motor: shaded pole - Class F insulation
Air Flow: intake over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF15KM12 -__H 115 60 42 0.47 0.75 3,250 6.5 230 16 0.63 53 1.10
UF15KM23 -__H 230 60 42 0.23 0.37 3,250 6.5 230 16 063 53 1.10
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF15KMR12 -__H 115 60 45 0.51 0.80 3,150 7.2 255 12.5 0.50 61 1.10
UF15KMR23 -__H 230 60 45 025 0.38 3,150 7.2 255 12.5 0.50 61 1.10
.60
.40
.20
0 50 100 150 200 250
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.50
.30
.10
H
TOC
36
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
UF16FC series 4.05(103) 0.28
(7)0.12(3)
2.44 ±0.02(62 ±0.5)
0.16 ±0.01(4 ±0.3)
4x Ø 0.2(Ø 5 ±0.2)
6.30 ±0.02(160 ±0.5)
5.45 ±0.01(138.5 ±0.3)
Ø 5.67(Ø 144)
1.14(29)
2.28(58)
(160 x 160 x 62 mm)6.30 x 6.30 x 2.44 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame;UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF16FC12 -__H 115 60 41 0.34 0.79 3,400 7.5 265 18.2 0.72 56 1.33
UF16FC23 -__H 230 60 41 0.17 0.41 3,400 7.5 265 18.2 0.72 56 1.33
UF17PC series
.80
.60
.40
.20
0 50 100 150 200 250
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
1.00
H
L
2.0 ±0.02(51 ±0.5)
6.77 ±0.02(172 ±0.5)
LEAD WIRE TYPE
6.77 ±0.02(172 ±0.5)
55.5
˚
ø0.16 ±0.01(ø4.2 ±0.2)
55.5˚
6.38 ±0.01(162 ±0.3)
TERMINAL TYPE
t=0.5
.91(23)
1.69(43)
.79(20)
1.50(38)
ø5.75(ø146)
14.96(350)
0.12(3)
0.31(8)
(172 dia. x 51 mm)6.77 dia. x 2.0 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Option: IP55; IP55 + salt fog
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF17PC12 -__H 115 60 31 0.25 0.43 3,400 6.4 226 20 0.79 55 0.82
UF17PC23 -__H 230 60 29 0.12 0.19 3,400 6.4 226 20 0.79 55 0.82
UF17PC12 -__L 115 60 31 0.15 0.20 1,700 3.0 106 5.5 0.22 37 0.82
UF17PC23 -__L 230 60 29 0.07 0.09 1,700 3.0 106 5.5 0.22 37 0.82
0.5
0.4
0.3
0.2
0 50 100 150 200 250
AIR FLOW - CFM
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
0.6
0.7
0.1
300
0.8
H
TOC
37
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
0 300 400 500 600 700100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
0.4
0.5
0.6
0.7
0.1
0.2
0.3
0.8
1
UF20JC series
13.78 ±0.79(350 ±20)
UL1015 22AWG
3.54 ±0.02(90 ±0.5)
6.85 ±0.01(174 ±0.3)
0.24(6)
8.07 ±0.02(205 ±0.5)
R O TAT I O N
0.12(3)
0.31(8)
ø0.24 ±0.01(ø6 ±0.2)
ø7.73(ø196.3)
LEAD WIRE TYPE
TERMINAL TYPE
(205 x 205 x 90 mm)8.07 x 8.07 x 3.54 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame, UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF20JC12 - H 115 60 98 0.90 1.22 3,200 19.3 680 19.8 0.77 71 2.40
UF20JC23 - H 230 60 98 0.45 0.61 3,200 19.3 680 19.8 0.77 71 2.40
UF18JC-4 series
H.80
.60
.40
.20
0 100 200 300 400 500
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
1.0
1.28- Ø 0.22(8- Ø 5.5 ±0.1)
7.09 ±0.02(180 ±0.5)
6.01 ±0.01(152.7 ±0.3)
Ø 6.23(Ø160)
3.54 ±0.02(90 ±0.5)
0.23(6)
(180 x 180 x 90 mm)7.09 x 7.09 x 3.54 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wires
Protection: thermal
Option: dual voltage 115/130VAC
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF18JC12 -__H 115 60 72 0.63 2.01 3,400 13 460 27 1.06 59 2.20
UF18JC23 -__H 230 60 72 0.31 1.01 3,400 13 460 27 1.06 59 2.20
TOC
38
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
H
.40
.30
.20
.10
0 200 400 600 800
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
.50
.60
.70
.80
UF25HC seriesØ9.69(Ø246)
Ø 1
0.0 ±0
.02
(Ø 2
54 ±
0.5)
4.21 ±0.02(107 ±0.5)
0.14(3.5)
RO
TATION
Ø0.18 ±0.01(Ø4.6 ±0.2)
Ø8.70(Ø221)
0.12
t = 0.5
(3)
TERMINAL TYPE
LEAD WIRE TYPE0.31(8)
(254 dia. x 107 mm)10.0 dia. x 4.21 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame;UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wire
Protection: thermal
Option: dual voltage 115/130VAC
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF25HC12-_ _H 115 60 125 1.07 1.50 2,750 24 850 17.5 0.68 65 2.50
UF25HC23-_ _H 230 60 125 0.50 0.75 2,750 24 850 17.5 0.68 65 2.50
UF25GC series
0 100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
300 400 500 600 700 800 900
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1
1
2
3
LEAD WIRE TYPE
3.5 ±0.02(89 ±0.5)
0.10(2.5)
ø10.0 ±0.03(ø254 )+1.0
– 0.5
ø0.18 ±0.01(ø4.6 ±0.2)
ø9.6 9(ø246)
ø8.6 6(ø220)
t=0.5
TERMINAL TYPE
0.12(3)
0.31(8)
(254 dia. x 89 mm)10.0 dia. x 3.5 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast frame; UL94V-0 PBT impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: exhaust over struts
Connection: terminal or 22 AWG lead wires
Protection: thermal
Option: dual voltage 115/130VAC
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg Curve
M³/Min. CFM MM INCH
UF25GC12-_ _H 115 60 33 0.29 0.51 1,650 15.5 550 10 0.40 55 1.90 1
UF25GC23-_ _H 230 60 33 0.14 0.25 1,650 15.5 550 10 0.40 55 1.90 1
UF25GCA12-_ _H 115 60 75 0.66 0.70 2,600 19.3 680 9.4 0.37 62 1.90 2
UF25GCA23-_ _H 230 60 75 0.35 0.36 2,600 19.3 680 9.4 0.37 62 1.90 2
UF25GCB12-_ _H 115 60 96 0.88 1.16 3200 23.0 812 20.7 0.82 65 2.30 3
UF25GCB23-_ _H 230 60 98 0.45 0.60 3200 23.0 812 20.7 0.82 65 2.30 3
TOC
39
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
0 100 200 300 400 500 600 700
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
0.2
0.3
0.1
0.4
0.5
0.6
0.8
0.7
0.9
H
UF200BMB-H2 series
-H2C2E(Without Frame or Guard)
8.86 ±0.02(225 ±0.5)
Ø7.79(Ø198)
Ø0.18 ±0.01(Ø4.5 ±0.2)
Ø9.45 ±0.01(Ø240 ±0.3)
PE N L
3.15 ±0.02(80 ±0.5)0.10
(2.6)
0.28(7)
0.16(4)6.68 ±0.01
(169.7 ±0.3)
Ø10.24(Ø260)
(225 x 225 x 80 mm)8.86 x 8.86 x 3.15 inches
Features: -20° ~ 70°C operating temperature range
Operating voltage: 115 or 230 VAC
Construction: metal frame and impeller
Bearing option: ball bearing with high temp lubricant
Motor: permanent split capacitor - Class F insulation
Air Flow: exhaust over struts
Connection: terminal
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF200BMB12-H2 115 60 100 0.88 1.31 3,000 17.7 625 20.5 0.81 61 1.40
UF200BMB23-H2 230 60 80 0.37 0.61 3,000 17.7 625 20.5 0.81 61 1.40
AIR OUT
AIR OUT
AIR IN
AIR IN
AIR OUT
AIR OUT
AIR IN
AIR IN
AIR OUT
AIR OUT
AIR IN
AIR IN
14.56 ±0.74(370 ±20)
2.46 ±0.12(62.5 ±3)
ø2.28 ±0.01(ø58 ±0.2)
M4
1.06(27)
90°
ø7.76(ø197 ±0-2)
-H2C2B(With Guard/No Frame)
0.15(3.9)
AIR OUT
AIR OUT
AIR IN
AIR IN
ø11.42(ø290)
0.18(4.6)
14.5 ±0.79
(370 ±20)
See page 43 for part system
TOC
40
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
-H1C2C(Without Frame or Guard)
UF250BMB-H1 series3.15 ±0.02(80 ±0.5)
0.157(4)
PE N L
0.12(3)
0.275(7)
)
)
)
11.02
8.21
±0.
01(2
08.6
±0.
3)Ø12.60(Ø320)
±0.0.02(280 ±0.5)
4-Ø 0.17 ±0.007(4-Ø 4.3 ±0.2
4-Ø 0.20 ±0.007(4-Ø 5.2 ±0.2)
Ø9.92(Ø252)
Ø11.6 ±0.01(Ø295 ±0.3
Ø11.42 ±0.01(Ø290 ±0.3
4-Ø 0.17 ±0.007(4-Ø 4.3 ±0.2)
(280 x 280 x 80 mm)11.02 x 11.02 x 3.15 inches
Features: -20° ~ 70°C operating temperature range
Operating voltage: 115 or 230 VAC
Construction: metal frame and impeller
Bearing option: ball bearing with high temp lubricant
Motor: permanent split capacitor - Class F insulation
Air Flow: exhaust over struts
Connection: terminal
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF250BMB12-H1 115 60 148 1.50 1.90 2,700 32 1130 20 0.78 70 2.80
UF250BMB23-H1 230 60 158 0.82 0.91 2,700 32 1130 20 0.78 70 2.80
-H1C2B(With Guard/No Frame)
0.15(3.9)
AIR INAIR OUT
AIR OUT AIR IN
ø11.42(ø290)
0.18(4.6)
14.5 ±0.79
(370 ±20)
2.85 ±0.12(72.3 ±3)
ø9.80(ø249 ±0
-2)
AIR INAIR OUT
AIR OUT AIR IN
ø2.28 ±0.01 (ø58 ±0.2)
14.56 ±0.79(370 ±20)
M4
1.06(27)
90°
0 200 400 600 800 1000 1200
AIR FLOW - (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
0.1
0.2
0.3
0.4
0.5
0.6
0.8
0.7
H
See page 43 for part system
TOC
41
AC A
XIAL FANS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
0 250 500
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
750 1000 1250 1500
1.2
1.0
0.8
0.6
0.4
0.2
1
1 = 60 Hz 2 = 50 Hz
2
UF300BNA series
15°
6x60
°
6- ø0.34 ±0.01(ø8.7 ±0.3)
14.9
6 ±0
.79
(380
±20
)
ø14.97 ±0.01(ø380.3 ±0.3)
ø12.
87 ±
0.02
(ø32
7 ±
0.5
)
ø15.
67 ±
0.02
(ø3
98
±0.
5)
3.16 ±0.02(80.3 ±0.5)
0.31(8)
3.87(98.3)
0.43 (11)
(398 dia. x 98.3 mm)15.67 dia. x 3.87 inches
Features: forward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base, steel frame and impeller
Bearing option: ball bearing
Motor: permanent split capacitor
Air Flow: axial
Connection: AWM 2517 lead wires
Model No.Rated
Voltage V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise dbA
Weight
kg M³/Min. CFM MM INCH
UF300BNA12-H1C2A 115 50 150 1.60 3.15 2,650 40.6 1435 31 1.2 75 4.5
115 60 200 2.40 3.10 2,950 45.7 1615 29 1.1 78 4.5
UF300BNA23-H1C2A 230 50 150 0.90 1.60 2,650 40.6 1435 31 1.2 75 4.5
230 60 200 1.20 1.56 2,950 45.7 1615 29 1.1 78 4.5
See page 43 for part system
TOC
42 Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
FAN OPTIONSDual Voltage: Many Mechatronics AC axial fans and impellers are available in a 115/230VAC dual voltage package. These models are manufactured for either 115VAC or 230VAC operation. Each fan includes 4 unique colored lead wires. Fans can be hooked up for 115VAC or 230VAC by following the wiring diagram included on each fan.
Environmental Protection: Mechatronics AC axial fans are available with optional environmental protection ranging from light coating to full encapsulation. Available options vary by model.
Conformal Coating - Fan motor windings are treated with a thin coating prior to installation into the fan frame. Conformal coating is designed for light moisture exposure such as condensation.
Encapsulated Motor - Fan motor windings are sealed with potting material to prevent water and dust ingress. Encapsulation is designed for direct water exposure and has been tested to meet IP55 requirements.
Encapsulation + Salt Fog Protection - Fan motor windings are sealed with potting material to prevent water and dust ingress. Supplemental coating is added over all exposed areas of the fan motor to prevent corrosion from salt exposure.
Multiple Speed: Some Mechatronics AC axial fans and impellers are available with 2 speed options in the same unit. Each model is supplied with 3 lead wires. Black and blue wires are used for low speed operation. Black and brown wires are used for high speed operation.
DC Alarm Output: Some Mechatronics AC fans are available with a DC alarm signal. These options include
tachometer and locked rotor output.
Black
Blue
Yellow
Brown
230V
Black
Blue
Yellow
Brown
115V
* Actual specifications, tolerances and safety agency approvals vary by model. Consult Mechatronics for individual specifications.
GENERAL SPECIFICATIONS*
Construction Aluminum die-cast frame
Features Thermoplastic UL94V-0 or metal impeller
Bearing Option High precision chrome steel ball bearings or bronze sintered sleeve
Connection Terminal or 22 AWG lead wire power connection
Protection Impedance or thermal protection
Operating Temperature Range - Ball Bearing -40°C ~ 70°C- Sleeve Bearing -20°C ~ 70°C
Dielectric Strength AC 1500V (50/60Hz) for one minute
Insulation Class B (unless otherwise noted)
Safety Agency Approvals UL, cUL File E137077 - TUV - CE
Life Expectancy (L10) 60,000hrs @ 40° C
Engineering
AC EN
GINEERIN
G
TOC
AC SERIES
SIZE (mm)
Impeller/External Rotor133 ........... 133mm dia
175 ........... 175mm dia
180 ........... 180mm dia
190 ........... 190mm dia
200 ........... 200mm dia
220 ........... 220mm dia
225(xx) ..... 225mm dia x (69, 85 or 99)
250 ........... 250mm dia
300 ........... 300mm dia
318 ........... 318mm dia
360 ........... 360mmdia
400 ........... 400mm dia
Blower90 ............. 120mm x 37mm
160 ........... 220mm x 56mm
TYPEA .............. Centrifugal
B .............. Axial
D .............. Blower
IMPELLER MATERIALA .............. Aluminum
M .............. Steel
P ............... Plastic
IMPELLER DESIGNA .............. Backward curved, single air intake
B .............. Forward curved, single air intake
C .............. Forward curved, dual air intake
VOLTAGE12 ............ 115V
23 ............ 230V
38 ............ 380V
SPEEDH1, H2, ..... High
M1, M2, .... Medium
L1, L2, ...... Low
MOTOR TYPEA .............. 3 Phase
C .............. Permanent Split Capacitor
S .............. Shaded Pole
D ............... Single Phase EC Motor
POLES2 ............... 2 Pole
4 ............... 4 Pole
6 ............... 6 Pole
CUSTOM FEATURESA .............. Standard with Frame
B .............. With Guard/No Frame
E .............. Without Frame or Guard
UF 220 A P A 12 - H1 C 2 A
AC BLOWERS & IMPELLERS
[ PART NUMBERING SYSTEM ]
C o o l i n g S i m p l i f i e d
43
TOC
44 Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC BLOW
ERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF90DPB12-H1S2A 115 60 18 0.21 0.26 2,700 0.60 21 13 0.50 51 0.66
UF90DPB23-H1S2A 230 60 18 0.10 0.12 2,700 0.60 21 13 0.50 51 0.66
(120 x 120 x 37 mm)4.72 x 4.72 x 1.46 inches
Features: single inlet blower
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 60°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: centrifugal
Connection: UL1332 26AWG lead wires
Protection: thermal
(220 x 220 x 56.2 mm)8.66 x 8.66 x 2.21 inches
Features: high pressure blower
Operating voltage: 115 or 230 VAC
Construction: metal motor base, UL94V-0 plastic frame and impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: side exhaust blower
Connection: 22 AWG lead wires
Protection: thermal
0 5.0 10.0
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
15.0 25.0
0.10
0.20
0.30
0.40
0.50
0.60
20.0
H
0 75 100 12525 50
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WAT
ER
25
20
30
40
35
5
15
10
45
1
1 = 60 Hz 2 = 50 Hz
2
UF90DPB series
UF160DPB series
AIR OUT
Rotation
AIR INM4
M4
0.08(2)
1.47 ±0.02(37.2 ±0.5)UL 1332 26AWG
2.65
(67.
4)
11.81 ±0.39
(300 ±10)
1.22(31)
0.24(6)
0.62(15.8)
AIR IN
AIR OUT
AIR OUT
AIR OUT
AIR IN
AIR IN
0.05(1.2)
0.24(6)
2.21 ±0.02(56.2 ±0.5)
5.94
(151
)
ROTATION
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF160DPB12-H1S2A 115 50 50 0.70 0.94 2,700 3.3 118 32.5 1.3 63 1.73
60 52 0.60 0.80 2,900 3.6 126 45.0 1.8 65 1.73
UF160DPB23-H1S2A 230 50 50 0.40 0.46 2,700 3.3 118 32.5 1.3 63 1.73
60 53 0.30 0.40 2,900 3.6 126 45.0 1.8 65 1.73
TOC
45Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC IM
PELLERS
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kgM³/Min. CFM MM INCH
UF133(72)APA12-H1S2A 115 50 42 0.50 0.83 2,780 4.66 165 16.6 0.65 50 0.9
115 60 41 0.43 0.72 3,200 5.33 188 22.4 0.88 60 0.9
UF133(72)APA23-H1S2A 230 50 40 0.24 0.39 2,780 4.66 165 16.6 0.65 50 0.9
230 60 39 0.21 0.34 3,200 5.33 188 22.4 0.88 60 0.9
UF133(72) series
0 25 50
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
75 100 125 150 175
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
1
1 = 60 Hz 2 = 50 Hz
2
Lead Wire Type
6-M4x0.7
ø2.28(ø58)
90
°
2.85 ±0.02(72.5 ±0.5)
15.75 ±0.79
(400 ±20)
2.39 ±0.01(60.6 ±0.3)
1.61(41)Inlet Ring
(133A)
0.1(2)
ø5
.22 ±
0.0
1(ø
132.6
±0
.3)
ø3
.69 ±
0.0
2(ø
93
.6)
(133 dia. x 72.5 mm)5.22 dia. x 2.85 inches
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: centrifugal
Connection: 22 AWG lead wire
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF133(91)APA12-H1S2A 115 50 42 0.50 0.83 2,780 4.66 165 16.6 0.65 50 0.9
115 60 41 0.43 0.72 3,200 5.33 188 22.4 0.88 60 0.9
UF133(91)APA23-H1S2A 230 50 40 0.24 0.39 2,780 4.66 165 16.6 0.65 50 0.9
230 60 39 0.21 0.34 3,200 5.33 188 22.4 0.88 60 0.9
(133 dia. x 91.5 mm)5.22 dia. x 3.60 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: shaded pole
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
0 25 50 75
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
100 125 150 200175
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
2
1 = 60 Hz 2 = 50 HzUF133(91)APA series
90º
Depth of screw max.
5mm
2.28(Ø58)
(6-M4x0.7)
AIR OUT
AIR OUT
AIR IN
AIR IN
2.39 ±0.01(60.6 ±0.3)
3.74
±0.
01(Ø
95.1
±0.
3)
5.22
±0.
01(Ø
132.
6 ±
0.3)
3.60 ±0.02(91.5 ±0.5)
15.75 ±0.75
(400 ±20)UL1332 22AW
G
TOC
46
AC IM
PELLERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF175AMA11-H1C2A 115 50 60 0.55 0.82 2,550 6.5 230 23 0.9 66 1.3
115 60 66 0.55 0.84 2,900 7.5 265 33 1.3 70 1.3
UF175AMA23-H1C2A 230 50 60 0.27 0.41 2,550 6.5 230 23 0.9 66 1.3
230 60 66 0.28 0.42 2,900 7.5 265 33 1.3 70 1.3
(175 dia. x 55 mm)6.89 dia. x 2.16 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base; steel impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
UF175AMA series
ø6.
89 ±
0.02
(ø17
5 ±
0.5)
ø5.
21±
0.02
(ø13
2.3
±0.
5)
2.16 ±0.02(54.85 ±0.5)
14.5
7±0.
4(3
70 ±
0.5)
UL
AW
M 2
517
ø2.28(ø58)
5-M4x0.7
0.1(2)
0.1(2)
0 50
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
100 150 200 250 300
0.2
0.4
0.6
0.8
1.4
1.0
1.2 1
2
1 = 60 Hz 2 = 50 Hz
(182.4 dia. x 84.9 mm)7.18 dia. x 3.34 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
370
±20
UL
AW
M 2
517
3.34 ±0.02(84.9 ±0.5)
ø7.1
8 ±
0.02
(ø18
2.4
±0.
5)
ø5.1
8 (ø
131.
5)
ø2.28(ø58)
3.10 ±0.01(77.9 ±0.3)
5- M4x0.72.35(59.8)
0.1(2)
0.1(2)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF180APA11-H1C2A 115 50 70 0.62 0.86 2,300 8.5 300 25 1.0 63 1.4
115 60 83 0.75 0.93 2,400 8.5 300 34 1.3 63 1.4
UF180APA23-H1C2A 230 50 70 0.30 0.41 2,300 8.5 300 25 1.0 63 1.4
230 60 81 0.35 0.44 2,400 8.5 300 34 1.3 63 1.4
UF180APA series
0 50
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
100 150 200 250 300
0.25
0.50
0.75
1.00
1.251
2
1 = 60 Hz 2 = 50 Hz
TOC
47Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC IM
PELLERS
(190 dia. x 70 mm)7.48 dia. x 2.75 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
UF180(55)APA series
0 50 100 150
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
200 250 300
0.25
0.50
0.75
1.00
1.25
1.50
1
2
1 = 60 Hz 2 = 50 Hz
(182 dia. x 55 mm)7.18 dia. x 2.17 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF190APA12-H1C2A 115 50 55 0.45 0.92 2,500 9.5 335 25 1.0 60 1.2
115 60 65 0.54 0.91 2,700 10.4 370 30 1.2 63 1.2
UF190APA23-H1C2A 230 50 57 0.23 0.43 2,500 9.5 335 25 1.0 60 1.2
230 60 72 0.30 0.45 2,700 10.4 370 30 1.2 63 1.2
0 50 100 150
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
200 250 300 350 400
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1
2
1 = 60 Hz 2 = 50 HzUF190APA series 2.75 ±0.02
0.1(2)
(70 ±0.5)
AIR OUT
AIR OUT
AIR IN
AIR IN
84.7Ø
±20.0
091Ø(
±)5.0
53.5Ø
±20.0
631Ø(
±)5.0
2.05 ±0.02(52 ±0.3)
º54 º54
5-M4x0.7
Ø82.2
(85Ø)
Motor Capacitor(External)
Blue
Brown
BlackLine
Voltage
Green /Yellow Ground(optional)
Motor Wiring Diagram
0.41±
05.0063(
±)0.01
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF180(55)APA12-H1C2A 115 50 63 0.60 0.92 2,550 7.5 265 26 1.0 64 1.2
115 60 78 0.70 0.95 2,800 8.3 290 36 1.4 67 1.2
UF180(55)APA23-H1C2A 230 50 63 0.30 0.46 2,550 7.5 265 26 1.0 64 1.2
230 60 78 0.34 0.48 2,800 8.3 290 36 1.4 67 1.2
Lead Wire Type
45° 45°
1.89 ±0.01(48 ±0.3)
2.17 ±0.02(55 ±0.5) 0.1
(2)
ø7.1
8 ±
0.02
(ø18
2.4
±0.
5)
ø5.
29 ±
0.02
(ø13
4.3
±0.
5)
14.5
7 ±
0.75
(370
±20
)
UL
AW
M 2
517
(5-M4 X 0.7)
AIR IN
AIR IN
ø2.28(ø58)
Motor Wiring Diagram
Motor Capacitor(External)
Blue
Brown
BlackLine
Voltage
Green/Yellow Ground(optional)
TOC
48
AC IM
PELLERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(235 dia. x 87.2 mm)9.25 dia. x 3.43 inches
Features: integrated mounting plate acts as inlet ring
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
0 25 50 75
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
100 125 150 175 200 225 250
0.25
0.50
0.75
1.00
1.25
1.50
1
2
1 = 60 Hz 2 = 50 HzUF190APA-F series 3.43 ±0.02
(87.2 ±0.5)
10.7
1 ±
0.75
(272
±20
)
ø9.25 ±0.02
(ø235 ±0.5)
ø0.2
0(4
-ø5)
ø8.66
(ø220)
3.11(79) 0.14
(3.5)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF190APA12-H2C2F 115 50 55 0.45 0.92 2,500 6.5 230 29 1.1 60 1.5
115 60 65 0.54 0.91 2,700 7.0 247 38 1.5 63 1.5
UF190APA23-H2C2F 230 50 57 0.23 0.43 2,500 6.5 230 29 1.1 60 1.5
230 60 72 0.30 0.45 2,700 7.0 247 38 1.5 63 1.5
0 100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
300 400 500 600
0.25
0.50
0.75
1.00
1.25
1.50
1.75
1
2
1 = 60 Hz 2 = 50 HzUF220APA series 2.79 ±0.02
(71 ±0.5)
AIR OUT
AIR OUT
AIR IN
AIR IN
0.1(2)
Ø8.
78 ±
0.02
(Ø22
3 ±
0.5)
05.6Ø
±20.0
561Ø(
±)5.0
2.52 ±0.01(64 ±0.3)
º54 º54
5-M4x0.7
0.41±
05.0063(
±)0.01
Ø82.2
(85Ø)
(223 dia. x 71 mm)8.78 dia. x 2.79 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF220APA12-H2C2A 115 50 90 0.63 0.88 2,500 14 500 35 1.4 65 1.5
115 60 117 0.80 0.93 2,650 15 530 38 1.7 70 1.5
UF220APA23-H2C2A 230 50 90 0.35 0.47 2,500 14 500 35 1.4 65 1.5
230 60 117 0.39 0.49 2,650 15 530 38 1.7 70 1.5
TOC
49Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC IM
PELLERS
UF220APA-F series
0 50 100 150 200 250 300
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
350 400 450
0.25
0.50
0.75
1.00
1.25
1.50
1.75
1
2
1 = 60 Hz 2 = 50 Hz
3.85 ±0.02(97.8 ±0.5)
3.30(83.9) 0.13
(3.2)ø0.
22
(6-ø
5.5)
ø9.53
(ø242)
ø10.20±0.02
(ø259 ±0.5)
10.3
1 ±
075
(26
2 ±
20
) (259 dia. x 97.8 mm)10.20 dia. x 3.85 inches
Features: integrated mounting plate acts as inlet ring
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: 22 AWG lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20) Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF225(69)APA12-H1C2A 115 60 125 1.12 2.30 2,950 15.6 550 58 2.3 72 2.3
UF225(69)APA23-H1C2A 230 60 125 0.56 1.15 2,950 15.6 550 58 2.3 72 2.3
(225 dia. x 69 mm)8.86 dia. x 2.72 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
0 100 200 300 400 500 600 700 800
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
0.5
1.0
1.5
2.0
2.5
3.0
H
UF225(69)APA seriesAIR OUT
AIR OUT
AIR IN
AIR IN
ø8.8
6 ±
0.02
(ø
225
±0.
5)
ø6.2
0 ±
0.02
(ø15
7.4
±0.
5)
2.72 ±0.02(69 ±0.5)
0.1(2)
14.6
±0.
80
(370
±20
)
2.54 ±0.01(64.6 ±0.3)
º54 º54
5-M4x0.7
Ø82.2
(85Ø)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF220APA12-H2C2F 115 50 90 0.63 0.88 2,500 12.0 424 36 1.4 64 1.9
115 60 117 0.80 0.93 2,650 12.3 434 45 1.7 65 1.9
UF220APA23-H2C2F 230 50 90 0.35 0.47 2,500 12.0 424 36 1.4 64 1.9
230 60 117 0.39 0.49 2,650 12.3 434 45 1.7 65 1.9
TOC
50
AC IM
PELLERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
(225 dia. x 85 mm)8.86 dia. x 3.35 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
0 100 200 300 400 500 600 700 800
0.5
1.0
1.5
2.0
2.5
3.0
H
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
UF225(85)APA seriesAIR OUT
AIR OUT
AIR IN
AIR IN
ø8.8
6 ±
0.02
(ø22
5 ±
0.5)
ø6.2
0 ±
0.02
(ø15
7.4
±0.
5)
3.35 ±0.02(85 ±0.5)
0.1(2)
14.6
±0.
80
(370
±20
)
3.02 ±0.01 (76.6 ±0.3)
º54 º54
5-M4x0.7
Ø82.2
(85Ø)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF225(85)APA12-H1C2A 115 60 135 1.20 2.30 3,000 19.2 680 64 2.5 75 2.3
UF225(85)APA23-H1C2A 230 60 135 0.60 1.15 3,000 19.2 680 64 2.5 75 2.3
0 100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
300 400 500 600 700 800
0.5
1.0
1.5
2.0
3.0
2.5 1
2
1 = 60 Hz 2 = 50 HzUF225(99)APA series
AIR OUT
AIR OUT
AIR IN
AIR IN
ø8.8
6 ±
0.02
(ø22
5 ±
0.5)
ø6.2
0 ±
0.02
(ø15
7.4
±0.
5)
3.90 ±0.02(99 ±0.5)
0.1(2)
14.6
±0.
80
(370
±20
)
3.52 ±0.01 (89.3 ±0.3)
º54 º54
5-M4x0.7
Ø82.2
(85Ø)
(225 dia. x 99 mm)8.86 dia. x 3.90 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF225APA(99)12-H1C2A 115 50 128 1.16 2.22 2,650 20 700 51 2.0 69 2.3
115 60 160 1.41 2.30 2,950 22 770 66 2.6 71 2.3
UF225APA(99)23-H1C2A 230 50 126 0.57 1.14 2,650 20 700 51 2.0 69 2.3
230 60 157 0.70 1.15 2,950 22 770 66 2.6 71 2.3
TOC
51Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC IM
PELLERSø0.1
8(4
-ø4.
5)
ø8.27
(ø210)
10.0
8 ±
0.75
(ø25
6 ±
20)
ø10.20 ±0.02
(ø259 ±0.5)
4.62 ±0.02(117.3 ±0.5)
4.28(108.7) 0.13
(3.2)
AIR IN
AIR IN
UF225(99)APA-F series
0 50 100
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
150 200 250 300 350 400 450 500 550
0.25
0.50
0.75
1.00
1.75
2.00
2.25
2.50
1.50
1.25
1
2
1 = 60 Hz 2 = 50 Hz
(259 dia. x 117 mm)10.20 dia. x 4.62 inchesFeatures: integrated mounting plate acts
as inlet ring
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF250APA12-H1C2A 115 50 170 1.50 3.10 2,600 22 770 56 2.2 75 3.1
115 60 240 2.10 3.00 2,700 24 850 74 2.9 76 3.1
UF250APA12-H1C2A 230 50 170 0.77 1.57 2,600 22 770 56 2.2 75 3.1
230 60 240 1.00 1.52 2,700 24 850 74 2.9 76 3.1
(251 dia. x 98 mm)9.90 dia. x 3.86 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
0 100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
300 400 500 600 700 800 900
0.5
1.0
1.5
2.0
3.0
2.5 1
2
1 = 60 Hz 2 = 50 HzUF250APA series
AIR OUT
AIR OUT
AIR IN
AIR IN
ø9.
90 ±
0.02
(ø
251.
5 ±
0.5)
ø6.
94 ±
0.02
(ø
176.
4 ±
0.5)
3.86 ±0.02(98.1 ±0.5)
0.1(2)
14.6
±0.
80
(370
±20
)
3.35 ±0.01 (85 ±0.3)
º54 º54
5-M4x0.7
Ø82.2
(85Ø)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF225APA(99)12-H1C2F 115 50 128 1.16 2.22 2,650 14.0 495 48 1.9 69 2.6
115 60 160 1.41 2.30 2,950 15.5 547 63 2.6 71 2.6
UF225APA(99)23-H1C2F 230 50 126 0.57 1.14 2,650 14,O 495 48 1.9 69 2.6
230 60 157 0.70 1.15 2,950 15.5 547 63 2.6 71 2.6
TOC
52
AC IM
PELLERS
800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 Tel: 425 -222- 5900
(259 dia. x 131 mm)10.20 dia. x 5.15 inches
Features: integrated mounting plate acts as inlet ring
Operating voltage: 115 or 230 VAC
Operating temp. -40° ~ 50°C
Construction: aluminum die cast motor base; UL94V-0 reinforced nylon impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
0 100 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
300 400 500 600 700
0.5
1.0
1.5
2.0
3.0
2.5 1
2
1 = 60 Hz 2 = 50 HzUF250APA-F series
10.3
1 ±
0.75
(262
±20
)
ø10.20 ±0.02
(ø259 ±0.5)
ø9.45
(ø240)
ø0.1
8(4
-ø4.
5)
4.24(107.6) 0.13
(3.2)
5.15 ±0.02(130.9 ±0.5)
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF250APA12-H1C2F 115 50 170 1.50 3.10 2,600 18.5 653 61 2.4 71 3.3
115 60 240 2.10 3.00 2,700 19.3 681 78 3.1 72 3.3
UF250APA12-H1C2F 230 50 170 0.77 1.57 2,600 18.5 653 56 2.4 71 3.3
230 60 240 1.00 1.52 2,700 19.3 681 78 3.1 72 3.3
0 250 500
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- M
M O
F W
ATE
R
750 1000 1250
10
20
30
40
501 = 60 Hz 2 = 50 Hz
1
2
UF318AAA series6.08 ±0.02(154.4 ±0.5) 0.20
(5)
5-M4X0.7
ø2.28(ø58˚)
45˚ 45˚
5.47 ±0.01(139 ±0.3)
ø12.
51 ±
0.02
(ø31
7.7
±0.
5)ø8
.78
±0.
02(ø
223
±0.
5)
AW
M 2
517
16.9
3 ±
0.79
(430
±20
)
AIR OUT
AIR IN
AIR IN
ROTATION
AIR OUT(318 dia. x 154 mm)12.5 dia. x 6.08 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base, aluminum impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF318AAA12-H1C4A 115 50 115 1.00 2.60 1,390 28.8 1015 30 1.2 63 3.8
115 60 160 1.43 2.40 1,580 33.0 1165 40 1.6 66 3.8
UF318AAA23-H1C4A 230 50 115 0.56 1.40 1,390 28.8 1015 30 1.2 63 3.8
230 60 160 0.70 1.30 1,580 33.0 1165 40 1.6 66 3.8
TOC
53Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
AC IM
PELLERS
16.9
3 ±0
.79
(430
±20
)
ø15
.91
± 0
.02
(ø40
4 ±
0.5)
ø10
.55
(ø26
8)
Inlet Ring(400A)
5.61 ±0.01(142.6 ±0.3)
6.39 ±0.02(162.4 ±0.5)
0.20(5)
3.54(90)
0.08(2)
UL
1332
22A
WG
M4x0.7
4-M6x1 ø3.54(ø90)
45˚ 45˚
(400 dia. x 162.4 mm)15.75 dia. x 6.39 inches
Features: backward curved impeller
Operating voltage: 230 VAC
Operating temp. -20° ~ 50°C
Construction: aluminum die cast motor base, aluminum impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Protection: thermal
(360 dia. x 167.3 mm)14.17 dia. x 6.59 inches
Features: backward curved impeller
Operating voltage: 115 or 230 VAC
Construction: aluminum die cast motor base, aluminum impeller
Bearing option: ball bearing
Motor: permanent split capacitorrequired capacitor included
Air Flow: centrifugal
Connection: AWM 2517 lead wires
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF400AAA23-H1C4A 230 50 287 1.26 1.70 1,250 53.8 1900 136.7 5.38 73 5.45
UF360AAA series
0 250 500
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
750 1000 1250 1500 1750
2.00
1.75
1.00
1.25
1.50
0.75
0.25
0.50
1
1 = 60 Hz 2 = 50 Hz
2
UF400AAA series
Model No.Rated
Voltage
V
Freq.
HZ
Input Power
W
Rated Cur.
A
LockedCur.
A
Speed
RPM
Air VolumeMax. Static
Pressure (H20)Sound Noise
dbA
Weight
kg M³/Min. CFM MM INCH
UF360AAA12-H1C4A 115 50 190 1.70 4.24 1,400 40.5 1430 40 1.6 66 5.1
115 60 270 2.26 4.00 1,600 46.5 1645 55 2.2 70 5.1
UF360AAA23-H1C4A 230 50 190 0.85 2.12 1,400 40.5 1430 40 1.6 66 5.1
230 60 265 1.13 2.00 1,600 46.5 1645 55 2.2 70 5.1
0 200
AIR FLOW (CFM)
STA
TIC
PR
ES
SU
RE
- IN
. OF
WA
TER
600 1,000 1,400 1,800
10
20
30
40
60
50
H
45° 45°
ø354(ø90)
M4x0.7
4-M6x1
0.08(2)
Inlet Ring(360A)
ø14
.17
±0.
02
(ø3
60
±0.
5)
16
.93
±0.
79(4
30
±20
)
6.59 ±0.02(167.3 ±0.5)
5.77 ±0.01(146.5 ±0.3)
3.78(96)
ø9.
84
(ø25
0)
0.20(5)
TOC
54
AC IM
PELLERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 515554
AC Motorized Impeller General Specifications*•Aluminum die cast motor base
•Nylon or metal impeller
•High precision chrome steel ball bearings
•115VAC, 230VAC or 115/230VAC dual voltage
•Thermal protection
•Class B motor insulation (unless otherwise noted)
•Operating temperature range: -20 ~ 50 degrees C (unless otherwise noted)
•Dielectric strength: AC 1500V (50/60Hz) for one minute
* Actual specifications, tolerances and safety agency approvals vary by model. Consult Mechatronics for individual specifications.
AC Motorized Impeller OptionsMechatronics offers the standard motorized impeller package as well as a unique configuration which combines the impeller and inlet ring in one complete package. The integrated inlet ring doubles as a mounting plate.
Standard motorized impeller integration requires an inlet ring to block the exhaust air from re-entering the air intake. For optimal performance, the inlet ring must be mounted to an adjacent surface aligning it with the impeller intake.
Mechatronic’s integrated inlet ring option eliminates the need for an additional adjacent surface for an inlet ring. Simply mount the device and power it up. This simplifies integration as well as reduces assembly labor time.
TOC
55
IP54 Filter Kits
Metal Fan Guards
Fan Power Cords
ACCESSO
RIES
TOC
56
VENTILATIN
G FILTERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 515556 Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
Hooded style for heavy water exposure Standard 45 degree angled filter
FILTER FRONT FILTER BACK
FAN FINGER GUARD
FILTER MEDIA
IP54 VENTILATING FILTERS
Mechatronics offers ventilating filters ranging in sizes from 105mm – 420mm. Ideal for filtering out unwanted particles and moisture to extend the service life of electronics. These filters are designed to accommodate multiple fan models with varying CFM output.
•Shallow mounting depths aid installation and application design
•Fan can be oriented for intake or exhaust
•All models are made with UV resistant ABS resin and meet UL94V-0 flammability requirements
• IP54 rated
•Optional RAL7032 or RAL7035 coating
•Optional die cast aluminum construction
TOC
57
VENTILATIN
G FILTERS
Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
IP54 FILTER KITS
PART NO� OUTER DIMS FITS MAX PANEL CUT OUT COMPATIBLE FAN SERIES
PFG-12 148.5 x 148.5 x 28 122mm x 122mm UF12B / UF12A / LPC12B / LPC12A / E1225 / G1225
F1238-H / G1238 / MQ1238 / MD1238
PFG-12X3 420 x 180 x 28 392mm x 152mm UF12B / UF12A / LPC12B / LPC12A / E1225 / G1225
F1238-H / G1238 / MQ1238 / MD1238 / UF15AC
UF15PC / UF15KC / UF15KM / UF15KMR / UF15KCR
UF17PC / MA1751
PFG-15 204 x 204 x 28 175mm x 175mm UF12B / UF12A / LPC12B / LPC12A / E1225 / G1225
F1238-H / G1238 / MQ1238 / MD1238 / UF15AC
UF15PC / UF15KC / UF15KM / UF15KMR / UF15KCR
UF17PC / MA1751
PFG-22 255 x 255 x 28 223mm x 223mm UF15AC / UF15PC / UF15KC / UF15KCR / UF15KM
UF15KMR / LPC15 / UF17PC / MA1751 / UF22
PFG-25 320 x 320 x 28 283mm x 283mm UF15AC / UF15PC / UF15KC / UF15KCR / UF15KM
UF15KMR / LPC15 / UF17PC / MA1751 / UF20 / UF22
UF25GC / UF25GCA / UF25GCR / UF25HC
PFG-80 105 dia x 22.5 90mm Diameter UF80B / UF80A / LPC80 / G8015-G / G8020 / F8025-H
G8032 / MC8038 / MQ8038
PFG-92 210 dia x 22.5 102mm Diameter UF92B / LPC92 / E9225 / G9225-G / G9232 / MD9232
PFG-80NR 110 x 130 x 50 90mm Diameter UF80B / UF80A / LPC80 / G8015-G / G8020 / F8025-H
G8032 / MC8038 / MQ8038
PFG-92NR 125 x 140 x 50 102mm Diameter UF92B / LPC92 / E9225 / G9225-G / G9232 / MD9232
Installation Method
Filter
Main Body
Hood
WEATHER SEAL
TOC
58 Tel: 425 -222- 5900 800-453-4569www.mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155
FAN
GU
ARD
S
Finger Guards
8.75(222.3)
6.85(174.0)
.18 dia(4.6) typ.25
(6.4)
SGR-14 (40 mm Fans)
1.26(32.0)
1.24(31.5)
.16 dia(4.0) typ.16
(4.0)
.18 dia(4.6) typ
2.09(53.2)
1.97(50.0)
.17(4.4)
.18 dia(4.6) typ
3.01(76.5)
2.81(71.5)
.22(5.5)
MG-25 (254 mm Fans)
MG-250-17 (280 mm Fans)
SGR-36 (92 mm Fans)
3.54(90.0)
3.25(82.5)
.18 dia(4.6) typ.22
(5.5)
SGR-24 (60 mm Fans)
MG-18 (180 mm Fans)
SGR-47 (120 mm Fans)
4.55(115.6)
4.125(105)
.18 dia(4.6) typ.22
(5.2)
SGR-31 (80 mm Fans)
MG-200 (225 mm Fans)
SGR-59 (172 mm Fans)
6.38(162.0)
6.08(154.4)
.20 dia(5.0) typ
.26(6.5)
9.45±.004(240±0.1)
8.46(215)
8.46(215)
.34±.004(8.7±0.1)
4-.24±.014-6.4±0.1
.09±.0042.4±0.1
.06±.0041.5±0.1
.09±.0042.4±0.1
3.27
±.004
83±0.
1
10.62(269.7)
11.61±.004(295±0.1)
6.25(158.75)
4-6.01(4-152.74)
24(6)
4-.24±.01(4-6±0.2)
Standard nickel chrome finish (0.0005 in.) or black upon request. Metal fan guards are designed to meet UL spacing requirements. Plastic guards are available in most frame sizes.
.xxx ±0.005
.xx ±0.02
TOC
58 59Tel: 425 -222- 5900 Tel: 425 -222- 5900800-453-4569 800-453-4569www.mechatronics.com www.mechatronics.comE-mail: Sales@Mechatronics.com E-mail: Sales@Mechatronics.com Fax: 425 -222- 5155 Fax: 425 -222- 5155
FAN
CORD
S
FAN
GU
ARD
S
Finger Guards
.34 in(18.7 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm) .61 in
(15.5 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.34 in(18.7 mm)
.75 in(19.0 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.56 in(14.2 mm)
.31 in(7.9 mm)
.33 in(8.0 mm)
.16 in(4.1 mm)
.69 in(17.6 mm)
.92 in(23.11 mm)
.65 in(15.0 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm)
.16 in(4.1 mm)
.34 in(18.7 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm) .61 in
(15.5 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.34 in(18.7 mm)
.75 in(19.0 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.56 in(14.2 mm)
.31 in(7.9 mm)
.33 in(8.0 mm)
.16 in(4.1 mm)
.69 in(17.6 mm)
.92 in(23.11 mm)
.65 in(15.0 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm)
.16 in(4.1 mm)
.34 in(18.7 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm) .61 in
(15.5 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.34 in(18.7 mm)
.75 in(19.0 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.56 in(14.2 mm)
.31 in(7.9 mm)
.33 in(8.0 mm)
.16 in(4.1 mm)
.69 in(17.6 mm)
.92 in(23.11 mm)
.65 in(15.0 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm)
.16 in(4.1 mm)
.34 in(18.7 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm) .61 in
(15.5 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.34 in(18.7 mm)
.75 in(19.0 mm)
.61 in(15.5 mm)
.16 in(4.1 mm)
.56 in(14.2 mm)
.31 in(7.9 mm)
.33 in(8.0 mm)
.16 in(4.1 mm)
.69 in(17.6 mm)
.92 in(23.11 mm)
.65 in(15.0 mm)
.51 in(12.9 mm)
.31 in(7.9 mm)
.315 in(8.0 mm)
.16 in(4.1 mm)
Mechatronics Fan Cord Specifications
Power cords come in the following four standard plug styles. All power cords come in the following standard lengths, but custom sizes are available. All cords are manufactured using 18 AWG cordage rated at 105°C, 300 volts.
PART NUMBER
CORD LENGTH
mm inches07100-12 305 1207100-24 610 2407100-36 915 3607100-40 1016 4007100-50 1270 5007100-60 1524 6007100-80 2032 80
PART NUMBER
CORD LENGTH
mm inches07145-12 305 1207145-24 610 2407145-36 915 3607145-40 1016 4007145-50 1270 5007145-60 1524 6007145-80 2032 80
PART NUMBER
CORD LENGTH
mm inches07190-12 305 1207190-24 610 2407190-36 915 3607190-40 1016 4007190-50 1270 5007190-60 1524 6007190-80 2032 80
PART NUMBER
CORD LENGTH
mm inches07199-12 305 1207199-24 610 2407199-36 915 3607199-40 1016 4007199-50 1270 5007199-60 1524 6007199-80 2032 80
8.75(222.3)
6.85(174.0)
.18 dia(4.6) typ.25
(6.4)
SGR-14 (40 mm Fans)
1.26(32.0)
1.24(31.5)
.16 dia(4.0) typ.16
(4.0)
.18 dia(4.6) typ
2.09(53.2)
1.97(50.0)
.17(4.4)
.18 dia(4.6) typ
3.01(76.5)
2.81(71.5)
.22(5.5)
MG-25 (254 mm Fans)
MG-250-17 (280 mm Fans)
SGR-36 (92 mm Fans)
3.54(90.0)
3.25(82.5)
.18 dia(4.6) typ.22
(5.5)
SGR-24 (60 mm Fans)
MG-18 (180 mm Fans)
SGR-47 (120 mm Fans)
4.55(115.6)
4.125(105)
.18 dia(4.6) typ.22
(5.2)
SGR-31 (80 mm Fans)
MG-200 (225 mm Fans)
SGR-59 (172 mm Fans)
6.38(162.0)
6.08(154.4)
.20 dia(5.0) typ
.26(6.5)
9.45±.004(240±0.1)
8.46(215)
8.46(215)
.34±.004(8.7±0.1)
4-.24±.014-6.4±0.1
.09±.0042.4±0.1
.06±.0041.5±0.1
.09±.0042.4±0.1
3.27
±.004
83±0.
1
10.62(269.7)
11.61±.004(295±0.1)
6.25(158.75)
4-6.01(4-152.74)
24(6)
4-.24±.01(4-6±0.2)
Standard nickel chrome finish (0.0005 in.) or black upon request. Metal fan guards are designed to meet UL spacing requirements. Plastic guards are available in most frame sizes.
.xxx ±0.005
.xx ±0.02
6060
Mechatronics fan design and manufacturing team provides quick turnaround on a wide
range of customized assemblies, from connector installation to complex trays. Our extensive North American fan inventory and responsive sales team can help you meet the tightest deadlines.
E X P E R I E N C E Over 100 years of in-house experience amongst our value add team.
F L E X I B L E No two projects are the same, and your options shouldn’t be limited. Mechatronics delivers rapid solutions meeting the requirements others won’t.
Q U A L I T Y Fully documented traceable assembly processes with comprehensive design evaluation, and on-site inspection for every order. Mechatronics is ISO9001:2008 certified.
T I M E L Y Providing fans and components from inventory, on-site assembly, with sales and technical groups delivering the very best solution.
MECHATRONICS VALUE ADD
TOC
FAN VALUE ADD CAPABILITIES
LEAD WIRE MANAGEMENT• Fan harnesses
• Lead wire sleeving
• Tie wrapping
• Lead wire extension
• Customized connectors
• Contact installation
CUSTOM PACKAGING OPTIONS• Individual packaging
• Custom labeling
• Partition packaging
• Custom bar coding
• Custom part marking
MECHANICAL CUSTOMIZATION• Finger guard assembly
• Fan Tray design & assembly
• Threaded inserts
• Tapped mounting holes
TOC
National Precision Bearing Group is a leading supplier of precision miniature ball bearings, aircraft bearings and industrial bearings to a worldwide market. This group operates a an ISO Class 6 clean room and relubrication facility to support the needs of their aerospace, medical, defense and industrial customer requirements.
Silverthin Bearing Group is a USA manufacturer of thin section bearings for the high technology, industrial and distribution markets.
MechPT™ creates power transmission product and supply chain solutions to reduce cost and downtime. With over 30 years experience in power transmission product supply, MechPT™ prides itself in superior knowledge and customer service bringing added value to your application.
Mechatronics Fan Group is a leading source of AC and DC axial cooling fans, blowers, impellers, fan assemblies and fan guards to the telecommunications, network equipment, office automation, medical and industrial markets.
Toll Free: (800) 453-4569Tel: (425) 222-5900Fax: (425) 222-5155www.mechatronics.com
Mechatronics Fan Group8152 304th Ave. S.E.PO Box 5012Preston, WA 98050
Email: sales@mechatronics.com
Toll Free Tel: (800) 453-4569
Tel: (425) 222-5900
Fax: (425) 222-5155
www.mechatronics.com
Toll Free Tel: (800) 426-8038
Tel: (425) 222-5900
Toll Free Fax 888-448-1153
Fax: (425) 222-5950
www.nationalprecision.com
Toll Free Tel: (866) 294-5841
Tel: (425) 222-5900
Fax: (425) 222-7535
www.silverthin.com
Tel: (425) 441-1320
Fax: (425) 654-4611
www.mechpt.com
G l o b a l S o l u t i o n s o n a N a t i o n a l L e v e l
C o o l i n g S i m p l i f i e d
Engineering Precision with Every Turn
MECHATRONICS INC. is a leading sales, distribution, and manufacturing corporation with four operating groups. Mechatronics ISO 9001:2008 and AS9100 registered operating groups are respected by customers and vendors around the world. Our corporate diversification has enabled us to achieve consistent growth for over 30 years.
07.1
9.16