RetroXTLP Bolt-On

RetroXTLP Drop-In

Low Pro�le Side Bearing Setup Height Measurement ChartRetroXT 900 Commerce Drive, Suite 906

Moon Township, PA 15108Sales: (412) 424-0560Fax: (412) 4247-0014

sales@stucki.comwww.stucki.com

Rev 1

-201

4Fo

r mor

e in

form

atio

n, re

fer t

o th

e A

.Stu

cki P

rodu

ct G

uide

RetroXTLPC DROP-IN

TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT base on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time

REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION

REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION

TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT LP Bolt-On cage on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time

TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT LPC NOTCH in the base on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time

REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION