Post on 23-Mar-2020
1/6
Common cavities and tooling
2-way
3-way / 3-way short
4-way
RE 18325-70/10.12Replaces: RE 18325-70/07.12
Summary
Description Page
Common cavity 2-way
CA-08A-2N 2CA-10A-2N 2CA-12A-2N 2CA-16A-2N 2CA-20A-2N 2Tools 2
Common cavity 3-way short
CA-08A-3C 3CA-10A-3C 3CA-12A-3C 3CA-16A-3C 3CA-20A-3C 3Tools 3
Description Page
Common cavity 3-way
CA-08A-3N 4CA-10A-3N 4CA-12A-3N 4CA-16A-3N 4CA-20A-3N 4Tools 4
Common cavity 4-way
CA-08A-4N 5CA-10A-4N 5CA-12A-4N 5CA-16A-4N 5CA-20A-4N 5Tools 5
RE 18325-70/10.122/6 Bosch Rexroth Oil Control S.p.A.
Common cavities - Tools2-way 1 mm = 0.03937 in
1 in = 25.4 mm
RE 18325-70/10.12 Bosch Rexroth Oil Control S.p.A. 3/6
tools only suitable for small series production.
Common cavities - Tools3-way short 1 mm = 0.03937 in
1 in = 25.4 mm
RE 18325-70/10.124/6 Bosch Rexroth Oil Control S.p.A.
Common cavities - Tools3-way 1 mm = 0.03937 in
1 in = 25.4 mm
RE 18325-70/10.12 Bosch Rexroth Oil Control S.p.A. 5/6
Common cavities - Tools4-way 1 mm = 0.03937 in
1 in = 25.4 mm
RE 18325-70/10.126/6 Bosch Rexroth Oil Control S.p.A.
Bosch Rexroth Oil Control S.p.A.Via Leonardo da Vinci 5P.O. Box no. 541015 Nonantola – Modena, Italy Tel. +39 059 887 611 Fax +39 059 547 848cartridges@oilcontrol.comwww.boschrexroth.com
© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may not be reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.
Subject to change.