Post on 29-Sep-2020
4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1
Pearl Slim DownlightNew streamline design, attractive, high-grade
Ultra-slim AppearanceWithout big can, low-profile recessed fixture,fit in the tightest of spaces Suitable for new construction and remodel installation
Integrated back plate Well anti-dust, anti-insect, and anti-light leakage
Mul�-color FinishWhite, black, silver & brushednickel colors available
Imported PMMA LGPEdge lighting technology Uniform and soft light Without spots, no yellowing
Dimming5%-100% dimmableTRIAC/ELV dimmers
LED DriverInnovative solution of CCT changeableDip switch including 3kinds CCT CCT changed by dip switch or wall switch
Easy Installa�onFlat and smooth surface makes installation easier Two spring clips can be attached to any ceiling material
Wet Loca�on ApprovedIntegrated lamp structureBy adding silicagel ring
PEARL
4
SPECIFICATIONSProduct
Type
Power
Voltage - Frequency
Color Temp. (ANSI)
CRI (Ra)
Typical lumens (lm)
Efficacy (LPW)
Beam Angle
Dimmable
Power Factor
Rated Lifetime - L70 (hrs.)
Operating Temperature
Dia. x MOL
Driver Dimensions (LxWxH)
Ceiling Opening Dia.
Weight (lb. / g)
4'' Pearl Slim Downlight
10W
120VAC 60Hz
4000K
80
800
80
110°
Yes
0.9
35,000
-20℃- 40℃(-4°F~104°F)
3.7"x2.8"x1.2" (94x71x30mm)
4.3" (110mm)
2700K
80
750
75
4.88"x0.45" (124x11.6mm)
5000K
80
850
85
SL-DR1104G25WH-10
SHENZHEN YIYUANLAI SCIENCE & TECHNOLOGY CO.,LTDTel:0755-89399066 E-mail:sales01@ssluce.com
Add:Room 127, 1/F, No.1 Building, Bantian Hi-tech Industrial Zone, Bantian Street, Longgang District, Shenzhen, Guangdong
Website://www.ssluce.com
Round
NEW CONSTRUCTION OR REMODEL INSTALLATION
Tools to open the appropriate holes in the ceiling.
Find out the template(for the hole size installation) in the box, use the circle template to measure the size of holes then cut out holes.
Holding the clips, and push the fixture into installation hole. Release spring clips and push into place.Combustible building element fitting
Combustible BuildingStructure Member
100mmfrom
rear orlamp to
combustiblematerial
A barrier may be required to prevent loose-fill insula-tion or loose combustible materials from contacting the luminaire
Connect the AC power.
1.Open the box.2.Take out accessory of wire clip.
1.Remove one of the knockouts on the side plate.2.Put wires through the hole.
1.Simply inserting the two ends of L,N,G wire sepertely into clips and turning.2.Lock the Box Cover.
Use suitable tool to remove one of the knockouts of the side plate.
3 COLORS IN 1 DOWNLIGHT INSTRUCTIONThere is dip switch on the front of junction box, and regularly marks2700K/4000K/5000K/SW, the dip switch also called CCT select-able.
1. By dip switchChoose certain color temperature (2700K/4000K/5000K) on dip switch, then the light will be that color.
2. By wall switchChoose "SW" on the dip switch firstly, then turn on the wall switch, light is 2700K, off and on again within 2S CCT changes to 4000K, act same again CCT changes to 5000K. Loop in turn.If light is off longer than 6~8S, it has memory function and CCT keeps same as last time when you turn it on.