4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 · 6/4/2019  · 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS...

2
4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 Pearl Slim Downlight New streamline design, attractive, high-grade Ultra-slim Appearance Without big can, low-profile recessed fixture, fit in the tightest of spaces Suitable for new construction and remodel installation Integrated back plate Well anti-dust, anti-insect, and anti-light leakage Mul�-color Finish White, black, silver & brushed nickel colors available Imported PMMA LGP Edge lighting technology Uniform and soft light Without spots, no yellowing Dimming 5%-100% dimmable TRIAC/ELV dimmers LED Driver Innovative solution of CCT changeable Dip switch including 3kinds CCT CCT changed by dip switch or wall switch Easy Installa�on Flat and smooth surface makes installation easier Two spring clips can be attached to any ceiling material Wet Loca�on Approved Integrated lamp structure By adding silicagel ring PEARL 4

Transcript of 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 · 6/4/2019  · 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS...

Page 1: 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 · 6/4/2019  · 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 Pearl Slim Downlight New streamline design, attractive, high-grade Ultra-slim

4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1

Pearl Slim DownlightNew streamline design, attractive, high-grade

Ultra-slim AppearanceWithout big can, low-profile recessed fixture,fit in the tightest of spaces Suitable for new construction and remodel installation

Integrated back plate Well anti-dust, anti-insect, and anti-light leakage

Mul�-color FinishWhite, black, silver & brushednickel colors available

Imported PMMA LGPEdge lighting technology Uniform and soft light Without spots, no yellowing

Dimming5%-100% dimmableTRIAC/ELV dimmers

LED DriverInnovative solution of CCT changeableDip switch including 3kinds CCT CCT changed by dip switch or wall switch

Easy Installa�onFlat and smooth surface makes installation easier Two spring clips can be attached to any ceiling material

Wet Loca�on ApprovedIntegrated lamp structureBy adding silicagel ring

PEARL

4

Page 2: 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 · 6/4/2019  · 4'' PEARL SLIM DOWNLIGHT 10W 3 COLORS IN 1 Pearl Slim Downlight New streamline design, attractive, high-grade Ultra-slim

SPECIFICATIONSProduct

Type

Power

Voltage - Frequency

Color Temp. (ANSI)

CRI (Ra)

Typical lumens (lm)

Efficacy (LPW)

Beam Angle

Dimmable

Power Factor

Rated Lifetime - L70 (hrs.)

Operating Temperature

Dia. x MOL

Driver Dimensions (LxWxH)

Ceiling Opening Dia.

Weight (lb. / g)

4'' Pearl Slim Downlight

10W

120VAC 60Hz

4000K

80

800

80

110°

Yes

0.9

35,000

-20℃- 40℃(-4°F~104°F)

3.7"x2.8"x1.2" (94x71x30mm)

4.3" (110mm)

2700K

80

750

75

4.88"x0.45" (124x11.6mm)

5000K

80

850

85

SL-DR1104G25WH-10

SHENZHEN YIYUANLAI SCIENCE & TECHNOLOGY CO.,LTDTel:0755-89399066 E-mail:[email protected]

Add:Room 127, 1/F, No.1 Building, Bantian Hi-tech Industrial Zone, Bantian Street, Longgang District, Shenzhen, Guangdong

Website://www.ssluce.com

Round

NEW CONSTRUCTION OR REMODEL INSTALLATION

Tools to open the appropriate holes in the ceiling.

Find out the template(for the hole size installation) in the box, use the circle template to measure the size of holes then cut out holes.

Holding the clips, and push the fixture into installation hole. Release spring clips and push into place.Combustible building element fitting

Combustible BuildingStructure Member

100mmfrom

rear orlamp to

combustiblematerial

A barrier may be required to prevent loose-fill insula-tion or loose combustible materials from contacting the luminaire

Connect the AC power.

1.Open the box.2.Take out accessory of wire clip.

1.Remove one of the knockouts on the side plate.2.Put wires through the hole.

1.Simply inserting the two ends of L,N,G wire sepertely into clips and turning.2.Lock the Box Cover.

Use suitable tool to remove one of the knockouts of the side plate.

3 COLORS IN 1 DOWNLIGHT INSTRUCTIONThere is dip switch on the front of junction box, and regularly marks2700K/4000K/5000K/SW, the dip switch also called CCT select-able.

1. By dip switchChoose certain color temperature (2700K/4000K/5000K) on dip switch, then the light will be that color.

2. By wall switchChoose "SW" on the dip switch firstly, then turn on the wall switch, light is 2700K, off and on again within 2S CCT changes to 4000K, act same again CCT changes to 5000K. Loop in turn.If light is off longer than 6~8S, it has memory function and CCT keeps same as last time when you turn it on.