Freelance, experience-based design.

Creator of a broad range of environments and experiences that engage people in the physical realm through art, technology, and architecture.

This is the work of Nicholas Ter Meer.

268 Monroe Street // Brooklyn, NY 11216 // 310.463.5216 // andtermeer.co

2

HAND // Projects designed with &™. Made with our hands.

&™ is the exploratory design studio and shop lead by Nicholas Ter Meer.

4

Weave Stool

The Weave Stool is a combination of styles and materials. Three of the four legs are pine while one is cedar. The dowel is connected and expressed by Japanese-style wedge dowel joinery. A unique addition is the seat--the stool is a single thread paracord woven in an elongated checker pattern.

Dimensions18” x 18” x 18”

2016

6

Dove Stool

The Dove Stool is a simple and bold stool. One-inch birch board is cut to a 90° dovetail, expressing the layers of board as strength and power of connections.

Dimensions18” x 18” x 12”

2016

8

Concrete Candle Holder

The Concrete Candle Holder is a series of three cylinder-cast concrete with brass hardware.

Dimensions4.5” x 4.5”

2016

10

01 Coffee Table

The 01 Coffee Table gracefully combines the organic lines of the live edge oak top with the structured aesthetic of the cedar and birch dowel base.

Dimensions65” x 25.5” x 17”

2015

12

01 Shelf

The 01 Shelf incorporates minimal aesthetics with traditional dowel joinery. The combination of cedar and birch is expressed by an exposed dowel joint. Upper left dowel, extends through frame to emphasize the joints function and also serve as a hook.

Dimensions27.5” x 17” x 70”

2015

14

UIC: CasaMare

The goal of the UIC was to reveal the myriad of interconnected political, economic, social and physical design issues that affect the use of common spaces and to create a collaborative framework that allows participants in the U.S. and Italy to create an ongoing dialogue. The UIC: CasaMare is planned as a long-term commitment to on-the-ground action with local players.

During the Casa Mare action the badanti group told us that one of the most important features of a Casa Mare is a hanging carpet. This carpet is made by weaving communally. We took this idea and found a material in the abandoned Ospedale al Mare that we could weave as a collective act to create a bulletin board for the Casa Mare.

Sponsor: 13th International Architecture Exhibition of the 2012 Venice BiennaleAgency: DSGN AGNCFabrication: DSGN AGNC and partners Urban Tricksters, Teatro Marinoni: Bene ComuneVenice, Italy 2012

16

MADE // Projects designed with &™. Made by various fabrication shops.

18

Dove Men+Care

A barbershop pop-up shop to showcase all of Dove Men+Care line of hair, body, and face products. The two barber chairs were booked for three days within the first two hours of operation.

Client: Dove Men+Care, EdelmanAgency: MKGFabrication: Pink Sparrow Washington DC, 2016

20

20" 48" 48" 48" 48" 48"

21'-8"

9'-0"

12"

58"

6"

6"

38"

89-1/4" 82" 88"

mirror mirror

satin white MDF satin white MDFsatin white MDF

canvas wrapped on site

12" 71-1/4" 12" 70" 12" 70" 12"

A01.3

8'-0"

accounted for 1" overlap all sides for mirror mounting

58" 58" 58"

molding to have mitered edge to connecting wall

20"

20"DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

1/4”=1’

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.2

MAKE 1

2ELEVATION1/2”=1 A01.2

3 PLAN1/2”=1A01.21 RIGHT SIDE

1/2”=1A01.2

20" 48" 48" 48" 48" 48"

21'-8"

9'-0"

12"

58"

6"

6"

38"

89-1/4" 82" 88"

mirror mirror

satin white MDF satin white MDFsatin white MDF

canvas wrapped on site

12" 71-1/4" 12" 70" 12" 70" 12"

A01.3

8'-0"

accounted for 1" overlap all sides for mirror mounting

58" 58" 58"

molding to have mitered edge to connecting wall

20"

20"DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

1/4”=1’

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.2

MAKE 1

2ELEVATION1/2”=1 A01.2

3 PLAN1/2”=1A01.21 RIGHT SIDE

1/2”=1A01.2

22

48" 48" 48" 48"

9'-0"

8'-0"

20"

20"

12"

58"

38"

16'-0"

all shelves will bemarked on canvas print

canvas wrapped on site

satin white MDF satin white MDF

molding to have mitered edge to connecting wall

A01.5

DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.4

1/2” = 1’

MAKE 1

3 LEFT SIDE1/2”=1’A01.4

2 ELEVATION1/2”=1’A01.4

1PLAN1/2”=1’ A01.4

48" 48" 48" 48"

9'-0"

8'-0"

20"

20"

12"

58"

38"

16'-0"

all shelves will bemarked on canvas print

canvas wrapped on site

satin white MDF satin white MDF

molding to have mitered edge to connecting wall

A01.5

DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.4

1/2” = 1’

MAKE 1

3 LEFT SIDE1/2”=1’A01.4

2 ELEVATION1/2”=1’A01.4

1PLAN1/2”=1’ A01.4

24

24"

18"

6"

1-1/2"

gloss white MDF

existing shelving unitexisting shelving unit

16-1/2"

39-1/2"

15-5/8"

18"

11"

29"

24" 29"

DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.7

1” = 1’

MAKE 2

2 LEFT SIDE1”=1’ A01.7

3FRONT1”=1’ A01.7

1PLAN1”=1’ A01.7

24"

18"

6"

1-1/2"

gloss white MDF

existing shelving unitexisting shelving unit

16-1/2"

39-1/2"

15-5/8"

18"

11"

29"

24" 29"

DOVE MEN+CAREDAD 2.0 SUMMIT

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

February17-18 , 2016

February19-20 , 2016

NTM

February 1, 2016

VENUE:Mandarin Oriental, DC1330 Maryland Ave SW,Washington, DC 20024

A01.7

1” = 1’

MAKE 2

2 LEFT SIDE1”=1’ A01.7

3FRONT1”=1’ A01.7

1PLAN1”=1’ A01.7

26

EDELMAN/DOVE MEN+CARE // DAD 2.0 SUMMIT // FEBRUARY 18-20 // MANDARIN ORIENTAL, DC // LEAD DESIGNER: NTM

6

ENTRY RENDERING

hanging lights from aircraft cable

wall displays

existing carpet with texture

entry check-in counter

text on wall

EDELMAN/DOVE MEN+CARE // DAD 2.0 SUMMIT // FEBRUARY 18-20 // MANDARIN ORIENTAL, DC // LEAD DESIGNER: NTM

10

BARBER SHOP ELEVATION RENDERING

additional product display with description on clipboard

EDELMAN/DOVE MEN+CARE // DAD 2.0 SUMMIT // FEBRUARY 18-20 // MANDARIN ORIENTAL, DC // LEAD DESIGNER: NTM

14

GALLERY WALL ELEVATION

EDELMAN/DOVE MEN+CARE // DAD 2.0 SUMMIT // FEBRUARY 18-20 // MANDARIN ORIENTAL, DC // LEAD DESIGNER: NTM

15

WE THE DADS WALL ELEVATION

WE THE DADS, manifesto collaboration with Vayner

14" x 14" x 48" podium, glass case has glass cube 14" T

28

NAIAS

As a sponsor of the 2016 North American International Auto Show, Delta Air Lines lounge featured a complete Delta Lounge experience. The lounge included an 80” monitor highlighting the power, performance and precision of the airline. A virtual reality experience took the visitor through a tour of the new features that Delta airplanes offer.

The unique interlocking screen was designed to be manipulated through out the week-long auto show, changing the layout of the space.

Client: Delta Air LinesAgency: MKGFabrication: Scenario Custom SceneryDetroit, Michigan, 2016

30

85-1/4"

3"

2-3/4"

25" 35-1/8" 25"

13" 15-3/4"

16"

85-1/4"35-1/4"

10"

10"

39-1/4"

96"

72-1/2"

42-1/2" 84"

73-3/4"

44-1/4"

42"

19-3/4" 19-3/4"

9"

39-1/4"

11-1/2"

13mm white coroplast

13mm white coroplast

13mm white coroplast

MAKE 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.1

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.1–A01.1

1 COROPLAST WALL W/ SCREEN3/4”=1’A01.1

jack with sandbag for weight

jack to be designedby lead carpentern

all birch rips painted black

85-1/4"

3"

2-3/4"

25" 35-1/8" 25"

13" 15-3/4"

16"

85-1/4"35-1/4"

10"

10"

39-1/4"

96"

72-1/2"

42-1/2" 84"

73-3/4"

44-1/4"

42"

19-3/4" 19-3/4"

9"

39-1/4"

11-1/2"

13mm white coroplast

13mm white coroplast

13mm white coroplast

MAKE 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.1

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.1–A01.1

1 COROPLAST WALL W/ SCREEN3/4”=1’A01.1

jack with sandbag for weight

jack to be designedby lead carpentern

all birch rips painted black

32

17'-3"

96"

16"

typical jack designedby Scenario

graphic appliedon site

3D graphics installedon site

back of frame painted black

13mm white coroplast

13mm white coroplast

13mm white coroplast

13mm white coroplast

seamless edgeapplied with vhband concealed screws

frame & jackspainted black

55" 48" 48" 55"

53-1/2" 48" 48" 53-1/2"

48"

24"

48"

MAKE 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1/2”=1”; perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.2

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.2–A01.2

1 PLAN 1/2”=1’A01.2

3 FRONT ELEVATION1/2”=1’A01.2

A SECTION A1/2”=1’A01.2

2 SIDE ELEVATION1/2”=1’A01.2

17'-3"

96"

16"

typical jack designedby Scenario

graphic appliedon site

3D graphics installedon site

back of frame painted black

13mm white coroplast

13mm white coroplast

13mm white coroplast

13mm white coroplast

seamless edgeapplied with vhband concealed screws

frame & jackspainted black

55" 48" 48" 55"

53-1/2" 48" 48" 53-1/2"

48"

24"

48"

MAKE 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1/2”=1”; perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.2

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.2–A01.2

1 PLAN 1/2”=1’A01.2

3 FRONT ELEVATION1/2”=1’A01.2

A SECTION A1/2”=1’A01.2

2 SIDE ELEVATION1/2”=1’A01.2

34

135°

225°

refurbished connection

5"

7"

1"

2"

connection remainsthe same; into Delta

signage

clean, finished edge

clean, finished edge

refurbished connection

24"

45-1/8"

45-1/8"

48"

48"

7"

REFURBISH 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.5

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.5–A01.5

A SECTION A3/4”=1’A01.5

2 REFURBISHED WALL SECTION 13/4”=1’A01.5

same finish as exisiting

same finish as exisiting

135°

225°

refurbished connection

5"

7"

1"

2"

connection remainsthe same; into Delta

signage

clean, finished edge

clean, finished edge

refurbished connection

24"

45-1/8"

45-1/8"

48"

48"

7"

REFURBISH 1

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.5

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.5–A01.5

A SECTION A3/4”=1’A01.5

2 REFURBISHED WALL SECTION 13/4”=1’A01.5

same finish as exisiting

same finish as exisiting

36

5"

7"

1"

2"

refurbished connection

135°

225°

24"

connection remainsthe same; into existingwall units

clean, finished edge

connection remainsthe same; into existingwall units

refurbished connection

clean, finished edge

45-1/8"

45-1/8"

48"

48"

7"

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.6

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.6–A01.6

REFURBISH 1

1 SECTIONAL AXON OF WALL3/4”=1’A01.6

same finish as exisiting

2 REFURBISHED WALL SECTION 23/4”=1’A01.6

same finish as exisiting

5"

7"

1"

2"

refurbished connection

135°

225°

24"

connection remainsthe same; into existingwall units

clean, finished edge

connection remainsthe same; into existingwall units

refurbished connection

clean, finished edge

45-1/8"

45-1/8"

48"

48"

7"

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 12, 2015

1:16 perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.6

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/10REF

A01.6–A01.6

REFURBISH 1

1 SECTIONAL AXON OF WALL3/4”=1’A01.6

same finish as exisiting

2 REFURBISHED WALL SECTION 23/4”=1’A01.6

same finish as exisiting

38

1/2"

23-3/4"

23-1/2"

flute direction

96"

48"

margin around whole sheet

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 17, 2015

1”=1’ perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.7

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/17REF

A01.7–A01.7

MAKE 20CUT 1O SHEETS – 16mm white coroplastCUT 1O SHEETS – 16mm clear coroplast

2 CNC SHEET 1”=1’A01.7

1 FLUTE DIRECTION DIAGRAMNTSA01.7

1/2"

23-3/4"

23-1/2"

flute direction

96"

48"

margin around whole sheet

DELTANAIAS 2016

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

January 6, 2016

January 11, 2016

NTM

December 17, 2015

1”=1’ perspective NTS

VENUE:COBO CENTER1 Washington Blvd.Detroit, Michigan 48226

A01.7

VERSION 1 HISTORYITEM REV

First Issue –DATE

12/17REF

A01.7–A01.7

MAKE 20CUT 1O SHEETS – 16mm white coroplastCUT 1O SHEETS – 16mm clear coroplast

2 CNC SHEET 1”=1’A01.7

1 FLUTE DIRECTION DIAGRAMNTSA01.7

40

NAIAS • JANUARY 11-24, 2016 • COBO CENTER • DETROIT, MI • LEAD DESIGNER: NTM

8

OUTER LOUNGE WITH MODIFIED WALL

Interlocking wall screen installation

visual connection to bar and coroplast wall

Delta Takeoff YouTube video

playing

Glossy black wall with 6”-8” grass feature along top face to prevent people from sittinglarge widget graphic

NAIAS • JANUARY 11-24, 2016 • COBO CENTER • DETROIT, MI • LEAD DESIGNER: NTM

9

PRIVACY SCREENS FOR CHARITY PREVIEW

Gradient in opacity to emphasize screen.

Possibly lit with up-lightsInterlocking wall

screen installation

Guests must walk behind screen, creating silhouettes as guests pass

NAIAS • JANUARY 11-24, 2016 • COBO CENTER • DETROIT, MI • LEAD DESIGNER: NTM

10

DELTA LOUNGE ENTRANCE

coat checkcall to action– Play & Enter To Win

NAIAS • JANUARY 11-24, 2016 • COBO CENTER • DETROIT, MI • LEAD DESIGNER: NTM

20

FULL LOUNGE VIEW

42

Chase US Open

As a main sponsor of the US Open, Chase has two pavilions at the Billie Jean King National Tennis Center located just outside of Arthur Ashe Stadium. In addition to the pavilions on the main grounds, Chase also sponsors the Chase Lounge, a large indoor mezzanine on the grounds. One of the outdoor pavilions served as a registration booth for the Chase Lounge. The other pavilion contains a large LED wall with a cellphone locker and charger located behind each LED unit. Upon entering simple security questions on an iPad in the pavilion, a locker with the corresponding color will illuminate signifying to the user which locker is assigned. Each locker is complete with a fully secure locking mechanism allowing for customers to leave their phones while charging. Upon returning and entering the same security questions, the LED illuminated with the corresponding color to unlock and reset the locker

Client: ChaseAgency: MKGFabrication: Pink Sparrow, Brooklyn ResearchFlushing, Queens, NY. 2015

44

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

1/2” = 1’

145 1/2"

51 1/4"93 1/8"

97 3/8"

24 1/2"

51 1/4" 52 1/4"

18"

5 3/4"

4 5/8"

10"

4 1/2"

8 1/2"

51 1/4"

97 3/8"

48 3/4" 48 3/4"

painted Chase bluePMS 300

door opens inward

17"

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

1/2” = 1’

145 1/2"

51 1/4"93 1/8"

97 3/8"

24 1/2"

51 1/4" 52 1/4"

18"

5 3/4"

4 5/8"

10"

4 1/2"

8 1/2"

51 1/4"

97 3/8"

48 3/4" 48 3/4"

painted Chase bluePMS 300

door opens inward

17"

46

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

1/2” = 1’

69 1/4" 69 1/4"

48 3/4" 48 3/4"

5"

5"

9"

97 3/8"2x width iPad charger cubbie

door opens inward

top piecepg. 4

main cubbie #1pg. 5

main cubbie inverted

*exception:both sides

slotted

*exception:not slotted

back on pg. 7slot for emergencyphone recovery

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

1/2” = 1’

69 1/4" 69 1/4"

48 3/4" 48 3/4"

5"

5"

9"

97 3/8"2x width iPad charger cubbie

door opens inward

top piecepg. 4

main cubbie #1pg. 5

main cubbie inverted

*exception:both sides

slotted

*exception:not slotted

back on pg. 7slot for emergencyphone recovery

48

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

1” = 1’

Billie Jean King Flushing Meadows -Flushing, NY 11368

96"

96"

3/4"

8 1/2"

8 1/2"

detailed onpage 9

3/4"

~ 0.50"

1.10"

0.34"

~ 0.16"

0.75"

~ 0.12"

5"

10 5/8" 5" TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP

front

fronton bottom only

scale: 1:1scale: 1:1

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

1” = 1’

Billie Jean King Flushing Meadows -Flushing, NY 11368

96"

96"

3/4"

8 1/2"

8 1/2"

detailed onpage 9

3/4"

~ 0.50"

1.10"

0.34"

~ 0.16"

0.75"

~ 0.12"

5"

10 5/8" 5" TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP TYP

front

fronton bottom only

scale: 1:1scale: 1:1

50

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

1/2” = 1’

Billie Jean King Flushing Meadows -Flushing, NY 11368

24 1/2"

4 1/2"22"

20 1/2"

24 1/2"

21" 21"

4 1/2"

145 1/2"

93"

17"

13 1/2"24"

18"

5" 3 1/2"

97 1/4"51 1/4"

door for back of housedoor swings into wall

hinges on this side

painted matte black1/8" frosted acrylic

CHASE LOUNGE LOGO

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

August 3, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

1/2” = 1’

Billie Jean King Flushing Meadows -Flushing, NY 11368

24 1/2"

4 1/2"22"

20 1/2"

24 1/2"

21" 21"

4 1/2"

145 1/2"

93"

17"

13 1/2"24"

18"

5" 3 1/2"

97 1/4"51 1/4"

door for back of housedoor swings into wall

hinges on this side

painted matte black1/8" frosted acrylic

52

TENNIS BALL INSTALLATION

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 23th, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

NOTED

Billie Jean King Flushing Meadows -Flushing, NY 11368

Wilson US Open Branded tennis balls385 quantity

cut in back for mounting

5/8" x 1-1/2" Alloy Steel Standard Dowel Pindowel detail3"=1'

tennis ball mounted detail3"=1'

mounted tennis ball elevation 1"=1'

tennis ball mounted detail1'=1' // full scale

Pattern to be released

TENNIS BALL INSTALLATION

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 23th, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

NOTED

Billie Jean King Flushing Meadows -Flushing, NY 11368

Wilson US Open Branded tennis balls385 quantity

cut in back for mounting

5/8" x 1-1/2" Alloy Steel Standard Dowel Pindowel detail3"=1'

tennis ball mounted detail3"=1'

mounted tennis ball elevation 1"=1'

tennis ball mounted detail1'=1' // full scale

Pattern to be released

54

kerfcore

CNC 3/4" Birch Boardpg. 2

3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

outlet box

3/4" Birch Boardpg. 2

[4] Non-Marking Rubber Caster2in. Threaded Stem w/ brake

3/4" Birch Boardpg. 2

3/4" Birch Boardpg. 2

kerfcore

3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 16th, 2015

NTS

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

EXPLODED AXON

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

kerfcore

CNC 3/4" Birch Boardpg. 2

3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

outlet box

3/4" Birch Boardpg. 2

[4] Non-Marking Rubber Caster2in. Threaded Stem w/ brake

3/4" Birch Boardpg. 2

3/4" Birch Boardpg. 2

kerfcore

3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

CNC 3/4" Birch Boardpg. 2

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 16th, 2015

NTS

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

EXPLODED AXON

CHASEUS OPEN 2015

Billie Jean King Flushing Meadows -Flushing, NY 11368

56

20"

18-1/2"

12-3/4"

21"

40"

20"

10"

14-1/2"

2-1/

2"

23"

96°

84°

4-1/4"

5"

2-1/2"

[4] Non-Marking Rubber Caster2in. Threaded Stem w/ brake

13" 10-1/12"

1-1/2"

1"

1"

DETAIL

18-1/2"

12-3/4" 13" 13"

SHELVES

14-1/4"

18-1/2"

UNDERSIDE PARAPET

18-1/2"

18-1/2"

18-1/2"

2-1/2"

1-1/4"

2-1/2"2-1/2"

2X

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 16th, 2015

1”=1’

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

DRAWINGS

Billie Jean King Flushing Meadows -Flushing, NY 11368

20"

18-1/2"

12-3/4"

21"

40"

20"

10"

14-1/2"

2-1/

2"

23"

96°

84°

4-1/4"

5"

2-1/2"

[4] Non-Marking Rubber Caster2in. Threaded Stem w/ brake

13" 10-1/12"

1-1/2"

1"

1"

DETAIL

18-1/2"

12-3/4" 13" 13"

SHELVES

14-1/4"

18-1/2"

UNDERSIDE PARAPET

18-1/2"

18-1/2"

18-1/2"

2-1/2"

1-1/4"

2-1/2"2-1/2"

2X

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

August 17-28rd, 2015

August 31 - Sept 13

NTM

JUNE 16th, 2015

1”=1’

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEUS OPEN 2015

DRAWINGS

Billie Jean King Flushing Meadows -Flushing, NY 11368

58

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

24

CHASE LOUNGE WELCOME BOOTH AERIAL

existing monitor bracket with new HD monitor

Atlas charging station

"Chase Lounge Information" signage

tennis ball installation // resembling the Chase Loungefood village

standing height desk with three [3] computers for BA check in

main entrance for queue

corner signage

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

25

WELCOME BOOTH ELEVATION

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

26

WELCOME BOOTH PERSPECTIVE

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

27

WELCOME BOOTH PERSPECTIVE

60

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

29

CHASE LOUNGE CHARGING BOOTH AERIAL

tech BOH

existing wall finishes and alcove lighting to be covered

food village

check in

check out

LED Charging Wall BOH access doortwo [2] stationary iPads for registration,

"Power Up" messenging

"Power Up" messenging

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

31

CHARGING BOOTH ELEVATION

velcro signage – can be swapped durning rushes

instructional and waiver text

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

32

CHARGING BOOTH PERSPECTIVE

CHASE // US OPEN // AUG 25—SEPT 8, 2014 // BJK NAT'L TENNIS CENTER // QUEENS, NY

33

CHARGING BOOTH PERSPECTIVE

62

Mobile Locker Room

The Chase Locker Room invited guests to win prizes and VIP experiences in two locations within a mobile truck unit positioned outside of MetLife Stadium and at a second footprint located in the center of the Chase Club inside the stadium. At both locations, Jets & Giants fans had the opportunity to open locker doors, which acted as a delivery mechanism to inform guests which prizes they won. To utilize the mobile locker room for both team activations, alternate team branding was designed to be interchangeable using channels to slide into position.

In 2015, the Chase Locker Room was executed at a total of 16 games and reached nearly 20,000 fans in attendance to New York Jets and New York Giants games in East Rutherford, New Jersey.

Client: ChaseAgency: MKGFabrication: Pink SparrowNew Jersey, 2015

64

INTERIOR PLAN

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1/2” = 1’

93-3/4"

12"5'-9"

5'-7"

4'-2"

centered in truck

19'-0"

8'-1 1/2"

3'-7"

3'-7"

natural maple vinyl flooring

Chase branded Podium

Team colored chalkboardprize list

wood bench wood bench

team branded carpet

ADA lockers

INTERIOR PLAN

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1/2” = 1’

93-3/4"

12"5'-9"

5'-7"

4'-2"

centered in truck

19'-0"

8'-1 1/2"

3'-7"

3'-7"

natural maple vinyl flooring

Chase branded Podium

Team colored chalkboardprize list

wood bench wood bench

team branded carpet

ADA lockers

66

LOCKER WALL

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

JETS/GIANTS CHASE CLUB

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

122"

78"

11"19-1/4"

12"

20-1/4"

25"

7" 6"19-1/4"

20-1/4"

12-1/2"

on center

one [1] row of lockerswill be covered up by wood display

12"

72"25" 25"

2-3/8"

5-1/8"

2-1/4"

same as locker mock upon opposite side

2-1/4"2-1/4"

on center

on center

on center

detailed on next page

121-3/4"

72"

steel lockers set back from wooden build

25" 25"

9-1/2"11-1/2"

12"14-3/4" 9-1/2"

36" 36"

78"

12-3/4"

2"

detailed on next page

*ALL MAPLE FINISHED WOODTO MATCH FLOORING CHOSENBY PS.

9-1/2"

le overlap for tent to adjoin to steel lockers

1/2" frameon surface

backs of lockers removed for gi application

backs of lockers removed for gi application

7-3/4" 15-3/4" 20-1/4"20-1/4" 7-3/4"

[2] Paramount Locker // 6-tier12x18x12 door assembled // grayitem #: WB269693GY // globalindustries.com

opening for helmet and merchandise

LOCKER WALL

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

JETS/GIANTS CHASE CLUB

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

122"

78"

11"19-1/4"

12"

20-1/4"

25"

7" 6"19-1/4"

20-1/4"

12-1/2"

on center

one [1] row of lockerswill be covered up by wood display

12"

72"25" 25"

2-3/8"

5-1/8"

2-1/4"

same as locker mock upon opposite side

2-1/4"2-1/4"

on center

on center

on center

detailed on next page

121-3/4"

72"

steel lockers set back from wooden build

25" 25"

9-1/2"11-1/2"

12"14-3/4" 9-1/2"

36" 36"

78"

12-3/4"

2"

detailed on next page

*ALL MAPLE FINISHED WOODTO MATCH FLOORING CHOSENBY PS.

9-1/2"

le overlap for tent to adjoin to steel lockers

1/2" frameon surface

backs of lockers removed for gi application

backs of lockers removed for gi application

7-3/4" 15-3/4" 20-1/4"20-1/4" 7-3/4"

[2] Paramount Locker // 6-tier12x18x12 door assembled // grayitem #: WB269693GY // globalindustries.com

opening for helmet and merchandise

68

LOCKERS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

93-3/4"

31-1/4" 31-1/4" 31-1/4"

37-7/8"

14-1/4" 14-1/4"

12"

10"

12"

78"

3"

29-1/4"

29-1/4"8-1/8"

detail on next page

1-1/2"

15-1/4"

fastened totruck*must be concealed

cut hole for bose mini soundstick* middle only

LOCKERS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

93-3/4"

31-1/4" 31-1/4" 31-1/4"

37-7/8"

14-1/4" 14-1/4"

12"

10"

12"

78"

3"

29-1/4"

29-1/4"8-1/8"

detail on next page

1-1/2"

15-1/4"

fastened totruck*must be concealed

cut hole for bose mini soundstick* middle only

70

LOCKER DETAILS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

3” = 1’11-1/8"

11-1/8"

1"

1-1/2"

2"

1/2"

8-1/8" 7-1/2" 8-1/8"

1"

10"

1"

2"

1"

1"

kerf for hanger placement

1" dowel or the like

10-1/2"

12"

10"

middle unit will have hole for bose mini soundstick

LOCKER DETAILS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

3” = 1’11-1/8"

11-1/8"

1"

1-1/2"

2"

1/2"

8-1/8" 7-1/2" 8-1/8"

1"

10"

1"

2"

1"

1"

kerf for hanger placement

1" dowel or the like

10-1/2"

12"

10"

middle unit will have hole for bose mini soundstick

72

ADA LOCKERS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

78"

8-5/8"

4-1/2"

72"

97-1/4"

109-1/8"

12"

3/4"

31" 31"

78-1/8"78-1/8"

72"

36"

wood in front of lockerslockers recessed 3/4"

outside dimension

72"

ADA LOCKERS

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

SEPT 2015 � JAN 2016

NTM

August 19, 2015

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

VENUE:

CHASEJETS GIANTS TRUCK

MetLife StadiumOne MetLife Stadium DriveEast Rutherford, NJ 07073

1” = 1’

78"

8-5/8"

4-1/2"

72"

97-1/4"

109-1/8"

12"

3/4"

31" 31"

78-1/8"78-1/8"

72"

36"

wood in front of lockerslockers recessed 3/4"

outside dimension

72"

74

CHASE // JETS/GIANTS TRUCK // SEPT 2015 – JAN 2016 // METLIFE STADIUM // LEAD DESIGNER: NICHOLAS TER MEER

RENDERING: CHASE CLUB GIANTS ACTIVATION

Welcome and call-to-action sign

#CHASELOCKERROOM signage

locker build to resemble locker

from truck activation

interchangable signage to resemble

truck activation

CHASE // JETS/GIANTS TRUCK // SEPT 2015 � JAN 2016 // METLIFE STADIUM // LEAD DESIGNER: NICHOLAS TER MEER

RENDERING: MOBILE LOCKER ROOM GIANTS ACTIVATION

Removable fabric skirt for concealing merchandise under truck

Giants jerseys in preapproved numbers.

Field markings graphic [not shown in rendering]

CHASE // JETS/GIANTS TRUCK // SEPT 2015 � JAN 2016 // METLIFE STADIUM // LEAD DESIGNER: NICHOLAS TER MEER

RENDERING: LOCKER ROOM INTERIOR GIANTS ACTIVATION

Blue “Chase Preferred “ Lockers Giants jerseys in preapproved

numbers.

CHASE // JETS/GIANTS TRUCK // SEPT 2015 � JAN 2016 // METLIFE STADIUM // LEAD DESIGNER: NICHOLAS TER MEER

INTERIOR SIGNAGE DETAIL: GIANTS ACTIVATION

Sliding “scoreboard” style signage allows team logos and numbers to be changed quickly.

76

Chase Sound Check

Chase Sound Check is an outreach for Chase at the Forum in Los Angeles, California. The activation allowed users to approach the van, play music which was amplified through speakers mounted on the van, with a coinsiding lightshow of LED backlit custom mounted drums. Few of the drums were lockers where customers would retrieve a prize.

Client: ChaseAgency: MKG with Steve CarusoFabrication: Pink SparrowLos Angeles, California, 2015

78

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1:25

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.1

VERSION 1 HISTORYITEM REV

First Issue –DATE

10/2REF

Z01Second Issue 1 10/10 Z01Third Issue 2 10/11 Z01

1 VAN PASSENGER SIDE KEY1:25 scaleZ01.1

10” (5)

12” (7)

14” (2)

16” (3)

18” (2)

18

18

20” (3)

20

2416

16 16 14 14

12

12

12

12

12

12

12

8

8 8

8

10

10

10

10

108

8

8

2020

24” (1) (10) PRIZE DRUMS WITH HINGE

8” (7)

masking panel with CNC cut drum holes1/4” black acrylic

1” chrome trim around cut

(5) 3.5” outdoor in-wall speakersspec by technical contractorinput panel w/ [2] 1/4” audio jacks

cut from top of existing indented shape in van exterior sheet metal

weld sliding door shutand fill door handle

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1:25

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.1

VERSION 1 HISTORYITEM REV

First Issue –DATE

10/2REF

Z01Second Issue 1 10/10 Z01Third Issue 2 10/11 Z01

1 VAN PASSENGER SIDE KEY1:25 scaleZ01.1

10” (5)

12” (7)

14” (2)

16” (3)

18” (2)

18

18

20” (3)

20

2416

16 16 14 14

12

12

12

12

12

12

12

8

8 8

8

10

10

10

10

108

8

8

2020

24” (1) (10) PRIZE DRUMS WITH HINGE

8” (7)

masking panel with CNC cut drum holes1/4” black acrylic

1” chrome trim around cut

(5) 3.5” outdoor in-wall speakersspec by technical contractorinput panel w/ [2] 1/4” audio jacks

cut from top of existing indented shape in van exterior sheet metal

weld sliding door shutand fill door handle

80

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.2

Z01.3-2 BILL OF MATERIALSITEM QTY

chrome trim

backing panel

drums

grid and shelves

1

1

30

1

REF

Z01.3

Z01.4

Z01.1

Z01.5

1” wide chrome trim around cut

drum shells, various size6” depth, mfg. by other

backing panel1/4” plexiglas2” overlap with weather seal

1” steel or aluminum grid structurevan side wall reinforcement

1INTERNAL ASSEMBLYisometric 1/2”= 1’2 Z01.2

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.2

Z01.3-2 BILL OF MATERIALSITEM QTY

chrome trim

backing panel

drums

grid and shelves

1

1

30

1

REF

Z01.3

Z01.4

Z01.1

Z01.5

1” wide chrome trim around cut

drum shells, various size6” depth, mfg. by other

backing panel1/4” plexiglas2” overlap with weather seal

1” steel or aluminum grid structurevan side wall reinforcement

1INTERNAL ASSEMBLYisometric 1/2”= 1’2 Z01.2

82

6'-0"

8"

12'-0"

6"

42"

6'-2

"

16-1/4" 35-3/4"

15-1

/2"

6-1/

2"

7°

27"

9"

2-1/

4"

8"

37-1/4"

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.3

1/2” curtain rod with black drape

to cab

rear doors

relative pitch approximatedbolt backing panel to framing

drums with doors and backing

& weld to inner grid

1/2” birch plywood or MDF shelvingpainted black

gap between shelf and drums for wiring

bolt or weld to ceiling & floor

van floor

(5) outdoor speakers, spec by tech contractorshown at ideal spacinglocate between existing wall framing

rear of van

2 DRUM WALL INTERNAL ASSEMBLY1/2” = 1”Z01.3

1 INTERIOR PERSPECTIVENTSZ01.3

6'-0"

8"

12'-0"

6"

42"

6'-2

"

16-1/4" 35-3/4"

15-1

/2"

6-1/

2"

7°

27"

9"

2-1/

4"8"

37-1/4"

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.3

1/2” curtain rod with black drape

to cab

rear doors

relative pitch approximatedbolt backing panel to framing

drums with doors and backing

& weld to inner grid

1/2” birch plywood or MDF shelvingpainted black

gap between shelf and drums for wiring

bolt or weld to ceiling & floor

van floor

(5) outdoor speakers, spec by tech contractorshown at ideal spacinglocate between existing wall framing

rear of van

2 DRUM WALL INTERNAL ASSEMBLY1/2” = 1”Z01.3

1 INTERIOR PERSPECTIVENTSZ01.3

84

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.5

12'-0"

2'-11 3/4"

17-1/4"

12-5/8"

43"

74"

1STRUCTURAL GRIDNTS Z01.5

2 STRUCTURAL GRID1/2” = 1’Z01.5

1” square tube, welded at joints

L-bracket secured to ceiling and floor

cross beams screwedto backing panel, top

will be angled

cross beams screwedto backing panel

shelf made from MDF or plywoodpainted black

CHASESOUND CHECK VAN

599 BROADWAY FL 4 NY, NYC 10012212.620.7770

INSTALL:

DATE OF EVENT:

DRAWING BY:

DRAWING DATE:

SCALE:

All materials, construction and finishes must comply with the most stringent applicable federal and local safety codes. This drawing and all the ideas, arrangements, designs and plans contained herein or represented thereby are owned and remain the property of MKG, and have been created and developed for use on, and in connection with, the project specified. Neither this drawing, nor any of such ideas, arrangements, designs or plans shall be appropriated by or disclosed to any person, firm or corporation for any use whatsoever, except by specific and written permission of MKG. Written dimensions on drawings shall have authority over scaled. Contractors and manufacturers shall verify and be responsible for all dimensions and conditions on the job, and shall inform this office of all variations from drawings prior to performing the work. This office shall first see and approve the contractor’s full-size details before any fabrication is begun. These drawings represent visual concepts and construction suggestions only. The designer and his/her employees and assistants are not qualified to determine the structural appropriateness of these designs, and will not assume responsibility for improper engineering, construction and/or handling of the scenery/structures represented herein.

October 5, 2015

December 4, 2015

NTM

October 10, 2015

1/2” = 1’

VENUE:THE FORUM3900 W Manchester BlvdInglewood, CA 90305

Z01.5

12'-0"

2'-11 3/4"

17-1/4"

12-5/8"

43"

74"

1STRUCTURAL GRIDNTS Z01.5

2 STRUCTURAL GRID1/2” = 1’Z01.5

1” square tube, welded at joints

L-bracket secured to ceiling and floor

cross beams screwedto backing panel, top

will be angled

cross beams screwedto backing panel

shelf made from MDF or plywoodpainted black

86

by Steve Caruso

For references, please contact hi@andtermeer.co

268 Monroe Street // Brooklyn, NY 11216 // 310.463.5216 // andtermeer.co

© 2016