A Brief Tutorial on IEEE 802.11n

Post on 16-Apr-2015

115 views 4 download

description

A Brief Tutorial on IEEE 802.11n

Transcript of A Brief Tutorial on IEEE 802.11n

www.airtightnetworks.net

A Brief Tutorial on IEEE 802.11n

��������������� ��� �� � � �����

� �� � �� ���� �� � ���

AirTight Networks

Outline

���� � � �� ��� �� � � � �� ! � ! � � ������� � " ���� ������ �� � �� � ��

� � � �� # �# $ �� � �� � ��%�� ���� &�' ���� �%�(��) ��� � � � ���� �%�(��) �

(� � ) ���%�� � (� � ) ���

� � � � * � � � � ������ ��(��� ��� ���(� � �+ � ���� � � � �%�� � ! �� �� &��� �

, ������������� � ��&�� �&&�� $ � �� � ! �-

� ������������������� �������� �������������������������

������ ��������������

� � ��������� ����� ��������� ����� � ��������� ��

AirTight Networks

IEEE 802.11

, � ����� �� � � �� � ����&��� � ���� . . �

/ ���������� �� � ���� . . 0 �1�&� �� " � � �" ������ � 23

� � �� ������� 4 �� 5 ' �����

� � ����������� �6 %�/ 5 %��7

� !����� �* # � 8* �

� � �� ���� �# �� �

AirTight Networks

802.11 protocol suite

AirTight Networks

802.11 MAC and PHY enhancements

PhysicalPMD

PLCP

MACData link802.11e802.11i

802.11n

802.11n

802.11w

Security QoS

Capacity & Coverage

AirTight Networks

Two-slide primer on 802.11 MAC (1)

6 ���� ���� � �� � � � � ������ ��(��� ��� ��16 * / 3������ �� �� � � � �� �� �

) �&��� & ��� � ���1* # � 8* � 3

AirTight Networks

Two-slide primer on 802.11 MAC (2)

AirTight Networks

Example of DCF CSMA/CA (1)

AirTight Networks

Example of DCF CSMA/CA (2)

AirTight Networks

Example of DCF CSMA/CA (3)

AirTight Networks

Example of DCF CSMA/CA (4)

AirTight Networks

Example of DCF CSMA/CA (5)

AirTight Networks

Example of DCF CSMA/CA (6)

AirTight Networks

Example of DCF CSMA/CA (7)

AirTight Networks

Motivation for multicarrier modulation

9 �� � �� &�" ��� � �� �1� � ��� �) �&��� ����� � � ��� �3�� ���� ��� �

��� ��(�� ������� � :�" ) �� &���� � ( � �� �1��3

� " � �� � �

� #������$ ���������% �& ����� ��

AirTight Networks

Multicarrier modulation

6 �! �� ������ �:��� �� ; � �� �� (��" ) �� &������ �� ! ��&�&� � :��� �

� ; � �� �

� ' ��& ���� ����() *+& �������� , �

� ����) ���&� � :��� ��" ) �� &����) �&��� � ��&" �� ! � �) �&��� & ����:

� ���� &��� � ����� �� � � ��

� ) ���& ���- ���" ����% ���������& ������������- ��& ���- ���" .*

AirTight Networks

Orthogonal frequency division multiplexing (OFDM)

� �� �� � �� �� ���� �� (����� �� � � ������������ ���� ��&�/ 6 #

��� �� � � ����� �� � ��� � � ��&��� � ���& �� ) � � �&���� �

� ' � ����, /���������.) *

AirTight Networks

OFDM in 802.11

< �� ��� � �# 5 ' �� ���� &�� �! �� � ����� �= � ����� �� � � ��

� " ���- ������0 �0 1 2 ������������� ����������

��� �� � � ����� �� � �> � = ��5 '

� 3 � ��& �� �� ��� ��� ����������

� 3 � �����& �� �� ��� ����� ��,

AirTight Networks

802.11n PHY Enhancements

AirTight Networks

What is MIMO?

�$ ����� & ���� ���1�����) ��3���� & �$ ��� ���1� � �! 3

# �# $ ��# �&��� & ���� ���# �&��� & �$ ��� ��

� ' � ������% � ���( ������ ��� ����% � +

� ' � ��������� ��$ ��,

Tx Rx

RxTx

# �? �� ��" �� ) 1� �@ %�# @ 3

AirTight Networks

Spatial diversity

9 � � �� � � ����&��" �� (���� � �� ���(�� ��� ���� ��&�� ������� ���) �&��� � ��&" �

? � � � �� �� � �(�� �

A � �) �&��� & ���� � �� ��&" �(�� ��� ���� ��&�� ������� �� � �� ��� � � � � � �

�� � ����&��"

� � �) �&��� & ���� ������� �� � ���((�� � ��&" ��� �� ��1B �C8� 3

AirTight Networks

Receiver diversity

9 ���� �� ���� �� ����� ����D�N0 * � ) ��� � �� ��� ���� 7 ��� D

x x x x

r1ej�1s(t) r2ej�2s(t) r3ej�3s(t) rMej�Ms(t)

a1e-j�1 a2e-j�2 a3e-j�3 aNe-j�M

Combiner Output SNR = ��

=

=M

1k

2k0

M

1k

2kk

aN

)ra(

AirTight Networks

Receiver diversity: Selection combining

* �� � � ��� ������ ��� ������ ���� � ���� 7

�� = �k =

� 4 ������ �������������, �� ����% � ���- ��������������������

& ����

� " ������������, �� �����5 ����% ������(' 6' 4 +

k

2k

Nr

RadioDSP

Tx

Bit stream Bit streamRadio DSP

Rx

AirTight Networks

Receiver diversity: Maximum Ratio Combining (MRC)

� �! ���� � � �� �� ������ ������ � ��� ������� ��� 7 ���� �&� � � �� �� ����

�� ������ � ��� ����&� � �� 7

Radio

DSP

Tx

Bit stream Bit streamRadio

DSP

Rx

Radio Radio

AirTight Networks

Receiver diversity: Maximum ratio combining

$ � ��) �&�� �� ����� D�

rk ����� � � �� " �� � ��" ) �� &�D

� � �%�� 7 �D�

* � ) ��� � �� � �! � �� 7 ��� D

� � ��" �� �����# :(� &� ���� � �� ����� 7 �! ��������$ ��" �� )

0

k

NE

0

k

NME

0

k

Nr

kE

AirTight Networks

Transmitter diversity: Channel-aware

� ����) ��� � �������� � & � � �� (�� ���� &����� ���(� � ) ���� ��1* �3

� � ���& ��7 � �� ����% �

� !�������������� ���� ����

�) �&�� ��� �� � �! � �� �! ����" �� ����� � � � ���� � ) ������ %� � %�# 7 *

� !���, �- ��, ���������& ��������� �����, ������������������

AirTight Networks

Transmitter diversity: Channel-unaware

� �� :��) ��&� � ��� � � ��1� E * 3��� &�) � ������ � )

� !������������, ������������% � - ����& ��� � ����

� ) ��������& ����� ����� �� ��, �� ����& ��� � ���

� ) �����5��8 �����8 �� ��, ��$ ���& ��� � ���

9 �� �� ����� ������! ���� ���� &�� ����hk = rkej�k

7 � �! � ���� ��&����r(t) =

" ) �� &�� � �! � �� �� ��� �(������" ) �� &�� � �� � �y1 = h1s1 + h2s2

" ) �� &�� � �! � �� � � �� ��" ) �� &�� � �� � �y2 = -h1s2* + h2s1*

)s(t)h (h0.5 21 +

AirTight Networks

Transmitter diversity: Alamouti scheme

9 ��� ; � �� �� (�� � �! � ��" ) �� &��� �� � � � �� � ������! � �� � �

y = [y1 y2*]T

y = = Hs

9 ��z = HHy = HHHs = (|h12| + |h2

2|)I2s� � �

z1 = h1*z1 + h2z2 = (|h12| + |h2

2|)s1

z2 = h2*z1 – h1z2 = (|h12| + |h2

2|)s2

h1 h2

h2* -h1

*

s1

s2

AirTight Networks

Transmitter diversity: Alamouti scheme

7 � �! � �� 7 ��� D�

� � ��" �� ����D�

6 �! ����" �� ����D�� �1F �&�� �� 3

0

k2

22

1

2N|)Eh| |h(| +

AirTight Networks

Practical significance: array gain and diversity gain

/ � � ���7 �" & �� ��� ���� &�� � � � � �� � � ����&��" �1Pe3���

/ � � �# �? �� ��" �� ) % Pe �

# �? �) �) ���� ��" �� ����� �D�# � %�� �! ����" �� ����6 �D�# �

SNR1

DSNR)x (A1

Array gain

Diversity gain

AirTight Networks

Practical significance: array gain and diversity gain

Pe

SNR

AirTight Networks

Spatial multiplexing

# �&��� & ? ���

� ) ���() � +�� �� �����(� � +�����(�� +

� ' � �����, �� ���������� ��������������� ��$ ���

6 � � ��� (�(� � � )

� 9 ������� ��, ��% � �����

� ����) ������; � �� ������� �) ��� ! � �� � ���� �7 / �� �����

AirTight Networks

Spatial multiplexing

# �? �) �) �) �&��� & ? ��� �� ����D�) ���1# %� 3

A � ��������� ��" ) �� &���� � ���) �� �� ���� &�) ��� �? �5

9 �� �� ��" �� ) ���� � � " ����&� � " ��) ���1# %� 3�! �� ���& ��� ����) ���1# %� 3�

; ����� ��

Radio

DSP

Tx

Radio

DSP

RxRadio Radio

Split

b1b2b3b4b5b6

b1 b3 b5

b2 b4 b6

Merge

b1 b3 b5

b2 b4 b6

b1b2b3b4b5b6

AirTight Networks

Spatial multiplexing gain vs. diversity gain trade-off

Div

ersi

ty g

ain

Spatial multiplexing gain

0, MN

1, (M-1)(N-1)

2, (M-2)(N-2)

k, (M-k)(N-k)

Min(M, N), 0

AirTight Networks

802.11n channels

4 � �# 5 ' �� � ����� �

� � ��� ��������� ���������� �(�� � � .��- � +�������

� � ��� ��� ����, ����� �����& ������������ ���� ����

5 �� � � ����� � �� ��%���� � � �� ������� �2�

� �& ���, �� ��� �� ����

$ �&" �� � ��� �:� ! � &�� � ��� �� ���� &����� 4 �� 5 '

� 6�� ���������� ��, ���: #!*�

AirTight Networks

802.11n Modes of OperationPLCP Enhancements

AirTight Networks

802.11n: Modes of Operation

For use of legacy devices also

6 4 ���������� 5#) � �� � � ���� �% ����, �������

���������� ���� � �������� ���

' �, , � ��� ���& ���(��, ���������, � ��7 ��+

!���������� ������������������� ��������

Signalling(See next slide)

> �# � � ���� � �:5 � %�# �? � %�� � �(� &� �1� ������ ���� � ��" ��� �� ��9 * ��� �� ��3

# �? �

� � ������ � � �� ��, ���������

� " ��������� ��� ������- ������� �2

� � � � ��, �������� ����������

� � �(� &�

� *�& ��7 - � ����� ��& ����

� ' �� ; �� ���������� #�� �� ��

� *�� � �� �������, �������� ������% ����

Detection of PPDU,timing & coarse freq acquisition

AirTight Networks

L-SIG (MM) & HT-SIG (MM & GF)Encoded value indicatingDuration of rest of the packet

Always 6 Mbps

L-SIG of Mixed Mode

Refer to next slides

AirTight Networks

Set to a non-zero number, to indicate the difference between the number of space time streams (NSTS ) and the number of spatial streams (NSS) indicated by the MCS.Set to 00 to indicate no STBC (NSTS = NSS)

STBC

Set to 1 to indicate that the PPDU in the data portion of the packet contains an AMPDU otherwise, set to 0.Aggregation

Set to 1Reserved

Set to 0 indicates that PPDU is a Sounding PPDUSet to 1 indicates that the PPDU is not a sounding PPDU

Not Sounding

Set to 1 indicates that channel estimate smoothing is allowedSet to 0 indicates that only per-carrier independent (unsmoothed) channel estimate is recommended

Smoothing

The number of octets of data in the PSDU in the range 0-65535Length

Set to 0 for 20 MHz or 40 MHz upper/lower Set to 1 for 40 MHzCBW 20/40

Index into the MCS table.Modulation and Coding Scheme

Explanation and codingField Name

HT-SIG

AirTight Networks

CRC of bits 0-23 in HT-SIG1 and bits 0-9 in HT-SIG2CRC

Indicates the Number of extension spatial streams (NESS).Set to 0 for no extension spatial streamSet to 1 for 1 extension spatial streamSet to 2 for 2 extension spatial streamsSet to 3 for 3 extension spatial streams

Number of extension spatial streams

Set to 1 to indicate that the short GI is used after the HT training.Set to 0 otherwiseShort GI

Set to 1 for LDPCSet to 0 for BCC

LDPC coding

Explanation and codingField Name

HT-SIG

AirTight Networks

Modulation & Coding Scheme (MCS)

# * ������� � ) � �� ��� � � � ������ ��1��� ? 3���� �� �����

� ��������(" � ' < �= � ' < �= ! ��+

� �����, (�.��>��+

� *��& � ��' � ����' ����(����? �3 +

# * ���� ? �� ���� �(� � ) �� ��� � � 0

� ����� � �'

• MCS 0 to 15 at 20 Mhz (at AP)• MCS 0 to 7 at 20 Mhz (at client STA)

� 9 ������� �����

• MCS 16 to 76 are optional• All MCS at 40 Mhz

� �' @ @ ���@ � � ��� % ���� ��� ����

AirTight Networks

Rate Dependent Parameters (20 MHz and Mandatory MCS)

NSS = 1

NSS = 2

What is the formula?

AirTight Networks

Rate Dependent Parameters (40 Mhz & Mandatory MCS)

NSS = 1

NSS = 2

AirTight Networks

Other Optional MCSs

# * � � ����D>

� �' �0 A �?

� �$ ��( �' �? +

• 216.7 Mbps (20 Mhz)• 450 Mbps (40 Mhz)

# * � � ����D4

� �' �3 A ? �

� �$ ��( �' �? +

• 288.9 Mbps (20 Mhz)• 600 Mbps (40 Mhz)

$ �� � �# * �

� 1 ) � �� �����

• MCS 32• Useful under very high noise• Lowest rate of 40 Mhz (bpsk)• 6.7 Mbps max rate

� �' � - ������ ������������

• Use with – Tx beamforming – STBC

• MCS 33 – 38 (4 SS)– Max rate 495 Mbps

• MCS 39 – 52 (4 SS)– Max rate 495 Mbps

• MCS 53 – 76 (4 SS)– Max rate 495 Mbps

AirTight Networks

MAC Enhancements

AirTight Networks

/ ��) �� � � � � ���� �

AirTight Networks

MPDU

Motivation

� ) � � ��' ��9 * �%�# � * �� ! �� �� ��

* ���� ��) � & ) �� � ����� ! ��&�� �" ��1���� ��� ��� � �� ? �3

�� ��� ���� � � �� �� � ��

# ���) �' ��� ���) � � �� (�� * ��

MPDU1PLCPDCF PLCP ACK MPDU2PLCPDCF PLCP ACK

PLCPDCF PLCP ACK

SIFS

AirTight Networks

Physical Level Aggregation (A-MPDU)

�����������% � �� � � B � ��� ������������ ����% � � 6��������& ���1 ) ' 6C � #�� �����D!, , �, ����E ��� ����% ��� ��7 �

F ��� � � B ��& ����������& � ���

' �& � ���� ����������������� �����- ��& ��� � � B (���� �����, �����������+� F $ ��� �����& � ������� �� �� ������������� ������ ����3 & �����

� ������ � � ������ �(!' �66*+�������� ���% � ��� ��, � � �

� �9 �� ���� ��� % ��������, �������

� : �������% ����� ������ ���& ��������5�, , �, ����� ������7 �� ��� - � �3 & ������ ��� ������ ���� ���- � � B

AirTight Networks

Physical Level Aggregation (A-MPDU)

� � ���� ���, ���������, G!5 � � B � � ���� ���H ��1 ) ��� �& ������6F ���������, �� ���� �$ ���, �(0 3 7 ��������+

� �� � � B �� �� ����,

• 0 indicates no restriction• Else, ranges from 1/4 to 16 usecs• Realized by using Delimiters with MPDU length 0

� ���& �������& �����������, ��!����� ��7 �

F $ ��� ���� ��������!5 � � B ���������� = �' ���� ����

� " ���7 ��7

� " ���7 !�< �� � ����

� !��������, ����� ��������& �� �G!����*�!�< H (��, ���� ���, 6 4 ����+

Max Rx Factor(x): 0 to 3 [2^13+x]Min spacing: 0.25 to 16 usecs

AirTight Networks

A-MSDU

!5 ' � B �������������� ����& � ����

!�� ' � B � � ���������& � ����% ��& ������� ����% �

F ��� ' � B & ����, �������) 6� (= �' �����+

AirTight Networks

A-MSDU

' �� � � �������� ���� ����% � - �������� ���������, ��(��������!5 � � B += �' � �� � � B ���� *� ���!�7 � ������ " ���7 !�7 �, �������� �����- ���� ��!5 ' � B ���& ��� �����= �'

���� ����� � ����" !�������

!5 ' � B ��������������� !I ����5��������������� ' � B �� !�!5 ' � B ���& �) $ �����E��5 ' � B ��������$ � � ��� �� ����% �����

����% �

� 6�� ������������� ��� ' � B � ���& �) $ �% � ��� ��� ����% �������������

!' ) !������� �������!5 ' � B ����������$ ������� �$ ' � B ���, ���� �& ����(��, ��������, �� ����+

AirTight Networks

Block ACK (BA)

AirTight Networks

Block Ack Packet Exchange

� 6 6 E � �7 ; � ����� � ��� �������� �E � �� ���� �

� 6 6 E � �7 �� � �� �� � �(�� ) �8� G � ����� �� ���� ��

/ ��) ��� (���� ���� ��� � �� $ � �� �� ���� � �� � ���! &"� ) ������& ���$ ��- ����� � ������

������

� ) ������& ���� ���% ��- ��� ��7 ��� ����� ������

� ) ������& ����������� ������) I 4 � �

E &� � �� � �7 ; �� � ��� ��� &�� ������E &� � �� * �� �� � �� �(��)

6 < 9 E � ��� � ��� �� � ) ���� ���E � �� ���� �

AirTight Networks

Block ACK Sessions (ADDBA)

* �� � � � " ����E &� � ��� * ����� �� � ��� ������ 6 6 �� ; � ��8� �� � �� 8� & �

6 ��&� � ��� � ������� ) ����� �� (����6 �(� � �� ; 8� �� � ��

����) � � �� ��1� (�� � ����� ? ���&�� 3

� �) � ������ �� �� ���� �� ������ ��1 � � �� �3�(� � �� ��� ����� ���� ������� ��!

������� � � ���� �� �� ��� � �� � ��� �� � �! � ��� � � ����� �� ; � ���� � ��� �

� 6��������� ������� � ��������" ���7 !�<

Request Response

AirTight Networks

Block Ack Parameter Set Field used in ADDBA Action Management Frames

E &� � ��� � � ����) � � �� ��(� &�� ! ' � B ���� �����& �����- ������ � �����" !�������

� " ���7 !�7 � ���������� ��������!�< �� �� �������

• Delayed is sent at a slightly later time after receiving a Block AckReq (See next slide)

� ) 6� ��������������) �����6������� �����(�������6� �����, ��� ���� ���������������� = �' �����+

� " ���� ��2 ���������& ���� �

• Recipient controls the buffers that can be supported

802.11n

802.11e

AirTight Networks

Immediate BlockAck

Delayed BlockAck

AirTight Networks

Block ACK Sessions (DELBA)

6 < 9 E � ��� � ��� �� �� �� � � ��� ���� ��� ? � &�� ��&"

�������� � ���� �� �� ��� � �� � ��� �� �� � �� � �� � �! � �� (�+ � �� ��������

������� � �6 < 9 E �

DELBA Parameter set

AirTight Networks

BlockAckReq (BAR)

802.11n

802.11e

See Next Slide

AirTight Networks

Fields of BlockAckReq Frame

E � 7 �* � ��� � &� " !9 !�< � �����(1 ) 5

�����������+

• Normal ACK• No ACK

� ���5) 6�

• Does BAR consist of req for different QoS streams?

� ���� �����

• Support for ACK for fragments in BA?

� ) 6� J 6*� 4

• Info about each TID

��� � ����� ��� � �� ��E � �� � &�� "

� ������������������; ��������" ��

��E &� � ��� � &�� " �(� &� (!� � " !+

� 6��������������������1 ) ��������

; 1 ) �������� ���������E � 7 �� * ��

�� &�� "

• Negotiated between HT stations as a part of HT capabilities

• Extensions for using BA with 802.11n features such as frame aggregation (A-MPDU)

AirTight Networks

BlockAckReqEncoding

-MT BAR-TID_info contains number of TIDs-BAR info contains seq number for that many TIDs

Per TID INFO

-Basic BAR, Compressed BAR-TID info contains TID for which the . req has been made

BAR Info Field

AirTight Networks

BlockAck frame

E &� � �� � � � �� � � ��� * �� ������) �� �

< ? �� ��(� � ) ���� � �� ��� ���� � �� � � ��� �1� �� ? ���&�� 3

AirTight Networks

BA Information for each BA encoding

Basic BA128 byte bitmap

Compressed BA Mandatory8 bit bitmapNo support for fragments

MTBA (repeatedFor each TID)

AirTight Networks

HT Protection Mechanisms

AirTight Networks

Protection Requirements

-Protection may be required if Non-HT stations are present or Non-greenfield stations are present

-Types of protection that an HT station provides-RTS/CTS using a legacy rate-CTS to self using a legacy rate- Transmit 1st frame in a backward compatible mode

-1st frame Tx using a Non-HT preamble and then switch to HT mode-1st frame Tx using a MM preamble and then switch to Greenfield operation

-Setting of L-SIG values in preamble to protect the current transmission-L-SIG TxOP (See next slide)

AirTight Networks

L-SIG TxOP Protection

������������& �- ����1 ) ' ) !� ����� � � ������� �(�������������1 ) ��� �& ������6F ��� ��+

� �����, ����� ��� ' � B � (��, ��� !) !K !�< �9 ) ' .�) ' +����, ��� , � �� �������� �% ��� ��#5' 6C� #5' 6C � � ����- ���& ��� �% ��� ���� !������ E��� ����% ����

*��51 ) ' ) !� D���7 E ������ ������������% ��% ��, ���, ���� , �� ���L

!� � ����& ���1 ) 5 �$ ������) $ ����

AirTight Networks

HT Parameter NegotiationInformation Elements

AirTight Networks

Advertising HT Capabilities using MAC Frames

HT Capability Information Element (E.g., Beacon, Probe Response)

Refer to next slides

AirTight Networks

Set to 0 if not supportedSet to 1 if supported

Indicates support for the transmission of PPDUs using STBCTx STBC

Set to 0 if not supportedSet to 1 if supported

Indicates Short GI support for the reception of 40 MHz packetsShort GI for 40 MHz

Set to 0 if not supportedSet to 1 if supported

Indicates Short GI support for the reception of 20 MHz packetsShort GI for 20 MHz

Set to 0 if not supportedSet to 1 if supported

Indicates support for the reception of PPDUswith HT Greenfield format.Greenfield

Set to 0 for Static SM Power Save modeSet to 1 for Dynamic SM Power Save modeSet to 3 for SM enabled

The value 2 is reservedIndicates the Spatial Multiplexing (SM) Power Save mode.SM Power Save

Set to 0 if only 20 MHz operation is supportedSet to 1 if both 20 MHz and 40 MHz operation is supported

Indicates which channel widths the STA supportsSupported channel width set

Set to 0 if not supportedSet to 1 if supported

Indicates support for receiving LDPC coded packetsLDPC coding capability

EncodingDefinitionSubfield

HT Capabilities Info

AirTight Networks

Set to 0 for no supportSet to 1 for support of one spatial streamSet to 2 for support of one and two spatial streamsSet to 3 for support of one, two and three spatial streams

Indicates support for the reception of PPDUsusing STBCRx STBC

In Beacon, Measurement Pilot and Probe Response frames:Set to 0 if the BSS does not allow use of DSSS/CCK in 40 MHzSet to 1 if the BSS does allow use of DSSS/CCK in 40 MHzOtherwise:Set to 0 if the STA does not use DSSS/CCK in 40 MHzSet to 1 if the STA uses DSSS/CCK in 40 MHz

Indicates use of DSSS/CCK mode in a 40 MHz capable BSS operating in 20/40 MHz mode. DSSS/CCK Mode in 40 MHz

Set to 0 for 3839 octetsSet to 1 for 7935 octets

Indicates maximum AMSDU length. See 9.7b (A-MSDU operation).Maximum A-MSDU length

Set to 0 if not supportedSet to 1 if supported

Support indicates that the STA is able to accept an ADDBA request for HT-delayed Block Ack

Indicates support for HTdelayed BlockAckoperation.HT-delayed BlockAck

EncodingDefinitionSubfield

HT Capabilities Info

AirTight Networks

EncodingDefinitionSubfield

Set to 0 if not supportedSet to 1 if supported

Indicates support for the LSIG TXOP protection mechanism

L-SIG TXOP protection support

Set to 0 by an AP if the AP allows use of 40 MHz transmissions in neighboring BSSs.Set to 1 by an AP if the AP does not allow use of 40 MHz transmissions in neighboring BSSs.Set to 0 by a STA to indicate to its associated AP that the AP is not required to restrict the use of 40 MHz transmissions within its BSS.Set to 1 by a STA to indicate to its associated AP that the AP is required to restrict the use of 40 MHz transmissions within its BSS.

When sent by an AP, indicates whether other BSSs receiving this information are required to prohibit 40 MHz transmissions.When sent by a STA, indicates whether the AP associated with this STA is required to prohibit 40 MHz transmissions by all members of the BSS. Forty MHz Intolerant

In Beacon, Measurement Pilot and Probe Response frames transmitted by an AP.Set to 0 if the AP does not support PSMP operationSet to 1 if the AP supports PSMP operation

In Beacon frames transmitted by a non-AP STA:Set to 0

Indicates support for PSMP operation. SeePSMP support

HT Capabilities Info

AirTight Networks

Example Packet Trace Snippet of a DlinkAP

5 � �* �� ���&��" ���(� ����H � � � � � � � � � � �

���������������������������� �������������� ������������ ���

������������������������������������� !"� ���#��������������$%&� ��$�'���

������������������(�)���*'����������������� ����������� �

���+��������������'���������������������(���*,,-�.�����/�� !"

������������������ �0�#����� �(1���"���2324�&5���

������������������(������������� ��!�(���5���'���6��6��� �����

���������������������.0��',������ �

������������������ ���#���� ��������������� ��0�',

����������+��������%� ������� ���� !"������� ���

�������������������%� ������� �7�� !"����������� ���

������������������(�)������������&������.����)����(1����%��8�� ��#&��

�������������++����������� �������0��$�9��&���

���������������+��'��%�7� !"������� !"���� �������������� ���

�������������������(�,������$�����&����5����������� ���

AirTight Networks

HT Capabilities IE: Supported MCS Set

7 ? �# * �E ��) �����������D� ���� �� �� ����� � � � ��(� � ������# *

� ? # * � ��6 (�� � �D�� �) ������ ���� ? 87 ? �# * ��� � ; ��&

A � �� 4 �) �? ���� �) ��� ���� ���� � � � � �

� ? �� ; ��&�) � � �&���� ����� � � � ��1���� ��� ��� � � �� &� � 3�) �" �� � �) �" ��� ��� ���� � � � � �

AirTight Networks

HT Extended Capabilities

� �4 �' �� � � �� � ��������$ �������� � ����

� !�� ���& �- ����� ; � � �3 � �2 �� � ����

� !- ����G� ��������5�$ ������H

�' ����& ��7

� ' �������� �% ��� �' ����& ��7

9 � 9 ��� ���� ����������� � � �� 9 �% � ���� ������ �����

� 4 � ��������� �- �� ���������� ��������� ��� ����� ��7 �& � �� ��� ��� ����

, ���! ��� ��� ����" ��) � & ) ������ ���� (��� ���� ! ��� �(��

AirTight Networks

HT Information Element

-Prev IE was about capabilities-This IE is about actual state of BSS at any point of time (more dynamic)-See next slide for more

AirTight Networks

HT Information Element

������� ������ � ���� �

� � ��� ��������

� ' ������ �������������

� �������- ������' ) !(�� � 3 � +

� � ���" �����

• Does AP Tx beacon in secondary channel?

� E ���� �# * � �

• Mandatory MCS for all STAs in BSS

• Similar to Basic rates of .11a/b/g

9 6� '

� ' �� � ��� � ��7 �, �� �

� F �, ��������(���� � ��- ��

�0 ������� ' 6� ' +

) $ & � �����

� " � ���C � � 9 6� ' � ��7 ��

4 % � ��� � ��, " ' ' � ������

� ����) ' � ������

� ' �����) ' �� ' ) " �; ��, ���

' ) !� ��� � ����

� ���" ' ' ��� � � �� #5' 6C ) I 4 �

� ������

-Phased Coexistence (PCO Parameters)-PCO Active-PCO phase (20 or 40 Mhz switch)

AirTight Networks

HT Information elementOperating mode

Non-GF STAs present

-Set to 0 -All STAs in BSS are 20/40 Mhz HT-All STAs in a 20 MHz HT BSS are 20 MhzHT

-Set to 1 (non-member protection)-Some members on the channel (maybe outside BSS) are non-HT

-Set to 2-At least one 20 Mhz only STA in a HT BSS

- Set to 3-MM (at least one legacy STA is present in BSS)

-Set to 0-All associated STAs in BSS are GF stations

-Set to 1-Some non-GF STAs present in a BSS

Protection

-Required for Operating mode 1 & 3

-Protection mechanisms discussed earlier can be used

- Operating mode can also be updated dynamically based on BSS constitution

AirTight Networks

Channel Switch & Extended Channel Switch Elements

* ���� &�� ��� ��� 6���������������� �������� ����% ����� ��� ��������

• Useful for 40 Mhz transmission • 0 indicates no sec channel, 2 is reserved• 1 means secondary is above primary, 3 means below

� " �������� �& �9 ��� �����

� ��������- ��������������� ����(!��������, ����� ����+

< ? � �� � �* ���� &�� ��� �� ' - ���������- ��������� �2 � �� ��� ��������(3 � �2 +���� �, ���� ������

� " �������� �& �9 ��� �����

� ��������- ��������������� ����(!��������, ����� ����+

AirTight Networks

Quick Overview of advanced .11n features Optional and/or not yet available today

AirTight Networks

HTControl

Parameters used for channel measurement procedures and antenna selection

AirTight Networks

When the MAI field is set to the value ASELI, this field is interpreted as defined in Figure n4 (ASELC subfield) and Table n3 (The ASEL Command and ASEL Data parts of the ASELC subfield).Otherwise, this field contains recommended MCS feedback.A value of 127 indicates that no feedback is present.

MCS Feedback and Antenna Selection Command/Data

MFB/ASELC

Set to the received value of MSI contained in the frame to which the MFB information refers.Set to 7 for unsolicited MFB

MFB Sequence IdentifierMFSI

When set to 14, the MAI field contains an Antenna Selection Indication(ASELI).Otherwise the MAI field is interpreted

MCS request or Antenna Selection Indication

MAI

Set to 1 to request the responder to transmit a sounding PPDU.When set to 0, the responder is not requested to transmit a sounding PPDU.

Sounding RequestTRQ

DefinitionMeaningField

HT Control: Link adaptation

AirTight Networks

RDP Exchange

AirTight Networks

Thank you

I��������� ���� %� � � �������J K ��� ��� ��� �� � ���� �