Post on 02-Jun-2018
8/10/2019 942 E InsTrain Wiring Installation Training System
1/78
Installation EngineeringTraining systems / traine rs for e lectrical wiring/building mana geme nt systems:
Protective circuitry, protective measures, building mains feed, lighting and intercom systems
Industrial wiring, intercoms, alarm systems, hazard alarms and access control
KNX/EIB, LON
Project work, technical practice, assembly practice systems, planning software
Lucas Nlle GmbH Page 1/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
2/78
InsTrain wiring installation training system
Lucas Nlle GmbH Page 2/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
3/78
InsTrain wiring installation training system
The InsTrain Multimedia Installation Lab is a computer-based training and experiment system designed for training and further education in installing electrical wiring. InsTrain has been developed jointly by the InsTrainGroup , which includes the following members:
Lucas-NlleBfe Oldenburg
Hager-Tehalit
Dehn&Shne
Gossen-Metrawatt
Busch-Jaeger
WAGO
RutenbeckData Design System
The InsTrain wiring installation training system is a unique, comprehensive experiment hardware system with aninterface and multimedia training programs. It is conceived in such a way so as to integrate cognitive and hands-on training into an overall concept linking together theory and practice and thus allowing specific targeting of handling skills. A host of multimedia courses, starting from the basics and extending up to advanced topics, isavailable for schools, vocational colleges and training of engineers.
Multimedia-based, animated training units lead through the theory and provide instructions for conductingexperiments. This allows trainees to work unsupervised, although the system also allows teachers and trainingstaff the freedom to intervene at any juncture according to the needs of students.
The systems multimedia learning environment and the large proportion of independent learning ensure highlevels of motivation in students and maximise their degree of success in learning the material to guarantee thattopics are learned effectively and efficiently. Access to the multimedia courses along with the control of virtualinstruments and fault simulation is provided by LabSoft, the systems open experimentation platform. Thecourses convey the theoretical background and allow for experiments to be performed using the appropriatehardware for the course. The hardware includes an intelligent interface with a USB port, which provides thecapacity to make high-quality measurements when used in conjunction with the systems integrated virtualinstruments. In addition, the progress of students can be checked by having them identify a variety of simulatedfaults or by means of knowledge tests. All results can be documented electronically.
With the aid of the integrated fault simulation capability, students can be given various exercises in which theycan use typical measuring equipment to trace faults and document their results. The interactive training andexperiment software can be used by students to test their knowledge and it also provides feedback regarding theresults of experiments. All experiments can be undertaken with the fault simulation switched on or off. Bycombining the various simulated faults, a large number of exercises can be devised.
Lucas Nlle GmbH Page 3/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
4/78
8/10/2019 942 E InsTrain Wiring Installation Training System
5/78
8/10/2019 942 E InsTrain Wiring Installation Training System
6/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 6/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
7/78
Pos. Product name Bestell-Nr. Anz.
1 VDE building management: interface, house connection & distr.,fault sim.
SE2671-1M 1
Compact, multi-functional, computer-based training equipment for electrical wiring installation and associated protective measuresTopic: "Building service entry and main distribution box". Allexperiments can be undertaken with fault simulation switched onor off. By combining the various simulated faults, a large number of exercises can be devised.
The hardware is supplemented not only by training software butalso by software for planning electrical wiring installations for complete buildings. Built-in product databases encompassingvarious manufacturers allow for all kinds of plans and lists to begenerated and printed out.
Equipment and functions included
CD-ROM with Labsoft browser and course software
Planning software for planning installations in wholebuildings
Wiring installation training system Building service entryand main distribution box
Fault simulation: 32 simulated faults can be activated
Building distribution box model with measuring socketsEquipotential bonding bar
Water mains pipe
Complete main distribution box for building
Digital electricity meter and mains switch
4 x circuit breakers
RCD
2 x 230V sockets
CEE socket, 400V
Lamp circuit (on-off)
2 x voltmeters, max. 600V
1 x ammeter, max. 10A,
1 x three-channel oscilloscope max. 600V
Interface with USB port
Operating voltage: 3 x 230V/400V/50Hz
Connector: CEE 16A
Dimensions: 1000 x 800 x 220mm
Lucas Nlle GmbH Page 7/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
8/78
Weight: 45kg
Lucas Nlle GmbH Page 8/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
9/78
Measuring instruments:
Lucas Nlle GmbH Page 9/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
10/78
Pos. Product name Bestell-Nr. Anz.
2 Installation tester for protective circuitry according to DINVDE0100,/Part 600
LM8552 1
Its wide-range m easuring equipment allows this tester to be used for measurements on AC and three-phase networks with voltagesranging from 65 up to 500 V and frequencies from 15.4 to 420 Hz.
Loop and mains impedance measurement
Measurement of insulation resistance at nominal voltage withvariable or ris ing test voltage, measurement of very lowresistance
Measurement of earth resistance
On-site insulation meas urement
Universal connector systemDisplay of permitted circuit breaker types for electricalinstallations
Test of operation of electricity meters
Calculation of wire lengths for common copper wiring
Measurement of pre-conducting, leakage and compensatingcurrents up to 1 A as well as operating current
Measurement of rotating field direction (phase sequence,highest chained voltage)
Measurement of contact voltage without using a switch.
Trip testing at nominal current, measurement of trip times
Special testing of systems or RCD circuit breakers
Testing of system s or RCD circuit breakers with ris ingleakage current and display of trip current and contact voltageat instant of tripping.
Testing of RCD circuit breakers under following conditions : IN, 1 IN, 2 IN, 5 IN
Testing of RCD circuit breakers s uitable for pulsating DC withpositive or negative half waves
Testing of RCD circuit breakers with adjus table leakagecurrent for determining contact voltage and trip current
Evaluation software
The Software acquires all the neces sary data for compilingreports in accordance with DIN VDE 0100 part 600
Test reports (ZVEH) can be compiled autom atically
Individually specifiable d istribution s tructures with circuit/RCDdata
Compiled s tructures can be s tored and loaded into the tester as needed
Lucas Nlle GmbH Page 10/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
11/78
The tester can exchange data with a PC in both directions viaa USB link
Data export in EXCEL, CSV and XML formats
Includes
1 Metrawatt test, type Profitest Mbase
1 Earthed plug module (PRO-Schuko)
1 2-pole meas uring adapter
1 Lead for extension to 3-pole adapter (PRO-A3-II)
2 Crocodile clips
1 Strap
1 Set of batteries (8 x LR6)1 Set of brief ins tructions
1 Set of full ins tructions (on CD-ROM)
1 DKD calibration certificate
1 PC Program ETC for comm unication with the testing device.
Lucas Nlle GmbH Page 11/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
12/78
Pos. Product name Bestell-Nr. Anz.
3 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a wide
variety of components (e.g. PC and monitor-holders)4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
Accessories:
Lucas Nlle GmbH Page 12/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
13/78
4 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HU
Usable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
5 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
Lucas Nlle GmbH Page 13/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
14/78
6 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 14/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
15/78
Pos. Product name Bestell-Nr. Anz.
7 Wireless LAN USB device server LM9080 1
USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.
Technical data:
Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 Mbit
Built-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g
Includes:
Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples
Additionally recommended
Lucas Nlle GmbH Page 15/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
16/78
8/10/2019 942 E InsTrain Wiring Installation Training System
17/78
EGT 2 Wiring installation for lighting and appliance circuits
Lucas Nlle GmbH Page 17/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
18/78
EGT 2 Wiring installation for lighting and appliance circuits
The wiring installation training module Lighting and appliance circuits is a project-based multimedia trainingsystem covering the following topics:
Wiring circuits, planning, calculations
Cables, calculation, wiring
Sub-distribution, planning,
VDE conformant safety measures
Different software packages are used to work through the various training stages in a training system that veryclosely follows actual practice. The training software is specially designed for educational use and provideshierarchical, structured guidance to the student. This provides a considerable boost to the self-learning aspect of the system.
The training objectives are structured as follows:Installation of on-off and intermediate circuits
Installation of multi-switch circuits
Installation multi-circuit switches
Installation of circuits with current pulse relays
Dimming fluorescent lamps
Dimming halogen lamps
Installation of a motion sensor for external lighting
Installation of multi-functional comfort switches
Protective measures to prevent electric shocks
Testing RCDs
Insulation measurements, earth measurements, loop resistance
Testing rotating fields, protective earth measurements, equipotential bonding measurements
Lightning and excess voltage protection
Documentation, handover and test report
Lucas Nlle GmbH Page 18/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
19/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 19/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
20/78
Pos. Product name Bestell-Nr. Anz.
9 VDE building management: interface, lighting & appliance wiring,fault sim.
SE2671-1C 1
Compact, multi-functional, computer-based training equipment for electrical wiring installation and associated protective measures onthe topic: Lighting and appliance circuits. The system contentsinclude the overarching topics of wiring ins tallation circuits, planning,cabling, ins tallation of wiring, sub-dis tribution and protectivemeasures conforming to VDE standards . All experiments can beundertaken with fault simulation swi tched on or off. By combining thevarious simulated faults, a large number of exercises can bedevised.
The hardware is s upplem ented not only by training software but alsoby software for planning electrical wiring ins tallations for completebuildings. Built-in product databases encompass ing variousmanufacturers allow for all kinds of plans and lists to be generatedand printed out.
The training objectives are s tructured as follows:
Training projects, overview
Producing various documentation
Training project: Installation of a kitchen according tocustomer order
Training project: Ins tallation of a bathroom after detailedmeetings with customer
Training project: Ins tallation of a hall with job planningTraining project: Ins tallation of a bedroom/nursery accordingto customer order
Training project: Sub-dis tribution with planning andcalculation of costs
Testing of all ins tallations in accordance with DIN VDE 0100part 600
Lightning and excess voltage protection
Documentation, handover and test report
All experiments can be undertaken with fault s imulation switched onor off. By combining the various sim ulated faults, a large number of exercises can devised.
Equipment and functions supplied
CD-ROM with Labsoft browser and course software
Planning software for planning installations in wholebuildings
Wiring installation training system Building service entry andmain distribution box
Fault simulation: 32 simulated faults can be activated
Combined residual current circuit-breaker RCCB, 30 mA
3-pole circuit breaker
6 sin le- ole circuit breakersLucas Nlle GmbH Page 20/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
21/78
Excess voltage protection circuit for electronic equipment
High-sens itivity excess voltage protection circuit for electronicequipment
Current-surge relay
3 x 230V sockets
Appliance s ocket, 400V
4 on-off/change-over switches
Multi-circuit switch
Cross-over switch
2 dimmers
Motion sensors
2 Fluorescent lights with sockets, ballast and starter
1 Compact fluorescent lamp with dimm able ballast module
1 Low voltage halogen lamp with dimmable electronictransformer
1 Multi-function switch with m otion detector
2 x voltmeters , max. 600V
1 x ammeter, max. 10A,
1 x Three-channel oscilloscope max. 600V
Inputs and outputs: 4mm safety sockets
Measuring inputs: 2mm safety sockets
2 x voltmeters , max. 600V
1 x ammeter, max. 10A,
1 x three-channel oscilloscope max. 600V
Interface with USB port
Operating voltage: 3 x 230V/400V/50Hz
Connector: CEE 16A
Dimens ions: 1000 x 800 x 220mm
Weight: 25kg
Lucas Nlle GmbH Page 21/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
22/78
Pos. Product name Bestell-Nr. Anz.
10 Voltage, phase + continuity tester with field direction indicator,max. 400V
LM8554 1
Robus t, safe and eas y-to-use tes t instrument for voltages up to 400V.Tests voltage, phase, polarity and continuity as well as indicating thedirection of a rotating (three-phase) electrical field.
Type PROFISAFE 400
IP 65 model with 9 LEDs
Power supplied by a durable solar cell and rechargeablelithium battery
Voltage ins ulation s trength > 5 kV
VDE-GS tested
Measurement category of instrument CAT IV
Nominal voltage range 12 ... 400 V
Display ranges 12, 24, 50, 120, 230, 400 V
Input resis tance 117 k
Frequency range 0 ... 2000 Hz
Current 3.4 mA
On period 30 s
Continuity testing 0 ... 500k
Measuring instruments:
Lucas Nlle GmbH Page 22/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
23/78
11 Installation tester for protective circuitry according to DINVDE0100,/Part 600
LM8552 1
Its wide-range m easuring equipment allows this tester to be used for measurements on AC and three-phase networks with voltagesranging from 65 up to 500 V and frequencies from 15.4 to 420 Hz.
Loop and mains impedance measurement
Measurement of insulation resistance at nominal voltage withvariable or ris ing test voltage, measurement of very lowresistance
Measurement of earth resistance
On-site insulation meas urement
Universal connector system
Display of permitted circuit breaker types for electricalinstallations
Test of operation of electricity meters
Calculation of wire lengths for common copper wiring
Measurement of pre-conducting, leakage and compensatingcurrents up to 1 A as well as operating current
Measurement of rotating field direction (phase sequence,highest chained voltage)
Measurement of contact voltage without using a switch.
Trip testing at nominal current, measurement of trip times
Special testing of systems or RCD circuit breakers
Testing of system s or RCD circuit breakers with ris ingleakage current and display of trip current and contact voltageat instant of tripping.
Testing of RCD circuit breakers under following conditions : IN, 1 IN, 2 IN, 5 IN
Testing of RCD circuit breakers s uitable for pulsating DC withpositive or negative half waves
Testing of RCD circuit breakers with adjus table leakagecurrent for determining contact voltage and trip current
Evaluation software
The Software acquires all the neces sary data for compilingreports in accordance with DIN VDE 0100 part 600
Test reports (ZVEH) can be compiled autom atically
Individually specifiable d istribution s tructures with circuit/RCD
dataCompiled s tructures can be s tored and loaded into the tester as needed
The tester can exchange data with a PC in both directions via
Lucas Nlle GmbH Page 23/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
24/78
a USB link
Data export in EXCEL, CSV and XML formats
Includes
1 Metrawatt test, type Profitest Mbase
1 Earthed plug module (PRO-Schuko)
1 2-pole meas uring adapter
1 Lead for extension to 3-pole adapter (PRO-A3-II)
2 Crocodile clips
1 Strap
1 Set of batteries (8 x LR6)
1 Set of brief ins tructions
1 Set of full ins tructions (on CD-ROM)
1 DKD calibration certificate
1 PC Program ETC for comm unication with the testing device.
Lucas Nlle GmbH Page 24/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
25/78
Pos. Product name Bestell-Nr. Anz.
12 Set of safety measurement cables, 4mm (23 leads), for Instrain SO5148-1M 1
Safety meas urement leads with stackable 4mm laminated safetyplugs and highly flexible double insulated wires.
Each set includes the following:
8 x 25cm long, black
7 x 50cm long, black
4 x 100cm long, black
1 x 25cm long, blue
4 x 50cm long, blue
3 x 100cm long, blue
2 x 50cm long, green/yellow
2 x 100cm long, green/yellow
1 x 50cm long, red
Wire cross section 2,5 mm 2
Rating: 600V, CAT II, 32A
Accessories:
Lucas Nlle GmbH Page 25/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
26/78
13 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)
4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
14 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HUUsable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
Lucas Nlle GmbH Page 26/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
27/78
15 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
16 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 27/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
28/78
Pos. Product name Bestell-Nr. Anz.
17 Wireless LAN USB device server LM9080 1
USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.
Technical data:
Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)
Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 MbitBuilt-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g
Includes:
Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples
Additionally recommended
Lucas Nlle GmbH Page 28/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
29/78
18 Multi13S digital multimeter LM2330 1
Universal precision lab multimeter and temperature meter with IRinterface for high-quality, universal m easurement and testing ineducational settings, power plants, process control installations etc.
3-digit multimeter; resolution: 3,100 digits
Measurement clas sification CATII-1000V
Can be connected to UniTrain-I system via IR interface
Voltage and current m easuring ranges : 30m V-1000V DC, 3V-1000V AC; 3mA-16A DC; 30m A-10A AC
Resis tance ranges : 30ohm-30Mohm
Special functions: C for temperature measurem ents us ingPT100/1000 thermocouple
Continuity and diode testing
Automatic range s election and battery shut-off, min ./max. anddata hold function
Safety fuse for current measurement range up to 300mA
Protection agains t high currents in the mA range for nominalvoltage of 1000V
Display with bar chart and backlighting
Includes protective sleeve, measuring leads, 1 x spare fuse,9V battery, calibra tion certificate
Lucas Nlle GmbH Page 29/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
30/78
EGT 3 Communication and networks
EGT 3 Communication and networks
The wiring installation training module on networks is a multimedia training project covering the following topics:
Application-neutral communications cabling in conformance with EN 50173-4
Cabling in conformance with EN 50173-4
Infrastructure for disseminating data using Home Office
Sub-distribution from electricity meter panel for multimedia applications
Connectors/cabling (to install yourself), difference between optical fibres, polymer optical fibres andcables
LAN/WLAN applications
Expansions to system (radio, co-ax etc.)
Calculation and installation of aerial/cabling sys tems
Lightning and excess voltage protectionHandover report for installation
Fault simulation
Different software packages are used to work through the various training stages in a training system that veryclosely follows actual practice. The training software is specially designed for educational use and provideshierarchical, structured guidance to the student. This provides a considerable boost to the self-learning aspect of the system.
Lucas Nlle GmbH Page 30/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
31/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 31/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
32/78
Pos. Product name Bestell-Nr. Anz.
19 Building management training kit: interface, networks, fault sim. SE2671-1E 1
The training objectives are organised as follows:
Training projects, overview
Connection of two PCs using a cross-over cable
Making and tes ting a cross -over cable
Installation, wiring and testing of two RJ45 sockets in achannel segment
Networking PCs via RJ 45 sockets (no soldering, screwing or stripping)
Equipping a distributor with NTBA, W-LAN router, etc.
Installation of a patch panel in a multimedia distributor
Making a patch cable
Networking PCs via network switches and patch panels
Networking two PCs via polymer optical fibre (POF)
Configuring a DSL connection
Setting up a W-LAN connection
Inputting a signal via a DVB-T receiver
Installation of lead-through and terminal sockets in a channelsegment (co-ax)
Documentation, handover and test report
All experiments can be undertaken with fault s imulation switched onor off. By combining the various sim ulated faults, a large number of exercises can be devised.
Technical data
Operating voltage: 230/400V/50Hz
Connector: 16A earthed plug
PC connection: USB
Functional elem ents:Multimedia distribution cabinet4-way switch4-port hub2 plug sockets for appliances with protection class IIDSL W-LAN router 2 earthed plug sockets 230VSplitter 2 channel segments
Assembly equipm ent for RJ 45 sockets , Cat 6a2 RJ45/fibre-optic converters
Assembly equipm ent for antenna sockets
Assembly equipm ent for fibre optic/POF
Integrated m easuring ins truments:2 voltmeters, max. 600V1 ammeter, max. 10A1 three-channel oscilloscope, max. 600V
Lucas Nlle GmbH Page 32/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
33/78
Dimens ions: 1000 x 800 x 220mm
Weight: 45kg
Apart from the educational training s oftware, the topic can be
supplemented by planning software for an entire building installation.This software encompas ses the areas of electricity, bathroominstallation, heating, air conditioning and ventilation. Integratedproduct databases for various manufacturers allow for the followingfunctions to be im plemented:
Generation of 2D or 3D floor plans
Generation of wiring plans for differing installations
Generation of plans for TV facilities, networks, telephonenetworks
Generation of tendering docum ents
Generation of equipment lists
Generation of distribution plans
Accommodation for ins tallation guidelines
Generation of test docum ents
Lucas Nlle GmbH Page 33/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
34/78
Pos. Product name Bestell-Nr. Anz.
20 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a wide
variety of components (e.g. PC and monitor-holders)4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
Accessories:
Lucas Nlle GmbH Page 34/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
35/78
21 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HU
Usable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
22 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
Lucas Nlle GmbH Page 35/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
36/78
23 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 36/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
37/78
Pos. Product name Bestell-Nr. Anz.
24 Wireless LAN USB device server LM9080 1
USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.
Technical data:
Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 Mbit
Built-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g
Includes:
Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples
Additionally recommended
Lucas Nlle GmbH Page 37/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
38/78
25 Multi13S digital multimeter LM2330 1
Universal precision lab multimeter and temperature meter with IRinterface for high-quality, universal m easurement and testing ineducational settings, power plants, process control installations etc.
3-digit multimeter; resolution: 3,100 digits
Measurement clas sification CATII-1000V
Can be connected to UniTrain-I system via IR interface
Voltage and current m easuring ranges : 30m V-1000V DC, 3V-1000V AC; 3mA-16A DC; 30m A-10A AC
Resis tance ranges : 30ohm-30Mohm
Special functions: C for temperature measurem ents us ingPT100/1000 thermocouple
Continuity and diode testing
Automatic range s election and battery shut-off, min ./max. anddata hold function
Safety fuse for current measurement range up to 300mA
Protection agains t high currents in the mA range for nominalvoltage of 1000V
Display with bar chart and backlighting
Includes protective sleeve, measuring leads, 1 x spare fuse,9V battery, calibra tion certificate
Lucas Nlle GmbH Page 38/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
39/78
EGT 4 KNX/EIB bus systems
EGT 4 KNX/EIB bus systems
The wiring installation training module on KNX/EIB buses is a multimedia training project covering the followingtopics:
Project management, planning, calculation
Programming and parameter configurationCommissioning and testing
Protective measures conforming to VDE standards
Different software packages are used to work through the various training stages in a training system that veryclosely follows actual practice. The training software is specially designed for educational use and provideshierarchical, structured guidance to the student. This provides a considerable boost to the self-learning aspect of the system.
Lucas Nlle GmbH Page 39/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
40/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 40/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
41/78
Pos. Product name Bestell-Nr. Anz.
26 VDE building management training kit: interface, KNX/EIB buses ,fault sim.
SE2671-1D 1
The training objectives are organised as follows:
Training project, overview
Design of bus structures, topology
Applications for KNX/EIB buses
Project planning with ETS3
Packet structure and addressing
Transmission media, bus
Installation of a KNX/EIB system with various applications
Lighting control
Blind/shutter control
Heating control
Room monitoring, motion sensors
Commissioning and specific tests
Lightning and excess voltage protection
Documentation, handover and test report All experiments can be undertaken with fault s imulation switchedon or off. By combining the various simulated faults, a largenumber of exercises can devised.
Equipment and functions supplied
CD-ROM with Labsoft browser and course software
Planning software for planning installations in wholebuildings
Wiring installation training system Building management
systemsFault simulation: 32 simulated faults can be activated
Operating voltage: 230V/50Hz
PC connection: USB
Functional elements:Wall-embedded sub-distribution box 4-rowsLead-through terminals (30x) wired to 4mm safety socketsEIB power supply with chokeEIB-USB interfaceBlock of 8 EIB switch actuatorsBlock of 2 EIB blind actuatorsEIB lightning conductor terminalsEIB-bus interfaces (5x)Block of 2 EIB buttonsBlock of 4 EIB buttons
Lucas Nlle GmbH Page 41/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
42/78
EIB heating controlEIB information displayBlock of 4 EIB binary inputs12 PU pre-wired dummy panel for additional components
Building simulations
13 lamps2 blind/shutter models1 two-sided curtain models4 project overlays
Integrated measuring instruments:2 voltmeters, max. 600V1 ammeter, max. 10A1 three-channel oscilloscope, max.600V
Inputs and outputs: bus 2mm safety sockets, mains 4mmsafety sockets
Dimensions: 1000 x 800 x 220mm
Weight: 35 kg
Apart from the educational training software, the topic can besupplemented by planning software for an entire buildinginstallation. This software encompasses the areas of electricity,bathroom installation, heating, air conditioning and ventilation.Integrated product databases for various manufacturers allow for the following functions to be implemented:
Generation of 2D or 3D floor plans
Generation of wiring plans for differing installations
Generation of plans for EIB, IT, lightning protection etc.
Generation of tendering documents
Generation of equipment lists
Generation of distribution plans
Accommodation for installation guidelines
Generation of test documents
Lucas Nlle GmbH Page 42/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
43/78
27 ETS 4 Lite software for KNX / EIB (single licence) + dongle(D,GB,F,E)
SO4001-4L 1
ETS4 is the latest ETS generation, directly following on from theETS3 releas e. Very many improvements have been made in ETS4compared to ETS3.
Caution: limited to no more than 20 products (sufficient for educational needs )
Support for all common 32-bit and 64-bit Windowsoperating systems
Uses the latest Windows 2008 Server components for theETS4 database
Multi-monitor support (PC screens)
Automatic software updates
Import of KNX project/product data
Switching between various KNX elements such as objectsand group addresses plus s earch capability
Separate tree and list searches
Integrated KNX device param eter dialog in ETS4 interface.Single-click walk-through option for all parameter dialogs
Separate adminis tration of KNX bus interfaces for KNXmonitors and ETS4
You can define your own dynamic views (e.g. devices with
specific names or addresses)
Group addresses may be structured as desired, even withmore than three levels
Uses complete 16-bit address space for group addresses
Project wizard for rapid drafting of build ing s tructures
Automatic software updates in background
Online project diagnostics for analysing wiring errors
Flexible KNX bus/group monitor with controllable dis playoptions plus new filters and trigger conditions
Display of bus load
Lucas Nlle GmbH Page 43/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
44/78
Pos. Product name Bestell-Nr. Anz.
28 Set of 32 safety measurement leads, 2/4mm for Instrain -KNX SO5148-1N 1
Safety meas urement leads with s tackable 2 and 4m m laminatedsafety plugs and highly flexible double insulated wires.
Each set includes the following:
7 x 25cm long, black, 4mm
9 x 50cm long, black, 4mm
2 x 25cm long, blue, 4mm
2 x 50cm long, blue, 4mm
3 x 30cm long, red, 2mm
3 x 60cm long, red, 2mm
3 x 30cm long, black, 2mm
3 x 60cm long, black, 2mm
Wire cross s ection for 4mm leads 2.5 mm 2
Wire cross s ection for 2mm leads 0.5 mm 2
Rating for 4mm leads: 600V, CAT II, 32A
Rating for 2mm leads: 600V, CAT II, 10A
Accessories:
Lucas Nlle GmbH Page 44/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
45/78
29 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)
4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
30 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HUUsable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
Lucas Nlle GmbH Page 45/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
46/78
31 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
32 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 46/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
47/78
Pos. Product name Bestell-Nr. Anz.
33 Wireless LAN USB device server LM9080 1
USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.
Technical data:
Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)
Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 MbitBuilt-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g
Includes:
Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples
Additionally recommended
Lucas Nlle GmbH Page 47/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
48/78
8/10/2019 942 E InsTrain Wiring Installation Training System
49/78
EGT 5 Hazard alarm and access systems
EGT 5 Hazard alarm and access systems
The new training system for hazard alarm systems allows teachers to convey aspects relating to burglar and firealarms as a key part of modern wiring installations. The training focuses on how modern sensors work,interaction between alarms, sensors, shunt lock units and central controllers. The system can be programmedas desired and can be used in highly differentiated manner for training students at different levels. The hazardalarm system consists of modules typically used in practice, all of which are approved by German standards
authority VdS.
Basic knowledge of project planning for alarm systemsBasic knowledge of project planning for burglar alarmsBasic knowledge of project planning for fire alarmsBasic knowledge of project planning for access control systemsPhysical principles behind the operation of various sensorsInstallation of gas, water, smoke and burglar alarmsConfiguration of conventional alarm groupsInstallation of bus-linked sensors and alarmsProgramming of systems using a PC or control unit
Lucas Nlle GmbH Page 49/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
50/78
Pos. Product name Bestell-Nr. Anz.
35 Wiring installation training set: Interface, hazard alarm systemswith fault sim
SE2671-1F 1
Compact, multi-functional, computer based training equipment for teaching wiring ins tallation of domes tic hazard alarm systems . Allexperiments can be carried out with a fault-free system or withvarious sim ulated faults activated. By combining m ultiple faults, it isposs ible to set up a large number of training exercises.
The hardware is also supplemented by training software andplanning software for full wiring ins tallation of buildings . Anembedded product database featuring multiple manufacturersmakes it possible to generate and print out all kinds of plans andlists.
Combining the set with other training systems expands the projectoptions even further.
Includes
CD-ROM with Labsoft browser and course softwarePlanning software for complete wiring installations inbuildingsWiring installation training s et for hazard warning systems
Fault simulator allowing 32 faults to be activated1 Hazard alarm control unit1 LCD control panel1 SAFE-KEY shunt lock control panel1 Emergency power supply with gel cell rechargeable battery1 Removable lightning indicator 1 Horn speaker 1 Bus-linked motion sensor 2 2-way alarm group m odules3 Reed contacts2 Glass break sensors3 Moving doors /windows with magnetic locks1 Locking monitor 1 Gas alarm
1 Water alarm3 Fire alarm sockets1 Optical fire alarm1 Thermal differential s ensor 1 Thermal maximum sens or 1 Building alarm sens or 1 Panic button2 x Voltmeters, max. 600V1 x Amm eter max. 10A1 x Three-channel oscilloscope, max. 600VKNX interface (optional)Interface with USB portOperating voltage: 230V/50HzMains connection: 230/16ADimens ions: 1000 x 800 x 220mmWeight: 30kg
Equipment set comprising the following:
******** optionaler Artikel - Menuefhrung in GB **********
Lucas Nlle GmbH Page 50/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
51/78
36 Wiring installation training set: Interface, hazard alarm systemswith fault sim
SE2671-1FGB 1
Pos. Product name Bestell-Nr. Anz.
37 Voltage, phase + continuity tester with field direction indicator,max. 400V
LM8554 1
Robus t, safe and eas y-to-use tes t instrument for voltages up to 400V.Tests voltage, phase, polarity and continuity as well as indicating thedirection of a rotating (three-phase) electrical field.
Type PROFISAFE 400
IP 65 model with 9 LEDs
Power supplied by a durable solar cell and rechargeablelithium battery
Voltage ins ulation s trength > 5 kV
VDE-GS tested
Measurement category of instrument CAT IV
Nominal voltage range 12 ... 400 V
Display ranges 12, 24, 50, 120, 230, 400 V
Input resis tance 117 k
Frequency range 0 ... 2000 Hz
Current 3.4 mA
On period 30 s
Continuity testing 0 ... 500k
Measuring instruments:
Lucas Nlle GmbH Page 51/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
52/78
38 XIB - KNX gateway for connecting hazard alarm systems to KNXinstallations
LM8557 1
Die Schnittstelle zur Einbruchm elderzentrale XS/S 1.1 bindetdie ABB-Einbruchmeldetechnik in das KNX Bussystem ein.Die Schnittstelle erlaubt die bidirektionale Kommunikationzwischen dem KNX und dem Einbruchmeldesystem L240.Jeder einzelne Eingang der 80 Meldergruppeneingnge der L240 kann somit wahlweise einem konventionellen Melder an der L240 oder einem KNX-Melder am KNX-Buss ystemzugeordnet werden. Nur eine Richtung pro Meldergruppe is tmglich!Das Gert wird auf einer DIN-Hutschiene montiert. DieMontage kann im Gehuse der Einbruchmeldeanlage L240erfolgen.
Pos. Product name Bestell-Nr. Anz.
39 Set of 72 safety measurement leads, 2mm for Instrain SO5148-1P 1
Set of safety measurement leads with stackable 2-mm laminatedplugs and highly flexible, double-insulated leads, consisting of the
following:
10 safety connector leads, 2mm,100cm, black
10 safety connector leads, 2mm, 100cm,red
22 safety connector leads, 2mm, 100cm , yellow
10 safety connector leads, 2mm, 60cm, black
10 safety connector leads, 2mm, 60cm, red
10 safety connector leads, 2mm, 60cm , yellow
Wire cross section 0.5 mm
Rating: 600V, CAT II, 10A
Accessories:
Lucas Nlle GmbH Page 52/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
53/78
40 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)
4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
41 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HUUsable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
Lucas Nlle GmbH Page 53/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
54/78
42 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
43 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 54/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
55/78
Pos. Product name Bestell-Nr. Anz.
44 Wireless LAN USB device server LM9080 1
USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.
Technical data:
Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)
Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 MbitBuilt-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g
Includes:
Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples
Additionally recommended
Lucas Nlle GmbH Page 55/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
56/78
8/10/2019 942 E InsTrain Wiring Installation Training System
57/78
Learning management software
Learning ma nagement software
Lucas Nlle GmbH Page 57/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
58/78
List of articles:
Optionally available: multi user license with 5 or 10 dongles and update to version 4.0
Lucas Nlle GmbH Page 58/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
59/78
Pos. Product name Bestell-Nr. Anz.
46 Software, LabSoft Classroom Manager 4.0, single licence (D, GB, F,E, RU, PT)
SO2001-5A 1
LabSoft Classroom Manager is a comprehensive set of administration software for the UniTrain-I system and all LabSoftcourses. Classroom Manager comprises the followingindependent program components:
LabSoft Manager: Adminis tration of students and courses inLabSoftLabSoft Reporter: Student reports and s tatisticsLabSoft Editor: Creation and editing of courses and testsLabSoft Questioner: Creation of questions, measuringexercises and s ets of questions for courses and testsLabSoft TestCreator: Automatic generation of tests on thebasis of sets of questions
Features:
Ease of use of all programs thanks to graphical user interface in all component programsFor use in local area networks or on stand alone PCEase of installationNo additional database software required
Access control via USB dongle Available languages : D, GB, E, F, RU, PT
LabSoft Manager:
Adminis tration of LabSoft network ins tallation Adminis tration of an unlim ited number of students andcourses in LabSoft
Addition, deletion and editing of courses and tes ts in LabSoft Addition, deletion and editing of students and s tudent data Addition, deletion and editing of student groups (classes) Assignm ent of students to clas ses Assignm ent of cours es and tes ts to s tudents or classes
LabSoft Reporter:
Electronic monitoring of student progressGraphical presentation of progress in courses and testsPresentation of student or group resultsReports on courses , tests, single users or classesSummary of results and timeCalculation of average results for groupsMultiple search options for students, classes , courses or tests
LabSoft Editor:
HTML editor for eas y to use editing of LabSoft coursesEditing of course pagesWizard for creation of new courses and course pages
Automatic inclusion of new courses in an existing LabSoft
Lucas Nlle GmbH Page 59/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
60/78
installation Automatic creation of IMS-compatible navigation tree withoutthe need for programming knowledgeMoving cours e pages within the navigation tree at the click of a mouseEditing in WYSIWYG modeHTML view and page previewInsertion of graphics, animations and tablesInsertion of test questionsPage templates for a variety of page types
LabSoft Questioner:
Program for creating and editing questions, practicalmeas uring exercises and s ets of questions (question files)for electronic evaluationEasy creation of exercises and questions for courses andtests7 different types of question: s ingle and m ultiple choice,
miss ing text, assignment, matrices, arbitrary text, se lection of images
Abili ty to input meta data (points , time for questions , difficulty,required resources, etc.)Easy specification of tolerances for practical measuringexercises
LabSoft TestCreator:
Program for automatically creating electronic tes ts from s etsof questions (question files)
Automatic and m anual selection of ques tions and m eas uring
exercisesFilter functions (e.g.: type of question, difficulty) for pre-selection of questions
Automatic generation of tes ts according to a s et time or number of questionsVarious test options : arbitrary order of ques tions in a test,immediate display of results after completion
Automatic regis tration of tes ts in LabSoftPreview function showing the test as created
Includes:
CD-ROM with LabSoft Class room Manager 1 USB-dongle for operation of program
System requirements:
Server or PC with Windows Vista, 7, 8 or 8.1Microsoft Internet Explorer 7.0 or higher Minimum 100 MB free disk space1 free USB-port for USB-dongle
Lucas Nlle GmbH Page 60/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
61/78
Pos. Product name Bestell-Nr. Anz.
47 Collection of assignments Power Engineering / RenewableEnergies
SO2001-6E 1
Additionally recommended
Lucas Nlle GmbH Page 61/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
62/78
EGI 1 Project work "Building service entry with main distribution box"
EGI 1 Proje ct work "Building service entry with main distribution box"
This project work is intended to cement practical skills, planning for work and materials plus testing anddocumentation of complete projects. A pre-prepared model is used to train the safe use of common materialsand tools.Training objectives are organised as follows:
Training project, overviewElectricity feed, distribution
Installation of a service entry point for a building
Observing protective measures to prevent electric shocks
Mains systems
Installation of circuitry under plaster (lights and sockets)
Short circuits, faults to frame, faults to ground
Testing electrical sys tems in accordance with currently applicable standards
Testing TN systems
Testing RCDs
Measurement of insulation resistance, earth resistance and loop resistance
Test of three-phase rotating field, measurement of protective earth resistance, equipotential bonding
Lightning and excess voltage protection
Documentation, handover and test report
Lucas Nlle GmbH Page 62/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
63/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 63/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
64/78
Pos. Product name Bestell-Nr. Anz.
48 VDE building management trainer: wiring installation project, sub-distribution
SE2671-3A 1
This wiring installation training system is designed to conveytheoretical and practical knowledge in the subject of wiringins tallation. It is a compact, portable training system , well suited tocarrying out practical project work.
Contents
Planning and design of a service entry point
Implementation of a customer contract
Working out a sequence of work for installing a maindistribution box
Familiarisation with the various components of a buildingselectricity feed
Application and obs ervance of standards , guidel ines andtechnical connection conditions
Installation and wiring of various components, learningpractical skills using genuine parts
Measurement and testing of installed system
Compilation of test reports in accordance with DIN/VDEstandards
Includes
Basic unit with service entry point
Meter cabinet and cavity wall sockets
RCD, 4-pole
Combined l ightning arres ter nodule (B-type, C-typeprotection)
Wiring material
Planning software
Electronic domes tic electricity meter
4 Line circuit breakers
Selective line circuit breaker
Installation instructions
Technical data
Power supply, 400V CEE
Turned on via key swi tch
Pre-installed meter cabinet
Installation of circuits embedded in plaster or in conduits
Dimensions: 1000x800x220mm (WxHxD)
Lucas Nlle GmbH Page 64/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
65/78
Pos. Product name Bestell-Nr. Anz.
49 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)
4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
Accessories:
Lucas Nlle GmbH Page 65/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
66/78
50 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HU
Usable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
51 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
Lucas Nlle GmbH Page 66/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
67/78
52 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 67/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
68/78
8/10/2019 942 E InsTrain Wiring Installation Training System
69/78
EGI 2 Project work "Lighting and appliance circuits installedembedded in plaster"
Lucas Nlle GmbH Page 69/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
70/78
EGI 2 Project work "Lighting and appliance circuits installed embedded in plaster"
The wiring installation training system for "Lighting and appliance circuits" is a multimedia training projectcovering the following topics:
Installation circuits, planning, calculation
Cables, calculation, installation
Sub-distribution, planning,
Protective measures conforming to VDE standards
Various support panels make it possible to carry out installation embedded in plaster, exposed on top of theplaster or specifically for damp environments (bathrooms and toilets). The various installation projects areimplemented in authentic practical fashion based on a four-row sub-distribution box .
The training objectives:
Installation of on-off and multi-way circuits
Installation of intermediate multi-way circuits
Installation of multiple switch circuits
Installation of circuits using current pulse relays
Dimming fluorescent lamps
Dimming halogen lamps
Installation of a motion sensor for external lighting
Installation of multi-function comfort switches
Protective measures to prevent electric shocks
Testing RCDs
Measurement of insulation resistance, earth resistance and loop resistance
Test of three-phase rotating field, measurement of protective earth resistance, equipotential bonding
Lightning and excess voltage protection
Documentation, handover and test report
Lucas Nlle GmbH Page 70/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
71/78
Equipment set comprising the following:
Lucas Nlle GmbH Page 71/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
72/78
Pos. Product name Bestell-Nr. Anz.
54 VDE building management trainer: wiring installation exercise,mains
SE2671-3C 1
This wiring installation training system is designed to conveytheoretical and practical knowledge in the subject of wiringins tallation. It is a compact, portable training system , well suited tocarrying out practical project work.
Contents
Planning and design of a service entry point
Implementation of a customer contract
Working out a sequence of work for installing wiring invarious rooms
Familiarisation with the various ways of installing wiring Application and obs ervance of standards , guidel ines andtechnical connection conditions
Installation and wiring of various components, learningpractical skills using genuine parts
Measurement and testing of installed system
Compilation of test reports in accordance with DIN/VDEstandards
Includes
Basic unit with sub-dis tribution box and cavity wall s ockets
13 switches and sockets
Electronic ballast
Programmable multi-function switch
5 Incandescent lamps, 2 fluorescent lamps
1 Halogen lamp, 1 compact fluorescent lamp
5 Line circuit breakers
Lightning and excess voltage arrester (C-type, D-typeprotection)
2 Dimmers
Electronic transformer
Motion sens or
Oven s ocket
RCD, 4-pole
Remote pulse relay switches
Cables, wires, terminals
Storage case for installation material
Technical data
Power su l , 400V CEELucas Nlle GmbH Page 72/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
73/78
Turned on via key swi tch
Installation embedded in plaster on front, all in conduits
Punched hole grid for exposed wiring on rear with feed ins ideconduit
Dimensions: 1000x800x220mm (WxHxD)
Lucas Nlle GmbH Page 73/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
74/78
Pos. Product name Bestell-Nr. Anz.
55 Manual EGI 2 Wiring installation practice SH5001-3C 1
High-quality, bound, colour teachers manual with rigid spine,including solutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glossy paper
Training contents:
Project work: Residential installation
Sub-project: Ins tallation of outdoor wiring Analysis Acceptance of contractSuggestions for s olutions
PlanningContract for workJob planningEstimateProcedureCompletion of contractFunction/safety testing (conforming to DIN VDE 0100 part600)Inves tigation of faultsCompletionDocumentationHandover to customer
Sub-project: Installation of kitchen
Sub-project: Ins tallation of living room and bedroom s
Sub-project: Ins tallation of bathroom and toilet
Sub-project: Ins tallation in hallway, sub-dis tribution box
Test
Info-PoolRequired m aterialsPlanning documentsInstructionsSupplementary materialsSub-distribution box for full ins tallationLiterature and internet referencesGlossaryResources on CD-ROM
Media:
Lucas Nlle GmbH Page 74/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
75/78
Pos. Product name Bestell-Nr. Anz.
56 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1
The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.
The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer
Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)
4 steerable double casters, 2 with brakes
Worktop 1005 x 30 x 700mm (WxHxD)
Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926
Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047
Coating and adhesives must be PVC-free
Integrated removable socket strip with 5 plug sockets
Height of table top 830 mm
Dimensions : 1010 x 1350 x 700 (WxHxD)
Accessories:
Lucas Nlle GmbH Page 75/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
76/78
57 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking
ST8007-1A 1
1 Utensil drawer
1 Drawer, 2 HU
2 Drawers, 4 HU
Usable width: 330mm, usable depth: 480mm
Central locking
Metal drawers with surrounding row of slots
Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides
Dimensions: 430 x 580 x 590mm (WxDxH)
58 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)
Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
Lucas Nlle GmbH Page 76/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
77/78
59 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 77/78 www.lucas-nuelle.com
8/10/2019 942 E InsTrain Wiring Installation Training System
78/78
60 Set of tools ''Electric '' SE2670-4B 1
Leather case with document pocket and shoulder strap, includingtools specifically chosen for the needs of trainees. Edges arereinforced with aluminium corner pieces and the base contains arobus t galvanised m etal tray. The front and rear of the case can beopened s eparately and can be locked. The case contains thefollowing tools:
1 Telephone crim p tool, straight
1 Combined pliers
1 Angled cutters
1 Wire stripper
2 Workshop s crewdrivers
2 Cross-head screwdrivers
4 Electricians s crewdrivers
1 VDE voltage tester
1 Cable knife
1 Jokari cable knife
1 PUK hack saw
1 Electricians chisel
1 Stone chisel
1 Carpenters hamm er
1 Lump hammer
1 Trowel
1 Plas ter tray
1 Paint brush
Dimensions : 440 x 240 x 340 mm (LxWxH)
Weight: 5.0 kg