942 E InsTrain Wiring Installation Training System

8/10/2019 942 E InsTrain Wiring Installation Training System

1/78

Installation EngineeringTraining systems / traine rs for e lectrical wiring/building mana geme nt systems:

Protective circuitry, protective measures, building mains feed, lighting and intercom systems

Industrial wiring, intercoms, alarm systems, hazard alarms and access control

KNX/EIB, LON

Project work, technical practice, assembly practice systems, planning software

Lucas Nlle GmbH Page 1/78 www.lucas-nuelle.com


2/78

InsTrain wiring installation training system



3/78

InsTrain wiring installation training system

The InsTrain Multimedia Installation Lab is a computer-based training and experiment system designed for training and further education in installing electrical wiring. InsTrain has been developed jointly by the InsTrainGroup , which includes the following members:

Lucas-NlleBfe Oldenburg

Hager-Tehalit

Dehn&Shne

Gossen-Metrawatt

Busch-Jaeger

WAGO

RutenbeckData Design System

The InsTrain wiring installation training system is a unique, comprehensive experiment hardware system with aninterface and multimedia training programs. It is conceived in such a way so as to integrate cognitive and hands-on training into an overall concept linking together theory and practice and thus allowing specific targeting of handling skills. A host of multimedia courses, starting from the basics and extending up to advanced topics, isavailable for schools, vocational colleges and training of engineers.

Multimedia-based, animated training units lead through the theory and provide instructions for conductingexperiments. This allows trainees to work unsupervised, although the system also allows teachers and trainingstaff the freedom to intervene at any juncture according to the needs of students.

The systems multimedia learning environment and the large proportion of independent learning ensure highlevels of motivation in students and maximise their degree of success in learning the material to guarantee thattopics are learned effectively and efficiently. Access to the multimedia courses along with the control of virtualinstruments and fault simulation is provided by LabSoft, the systems open experimentation platform. Thecourses convey the theoretical background and allow for experiments to be performed using the appropriatehardware for the course. The hardware includes an intelligent interface with a USB port, which provides thecapacity to make high-quality measurements when used in conjunction with the systems integrated virtualinstruments. In addition, the progress of students can be checked by having them identify a variety of simulatedfaults or by means of knowledge tests. All results can be documented electronically.

With the aid of the integrated fault simulation capability, students can be given various exercises in which theycan use typical measuring equipment to trace faults and document their results. The interactive training andexperiment software can be used by students to test their knowledge and it also provides feedback regarding theresults of experiments. All experiments can be undertaken with the fault simulation switched on or off. Bycombining the various simulated faults, a large number of exercises can be devised.



4/78


5/78


6/78

Equipment set comprising the following:



7/78

Pos. Product name Bestell-Nr. Anz.

1 VDE building management: interface, house connection & distr.,fault sim.

SE2671-1M 1

Compact, multi-functional, computer-based training equipment for electrical wiring installation and associated protective measuresTopic: "Building service entry and main distribution box". Allexperiments can be undertaken with fault simulation switched onor off. By combining the various simulated faults, a large number of exercises can be devised.

The hardware is supplemented not only by training software butalso by software for planning electrical wiring installations for complete buildings. Built-in product databases encompassingvarious manufacturers allow for all kinds of plans and lists to begenerated and printed out.

Equipment and functions included

CD-ROM with Labsoft browser and course software

Planning software for planning installations in wholebuildings

Wiring installation training system Building service entryand main distribution box

Fault simulation: 32 simulated faults can be activated

Building distribution box model with measuring socketsEquipotential bonding bar

Water mains pipe

Complete main distribution box for building

Digital electricity meter and mains switch

4 x circuit breakers

RCD

2 x 230V sockets

CEE socket, 400V

Lamp circuit (on-off)

2 x voltmeters, max. 600V

1 x ammeter, max. 10A,

1 x three-channel oscilloscope max. 600V

Interface with USB port

Operating voltage: 3 x 230V/400V/50Hz

Connector: CEE 16A

Dimensions: 1000 x 800 x 220mm



8/78

Weight: 45kg



9/78

Measuring instruments:



10/78


2 Installation tester for protective circuitry according to DINVDE0100,/Part 600

LM8552 1

Its wide-range m easuring equipment allows this tester to be used for measurements on AC and three-phase networks with voltagesranging from 65 up to 500 V and frequencies from 15.4 to 420 Hz.

Loop and mains impedance measurement

Measurement of insulation resistance at nominal voltage withvariable or ris ing test voltage, measurement of very lowresistance

Measurement of earth resistance

On-site insulation meas urement

Universal connector systemDisplay of permitted circuit breaker types for electricalinstallations

Test of operation of electricity meters

Calculation of wire lengths for common copper wiring

Measurement of pre-conducting, leakage and compensatingcurrents up to 1 A as well as operating current

Measurement of rotating field direction (phase sequence,highest chained voltage)

Measurement of contact voltage without using a switch.

Trip testing at nominal current, measurement of trip times

Special testing of systems or RCD circuit breakers

Testing of system s or RCD circuit breakers with ris ingleakage current and display of trip current and contact voltageat instant of tripping.

Testing of RCD circuit breakers under following conditions : IN, 1 IN, 2 IN, 5 IN

Testing of RCD circuit breakers s uitable for pulsating DC withpositive or negative half waves

Testing of RCD circuit breakers with adjus table leakagecurrent for determining contact voltage and trip current

Evaluation software

The Software acquires all the neces sary data for compilingreports in accordance with DIN VDE 0100 part 600

Test reports (ZVEH) can be compiled autom atically

Individually specifiable d istribution s tructures with circuit/RCDdata

Compiled s tructures can be s tored and loaded into the tester as needed



11/78

The tester can exchange data with a PC in both directions viaa USB link

Data export in EXCEL, CSV and XML formats

Includes

1 Metrawatt test, type Profitest Mbase

1 Earthed plug module (PRO-Schuko)

1 2-pole meas uring adapter

1 Lead for extension to 3-pole adapter (PRO-A3-II)

2 Crocodile clips

1 Strap

1 Set of batteries (8 x LR6)1 Set of brief ins tructions

1 Set of full ins tructions (on CD-ROM)

1 DKD calibration certificate

1 PC Program ETC for comm unication with the testing device.



12/78


3 SybaPro mobile InsTrain/CarTrain experiment trolley ST7200-3K 1

The mobile aluminium-profile experiment trolley is speciallydesigned to accomm odate components of the InsTrain and CarTrainsystem. All the Ins-Train and CarTrain system com ponents can besafely mounted in structured fashion for lessons from the front of aclass or for students' own practicals. For students, this provides amodern, educationally designed workplace with a worktop andconnections for multimedia.

The mobile experiment stand is delivered in kit form andneeds to be ass embled by the customer

Alum inium profile with integrated grooves for attaching a wide

variety of components (e.g. PC and monitor-holders)4 steerable double casters, 2 with brakes

Worktop 1005 x 30 x 700mm (WxHxD)

Table top made of highly compressed multilayered chipboardconforming to DIN EN 438-1, light grey, with double-s ided 0.8mm slightly textured laminate coating (Resopal) incompliance with DIN 16926

Table top bordered with solid, impact-resistant edging madeof 3-mm thick plastic, colour RAL 7047

Coating and adhesives must be PVC-free

Integrated removable socket strip with 5 plug sockets

Height of table top 830 mm

Dimensions : 1010 x 1350 x 700 (WxHxD)

Accessories:



13/78

4 Under-table cabinet, suspended, 3 drawers + utensil drawer,central locking

ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU

2 Drawers, 4 HU

Usable width: 330mm, usable depth: 480mm

Central locking

Metal drawers with surrounding row of slots

Body made of 19mm-thick, highly-compressed, multi-layered fine chipboard with grade E1 plastic coating onboth sides

Dimensions: 430 x 580 x 590mm (WxDxH)

5 PC holder for Syba experiment trolleys, height and widthadjustable

ST7200-5A 1

Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange

Adjus table assembly height

Adjus table width (160 - 255mm)

Can be mounted to left or right

Includes all equipment necessary for assem bly (4 bolts and 4tenon blocks)

Acid-res is tant epoxy-res in powder coating, 80m thickapprox., colour RAL7047



14/78

6 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100

ST8010-4L 1

Pivoting monitor holder for attachment to aluminium profiles of furniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.

Pivoting arm with two-part joint

Quick-lock for adjustment to any height on extrudedaluminium profile

VESA fastening 7.5 x 7.5cm

Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter

2 Cable clips

Adequate carrying capacity 10kg

TFT monitor can be turned parallel to the table edge

Separation can be adjusted to anywhere between 105 and480mm

Additionally included:

Cable managem ent set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range

The set consis ts of the following:

3 Cross cable binders for front and rear grooves of aluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile



15/78


7 Wireless LAN USB device server LM9080 1

USB device server for connecting USB equipm ent to a network via aWLAN or LAN link. Instead of connecting directly via a local USB port,communication between the computer and the training system ishandled by the USB device server via WLAN or LAN connection.

Technical data:

Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 Mbit

Built-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g

Includes:

Main unitWide-range power s upply, 100-240V, 50/60HzPatch lead for configurationCD-ROM with configuration and operating software,instruction m anualExpanded ins truction manual with configuration examples

Additionally recommended



16/78


17/78

EGT 2 Wiring installation for lighting and appliance circuits



18/78

EGT 2 Wiring installation for lighting and appliance circuits

The wiring installation training module Lighting and appliance circuits is a project-based multimedia trainingsystem covering the following topics:

Wiring circuits, planning, calculations

Cables, calculation, wiring

Sub-distribution, planning,

VDE conformant safety measures

Different software packages are used to work through the various training stages in a training system that veryclosely follows actual practice. The training software is specially designed for educational use and provideshierarchical, structured guidance to the student. This provides a considerable boost to the self-learning aspect of the system.

The training objectives are structured as follows:Installation of on-off and intermediate circuits

Installation of multi-switch circuits

Installation multi-circuit switches

Installation of circuits with current pulse relays

Dimming fluorescent lamps

Dimming halogen lamps

Installation of a motion sensor for external lighting

Installation of multi-functional comfort switches

Protective measures to prevent electric shocks

Testing RCDs

Insulation measurements, earth measurements, loop resistance

Testing rotating fields, protective earth measurements, equipotential bonding measurements

Lightning and excess voltage protection

Documentation, handover and test report



19/78




20/78


9 VDE building management: interface, lighting & appliance wiring,fault sim.

SE2671-1C 1

Compact, multi-functional, computer-based training equipment for electrical wiring installation and associated protective measures onthe topic: Lighting and appliance circuits. The system contentsinclude the overarching topics of wiring ins tallation circuits, planning,cabling, ins tallation of wiring, sub-dis tribution and protectivemeasures conforming to VDE standards . All experiments can beundertaken with fault simulation swi tched on or off. By combining thevarious simulated faults, a large number of exercises can bedevised.

The hardware is s upplem ented not only by training software but alsoby software for planning electrical wiring ins tallations for completebuildings. Built-in product databases encompass ing variousmanufacturers allow for all kinds of plans and lists to be generatedand printed out.

The training objectives are s tructured as follows:

Training projects, overview

Producing various documentation

Training project: Installation of a kitchen according tocustomer order

Training project: Ins tallation of a bathroom after detailedmeetings with customer

Training project: Ins tallation of a hall with job planningTraining project: Ins tallation of a bedroom/nursery accordingto customer order

Training project: Sub-dis tribution with planning andcalculation of costs

Testing of all ins tallations in accordance with DIN VDE 0100part 600



All experiments can be undertaken with fault s imulation switched onor off. By combining the various sim ulated faults, a large number of exercises can devised.

Equipment and functions supplied



Wiring installation training system Building service entry andmain distribution box

Fault simulation: 32 simulated faults can be activated

Combined residual current circuit-breaker RCCB, 30 mA

3-pole circuit breaker

6 sin le- ole circuit breakersLucas Nlle GmbH Page 20/78 www.lucas-nuelle.com


21/78

Excess voltage protection circuit for electronic equipment

High-sens itivity excess voltage protection circuit for electronicequipment

Current-surge relay

3 x 230V sockets

Appliance s ocket, 400V

4 on-off/change-over switches

Multi-circuit switch

Cross-over switch

2 dimmers

Motion sensors

2 Fluorescent lights with sockets, ballast and starter

1 Compact fluorescent lamp with dimm able ballast module

1 Low voltage halogen lamp with dimmable electronictransformer

1 Multi-function switch with m otion detector

2 x voltmeters , max. 600V


1 x Three-channel oscilloscope max. 600V

Inputs and outputs: 4mm safety sockets

Measuring inputs: 2mm safety sockets

2 x voltmeters , max. 600V


1 x three-channel oscilloscope max. 600V

Interface with USB port

Operating voltage: 3 x 230V/400V/50Hz

Connector: CEE 16A

Dimens ions: 1000 x 800 x 220mm

Weight: 25kg



22/78


10 Voltage, phase + continuity tester with field direction indicator,max. 400V

LM8554 1

Robus t, safe and eas y-to-use tes t instrument for voltages up to 400V.Tests voltage, phase, polarity and continuity as well as indicating thedirection of a rotating (three-phase) electrical field.

Type PROFISAFE 400

IP 65 model with 9 LEDs

Power supplied by a durable solar cell and rechargeablelithium battery

Voltage ins ulation s trength > 5 kV

VDE-GS tested

Measurement category of instrument CAT IV

Nominal voltage range 12 ... 400 V

Display ranges 12, 24, 50, 120, 230, 400 V

Input resis tance 117 k

Frequency range 0 ... 2000 Hz

Current 3.4 mA

On period 30 s

Continuity testing 0 ... 500k




23/78

11 Installation tester for protective circuitry according to DINVDE0100,/Part 600

LM8552 1

Its wide-range m easuring equipment allows this tester to be used for measurements on AC and three-phase networks with voltagesranging from 65 up to 500 V and frequencies from 15.4 to 420 Hz.

Loop and mains impedance measurement

Measurement of insulation resistance at nominal voltage withvariable or ris ing test voltage, measurement of very lowresistance

Measurement of earth resistance

On-site insulation meas urement

Universal connector system

Display of permitted circuit breaker types for electricalinstallations

Test of operation of electricity meters

Calculation of wire lengths for common copper wiring

Measurement of pre-conducting, leakage and compensatingcurrents up to 1 A as well as operating current

Measurement of rotating field direction (phase sequence,highest chained voltage)

Measurement of contact voltage without using a switch.

Trip testing at nominal current, measurement of trip times

Special testing of systems or RCD circuit breakers

Testing of system s or RCD circuit breakers with ris ingleakage current and display of trip current and contact voltageat instant of tripping.

Testing of RCD circuit breakers under following conditions : IN, 1 IN, 2 IN, 5 IN

Testing of RCD circuit breakers s uitable for pulsating DC withpositive or negative half waves

Testing of RCD circuit breakers with adjus table leakagecurrent for determining contact voltage and trip current

Evaluation software

The Software acquires all the neces sary data for compilingreports in accordance with DIN VDE 0100 part 600

Test reports (ZVEH) can be compiled autom atically

Individually specifiable d istribution s tructures with circuit/RCD

dataCompiled s tructures can be s tored and loaded into the tester as needed

The tester can exchange data with a PC in both directions via



24/78

a USB link

Data export in EXCEL, CSV and XML formats

Includes

1 Metrawatt test, type Profitest Mbase

1 Earthed plug module (PRO-Schuko)

1 2-pole meas uring adapter

1 Lead for extension to 3-pole adapter (PRO-A3-II)

2 Crocodile clips

1 Strap

1 Set of batteries (8 x LR6)

1 Set of brief ins tructions

1 Set of full ins tructions (on CD-ROM)

1 DKD calibration certificate

1 PC Program ETC for comm unication with the testing device.



25/78


12 Set of safety measurement cables, 4mm (23 leads), for Instrain SO5148-1M 1

Safety meas urement leads with stackable 4mm laminated safetyplugs and highly flexible double insulated wires.

Each set includes the following:

8 x 25cm long, black



1 x 25cm long, blue

4 x 50cm long, blue

3 x 100cm long, blue

2 x 50cm long, green/yellow

2 x 100cm long, green/yellow

1 x 50cm long, red

Wire cross section 2,5 mm 2

Rating: 600V, CAT II, 32A

Accessories:



26/78




Alum inium profile with integrated grooves for attaching a widevariety of components (e.g. PC and monitor-holders)

4 steerable double casters, 2 with brakes









ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU

2 Drawers, 4 HUUsable width: 330mm, usable depth: 480mm

Central locking






27/78


ST7200-5A 1








ST8010-4L 1






2 Cable clips










28/78




Technical data:

Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)

Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 MbitBuilt-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g

Includes:





29/78

18 Multi13S digital multimeter LM2330 1

Universal precision lab multimeter and temperature meter with IRinterface for high-quality, universal m easurement and testing ineducational settings, power plants, process control installations etc.

3-digit multimeter; resolution: 3,100 digits

Measurement clas sification CATII-1000V

Can be connected to UniTrain-I system via IR interface

Voltage and current m easuring ranges : 30m V-1000V DC, 3V-1000V AC; 3mA-16A DC; 30m A-10A AC

Resis tance ranges : 30ohm-30Mohm

Special functions: C for temperature measurem ents us ingPT100/1000 thermocouple

Continuity and diode testing

Automatic range s election and battery shut-off, min ./max. anddata hold function

Safety fuse for current measurement range up to 300mA

Protection agains t high currents in the mA range for nominalvoltage of 1000V

Display with bar chart and backlighting

Includes protective sleeve, measuring leads, 1 x spare fuse,9V battery, calibra tion certificate



30/78

EGT 3 Communication and networks

EGT 3 Communication and networks

The wiring installation training module on networks is a multimedia training project covering the following topics:

Application-neutral communications cabling in conformance with EN 50173-4

Cabling in conformance with EN 50173-4

Infrastructure for disseminating data using Home Office

Sub-distribution from electricity meter panel for multimedia applications

Connectors/cabling (to install yourself), difference between optical fibres, polymer optical fibres andcables

LAN/WLAN applications

Expansions to system (radio, co-ax etc.)

Calculation and installation of aerial/cabling sys tems

Lightning and excess voltage protectionHandover report for installation

Fault simulation




31/78




32/78


19 Building management training kit: interface, networks, fault sim. SE2671-1E 1

The training objectives are organised as follows:

Training projects, overview

Connection of two PCs using a cross-over cable

Making and tes ting a cross -over cable

Installation, wiring and testing of two RJ45 sockets in achannel segment

Networking PCs via RJ 45 sockets (no soldering, screwing or stripping)

Equipping a distributor with NTBA, W-LAN router, etc.

Installation of a patch panel in a multimedia distributor

Making a patch cable

Networking PCs via network switches and patch panels

Networking two PCs via polymer optical fibre (POF)

Configuring a DSL connection

Setting up a W-LAN connection

Inputting a signal via a DVB-T receiver

Installation of lead-through and terminal sockets in a channelsegment (co-ax)


All experiments can be undertaken with fault s imulation switched onor off. By combining the various sim ulated faults, a large number of exercises can be devised.

Technical data

Operating voltage: 230/400V/50Hz

Connector: 16A earthed plug

PC connection: USB

Functional elem ents:Multimedia distribution cabinet4-way switch4-port hub2 plug sockets for appliances with protection class IIDSL W-LAN router 2 earthed plug sockets 230VSplitter 2 channel segments

Assembly equipm ent for RJ 45 sockets , Cat 6a2 RJ45/fibre-optic converters

Assembly equipm ent for antenna sockets

Assembly equipm ent for fibre optic/POF

Integrated m easuring ins truments:2 voltmeters, max. 600V1 ammeter, max. 10A1 three-channel oscilloscope, max. 600V



33/78

Dimens ions: 1000 x 800 x 220mm

Weight: 45kg

Apart from the educational training s oftware, the topic can be

supplemented by planning software for an entire building installation.This software encompas ses the areas of electricity, bathroominstallation, heating, air conditioning and ventilation. Integratedproduct databases for various manufacturers allow for the followingfunctions to be im plemented:

Generation of 2D or 3D floor plans

Generation of wiring plans for differing installations

Generation of plans for TV facilities, networks, telephonenetworks

Generation of tendering docum ents

Generation of equipment lists

Generation of distribution plans

Accommodation for ins tallation guidelines

Generation of test docum ents



34/78





Alum inium profile with integrated grooves for attaching a wide

variety of components (e.g. PC and monitor-holders)4 steerable double casters, 2 with brakes








Accessories:



35/78


ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU

2 Drawers, 4 HU


Central locking





ST7200-5A 1









36/78


ST8010-4L 1






2 Cable clips










37/78




Technical data:

Device Interfaces: 2 x USB 2.0 Hi-Speed Port (us ing anoptional USB hub, a max. of 15 USB connections arepossible)Network Interfaces: LAN / WLAN: 10, 100, 1000 Mbps (auto-detect) / IEEE 802.11a/b/g/n, up to 300 Mbit

Built-in antenna (2T2R) for WLANWLAN: Ad-hoc- or infrastructure modeSupported wireless security: WEP(64/128), WPA-PSK(TKIP/AES), WPA2-PSK(AES)Configuration via setup program or web-interfaceSupported Operating Systems: Windows 8/7/Vista/XP, Server 2008/2003Dimens ions m ain unit: B: 126,4 mm D: 71,5 mm H: 24,2mm ( 2 mm)Weight: 105 g

Includes:





38/78

25 Multi13S digital multimeter LM2330 1

Universal precision lab multimeter and temperature meter with IRinterface for high-quality, universal m easurement and testing ineducational settings, power plants, process control installations etc.

3-digit multimeter; resolution: 3,100 digits

Measurement clas sification CATII-1000V

Can be connected to UniTrain-I system via IR interface

Voltage and current m easuring ranges : 30m V-1000V DC, 3V-1000V AC; 3mA-16A DC; 30m A-10A AC

Resis tance ranges : 30ohm-30Mohm

Special functions: C for temperature measurem ents us ingPT100/1000 thermocouple

Continuity and diode testing

Automatic range s election and battery shut-off, min ./max. anddata hold function

Safety fuse for current measurement range up to 300mA

Protection agains t high currents in the mA range for nominalvoltage of 1000V

Display with bar chart and backlighting

Includes protective sleeve, measuring leads, 1 x spare fuse,9V battery, calibra tion certificate



39/78

EGT 4 KNX/EIB bus systems

EGT 4 KNX/EIB bus systems

The wiring installation training module on KNX/EIB buses is a multimedia training project covering the followingtopics:

Project management, planning, calculation

Programming and parameter configurationCommissioning and testing

Protective measures conforming to VDE standards




40/78




41/78


26 VDE building management training kit: interface, KNX/EIB buses ,fault sim.

SE2671-1D 1

The training objectives are organised as follows:

Training project, overview

Design of bus structures, topology

Applications for KNX/EIB buses

Project planning with ETS3

Packet structure and addressing

Transmission media, bus

Installation of a KNX/EIB system with various applications

Lighting control

Blind/shutter control

Heating control

Room monitoring, motion sensors

Commissioning and specific tests


Documentation, handover and test report All experiments can be undertaken with fault s imulation switchedon or off. By combining the various simulated faults, a largenumber of exercises can devised.

Equipment and functions supplied



Wiring installation training system Building management

systemsFault simulation: 32 simulated faults can be activated

Operating voltage: 230V/50Hz

PC connection: USB

Functional elements:Wall-embedded sub-distribution box 4-rowsLead-through terminals (30x) wired to 4mm safety socketsEIB power supply with chokeEIB-USB interfaceBlock of 8 EIB switch actuatorsBlock of 2 EIB blind actuatorsEIB lightning conductor terminalsEIB-bus interfaces (5x)Block of 2 EIB buttonsBlock of 4 EIB buttons



42/78

EIB heating controlEIB information displayBlock of 4 EIB binary inputs12 PU pre-wired dummy panel for additional components

Building simulations

13 lamps2 blind/shutter models1 two-sided curtain models4 project overlays

Integrated measuring instruments:2 voltmeters, max. 600V1 ammeter, max. 10A1 three-channel oscilloscope, max.600V

Inputs and outputs: bus 2mm safety sockets, mains 4mmsafety sockets

Dimensions: 1000 x 800 x 220mm

Weight: 35 kg

Apart from the educational training software, the topic can besupplemented by planning software for an entire buildinginstallation. This software encompasses the areas of electricity,bathroom installation, heating, air conditioning and ventilation.Integrated product databases for various manufacturers allow for the following functions to be implemented:

Generation of 2D or 3D floor plans

Generation of wiring plans for differing installations

Generation of plans for EIB, IT, lightning protection etc.

Generation of tendering documents

Generation of equipment lists

Generation of distribution plans

Accommodation for installation guidelines

Generation of test documents



43/78

27 ETS 4 Lite software for KNX / EIB (single licence) + dongle(D,GB,F,E)

SO4001-4L 1

ETS4 is the latest ETS generation, directly following on from theETS3 releas e. Very many improvements have been made in ETS4compared to ETS3.

Caution: limited to no more than 20 products (sufficient for educational needs )

Support for all common 32-bit and 64-bit Windowsoperating systems

Uses the latest Windows 2008 Server components for theETS4 database

Multi-monitor support (PC screens)

Automatic software updates

Import of KNX project/product data

Switching between various KNX elements such as objectsand group addresses plus s earch capability

Separate tree and list searches

Integrated KNX device param eter dialog in ETS4 interface.Single-click walk-through option for all parameter dialogs

Separate adminis tration of KNX bus interfaces for KNXmonitors and ETS4

You can define your own dynamic views (e.g. devices with

specific names or addresses)

Group addresses may be structured as desired, even withmore than three levels

Uses complete 16-bit address space for group addresses

Project wizard for rapid drafting of build ing s tructures

Automatic software updates in background

Online project diagnostics for analysing wiring errors

Flexible KNX bus/group monitor with controllable dis playoptions plus new filters and trigger conditions

Display of bus load



44/78


28 Set of 32 safety measurement leads, 2/4mm for Instrain -KNX SO5148-1N 1

Safety meas urement leads with s tackable 2 and 4m m laminatedsafety plugs and highly flexible double insulated wires.

Each set includes the following:

7 x 25cm long, black, 4mm


2 x 25cm long, blue, 4mm

2 x 50cm long, blue, 4mm

3 x 30cm long, red, 2mm

3 x 60cm long, red, 2mm



Wire cross s ection for 4mm leads 2.5 mm 2

Wire cross s ection for 2mm leads 0.5 mm 2

Rating for 4mm leads: 600V, CAT II, 32A

Rating for 2mm leads: 600V, CAT II, 10A

Accessories:



45/78














ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU


Central locking






46/78


ST7200-5A 1








ST8010-4L 1






2 Cable clips










47/78




Technical data:



Includes:





48/78


49/78

EGT 5 Hazard alarm and access systems

EGT 5 Hazard alarm and access systems

The new training system for hazard alarm systems allows teachers to convey aspects relating to burglar and firealarms as a key part of modern wiring installations. The training focuses on how modern sensors work,interaction between alarms, sensors, shunt lock units and central controllers. The system can be programmedas desired and can be used in highly differentiated manner for training students at different levels. The hazardalarm system consists of modules typically used in practice, all of which are approved by German standards

authority VdS.

Basic knowledge of project planning for alarm systemsBasic knowledge of project planning for burglar alarmsBasic knowledge of project planning for fire alarmsBasic knowledge of project planning for access control systemsPhysical principles behind the operation of various sensorsInstallation of gas, water, smoke and burglar alarmsConfiguration of conventional alarm groupsInstallation of bus-linked sensors and alarmsProgramming of systems using a PC or control unit



50/78


35 Wiring installation training set: Interface, hazard alarm systemswith fault sim

SE2671-1F 1

Compact, multi-functional, computer based training equipment for teaching wiring ins tallation of domes tic hazard alarm systems . Allexperiments can be carried out with a fault-free system or withvarious sim ulated faults activated. By combining m ultiple faults, it isposs ible to set up a large number of training exercises.

The hardware is also supplemented by training software andplanning software for full wiring ins tallation of buildings . Anembedded product database featuring multiple manufacturersmakes it possible to generate and print out all kinds of plans andlists.

Combining the set with other training systems expands the projectoptions even further.

Includes

CD-ROM with Labsoft browser and course softwarePlanning software for complete wiring installations inbuildingsWiring installation training s et for hazard warning systems

Fault simulator allowing 32 faults to be activated1 Hazard alarm control unit1 LCD control panel1 SAFE-KEY shunt lock control panel1 Emergency power supply with gel cell rechargeable battery1 Removable lightning indicator 1 Horn speaker 1 Bus-linked motion sensor 2 2-way alarm group m odules3 Reed contacts2 Glass break sensors3 Moving doors /windows with magnetic locks1 Locking monitor 1 Gas alarm

1 Water alarm3 Fire alarm sockets1 Optical fire alarm1 Thermal differential s ensor 1 Thermal maximum sens or 1 Building alarm sens or 1 Panic button2 x Voltmeters, max. 600V1 x Amm eter max. 10A1 x Three-channel oscilloscope, max. 600VKNX interface (optional)Interface with USB portOperating voltage: 230V/50HzMains connection: 230/16ADimens ions: 1000 x 800 x 220mmWeight: 30kg


******** optionaler Artikel - Menuefhrung in GB **********



51/78

36 Wiring installation training set: Interface, hazard alarm systemswith fault sim

SE2671-1FGB 1


37 Voltage, phase + continuity tester with field direction indicator,max. 400V

LM8554 1

Robus t, safe and eas y-to-use tes t instrument for voltages up to 400V.Tests voltage, phase, polarity and continuity as well as indicating thedirection of a rotating (three-phase) electrical field.

Type PROFISAFE 400

IP 65 model with 9 LEDs

Power supplied by a durable solar cell and rechargeablelithium battery

Voltage ins ulation s trength > 5 kV

VDE-GS tested

Measurement category of instrument CAT IV

Nominal voltage range 12 ... 400 V

Display ranges 12, 24, 50, 120, 230, 400 V

Input resis tance 117 k

Frequency range 0 ... 2000 Hz

Current 3.4 mA

On period 30 s

Continuity testing 0 ... 500k




52/78

38 XIB - KNX gateway for connecting hazard alarm systems to KNXinstallations

LM8557 1

Die Schnittstelle zur Einbruchm elderzentrale XS/S 1.1 bindetdie ABB-Einbruchmeldetechnik in das KNX Bussystem ein.Die Schnittstelle erlaubt die bidirektionale Kommunikationzwischen dem KNX und dem Einbruchmeldesystem L240.Jeder einzelne Eingang der 80 Meldergruppeneingnge der L240 kann somit wahlweise einem konventionellen Melder an der L240 oder einem KNX-Melder am KNX-Buss ystemzugeordnet werden. Nur eine Richtung pro Meldergruppe is tmglich!Das Gert wird auf einer DIN-Hutschiene montiert. DieMontage kann im Gehuse der Einbruchmeldeanlage L240erfolgen.


39 Set of 72 safety measurement leads, 2mm for Instrain SO5148-1P 1

Set of safety measurement leads with stackable 2-mm laminatedplugs and highly flexible, double-insulated leads, consisting of the

following:

10 safety connector leads, 2mm,100cm, black

10 safety connector leads, 2mm, 100cm,red

22 safety connector leads, 2mm, 100cm , yellow

10 safety connector leads, 2mm, 60cm, black

10 safety connector leads, 2mm, 60cm, red

10 safety connector leads, 2mm, 60cm , yellow

Wire cross section 0.5 mm

Rating: 600V, CAT II, 10A

Accessories:



53/78














ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU


Central locking






54/78


ST7200-5A 1








ST8010-4L 1






2 Cable clips










55/78




Technical data:



Includes:





56/78


57/78

Learning management software

Learning ma nagement software



58/78

List of articles:

Optionally available: multi user license with 5 or 10 dongles and update to version 4.0



59/78


46 Software, LabSoft Classroom Manager 4.0, single licence (D, GB, F,E, RU, PT)

SO2001-5A 1

LabSoft Classroom Manager is a comprehensive set of administration software for the UniTrain-I system and all LabSoftcourses. Classroom Manager comprises the followingindependent program components:

LabSoft Manager: Adminis tration of students and courses inLabSoftLabSoft Reporter: Student reports and s tatisticsLabSoft Editor: Creation and editing of courses and testsLabSoft Questioner: Creation of questions, measuringexercises and s ets of questions for courses and testsLabSoft TestCreator: Automatic generation of tests on thebasis of sets of questions

Features:

Ease of use of all programs thanks to graphical user interface in all component programsFor use in local area networks or on stand alone PCEase of installationNo additional database software required

Access control via USB dongle Available languages : D, GB, E, F, RU, PT

LabSoft Manager:

Adminis tration of LabSoft network ins tallation Adminis tration of an unlim ited number of students andcourses in LabSoft

Addition, deletion and editing of courses and tes ts in LabSoft Addition, deletion and editing of students and s tudent data Addition, deletion and editing of student groups (classes) Assignm ent of students to clas ses Assignm ent of cours es and tes ts to s tudents or classes

LabSoft Reporter:

Electronic monitoring of student progressGraphical presentation of progress in courses and testsPresentation of student or group resultsReports on courses , tests, single users or classesSummary of results and timeCalculation of average results for groupsMultiple search options for students, classes , courses or tests

LabSoft Editor:

HTML editor for eas y to use editing of LabSoft coursesEditing of course pagesWizard for creation of new courses and course pages

Automatic inclusion of new courses in an existing LabSoft



60/78

installation Automatic creation of IMS-compatible navigation tree withoutthe need for programming knowledgeMoving cours e pages within the navigation tree at the click of a mouseEditing in WYSIWYG modeHTML view and page previewInsertion of graphics, animations and tablesInsertion of test questionsPage templates for a variety of page types

LabSoft Questioner:

Program for creating and editing questions, practicalmeas uring exercises and s ets of questions (question files)for electronic evaluationEasy creation of exercises and questions for courses andtests7 different types of question: s ingle and m ultiple choice,

miss ing text, assignment, matrices, arbitrary text, se lection of images

Abili ty to input meta data (points , time for questions , difficulty,required resources, etc.)Easy specification of tolerances for practical measuringexercises

LabSoft TestCreator:

Program for automatically creating electronic tes ts from s etsof questions (question files)

Automatic and m anual selection of ques tions and m eas uring

exercisesFilter functions (e.g.: type of question, difficulty) for pre-selection of questions

Automatic generation of tes ts according to a s et time or number of questionsVarious test options : arbitrary order of ques tions in a test,immediate display of results after completion

Automatic regis tration of tes ts in LabSoftPreview function showing the test as created

Includes:

CD-ROM with LabSoft Class room Manager 1 USB-dongle for operation of program

System requirements:

Server or PC with Windows Vista, 7, 8 or 8.1Microsoft Internet Explorer 7.0 or higher Minimum 100 MB free disk space1 free USB-port for USB-dongle



61/78


47 Collection of assignments Power Engineering / RenewableEnergies

SO2001-6E 1




62/78

EGI 1 Project work "Building service entry with main distribution box"

EGI 1 Proje ct work "Building service entry with main distribution box"

This project work is intended to cement practical skills, planning for work and materials plus testing anddocumentation of complete projects. A pre-prepared model is used to train the safe use of common materialsand tools.Training objectives are organised as follows:

Training project, overviewElectricity feed, distribution

Installation of a service entry point for a building

Observing protective measures to prevent electric shocks

Mains systems

Installation of circuitry under plaster (lights and sockets)

Short circuits, faults to frame, faults to ground

Testing electrical sys tems in accordance with currently applicable standards

Testing TN systems

Testing RCDs

Measurement of insulation resistance, earth resistance and loop resistance

Test of three-phase rotating field, measurement of protective earth resistance, equipotential bonding





63/78




64/78


48 VDE building management trainer: wiring installation project, sub-distribution

SE2671-3A 1

This wiring installation training system is designed to conveytheoretical and practical knowledge in the subject of wiringins tallation. It is a compact, portable training system , well suited tocarrying out practical project work.

Contents

Planning and design of a service entry point

Implementation of a customer contract

Working out a sequence of work for installing a maindistribution box

Familiarisation with the various components of a buildingselectricity feed

Application and obs ervance of standards , guidel ines andtechnical connection conditions

Installation and wiring of various components, learningpractical skills using genuine parts

Measurement and testing of installed system

Compilation of test reports in accordance with DIN/VDEstandards

Includes

Basic unit with service entry point

Meter cabinet and cavity wall sockets

RCD, 4-pole

Combined l ightning arres ter nodule (B-type, C-typeprotection)

Wiring material

Planning software

Electronic domes tic electricity meter

4 Line circuit breakers

Selective line circuit breaker

Installation instructions

Technical data

Power supply, 400V CEE

Turned on via key swi tch

Pre-installed meter cabinet

Installation of circuits embedded in plaster or in conduits

Dimensions: 1000x800x220mm (WxHxD)



65/78














Accessories:



66/78


ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU

2 Drawers, 4 HU


Central locking





ST7200-5A 1









67/78


ST8010-4L 1






2 Cable clips










68/78


69/78

EGI 2 Project work "Lighting and appliance circuits installedembedded in plaster"



70/78

EGI 2 Project work "Lighting and appliance circuits installed embedded in plaster"

The wiring installation training system for "Lighting and appliance circuits" is a multimedia training projectcovering the following topics:

Installation circuits, planning, calculation

Cables, calculation, installation

Sub-distribution, planning,

Protective measures conforming to VDE standards

Various support panels make it possible to carry out installation embedded in plaster, exposed on top of theplaster or specifically for damp environments (bathrooms and toilets). The various installation projects areimplemented in authentic practical fashion based on a four-row sub-distribution box .

The training objectives:

Installation of on-off and multi-way circuits

Installation of intermediate multi-way circuits

Installation of multiple switch circuits

Installation of circuits using current pulse relays

Dimming fluorescent lamps

Dimming halogen lamps

Installation of a motion sensor for external lighting

Installation of multi-function comfort switches

Protective measures to prevent electric shocks

Testing RCDs

Measurement of insulation resistance, earth resistance and loop resistance

Test of three-phase rotating field, measurement of protective earth resistance, equipotential bonding





71/78




72/78


54 VDE building management trainer: wiring installation exercise,mains

SE2671-3C 1

This wiring installation training system is designed to conveytheoretical and practical knowledge in the subject of wiringins tallation. It is a compact, portable training system , well suited tocarrying out practical project work.

Contents

Planning and design of a service entry point

Implementation of a customer contract

Working out a sequence of work for installing wiring invarious rooms

Familiarisation with the various ways of installing wiring Application and obs ervance of standards , guidel ines andtechnical connection conditions

Installation and wiring of various components, learningpractical skills using genuine parts

Measurement and testing of installed system

Compilation of test reports in accordance with DIN/VDEstandards

Includes

Basic unit with sub-dis tribution box and cavity wall s ockets

13 switches and sockets

Electronic ballast

Programmable multi-function switch

5 Incandescent lamps, 2 fluorescent lamps

1 Halogen lamp, 1 compact fluorescent lamp

5 Line circuit breakers

Lightning and excess voltage arrester (C-type, D-typeprotection)

2 Dimmers

Electronic transformer

Motion sens or

Oven s ocket

RCD, 4-pole

Remote pulse relay switches

Cables, wires, terminals

Storage case for installation material

Technical data

Power su l , 400V CEELucas Nlle GmbH Page 72/78 www.lucas-nuelle.com


73/78

Turned on via key swi tch

Installation embedded in plaster on front, all in conduits

Punched hole grid for exposed wiring on rear with feed ins ideconduit

Dimensions: 1000x800x220mm (WxHxD)



74/78


55 Manual EGI 2 Wiring installation practice SH5001-3C 1

High-quality, bound, colour teachers manual with rigid spine,including solutions. CD-ROM with additional students manual,including exercises and worksheets.

Details:

Theoretical background

Colour CAD drawings for experiment set-ups and circuits

Exercises and worksheets

Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glossy paper

Training contents:

Project work: Residential installation

Sub-project: Ins tallation of outdoor wiring Analysis Acceptance of contractSuggestions for s olutions

PlanningContract for workJob planningEstimateProcedureCompletion of contractFunction/safety testing (conforming to DIN VDE 0100 part600)Inves tigation of faultsCompletionDocumentationHandover to customer

Sub-project: Installation of kitchen

Sub-project: Ins tallation of living room and bedroom s

Sub-project: Ins tallation of bathroom and toilet

Sub-project: Ins tallation in hallway, sub-dis tribution box

Test

Info-PoolRequired m aterialsPlanning documentsInstructionsSupplementary materialsSub-distribution box for full ins tallationLiterature and internet referencesGlossaryResources on CD-ROM

Media:



75/78














Accessories:



76/78


ST8007-1A 1

1 Utensil drawer

1 Drawer, 2 HU

2 Drawers, 4 HU


Central locking





ST7200-5A 1









77/78


ST8010-4L 1






2 Cable clips










78/78

60 Set of tools ''Electric '' SE2670-4B 1

Leather case with document pocket and shoulder strap, includingtools specifically chosen for the needs of trainees. Edges arereinforced with aluminium corner pieces and the base contains arobus t galvanised m etal tray. The front and rear of the case can beopened s eparately and can be locked. The case contains thefollowing tools:

1 Telephone crim p tool, straight

1 Combined pliers

1 Angled cutters

1 Wire stripper

2 Workshop s crewdrivers

2 Cross-head screwdrivers

4 Electricians s crewdrivers

1 VDE voltage tester

1 Cable knife

1 Jokari cable knife

1 PUK hack saw

1 Electricians chisel

1 Stone chisel

1 Carpenters hamm er

1 Lump hammer

1 Trowel

1 Plas ter tray

1 Paint brush

Dimensions : 440 x 240 x 340 mm (LxWxH)

Weight: 5.0 kg

942 E InsTrain Wiring Installation Training System

Documents

Transcript of 942 E InsTrain Wiring Installation Training System