Post on 14-Apr-2018
2005-2006 Aprilia Pegaso - PCIII USB - 1i926-411 www.powercommander.com
2005-2006 Aprilia PegasoInstallation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab1 Wire tap
You can also download the PowerCommander software and latest mapsfrom our web site at:
www.powercommander.com
The ignition MUST be turnedOFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
USB PortExpansion Port
1 Remove seat.
2 Remove left and right sidecovers.
3 Remove the fuel tank
4 Locate the connector from themain wiring harness to the injector and uplug this connector (Fig. A).
NOTE: This connector is grey in color.
5 Plug the connectors from thePCIII in-line of the stock wiringharness and throttle body(Fig. B).
6 Locate the throttle position con-nector (TPS) on the right handside of the throttle bodies.
7 Crimp the supplied wire tap tothe GREEN wire of the stockwiring harness (Fig. C).
8 Connect the GREY wire fromthe PCIII to the wire tap.
It is recommended to use dielec-tric grease on these connections.
Fig.
AFi
g. B
Fig.
C
2005-2006 Aprilia Pegaso - PCIII USB - 2i926-411 www.powercommander.com
PCIII connectors
Stock connector
Unplug this connector
Grey wire from PCIII
Wire tap
9 Attach the ground wire from thePower Commander to the nega-tive side of the battery. (Fig. D)
10 Install the Power Commander inthe trunk using the suppliedVelcro. Make sure to clean bothsurfaces with the supplied alco-hol swab before attaching.
11 Make sure all wires are routedproperly before bolting down thefuel tank and reinstalling theseat.
Fig.
D
2005-2006 Aprilia Pegaso - PCIII USB - 3i926-411 www.powercommander.com
Fig.
E
Ground wire
PCIII harness