Post on 24-Jul-2018
10
Refrigeration Tubes As Per Astm B280, In Coil, Soft Temper
Outside Diameter Wall Thickness Nominal Weight (kgs)
(Inch) (mm) (Inch) (mm) (15 Meters)
1/4 6.35 0.030 0.76 1.78
3/8 9.53 0.032 0.81 2.97
1/2 12.70 0.032 0.81 4.04
5/8 15.88 0.035 0.89 5.60
3/4 19.05 0.035 0.89 6.79
7/8 22.23 0.045 1.14 10.10
Tubos
TP-PN07 Rubber Insulation Foam Tape*Made of Synthetic rubber, helps to avoid condensation*Standard Size: 3mm*50mm*9.14m*Packing: individual carton and then every 30rolls in a master carton
Cintas
Properties AF30 AF40 AF50Foil Backing 30micron 40micron 50micronAdhesive System Acrylic / Rubber Acrylic / Rubber Acrylic / RubberPeel Adhesion 20-25N/25.4mm 20-25N/25.4mm 20-25N/25.4mm
Rooling Tack <=20cm <=20cm <=20cm
Temperature Rang-10°C~ +90°C -10°C~ +90°C -10°C~ +90°C
Aluminum Foil Tape
Fire-retardent Aluminum Foil Tape
Specially made to Meet needs class O of BS 476 Pt 6 &Pt7
Properties AFFS07Foil-Scrim-Kraft Backing 120micronAdhesive System Acrylic / RubberPeel Adhesion 20-30N/25.4mmRooling Tack <=20cmTemperature Rang -10°C~ +90°C
Aluminum FSK Tape
Accesoriosde Cobre (Fittings)
Cintas Eléctricas Cinta Aislante de HuleAutovulcanizable
Cinta Tefl ónCinta de Aislar DUCTAPE
11
Rubber Insulation Pipe
Nylon Clamp ID Length*Width120mm --- 380mm*5mm140mm --- 380mm*8mm185mm --- 650mm*9mm270mm --- 920mm*9mm
Suspension Band Made of galvanized perforated steel with assorted hole, which, according to the tape selected, allow fixing of threaded rods, threaded clamp, bolts, etc. The small hole can be used with rivets, screw or nails. Type SizeSU20 --- 20mm*25m
Flexible Connector•Made of metal and fire-retardent fabirc with PVC
or silicone coating•Help to prevent transmission of vibration and noise
between air treatment group and a ductwork•Temperature range from -30°C to +200°C ac-
cording to different fabric usedStandard SizeMetal Fabric Metal45mm 70mm 45mm70mm 100mm 70mm
Flexible Connector
THICKNESS
ID 3/8” 1/2” 1”
mm (Inch) pcs/ctn pcs/ctn pcs/ctn
10 (3/8) 120 120 30
13 (1/2) 100 100 28
16 (5/8) 90 90 24
19 (3/4) 72 72 20
22 (7/8) 65 65 20
25 (1) 49 49 18
28 (1 1/8) 49 49 18
32 (1 1/4) 42 42 16
35 (1 3/8) 36 36 15
42 (1 5/8) 30 30 12
48 (1 7/8) 28 28 10
51 (2) 24 24 9
54 (2 1/8) 20 20 9
60 (2 3/8) 20 20 9
67 (2 5/8) 18 18 8
73 (2 7/8) 18 18 8
76 (3) 18 18 8
79 (3 1/8) 15 15 6
89 (3 1/8) 15 15 6
12
MODEL A B C PESO
GS 800 400 400 120 kg
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
Ground Brackets GS
MODEL A B C D PESO
RS 750 850 600 260-450 100 kg
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
Roof Brackets RS
RS 750 850 600 260-450 100 kg
Wall Brackets For Outdoor Units SP
MODEL A B PESO
SP-400 400 390 110 kg
SP-450 450 390 120 kg
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
MODEL A B PESO
SP-430 430 390 110 kg
SP-550 550 490 170 kg
MODEL A B C PESO
HA-360 360 400 800 80 kg
HA-450 450 500 1000 80 kg
HA-500 500 500 1000 120 kg
HA-550 550 500 1000 140 kg
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
MODEL A B
SPW-400 400 390
SPW-430 430 390
SPW-450 450 390
SPW--550 550 490
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
Wall Brackets For Outdoor Units HA
Wall Brackets For Outdoor Units SPW
GALVANIZE STEEL BRACKETS
13
3/4” PVC 90° ELBOW
FSP1
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
FSP3
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
PLASTIC FLOOR SUPPORT
ACCESORIES FOR BRACKETS
ANTI-VIBRACION ACCESORIOS AV18 rubber feet + 4 screws + nuts + washers
FIXING KIT FS34 nogs + M10/M8 screws + washers
DRAIN HOSE (50 m ROLLS)* Made from PP (polypropileno)
3/4” RIGID PVC DRAIN TUBING(2 METERS LENGHT)
14
70
70
435
110
435
110
70
70
435
110
435
110
EMBEDDED PRE-INSTALLATION BOXRegistros de PVC para Instalación de Minisplit
Horizontal outlet EB-H
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
CLOSED EB-C
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
UNIVERSAL MINISPLIT REMOTE CONTROL *Big volume, stores of Air-conditioner remote control.*Code memory function, once set up, use it for ever.*Perfect timer and clock function.*CARRIER, CHUILAN DAIKIN, FEDDERS, FUJITSU, GREE, HAIR, HITACHI,KELON, LG, MIDEA, NATIONAL,SAMSUNG, SANYO, TOSHIBA, YORK...
MOD KT-208MOD KT-508
15
Canaletas y Accesorios de PVC para Tuberias de Aires Acondicionados
GG SYSTEM
*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface
Duct
MODEL A B LENGHT
GG-1 62 57 2M
GG-2 75 62 2M
GG-3 100 70 2M
MODEL A B C D E
QG-1 69 62 89 200 75
QG-2 94 68 110 210 75
QG-3 110 74 128 228 80
MODEL A B C
PW-1 69 62 100
PW-2 83 69 134
PW-3 102.5 74 154
MODEL A B C
CW-1 66 63 97
CW-2 81 67 100
CW-3 106 75 117
C
D
A
A
C
A
B C
B
B
EC
D
A
A
C
A
B C
B
B
E
C
D
A
A
C
A
B C
B
B
E
C
D
A
A
C
A
B C
B
B
E
16
Join
MODEL A B C
ZL-1 71 62 50
ZL-2 85 67 50
ZL-3 109 75 66
End Cover
MODEL A B C
WJ-1 25 70 67
WJ-2 45 95 67
Flexible Joint
MODEL A B C D
LR-1 45 74 66 500
LR-2 50 89 74 600
Ceiling Cap
MODEL A B C
QD-1 95 125 95
T-type Joint / Reducer Joint
MODEL A B C
ST-3 110 75 232
MODEL A1 B1 C1
BJ3-2 33 69 88
MODEL A2 B2 C2
BJ3-1 33 60 72
17
MODEL 2VP-0.5B 2VP-1B 2VP-2B 2VP-3B
Voltage 220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate
Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP
Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare
1/4” Flare3/8” Flare
Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg
2VP Series (2Stage Vacuum Pump)
MODEL VP-1C VP-1.5A VP-2B VP-3B
Voltage 220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate
Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP
Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare
1/4” Flare3/8” Flare
Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg
VP Series (1Stage Vacuum Pump)
ITEM NO. SVP-3025 SVP-5045 SVP-8065
Voltage 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz
Flow CFM 3 2.5 5 4.5 8.0 6.5Rate 1/min 84 72 142 128 226 184
Ultimate Pa 5 5 5Vacuum Mbar 0.05 0.05 0.05
Stage 1 1 1Power 1/4 HP 1/3 HP 1/2 HP
Inlet Port 1/4” Flare 1/4”&3/8’’ Flare 1/4”&3/8’’ FlareOil Capacity 250ml 350ml 320mlDimensions 290x124x225 322x124x235 344x138x248
Weight 6.8kg 8.2kg 12kg
Svp Series (1stage)
Vacuum Pump Oil
VACUUM PUMP
18
MODEL 2VP-0.5B 2VP-1B 2VP-2B 2VP-3B
Voltage 220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate
Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP
Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare
1/4” Flare3/8” Flare
Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg
2VP Series (2Stage Vacuum Pump)
MODEL VP-1C VP-1.5A VP-2B VP-3B
Voltage 220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
220V50Hz
110V60Hz
Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate
Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP
Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare
1/4” Flare3/8” Flare
Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg
VP Series (1Stage Vacuum Pump)
ITEM NO. SVP-3025 SVP-5045 SVP-8065
Voltage 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz
Flow CFM 3 2.5 5 4.5 8.0 6.5Rate 1/min 84 72 142 128 226 184
Ultimate Pa 5 5 5Vacuum Mbar 0.05 0.05 0.05
Stage 1 1 1Power 1/4 HP 1/3 HP 1/2 HP
Inlet Port 1/4” Flare 1/4”&3/8’’ Flare 1/4”&3/8’’ FlareOil Capacity 250ml 350ml 320mlDimensions 290x124x225 322x124x235 344x138x248
Weight 6.8kg 8.2kg 12kg
Svp Series (1stage)
Metallized Film Run Capacitors
Rated Cap. Dimensions
MFD mmxmmxmm
3 31.5x31.5x605 31.5x31.5x60
7.5 31.5x31.5x8010 31.5x31.5x80
12.5 31.5x31.5x8015 31.5x31.5x8020 45.5x71.5x95
20+5 45.5x71.5x9525 45.5x71.5x95
25+5 45.5x71.5x9530 45.5x71.5x95
30+5 45.5x71.5x9535 45.5x71.5x95
35+5 45.5x71.5x9540 45.5x71.5x95
40+5 45.5x71.5x11045 45.5x71.5x110
45+5 45.5x71.5x11050 45.5x71.5x110
Oval Type-CBB66Rated Votage 370V(AC)
Rated Cap. Dimensions
MFD O.D. Height
5 40 707.5 40 7010 40 70
12.5 40 7015 40 7020 40 85
20+5 50 90
25 40 10525+5 50 90
30 45 9030+5 55 90
35 50 10535+5 55 100
40 45 10540+5 60 100
45 50 10545+5 60 100
50 50 10555 50 11560 50 11565 60 11570 55 115
Round Type-CBB65Rated Votage 370V(AC)
Rated Cap. Dimensions
MFD O.D. Height
10 40 8015 40 9025 40 10530 50 10535 50 10540 50 11545 50 115
45+5 60 11550 50 13055 50 130
55+5 55 130
Round Type-CBB65Rated Votage 440V(AC)
Round Motor Start Capacitor
Cap. Dimensions
MFD O.D. Height mmxmm
88-108 1 7/16 2 3/4 36.5x69.8108-130 1 7/16 2 3/4 36.5x69.8124-149 1 7/16 2 3/4 36.5x69.8130-156 1 7/16 2 3/4 36.5x69.8145-175 1 7/16 2 3/4 36.5x69.8161-193 1 7/16 2 3/4 36.5x69.8189-227 1 7/16 2 3/4 36.5x69.8216-259 1 7/16 2 3/8 36.5x85.7233-280 1 7/16 2 3/8 36.5x85.7243-292 1 7/16 2 3/8 36.5x85.7270-324 1 13/16 2 3/8 46x85.7324-388 1 13/16 2 3/8 46x85.7340-408 1 13/16 2 3/8 46x85.7378-454 1 13/16 2 3/8 46x85.7400-480 1 13/16 4 3/8 46x111430-516 1 13/16 4 3/8 46x111460-552 1 13/16 4 3/8 46x111540-648 1 13/16 4 3/8 46x111590-708 2 1/16 4 3/8 52x111645-774 2 1/16 4 3/8 52x110708-850 2 1/16 4 3/8 52x110720-864 2 1/16 4 3/8 52x110829-995 2 1/16 4 3/8 52x110
110/125VAC
Cap. Dimensions
MFD O.D. Height mmxmm
88-108 1 13/16 2 3/8 46x85.7108-130 1 13/16 2 3/8 46x85.7124-149 1 13/16 2 3/8 46x85.7130-156 1 13/16 2 3/8 46x85.7145-175 1 13/16 4 3/8 46x111161-193 1 13/16 4 3/8 46x111189-227 1 13/16 4 3/8 46x111216-259 2 1/16 4 3/8 52x111233-280 2 1/16 4 3/8 52x111243-292 2 1/16 4 3/8 52x111270-324 2 1/16 4 3/8 52x111340-408 2 1/16 4 3/8 52x111378-454 2 1/16 4 3/8 52x111440-480 2 1/16 4 3/8 52x111
220/250VAC
Cap. Dimensions
MFD O.D. Height mmxmm
72-86 1 13/16 4 3/8 46x11188-108 2 1/16 4 3/8 52x111
108-130 2 1/16 4 3/8 52x111124-149 2 1/16 4 3/8 52x111130-156 2 1/16 4 3/8 52x111145-175 2 1/16 4 3/8 52x111161-193 2 1/16 4 3/8 52x111189-227 2 1/16 4 3/8 52x111
330VAC
18
19
Defrost Compressor Frequent Size
Voltage Capacitor µxH(mm)
330V 64µF 38x100
330V 80µF 38x100
330V 100µF 38x100
RCO Series Relay, Overload & Start Capacitor
Part. No. Gemline Robertshaw H.P. Voltage
RC0410 HS410 600-410 1/4,1/3 115V
RC0810 HS810 600-810 1/12,thru 1/5 115V
Relay and Hard Start Capacitor
Part. No. OperatingVoltage (V)
EquipmentRange (HP)
RecomenentRange (HP)
Capacitor(µF)
SPP4E 90-130 1/12 to 1 1/8 to 1 88-106
SPP5E 90-277 1/12 to 10 1/3 to 2 43-52
SPP6E 90-277 1/12 to 10 1/2 to 3 88-106
SPP7E 90-277 1/12 to 10 1 to 4 130-156
SPP8E 90-277 1/12 to 10 1 to 5 189-227
2-Pole Switching Relays
Part No. 2pno Coil Votage
90-340 24-11090-341 110 / 12090-342 208 / 240
CONTACT RATING POWER
120V 208V / 250VFull Load Amps 12 6
Resistive Amps (277 VAC) 15 15Inrush Amps 60 35Horsepower 1/2 1/2
Relay and Hard Start Capacitor
Part No. INCREASED TORQUE
SPP5 300% (270 oz.in.)
SPP6 500% (390 oz.in.)
SPP8 690% (520 oz.in.)
Hard Start Kits
Part. No. Voltage H.P. Capacitor
HS600 115-277V 1/2-5 43-52µF
HS650 115-277V 1/2-10 130-156µF
QD Series Overload Protector
Part. No. Horsepower(H.P.)
Break Time(S)
Temperature(°C)
QD-18 1/8 7-15 25±2QD-16 1/6 7-15 25±2QD-15 1/5 7-15 25±2QD-14 1/4 7-15 25±2QD-13 1/3 7-15 25±2
ICG Series Relay
Part. No. Voltage(V)
Horsepower(H.P.)
ICG-1 115 1/12 thru 1/2ICG-220 230 1/12 thru 1/2
IC Series Solid State Relay
Part. No. Voltage(V)
PTC Resistence(Ω)
IC-1 110 5±20%IC-2 220 22±20%IC-3 220 22±20%IC-4 220 22±20%
SPP Startet Pow-R-Pak
Part. No. Voltage (V) Increased Torque
SPP 115-230 210 Ounce Inches
Part. Continuo Coil Pick-Up (V) Drop-out (V) SUPCO
No. Voltage (V) Min. Max Max. MODEL
SE-63 170 139 153 55 9063SE-64 395 260 275 120 9064SE-65 332 168 182 90 9065SE-66 395 215 225 120 9066SE-67 420 295 315 125 9067SE-68 502 325 345 135 9068SE-69 336 180 195 105 9069
SE Series Potential Relay
Part. No. Pick-Up Cur-rent (A)
Drop-out Current (A)
Horsepower(H.P.)
RP-18 3.15 2.5 1/8RP-16 3.75 3 1/6RP15 4.75 3.75 1/5RP-14 5.35 4.25 1/4RP13 6 5.2 1/3RP12 8.4 7 1/2
RP Series Push-on type relay
Part. No. Resistence (�)
Voltage (V)
Current(A)
PP1100-1 5 110 4PP1100-2 22 220 6
PP1100 Series
Part. No. Voltage (V)
Horsepower(H.P.)
PO115 115 1/12 thru 1/2PO230 230 1/12 thru 1/2
PO Series
xH(mm)
RCO Series Relay, Overload & Start Capacitor
Voltage
115V
1/12,thru 1/5 115V
Relay and Hard Start Capacitor
Part. No.
2-Pole Switching Relays
Resistive Amps (277 VAC)
INCREASED TORQUE
300% (270 oz.in.)
500% (390 oz.in.)
690% (520 oz.in.)
Capacitor
43-52µF
130-156µF
Temperature(°C)
25±225±225±225±225±2
Horsepower
1/12 thru 1/21/12 thru 1/2
PTC Resistence
Increased Torque
210 Ounce Inches
Part.
No.
SE-63SE-64SE-65SE-66SE-67SE-68SE-69
SE Series Potential Relay
Part.
RP Series Push-on type relay
Part.
PP1100-1PP1100-2
PP1100 Series
PO Series
Capacitor(µF)
88-106
43-52
88-106
130-156
189-227
208V / 250V
SUPCO
MODEL
9063906490659066906790689069
Horsepower
20
MODEL Cold ON Operating Temperature (°C) Warm OFF Capillary Length
Cold OFF Warm ON (mm)
K50-P1125 -9.5 -18 8.5 - - 1200
K50-P1126 -18 -24.5 -9.5 - - 1200
K50-P1127 5 1.5 12.5 - - 1200
K50-P1272 -17 -27 -12 -20 1200
VF=K50-P1117 -22 30 7 12 1200-2550
ENDS CAPPED
K Series Thermostat
Thermostat F2000
Rating Voltage : 250V 50Hz/60HzAvailable temperature : -35°C~35°CDiferencial : 2°C~10°C
ICA Series
Part. No. Voltage(V)
Frequencuencia(Hz)
Horsepower(H.P.)
ICA-13 120 50/60 1/4,1/3ICA-15 120 50/60 1/8,1/6,1/5ICA-23 240 50/60 1/4,1/3ICA-25 240 50/60 1/8,1/6,1/5
RO Series
Part. No. ReferenciaGemline
Horsepower(H.P.)
Voltage(V)
RO-81 IC-15 1/12 thru 1/5 115
RO-41 IC-13 1/4 y 1/3 115
RO-82 ---- 1/12,1/10 y 1/8 230
RO-62 IC-25 1/6 y 1/5 230
RO-42 IC-23 1/4 y 1/3 230
Part. No. Pick-Up Cur-rent (A)
Drop-out Current (A)
OverloadCurrent (A)
BreakTimedelay
(S)
PW4.5A 3 2.5 6.5 7- -15PW5.5A 3.7 3 7.8 7- -15
PW Series
Part. No. Pick-Up Cur-rent (A)
Drop-out Current (A)
Horsepower(H.P.)
PW-S1 4.25 3.35 1/5PW-S2 4.75 3.75 1/4PW-S3 5.3 4.25 1/3
PW Series
QD-072 Series
18-240 VAC/VDC1.5 Amp.1.5 Amp. inrush.SPST, N.O.Knob-Ajustable delays from0.03 to 10 min. (1.8 to 600sec.)
Especifi caciones
QD-068 Series
18-240 VAC/VDC1.5 Amp.1.5 Amp. inrush.SPST, N.O.Knob-Ajustable delays from0.03 to 10 min. (1.8 to 600sec.)
Especifi caciones
Horsepower(H.P.)
1/4,1/31/8,1/6,1/5
1/4,1/31/8,1/6,1/5
Voltage(V)
115
115
230
230
230
BreakTimedelay
(S)
7- -157- -15
1/41/3
1200-2550
21
TERMOSTATOS
Pro T834C y T834C ThermostastSimple, Effective Control
The T834C, T8034C SUPER TRADELINE®Heating- Cooling Triple Fuel Thermostats.The adjustable heat anticipator setting range of 0.15A to 1.2A and the two jumpers incluided make the T834C and T8034C SUPER TRADELINE® Thermostats applicable to almost all single-stage heating applications. See Table 1 switch make R to Y on a temperature rise for cooling.
Termostatos de Refrigeración T834J, T8034JThe Honeywell Classic
Termostato Quality QTH60Doble Etapa Solo Frio
FEATURES • Program up to two Occupied and two Unoc-
cupied time periods for each daily schedule.• Set diff erent schedules for each day of week.• Temporary temperature overrodes.• Program copy key
Termostato Comercial LENNOX # 60L5901Programable T7300F 2168 TH5110D Termostato No-Programable
El Termostato no programable TH5110D proporciona control electrónico para sistemas de calefacción y enfriamiento de una etapa de 24 VCA o para sistemas de calefacción de 750 mV.
SPECIFICATIONSThermal DataTemperature Range: 50° F to 90° (10° C to 32°C)Differential: Stage 1 Heat -½°F to 1.2 Amps
Electrical DataSwitch Rating: 24 volts A.C. (30 VAC max) Stage 1 Heat - 1 to 1.2 Amps Cooling - .2 to 1.0 AmpsSwitch Action: Sealed Mercury Switches Stage 1 Heat & Cool - SPDTAnticipator Rating: Stage 1 Heat - .1 to 1.2 Amps Adjustable Cooling - 24 volts A.C. fi xed
Los Termostatos de refrigeración T834J y T8034J proporcionan un control de 24 a 30 Vca en sistemas derefrigeración. Un interruptor de mercurio spdt pasa de R aY en aumentos de temperatura para fi nes de refrigeración.Interruptore integrales controlan la operación deREFRIGERACIÓN-APAGADO del sistema y la operaciónde AUTOM-ENCENDIDO del ventilador.
51M32 MERIT®The Lennox Merit® Serie Thermostat 51M32 is a nonprogram-able electronic thermostat that is easy-to use and has large, easy-to-read display and excellent temperature control. The thermostat also includes a programmable fi lter change reminder and a system check indicator. The system check indi-cator will notify the user of the need for equipment service.Thermostat 51M32 is suitable for non-heat pump, single-stage heat/single cool applications that are matched with a gas or electric furnace.
51M37 MERIT®The Lennox Merit® Serie 5/2 day programable electronic thermostat 51M37 provides excellent tem-perature control and a large, easy-to-read display. It includes a programmable fi lter change reminder, anequipment maintenance reminder, and a system check indicator to notify the user when the equip-ment requires service.The 51M32 is suitable for heat pump, 3-stage heat/2-stage cool applications using a gas or electric aux-iliary heat source. An optional outdoor temerature sensor provides auxiliary heat lockout balance point operation, and dual-fuel compatibility.
Termostato 51M32 / 51M37 MERIT®
The T87 Round® is Honeywell´s most recognizable temperature control. It has kept homes comfortable for over 50 years, and its reli-able performance, classic styling, and convenience have made it and industry standard. A model for the visually impaired is an example of Honeywell´s commitment to meeting special nedds. The Round® thermostat provides temperature control for 24 to 27 Vac residential heating, cooling or heating-cooling systes
Table 1 SUPER TRADELINE® Thermostat Models and Specifi cations.
Model Aplication Mounting HeatAnticipation
Switching System Fan
FigureReference
T834C For use in gas or oil-fi red, heat pump or central electric heat systems. a.b.
vertically0.15A to 1.2A HEAT-OFF-
COOL AUTO-ON 3,4T8034C horizontally
22
Defi nites Purpose Contactors
Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase
20FLA-1POLE
2024 240/227 120 30 120 1
120 480 100 30 240 2208/240 600 80 30 ----- -----
277
One Pole
25FLA-1POLE
25
24 240/227 150 35 120 1120 480 125 35 240 2
208/240 600 100 35 ----- -----277
30FLA-1POLE
30
24 240/227 150 40 120 1120 480 125 40 240 2
208/240 600 100 40 ----- -----277
40FLA-1POLE
40
24 240/227 200 50 120 2120 480 160 50 240 3
208/240 600 120 50 ----- -----277
Two Pole Contactos
Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase
20FLA-2POLE
2024 240/227 120 30 120 1
120 480 100 30 240 2208/240 600 80 30 ----- -----
27725FLA-2POLE
25
24 240/227 150 35 120 1120 480 125 35 240 2
208/240 600 100 35 ----- -----277
40FLA-2POLE
40
24 240/227 200 50 120 2120 480 160 50 240 3
208/240 600 120 50 ----- -----277
30FLA-2POLE
30
24 240/227 150 40 120 1120 480 125 40 240 2
208/240 600 100 40 ----- -----277
Three Pole Contactos
Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase Three Phase
20FLA-3POLE
20
24 240/227 120 30 120 1.5 ----120 480 100 30 240/270 3 7.5
208/240 600 80 30 480/600 ---- 7.5277
25FLA-3POLE
25
24 240/227 150 35 120 2 ---120 480 125 35 240/270 5 10
208/240 600 100 35 480/600 --- 15277 --- 20
30FLA-3POLE
30
24 240/227 150 40 120 2 ---120 480 125 40 240/270 5 10
208/240 600 100 40 480/600 --- 15277 --- 20
40FLA3POLE
40
24 240/227 200 50 120 3 ---120 480 160 50 240/270 7.5 10
208/240 600 120 50 480/600 --- 15277 --- 20
23
Emerson # 5461Lennox Catalog# 76N18HP: 1/2, 1/3, 1/4, 1/5, 1/6RPM: 1075/4Volts: 208/230Amps: 3.5Dia: 5.6”
Direct Drive Blower
FIRST CALL MULTI-HORSEPOWER MOTORS
Emerson # 5462Lennox Catalog# 76N19HP: 1/3, 1/4, 1/5, 1/6RPM: 1075/2Volts: 208/230Amps: 2.6Dia: 5.6”
Condenser Fan
Emerson # 5460Lennox Catalog# 76N17HP: 1/2, 1/3, 1/4, 1/5, 1/6RPM: 1075/4Volts: 115Amps: 7.3Dia: 5.6”
Direct Drive Blower
Emerson # 5464Lennox Catalog# X1160HP: 1/2, 1/3, 1/4, 1/5, 1/6Volts: 208/230Amps: 1.9Dia: 5.6”
Condenser FanEmerson # 5465Lennox Catalog# X1161HP: 1/3, 1/4, 1/5, 1/6Volts: 208/230Amps: 3.0Dia: 5.6”
Condenser Fan
Condenser fan motors
Blower motors
LENNOXCAT#
EMERMFG# HP RPM VOLTS CAP MFD AMPS SHAFT N BASE XD SHELL XI TOTAL C
19P97 1860 1/4 1075 208/230 5.0 17 5.0 0.0 4.1 9.6
19P98 1861 1/3 1075 208/230 7.5 2.1 5.0 0.0 4.6 10.1
19P99 1862 1/2 1075 208/230 7.5 2.9 5.0 0.0 5.1 10.6
X2535 1868 3/4 1075 208/230 10.0 4.5 5.0 0.0 4.7 10.3
98N02 1874 1/4 825 208/230 5.0 2 6.0 0.0 4.3 10.9
91X16 1875 1/3 825 208/230 5.0 1.8 6.0 0.0 5.1 11.6
LENNOXCAT#
EMERMFG# HP RPM VOLTS CAP MFD AMPS SHAFT N BASE XD SHELL XI TOTAL C
20P68 1863 1/4 1075/3 115 5.0 3.9 5.0 4.6 4.1 10.1
20P69 1971 1/4 1075/3 208/230 5.0 1.8 5.0 4.6 4.1 10.2
20P70 1864 1/3 1075/3 115 5.0 5.2 5.0 4.9 4.9 10.4
20P03 1972 1/3 1075/3 208/230 5.0 2.4 5.0 4.9 4.3 10.4
20P72 1865 1/2 1075/3 115 5.0 8.9 5.0 5.8 5.1 11.2
20P73 1973 1/2 1075/3 208/230 5.0 4.6 5.0 5.4 4.8 10.9
74N29 8905 3/4 1075/3 208/230 10.0 4.6 4.0 6.0 5.4 10.4
4.6 10.1
5.1 10.6
4.7 10.3
4.3 10.9
5.1 11.6
SHELL XI TOTAL C
10.4
4.3 10.4
5.1 11.2
4.8 10.9
5.4 10.4
24
Electric Transformers
LENNOXCAT# DESCRIPCION
X3664 120/208/240 24 V Multi Mount 40 VA
X3665 120/208/240 24 V Foot Mount 40 VA
13N47 120/208/240 24 V Multi Mount 50 VA
X0133 120/208/240 24 V Multi Mount 50 VA
X3666 230/208/240/480 24 V Foot Mount 75 VA
Compresores Herméticos R-22
TECUMSEH 208/220-1-60 AW65519 1.5 TON AW65524 2 TON AW65530 2.5 TON AW65536 3 TON AW65546 4 TON AW65558 5 TON
COPELAND 208/220-1-60 15M62 2 TON 15M47 3 TON 15M77 4 TON 15M84 5 TON
Model DTP-3 Three Phase
•Digital voltmeter display instantaneous line voltage for all 3 phase pair
•Contactor load side monitor checks for contactor closure
•One button contactor load side voltage measurement•Automatic voltage tester adjusts from 160 to 600 volts•Adjustable response timer (0.1 to 20 sec.) prevents
nuisance tripping•Adjustable delay on break (DOB) timer ( 0 to 720
sec.) prevents rapid re-starts•Adjustable timer (0 to 30 sec.) allows sequencing of
multiple units•Off, Auto, On setting for operation with or without
control inputs•Selectable contactor test. Opens contactor if any one
of 3 circuits fall•Digital display makes for easy viewing and operation•Fault memory records up to 25 fault causes
MOTOR PROTECTOR POWER MONITOR
Model DSP-1 One Phase
•Digital voltmeter display instantaneous line voltage
•Automatic voltage tester adjusts from 90 to 300 volts
•Adjustable response timer (0.1 to 20 sec.) prevents nuisance tripping
•Adjustable delay timer ( 0 to 720 sec.) prevents rapid re-starts
•Digital display makes for easy viewing and operation
25
SADKSeries Liquid Line Filter-Driers(Alco Type)JOINT TYPE: ODF or SAEMaximun working pressure: 4.14 Mpa
SEKSeries Liquid Line Filter-Driers(Alco Type)JOINT TYPE: ODF or SAEMaximun working pressure: 4.14 Mpa
SDML/SDCLSeries Liquid Line Filter-Driers(Danfoss Type)SMDML: core-100% molecular sieves recom-mended for HFC´S with POE and PAG oils.SDCL: core-80% molecular sieves with 20% activitated alumina recommended for HCFC´sand CFC´s with mineral and alkyl benzene oils.JOINT TYPE: ODF or SAEMaximun working pressure: 4.2 Mpa
TYPE D1(in) D2(in) L(in)
D48 1.85 3.78 5.51
H48 1.85 3.78 5.51
H100 2.09 4.80 6.50
D(H) LIQUID LINE BLOCK
Filter Core
TYPE D1(in) D2(in) L(in)
LX48 3.74 5.51 0.79
LX100 4.69 6.54 1.10
LX Suction Line Filter Core
LT Drying Filter Cilinder LT-485T 5/8”, 1 CORE BLOCK
LT-487T 7/8”, 1 CORE BLOCK
LT-489T 1 1/8”, 1 CORE BLOCK
LT-967T 7/8”, 2 CORE BLOCK
LT-969T 1 1/8”, 2 CORE BLOCK
LT-9611T 1 3/8”, 2 CORE BLOCK
TYPE MOLEC. SIEVE FILTER SIZES CONECTIONgr. Φ (mm) I (mm) L (mm) A (mm) B (mm)
± 3 ± 3FD10 10 19 105 225 2.5 6.35
FD15 15 19 125 150 2.5 6.35
FD20 20 24 120 245 2.5 6.35
FD25 25 24 140 265 3.1 6.35
FD30 30 24 150 275 3.1 6.35
FD50 50 30 168 315 3.1 6.34
FILTRO
Filter Drier
Liquido limpiador de Coil
1 lto, Galón y 20 lts
Liquido limpiador de Coil
ón y 20 lts
Filtro Poro FlexUrethane Spray Can
26
TYPE D1(in) D2(in) L(in)
D48 1.85 3.78 5.51
H48 1.85 3.78 5.51
H100 2.09 4.80 6.50
D(H) LIQUID LINE BLOCK
Filter Core
TYPE D1(in) D2(in) L(in)
LX48 3.74 5.51 0.79
LX100 4.69 6.54 1.10
LX Suction Line Filter Core
LT Drying Filter Cilinder LT-485T 5/8”, 1 CORE BLOCK
LT-487T 7/8”, 1 CORE BLOCK
LT-489T 1 1/8”, 1 CORE BLOCK
LT-967T 7/8”, 2 CORE BLOCK
LT-969T 1 1/8”, 2 CORE BLOCK
LT-9611T 1 3/8”, 2 CORE BLOCK
A B
ØC
Series Liquid Line Filter-DriersSADK
TYPECONNECTION LIQUID FLOW CAPACITACITY (KW)
ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)
SADK-032 1/2 2.4 2.0 2.5 1.8 1.8 6.19
1.63SADK-032S 1/2 2.5 2.2 2.6 2.0 1.9 5.38 4.38
SADK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67
SADK-033S 3/8 3.1 2.6 3.5 2.3 2.3 4.06
SADK-052 1/4 7.3 6.0 7.9 5.3 5.2 4.81
2.63SADK-052S 1/4 12.8 10.5 13.9 9.2 9.0 4.44 3.69
SADK-053 3/8 16.2 13.3 17.6 11.7 11.4 5.13
SADK-053S 3/8 23.5 19.3 25.6 17.9 16.6 4.5 3.63
SADK-082 1/4 7.3 6.0 7.9 5.3 5.2 5.63
2.64
SADK-082S 1/4 12.8 10.5 13.9 9.2 9.0 5.25 4.50
SADK-083 3/8 19.2 15.8 20.9 3.9 13.6 5.94
SADK-083S 3/8 26.1 21.5 28.4 18.9 18.5 5.31 4.44
SADK-084 1/2 32.3 26.7 35.3 23.4 22.9 6.19
SADK-084S 1/2 36.5 29.9 39.5 26.2 25.7 5.38 4.38
SADK-162 1/4 10.3 7.6 13.6 6.3 6.2 6.56
2.64
SADK-162S 1/4 15.3 18.3 16.8 11.5 11.3 6.19 5.44
SADK-163 3/8 21.4 17.6 23.3 15.4 15.1 6.88
SADK-163S 3/8 29.0 23.9 31.6 21.0 20.5 6.25 5.25
SADK-164 1/2 42.8 35.2 46.5 30.9 30.2 7.06
SADK-164S 1/2 51.3 42.2 55.8 37.0 36.2 6.31 5.19
SADK-165 5/8 64.2 52.8 69.8 46.3 46.3 7.5
SADK-165S 5/8 64.2 52.8 69.8 46.3 46.3 6.56 5.19
SADK-167S 7/8 70.5 58.0 76.7 50.9 49.8 7.13 5.5
SADK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63
3.15
SADK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13
SADK-304 1/2 49.6 40.8 54.0 35.8 25.0 9.88
SADK-304S 1/2 54.3 44.7 59.1 39.2 38.4 9.06 8.06
SADK-305 5/8 67.6 55.6 63.5 48.8 47.8 10.31
SADK-305S 5/8 72.7 59.8 79.1 52.5 51.4 9.31 8.06
SADK-306 3/4 73 59.8 79.5 52.5 51.8 10.68
SADK-306S 3/8 82.4 67.3 88.3 58.4 57.4 9.68 8.43
SADK-307S 7/8 98.4 81.0 107.0 71.1 69.6 9.88 8.38
SADK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50
SADK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75
3.66
SADK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00
SADK-414S 1/2 63.3 52.2 70.4 43.7 43.1 9.9 8.19
SADK-415 5/8 81.3 66.9 88.5 58.7 57.5 10.44
SADK-415S 5/8 81.3 66.9 88.5 58.7 57.5 9.44 8.19
SADK-417 7/8 100.5 82.7 109.5 72.5 71.0 9.88 8.19
SADK-419 1-1/8 11.6 91.8 121.4 80.5 78.8 10.38 8.56
27
A
SE
K S
ER
IE
SA
DK
SE
RIE
B
ØC
A B
ØC
C S
ER
IE Lar go
Lar go
Socket
Depth
Series Liquid Line Filter-DriersSEK
TYPECONNEC-
TION LIQUID FLOW CAPACITACITY (KW)
ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)
SEKL-032 1/4 2.0 16.1 2.2 1.4 1.4 4.39
1.63SEK-032S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13
SEK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67
SEK-033S 3/8 3.0 2.5 3.3 2.2 2.1 4.06 3.19
SEK-052 1/4 9.0 7.4 9.8 6.5 6.3 4.81
2.64SEK-052S 1/4 13.3 10.9 14.4 9.6 9.4 4.44 3.69
SEK-053 3/8 21.4 17.6 23.3 15.4 15.1 5.13
SEK-053S 3/8 26.5 21.8 28.9 19.1 18.7 4.5 3.36
SEK-082 1/4 8.6 7.0 9.3 6.2 6.0 5.63
2.64
SEK-082S 1/4 13.7 11.3 14.6 9.9 9.7 5.25 4.5
SEK-083 3/8 21.8 18.0 23.7 15.7 15.4 5.94
SEK-083S 3/8 27.4 22.5 29.8 19.8 19.3 5.31 4.44
SEK-084 1/2 10.3 7.6 73.6 6.3 6.2 6.56
SEK-084S 1/2 15.3 13.8 16.8 11.5 11.3 6.19 5.44
SEK-162 1/4 2.8 1.6 2.2 1.4 1.4 4.39
2.64
SEK-162S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13
SEK-163 3/8 22.2 18.3 24.2 16.1 15.7 6.88
SEK-163S 3/8 31.7 26.0 34.8 22.9 22.4 6.25 5.38
SEK-164 1/2 38.5 31.7 41.9 27.8 27.2 7.06
SEK-164S 1/2 49.6 40.8 54.0 35.8 35.1 6.31 5.31
SEK-165 5/8 50.5 41.5 54.0 36.4 35.7 7.5
SEK-165S 5/8 67.2 55.3 73.1 48.5 47.5 6.56 5.31
SEK-167S 7/8 70.0 58.1 76.8 51.0 49.5 7.13 5.63
SEK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63
3.15
SEK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13
SEK-304 1/2 43.6 35.9 47.5 31.5 30.8 9.88
SEK-304S 1/2 54.1 44.7 59.1 39.2 38.4 9.06 8.06
SEK-305 5/8 55.6 45.8 60.5 40.1 39.3 10.31
SEK-305S 5/8 74.0 60.9 80.5 53.4 52.3 9.31 8.06
SEK-306S 3/4 8.24 63.3 88.3 58.4 57.4 9.68 8.43
SEK-307S 7/8 83.4 68.6 90.8 60.2 59.0 9.88 8.38
SEK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50
SEK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75
SEK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00
3.66
SEK-414S 1/2 63.3 50.2 70.4 43.7 43.1 9.19 8.19
SEK-415 5/8 68.5 56.3 74.5 49.4 48.4 10.44
SEK-415S 5/8 78.3 64.4 85.2 56.5 55.3 9.44 8.19
SEK-417S 7/8 106.5 87.6 115.9 76.9 75.3 9.88 8.38
SEK-419S 1-1/8 113.8 93.6 123.8 82.1 80.4 10.38 8.56
3.66SEK-757S 7/8 22.8 18.2 24.1 16.1 15.6 15.43 13.9
SEK-759S 1-1/8 32.7 26.8 35.4 23.7 23.0 15.75 13.63
28
Series Liquid Line Filter-DriersSEK
TYPECONNEC-
TION LIQUID FLOW CAPACITACITY (KW)
ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)
SEKL-032 1/4 2.0 16.1 2.2 1.4 1.4 4.39
1.63SEK-032S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13
SEK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67
SEK-033S 3/8 3.0 2.5 3.3 2.2 2.1 4.06 3.19
SEK-052 1/4 9.0 7.4 9.8 6.5 6.3 4.81
2.64SEK-052S 1/4 13.3 10.9 14.4 9.6 9.4 4.44 3.69
SEK-053 3/8 21.4 17.6 23.3 15.4 15.1 5.13
SEK-053S 3/8 26.5 21.8 28.9 19.1 18.7 4.5 3.36
SEK-082 1/4 8.6 7.0 9.3 6.2 6.0 5.63
2.64
SEK-082S 1/4 13.7 11.3 14.6 9.9 9.7 5.25 4.5
SEK-083 3/8 21.8 18.0 23.7 15.7 15.4 5.94
SEK-083S 3/8 27.4 22.5 29.8 19.8 19.3 5.31 4.44
SEK-084 1/2 10.3 7.6 73.6 6.3 6.2 6.56
SEK-084S 1/2 15.3 13.8 16.8 11.5 11.3 6.19 5.44
SEK-162 1/4 2.8 1.6 2.2 1.4 1.4 4.39
2.64
SEK-162S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13
SEK-163 3/8 22.2 18.3 24.2 16.1 15.7 6.88
SEK-163S 3/8 31.7 26.0 34.8 22.9 22.4 6.25 5.38
SEK-164 1/2 38.5 31.7 41.9 27.8 27.2 7.06
SEK-164S 1/2 49.6 40.8 54.0 35.8 35.1 6.31 5.31
SEK-165 5/8 50.5 41.5 54.0 36.4 35.7 7.5
SEK-165S 5/8 67.2 55.3 73.1 48.5 47.5 6.56 5.31
SEK-167S 7/8 70.0 58.1 76.8 51.0 49.5 7.13 5.63
SEK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63
3.15
SEK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13
SEK-304 1/2 43.6 35.9 47.5 31.5 30.8 9.88
SEK-304S 1/2 54.1 44.7 59.1 39.2 38.4 9.06 8.06
SEK-305 5/8 55.6 45.8 60.5 40.1 39.3 10.31
SEK-305S 5/8 74.0 60.9 80.5 53.4 52.3 9.31 8.06
SEK-306S 3/4 8.24 63.3 88.3 58.4 57.4 9.68 8.43
SEK-307S 7/8 83.4 68.6 90.8 60.2 59.0 9.88 8.38
SEK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50
SEK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75
SEK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00
3.66
SEK-414S 1/2 63.3 50.2 70.4 43.7 43.1 9.19 8.19
SEK-415 5/8 68.5 56.3 74.5 49.4 48.4 10.44
SEK-415S 5/8 78.3 64.4 85.2 56.5 55.3 9.44 8.19
SEK-417S 7/8 106.5 87.6 115.9 76.9 75.3 9.88 8.38
SEK-419S 1-1/8 113.8 93.6 123.8 82.1 80.4 10.38 8.56
3.66SEK-757S 7/8 22.8 18.2 24.1 16.1 15.6 15.43 13.9
SEK-759S 1-1/8 32.7 26.8 35.4 23.7 23.0 15.75 13.63
A
SE
K S
ER
IE
SA
DK
SE
RIE
B
ØC
A B
ØC
C S
ER
IE Larg o
Larg o
Socket
Depth
Series Liquid Line Filter-DriersSDML/SDCL
TYPE CONNECTION
LIQUID FLOW CAPACITACITY (KW)
R134a R404aR507
R22R407CR410A
R13aR507
R407a R22R407CR410A
DESICCANT (CU. IN)
SDML/SDCL-032 1/4SAE2 1.5 2 15
12
SDML:24
SDCL:19
14.5
113
SDML/SDCL-032S 1/4ODF
SDML/SDCL-033 3/8SAE5 3.5 5.5
SDML/SDCL-033S 3/8ODF
SDML/SDCL-052 1/4SAE 2 1.5 219
14.5
SDML:28.5
SDCL:23
17.5
1355
SDML/SDCL-052S 1/4ODF
SDML/SDCL-053 1/8SAE5 4 5.5
SDML/SDCL-053S 3/8ODF
SDML/SDCL-082 1/4SAE2 1.5 2
27.5
22
SDML:44
SDCL:33.5
27.5
21
8
SDML/SDCL-082S 1/4ODF
SDML/SDCL-083 3/8SAE5.5 4 6
SDML/SDCL-083S 3/8ODF
SDML/SDCL-084 1/2SAE7.5 5.5 8
SDML/SDCL-084S 1/2ODF
SDML/SDCL-162 1/4SAE2 1.5 2
59.5
52
SDML:96
SDCL:80.5
59.5
47.5
16
SDML/SDCL-162S 1/4ODF
SDML/SDCL-163 3/8SAE6 4.5 6.5
SDML/SDCL--163S 3/8ODF
SDML/SDCL-164 1/2SAE8.5 6 9
SDML/SDCL-164S 1/2ODF
SDML/SDCL-165 5/8SAE12 8.5 13.5
SDML/SDCL-165S 5/8ODF
SDML/SDCL-166S 3/4ODF 12 8.5 13.5
SDML/SDCL-167S 3/8ODF 12 8.5 13.5
SDML/SDCL-303 3/8SAE6 4.5 6.5
126
104
SDML:204
SDCL:169
126
97
30
SDML/SDCL-303S 3/8ODF
SDML/SDCL-304 1/2SAE8.5 6 9.5
SDML/SDCL-304S 1/2ODF
SDML/SDCL-305 5/8SAE12.5 9 14
SDML/SDCL-305S 5/8ODF
SDML/SDCL-306S 3/4ODF 16.5 12 18.5
SDML/SDCL-307S 7/8ODF 16.5 12 18.5
SDML/SDCL-309S 1-1/8ODF 17.5 12.5 19
29
”C” Series Liquid Line Filter-Driers
“C”LIQUID
SAE
SERIESLINE TYPE
ODF
CONNECTIONSIZE
(Inches)
VOLUME OFDESICCANT
M2
OVERALL LENGTH(mm)
SOLDER SOCKETDEPTH(mm)
DIAMETEROF BODY
(mm)SAE ODF
C-032 C-032S 1/449
106 97 1044
C-033 C-033S 3/8 119 99 11
C-052 C-052S 1/482
121 106 1062
C-053 C-053S 3/8 132 109 11
C-082 C-082S 1/4
147
143 130 10
67C-083 C-083S 3/8 154 133 11
C-084 C-084S 1/2 160 138 13
C-162 C-162S 1/4
262
159 146 10
76
C-163 C-163S 3/8 171 149 11
C-164 C-164S 1/2 176 152 13
C-165 C-165S 5/8 184 160 16
C-167S 7/8 176 19
C-303 C-303S 3/8
492
246 226 11
76
C-304 C-304S 1/2 251 229 13
C-305 C-306S 5/8 259 235 16
C-30SS 3/8 245 16
C-307S 7/8 249 19
C-309S 1-1/8 248 24
C-413 3/8
672
243
89
C-414 C-414S 1/2 252 230 13
C-415 C-415S 5/8 260 237 16
C-417S 7/8 249 19
C-419S 1-1/8 248 24
C-607S 7/8983
406 1976
C-609S 1-1/8 406 24
A
SEK SERIE
SADK SERIE
B
ØC
AB
ØC
C SERIE
Largo Largo
Socket Depth
30
Tools and Accesories
COLOR
CT-601 Brass testing manifold, with hook, hose holder and two end handwheels. Testing Manifold Set, includes item No CT-601, 3 Pcs Changing Hose and 2 Pcs 2-3/4” dia. Guage.CT-636-G With 3pcs 36” hoses.CT-660-G With 3pcs 60” hoses.CT-672-G With 3pcs 72” hoses.
Manifold
RG-250Low side 30 vacuumto 250psi 1/8”NPTconnection blue color2-3/4” dia Scale forR12, R22, R502, °F,psi, kg/cm2.
Refrigerant Gauge
RG-500High side 0 vacuumto 500psi 1/8”NPTconnection 2-3/4” dia Red color, Scale forR12, R22, R502, °F,psi, kg/cm2.
CH-134LLow side 30 vacuumto 250psi 1/8”NPTconnection 2-3/4” dia,Scale for R134A, °F,psi, kg/cm2.
CH-134HHigh side 0 to 500 psi 1/8”NPT connection2-3/4” dia. Scale forR134A, °F, psi, kg/cm2.
Charging Hose1/4” SAE connection.500PSI/2500PSI.
CT-336RYB 3pcs 36” hoses set.CT-360RYB 3pcs 60” hoses set.CT-372RYB 3pcs 72” hoses set.CT-396RYB 3pcs 96” hoses set.
CT-501 Brass testing manifold, with hook, hose holder and two end handwheels. (with sight glass) Testing Manifold Set, includes item No CT-501, 3 Pcs Changing Hose and 2 Pcs 2-3/4” dia. Guage.CT-536-G With 3pcs 36” hoses.CT-560-G With 3pcs 60” hoses.CT-572-G With 3pcs 72” hoses.
ITEM NO Solder Type
CT-802-04 1/4” Tubo Extendido
CT-802-06 3/8” Tubo Extendido
CT-802-08 1/2” Tubo Extendido
CT-802-10 5/8” Tubo Extendido
Sight Glass
ITEM NO Male Female
CT-802-04 1/4” 1/4”
CT-802-06 3/8” 3/8”
CT-802-08 1/2” 1/2”
CT-802-10 5/8” 5/8”
Sight Glass
Doble FlareITEM NO
TubeO.D.
CT-800-04C 1/4” With Two Nuts
CT-800-06C 3/8” With Two Nuts
CT-800-08C 1/2” With Two Nuts
CT-800-10C 5/8” With Two Nuts
Sight Glass
31
COLOR
ITEM NO Tube Connection thread
AV-1A 1/4” 7/16”
AV-2A 3/8” 5/8”
AV-3A 1/2” 3/4”
AV-4A 5/8” 7/8”
AV-5A 3/4” 1-1/16”
Split A/C Valve
ITEM NO Tube Connection thread
AV-1B 1/4” 7/16”
AV-2B 3/8” 5/8”
AV-3B 1/2” 3/4”
AV-4B 5/8” 7/8”
AV-5B 3/4” 1-1/16”
Split A/C Valve
With 6cm or 10cm Extension copper tube
SU-041/4” O.D.
Access Valve with core remover
CH-339 Can Top Valves for134A
Design for Cans with12mmx1.5mm Thread,10mm outlet connection.
CH-338 Can Top Valves forR12
Design for Cans with12mmx1.5mm Thread,1/4” SAE outlet connection.
CH-340 Can Top Valves
Sustable for any fl at orscrew type cans, 1/4” SAE outlet connection.
CT-S-04-1/4”
CT-S-06-3/8”
CT-S-08-1/2”
CT-S-10-5/8”
CT-S-12-3/4”
Hand Valve Solder
CT-D-04-1/4”
CT-D-06-3/8”
CT-D-08-1/2”
CT-D-10-5/8”
CT-D-12-3/4”
Hand Valve Flare
ITEM NOTube O.D.
InchU-04 1/4U-05 5/16U-06 3/8U-08 1/2U-10 5/8U-12 3/4
Union
ITEM NOTube O.D.
InchU-04 1/4U-06 3/8U-08 1/2U-10 5/8U-12 3/4
Forged Brass Nut
ITEM NOTube O.D.
Inch
FSU-04x04 1/4FSU-06x06 3/8FSU-08x08 1/2FSU-10x10 5/8
Forged to Solder Union
ITEM NOTube O.D.
Inch
UT-04 1/4UT-06 3/8UT-08 1/2UT-10 5/8UT-12 3/4
Union Tee
ITEM NOTube O.D.
Inch
UE-04 1/4UE-06 3/8UE-08 1/2UE-10 5/8
Union Elbow
3232
COLOR
CT-275LFlares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.and two end hand-wheels.
Tubing Tool Kits
Item No. OutsedeDiameterof Tubing
in.
NominalSizein.
Radius toCenterof Tube
in.CT-364A-04 1/4 1/8 9/16CT-364A-05 5/16 ------- 1-1/16CT-364A-06 3/8 1/2 1-5/16CT-364A-08 1/2 3/8 1-1/2CT-364A-10 5/8 1/2 2-1/4CT-364A-12 3/4 5/8 3CT-364A-14 7/8 3/4 3CT-364M-04 6 14.2 9/16CT-364M-05 8 17.5 1-1/16CT-364M-06 10 24.0 1-5/16CT-364M-08 12 38.1 1-1/2CT-364M-10 16 57.2 2/1/4CT-364M-12 19 76.2 3CT-364M-14 22 76.2 3
Flaring ToolCT-195Flares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.
CT-102-04 Size 1/4” Length 10”CT-102-05 Size 5/16” Length 10”CT-102-06 Size 3/8” Length 10”CT-102-08 Size 1/2” Length 12”CT-102-10 Size 5/8” Length 14”CT-102-12 Size 3/4” Length 14”
Spring Bender
CT-808 AMCONTENIDO DEL KIT:Flares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.and two end hand-wheels.
CT-95 Swagging PunchesFor 1/4”, 5/16”, 3/8” O.D. Tubing90 degree bent
Tube BenderInch Size Tube Bender
CT-193 Set of 5 Swagging Punhes90 degree bent
CT-274 Tube Cutter90 degree bent
CT-127 Tube Cutter90 degree bent
CT-174 ”BigCT” Tube Cutter90 degree bent
CT-368 3-IN-1For 1/4”, 5/16”, 3/8” O.D. Tubing90 degree bent
CT-369 3-IN-1180 degree bent
CT-208 Inner-Outer Reamer
CT-352 Steel Fin straightener
CT-204 Pinch Off Tool CT-201 Pinch Off Plier 7”
33
ASPAS18 4 ALABS 18” ASPAS20 4 ALABS 20” ASPAS22 4 ALABS 22” ASPAS24 4 ALABS 24”
Condenser Fan Blades
Núcleo 1/2”
SS AWS A5.8 Ag Cu Zn Ni Sn Otros SOLIDOS °F °C
LIQUIDOS °F °C
FLUIDITY RATING**
SS 0 BCuP-2 92.9 7.1P 1310-710 1475-802 5
SS 5 BCuP-3 5 89.0 6.0P 1190-643 1500-816 3
SS 15 BCuP-5 15 80.0 5.0P 1190-643 1480-804 3
SS 25 25 43 30 2 1270-688 1435-779 5
High Pressure & Low Pressure Quick Coupler
Silver Solder Flux
Standard Packing
Silver SolderSoldering Alloys
QC-SML4QC-SM
QC-SMH441/4” SAE
QC-12LQC-12
QC-12H1/4” SAE
34
SUNISO GS
SUNISO GS oils are premiun quality oils expressly designed for use as refrigeration compressor lubri-cants.
• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.
• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.
• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.
Chemicala StabilityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 1Thermal StabilityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 2Low Wax ContentTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability
3Low Pour PintTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 4High Dialectreic StrengthTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 5Proper ViscosityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 6No ContaminationTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 7
Property SUNISO 3GS SUNISO 4GS SUNISO 5GS
Density 15°C g/cm3 0.909 .0915 0.921Viscosity 100°C mm2/s 4.31 5.97 7.78Pour Point °C 0.01 0.01 0.01Floc Point °C -53 -46 -35
TYPICAL DATA• Floc Test 3 GS at -50˚C Refrigerant : R-12
SUNISO GS Oils don`t precipitate wax deposit in an extremely low temperature section of the system such as valve or evaporator.
• Pour Point 3 GS at -40˚C
SUNISO GS Oils are featuring outstanding fl uifi ty a low temperature condition resulting good oil returning in the refrigeration systems
REFRIGERATION OILS