Wg Catalog

download Wg Catalog

of 19

Transcript of Wg Catalog

WG1(800)264-9571

SERIES HYDRAULIC MOTORS

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WG

whitedriveproducts

overview

the white Drive products tradition of providing motors that excel in demanding applications continues with the wG series. WG motors provide an exceptionally solid platform for any medium-duty application where sideload may present a concern. the wG incorporates our roller Stator design which reduces friction and extends motor life. with displacements ranging from 41 - 404 cc [2.5 - 24.4 in3/rev.] and a choice of mounting, shaft, and port options, this motor is made to satisfy a variety of applications. The WG is a perfect fit when you require improved performance and long motor life at an affordable price. Applications include, but are not limited to, light to medium duty wheel drives, feed rollers, augers, brush drives, and conveyors.

Needle Roller Bearing is in optimum location to allow load to be placed as close to the center line of bearing as possible. High Pressure Buna Shaft Seal offers superior seal life and performance and eliminates the need for a case drain. Heavy-Duty Drive Link receives full flow lubrication to provide long life. Roller Stator Motor Design increases efficiency and life by using roller contact versus solid, sliding contact design. Rubber Energized Steel Face Seal does not extrude or melt under high pressure or high temperature.

key featureS

SpecificationSCODE Displacement cc [in3/rev] 040 045 060 070 090 100 130 160 200 230 320 4002

Intermittent Ratings - 10% of operation

Peak Ratings - 1% of operation

41 [2.5] 44 [2.7] 60 [3.6] 70 [4.3] 88 [5.4] 100 [6.1] 129 [7.9] 161 [9.8] 200 [12.2] 231 [14.1] 322 [19.7] 404 [24.4]

Max. Speed rpm cont. inter. 830 1020 770 760 650 520 450 350 280 220 240 175 140 940 950 810 650 570 440 350 280 330 235 185

Max. Flow lpm [gpm] cont. inter. 34 [9] 42 [11] 34 [9] 45 [12] 45 [12] 45 [12] 45 [12] 45 [12] 45 [12] 45 [12] 57 [15] 57 [15] 57 [15] 42 [11] 57 [15] 57 [15] 57 [15] 57 [15] 57 [15] 57 [15] 57 [15] 76 [20] 76 [20] 76 [20]

Max. Torque Nm [lb-in] cont. inter. 71 [630] 100 [870] 78 [685] 107 [950] 127 [1120] 162 [1430] 185 [1640] 241 [2135] 304 [2690] 379 [3350] 380 [3380] 458 [4050] 548 [4850] 108 [955] 150 [1320] 176 [1560] 224 [1985] 257 [2275] 334 [2960] 421 [3730] 525 [4650] 529 [4680] 600 [5300] 758 [6710]

Max. Pressure bar [psi] cont. inter. peak 138 [2000] 190 [2750] 207 [3000] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 138 [2000] 190 [2750] 121 [1750] 165 [2400] 103 [1500] 134 [1950] 100 [1450] 135 [1960] 207 [3000] 207 [3000] 207 [3000] 207 [3000] 207 [3000] 207 [3000] 207 [3000] 207 [3000] 200 [2900] 169 [2450] 170 [2460]

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproducts

performancePressure - bars [psi]

WGTheoretical rpm

040Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7]

35 [500]3

Max. Max. Cont. Inter. 190 138 104 69 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

Pressure - bars [psi]

060Flow - lpm [gpm] Theoretical rpm47 93 2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

35 [500]

Max. Max. Cont. Inter. 190 138 69 104 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation 32 64 145 [1280] 34 148 [1310] 94 149 [1320] 155 149 [1319] 216 147 [1304] 337 145 [1282] 459 141 [1251] 641 127 191 254 318 445 572 762 952

41 cc [2.5 in /rev.]

3 60 cc [3.6 in /rev.]

Max. Cont.

34 [9] 42 [11]

22 [198]

45 [396]

67 [595]

90 [793]

123 [1090]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Max. Inter.

45 13 29 [117] [259] [401] 4 37 25 65 48 14 31 [126] [276] [427] [577] 21 51 85 72 69 33 51 15 [134] [293] [453] [612] 113 166 144 179 71 34 52 15 [136] [299] [462] [625] 205 260 237 273 71 34 52 15 [136] [300] [464] [628] 296 354 330 368 52 71 34 15 [134] [298] [462] [626] 423 388 462 448 70 51 33 15 [129] [291] [454] [617] 609 572 650 636 50 69 14 32 [122] [283] [445] [607] 755 796 824 835 68 49 31 13 [437] [599] [276 [115] 939 982 1021 1012 Torque - Nm [lb-in], Speed rpm

96 [852] 49 98 [869] 138 99 [874] 227 98 [872] 316 97 [861] 493 96 [849] 671

186 279 372 464 650 835 1021

Max. Inter.

Max. Cont.

45 [12] 57 [15]

22 45 69 [191] [400] [608] 26 17 3 98 23 48 73 [203] [425] [648] [870] 35 14 58 49 104 24 51 78 [213] [450] [687] [924] 98 77 122 113 79 107 24 52 [214] [458] [702] [945] 162 140 187 178 80 107 24 52 [211] [458] [704] [950] 242 226 203 251 23 51 79 107 [205] [453] [700] [948] 316 306 289 265 105 49 77 21 [190] [437] [685] [932] 391 445 435 417 103 19 47 75 [170] [417] [664] [912] 517 544 572 563 99 71 15 43 [136] [384] [632] [879] 705 735 762 756 68 96 11 39 [98] [349] [599] [850] 893 926 952 949 Torque - Nm [lb-in], Speed rpm 33 [952] 65 [580] 98 [869]

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

131 180 [1159] [1594]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Pressure - bars [psi]

045Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7]

35 [500]3

Max. Max. Cont. Inter. 190 138 104 69 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

Pressure - bars [psi]

070Flow - lpm [gpm] Theoretical rpm43 86 2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

35 [500]3

Max. Max. Cont. Inter. 190 104 138 69 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

44 cc [2.7 in /rev.]

70 cc [4.3 in /rev.]

Theoretical rpm

Max. Cont.

34 [9] 42 [11]

24 [215]

49 [430]

73 [645]

97 [860]

134 [1182]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Max. Inter.

50 32 15 [131] [285] [438] 4 23 34 71 53 34 16 [140] [303] [467] [631] 47 19 66 78 76 17 36 56 [148] [322] [496] [669] 104 165 153 133 57 77 17 37 [151] [328] [506] [683] 219 189 252 240 78 57 17 37 [150] [329] [508] [687] 273 304 339 326 37 57 77 17 [147] [326] [505] [685] 413 390 358 426 76 56 16 36 [140] [318] [496] [674] 527 586 562 599 75 35 55 15 [131] [308] [485] [662] 696 770 760 734 54 74 34 14 [121] [298] [475] [652] 906 866 933 942 Torque - Nm [lb-in], Speed rpm

105 [930] 45 107 [950] 127 108 [955] 209 108 [953] 291 106 [942] 455 105 [928] 619

172 257 343 428 599 770 942

Max. Inter.

Max. Cont.

45 [12] 57 [15]

81 26 54 [231] [474] [718] 2 22 15 116 86 28 57 [244] [504] [765] [1025] 30 12 50 42 123 29 60 92 [255] [534] [812] [1090] 66 105 97 84 94 126 29 61 [256] [542] [829] [1115] 160 152 139 120 94 127 28 61 [251] [541] [831] [1121] 193 174 215 207 27 60 93 126 [243] [535] [827] [1119] 271 262 248 227 124 58 91 25 [222] [514] [807] [1100] 335 381 372 357 121 22 55 88 [196] [488] [781] [1073] 442 490 483 466 83 116 17 50 [149] [443] [736] [1030] 630 604 653 648 78 111 11 44 [96] [393] [690] [986] 765 816 813 793 Torque - Nm [lb-in], Speed rpm 38 [338] 76 [677]

28 55 170 [1507] 29 175 [1544] 81 176 [1557] 133 176 [1556] 185 174 [1539] 289 171 [1512] 393 166 [1470] 549 109 164 218 272 381 490 653 816

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

115 153 210 [1015] [1354] [1861]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39% 3

www.CenHyd.com

WG090Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

whitedriveproducts

performancePressure - bars [psi] 35 [500] Max. Max. Cont. Inter. 190 138 69 104 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation Pressure - bars [psi]

130Flow - lpm [gpm] Theoretical rpm22 44 2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

35 [500]

Max. Max. Cont. Inter. 190 138 69 104 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

3 88 cc [5.4 in /rev.]

3 129 cc [7.9 in /rev.]

Theoretical rpm

Max. Cont.

Max. Inter.

48 [426]

96 [852]

144 193 265 [1278] [1704] [2343]

Max. Inter.

57 [15]

Max. Cont.

45 [12]

34 69 104 [301] [609] [917] 17 12 2 147 36 73 110 [318] [647] [976] [1305] 24 10 39 33 157 37 77 117 [331] [684] [1036] [1388] 67 52 83 77 120 161 37 78 [331] [694] [1058] [1421] 110 95 127 121 120 162 37 78 [323] [692] [1061] [1430] 165 154 138 171 35 77 119 161 [312] [683] [1055] [1427] 215 208 197 181 158 74 116 32 [280] [654] [1028] [1402] 266 303 296 284 154 27 70 112 [242] [616] [990] [1365] 351 370 389 383 147 105 20 62 [173] [549] [925] [1301] 480 500 519 515 96 139 11 53 [94] [473] [853] [1232] 608 630 648 646 Torque - Nm [lb-in], Speed rpm

217 [1917] 23 222 [1966] 64 224 [1984] 106 224 [1984] 147 222 [1962] 230 218 [1926] 312 211 [1864] 436

87 130 173 216 303 389 519 648

45 [12] 57 [15]

52 104 155 [463] [917] [1370] 12 8 1 220 55 110 165 [487] [972] [1458] [1943] 16 7 27 23 234 57 116 175 [505] [1026] [1548] [2069] 46 36 57 53 179 240 57 118 [502] [1041] [1580] [2120] 75 65 87 82 179 241 55 117 [488] [1037] [1586] [2134] 112 105 94 116 53 115 178 241 [467] [1021] [1576] [2130] 146 142 134 123 236 110 173 47 [413] [972] [1531] [2091] 181 206 201 193 229 39 103 166 [347] [908] [1469] [2030] 239 252 265 261 217 153 26 89 [228] [792] [1355] [1919] 326 341 353 350 138 202 10 74 [89] [657] [1224] [1792] 414 429 441 440 Torque - Nm [lb-in], Speed rpm 71 [626]

15 30 322 [2851] 16 331 [2929] 44 334 [2958] 72 335 [2961] 100 331 [2929] 156 325 [2872] 213 312 [2764] 297 59 89 118 147 206 265 353 441

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

141 212 283 389 [1252] [1877] [2503] [3442]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Pressure - bars [psi]

100Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

35 [500]3

Max. Max. Cont. Inter. 190 104 138 69 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

Pressure - bars [psi]

160Flow - lpm [gpm] Theoretical rpm19 38 2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9]

35 [500]3

Max. Max. Cont. Inter. 190 104 138 69 [1000] [1500] [2000] [2750] Intermittent Ratings - 10% of Operation

100 cc [6.1 in /rev.]

161 cc [9.8 in /rev.]

Theoretical rpm

Max. Cont.

Max. Inter.

55 [486]

110 [971]

165 220 302 [1457] [1943] [2671]

Max. Inter.

57 [15]

Max. Cont.

45 [12]

119 40 79 [350] [701] [1052] 2 15 10 169 127 42 84 [369] [744] [1120] [1496] 21 9 35 29 180 43 89 134 [383] [786] [1189] [1592] 46 73 68 59 137 184 43 90 [382] [798] [1214] [1630] 112 106 97 83 138 185 42 90 [372] [795] [1218] [1641] 135 121 150 144 40 89 137 185 [358] [784] [1211] [1637] 189 183 173 158 182 85 133 36 [320] [749] [1178] [1607] 233 266 260 249 177 31 79 128 [273] [703] [1133] [1564] 308 341 336 325 119 168 21 70 [190] [622] [1053] [1485] 439 421 455 451 109 158 10 60 [93] [528] [964] [1399] 533 569 566 553 Torque - Nm [lb-in], Speed rpm

248 [2196] 20 255 [2254] 56 257 [2275] 93 257 [2276] 129 254 [2251] 201 250 [2209] 274 241 [2133] 383

76 114 152 190 266 341 455 569

45 [12] 57 [15]

195 67 131 [590] [1158] [1726] 1 9 6 276 207 70 139 [620] [1228] [1836] [2445] 13 5 21 18 294 72 146 220 [641] [1295] [1949] [2604] 29 45 42 36 225 301 72 148 [636] [1313] [1991] [2668] 69 66 60 52 226 304 70 148 [617] [1307] [1997] [2687] 84 75 93 90 67 145 224 303 [590] [1287] [1984] [2682] 117 113 107 98 297 138 218 59 [518] [1222] [1927] [2631] 145 165 161 154 288 49 128 208 [429] [1137] [1845] [2552] 191 212 209 202 191 272 31 111 [271] [982] [1693] [2404] 272 261 282 280 171 252 10 90 [85] [800] [1516] [2231] 331 353 351 343 Torque - Nm [lb-in], Speed rpm 88 [783]

12 24 405 [3585] 12 416 [3684] 35 421 [3722] 57 421 [3728] 80 417 [3688] 125 408 [3614] 170 392 [3471] 237 47 71 94 118 165 212 282 353

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

177 265 354 486 [1565] [2348] [3131] [4305]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 4 40 - 69% 0 - 39%

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproducts

performance200Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9] Max. Max. Pressure - bars [psi] Cont. Inter. 190 138 104 35 69 [500] [1000] [1500] [2000] [2750]3

WG

320Flow - lpm [gpm] Theoretical rpm10 19 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9] 45 [12]

Max. Max. Pressure Cont. Inter. bars [psi] 35 69 103 134 [500] [1000] [1500] [1950]

200 cc [12.2 in /rev.] Intermittent Ratings - 10% of Operation 243 84 164 [742] [1447] [2152] 8 5 1 259 344 88 173 [778] [1534] [2289] [3045] 17 15 10 4 275 367 91 183 [804] [1617] [2430] [3244] 37 34 29 23 376 280 90 185 [796] [1639] [2482] [3325] 56 53 48 42 378 281 87 184 [772] [1631] [2490] [3349] 75 72 67 61 378 181 280 83 [736] [1605] [2474] [3343] 94 91 86 79 371 271 172 73 [643] [1522] [2400] [3279] 133 130 124 117 359 159 259 60 [528] [1411] [2295] [3178] 171 168 163 154 337 237 137 36 [322] [1210] [2098] [2985] 228 226 220 210 211 312 110 9 [80] [973] [1865] [2758] 285 283 277 267 Torque - Nm [lb-in], Speed rpm 110 [971]

3 322 cc [19.7 in /rev.] Intermittent Ratings - 10% of Operation

Theoretical rpm

Max. Cont.

Max. Inter.

Max. Inter.

57 [15]

Max. Cont.

45 [12]

504 [4464] 10 519 [4589] 28 524 [4638] 46 525 [4646] 64 519 [4597] 101 509 [4503] 137 488 [4317] 192

38 57 76 95 133 171 228 285

57 [15] 76 [20]

283 [2501] 9 298 447 580 [2635] [3951] [5136] 21 18 15 302 456 595 [2670] [4036] [5265] 33 30 26 300 457 599 [2654] [4049] [5303] 45 42 38 295 454 598 [2610] [4021] [5291] 57 54 50 279 440 586 [2468] [3897] [5184] 81 77 73 258 420 566 [2279] [3717] [5012] 104 101 96 218 382 529 [1931] [3377] [4678] 140 136 131 171 336 483 [1517] [2970] [4277] 176 172 166 78 244 [692] [2160] 235 231 Torque - Nm [lb-in], Speed rpm 177 354 530 689 [1564] [3129] [4693] [6102] Theoretical Torque - Nm [lb-in]

145 [1280] 11 149 [1319] 23 147 [1304] 35 142 [1260] 47 135 [1199] 59 117 [1039] 82 95 [841] 106 55 [485] 142 7 [64] 177

12 24 36 48 59 83 106 142 177 236

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

219 329 439 603 [1941] [2912] [3882] [5338]

Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Overall Efficiency - 70 - 100%

40 - 69%

0 - 39%

Pressure - bars [psi]

230Flow - lpm [gpm]2 [0.5] 4 [1] 8 [2] 11 [3] 15 [4] 19 [5] 27 [7] 34 [9] 45 [12]

35 [500]3

Max. Max. Cont. Inter. 138 166 121 69 104 [1000] [1500] [1750] [2000] [2400]

400Flow - lpm [gpm] Theoretical rpm9 2 [0.5] 5 [1] 10 [3] 15 [4] 20 [5] 25 [7] 30 [8] 40 [11]

Max. Max. Pressure Cont. Inter. bars [psi] 35 70 100 135 [508] [1015] [1450] [1960]3

231 cc [14.1 in /rev.] Intermittent Ratings - 10% of Operation 190 282 [1678] [2493] 4 1 201 300 349 [1779] [2652] [3089] 13 9 7 212 318 371 [1875] [2816] [3286] 29 25 23 215 325 380 [1900] [2876] [3363] 46 42 39 382 214 326 [1890] [2885] [3382] 63 58 56 210 324 381 [1860] [2866] [3369] 79 75 72 314 372 199 [1761] [2780] [3289] 112 108 105 358 184 300 [1631] [2655] [3167] 146 141 137 157 274 332 [1393] [2422] [2936] 196 190 186 125 242 301 [1111] [2145] [2662] 245 240 236 62 181 240 [551] [1600] [2124] 328 322 317 Torque - Nm [lb-in], Speed rpm 98 [864] 7 102 [905] 15 106 [934] 32 104 [925] 48 101 [895] 65 96 [853] 82 84 [743] 115 69 [607] 148 41 [364] 197 9 [76] 247

404 cc [24.4 in /rev.] Intermittent Ratings - 10% of Operation

Theoretical rpm

Max. Cont.

Max. Inter.

76 [20]

Max. Inter.

57 [15]

398 [3526] 4 425 [3757] 20 435 [3851] 36 438 [3880] 52 438 [3872] 69 429 [3798] 101 416 [3679] 134 390 [3451] 182 359 [3180] 231

17 510 [4509] 14 523 [4631] 30 528 [4675] 46 529 [4677] 62 521 [4612] 94 508 [4498] 126 483 [4274] 174 453 [4007] 222 33

50 66 83 115 148 197 247 329

Max. Cont.

50 [12] 57 [15] 75 [20]

171 341 [1513] [3018] 3 3 210 353 537 687 [1858] [3124] [4752] [6080] 12 11 7 5 211 373 548 693 [1867] [3301] [4850] [6133] 22 18 16 13 207 386 546 732 [1832] [3416] [4832] [6478] 34 32 28 24 192 377 531 753 [1699] [3336] [4699] [6664] 45 44 37 29 188 370 545 758 [1664] [3274] [4823] [6708] 60 55 45 36 176 365 534 737 [1558] [3230] [4726] [6522] 71 69 58 49 144 327 513 719 [1274] [2894] [4540] [6363] 95 91 86 79 112 293 476 688 [991] [2593] [4212] [6088] 119 117 112 109 85 266 433 643 [752] [2354] [3832] [5690] 139 138 135 133 11 180 337 [97] [1593] [2982] 186 184 183 Torque - Nm [lb-in], Speed rpm 225 450 643 868 [1991] [3982] [5690] [7681] Theoretical Torque - Nm [lb-in]

5 12 25

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

Tested at 54C [129F] with an oil viscosity of 46cSt [213 SUS].

37 50 62 74 99 124 141 186

127 253 380 443 507 608 [1121] [2242] [3363] [3924] [4484] [5381] Theoretical Torque - Nm [lb-in] Overall Efficiency - 70 - 100% 40 - 69% 0 - 39%

Overall Efficiency - 70 - 100%

40 - 69%

0 - 39% 5

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WG

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

275 & 276 SerieS HouSinGS (4-Hole Square mount)F30 4-Hole 1/2 npt front ports101 [3.99] Max. 83 [3.28] Max. 2,7 [.105] 2,4 [.095] 82 [3.25] 80 [3.14] Max. 46 [1.80] 23 [.90] 44,4 [1.749] 44,2 [1.742] (4) 3/8-16 UNC-2B 20 [.80] Deep 95,1 [3.745] 94,7 [3.730] B

F31 4-Hole 7/8 o-ring front portsI 43 [1.70]

F38 4-Hole 1/2 BSp.f front ports

A

F26 4-Hole 3/4 o-ring end ports101 [3.99] Max. 83 [3.28] Max. 2,7 [.105] 2,4 [.095] 82 [3.25] 80 [3.14] Max. 44,4 [1.749] 44,2 [1.742] 95,1 [3.745] 94,7 [3.730] A B I 44 [1.73] 11 [.45]

(4) 3/8-16 UNC-2B 20 [.80] Deep

Bearing Curve: The bearing curve represents allowable bearing loads based on ISO 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. Radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table on page 9.-125 -100 -75 8,000 7,000445 dan [1000 lbs]

-50

-25

0

25

50

75 mm 3,500 3,000 2,500 2,000 1,500 1,000 500 danCode 040 045 060 070 090 100 130 160 200 230 320 400

LENGTH / WEIGHT CHART - DIMENSION I F30, F31, & F38 mm [in] kg [lb] 137 [5.39] 6,3 [13.9] 138 [5.43] 6,4 [14.1] 141 [5.55] 6,5 [14.3] 143 [5.63] 6,5 [14.3] 147 [5.79] 6,7 [14.7] 149 [5.87] 6,8 [15.0] 155 [6.10] 7,0 [15.4] 161 [6.34] 7,3 [16.1] 169 [6.65] 7,6 [16.7] 175 [6.89] 7,8 [17.2] 193 [7.60] 8,5 [18.7] 193 [7.60] 8,5 [18.7] F26 mm [in] 156 [6.16] 157 [6.19] 160 [6.31] 162 [6.38] 166 [6.52] 168 [6.62] 174 [6.84] 180 [7.09] 188 [7.39] 194 [7.63] 212 [8.34] 212 [8.34] kg [lb] 6,9 [15.2] 7,0 [15.3] 7,1 [15.6] 7,1 [15.7] 7,3 [16.1] 7,4 [16.3] 7,6 [16.8] 7,9 [17.3] 8,2 [18.0] 8,4 [18.5] 9,1 [20.1] 9,1 [20.1]

6,000445 dan [1000 lbs]

5,000 4,000 3,000 2,000 1,000 lb -56

Shaft

Bearing

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration.

-4

-3

-2

-1

0

1

2

3

in.

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

275 & 276 SerieS HouSinGS (Sae a mount)A10 2-Hole 1/2 npt front ports49 [1.91] Max. 53 [2.09] Max.

WG

A11 2-Hole 7/8 o-ring front portsJ

A18 2-Hole 1/2 BSp.f front ports

A68 2-Hole 1/2 BSp.f front ports with tall pilot*41 [1.60] A68 Housing - 7,1 [.278]

B 131 [5.14] 82,5 [3.249] 82,3 [3.242] 95,1 [3.745] 94,7 [3.730]

23 [.90] A

106,4 [4.189] 13,6 [.537] 13,4 [.529] NOTE: * Subtract 4,5 [.178] from this dimension for the A68 housing.

46 [1.80]

2,5 [.100]

A06 2-Hole 3/4 o-ring end ports49 [1.91] Max. 53 [2.09] Max. 2,5 [.100] J 44 [1.73] 11 [.45]

131 [5.14] 82,5 [3.249] 82,3 [3.242] 95,1 [3.745] 94,7 [3.730] A B

106,4 [4.189] 13,6 [.537] 13,4 [.529]

-125 -100 -75 8,000 7,000 6,000 5,000 4,000 3,000 2,000 1,000 lb -5 -4 -3

-50

-25

0

25

50

75 mm 3,500Code 040 045 060 070 090 100 130 160 200 230 320 400

LENGTH / WEIGHT CHART - DIMENSION J A10, A11, A17, A18 & A68 A06 mm [in] kg [lb] mm [in] kg [lb] 137 [5.39] 6,7 [14.7] 156 [6.16] 7,3 [15.9] 138 [5.43] 6,7 [14.7] 157 [6.19] 7,3 [16.0] 141 [5.55] 6,8 [15.0] 160 [6.31] 7,4 [16.3] 143 [5.63] 6,9 [15.2] 162 [6.38] 7,5 [16.4] 147 [5.79] 7,0 [15.4] 166 [6.52] 7,6 [16.8] 149 [5.87] 7,1 [15.6] 168 [6.62] 7,7 [17.0] 155 [6.10] 7,4 [16.3] 174 [6.84] 8,0 [17.5] 161 [6.34] 7,6 [16.7] 180 [7.09] 8,2 [18.0] 169 [6.65] 7,9 [17.4] 188 [7.39] 8,5 [18.7] 175 [6.89] 8,1 [17.8] 194 [7.63] 8,7 [19.2] 193 [7.60] 8,9 [19.6] 212 [8.34] 9,5 [20.8] 193 [7.60] 8,9 [19.6] 212 [8.34] 9,5 [20.8]

445 dan [1000 lbs]

3,000445 dan [1000 lbs]

2,500 2,000 1,500 1,000 500 dan 2 3 in.

Shaft

Bearing

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration.

-2

-1

0

1

NOTE: See bearing curve explanation on page 6.

DELIVERING THE POWER TO GET WORK DONE

7

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WG13,6 [.537] 13,4 [.529]

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

275 & 276 SerieS HouSinGS (wHeel mount)W30 4-Hole 1/2 npt front ports132 [4.85] Max.

W31 4-Hole 7/8 o-ring front ports33,8 [1.330] 33,5 [1.320] 25,5 [1.005] 25,3 [.995] K 37 [1.45] 8 [.33] B 49,2 [1.936] 23 [.90] 49,1 [1.933] 132 [4.85] Max. 60,3 [2.374] 46 [1.80] 60,2 [2.371]

W38 4-Hole 1/2 BSp.f front ports

19 [.73]

95,1 [3.745] 94,7 [3.730]

A

130,2 [5.125] 45

W26 4-Hole 3/4 o-ring end ports13,6 [.537] 13,4 [.529] 132 [4.85] Max.

33,8 [1.330] 33,5 [1.320] 25,5 [1.005] 25,3 [.995]

K 37 [1.45] 8 [.33] 19 [.73]

44 [1.73] 11 [.45]

95,1 [3.745] 94,7 [3.730] 132 [4.85] Max. 49,2 [1.936] 49,1 [1.933] A B

60,3 [2.374] 60,2 [2.371]

130,2 [5.125] 45

-100 -75 8,000 7,000 6,000 5,000 4,000 3,000 2,000 1,000 lb -4 -3

-50

-25

0

25

50

75

100

mm 3,500Code 040 045 060 070 090 100 130 160 200 230 320 400

LENGTH / WEIGHT CHART - DIMENSION K W30, W31, & W38 mm [in] kg [lb] 106 [4.17] 7,0 [15.4] 106 [4.17] 7,0 [15.4] 110 [4.33] 7,1 [15.6] 112 [4.41] 7,2 [15.8] 115 [4.53] 118 [4.65] 123 [4.84] 130 [5.12] 137 [5.39] 144 [5.67] 162 [6.38] 162 [6.38] 7,4 [16.3] 7,4 [16.3] 7,7 [16.9] 7,9 [17.4] 8,3 [18.3] 8,5 [18.7] 9,2 [20.2] 9,2 [20.2] W26 mm [in] kg [lb] 125 [4.93] 7,6 [16.7] 125 [4.95] 7,6 [16.8] 129 [5.07] 131 [5.15] 134 [5.29] 137 [5.39] 142 [5.61] 149 [5.86] 156 [6.16] 163 [6.40] 181 [7.11] 181 [7.11] 7,7 [17.0] 7,8 [17.2] 8,0 [17.5] 8,0 [17.7] 8,3 [18.2] 8,5 [18.8] 8,9 [19.5] 9,1 [20.0] 9,8 [21.6] 9,8 [21.6]

445 dan [1000 lbs]

3,000 2,500 2,000 1,500 1,000 500 dan

445 dan [1000 lbs]

Shaft

Bearing

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration.

-2

-1

0

1

2

3

4

in.

NOTE: See bearing curve explanation on page 6.

8

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproducts

275 & 276 SerieS SHaftS10 1 StraightMax. Torque: 655 Nm [5,800 lb-in] 26,0 [1.020] 24,6 [.970] 6,4 [.251] 6,4 [.250] 18 [.70] min. 6,4 [.25] 25,4 [.999] 25,3 [.998]

WGmounting flange 30,9 [1.218] 29,7 [1.168]

15 1 Straight extendedL 40 [1.57]* mounting flange

12 25mm StraightMax. Torque: 678 Nm [6,000 lb-in]

89 25mm Straight ModifiedL *43 [1.70]

6,4 [.251] 6,4 [.250]

8,0 [.314] 8,0 [.313]

18 [.70] min. 6 [.24] 24,99 [.9842] 24,98 [.9835]

28,2 [1.110] 28,0 [1.101]

27,8 [1.094] 27,6 [1.085]

7,0 [.277] 7,0 [.276]

5/16-18 unc NOTE: * for the 15 Shaft add 43 [1.69] to this dimension.

20

m8 x 1.25 NOTE: * for the 89 Shaft add 1 [.04] to this dimension.

20

13 1 taperedMax. Torque: 655 Nm [5,800 lb-in] L 4,8 [.189] 4,8 [.188] 25 [1.00] 4,8 [.189] 4,8 [.188] 17 [.67] 4 [.16] 19,6 [.770] 18,3 [.720] mounting flange

14 1 tapered extendedMax. Torque: 655 Nm [5,800 lb-in] L 6,4 [.251] 6,4 [.250] 31 [1.24] 6,4 [.251] 6,4 [.250] 22 [.85] 4 [.16] mounting flange 19,1 [.750] 18,3 [.720]

2,3 [.092]

25,4 [1.000]

2,7 [.105]

25,4 [1.000]

2 [.09] 3/4-28 Slotted nut 1.125 across flats Torque to 150 ft lb. 1:8 taper

2 [.09] 3/4-28 Slotted nut 1.125 across flats Torque to 150 ft lb. 1:8 taper

SHaft lenGtHSMOUNTING FLANGE TO SHAFT END - Dimension L Code 10 12 13 14 89 4-Hole Mount 45 [1.77] 49 [1.94] 56 [2.20] 61 [2.40] 51 [2.00] SAE A Mount 45 [1.77] 49 [1.94] 56 [2.20] 61 [2.40] 51 [2.00] Wheel Mount 76 [2.99] 80 [3.16] 87 [3.43] 92 [3.63] 82 [3.22] BEARING LOAD MULTIPLICATION FACTOR TABLE RPM 50 100 200 300 400 FACTOR 1.23 1.00 0.81 0.72 0.66 RPM 500 600 700 800 FACTOR 0.62 0.58 0.56 0.50

DELIVERING THE POWER TO GET WORK DONE

9

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WGSERIES STEP 1 275 276

whitedriveproducts

275 & 276 SerieS moDel coDe BuilDerDISPLACEMENT STEP 2 HOUSING STEP 3 SHAFT STEP 4 PAINT STEP 5 CAVITY STEP 6 ADD ON STEP 7 MISCELLANEOUS STEP 8

STEP 1 - Select a series Counterclockwise Rotation Clockwise Rotation

STEP 4 - Select a shaft option 10 12 13 1" Straight 25mm Straight 1 Tapered 14 15 89 1" Tapered Extended (S) 1 Straight Extended (S) 25mm Straight Modified

B

A

B

A

NOTE: The 14 & 15 shafts are for use in speed sensor motors only.

STEP 5 - Select a paint option 275 276 A B Black Black (unpainted flange face)

NOTE: For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the A port of the motor. To obtain the desired direction of shaft rotation, use the graphic at the left to determine the rotation code for the motor. For bidirectional applications, the 275 series is recommended. Preferred rotation is determined by internal valving design.

STEP 6 - Select a valve cavity option A None

STEP 2 - Select a displacement option 040 045 060 070 090 100 41 cc 44 cc 60 cc 70 cc 88 cc 100 cc [2.5 in3/rev] [2.7 in3/rev] [3.6 in3/rev] [4.3 in3/rev] [5.4 in3/rev] [6.1 in3/rev] 130 160 200 230 320 400 129 cc 161 cc 200 cc 231 cc 322 cc 404 cc [7.9 in3/rev] [9.8 in3/rev] [12.2 in3/rev] [14.1 in3/rev] [19.7 in3/rev] [24.4 in3/rev]

STEP 7 - Select an add on option A B C W X Y Z Standard Lock Nut Solid Hex Nut 4-Pin Dual Male Weatherpack Connector (S) 4-Pin M12 Dual Male Connector (S) 3-Pin Single Male Weatherpack Connector (S) 4-Pin M12 Single Male Connector (S)

STEP 3 - Select a housing option A06 A10 A11 A18 A68 F26 F30 F31 F38 2-Hole 3/4 O-Ring End Ports (S) 2-Hole 1/2 NPT Front Ports (S) 2-Hole 7/8 O-Ring Front Ports (S) 2-Hole 1/2 BSP.F Front Ports (S) 2-Hole 1/2 BSP.F Front Ports With Tall Pilot 4-Hole 3/4 O-Ring End Ports (S) 4-Hole 1/2 NPT Front Ports (S) 4-Hole 7/8 O-Ring Front Ports (S) 4-Hole 1/2 BSP.F Front Ports (S)

NOTE: (S) - STEP 3 Housings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options.

STEP 8 - Select a miscellaneous option AA AC None Freeturning Rotor

W26 4-Hole 3/4 O-Ring End Ports W30 4-Hole 1/2 NPT Front Ports W31 4-Hole 7/8 O-Ring Front Ports W38 4-Hole 1/2 BSP.F Front Ports

1(800)264-957110

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

277 & 278 SerieS HouSinGS (4-Hole Square & wHeel mountS)F30 4-Hole 1/2 npt front ports101 [3.99] Max. 83 [3.28] Max. 2,5 [.100] 82 [3.25] 80 [3.14] Max. 45,7 [1.800] 22,9 [.902] 44,4 [1.749] 44,2 [1.742] (4) 3/8-16 UNC-2B 20 [.80] Deep 95,1 [3.745] 94,7 [3.730] B

WG

F31 4-Hole 7/8 o-ring front portsI 48,3 [1.902]

A

NOTE: Dimension i and bearing curve information is located on page 6.

W31 4-Hole 7/8 o-ring front ports31,8 [1.250] 13,6 [.537] 13,4 [.529] 132 [4.85] Max. 25,4 [1.000] 8 [.33] 49,2 [1.936] 49,1 [1.933] 23 [.90] B K 37 [1.45] 19 [.73]

132 [4.85] Max.

60,3 [2.374] 60,2 [2.371]

95,1 [3.745] 94,7 [3.730]

46 [1.80]

A

130,2 [5.125] 45

19,1 [.752]

NOTE: Dimension k and bearing curve information is located on page 8.

DELIVERING THE POWER TO GET WORK DONE

11

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WG

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

277 & 278 SerieS HouSinGS (Sae a mount)A10 2-Hole 1/2 npt front ports49 [1.91] Max. 53 [2.09] Max.

A11 2-Hole 7/8 o-ring front ports48,3 [1.902] J

B 131 [5.14] 82,5 [3.249] 82,3 [3.242] 95,1 [3.745] 94,7 [3.730]

23 [.90] A

106,4 [4.189] 13,6 [.537] 13,4 [.529]

46 [1.80]

2,5 [.100]

NOTE: Dimension J and bearing curve information is located on page 7.

A17 2-Hole manifold ports48.3 [1.902] 48,3 [1.902] 63,5 [2.500] B 131 [5.14] 82,5 [3.249] 82,3 [3.242] 95,1 [3.745] 94,7 [3.730] J 14,3 [.562]

23 [.90] A

106,4 [4.189] 13,5 [.531] NOTE: Dimension J and bearing curve information is located on page 7.

46 [1.80]

2,5 [.100]

28,6 [1.125]

12

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproducts

277 & 278 SerieS SHaftS10 1 StraightMax. Torque: 655 Nm [5,800 lb-in] 26,0 [1.020] 24,6 [.970] 6,4 [.251] 6,4 [.250] 18 [.70] min. 6,4 [.25] 25,4 [.999] 25,3 [.998]

WGmounting flange 30,9 [1.218] 29,7 [1.168]

15 1 Straight extendedL 40 [1.57]* mounting flange

12 25mm StraightMax. Torque: 678 Nm [6,000 lb-in]

89 25mm Straight ModifiedL *43 [1.70]

6,4 [.251] 6,4 [.250]

8,0 [.314] 8,0 [.313]

18 [.70] min. 6 [.24] 24,99 [.9842] 24,98 [.9835]

28,2 [1.110] 28,0 [1.101]

27,8 [1.094] 27,6 [1.085]

7,0 [.277] 7,0 [.276]

5/16-18 unc NOTE: * for the 15 Shaft add 43 [1.69] to this dimension.

20

m8 x 1.25 NOTE: * for the 89 Shaft add 1 [.04] to this dimension.

20

13 1 taperedMax. Torque: 655 Nm [5,800 lb-in] L 4,8 [.189] 4,8 [.188] 25 [1.00] 4,8 [.189] 4,8 [.188] 17 [.67] 4 [.16] 19,6 [.770] 18,3 [.720] mounting flange

14 1 tapered extendedMax. Torque: 655 Nm [5,800 lb-in] L 6,4 [.251] 6,4 [.250] 31 [1.24] 6,4 [.251] 6,4 [.250] 22 [.85] 4 [.16] mounting flange 19,1 [.750] 18,3 [.720]

2,3 [.092]

25,4 [1.000]

2,7 [.105]

25,4 [1.000]

2 [.09] 3/4-28 Slotted nut 1.125 across flats Torque to 150 ft lb. 1:8 taper

2 [.09] 3/4-28 Slotted nut 1.125 across flats Torque to 150 ft lb. 1:8 taper

SHaft lenGtHSMOUNTING FLANGE TO SHAFT END - Dimension L Code 10 12 13 14 89 4-Hole Mount 45 [1.77] 49 [1.94] 56 [2.20] 61 [2.40] 51 [2.00] SAE A Mount 45 [1.77] 49 [1.94] 56 [2.20] 61 [2.40] 51 [2.00] Wheel Mount 76 [2.99] 80 [3.16] 87 [3.43] 92 [3.63] 82 [3.22]

DELIVERING THE POWER TO GET WORK DONE

13

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WGSERIES STEP 1 277 278

whitedriveproducts

277 & 278 SerieS moDel coDe BuilDerDISPLACEMENT STEP 2 HOUSING STEP 3 SHAFT STEP 4 PAINT STEP 5 CAVITY STEP 6 ADD ON STEP 7 MISCELLANEOUS STEP 8

STEP 1 - Select a series Counterclockwise Rotation Clockwise Rotation

STEP 4 - Select a shaft option 10 12 13 1" Straight 25mm Straight 1 Tapered 14 15 89 1" Tapered Extended (S) 1 Straight Extended (S) 25mm Straight Modified

B

A

B

A

NOTE: The 14 & 15 shafts are for use in speed sensor motors only.

STEP 5 - Select a paint option 277 278 A B Black Black (unpainted flange face)

NOTE: For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the A port of the motor. To obtain the desired direction of shaft rotation, use the graphic at the left to determine the rotation code for the motor. For bidirectional applications, the 277 series is recommended. Preferred rotation is determined by internal valving design.

STEP 6 - Select a valve cavity option A None

STEP 2 - Select a displacement option 040 045 060 070 090 100 41 cc 44 cc 60 cc 70 cc 88 cc 100 cc [2.5 in3/rev] [2.7 in3/rev] [3.6 in3/rev] [4.3 in3/rev] [5.4 in3/rev] [6.1 in3/rev] 130 160 200 230 320 400 129 cc 161 cc 200 cc 231 cc 322 cc 404 cc [7.9 in3/rev] [9.8 in3/rev] [12.2 in3/rev] [14.1 in3/rev] [19.7 in3/rev] [24.4 in3/rev]

STEP 7 - Select an add on option A B C W X Y Z Standard Lock Nut Solid Hex Nut 4-Pin Dual Male Weatherpack Connector (S) 4-Pin M12 Dual Male Connector (S) 3-Pin Single Male Weatherpack Connector (S) 4-Pin M12 Single Male Connector (S)

STEP 3 - Select a housing option A10 A11 A17 F30 F31 2-Hole 1/2 NPT Front Ports (S) 2-Hole 7/8 O-Ring Front Ports (S) 2-Hole Manifold Ports (S) 4-Hole 1/2 NPT Front Ports (S) 4-Hole 7/8 O-Ring Front Ports (S)

NOTE: (S) - STEP 3 Housings available for use with speed sensors. STEP 4 Shafts available for use with speed sensors. STEP 7 Speed sensor options.

STEP 8 - Select a miscellaneous option AA AC None Freeturning Rotor

W31 4-Hole 7/8 O-Ring Front Ports

14

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

280 & 281 SerieS HouSinGS (Sae a & maGneto mountS)A68 2-Hole 1/2 BSp.f aligned ports8,0 [.315] 106,4 [4.189] M

WG

B

46 [1.80] 82,6 [3.250] 82,5 [3.246]

95 [3.74]

23 [.90]

A

13,5 [.531]

48 [1.89]

m is on page 17

AC8 4-Hole 1/2 BSp.f aligned portsM 106,4 [4.189] 8,0 [.315] 13,5 [.531]

B

46 [1.80] 82,6 [3.250] 82,5 [3.246] 23 [.90] A

95 [3.74]

22.5 45

48 [1.89]

m is on page 17

AG3 4-Hole 1/2 BSp.f offset portsN 32 [1.26] 105,9 [4.169] Max. 5 [.20]

106,4 [4.189]

B

32 [1.26]

42 [1.65] 82,6 [3.250] 82,5 [3.246] 21 [.82]

95 [3.74]

A

16 [.63]

13,5 [.531] 57,3 [2.256] 56,8 [2.236]

8,0 [.315] 53 [2.09] 22 [.90]

(2) M10 x 1.5 13 [.51] Deep Min.

n is on page 17

DELIVERING THE POWER TO GET WORK DONE

15

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

WG

whitedriveproductsNOTE: Dimensions shown are without paint. Paint thickness can be up to 0,13 [.005]

280 & 281 SerieS HouSinGS (Sae a & maGneto mountS)A63 2-Hole 1/2 BSp.f offset manifold55 [2.17] 8,0 [.315] 106,4 [4.189] 20 [.79] 20 [.79] O

18 [.71] B A 18 [.71]

131 [5.16]

82,6 [3.250] 82,5 [3.246]

95 [3.74]

13,5 [.531]

16 [.63] 20 [.79] 38 [1.50] 20 [.79] 36 [1.42]

o is on page 17

AC3 4-Hole 1/2 BSp.f offset manifold55 [2.17] 106,4 [4.189] 8,0 [.315] 13,5 [.531] 20 [.79] 20 [.79] O

18 [.71] B A 18 [.71]

131 [5.16]

82,6 [3.250] 82,5 [3.246]

95 [3.74]

22.5 45

16 [.63] 20 [.79] 38 [1.50] 20 [.79] 36 [1.42]

o is on page 17

16

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

whitedriveproducts

280 & 281 SerieS tecHnical informationBearing Curve: the bearing curve represents allowable bearing loads based on ISO 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. Radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table located on page 9. Sae a & maGneto mountS-100 -75 11,000 10,000 9,000 8,000 7,000 6,000 5,000 4,000 3,000 2,000 1,000 lb -4Bearing Shaft445 dan [1000 lbs]

WG

LENGTH / WEIGHT CHART SAE A & Magneto - Dimension M Code 040 045 060 070 090 100 130 160 200 230 320 400 mm [in] 141 [5.55] 142 [5.59] 145 [5.71] 147 [5.79] 150 [5.91] 153 [6.02] 159 [6.26] 165 [6.50] 173 [6.81] 179 [7.05] 197 [7.76] 197 [7.76] kg [lb] 5,6 [12.3] 5,6 [12.3] 5,8 [12.8] 5,9 [13.0] 6,1 [13.4] 6,2 [13.6] 6,5 [14.3] 6,8 [15.0] 7,1 [15.6] 7,4 [16.3] 8,2 [18.0] 8,2 [18.0]

-50

-25

0

25

50

75

100

mm 4,500 4,000 3,500 3,000 2,500 2,000 1,500 1,000 500 dan

445 dan [1000 lbs]

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration. Add 0,03 kg [.06 lb] to motor weight for Magneto mount.

LENGTH / WEIGHT CHART Square SAE A - Dimension N Code 040 045 060 070 090 100 130 160 200 230 320 400 mm [in] 157 [6.18] 158 [6.22] 161 [6.34] 163 [6.42] 166 [6.54] 169 [6.65] 175 [6.89] 181 [7.13] 189 [7.44] 195 [7.68] 213 [8.39] 213 [8.39] kg [lb] 6,4 [14.1] 6,4 [14.1] 6,6 [14.5] 6,7 [14.7] 6,9 [15.2] 7,0 [15.4] 7,2 [15.8] 7,5 [16.5] 7,9 [17.4] 8,2 [18.0] 9,0 [19.8] 9,0 [19.8]

-3

-2

-1

0

1

2

3

4

in

SHaftS 21 32mm StraightMax. Torque: 882 Nm [7,804 lb-in] 68,3 [2.689] 58,0 [2.283] 10,0 [.394] 10,0 [.392] 18 [.71] 6[.24] 32,0 [1.261] 32,0 [1.260] 44,9 [1.768] Mounting Flange

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration.

LENGTH / WEIGHT CHART SAE A Offset Ports - Dimension O Code 040 045 060 070 090 100 130 160 200 230 320 400 mm [in] 157 [6.18] 158 [6.22] 161 [6.34] 163 [6.42] 166 [6.54] 169 [6.65] 175 [6.89] 181 [7.13] 189 [7.44] 195 [7.68] 213 [8.39] 213 [8.39] kg [lb] 6,1 [13.4] 6,2 [13.6] 6,3 [13.9] 6,4 [14.1] 6,6 [14.5] 6,7 [14.7] 7,0 [15.4] 7,3 [16.1] 7,6 [16.7] 7,9 [17.4] 8,6 [18.9] 8,6 [18.9]

35,0 [1.378] 34,8 [1.370] 8,0 [.315] 7,9 [.311]

M8 x 1.25 2.5 [.10] Snap Ring

NOTE: WG motor weights vary 0,5 kg [1 lbs] depending upon motor configuration. Add 0,14 kg [.31 lb] to motor weight for 2 Hole offset manifold 17

DELIVERING THE POWER TO GET WORK DONE

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

Important Information Before selecting or using a White Drive Products product, it is important that all information concerning the product warranty, limitation of liability and responsibility of the customer be reviewed. This information is located below. Please direct any questions regarding this information to your White Drive Products representative. Disclaimer This catalog provides product options for further investigation by customers having technical expertise with respect to the use of such products. It is the responsibility of the customer to thoroughly analyze all aspects of the customers application and to review the information concerning the product in the current product catalog. Due to the diversity of possible applications, the customer is solely responsible for making the final selection of the product(s) to be used and to assure that all performance, safety and warning requirements of the application are met. The customer is further responsible for all testing to verify acceptable life and performance of White Drive Products products under actual operating conditions.WGSERIES STEP 1 280 281

whitedriveproducts

280 & 281 SerieS moDel coDe BuilDerDISPLACEMENT STEP 2 HOUSING STEP 3

SHAFT

PAINT

CAVITY STEP 6

ADD ON STEP 7

MISCELLANEOUS STEP 8

STEP 4

STEP 5

STEP 1 - Select a series

STEP 4 - Select a shaft option 21 32mm Straight

Counterclockwise Rotation Clockwise Rotation

STEP 5 - Select a paint option A Black

B

A

B

A

B

Black (unpainted flange face)

280

281

STEP 6 - Select a valve cavity option A None

NOTE: For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the A port of the motor. To obtain the desired direction of shaft rotation, use the graphic at the left to determine the rotation code for the motor. For bi-directional applications, the 280 series is recommended. Preferred rotation is determined by internal valving design.

STEP 7 - Select an add on option A Standard

STEP 2 - Select a displacement option 41 cc 44 cc 60 cc 70 cc 88 cc [2.5 in3/rev] [2.7 in3/rev] [3.6 in3/rev] [4.3 in3/rev] [5.4 in3/rev] [6.1 in3/rev] 130 160 200 230 320 400

040 045 060 070 090 100

129 cc 161 cc 200 cc 231 cc 322 cc 404 cc

[7.9 in3/rev] [9.8 in3/rev]

STEP 8 - Select a miscellaneous option AA None

[12.2 in3/rev] [14.1 in3/rev] [19.7 in3/rev] [24.4 in3/rev]

AC

Freeturning Rotor

100 cc

STEP 3 - Select a housing option

A68

2-Hole 1/2 BSP.F Aligned Ports

AC8 4-Hole 1/2 BSP.F Aligned Ports A63

AG3 4-Hole 1/2 BSP.F Offset Ports

2-Hole 1/2 BSP.F Offset Manifold Ports

AC3 4-Hole 1/2 BSP.F Offset Manifold Ports

18

DELIVERING THE POWER TO GET WORK DONE

white Drive products has made all reasonable efforts to present accurate information in this catalog and shall not be responsible for any incorrect information which may result from unintentional oversight. Due to continuous product improvement, the product specifications as stated in this catalog are subject to change by White Drive Products at any time without notice. the customer should consult a sales representative of white Drive products for detailed information and to determine any changes in the information in this catalog. Improper selection or improper use of the products described herein can result in death, personal injury and/or property damage. White Drive Products, Inc.s sole responsibility with respect to its products is set forth in the warranty/limitation of liability policy state herein. Warranty White Drive Products products are sold subject to a limited warranty and a limitation of remedies policy, both of which constitute part of any and all agreements to purchase White Drive Products products. White Drive Products makes no other warranties or promises other than those specifically noted in its written policies, and no White Drive Products employee or agent has the power to alter those policies other than in writing.

OTHER FINE PRODUCTS AvAILABLE FROM WHITE DRIvE PRODUCTS

A COMPLETE RANGE OF LSHT HYDRAULIC MOTORS

HYDRAULIC CONTROLLED PRESSURE RELEASED BRAkES

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

www.CenHyd.com

Delivering The Power To Get Work Done.

Distributed by:

united StatesWhite Drive Products, Inc. p.o. Box 1127 Hopkinsville, KY. USA 42241 phone: +1.270.885.1110 fax: +1.270.886.8462 [email protected]

Germanywhite Drive products GmbH mannsnetterstrasse 34 D-88145 Opfenbach, Germany phone: +49.8385.924988.0 fax: +49.8385.924988.9 [email protected]

chinaWhite (China) Drive Products Co., Ltd. 1-8 ning Zhen Gong lu Zhenjiang, 212021, Jiangsu, China phone: +86 511 5729988 fax: +86 511 5728921 [email protected]

www.whitedriveproducts.com

1(800)264-9571

Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors

wG Series catalog - rev. 6.25.10

www.CenHyd.com