A Stucki Height Setup Measurement ChartRetroXT LP Bolt-On RetroXT LP Drop-In Low Pro˜le Side...
Transcript of A Stucki Height Setup Measurement ChartRetroXT LP Bolt-On RetroXT LP Drop-In Low Pro˜le Side...
RetroXTLP Bolt-On
RetroXTLP Drop-In
Low Pro�le Side Bearing Setup Height Measurement ChartRetroXT 900 Commerce Drive, Suite 906
Moon Township, PA 15108Sales: (412) 424-0560Fax: (412) 4247-0014
Rev 1
-201
4Fo
r mor
e in
form
atio
n, re
fer t
o th
e A
.Stu
cki P
rodu
ct G
uide
RetroXTLPC DROP-IN
TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT base on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time
REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION
REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION
TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT LP Bolt-On cage on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time
TAKE SETUP HEIGHT MEASUREMENTS between the bottom of the body side bearing (wear plate) and the top of the RetroXT LPC NOTCH in the base on straight and level track when car is empty when there is positive centerplate contact ONLY relubricate a side bearing in service if both the metal cap and body side bearing have been replaced at the same time
REFER TO RULE 62 OF THE AAR FIELD MANUAL FOR ADDITIONAL SIDE BEARING INFORMATION