Accesorios de Cobre (Fittings) Cintas - Almacenes … · 10 Refrigeration Tubes As Per Astm B280,...

25
10 Refrigeration Tubes As Per Astm B280, In Coil, Soft Temper Outside Diameter Wall Thickness Nominal Weight (kgs) (Inch) (mm) (Inch) (mm) (15 Meters) 1/4 6.35 0.030 0.76 1.78 3/8 9.53 0.032 0.81 2.97 1/2 12.70 0.032 0.81 4.04 5/8 15.88 0.035 0.89 5.60 3/4 19.05 0.035 0.89 6.79 7/8 22.23 0.045 1.14 10.10 Tubos TP-PN07 Rubber Insulation Foam Tape *Made of Synthetic rubber, helps to avoid condensation *Standard Size: 3mm*50mm*9.14m *Packing: individual carton and then every 30rolls in a master carton Cintas Properties AF30 AF40 AF50 Foil Backing 30micron 40micron 50micron Adhesive System Acrylic / Rubber Acrylic / Rubber Acrylic / Rubber Peel Adhesion 20-25N/25.4mm 20-25N/25.4mm 20-25N/25.4mm Rooling Tack <=20cm <=20cm <=20cm Temperature Rang-10°C ~ +90°C -10°C ~ +90°C -10°C ~ +90°C Aluminum Foil Tape Fire-retardent Aluminum Foil Tape Specially made to Meet needs class O of BS 476 Pt 6 &Pt7 Properties AFFS07 Foil-Scrim-KraftBacking120micron Adhesive System Acrylic / Rubber Peel Adhesion 20-30N/25.4mm Rooling Tack <=20cm Temperature Rang -10°C ~ +90°C Aluminum FSK Tape Accesorios de Cobre (Fittings) Cintas Eléctricas Cinta Aislante de Hule Autovulcanizable Cinta Teflón Cinta de Aislar DUCTAPE

Transcript of Accesorios de Cobre (Fittings) Cintas - Almacenes … · 10 Refrigeration Tubes As Per Astm B280,...

10

Refrigeration Tubes As Per Astm B280, In Coil, Soft Temper

Outside Diameter Wall Thickness Nominal Weight (kgs)

(Inch) (mm) (Inch) (mm) (15 Meters)

1/4 6.35 0.030 0.76 1.78

3/8 9.53 0.032 0.81 2.97

1/2 12.70 0.032 0.81 4.04

5/8 15.88 0.035 0.89 5.60

3/4 19.05 0.035 0.89 6.79

7/8 22.23 0.045 1.14 10.10

Tubos

TP-PN07 Rubber Insulation Foam Tape*Made of Synthetic rubber, helps to avoid condensation*Standard Size: 3mm*50mm*9.14m*Packing: individual carton and then every 30rolls in a master carton

Cintas

Properties AF30 AF40 AF50Foil Backing 30micron 40micron 50micronAdhesive System Acrylic / Rubber Acrylic / Rubber Acrylic / RubberPeel Adhesion 20-25N/25.4mm 20-25N/25.4mm 20-25N/25.4mm

Rooling Tack <=20cm <=20cm <=20cm

Temperature Rang-10°C~ +90°C -10°C~ +90°C -10°C~ +90°C

Aluminum Foil Tape

Fire-retardent Aluminum Foil Tape

Specially made to Meet needs class O of BS 476 Pt 6 &Pt7

Properties AFFS07Foil-Scrim-Kraft Backing 120micronAdhesive System Acrylic / RubberPeel Adhesion 20-30N/25.4mmRooling Tack <=20cmTemperature Rang -10°C~ +90°C

Aluminum FSK Tape

Accesoriosde Cobre (Fittings)

Cintas Eléctricas Cinta Aislante de HuleAutovulcanizable

Cinta Tefl ónCinta de Aislar DUCTAPE

11

Rubber Insulation Pipe

Nylon Clamp ID Length*Width120mm --- 380mm*5mm140mm --- 380mm*8mm185mm --- 650mm*9mm270mm --- 920mm*9mm

Suspension Band Made of galvanized perforated steel with assorted hole, which, according to the tape selected, allow fixing of threaded rods, threaded clamp, bolts, etc. The small hole can be used with rivets, screw or nails. Type SizeSU20 --- 20mm*25m

Flexible Connector•Made of metal and fire-retardent fabirc with PVC

or silicone coating•Help to prevent transmission of vibration and noise

between air treatment group and a ductwork•Temperature range from -30°C to +200°C ac-

cording to different fabric usedStandard SizeMetal Fabric Metal45mm 70mm 45mm70mm 100mm 70mm

Flexible Connector

THICKNESS

ID 3/8” 1/2” 1”

mm (Inch) pcs/ctn pcs/ctn pcs/ctn

10 (3/8) 120 120 30

13 (1/2) 100 100 28

16 (5/8) 90 90 24

19 (3/4) 72 72 20

22 (7/8) 65 65 20

25 (1) 49 49 18

28 (1 1/8) 49 49 18

32 (1 1/4) 42 42 16

35 (1 3/8) 36 36 15

42 (1 5/8) 30 30 12

48 (1 7/8) 28 28 10

51 (2) 24 24 9

54 (2 1/8) 20 20 9

60 (2 3/8) 20 20 9

67 (2 5/8) 18 18 8

73 (2 7/8) 18 18 8

76 (3) 18 18 8

79 (3 1/8) 15 15 6

89 (3 1/8) 15 15 6

12

MODEL A B C PESO

GS 800 400 400 120 kg

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

Ground Brackets GS

MODEL A B C D PESO

RS 750 850 600 260-450 100 kg

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

Roof Brackets RS

RS 750 850 600 260-450 100 kg

Wall Brackets For Outdoor Units SP

MODEL A B PESO

SP-400 400 390 110 kg

SP-450 450 390 120 kg

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

MODEL A B PESO

SP-430 430 390 110 kg

SP-550 550 490 170 kg

MODEL A B C PESO

HA-360 360 400 800 80 kg

HA-450 450 500 1000 80 kg

HA-500 500 500 1000 120 kg

HA-550 550 500 1000 140 kg

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

MODEL A B

SPW-400 400 390

SPW-430 430 390

SPW-450 450 390

SPW--550 550 490

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

Wall Brackets For Outdoor Units HA

Wall Brackets For Outdoor Units SPW

GALVANIZE STEEL BRACKETS

13

3/4” PVC 90° ELBOW

FSP1

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

FSP3

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

PLASTIC FLOOR SUPPORT

ACCESORIES FOR BRACKETS

ANTI-VIBRACION ACCESORIOS AV18 rubber feet + 4 screws + nuts + washers

FIXING KIT FS34 nogs + M10/M8 screws + washers

DRAIN HOSE (50 m ROLLS)* Made from PP (polypropileno)

3/4” RIGID PVC DRAIN TUBING(2 METERS LENGHT)

14

70

70

435

110

435

110

70

70

435

110

435

110

EMBEDDED PRE-INSTALLATION BOXRegistros de PVC para Instalación de Minisplit

Horizontal outlet EB-H

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

CLOSED EB-C

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

UNIVERSAL MINISPLIT REMOTE CONTROL *Big volume, stores of Air-conditioner remote control.*Code memory function, once set up, use it for ever.*Perfect timer and clock function.*CARRIER, CHUILAN DAIKIN, FEDDERS, FUJITSU, GREE, HAIR, HITACHI,KELON, LG, MIDEA, NATIONAL,SAMSUNG, SANYO, TOSHIBA, YORK...

MOD KT-208MOD KT-508

15

Canaletas y Accesorios de PVC para Tuberias de Aires Acondicionados

GG SYSTEM

*Made of galvanize steel cheet*Highly weather proof white powder-coated surface*Made of galvanize steel cheet*Highly weather proof white powder-coated surface

Duct

MODEL A B LENGHT

GG-1 62 57 2M

GG-2 75 62 2M

GG-3 100 70 2M

MODEL A B C D E

QG-1 69 62 89 200 75

QG-2 94 68 110 210 75

QG-3 110 74 128 228 80

MODEL A B C

PW-1 69 62 100

PW-2 83 69 134

PW-3 102.5 74 154

MODEL A B C

CW-1 66 63 97

CW-2 81 67 100

CW-3 106 75 117

C

D

A

A

C

A

B C

B

B

EC

D

A

A

C

A

B C

B

B

E

C

D

A

A

C

A

B C

B

B

E

C

D

A

A

C

A

B C

B

B

E

16

Join

MODEL A B C

ZL-1 71 62 50

ZL-2 85 67 50

ZL-3 109 75 66

End Cover

MODEL A B C

WJ-1 25 70 67

WJ-2 45 95 67

Flexible Joint

MODEL A B C D

LR-1 45 74 66 500

LR-2 50 89 74 600

Ceiling Cap

MODEL A B C

QD-1 95 125 95

T-type Joint / Reducer Joint

MODEL A B C

ST-3 110 75 232

MODEL A1 B1 C1

BJ3-2 33 69 88

MODEL A2 B2 C2

BJ3-1 33 60 72

17

MODEL 2VP-0.5B 2VP-1B 2VP-2B 2VP-3B

Voltage 220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate

Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP

Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare

1/4” Flare3/8” Flare

Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg

2VP Series (2Stage Vacuum Pump)

MODEL VP-1C VP-1.5A VP-2B VP-3B

Voltage 220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate

Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP

Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare

1/4” Flare3/8” Flare

Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg

VP Series (1Stage Vacuum Pump)

ITEM NO. SVP-3025 SVP-5045 SVP-8065

Voltage 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz

Flow CFM 3 2.5 5 4.5 8.0 6.5Rate 1/min 84 72 142 128 226 184

Ultimate Pa 5 5 5Vacuum Mbar 0.05 0.05 0.05

Stage 1 1 1Power 1/4 HP 1/3 HP 1/2 HP

Inlet Port 1/4” Flare 1/4”&3/8’’ Flare 1/4”&3/8’’ FlareOil Capacity 250ml 350ml 320mlDimensions 290x124x225 322x124x235 344x138x248

Weight 6.8kg 8.2kg 12kg

Svp Series (1stage)

Vacuum Pump Oil

VACUUM PUMP

18

MODEL 2VP-0.5B 2VP-1B 2VP-2B 2VP-3B

Voltage 220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate

Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP

Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare

1/4” Flare3/8” Flare

Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg

2VP Series (2Stage Vacuum Pump)

MODEL VP-1C VP-1.5A VP-2B VP-3B

Voltage 220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

220V50Hz

110V60Hz

Free Air CFM 1.3 1.5 2.0 2.5 3.5 4.5 6.5 8.5DisplacementUltimate

Pa 10 10 10 10VacuumMotor 1/4 HP 1/4 HP 1/3 HP 1/3 HP

Intake Fitting 1/4” Flare 1/4” Flare 1/4” Flare3/8” Flare

1/4” Flare3/8” Flare

Oil Capacity 220ml 220ml 250ml 600mlDimensions 290x110x240(mm) 315x120x240(mm)336x123x255(mm)385x140x280(mm)Net Weight 7.0kg 8kg 10.5kg 20.5kg

VP Series (1Stage Vacuum Pump)

ITEM NO. SVP-3025 SVP-5045 SVP-8065

Voltage 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz 110V/60Hz 220V/50Hz

Flow CFM 3 2.5 5 4.5 8.0 6.5Rate 1/min 84 72 142 128 226 184

Ultimate Pa 5 5 5Vacuum Mbar 0.05 0.05 0.05

Stage 1 1 1Power 1/4 HP 1/3 HP 1/2 HP

Inlet Port 1/4” Flare 1/4”&3/8’’ Flare 1/4”&3/8’’ FlareOil Capacity 250ml 350ml 320mlDimensions 290x124x225 322x124x235 344x138x248

Weight 6.8kg 8.2kg 12kg

Svp Series (1stage)

Metallized Film Run Capacitors

Rated Cap. Dimensions

MFD mmxmmxmm

3 31.5x31.5x605 31.5x31.5x60

7.5 31.5x31.5x8010 31.5x31.5x80

12.5 31.5x31.5x8015 31.5x31.5x8020 45.5x71.5x95

20+5 45.5x71.5x9525 45.5x71.5x95

25+5 45.5x71.5x9530 45.5x71.5x95

30+5 45.5x71.5x9535 45.5x71.5x95

35+5 45.5x71.5x9540 45.5x71.5x95

40+5 45.5x71.5x11045 45.5x71.5x110

45+5 45.5x71.5x11050 45.5x71.5x110

Oval Type-CBB66Rated Votage 370V(AC)

Rated Cap. Dimensions

MFD O.D. Height

5 40 707.5 40 7010 40 70

12.5 40 7015 40 7020 40 85

20+5 50 90

25 40 10525+5 50 90

30 45 9030+5 55 90

35 50 10535+5 55 100

40 45 10540+5 60 100

45 50 10545+5 60 100

50 50 10555 50 11560 50 11565 60 11570 55 115

Round Type-CBB65Rated Votage 370V(AC)

Rated Cap. Dimensions

MFD O.D. Height

10 40 8015 40 9025 40 10530 50 10535 50 10540 50 11545 50 115

45+5 60 11550 50 13055 50 130

55+5 55 130

Round Type-CBB65Rated Votage 440V(AC)

Round Motor Start Capacitor

Cap. Dimensions

MFD O.D. Height mmxmm

88-108 1 7/16 2 3/4 36.5x69.8108-130 1 7/16 2 3/4 36.5x69.8124-149 1 7/16 2 3/4 36.5x69.8130-156 1 7/16 2 3/4 36.5x69.8145-175 1 7/16 2 3/4 36.5x69.8161-193 1 7/16 2 3/4 36.5x69.8189-227 1 7/16 2 3/4 36.5x69.8216-259 1 7/16 2 3/8 36.5x85.7233-280 1 7/16 2 3/8 36.5x85.7243-292 1 7/16 2 3/8 36.5x85.7270-324 1 13/16 2 3/8 46x85.7324-388 1 13/16 2 3/8 46x85.7340-408 1 13/16 2 3/8 46x85.7378-454 1 13/16 2 3/8 46x85.7400-480 1 13/16 4 3/8 46x111430-516 1 13/16 4 3/8 46x111460-552 1 13/16 4 3/8 46x111540-648 1 13/16 4 3/8 46x111590-708 2 1/16 4 3/8 52x111645-774 2 1/16 4 3/8 52x110708-850 2 1/16 4 3/8 52x110720-864 2 1/16 4 3/8 52x110829-995 2 1/16 4 3/8 52x110

110/125VAC

Cap. Dimensions

MFD O.D. Height mmxmm

88-108 1 13/16 2 3/8 46x85.7108-130 1 13/16 2 3/8 46x85.7124-149 1 13/16 2 3/8 46x85.7130-156 1 13/16 2 3/8 46x85.7145-175 1 13/16 4 3/8 46x111161-193 1 13/16 4 3/8 46x111189-227 1 13/16 4 3/8 46x111216-259 2 1/16 4 3/8 52x111233-280 2 1/16 4 3/8 52x111243-292 2 1/16 4 3/8 52x111270-324 2 1/16 4 3/8 52x111340-408 2 1/16 4 3/8 52x111378-454 2 1/16 4 3/8 52x111440-480 2 1/16 4 3/8 52x111

220/250VAC

Cap. Dimensions

MFD O.D. Height mmxmm

72-86 1 13/16 4 3/8 46x11188-108 2 1/16 4 3/8 52x111

108-130 2 1/16 4 3/8 52x111124-149 2 1/16 4 3/8 52x111130-156 2 1/16 4 3/8 52x111145-175 2 1/16 4 3/8 52x111161-193 2 1/16 4 3/8 52x111189-227 2 1/16 4 3/8 52x111

330VAC

18

19

Defrost Compressor Frequent Size

Voltage Capacitor µxH(mm)

330V 64µF 38x100

330V 80µF 38x100

330V 100µF 38x100

RCO Series Relay, Overload & Start Capacitor

Part. No. Gemline Robertshaw H.P. Voltage

RC0410 HS410 600-410 1/4,1/3 115V

RC0810 HS810 600-810 1/12,thru 1/5 115V

Relay and Hard Start Capacitor

Part. No. OperatingVoltage (V)

EquipmentRange (HP)

RecomenentRange (HP)

Capacitor(µF)

SPP4E 90-130 1/12 to 1 1/8 to 1 88-106

SPP5E 90-277 1/12 to 10 1/3 to 2 43-52

SPP6E 90-277 1/12 to 10 1/2 to 3 88-106

SPP7E 90-277 1/12 to 10 1 to 4 130-156

SPP8E 90-277 1/12 to 10 1 to 5 189-227

2-Pole Switching Relays

Part No. 2pno Coil Votage

90-340 24-11090-341 110 / 12090-342 208 / 240

CONTACT RATING POWER

120V 208V / 250VFull Load Amps 12 6

Resistive Amps (277 VAC) 15 15Inrush Amps 60 35Horsepower 1/2 1/2

Relay and Hard Start Capacitor

Part No. INCREASED TORQUE

SPP5 300% (270 oz.in.)

SPP6 500% (390 oz.in.)

SPP8 690% (520 oz.in.)

Hard Start Kits

Part. No. Voltage H.P. Capacitor

HS600 115-277V 1/2-5 43-52µF

HS650 115-277V 1/2-10 130-156µF

QD Series Overload Protector

Part. No. Horsepower(H.P.)

Break Time(S)

Temperature(°C)

QD-18 1/8 7-15 25±2QD-16 1/6 7-15 25±2QD-15 1/5 7-15 25±2QD-14 1/4 7-15 25±2QD-13 1/3 7-15 25±2

ICG Series Relay

Part. No. Voltage(V)

Horsepower(H.P.)

ICG-1 115 1/12 thru 1/2ICG-220 230 1/12 thru 1/2

IC Series Solid State Relay

Part. No. Voltage(V)

PTC Resistence(Ω)

IC-1 110 5±20%IC-2 220 22±20%IC-3 220 22±20%IC-4 220 22±20%

SPP Startet Pow-R-Pak

Part. No. Voltage (V) Increased Torque

SPP 115-230 210 Ounce Inches

Part. Continuo Coil Pick-Up (V) Drop-out (V) SUPCO

No. Voltage (V) Min. Max Max. MODEL

SE-63 170 139 153 55 9063SE-64 395 260 275 120 9064SE-65 332 168 182 90 9065SE-66 395 215 225 120 9066SE-67 420 295 315 125 9067SE-68 502 325 345 135 9068SE-69 336 180 195 105 9069

SE Series Potential Relay

Part. No. Pick-Up Cur-rent (A)

Drop-out Current (A)

Horsepower(H.P.)

RP-18 3.15 2.5 1/8RP-16 3.75 3 1/6RP15 4.75 3.75 1/5RP-14 5.35 4.25 1/4RP13 6 5.2 1/3RP12 8.4 7 1/2

RP Series Push-on type relay

Part. No. Resistence (�)

Voltage (V)

Current(A)

PP1100-1 5 110 4PP1100-2 22 220 6

PP1100 Series

Part. No. Voltage (V)

Horsepower(H.P.)

PO115 115 1/12 thru 1/2PO230 230 1/12 thru 1/2

PO Series

xH(mm)

RCO Series Relay, Overload & Start Capacitor

Voltage

115V

1/12,thru 1/5 115V

Relay and Hard Start Capacitor

Part. No.

2-Pole Switching Relays

Resistive Amps (277 VAC)

INCREASED TORQUE

300% (270 oz.in.)

500% (390 oz.in.)

690% (520 oz.in.)

Capacitor

43-52µF

130-156µF

Temperature(°C)

25±225±225±225±225±2

Horsepower

1/12 thru 1/21/12 thru 1/2

PTC Resistence

Increased Torque

210 Ounce Inches

Part.

No.

SE-63SE-64SE-65SE-66SE-67SE-68SE-69

SE Series Potential Relay

Part.

RP Series Push-on type relay

Part.

PP1100-1PP1100-2

PP1100 Series

PO Series

Capacitor(µF)

88-106

43-52

88-106

130-156

189-227

208V / 250V

SUPCO

MODEL

9063906490659066906790689069

Horsepower

20

MODEL Cold ON Operating Temperature (°C) Warm OFF Capillary Length

Cold OFF Warm ON (mm)

K50-P1125 -9.5 -18 8.5 - - 1200

K50-P1126 -18 -24.5 -9.5 - - 1200

K50-P1127 5 1.5 12.5 - - 1200

K50-P1272 -17 -27 -12 -20 1200

VF=K50-P1117 -22 30 7 12 1200-2550

ENDS CAPPED

K Series Thermostat

Thermostat F2000

Rating Voltage : 250V 50Hz/60HzAvailable temperature : -35°C~35°CDiferencial : 2°C~10°C

ICA Series

Part. No. Voltage(V)

Frequencuencia(Hz)

Horsepower(H.P.)

ICA-13 120 50/60 1/4,1/3ICA-15 120 50/60 1/8,1/6,1/5ICA-23 240 50/60 1/4,1/3ICA-25 240 50/60 1/8,1/6,1/5

RO Series

Part. No. ReferenciaGemline

Horsepower(H.P.)

Voltage(V)

RO-81 IC-15 1/12 thru 1/5 115

RO-41 IC-13 1/4 y 1/3 115

RO-82 ---- 1/12,1/10 y 1/8 230

RO-62 IC-25 1/6 y 1/5 230

RO-42 IC-23 1/4 y 1/3 230

Part. No. Pick-Up Cur-rent (A)

Drop-out Current (A)

OverloadCurrent (A)

BreakTimedelay

(S)

PW4.5A 3 2.5 6.5 7- -15PW5.5A 3.7 3 7.8 7- -15

PW Series

Part. No. Pick-Up Cur-rent (A)

Drop-out Current (A)

Horsepower(H.P.)

PW-S1 4.25 3.35 1/5PW-S2 4.75 3.75 1/4PW-S3 5.3 4.25 1/3

PW Series

QD-072 Series

18-240 VAC/VDC1.5 Amp.1.5 Amp. inrush.SPST, N.O.Knob-Ajustable delays from0.03 to 10 min. (1.8 to 600sec.)

Especifi caciones

QD-068 Series

18-240 VAC/VDC1.5 Amp.1.5 Amp. inrush.SPST, N.O.Knob-Ajustable delays from0.03 to 10 min. (1.8 to 600sec.)

Especifi caciones

Horsepower(H.P.)

1/4,1/31/8,1/6,1/5

1/4,1/31/8,1/6,1/5

Voltage(V)

115

115

230

230

230

BreakTimedelay

(S)

7- -157- -15

1/41/3

1200-2550

21

TERMOSTATOS

Pro T834C y T834C ThermostastSimple, Effective Control

The T834C, T8034C SUPER TRADELINE®Heating- Cooling Triple Fuel Thermostats.The adjustable heat anticipator setting range of 0.15A to 1.2A and the two jumpers incluided make the T834C and T8034C SUPER TRADELINE® Thermostats applicable to almost all single-stage heating applications. See Table 1 switch make R to Y on a temperature rise for cooling.

Termostatos de Refrigeración T834J, T8034JThe Honeywell Classic

Termostato Quality QTH60Doble Etapa Solo Frio

FEATURES • Program up to two Occupied and two Unoc-

cupied time periods for each daily schedule.• Set diff erent schedules for each day of week.• Temporary temperature overrodes.• Program copy key

Termostato Comercial LENNOX # 60L5901Programable T7300F 2168 TH5110D Termostato No-Programable

El Termostato no programable TH5110D proporciona control electrónico para sistemas de calefacción y enfriamiento de una etapa de 24 VCA o para sistemas de calefacción de 750 mV.

SPECIFICATIONSThermal DataTemperature Range: 50° F to 90° (10° C to 32°C)Differential: Stage 1 Heat -½°F to 1.2 Amps

Electrical DataSwitch Rating: 24 volts A.C. (30 VAC max) Stage 1 Heat - 1 to 1.2 Amps Cooling - .2 to 1.0 AmpsSwitch Action: Sealed Mercury Switches Stage 1 Heat & Cool - SPDTAnticipator Rating: Stage 1 Heat - .1 to 1.2 Amps Adjustable Cooling - 24 volts A.C. fi xed

Los Termostatos de refrigeración T834J y T8034J proporcionan un control de 24 a 30 Vca en sistemas derefrigeración. Un interruptor de mercurio spdt pasa de R aY en aumentos de temperatura para fi nes de refrigeración.Interruptore integrales controlan la operación deREFRIGERACIÓN-APAGADO del sistema y la operaciónde AUTOM-ENCENDIDO del ventilador.

51M32 MERIT®The Lennox Merit® Serie Thermostat 51M32 is a nonprogram-able electronic thermostat that is easy-to use and has large, easy-to-read display and excellent temperature control. The thermostat also includes a programmable fi lter change reminder and a system check indicator. The system check indi-cator will notify the user of the need for equipment service.Thermostat 51M32 is suitable for non-heat pump, single-stage heat/single cool applications that are matched with a gas or electric furnace.

51M37 MERIT®The Lennox Merit® Serie 5/2 day programable electronic thermostat 51M37 provides excellent tem-perature control and a large, easy-to-read display. It includes a programmable fi lter change reminder, anequipment maintenance reminder, and a system check indicator to notify the user when the equip-ment requires service.The 51M32 is suitable for heat pump, 3-stage heat/2-stage cool applications using a gas or electric aux-iliary heat source. An optional outdoor temerature sensor provides auxiliary heat lockout balance point operation, and dual-fuel compatibility.

Termostato 51M32 / 51M37 MERIT®

The T87 Round® is Honeywell´s most recognizable temperature control. It has kept homes comfortable for over 50 years, and its reli-able performance, classic styling, and convenience have made it and industry standard. A model for the visually impaired is an example of Honeywell´s commitment to meeting special nedds. The Round® thermostat provides temperature control for 24 to 27 Vac residential heating, cooling or heating-cooling systes

Table 1 SUPER TRADELINE® Thermostat Models and Specifi cations.

Model Aplication Mounting HeatAnticipation

Switching System Fan

FigureReference

T834C For use in gas or oil-fi red, heat pump or central electric heat systems. a.b.

vertically0.15A to 1.2A HEAT-OFF-

COOL AUTO-ON 3,4T8034C horizontally

22

Defi nites Purpose Contactors

Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase

20FLA-1POLE

2024 240/227 120 30 120 1

120 480 100 30 240 2208/240 600 80 30 ----- -----

277

One Pole

25FLA-1POLE

25

24 240/227 150 35 120 1120 480 125 35 240 2

208/240 600 100 35 ----- -----277

30FLA-1POLE

30

24 240/227 150 40 120 1120 480 125 40 240 2

208/240 600 100 40 ----- -----277

40FLA-1POLE

40

24 240/227 200 50 120 2120 480 160 50 240 3

208/240 600 120 50 ----- -----277

Two Pole Contactos

Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase

20FLA-2POLE

2024 240/227 120 30 120 1

120 480 100 30 240 2208/240 600 80 30 ----- -----

27725FLA-2POLE

25

24 240/227 150 35 120 1120 480 125 35 240 2

208/240 600 100 35 ----- -----277

40FLA-2POLE

40

24 240/227 200 50 120 2120 480 160 50 240 3

208/240 600 120 50 ----- -----277

30FLA-2POLE

30

24 240/227 150 40 120 1120 480 125 40 240 2

208/240 600 100 40 ----- -----277

Three Pole Contactos

Full Load Coil Voltage Line Locked Rotor Resistive Amp. Maximun HPAmp. 50/60 Hz Voltage Amp. Rating Voltage Single Phase Three Phase

20FLA-3POLE

20

24 240/227 120 30 120 1.5 ----120 480 100 30 240/270 3 7.5

208/240 600 80 30 480/600 ---- 7.5277

25FLA-3POLE

25

24 240/227 150 35 120 2 ---120 480 125 35 240/270 5 10

208/240 600 100 35 480/600 --- 15277 --- 20

30FLA-3POLE

30

24 240/227 150 40 120 2 ---120 480 125 40 240/270 5 10

208/240 600 100 40 480/600 --- 15277 --- 20

40FLA3POLE

40

24 240/227 200 50 120 3 ---120 480 160 50 240/270 7.5 10

208/240 600 120 50 480/600 --- 15277 --- 20

23

Emerson # 5461Lennox Catalog# 76N18HP: 1/2, 1/3, 1/4, 1/5, 1/6RPM: 1075/4Volts: 208/230Amps: 3.5Dia: 5.6”

Direct Drive Blower

FIRST CALL MULTI-HORSEPOWER MOTORS

Emerson # 5462Lennox Catalog# 76N19HP: 1/3, 1/4, 1/5, 1/6RPM: 1075/2Volts: 208/230Amps: 2.6Dia: 5.6”

Condenser Fan

Emerson # 5460Lennox Catalog# 76N17HP: 1/2, 1/3, 1/4, 1/5, 1/6RPM: 1075/4Volts: 115Amps: 7.3Dia: 5.6”

Direct Drive Blower

Emerson # 5464Lennox Catalog# X1160HP: 1/2, 1/3, 1/4, 1/5, 1/6Volts: 208/230Amps: 1.9Dia: 5.6”

Condenser FanEmerson # 5465Lennox Catalog# X1161HP: 1/3, 1/4, 1/5, 1/6Volts: 208/230Amps: 3.0Dia: 5.6”

Condenser Fan

Condenser fan motors

Blower motors

LENNOXCAT#

EMERMFG# HP RPM VOLTS CAP MFD AMPS SHAFT N BASE XD SHELL XI TOTAL C

19P97 1860 1/4 1075 208/230 5.0 17 5.0 0.0 4.1 9.6

19P98 1861 1/3 1075 208/230 7.5 2.1 5.0 0.0 4.6 10.1

19P99 1862 1/2 1075 208/230 7.5 2.9 5.0 0.0 5.1 10.6

X2535 1868 3/4 1075 208/230 10.0 4.5 5.0 0.0 4.7 10.3

98N02 1874 1/4 825 208/230 5.0 2 6.0 0.0 4.3 10.9

91X16 1875 1/3 825 208/230 5.0 1.8 6.0 0.0 5.1 11.6

LENNOXCAT#

EMERMFG# HP RPM VOLTS CAP MFD AMPS SHAFT N BASE XD SHELL XI TOTAL C

20P68 1863 1/4 1075/3 115 5.0 3.9 5.0 4.6 4.1 10.1

20P69 1971 1/4 1075/3 208/230 5.0 1.8 5.0 4.6 4.1 10.2

20P70 1864 1/3 1075/3 115 5.0 5.2 5.0 4.9 4.9 10.4

20P03 1972 1/3 1075/3 208/230 5.0 2.4 5.0 4.9 4.3 10.4

20P72 1865 1/2 1075/3 115 5.0 8.9 5.0 5.8 5.1 11.2

20P73 1973 1/2 1075/3 208/230 5.0 4.6 5.0 5.4 4.8 10.9

74N29 8905 3/4 1075/3 208/230 10.0 4.6 4.0 6.0 5.4 10.4

4.6 10.1

5.1 10.6

4.7 10.3

4.3 10.9

5.1 11.6

SHELL XI TOTAL C

10.4

4.3 10.4

5.1 11.2

4.8 10.9

5.4 10.4

24

Electric Transformers

LENNOXCAT# DESCRIPCION

X3664 120/208/240 24 V Multi Mount 40 VA

X3665 120/208/240 24 V Foot Mount 40 VA

13N47 120/208/240 24 V Multi Mount 50 VA

X0133 120/208/240 24 V Multi Mount 50 VA

X3666 230/208/240/480 24 V Foot Mount 75 VA

Compresores Herméticos R-22

TECUMSEH 208/220-1-60 AW65519 1.5 TON AW65524 2 TON AW65530 2.5 TON AW65536 3 TON AW65546 4 TON AW65558 5 TON

COPELAND 208/220-1-60 15M62 2 TON 15M47 3 TON 15M77 4 TON 15M84 5 TON

Model DTP-3 Three Phase

•Digital voltmeter display instantaneous line voltage for all 3 phase pair

•Contactor load side monitor checks for contactor closure

•One button contactor load side voltage measurement•Automatic voltage tester adjusts from 160 to 600 volts•Adjustable response timer (0.1 to 20 sec.) prevents

nuisance tripping•Adjustable delay on break (DOB) timer ( 0 to 720

sec.) prevents rapid re-starts•Adjustable timer (0 to 30 sec.) allows sequencing of

multiple units•Off, Auto, On setting for operation with or without

control inputs•Selectable contactor test. Opens contactor if any one

of 3 circuits fall•Digital display makes for easy viewing and operation•Fault memory records up to 25 fault causes

MOTOR PROTECTOR POWER MONITOR

Model DSP-1 One Phase

•Digital voltmeter display instantaneous line voltage

•Automatic voltage tester adjusts from 90 to 300 volts

•Adjustable response timer (0.1 to 20 sec.) prevents nuisance tripping

•Adjustable delay timer ( 0 to 720 sec.) prevents rapid re-starts

•Digital display makes for easy viewing and operation

25

SADKSeries Liquid Line Filter-Driers(Alco Type)JOINT TYPE: ODF or SAEMaximun working pressure: 4.14 Mpa

SEKSeries Liquid Line Filter-Driers(Alco Type)JOINT TYPE: ODF or SAEMaximun working pressure: 4.14 Mpa

SDML/SDCLSeries Liquid Line Filter-Driers(Danfoss Type)SMDML: core-100% molecular sieves recom-mended for HFC´S with POE and PAG oils.SDCL: core-80% molecular sieves with 20% activitated alumina recommended for HCFC´sand CFC´s with mineral and alkyl benzene oils.JOINT TYPE: ODF or SAEMaximun working pressure: 4.2 Mpa

TYPE D1(in) D2(in) L(in)

D48 1.85 3.78 5.51

H48 1.85 3.78 5.51

H100 2.09 4.80 6.50

D(H) LIQUID LINE BLOCK

Filter Core

TYPE D1(in) D2(in) L(in)

LX48 3.74 5.51 0.79

LX100 4.69 6.54 1.10

LX Suction Line Filter Core

LT Drying Filter Cilinder LT-485T 5/8”, 1 CORE BLOCK

LT-487T 7/8”, 1 CORE BLOCK

LT-489T 1 1/8”, 1 CORE BLOCK

LT-967T 7/8”, 2 CORE BLOCK

LT-969T 1 1/8”, 2 CORE BLOCK

LT-9611T 1 3/8”, 2 CORE BLOCK

TYPE MOLEC. SIEVE FILTER SIZES CONECTIONgr. Φ (mm) I (mm) L (mm) A (mm) B (mm)

± 3 ± 3FD10 10 19 105 225 2.5 6.35

FD15 15 19 125 150 2.5 6.35

FD20 20 24 120 245 2.5 6.35

FD25 25 24 140 265 3.1 6.35

FD30 30 24 150 275 3.1 6.35

FD50 50 30 168 315 3.1 6.34

FILTRO

Filter Drier

Liquido limpiador de Coil

1 lto, Galón y 20 lts

Liquido limpiador de Coil

ón y 20 lts

Filtro Poro FlexUrethane Spray Can

26

TYPE D1(in) D2(in) L(in)

D48 1.85 3.78 5.51

H48 1.85 3.78 5.51

H100 2.09 4.80 6.50

D(H) LIQUID LINE BLOCK

Filter Core

TYPE D1(in) D2(in) L(in)

LX48 3.74 5.51 0.79

LX100 4.69 6.54 1.10

LX Suction Line Filter Core

LT Drying Filter Cilinder LT-485T 5/8”, 1 CORE BLOCK

LT-487T 7/8”, 1 CORE BLOCK

LT-489T 1 1/8”, 1 CORE BLOCK

LT-967T 7/8”, 2 CORE BLOCK

LT-969T 1 1/8”, 2 CORE BLOCK

LT-9611T 1 3/8”, 2 CORE BLOCK

A B

ØC

Series Liquid Line Filter-DriersSADK

TYPECONNECTION LIQUID FLOW CAPACITACITY (KW)

ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)

SADK-032 1/2 2.4 2.0 2.5 1.8 1.8 6.19

1.63SADK-032S 1/2 2.5 2.2 2.6 2.0 1.9 5.38 4.38

SADK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67

SADK-033S 3/8 3.1 2.6 3.5 2.3 2.3 4.06

SADK-052 1/4 7.3 6.0 7.9 5.3 5.2 4.81

2.63SADK-052S 1/4 12.8 10.5 13.9 9.2 9.0 4.44 3.69

SADK-053 3/8 16.2 13.3 17.6 11.7 11.4 5.13

SADK-053S 3/8 23.5 19.3 25.6 17.9 16.6 4.5 3.63

SADK-082 1/4 7.3 6.0 7.9 5.3 5.2 5.63

2.64

SADK-082S 1/4 12.8 10.5 13.9 9.2 9.0 5.25 4.50

SADK-083 3/8 19.2 15.8 20.9 3.9 13.6 5.94

SADK-083S 3/8 26.1 21.5 28.4 18.9 18.5 5.31 4.44

SADK-084 1/2 32.3 26.7 35.3 23.4 22.9 6.19

SADK-084S 1/2 36.5 29.9 39.5 26.2 25.7 5.38 4.38

SADK-162 1/4 10.3 7.6 13.6 6.3 6.2 6.56

2.64

SADK-162S 1/4 15.3 18.3 16.8 11.5 11.3 6.19 5.44

SADK-163 3/8 21.4 17.6 23.3 15.4 15.1 6.88

SADK-163S 3/8 29.0 23.9 31.6 21.0 20.5 6.25 5.25

SADK-164 1/2 42.8 35.2 46.5 30.9 30.2 7.06

SADK-164S 1/2 51.3 42.2 55.8 37.0 36.2 6.31 5.19

SADK-165 5/8 64.2 52.8 69.8 46.3 46.3 7.5

SADK-165S 5/8 64.2 52.8 69.8 46.3 46.3 6.56 5.19

SADK-167S 7/8 70.5 58.0 76.7 50.9 49.8 7.13 5.5

SADK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63

3.15

SADK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13

SADK-304 1/2 49.6 40.8 54.0 35.8 25.0 9.88

SADK-304S 1/2 54.3 44.7 59.1 39.2 38.4 9.06 8.06

SADK-305 5/8 67.6 55.6 63.5 48.8 47.8 10.31

SADK-305S 5/8 72.7 59.8 79.1 52.5 51.4 9.31 8.06

SADK-306 3/4 73 59.8 79.5 52.5 51.8 10.68

SADK-306S 3/8 82.4 67.3 88.3 58.4 57.4 9.68 8.43

SADK-307S 7/8 98.4 81.0 107.0 71.1 69.6 9.88 8.38

SADK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50

SADK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75

3.66

SADK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00

SADK-414S 1/2 63.3 52.2 70.4 43.7 43.1 9.9 8.19

SADK-415 5/8 81.3 66.9 88.5 58.7 57.5 10.44

SADK-415S 5/8 81.3 66.9 88.5 58.7 57.5 9.44 8.19

SADK-417 7/8 100.5 82.7 109.5 72.5 71.0 9.88 8.19

SADK-419 1-1/8 11.6 91.8 121.4 80.5 78.8 10.38 8.56

27

A

SE

K S

ER

IE

SA

DK

SE

RIE

B

ØC

A B

ØC

C S

ER

IE Lar go

Lar go

Socket

Depth

Series Liquid Line Filter-DriersSEK

TYPECONNEC-

TION LIQUID FLOW CAPACITACITY (KW)

ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)

SEKL-032 1/4 2.0 16.1 2.2 1.4 1.4 4.39

1.63SEK-032S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13

SEK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67

SEK-033S 3/8 3.0 2.5 3.3 2.2 2.1 4.06 3.19

SEK-052 1/4 9.0 7.4 9.8 6.5 6.3 4.81

2.64SEK-052S 1/4 13.3 10.9 14.4 9.6 9.4 4.44 3.69

SEK-053 3/8 21.4 17.6 23.3 15.4 15.1 5.13

SEK-053S 3/8 26.5 21.8 28.9 19.1 18.7 4.5 3.36

SEK-082 1/4 8.6 7.0 9.3 6.2 6.0 5.63

2.64

SEK-082S 1/4 13.7 11.3 14.6 9.9 9.7 5.25 4.5

SEK-083 3/8 21.8 18.0 23.7 15.7 15.4 5.94

SEK-083S 3/8 27.4 22.5 29.8 19.8 19.3 5.31 4.44

SEK-084 1/2 10.3 7.6 73.6 6.3 6.2 6.56

SEK-084S 1/2 15.3 13.8 16.8 11.5 11.3 6.19 5.44

SEK-162 1/4 2.8 1.6 2.2 1.4 1.4 4.39

2.64

SEK-162S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13

SEK-163 3/8 22.2 18.3 24.2 16.1 15.7 6.88

SEK-163S 3/8 31.7 26.0 34.8 22.9 22.4 6.25 5.38

SEK-164 1/2 38.5 31.7 41.9 27.8 27.2 7.06

SEK-164S 1/2 49.6 40.8 54.0 35.8 35.1 6.31 5.31

SEK-165 5/8 50.5 41.5 54.0 36.4 35.7 7.5

SEK-165S 5/8 67.2 55.3 73.1 48.5 47.5 6.56 5.31

SEK-167S 7/8 70.0 58.1 76.8 51.0 49.5 7.13 5.63

SEK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63

3.15

SEK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13

SEK-304 1/2 43.6 35.9 47.5 31.5 30.8 9.88

SEK-304S 1/2 54.1 44.7 59.1 39.2 38.4 9.06 8.06

SEK-305 5/8 55.6 45.8 60.5 40.1 39.3 10.31

SEK-305S 5/8 74.0 60.9 80.5 53.4 52.3 9.31 8.06

SEK-306S 3/4 8.24 63.3 88.3 58.4 57.4 9.68 8.43

SEK-307S 7/8 83.4 68.6 90.8 60.2 59.0 9.88 8.38

SEK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50

SEK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75

SEK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00

3.66

SEK-414S 1/2 63.3 50.2 70.4 43.7 43.1 9.19 8.19

SEK-415 5/8 68.5 56.3 74.5 49.4 48.4 10.44

SEK-415S 5/8 78.3 64.4 85.2 56.5 55.3 9.44 8.19

SEK-417S 7/8 106.5 87.6 115.9 76.9 75.3 9.88 8.38

SEK-419S 1-1/8 113.8 93.6 123.8 82.1 80.4 10.38 8.56

3.66SEK-757S 7/8 22.8 18.2 24.1 16.1 15.6 15.43 13.9

SEK-759S 1-1/8 32.7 26.8 35.4 23.7 23.0 15.75 13.63

28

Series Liquid Line Filter-DriersSEK

TYPECONNEC-

TION LIQUID FLOW CAPACITACITY (KW)

ODF SAE R134a R12 R22 R404a R502 A (In) B (In) C (In)

SEKL-032 1/4 2.0 16.1 2.2 1.4 1.4 4.39

1.63SEK-032S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13

SEK-033 3/8 3.0 2.5 3.3 2.2 2.1 4.67

SEK-033S 3/8 3.0 2.5 3.3 2.2 2.1 4.06 3.19

SEK-052 1/4 9.0 7.4 9.8 6.5 6.3 4.81

2.64SEK-052S 1/4 13.3 10.9 14.4 9.6 9.4 4.44 3.69

SEK-053 3/8 21.4 17.6 23.3 15.4 15.1 5.13

SEK-053S 3/8 26.5 21.8 28.9 19.1 18.7 4.5 3.36

SEK-082 1/4 8.6 7.0 9.3 6.2 6.0 5.63

2.64

SEK-082S 1/4 13.7 11.3 14.6 9.9 9.7 5.25 4.5

SEK-083 3/8 21.8 18.0 23.7 15.7 15.4 5.94

SEK-083S 3/8 27.4 22.5 29.8 19.8 19.3 5.31 4.44

SEK-084 1/2 10.3 7.6 73.6 6.3 6.2 6.56

SEK-084S 1/2 15.3 13.8 16.8 11.5 11.3 6.19 5.44

SEK-162 1/4 2.8 1.6 2.2 1.4 1.4 4.39

2.64

SEK-162S 1/4 2.7 2.2 2.9 2.0 1.9 3.83 3.13

SEK-163 3/8 22.2 18.3 24.2 16.1 15.7 6.88

SEK-163S 3/8 31.7 26.0 34.8 22.9 22.4 6.25 5.38

SEK-164 1/2 38.5 31.7 41.9 27.8 27.2 7.06

SEK-164S 1/2 49.6 40.8 54.0 35.8 35.1 6.31 5.31

SEK-165 5/8 50.5 41.5 54.0 36.4 35.7 7.5

SEK-165S 5/8 67.2 55.3 73.1 48.5 47.5 6.56 5.31

SEK-167S 7/8 70.0 58.1 76.8 51.0 49.5 7.13 5.63

SEK-303 3/8 28.4 24.8 30.1 22.0 21.7 9.63

3.15

SEK-303S 3/8 33 26.3 32.5 25.3 24.8 9.00 8.13

SEK-304 1/2 43.6 35.9 47.5 31.5 30.8 9.88

SEK-304S 1/2 54.1 44.7 59.1 39.2 38.4 9.06 8.06

SEK-305 5/8 55.6 45.8 60.5 40.1 39.3 10.31

SEK-305S 5/8 74.0 60.9 80.5 53.4 52.3 9.31 8.06

SEK-306S 3/4 8.24 63.3 88.3 58.4 57.4 9.68 8.43

SEK-307S 7/8 83.4 68.6 90.8 60.2 59.0 9.88 8.38

SEK-309S 1-1/8 109.1 69.8 118.7 78.8 77.1 10.42 8.50

SEK-413 3/8 46.3 33.8 51.5 28.4 27.9 9.75

SEK-414 1/2 63.3 50.2 70.4 43.7 43.1 10.00

3.66

SEK-414S 1/2 63.3 50.2 70.4 43.7 43.1 9.19 8.19

SEK-415 5/8 68.5 56.3 74.5 49.4 48.4 10.44

SEK-415S 5/8 78.3 64.4 85.2 56.5 55.3 9.44 8.19

SEK-417S 7/8 106.5 87.6 115.9 76.9 75.3 9.88 8.38

SEK-419S 1-1/8 113.8 93.6 123.8 82.1 80.4 10.38 8.56

3.66SEK-757S 7/8 22.8 18.2 24.1 16.1 15.6 15.43 13.9

SEK-759S 1-1/8 32.7 26.8 35.4 23.7 23.0 15.75 13.63

A

SE

K S

ER

IE

SA

DK

SE

RIE

B

ØC

A B

ØC

C S

ER

IE Larg o

Larg o

Socket

Depth

Series Liquid Line Filter-DriersSDML/SDCL

TYPE CONNECTION

LIQUID FLOW CAPACITACITY (KW)

R134a R404aR507

R22R407CR410A

R13aR507

R407a R22R407CR410A

DESICCANT (CU. IN)

SDML/SDCL-032 1/4SAE2 1.5 2 15

12

SDML:24

SDCL:19

14.5

113

SDML/SDCL-032S 1/4ODF

SDML/SDCL-033 3/8SAE5 3.5 5.5

SDML/SDCL-033S 3/8ODF

SDML/SDCL-052 1/4SAE 2 1.5 219

14.5

SDML:28.5

SDCL:23

17.5

1355

SDML/SDCL-052S 1/4ODF

SDML/SDCL-053 1/8SAE5 4 5.5

SDML/SDCL-053S 3/8ODF

SDML/SDCL-082 1/4SAE2 1.5 2

27.5

22

SDML:44

SDCL:33.5

27.5

21

8

SDML/SDCL-082S 1/4ODF

SDML/SDCL-083 3/8SAE5.5 4 6

SDML/SDCL-083S 3/8ODF

SDML/SDCL-084 1/2SAE7.5 5.5 8

SDML/SDCL-084S 1/2ODF

SDML/SDCL-162 1/4SAE2 1.5 2

59.5

52

SDML:96

SDCL:80.5

59.5

47.5

16

SDML/SDCL-162S 1/4ODF

SDML/SDCL-163 3/8SAE6 4.5 6.5

SDML/SDCL--163S 3/8ODF

SDML/SDCL-164 1/2SAE8.5 6 9

SDML/SDCL-164S 1/2ODF

SDML/SDCL-165 5/8SAE12 8.5 13.5

SDML/SDCL-165S 5/8ODF

SDML/SDCL-166S 3/4ODF 12 8.5 13.5

SDML/SDCL-167S 3/8ODF 12 8.5 13.5

SDML/SDCL-303 3/8SAE6 4.5 6.5

126

104

SDML:204

SDCL:169

126

97

30

SDML/SDCL-303S 3/8ODF

SDML/SDCL-304 1/2SAE8.5 6 9.5

SDML/SDCL-304S 1/2ODF

SDML/SDCL-305 5/8SAE12.5 9 14

SDML/SDCL-305S 5/8ODF

SDML/SDCL-306S 3/4ODF 16.5 12 18.5

SDML/SDCL-307S 7/8ODF 16.5 12 18.5

SDML/SDCL-309S 1-1/8ODF 17.5 12.5 19

29

”C” Series Liquid Line Filter-Driers

“C”LIQUID

SAE

SERIESLINE TYPE

ODF

CONNECTIONSIZE

(Inches)

VOLUME OFDESICCANT

M2

OVERALL LENGTH(mm)

SOLDER SOCKETDEPTH(mm)

DIAMETEROF BODY

(mm)SAE ODF

C-032 C-032S 1/449

106 97 1044

C-033 C-033S 3/8 119 99 11

C-052 C-052S 1/482

121 106 1062

C-053 C-053S 3/8 132 109 11

C-082 C-082S 1/4

147

143 130 10

67C-083 C-083S 3/8 154 133 11

C-084 C-084S 1/2 160 138 13

C-162 C-162S 1/4

262

159 146 10

76

C-163 C-163S 3/8 171 149 11

C-164 C-164S 1/2 176 152 13

C-165 C-165S 5/8 184 160 16

C-167S 7/8 176 19

C-303 C-303S 3/8

492

246 226 11

76

C-304 C-304S 1/2 251 229 13

C-305 C-306S 5/8 259 235 16

C-30SS 3/8 245 16

C-307S 7/8 249 19

C-309S 1-1/8 248 24

C-413 3/8

672

243

89

C-414 C-414S 1/2 252 230 13

C-415 C-415S 5/8 260 237 16

C-417S 7/8 249 19

C-419S 1-1/8 248 24

C-607S 7/8983

406 1976

C-609S 1-1/8 406 24

A

SEK SERIE

SADK SERIE

B

ØC

AB

ØC

C SERIE

Largo Largo

Socket Depth

30

Tools and Accesories

COLOR

CT-601 Brass testing manifold, with hook, hose holder and two end handwheels. Testing Manifold Set, includes item No CT-601, 3 Pcs Changing Hose and 2 Pcs 2-3/4” dia. Guage.CT-636-G With 3pcs 36” hoses.CT-660-G With 3pcs 60” hoses.CT-672-G With 3pcs 72” hoses.

Manifold

RG-250Low side 30 vacuumto 250psi 1/8”NPTconnection blue color2-3/4” dia Scale forR12, R22, R502, °F,psi, kg/cm2.

Refrigerant Gauge

RG-500High side 0 vacuumto 500psi 1/8”NPTconnection 2-3/4” dia Red color, Scale forR12, R22, R502, °F,psi, kg/cm2.

CH-134LLow side 30 vacuumto 250psi 1/8”NPTconnection 2-3/4” dia,Scale for R134A, °F,psi, kg/cm2.

CH-134HHigh side 0 to 500 psi 1/8”NPT connection2-3/4” dia. Scale forR134A, °F, psi, kg/cm2.

Charging Hose1/4” SAE connection.500PSI/2500PSI.

CT-336RYB 3pcs 36” hoses set.CT-360RYB 3pcs 60” hoses set.CT-372RYB 3pcs 72” hoses set.CT-396RYB 3pcs 96” hoses set.

CT-501 Brass testing manifold, with hook, hose holder and two end handwheels. (with sight glass) Testing Manifold Set, includes item No CT-501, 3 Pcs Changing Hose and 2 Pcs 2-3/4” dia. Guage.CT-536-G With 3pcs 36” hoses.CT-560-G With 3pcs 60” hoses.CT-572-G With 3pcs 72” hoses.

ITEM NO Solder Type

CT-802-04 1/4” Tubo Extendido

CT-802-06 3/8” Tubo Extendido

CT-802-08 1/2” Tubo Extendido

CT-802-10 5/8” Tubo Extendido

Sight Glass

ITEM NO Male Female

CT-802-04 1/4” 1/4”

CT-802-06 3/8” 3/8”

CT-802-08 1/2” 1/2”

CT-802-10 5/8” 5/8”

Sight Glass

Doble FlareITEM NO

TubeO.D.

CT-800-04C 1/4” With Two Nuts

CT-800-06C 3/8” With Two Nuts

CT-800-08C 1/2” With Two Nuts

CT-800-10C 5/8” With Two Nuts

Sight Glass

31

COLOR

ITEM NO Tube Connection thread

AV-1A 1/4” 7/16”

AV-2A 3/8” 5/8”

AV-3A 1/2” 3/4”

AV-4A 5/8” 7/8”

AV-5A 3/4” 1-1/16”

Split A/C Valve

ITEM NO Tube Connection thread

AV-1B 1/4” 7/16”

AV-2B 3/8” 5/8”

AV-3B 1/2” 3/4”

AV-4B 5/8” 7/8”

AV-5B 3/4” 1-1/16”

Split A/C Valve

With 6cm or 10cm Extension copper tube

SU-041/4” O.D.

Access Valve with core remover

CH-339 Can Top Valves for134A

Design for Cans with12mmx1.5mm Thread,10mm outlet connection.

CH-338 Can Top Valves forR12

Design for Cans with12mmx1.5mm Thread,1/4” SAE outlet connection.

CH-340 Can Top Valves

Sustable for any fl at orscrew type cans, 1/4” SAE outlet connection.

CT-S-04-1/4”

CT-S-06-3/8”

CT-S-08-1/2”

CT-S-10-5/8”

CT-S-12-3/4”

Hand Valve Solder

CT-D-04-1/4”

CT-D-06-3/8”

CT-D-08-1/2”

CT-D-10-5/8”

CT-D-12-3/4”

Hand Valve Flare

ITEM NOTube O.D.

InchU-04 1/4U-05 5/16U-06 3/8U-08 1/2U-10 5/8U-12 3/4

Union

ITEM NOTube O.D.

InchU-04 1/4U-06 3/8U-08 1/2U-10 5/8U-12 3/4

Forged Brass Nut

ITEM NOTube O.D.

Inch

FSU-04x04 1/4FSU-06x06 3/8FSU-08x08 1/2FSU-10x10 5/8

Forged to Solder Union

ITEM NOTube O.D.

Inch

UT-04 1/4UT-06 3/8UT-08 1/2UT-10 5/8UT-12 3/4

Union Tee

ITEM NOTube O.D.

Inch

UE-04 1/4UE-06 3/8UE-08 1/2UE-10 5/8

Union Elbow

3232

COLOR

CT-275LFlares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.and two end hand-wheels.

Tubing Tool Kits

Item No. OutsedeDiameterof Tubing

in.

NominalSizein.

Radius toCenterof Tube

in.CT-364A-04 1/4 1/8 9/16CT-364A-05 5/16 ------- 1-1/16CT-364A-06 3/8 1/2 1-5/16CT-364A-08 1/2 3/8 1-1/2CT-364A-10 5/8 1/2 2-1/4CT-364A-12 3/4 5/8 3CT-364A-14 7/8 3/4 3CT-364M-04 6 14.2 9/16CT-364M-05 8 17.5 1-1/16CT-364M-06 10 24.0 1-5/16CT-364M-08 12 38.1 1-1/2CT-364M-10 16 57.2 2/1/4CT-364M-12 19 76.2 3CT-364M-14 22 76.2 3

Flaring ToolCT-195Flares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.

CT-102-04 Size 1/4” Length 10”CT-102-05 Size 5/16” Length 10”CT-102-06 Size 3/8” Length 10”CT-102-08 Size 1/2” Length 12”CT-102-10 Size 5/8” Length 14”CT-102-12 Size 3/4” Length 14”

Spring Bender

CT-808 AMCONTENIDO DEL KIT:Flares 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 5/8”, and3/4” O.D.and two end hand-wheels.

CT-95 Swagging PunchesFor 1/4”, 5/16”, 3/8” O.D. Tubing90 degree bent

Tube BenderInch Size Tube Bender

CT-193 Set of 5 Swagging Punhes90 degree bent

CT-274 Tube Cutter90 degree bent

CT-127 Tube Cutter90 degree bent

CT-174 ”BigCT” Tube Cutter90 degree bent

CT-368 3-IN-1For 1/4”, 5/16”, 3/8” O.D. Tubing90 degree bent

CT-369 3-IN-1180 degree bent

CT-208 Inner-Outer Reamer

CT-352 Steel Fin straightener

CT-204 Pinch Off Tool CT-201 Pinch Off Plier 7”

33

ASPAS18 4 ALABS 18” ASPAS20 4 ALABS 20” ASPAS22 4 ALABS 22” ASPAS24 4 ALABS 24”

Condenser Fan Blades

Núcleo 1/2”

SS AWS A5.8 Ag Cu Zn Ni Sn Otros SOLIDOS °F °C

LIQUIDOS °F °C

FLUIDITY RATING**

SS 0 BCuP-2 92.9 7.1P 1310-710 1475-802 5

SS 5 BCuP-3 5 89.0 6.0P 1190-643 1500-816 3

SS 15 BCuP-5 15 80.0 5.0P 1190-643 1480-804 3

SS 25 25 43 30 2 1270-688 1435-779 5

High Pressure & Low Pressure Quick Coupler

Silver Solder Flux

Standard Packing

Silver SolderSoldering Alloys

QC-SML4QC-SM

QC-SMH441/4” SAE

QC-12LQC-12

QC-12H1/4” SAE

34

SUNISO GS

SUNISO GS oils are premiun quality oils expressly designed for use as refrigeration compressor lubri-cants.

• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.

• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.

• SUNISO GS Oil are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability and giving long trouble free service life in the refrgiration system using above refrigerants. In addintion, SUNISO GS oils also perform excellently with natural refrigerants such as R-717, R-600a and R-290.

Chemicala StabilityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 1Thermal StabilityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 2Low Wax ContentTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability

3Low Pour PintTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 4High Dialectreic StrengthTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 5Proper ViscosityTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability To resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 6No ContaminationTo resist are miscible well with HCFFC and CFC refrigerants suchas R-22, R-502 and R-12 while featuring excellent stability 7

Property SUNISO 3GS SUNISO 4GS SUNISO 5GS

Density 15°C g/cm3 0.909 .0915 0.921Viscosity 100°C mm2/s 4.31 5.97 7.78Pour Point °C 0.01 0.01 0.01Floc Point °C -53 -46 -35

TYPICAL DATA• Floc Test 3 GS at -50˚C Refrigerant : R-12

SUNISO GS Oils don`t precipitate wax deposit in an extremely low temperature section of the system such as valve or evaporator.

• Pour Point 3 GS at -40˚C

SUNISO GS Oils are featuring outstanding fl uifi ty a low temperature condition resulting good oil returning in the refrigeration systems

REFRIGERATION OILS