BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP...

843
BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide May 2006 Document Part Number: 2600-A2-GB22-50

Transcript of BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP...

  • BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide

    May 2006

    Document Part Number: 2600-A2-GB22-50

  • 2

    Zhone Technologies@Zhone Way7001 Oakport StreetOakland, CA [email protected]

    COPYRIGHT 20002005 Zhone Technologies, Inc. All rights reserved.This publication is protected by copyright law. No part of this publication may be copied, distributed, displayed, modified, transmitted, stored in a retrieval system, or translated without express written permission from Zhone Technologies, Inc.Acculink, ADSL/R, Bitstorm, Comsphere, DSL the Easy Way, Etherloop, FrameSaver, GigMux, GranDSLAM, GrandVIEW, Hotwire, the Hotwire logo, iMarc, JetFusion, Jetstream, JetVision, MALC, MVL, NextEDGE, Net to Net Technologies, Paradyne, the Paradyne logo, Quick Channel, Raptor, ReachDSL, SLMS, StormPort, TruePut, Z-Edge, Zhone, ZMS, and the Zhone logo are trademarks owned by Zhone Technologies, Inc., which may be registered in some jurisdictions.Zhone Technologies makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability, noninfringement, or fitness for a particular purpose. Further, Zhone Technologies reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of Zhone Technologies to notify any person of such revision or changes.

    End User License Agreement (Zhone and Affiliates)

    License. Zhone Technologies, Inc. and/or an affiliate ("Zhone") hereby grants you ("User")either an individual or a single business entitythe non-exclusive right to install, access, run, or interact with ("Use") one copy of the enclosed software (which may have been, or may be, provided on media, as part of a hardware platform, through download, or otherwise) and associated documentation ("Software") on the first computer system on which User installs the Software ("System") solely for internal business purposes (including, without limitation, providing products and services to User's customers) and subject to the restrictions below). Zhone may, in its sole discretion, make available future updates or upgrades to the Software each of which is also Software subject hereto. Title to and all patent rights, copyrights and other intellectual property rights in the Software are retained by Zhone and its direct and indirect suppliers and licensors ("Licensors").

    Restrictions. The Software may not be (a) Used on or from any system other than the System; (b) Used with more than any maximum number of subscribers stated in the documentation accompanying the Software; (c) Used so as to circumvent any technological measure included therein or provided by Zhone from time to time to control access to or limit use of the Software; (d) sublicensed, rented, leased or lent to third parties; (e) imported or exported into any jurisdiction except in compliance with all applicable laws of the United States and such jurisdiction; (f) transferred to a third party unless (A) User transfers the original and all surviving copies to a third party who has agreed in writing to be bound hereby and (B) such third party pays to Zhone such reasonable additional fee as Zhone may impose

    Do not install this Software unless you agree to these provisions.Return the Software promptly for a refund if you do not agree.

    BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide 2600-A2-GB22-50

    http://www.zhone.commailto:[email protected]

  • from time to time with respect to such transfer; or (g) made available to third parties as part of any time-sharing or service bureau arrangement. User shall not have the right to use the Software or any portion thereof for a use other than that contemplated by its documentation. User will not copy all or any part of the Software or attempt, or encourage or permit any third party, to modify, adapt, make derivative works from, reverse engineer, reverse compile, disassemble or decompile the Software or any portion thereof except and only to the extent that such activity is expressly permitted by law notwithstanding this limitation. Violation of any of the foregoing shall be deemed a material breach hereof. User may make a reasonable number of copies solely for archival or disaster recovery and subject to the restrictions imposed by copyright law, but may not modify or otherwise copy the Software. User agrees to reproduce product identification, copyright and other proprietary notices of Zhone and Licensors on all copies. User's rights are only as expressly stated herein. Zhone may immediately terminate your rights if you violate the provisions hereof.

    Limited Warranty. Zhone warrants that the media containing the Software is free from defects in material and workmanship for ninety (90) days following your purchase of the Software. You may provide written notice of such defect (addressed to Zhone Technologies, Inc., Attention: Customer Service, 7001 Oakport Street @ Zhone Way, Oakland, CA 94621) no later than ten (10) days following expiration of such period and, as your sole and exclusive remedy, Zhone will provide replacement media. NEITHER ZHONE NOR ITS LICENSORS MAKE ANY OTHER WARRANTY, EXPRESS, IMPLIED OR STATUTORY. ZHONE AND ITS LICENSORS DISCLAIM ALL WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE, MERCHANTABILITY AND NON-INFRINGEMENT. Some states or other jurisdictions do not allow the exclusion of implied warranties on limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from one state or jurisdiction to another.

    Limit of Liability. In case of any claim hereunder or related to the Software, neither Zhone nor its Licensors shall be liable for direct damages exceeding the price paid by User for the Software or for special, incidental, consequential or indirect damages, even if advised in advance of the potential thereof.

    U.S. Government Users. The Software is a "commercial item" as defined at 48 C.F.R. 2.101, consisting of "commercial computer software" and "commercial computer software documentation" as such terms are used in 48 C.F.R. 12.212. Under 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 to 227.7202-4, U.S. Government Users acquire the Software only with the rights set forth therein.

    Third Party Licensors. This Zhone End User License Agreement may be accompanied by differing or additional provisions applicable to portions of the Software provided by one or more Licensors ("Licensor Provisions"). User acknowledges and agrees that its Use of such portions of the Software is subject to the Licensor Provisions.

    Important Safety Instructions

    1 Read and follow all warning notices and instructions marked on the product or included in the manual.

    2 This product is intended to be used with a 3-wire grounding type plug a plug that has a grounding pin. This is a safety feature. Equipment grounding is vital to ensure safe operation. Do not defeat the purpose of the grounding type plug by modifying the plug or using an adapter. Prior to installation, use an outlet tester or a voltmeter to check the AC receptacle for the presence of earth ground. If the

    !

    2600-A2-GB22-50 BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide 3

  • 4

    receptacle is not properly grounded, the installation must not continue until a qualified electrician has corrected the problem.If a 3-wire grounding type power source is not available, consult a qualified electrician to determine another method of grounding the equipment.

    3 Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

    4 Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

    5 Do not attempt to service this product yourself, as it will void the warranty. Opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

    6 General purpose cables are described for use with this product. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer. To reduce the risk of fire, use a UL Listed or CSA Certified, minimum No. 26 AWG (0.128 mm2) telecommunication cable, or comparable cables certified for use in the country of installation.

    7 When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

    8 A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

    9 In addition, if the equipment is to be used with telecommunications circuits, take the following precautions: Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet

    locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been

    disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a

    remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak.

    10 CLASS 1 LASER PRODUCT: This product has provisions for the customer to install a Class 1 laser transciever, which provides optical coupling to the telecommunication network. Once a Class 1 laser product is installed, the equipment is to be considered to be a Class 1 Laser Product (Appareil Laser de Classe 1). The customer is responsible for selecting and installing the laser transciever and for insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825 is not exceeded after the laser transponders have been installed. Do not install laser products whose class rating is greater than 1. Refer to all important safety instructions that accompanied the transciever prior to installation. Only laser Class 1 devices, certified for use in the country of installation by the cognizant agency are to be utilized in this product.

    11 The equipment is intended for installation in a max. 50 C ambient temperature, in an environment that is free of dust and dirt.

    BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide 2600-A2-GB22-50

  • 12 The power supply cord for countries other than North America is to be a minimum H05 V V-F type, min. 0.75 mm2, 2-conductor and earth ground terminated in an IEC 320 connector on one end, and a plug which is certified for use in the country of installation at the other end.

    13 Do not physically stack more than eight (8) 26x1 units high. Physical stability has not been evaluated for stacking higher than eight units, and any configuration greater than eight may result in an unstable (tip-over) condition. Ensure that the four (4) rubber feet supplied with the product have been installed on the bottom of each unit prior to stacking any 26x1 units on top of one another.

    EMI Notices

    UNITED STATES EMI NOTICE:

    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

    The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Paradyne Corporation.

    If the equipment includes a ferrite choke or chokes, they must be installed per the installation instructions.

    CANADA EMI NOTICE:

    This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.

    Cet appareil numrique de la classe A respecte toutes les exigences du rglement sur le matrial brouilleur du Canada.

    !

    !

    2600-A2-GB22-50 BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide 5

  • 6

    Notices to Users of the Canadian Telephone Network

    NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

    NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is labeled on the equipment. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.

    When the equipment is used in a customer premises environment, a Model 6051 POTS Splitter must be used to ensure CS-03 compliance. Refer to the POTS splitter installation instructions for details.

    CE Marking

    When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Zhone World Wide Web site at www.zhone.com.

    JapanClass A ITE

    This is a Class A product based on the standard of the Voluntary Control Council for interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

    BitStorm 2600 and GranDSLAM 4200IP SNMP Reference Guide 2600-A2-GB22-50

  • Table of Contents

    Table of Contents

    Document Purpose and Intended Audience .................................................................................................... v

    Document Summary .......................................................................................................................................... v

    Product-Related Documents ............................................................................................................................ vi

    1. Introduction............................................................................................................................................................1

    1.1 Internet Society Copyright Statement.......................................................................................................1

    2. Traps .......................................................................................................................................................................2

    3. Ordered MIB List ..................................................................................................................................................8

    4. Miscellaneous Textual Conventions ...................................................................................................................11

    4.1 BITS............................................................................................................................................................124.2 ContactState ..............................................................................................................................................124.3 DateAndTime ............................................................................................................................................134.4 IpAddress ...................................................................................................................................................134.5 MacAddress ...............................................................................................................................................144.6 PerfCurrentCount....................................................................................................................................144.7 PerfIntervalCount.....................................................................................................................................144.8 PdnPPPState..............................................................................................................................................144.9 PdnTestAndIncrDerivedIndexTC...........................................................................................................154.10 PhysAddress ..............................................................................................................................................154.11 RowStatus ..................................................................................................................................................154.12 SwitchState ................................................................................................................................................164.13 TblCmd ......................................................................................................................................................164.14 TestAndIncr...............................................................................................................................................174.15 TimeInterval ..............................................................................................................................................184.16 TimeStamp.................................................................................................................................................184.17 TimeTicks ..................................................................................................................................................184.18 TruthValue ................................................................................................................................................194.19 VnidRange .................................................................................................................................................19

    5. Management Information Base (MIBs) .............................................................................................................19

    5.1 RFC1213-MIB RFC 1213....................................................................................................................205.2 SNMPv2-MIB RFC 1907.....................................................................................................................225.3 IF-MIB RFC 2863 ................................................................................................................................315.4 IP-MIB RFC 2011 ................................................................................................................................775.5 IP-FORWARD-MIB RFC 2096..........................................................................................................865.6 ENTITY-MIB (Version 2) RFC 2737.................................................................................................925.7 ENTITY-SENSOR-MIB RFC 3433 .................................................................................................1305.8 EtherLike-MIB RFC 2665.................................................................................................................137

    2600-A2-GB22-50 May 2006 i

  • Table of Contents

    5.9 MAU-MIB RFC2668..........................................................................................................................1485.10 RS-232-MIB RFC 1659......................................................................................................................1755.11 ADSL-LINE-MIB RFC 2662 ............................................................................................................1875.12 ADSL-LINE-EXT-MIB RFC 3440...................................................................................................2305.13 HDSL2-SHDSL-LINE-MIB RFC 3276............................................................................................2475.14 DS1-MIB RFC 2495 ...........................................................................................................................2825.15 ATM-MIB RFC 2515.........................................................................................................................3135.16 ATM-FORUM-SNMP-M4-MIB AF-NM-0095.001 ........................................................................3435.17 BRIDGE-MIB RFC 1493 ..................................................................................................................3475.18 P-BRIDGE-MIB RFC 2674...............................................................................................................3575.19 Q-BRIDGE-MIB RFC 2674..............................................................................................................3735.20 IGMP-STD-MIB RFC 2933 ..............................................................................................................4005.21 PPP-LCP-MIB RFC 1471 .................................................................................................................4085.22 PPP-BRIDGE-NCP-MIB RFC 1474 ................................................................................................4195.23 PDN-MPE-DEVICE-CONTROL-MIB mpe_Control.mib ............................................................4265.24 PDN-MPE-DSLAM-SYSTEM-MIB mpe_dslam.mib ....................................................................4375.25 PDN-MPE-HEALTH-AND-STATUS-MIB mpe_HealthAndStatus.mib .....................................4445.26 PDN-ADSL-LINE-EXT-MIB ................................................................................................................4465.27 PDN-ADSL-SELT-MIB..........................................................................................................................4745.28 PDN-ARP-MIB........................................................................................................................................4835.29 PDN-ATM-BRIDGE-IWF-MIB ............................................................................................................4985.30 PDN-ATMEXT-MIB ..............................................................................................................................5015.31 PDN-ATMM4EXT-MIB ........................................................................................................................5105.32 PDN-ATMSTATS-MIB..........................................................................................................................5225.33 PDN-BRIDGE-EXT-MIB ......................................................................................................................5305.34 PDN-CONFIG-MIB................................................................................................................................5395.35 PDN-CONTROL-MIB............................................................................................................................5555.36 PDN-DHCP-MIB ....................................................................................................................................5765.37 PDN-DS1CONFIG-MIB.........................................................................................................................5795.38 PDN-DS1EXT-MIB ................................................................................................................................5875.39 PDN-DOT1QEXT-MIB..........................................................................................................................5925.40 PDN-DSLAM-SYSTEM-MIB................................................................................................................5995.41 PDN-DSL-ATM-BOND-MIB ................................................................................................................6135.42 PDN-ENTITY-SENSOR-EXT-MIB......................................................................................................6415.43 PDN-ETHER-MIB..................................................................................................................................6475.44 PDN-FILTER-MIB.................................................................................................................................6535.45 PDN-HDLC-MIB ....................................................................................................................................6725.46 PDN-IFDEV-IWF-MIB ..........................................................................................................................6765.47 PDN-IF-EXT-CONFIG-MIB.................................................................................................................6805.48 PDN-IGMP-STD-EXT-MIB ..................................................................................................................6835.49 PDN-INET-MIB ......................................................................................................................................6905.50 PDN-IP-MULTICAST-MIB ..................................................................................................................6935.51 PDN-PPP-BRIDGE-NCP-EXT-MIB ....................................................................................................6965.52 PDN-PPP-LCP-EXT-MIB......................................................................................................................7005.53 PDN-PPP-ML-MIB.................................................................................................................................7145.54 PDN-PROTO-SPEC-FILTER-MIB......................................................................................................7225.55 PDN-REACHDSL-MIB..........................................................................................................................7265.56 PDN-SECURITY-MIB ...........................................................................................................................7385.57 PDN-HDSL2-SHDSL-LINE-MIB .........................................................................................................7535.58 PDN-SPECTRUMMGMT-MIB ............................................................................................................7725.59 PDN-STACKABLE-MIB .......................................................................................................................7825.60 PDN-SYSLOG-MIB................................................................................................................................7925.61 PDN-DEVICE-TIME-MIB ....................................................................................................................7965.62 PDN-UPLINK-TAGGING-MIB............................................................................................................800

    ii May 2006 2600-A2-GB22-50

  • Table of Contents

    5.63 PDN-VLAN-MIB ....................................................................................................................................807

    2600-A2-GB22-50 May 2006 iii

  • Table of Contents

    iv May 2006 2600-A2-GB22-50

  • About This Guide

    Document Purpose and Intended Audience

    This guide contains the information necessary to use Simple Network Management Protocol (SNMP) to configure and monitor the BitStorm 2600 and GranDSLAM 4200 IP DSLAMs. This document is based on firmware release 2.4.10

    Document Summary

    A master glossary of terms and acronyms used in Paradyne documents is available online at www.paradyne.com. Select Support Technical Manuals Technical Glossary.

    Section Description

    Section 1, Introduction Describes the format and contents of this document.

    Section 2, Traps Lists traps supported by the BitStorm 2600 and GranDSLAM 4200 IP DSLAMs.

    Section 3, Ordered MIB List Lists in order MIBs that must be loaded for full support.

    Section 4, Miscellaneous Textual Conventions

    Describes typographic conventions used to convey MIB constructs and object types.

    Section 5, Management Information Base (MIBs)

    Describes MIB support in the BitStorm 2600 and GranDSLAM 4200 IP DSLAMs.

    Index Lists MIBs and MIB objects for easy reference.

    2600-A2-GB22-50 May 2006 v

    http://www.paradyne.com/technical_manuals/glossary.pdf

  • Product-Related Documents

    Complete documentation for this product is available online at www.paradyne.com. Select Support Technical Manuals.

    Document Number Document Title

    2600-A2-GB21 BitStorm 2600 and GranDSLAM 4200 IP DSLAM Command Line Interface Reference

    2600-A2-GN20 BitStorm 2600 IP DSLAM Installation Guide

    4200-A2-GN21 GranDSLAM 4200 IP DSLAM Installation Guide

    vi May 2006 2600-A2-GB22-50

    http://www.paradyne.com/tech_support/hotwire_manuals.htmlhttp://www.paradyne.com/tech_support/hotwire_manuals.htmlhttp://www.paradyne.com/tech_support/hotwire_manuals.html

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    1. IntroductionThis document identifies the MIBs and MIB objects supported in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM.

    The document is arranged such that each MIB is a level 2 (x.y) heading under the Management Information Base (MIBs), Section 5, Page 19. Each MIB section has a unique header where the name of the MIB is identified on all pages applicable to that particular MIB. The MIB sections are laid out textually such that:

    The OIDs are identified for the MIB Any textual conventions defined in the MIB are identified MIB objects are listed along with their:

    object name OID syntax status support

    Something is not supported when one of the following is true:

    A whole table does not exist in the MIB tree A particular object does not exist in the MIB tree A particular enumeration for a particulare object is not available

    When a particular table or object does not exist in the MIB tree, attempted access to it by a management entity will result in a failure code of noSuchName.

    The list of MIBs that have objects supported by the BitStorm 2600 and GranDSLAM 4200 IP DSLAM can be found in the Table of Contents section of this document.

    The goal of this document is to provide all the information required to develop, test, document, and support the SNMP operation of the BitStorm 2600 and GranDSLAM 4200 IP DSLAM.

    MIB objects that have values that are not fully supported are identified by the left justified heading as Valid Object Value(s). Following this heading is a list of values supported. The absence of this heading implies that all possible values for a MIB object are supported.

    1.1 Internet Society Copyright StatementParts of RFCs have been directly copied into this document. In the words of the RFC Editor (a group funded by the Internet Society), To protect the integrity of RFC publication, all RFCs are published with an ISOC (Internet Society) copyright statement This copyright notice was designed to ensure that Request For Comments (RFC) documents will have the widest possible distribution. The copyright notice that follows should be taken to apply to all RFCs and excerpts thereof in this document. For actual copyright date, see the individual RFCs.

    Copyright (C) The Internet Society (2003). All Rights Reserved.

    This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case

    1

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

    The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.

    This document and the information contained herein is provided on an AS IS basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

    2. TrapsThis section describes the standards compliance and any special operational features/options for the SNMP Trap support. Trap Support List, Table 1 on page 3, identifies all traps supported by the BitStorm 2600 and GranDSLAM 4200 IP DSLAM.

    All Traps are sent in SNMPv1 PDU formats.

    The SNMP agent rate-limits the transmission of traps to a Trap Manager. The object, devSecuritySNMPTrapRateLimitPeriod, Section 5.56.4.12, Page 743, configures the rate-limiting period for traps.

    2

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    Table 1: Trap Support List (1 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    authenticationFailureA SNMP message was received that was not properly authenticated.

    devAuthentication-FailureIpAddress SNMPv2-MIB Section 5.2.4.3, Page 30

    warmStart Power-on reset (software reset) SNMPv2-MIBSection 5.2.4.2, Page 30

    linkDown The link is downifIndexifAdminStatusifOperStatus

    IF-MIB Section 5.3.5.1, Page 76

    linkUp The link is upifIndexifAdminStatusifOperStatus

    IF-MIB Section 5.3.5.2, Page 76

    adslAtuc-PerfLofsThreshTrap

    Loss of Framing 15-minute interval threshold reached.

    adslAtucPerfCurr15MinLofsadslAtucThresh15MinLofs ADSL-LINE-MIB

    Section 5.11.3.1.1, Page 228

    adslAtuc-PerfLossThreshTrap

    Loss of Signal 15-minute interval threshold reached.

    adslAtucPerfCurr15MinLossadslAtucThresh15MinLoss ADSL-LINE-MIB

    Section 5.11.3.1.2, Page 228

    adslAtuc-PerfESsThreshTrap

    Errored Second 15-minute interval threshold reached.

    adslAtucPerfCurr15MinESsadslAtucThresh15MinESs ADSL-LINE-MIB

    Section 5.11.3.1.4, Page 228

    adslAtuc-RateChangeTrap

    The ATUCs transmit rate has changed.

    adslAtucChanCurrTxRateadslAtucChanPrevTxRate ADSL-LINE-MIB

    Section 5.11.3.1.5, Page 229

    adslAtucPerf-LolsThreshTrap

    Loss of Link 15-minute interval threshold reached.

    adslAtucPerfCurr15MinLolsadslAtucThresh15MinLols ADSL-LINE-MIB

    Section 5.11.3.1.6, Page 229

    adslAtucInit-FailureTrap

    ATUC initialization failed. adslAtucCurrStatus ADSL-LINE-MIB

    Section 5.11.3.1.7, Page 229

    adslAturPerf-LofsThreshTrap

    Loss of Framing 15-minute interval threshold reached.

    adslAturPerfCurr15MinLofsadslAturThresh15MinLofs ADSL-LINE-MIB

    Section 5.11.3.2.1, Page 229

    adslAtur-PerfLossThreshTrap

    Loss of Signal 15-minute interval threshold reached.

    adslAturPerfCurr15MinLossadslAturThresh15MinLoss ADSL-LINE-MIB

    Section 5.11.3.2.2, Page 229

    adslAturPerf-LprsThreshTrap

    Loss of Power 15-minute interval threshold reached.

    adslAturPerfCurr15MinLprsadslAturThresh15MinLprs ADSL-LINE-MIB

    Section 5.11.3.2.3, Page 229

    adslAtur-PerfESsThreshTrap

    Errored Second 15-minute interval threshold reached.

    adslAturPerfCurr15MinESsadslAturThresh15MinESs ADSL-LINE-MIB

    Section 5.11.3.2.4, Page 229

    3

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    adslAtur-RateChangeTrap

    The ATUCs transmit rate has changed.

    adslAturChanCurrTxRateadslAturChanPrevTxRate ADSL-LINE-MIB

    Section 5.11.3.2.5, Page 229

    adslAtucSesL-ThreshTrap

    Severely errored sec-onds-line 15-minute threshold reached.

    adslAtucPerfCurr15MinSesLadslAtucThresh15MinSesL ADSL-LINE-EXT-MIB

    Section 5.12.5.1.2, Page 242

    adslAtucUasL-ThreshTrap

    Unavailable seconds-line 15-minute threshold reached.

    adslAtucPerfCurr15MinUasLadslAtucThresh15MinUasL ADSL-LINE-EXT-MIB

    Section 5.12.5.1.3, Page 242

    adslAturSesL-ThreshTrap

    Severely errored sec-onds-line 15-minute threshold reached.

    adslAturPerfCurr15MinSesLadslAturThresh15MinSesL ADSL-LINE-EXT-MIB

    Section 5.12.5.2.1, Page 243

    adslAturUasL-ThreshTrap

    Unavailable seconds-line 15-minute threshold reached.

    adslAturPerfCurr15MinUasLadslAturThresh15MinUasL ADSL-LINE-EXT-MIB

    Section 5.12.5.2.2, Page 243

    devSecurity-WebAuthenFailure

    An IP address for a Web client is not in the access control list.

    devSecurityFailedIpAddress PDN-SECURITY-MIB Section 5.56.6.1, Page 748

    devSecurity-TelnetAuthenFailure

    An IP address for a Tel-net client is not in the access control list.

    devSecurityFailedIpAddress PDN-SECURITY-MIB Section 5.56.6.2, Page 748

    dsx1LineStatus-Change

    The value of a dsx1LineStatus instance changed.

    dsx1LineStatusdxx1LineStatusLastChange DS1-MIB Section 5.14.5.1, Page 305

    hdsl2Shdsl-LoopAttenCrossing

    Loop attenuation thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-CurrAtn

    hdsl2ShdslEndpointThresh-LoopAttenuation

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.1, Page 274

    hdsl2Shdsl-SNRMarginCrossing

    SNR margin threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-CurrSnrMgn

    hdsl2ShdslEndpointThresh-SNRMargin

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.2, Page 274

    hdsl2ShdslPerf-ESThresh

    Errored seconds thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinES

    hdsl2ShdslEndpointThresh-ES

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.3, Page 274

    hdsl2ShdslPerf-SESThresh

    Severely errored seconds threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinSES

    hdsl2ShdslEndpointThresh-SES

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.4, Page 274

    Table 1: Trap Support List (2 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    4

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    hdsl2ShdslPerf-CRC-anomaliesThresh

    CRC anomalies threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinCRCanomalies

    hdsl2ShdslEndpointThresh-CRCanomalies

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.5, Page 274

    hdsl2ShdslPerf-LOSWSThresh

    SOSW seconds thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinLOSWS

    hdsl2ShdslEndpointThresh-LOSWS

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.6, Page 274

    hdsl2ShdslPerf-UASThresh

    Unavailable seconds threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinUAS

    hdsl2ShdslEndpointThresh-UAS

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.7, Page 274

    hdsl2ShdslSpan-InvalidNumRepeaers

    A mismatch has been detected between the number of repeater/regenerator units config-ured for the line and the actual number of units discovered via the EOC.

    hdsl2ShdslSpanConf-NumRepeaters

    hdsl2ShdslStatusNumAvail-Repeaters

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.8, Page 274

    hdsl2Shdsl-LoopbackFailure

    An endpoint maintenance loopback command failed for the segment.

    hdsl2ShdslMaint-LoopbackConfig

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.9, Page 274

    hdsl2Shdsl-powerBackoff

    The bit setting in the sta-tus for powerBackoff for the endpoint has been changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.10, Page 274

    hdsl2Shdsl-deviceFault

    The bit setting in the sta-tus for deviceFault for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.11, Page 275

    hdsl2Shdsl-dcContinuityFault

    The bit setting in the sta-tus for dcContinuity-Fault for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.12, Page 275

    hdsl2Shdsl-configInitFailure

    The bit setting in the sta-tus for configInitFailure for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.13, Page 275

    hdsl2Shdsl-protocolInitFailure

    The bit setting in the sta-tus for protocolInitFail-ure for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.14, Page 275

    Table 1: Trap Support List (3 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    5

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    hdsl2Shdsl-noNeighborPresent

    The bit setting in the sta-tus for noNeighborPre-sent for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    HDSL2-SHDSL-LINE-MIB

    Section 5.13.7.15, Page 275

    hdsl2Shdsl-LocalPowerLoss

    Indicates an impending unit failure due to loss of local power.

    hdsl2ShdslInvVendorID HDSL2-SHDSL-LINE-MIBSection 5.13.7.16, Page 275

    pdnDev-FileXferEvent

    A File Transfer Event, firmware or configuration occurred

    pdnDevFileXferStatus pdnDevFileXferErrorStatus pdnDevFileXferOperation pdnDevFileXferFileType pdnDevFileXferFileName pdnDevFileXferErrorStatusText

    PDN-CONTROL-MIB Section 5.35.5.5, Page 575

    mpeCcn Configuration change (rate limited) entPhysicalIndexPDN-MPE-DSLAM-SYSTEM-MIB

    Section 5.24.5.1, Page 442

    mpeSelfTest-Failure

    Sent if any portion of a restart/self start fails mpeDevSelfTestResults

    PDN-MPE-HEALTH-AND-STATUS-MIB

    Section 5.25.5.1, Page 445

    mpeAlarmRelay-InputStateChanged

    The contacts on the Alarm Relay input have change from open to closed or from closed to open.

    mpeAlarmRelayInputState PDN-MPE-DSLAM-SYSTEM-MIBSection 5.24.5.10, Page 443

    pdnEntPhySensorExtThreshold-ExceededSet

    A sensor that was previ-ously operating within a defined threshold is now operating in excess of the threshold limits.

    pdnPhySensorValue pdnEntPhySensorExt-

    ThresholdState PDN-ENTITY-SENSOR-EXT-MIBSection 5.42.5.1, Page 644

    pdnDslAtmBond-AtucRateChange

    The downstream trans-mit rate has changed.

    pdnDslAtmBondGroupIfIndex pdnDslAtmBondPerf-

    CurrAtucNetDataRate pdnDslAtmBondPerf-

    PrevAtucNetDataRate

    PDN-DSL-ATM-BOND-MIB

    Section 5.41.7.1, Page 635

    pdnDslAtmBond-AturRateChange

    The upstream transmit rate has changed.

    pdnDslAtmBondGroupIfIndex pdnDslAtmBondPerf-

    CurrAturNetDataRate pdnDslAtmBondPerf-

    PrevAturNetDataRate

    PDN-DSL-ATM-BOND-MIB

    Section 5.41.7.2, Page 635

    pdnDslAtmBond-GroupStatusChange

    The operational status of the group has changed.

    pdnDslAtmBondGroupIfIndex pdnDslAtmBondPerf-

    GroupStatus pdnDslAtmBondPerf-

    FailReason

    PDN-DSL-ATM-BOND-MIB

    Section 5.41.7.3, Page 635

    Table 1: Trap Support List (4 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    6

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    pdnEntPhySensor-ExtThreshold-ExceededCleared

    A sensor that was previ-ously operating in excess of a defined threshold is now operating within the threshold limits.

    pdnPhySensorValue pdnEntPhySensorExt-

    ThresholdState PDN-ENTITY-SENSOR-EXT-MIBSection 5.42.5.2, Page 644

    pdnHdsl2Shdsl-LoopAttenCrossing

    Loop attenuation thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-CurrAtn

    hdsl2ShdslEndpointThresh-LoopAttenuation

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.1, Page 766

    pdnHdsl2Shdsl-SNRMarginCrossing

    SNR margin threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-CurrSnrMgn

    hdsl2ShdslEndpointThresh-SNRMargin

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.2, Page 767

    pdnHdsl2ShdslPerf-ESThresh

    Errored seconds thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinES

    hdsl2ShdslEndpointThresh-ES

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.3, Page 767

    pdnHdsl2ShdslPerf-SESThresh

    Severely errored seconds threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinSES

    hdsl2ShdslEndpointThresh-SES

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.4, Page 767

    pdnHdsl2ShdslPerf-CRC-anomaliesThresh

    CRC anomalies threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinCRCanomalies

    hdsl2ShdslEndpointThresh-CRCanomalies

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.5, Page 767

    pdnHdsl2ShdslPerf-LOSWSThresh

    SOSW seconds thresh-old has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinLOSWS

    hdsl2ShdslEndpointThresh-LOSWS

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.6, Page 767

    pdnHdsl2ShdslPerf-UASThresh

    Unavailable seconds threshold has been reached or exceeded.

    hdsl2ShdslEndpoint-Curr15MinUAS

    hdsl2ShdslEndpointThresh-UAS

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.7, Page 767

    pdnHdsl2Shdsl-powerBackoff

    The bit setting in the sta-tus for powerBackoff for the endpoint has been changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.8, Page 767

    pdnHdsl2Shdsl-deviceFault

    The bit setting in the sta-tus for deviceFault for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.9, Page 767

    pdnHdsl2Shdsl-dcContinuityFault

    The bit setting in the sta-tus for dcContinuity-Fault for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.10, Page 767

    Table 1: Trap Support List (5 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    7

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    3. Ordered MIB ListThis section contains an ordered list the MIBs and their dependencies supported in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM. In other words, MIBs that are dependent on other MIBs are listed after the MIBs they are dependent on. The objective here is to list MIBs in the order in which they should be loaded in an NMS application. This list is worst case in that it contains all possible MIBs that might be required, although not all of them may be required. A lot of what is required is dependent on the needs of a particular NMS application. This list was constructed by examining the IMPORTS clause in the MIB and making sure those items MIBs identified were listed before the particular MIB that was importing them. MIBs in bold font are the MIBs containing objects implemented in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM. Those that are not in bold font are dependencies.

    pdnHdsl2Shdsl-configInitFailure

    The bit setting in the sta-tus for configInitFailure for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.11, Page 767

    pdnHdsl2Shdsl-protocolInitFailure

    The bit setting in the sta-tus for protocolInitFail-ure for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.12, Page 767

    pdnHdsl2Shdsl-noNeighborPresent

    The bit setting in the sta-tus for noNeighborPre-sent for the endpoint has changed.

    hdsl2ShdslEndpoint-CurrStatus

    PDN-HDSL2-SHDSL-LINE-MIB

    Section 5.57.5.13, Page 768

    a. The snmpTrapOID and snmpTrapEnterprise objects apply only to SNMPv2-Trap-PDUs and InformRequest-PDUs and will not be supported in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM as it those PDU types are not used to generate trap/notifica-tions.

    Table 2: Ordered MIB List (1 of 4)

    MIB RFC/File

    SNMPv2-SMI RFC 2578

    SNMPv2-CONF RFC 2580

    SNMPv2-TC RFC 2579

    SNMPv2- MIB RFC 1907

    RFC1213-MIB RFC 1213

    IANAifType-MIB http://www.iana.org/assignments/ianaiftype.mib

    PDN-HEADER-MIB pdn_Header.mib

    Table 1: Trap Support List (6 of 6)

    Trap Description VarBind(s)a MIB Cross Reference

    8

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    PDN-TC pdn_tc.mib

    SNMP-FRAMEWORK-MIB RFC 2571

    IP-MIB RFC 2011

    ENTITY-MIB RFC 2737

    ENTITY-SENSOR-MIB RFC 3433

    IF-MIB RFC 2863

    IP-FORWARD-MIB RFC 2096

    ATM-TC-MIB RFC 2514

    ATM-MIB RFC 2515

    HOST-RESOURCES-MIB RFC 2790

    ATM-FORUM-SNMP-M4-MIB af-nm-0095.001.mib

    RS-232-MIB RFC 1659

    EtherLike-MIB RFC 2665

    MAU-MIB RFC 2668

    PerfHist-TC-MIB RFC 3593

    ADSL-TC-MIB,ADSL-LINE-MIB

    RFC 2662

    ADSL-LINE-EXT-MIB RFC 3440

    BRIDGE-MIB RFC 1493

    RFC1158-MIB RFC 1158

    RFC1271-MIB RFC 1271

    RMON-MIB RFC 2819

    TOKEN-RING-RMON-MIBa RFC 1513

    RMON2-MIB RFC 2021

    P-BRIDGE-MIBQ-BRIDGE-MIB

    RFC 2674

    INET-ADDRESS-MIB RFC 2851

    IGMP-STD-MIB RFC 2933

    HDSL2-SHDSL-LINE-MIB RFC 3276

    Table 2: Ordered MIB List (2 of 4)

    MIB RFC/File

    9

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    DS1-MIB RFC 2495

    PPP-LCP-MIB RFC 1471

    PPP-BRIDGE-NCP-MIB RFC 1474

    PDN-HEADER-MIB pdn_Header.mib

    PDN-TC pdn_tc.mib

    PDN-MPE-DEVICE-CONTROL-MIB mpe_Control.mib

    PDN-MPE-HEALTH-AND-STATUS-MIB mpe_HealthAndStatus.mib

    PDN-MPE-MIB2-MIB mpe_mib2.mib

    PDN-MPE-DSLAM-SYSTEM-MIB mpe_dslam.mib

    PDN-ARP-MIB pdn_Arp.mib

    PDN-ATMSTATS-MIB pdn_AtmStats.mib

    PDN-CONFIG-MIB pdn_Config.mib

    PDN-CONTROL-MIB pdn_Control.mib

    PDN-IFEXT-MIB pdn_IfExt.mib

    PDN-IF-EXT-CONFIG-MIB pdn_IfExtConfig.mib

    PDN-SECURITY-MIB pdn_Security.mib

    PDN-DIAGNOSTICS-MIB pdn_diag.mib

    PDN-DSLAM-SYSTEM-MIB pdn_dslam.mib

    PDN-ETHER-MIB pdn_ether.mib

    PDN-FILTER-MIB pdn_filter.mib

    PDN-INET-MIB pdn_inet.mib

    PDN-SYSLOG-MIB pdn_syslog.mib

    PDN-UPLINK-TAGGING-MIB PDN-UPLINK-TAGGING-MIB.mib

    PDN-STACKABLE-MIB PDN-STACKABLE-MIB.mib

    PDN-DEVICE-TIME-MIB pdn_time.mib

    PDN-ATM-BRIDGE-IWF-MIB PDN-ATM-BRIDGE-IWF-MIB.mib

    PDN-REACHDSL-MIB pdn_reachDSL.mib

    PDN-SPECTRUMMGMT-MIB pdn_spectrummgmt.mib

    Table 2: Ordered MIB List (3 of 4)

    MIB RFC/File

    10

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    4. Miscellaneous Textual ConventionsThis sections contains Textual Conventions reference by MIBs contained in this SNMP Operational Specification, but not defined in MIBs contained in this specification.

    PDN-ATMEXT-MIB pdn_AtmExt.mib

    PDN-ATMM4EXT-MIB pdn_AtmM4Ext.mib

    PDN-ENTITY-SENSOR-EXT-MIB PDN-ENTITY-SENSOR-EXT-MIB.mib

    PDN-VLAN-MIB PDN-VLAN-MIB.mib

    PDN-IGMP-STD-EXT-MIB PDN-IGMP-STD-EXT-MIB.mib

    PDN-IP-MULTICAST-MIB PDN-IP-MULTICAST-MIB.mib

    PDN-HDSL2-SHDSL-LINE-MIB PDN-HDSL2-SHDSL-LINE-MIB.mib

    PDN-ADSL-LINE-EXT-MIB PDN-ADSL-LINE-EXT-MIB.mib

    PDN-ADSL-SELT-MIB PDN-ADSL-SELT-MIB.mib

    PDN-DOT1QEXT-MIB PDN-DOT1QEXT-MIB.mib

    PDN-DS1CONFIG-MIB pdn_Ds1Config.mib

    PDN-DS1EXT-MIB PDN-DS1EXT-MIB.mib

    PDN-DHCP-MIB PDN-DHCP-MIB.mib

    PDN-HDLC-MIB PDN-HDLC-MIB.mib

    PDN-IFDEV-IWF-MIB PDN-IFDEV-IWF-MIB.mib

    PDN-PPP-LCP-EXT-MIB PDN-PPP-LCP-EXT-MIB.mib

    PDN-PPP-BRIDGE-NCP-EXT-MIB PDN-PPP-BRIDGE-NCP-EXT-MIB.mib

    PDN-PPP-ML-MIB PDN-PPP-ML-MIB.mib

    PDN-BRIDGE-EXT-MIB PDN-BRIDGE-EXT-MIB.mib

    PDN-HEALTHANDSTATUS-MIB pdn_HealthAndStatus.mibb

    PDN-DSL-ATM-BOND-MIB PDN-DSL-ATM-BOND-MIB.mib

    a. Modified the TOKEN-RING-RMON-MIB, RFC 1513, to import the RMON-MIB instead of RFC1271-MIB as there were serious issues that would have to be worked out to get the RFC1271-MIB to compile.

    b. The PDN-HEALTHANDSTATUS-MIB exists only to support the devAuthenticationFailureIpAddress variable bind for the authenticationFailure trap/notification.

    Table 2: Ordered MIB List (4 of 4)

    MIB RFC/File

    11

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    4.1 BITSSMIv2 RFC 2578

    The BITS construct represents an enumeration of named bits. This collection is assigned non-negative, contiguous (but see below) values, starting at zero. Only those named-bits so enumerated may be present in a value.

    As part of updating an information module, for an object defined using the BITS construct, new enumerations can be added or existing enumerations can have new labels assigned to them. After an enumeration is added, it might not be possible to distinguish between an implementation of the updated object for which the new enumeration is not asserted, and an implementation of the object prior to the addition. Depending on the circumstances, such an ambiguity could either be desirable or could be undesirable. The means to avoid such an ambiguity is dependent on the encoding of values on the wire; however, one possibility is to define new enumerations starting at the next multiple of eight bits. (Of course, this can also result in the enumerations no longer being contiguous.)

    Although there is no SMI-specified limitation on the number of enumerations (and therefore on the length of a value), except as may be imposed by the limit on the length of an OCTET STRING, MIB designers should realize that there may be implementation and interoperability limitations for sizes in excess of 128 bits.

    Finally, a label for a named-number enumeration must consist of one or more letters or digits, up to a maximum of 64 characters, and the initial character must be a lower-case letter. (However, labels longer than 32 characters are not recommended.) Note that hyphens are not allowed by this specification.

    Figure 1. Encoding of BITS TC

    4.2 ContactStatePDN-TC

    This convention can be used to indicate the state of a switch, door, connector, etc. that can be by nature opened or closed.

    Syntax INTEGER

    open(1) close(2)

    0 1 2 3 4 5 6 7

    n-3 n-2 n-1

    8 9 10 11 12 13 14 15

    First Octet

    Second Octet

    Last Octet

    n bits are encoded from 0n-1 in an OCTET STRING

    12

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    4.3 DateAndTimeSNMPv2-TC RFC 2579

    A date-time specification.

    For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as:

    1992-5-26,13:30:15.0,-4:0.

    Note that if only local time is known, then time zone information (fields 8-10) is not present.

    Syntax OCTET STRING (SIZE (8 | 11))

    Display Hint The format of the display for this TC should be 2d-1d-1d,1d:1d:1d.1d,1a1d:1d, where d signifies a decimal, base 10, value.

    4.4 IpAddressSNMPv2-SMI RFC 2578

    Syntax IMPLICIT OCTET STRING (SIZE (4))

    Table 3: DateAndTime TC

    Field Octets Contents Range

    1 1-2 yeara

    a. The value of year is in network-byte order.

    065536

    2 3 month 112

    3 4 day 131

    4 5 hour 023

    5 6 minutes 0590

    6 7 seconds 060

    7 8 deci-seconds 09

    8 9 direction from UTC + / -

    9 10 hours from UTCb

    b. Daylight saving time in New Zealand is +13.

    013

    10 11 minutes from UTC 059

    13

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    4.5 MacAddressSNMPv2-TC RFC 2579

    Represents an 802 MAC address represented in the canonical order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first.

    Syntax OCTET STRING (SIZE (6))

    Display Hint 1x:, where x signifies a hexadecimal value.

    4.6 PerfCurrentCountPerfHist-TC-MIB RFC 3593

    A counter associated with a performance measurement in a current 15 minute measurement interval. The value of this counter starts from zero and is increased when associated events occur, until the end of the 15 minute interval. At that time the value of the counter is stored in the first 15 minute history interval, and the CurrentCount is restarted at zero. In the case where the agent has no valid data available for the current interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation).

    Syntax Gauge32

    4.7 PerfIntervalCountPerfHist-TC-MIB RFC 3593

    A counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval:

    discard the value of IntervalCount(n) the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 the value of IntervalCount(1) becomes that of CurrentCount the TotalCount, if supported, is adjusted.

    Syntax Gauge32

    4.8 PdnPPPStatePDN-TC pdn_tc.mib

    The state of the PPP Entity State Machine. Examples of PPP entities are Link Control Protocol (LCP), Network Control Protocol (NCP), and Multilink PPP (ML PPP).

    Reference: [RFC 1661] Simpson, W., The Point-to-Point Protocol, Section 4.2, State Transition Table, July 1994.

    Syntax INTEGER

    14

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    initial(1)

    starting(2)

    closed(3)

    stopped(4)

    closing(5)

    stopping(6)

    reqSent(7)

    ackRcvd(8)

    ackSent(9)

    opened(10)

    4.9 PdnTestAndIncrDerivedIndexTCPDN-TC pdn_tc.mib

    An index for a table entry, where a get next index object whose syntax is a TestAndIncr textual convention (Section 4.14, Page 17) is used to determine the value for the next unused index for a table entry. This syntax was chosen to correspond to the TestAndIncr textual convention.

    Syntax Integer32(02147483647)

    Display Hint The format of the display of this TC should be d, where d signifies a decimal, base 10, value.

    4.10 PhysAddressSNMPv2-TC RFC 2579

    Represents media or physical-level addresses.

    Syntax OCTET STRING

    Display Hint 1x:, where x signifies a hexadecimal value.

    4.11 RowStatusSNMPv2-TC RFC 2579

    The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the Syntax clause for the status column of a conceptual row.

    Syntax INTEGER

    active(1) - Indicates that the conceptual row is available for use by the managed device.This is a desired state that can be written and read.

    15

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    notInService(2) - Indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device. This is a desired state that can be written and read.

    notReady(3) - Indicates that the conceptual row exists in the agent, but is missing infor-mation necessary in order to be available for use by the managed device (i.e., one or more required columns in the conceptual row have not been instantiated). This is a current state and can only be read.

    createAndGo(4) - Supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. This is an action state that can be written but not read.

    createAndWait(5) - Supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device). This is an action state that can be written but not read. This state is gener-ally not supported for creating rows into tables. The createAndGo(4) state should be used to create rows in table.

    destroy(6) - Supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.

    4.12 SwitchStatePDN-TC pdn_tc.mib

    This object indicates whether an object state is enabled or disabled.

    Syntax INTEGER

    enabled(1)

    disabled(2)

    4.13 TblCmdPDN-TC pdn_tc.mib

    STATUS current

    DESCRIPTION

    This convention can be used to command a database (e.g, mib table) to perform an action (e.g, clear).

    Syntax INTEGER

    noCmd (1)

    clear (2)

    16

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    4.14 TestAndIncrSNMPv2-TC RFC 2579

    Represents integer-valued information used for atomic operations. When the management protocol is used to specify that an object instance having this syntax is to be modified, the new value supplied via the management protocol must precisely match the value presently held by the instance. If not, the management protocol set operation fails with an error of inconsistentValue. Otherwise, if the current value is the maximum value of 231-1 (2147483647 decimal), then the value held by the instance is wrapped to zero; otherwise, the value held by the instance is incremented by one. (Note that regardless of whether the management protocol set operation succeeds, the variable binding in the request and response PDUs are identical.)

    The value of the ACCESS clause for objects having this syntax is either read-write: or read-create. When an instance of a columnar object having this syntax is created, any value may be supplied via the management protocol.

    When the network management portion of the system is reinitialized, the value of every object instance having this syntax must either be incremented from its value prior to the re-initialization, or (if the value prior to the re- initialization is unknown) be set to a pseudo-randomly generated value.

    Syntax INTEGER (02147483647)

    4.14.1 TimeFilterRMON2-MIB RFC 2021

    To be used for the index to a table. Allows an application to download only those rows changed since a particular time. A row is considered changed if the value of any object in the row changes or if the row is created or deleted.

    When sysUpTime is equal to zero, this table shall be empty.

    One entry exists for each past value of sysUpTime, except that the whole table is purged should sysUpTime wrap.

    As this basic row is updated new conceptual rows are created (which still share the now updated object values with all other instances). The number of instances which are created is determined by the value of sysUpTime at which the basic row was last updated. One instance will exist for each value of sysUpTime at the last update time for the row. A new timeMark instance is created for each new sysUpTime value. Each new conceptual row will be associated with the timeMark instance which was created at the value of sysUpTime with which the conceptual row is to be associated.

    By definition all conceptual rows were updated at or after time zero and so at least one conceptual row (associated with timeMark.0) must exist for each underlying (basic) row.

    Consider the following fooTable:

    fooTable INDEX { fooTimeMark, fooIndex }FooEntry {

    fooTimeMarkTimeFilterfooIndexINTEGER,fooCountsCounter

    }

    Should there be two basic rows in this table (fooIndex == 1, fooIndex == 2) and row 1 was updated most recently at

    17

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    time 6, while row 2 was updated most recently at time 8, and both rows had been updated on several earlier occasions such that the current values were 5 and 9 respectively then the following fooCounts instances would exist.

    fooCounts.0.1 5fooCounts.0.2 9fooCounts.1.1 5fooCounts.1.2 9fooCounts.2.1 5fooCounts.2.2 9fooCounts.3.1 5fooCounts.3.2 9fooCounts.4.1 5fooCounts.4.2 9fooCounts.5.1 5fooCounts.5.2 9fooCounts.6.1 5fooCounts.6.2 9fooCounts.7.2 9 -- note that row 1 does not exist forfooCounts.8.2 9 -- times 7 and 8

    Syntax TimeTicks

    4.15 TimeIntervalA period of time, measured in units of 0.01 seconds.

    Syntax INTEGER (02147483647)

    4.16 TimeStampSNMPv2-TC RFC 2579

    The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type.

    If sysUpTime is reset to zero as a result of a reinitialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 232-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects.

    Syntax TimeTicks

    4.17 TimeTicksSMIv2 RFC 2578

    18

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceOverview

    The TimeTicks type represents a non-negative integer which represents the time, modulo 232 (4294967296 decimal), in hundredths of a second between two epochs. When objects are defined which use this ASN.1 type, the description of the object identifies both of the reference epochs.

    Syntax IMPLICIT INTEGER (04294967295)

    4.18 TruthValueSNMPv1-TC RFC 2579

    Represents a boolean value.

    Syntax INTEGER

    true(1) false(2)

    4.19 VnidRangePDN-TC pdn_tc.mib

    The valid range for VNID IDs.

    Syntax INTEGER (24000)

    5. Management Information Base (MIBs)This section describes the SNMP MIB support implemented in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM project. MIBs supported consist of both standard MIBs and Paradyne Enterprise MIBs.

    Unlike the standard MIBs, the Paradyne Enterprise MIBs change frequently. As a result, the objects listed for these MIBs in this document may be a subset of the latest version of the particular enterprise MIB. Objects that exist in the later versions but not in this document are not supported.

    19

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceRFC1213-MIB RFC 1213

    5.1 RFC1213-MIB RFC 1213

    5.1.1 IntroductionThis MIB defines objects for managing devices in TCP/IP based internets. The RFC used as a reference was dated March 1991.

    5.1.2 OIDs iso - { 1 } 1 org - { iso 3 } 1.3 dod - { org 6 } 1.3.6 internet - { dod 1 } 1.3.6.1 mgmt - { internet 2 } 1.3.6.1.2 mib-2 - { mgmt 1 } 1.3.6.1.2.1 system - { mib-2 1 } 1.3.6.1.2.1.1 interfaces - { mib-2 2 } 1.3.6.1.2.1.2 at - { mib-2 3 } 1.3.6.1.2.1.3 ip - { mib-2 4 } 1.3.6.1.2.1.4 icmp - { mib-2 5 } 1.3.6.1.2.1.5 tcp - { mib-2 6 } 1.3.6.1.2.1.6 udp - { mib-2 7 } 1.3.6.1.2.1.7 egp - { mib-2 8 } 1.3.6.1.2.1.8 cmot - { mib-2 9 } 1.3.6.1.2.1.9 transmission - { mib-2 10 } 1.3.6.1.2.1.10 snmp - { mib-2 11 } 1.3.6.1.2.1.11

    5.1.3 MIB ObjectsThe following groups supported in this MIB are as follow:

    Table 4: RFC1213-MIB Objects (1 of 2)

    Group Supported

    systema Y

    interfacesb Y

    at N

    ipc Y

    icmpc N

    tcpd N

    udpe N

    egp N

    cmot N

    20

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceRFC1213-MIB RFC 1213

    5.1.3.1 System Group This group has been updated in SNMPv2-MIB RFC 1907, Section 5.2, Page 22.

    5.1.3.2 Interfaces GroupThis group has been updated in IF-MIB RFC 2863, Section 5.3, Page 31.

    5.1.3.3 IP Group This group has been updated in IP-MIB RFC 2011IP-MIB, Section 5.4, Page 77.

    5.1.3.4 TCP GroupNot supported.

    5.1.3.5 UDP GroupNot supported.

    5.1.3.6 EGP GroupNot supported.

    5.1.3.6.1 Transmission GroupThe Transmission Group is based on the transmission media underlying each interface on a system. The objects in the Transmission Group are not defined within MIB-II, but rather through other internet-standard MIB definitions. Objects that are part of this group can be derived from the OIDs documented in the relevant RFCs. The following describes the structure to parse for in the relevant RFCs:

    type OBJECT IDENTIFIER := { transmission number }

    Where:

    type - Is the symbolic value used for the media in the ifType column of the ifTable objectSee Interfaces Group for ifType values and the ifTable object

    number - The actual integral value corresponding to the type

    5.1.3.7 SNMP GroupThis group had been updated in RFC 1907. Please refer to that section of the document for support.

    transmission Y

    snmpf Y

    a. Per RFC 1907b. Per RFC 2863c. Per RFC 2011d. Per RFC 2012e. Per RFC 2013f. Per RFC 1907

    Table 4: RFC1213-MIB Objects (2 of 2)

    Group Supported

    21

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    5.2 SNMPv2-MIB RFC 1907

    5.2.1 IntroductionThis MIB defines managed object which describe the behavior of a SNMPv2 entity. The RFC used as a reference was dated January 1996. The LAST-UPDATED for the snmp-MIB was 9511090000Z.

    5.2.2 OIDs iso - { 1 } 1 org - { iso 3 } 1.3 dod - { org 6 } 1.3.6 internet - { dod 1 } 1.3.6.1 mgmt - { internet 2 } 1.3.6.1.2 mib-2 - { mgmt 1 } 1.3.6.1.2.1 system - { mib-2 1 } 1.3.6.1.2.1.1 snmp - { mib-2 11 } 1.3.6.1.2.1.1.11

    snmpV2 - { internet 6 } 1.3.6.1.6 snmpModules - { snmpV2 3 } 1.3.6.1.6.3 snmpMIB - { snmpModules 1 } 1.3.6.1.6.3.1 snmpMIBObjects - { snmpMIB 1 } 1.3.6.1.6.3.1.1 snmpTrap - { snmpMIBObjects 4 } 1.3.6.1.6.3.1.1.4 snmpTrapOID - { snmpTrap 1 } 1.3.6.1.6.3.1.1.4.1 snmpTrapEnterprise - { snmpTrap 2 } 1.3.6.1.6.3.1.1.4.2 snmpTraps - { snmpMIBObjects 5 } 1.3.6.1.6.3.1.1.5 snmpSet - { snmpMIBObjects 6 } 1.3.6.1.6.3.1.1.6

    private - { internet 4 } 1.3.6.1.4 enterprises - { private 1 } 1.3.6.1.4.1 pdyn - { enterprises 1795 } 1.3.6.1.4.1.1795 pdn-mgmt - { pdyn 2 } 1.3.6.1.4.1.1795.2 paradyne - { pdn-mgmt 24 } 1.3.6.1.4.1.1795.2.24 pdn-common - { paradyne 2 } 1.3.6.1.4.1.1795.2.24.2 pdn-devStatus - { pdn-common 4 } 1.3.6.1.4.1.1795.2.24.2.4 devStatus - { pdn-devStatus 1 } 1.3.6.1.4.1.1795.2.24.2.4.1 devAuthenticationFailureIpAddress - { devStatus 5 } 1.3.6.1.4.1.1795.2.24.2.4.1.5

    5.2.3 MIB ObjectsThe table below identifies the objects called out in this MIB. Any table object that has elements that are supported are indicated by a Y in the Supported column.

    Table 5: SNMPv2-MIB Objects

    Object OID Supported

    system { mib-2 1 } Y

    snmp { mib-2 11 } Y

    22

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    5.2.3.1 System GroupA collection of objects common to all managed systems.

    OIDs:

    system - { mib-2 1 } 1.3.6.1.2.1.1

    5.2.3.1.1 sysDescr A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.

    Valid Object Value(s)

    This object provides the full name and version identification for the systems hardware and software. This object is set to display a string with the following format:

    Company Name1 Family2 Model Number3; S/W Release: yy.yy.yy;

    Where:

    yy.yy.yy represents the software revision number

    Table 6: System Group

    Object OID Syntax Access Status Supported

    sysDescr { system 1 } DisplayString read-only current Y

    sysObjectID { system 2 } OBJECT IDENTIFIER read-only current Y

    sysUpTime { system 3 } TimeTicks read-only current Y

    sysContact { system 4 } DisplayString(SIZE(0.32))a

    a. Product imposed limit.

    read-write current Y

    sysName { system 5 } DisplayString(SIZE(0.32))a read-write current Y

    sysLocation { system 6 } DisplayString(SIZE(0.32))a read-write current Y

    sysServices { system 7 } INTEGER(0127) read-only current Y

    sysORLastChange { system 8 } TimeStamp read-only current N

    sysORTable { system 9 } Sequence of sysOREntry not-accessible current N

    1. Company Name is set to PARADYNE. 2. The Family is BitStorm for the 26xx products and GranDSLAM for the 42xx products.3. The Model Number is 2600 for the BitStorm family products and 4200 for the GranDSLAM family

    products.

    23

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    Note: Information that is unique on a per slice basis is reported in the Entity MIB.

    5.2.3.1.2 sysObjectID The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining what kind of box is being managed. For example, if vendor Flintstones, Inc. was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Fred Router.

    Valid Object Value(s)

    Below is an OID tree for sysObjectIDs for the BitStorm 2600 and GranDSLAM 4200 IP DSLAM.

    Company Enterprise1 .1.14.17 - ip-stackable

    Company Enterprise1 .1.14.17.1 - ips-stack

    Company Enterprise1 .1.14.17.1.2 - ips-2600

    Company Enterprise1 .1.14.17.1.3 - ips-4200

    Given that the product is part of the ip-stackable family of products, but is managed independently (that is, there is no single management entity), this object will return:

    Company Enterprise OID1.1.14.17.1.2

    5.2.3.1.3 sysUpTime The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

    5.2.3.1.4 sysContact The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.

    5.2.3.1.5 sysName An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.

    Valid Object Value(s)

    Spaces are not allowed in the string.

    5.2.3.1.6 sysLocation The physical location of this node (for example, telephone closet, 3rd floor). If the location is unknown, the value is the zero-length string.

    5.2.3.1.7 sysServices A value which indicates the set of services that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs only routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly:

    1. Company Enterprise OID is set to 1.3.6.1.4.1.1795.

    24

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    For systems including OSI protocols, layers 5 and 6 may also be counted.

    Valid Object Value(s)

    The table below contains the set of services and their associated values based on the standard 2(L-1) formula. The final result for this object is 1 + 2 + 4 + 8 + 64 = 79 = 0x4F.

    5.2.3.1.8 Object Resource InformationA collection of objects which describe the SNMPv2 entity's (statically and dynamically configurable) support of various MIB modules.

    5.2.3.1.8.1 sysORLastChange The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.

    5.2.3.1.8.2 sysORTable The (conceptual) table listing the capabilities of the local SNMPv2 entity acting in an agent role with respect to various MIB modules. SNMPv2 entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.

    Index(es):

    sysORIndex

    OIDs:

    sysORTable - { system 9 } 1.3.6.1.2.1.1.9 sysOREntry - { sysORTable 1 } 1.3.6.1.2.1.1.9.1

    Table 7: sysServices

    Layer (L) Functionality Value (2(L-1)) Sum

    1 Physical 2(1-1) = 20 = 1 1

    2 Data Link / Subnetwork 2(2-1) = 21 = 2 3

    3 Internet 2(3-1) = 22 = 4 7

    4 End-to-End 2(4-1) = 23 = 8 15

    7 Application 2(7-1) = 26 = 64 79

    Table 8: sysORTable (1 of 2)

    Object OID Syntax Access Status Supported

    sysORIndex { sysOREntry 1 } INTEGER (12147483647) not-accessible current N

    25

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    5.2.3.1.8.2.1 sysORIndex The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.

    5.2.3.1.8.2.2 sysORID An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMPv2 entity acting in an agent role.

    5.2.3.1.8.2.3 sysORDescr A textual description of the capabilities identified by the corresponding instance of sysORID.

    5.2.3.1.8.2.4 sysORUpTime The value of sysUpTime at the time this conceptual row was last instantiated.

    5.2.3.2 SNMP GroupThis group is a collection of objects providing basic instrumentation and control of an SNMP entity.

    Some objects with a Status of obsolete are supported. This is to comply with a request from Technical Support.

    OIDs:

    snmp - { mib-2 11 } 1.3.6.1.2.1.1.11

    sysORID { sysOREntry 2 } OBJECT IDENTIFIER read-only current N

    sysORDescr { sysOREntry 3 } DisplayString read-only current N

    sysORUpTime { system 4 } TimeStamp read-only current N

    Table 9: SNMP Group (1 of 2)

    Object OID Syntax Access Status Supported

    snmpInPkts { snmp 1} Couner32 read-only current Y

    snmpOutPkts { snmp 2} Couner32 read-only obsolete N

    snmpInBadVersions { snmp 3} Couner32 read-only current Y

    snmpInBadCommunityNames { snmp 4} Couner32 read-only current Y

    snmpInBadCommunityUses { snmp 5 } Couner32 read-only current Y

    snmpInASNParseErrs { snmp 6 } Couner32 read-only current Y

    { snmp 7 }a

    snmpInTooBigs { snmp 8 } Counter read-only obsolete N

    Table 8: sysORTable (2 of 2)

    Object OID Syntax Access Status Supported

    26

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    5.2.3.2.1 snmpInPkts The total number of messages delivered to the SNMP entity from the transport service.

    5.2.3.2.2 snmpInBadVersions The total number of SNMP messages which were delivered to the SNMP entity and were for an unsupported SNMP

    snmpInNoSuchNames { snmp 9 } Counter read-only obsolete N

    snmpInBadValues { snmp 10 } Counter read-only obsolete N

    snmpInReadOnlys { snmp 11 } Counter read-only obsolete N

    snmpInGenErrs { snmp 12 } Counter read-only obsolete N

    snmpInTotalReqVars { snmp 13 } Counter read-only obsolete N

    snmpInTotalSetVars { snmp 14 } Counter read-only obsolete N

    snmpInGetRequests { snmp 15 } Counter read-only obsolete Y

    snmpInGetNexts { snmp 16 } Counter read-only obsolete Y

    snmpInSetRequests { snmp 17 } Counter read-only obsolete Y

    snmpInGetResponses { snmp 18 } Counter read-only obsolete N

    snmpInTraps { snmp 19 } Counter read-only obsolete N

    snmpOutTooBigs { snmp 20 } Counter read-only obsolete N

    snmpOutNoSuchNames { snmp 21 } Counter read-only obsolete N

    snmpOutBadValues { snmp 22 } Counter read-only obsolete N

    { snmp 23 }a

    snmpOutGenErrs { snmp 24 } Counter read-only obsolete N

    snmpOutGetRequests { snmp 25 } Counter read-only obsolete N

    snmpOutGetNexts { snmp 26 } Counter read-only obsolete N

    snmpOutSetRequests { snmp 27 } Counter read-only obsolete N

    snmpOutGetResponses { snmp 28 } Counter read-only obsolete Y

    snmpOutTraps { snmp 29 } Counter read-only obsolete Y

    snnpEnableAuthenTraps { snmp 30 } INTEGERenabled(1)disabled(2)

    read-write current Y

    snmpSilentDrops { snmp 31 } Couner32 read-only current Y

    snmpProxyDrops { snmp 31 } Couner32 read-only current Y

    a. This OID is not used.

    Table 9: SNMP Group (2 of 2)

    Object OID Syntax Access Status Supported

    27

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    version.

    5.2.3.2.3 snmpInBadCommunityNames The total number of SNMP messages delivered to the SNMP entity which used a SNMP community name not known to said entity.

    5.2.3.2.4 snmpInBadCommunityUses The total number of SNMP messages delivered to the SNMP entity which represented an SNMP operation which was not allowed by the SNMP community named in the message.

    5.2.3.2.5 snmpInASNParseErrs The total number of ASN.1 or BER errors encountered by the SNMP entity when decoding received SNMP messages.

    5.2.3.2.6 snmpEnableAuthenTraps Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled.

    Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system.

    This object can take on the following values:

    enabled(1) disabled(2)

    5.2.3.2.7 snmpSilentDrops The total number of GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response-PDU with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.

    5.2.3.2.8 snmpProxyDrops The total number of GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response-PDU could be returned.

    5.2.3.3 Set GroupThis group is a collection of objects which allow several cooperating SNMPv2 entities, all acting in a manager role, to coordinate their use of the SNMPv2 set operation.

    OIDs:

    snmpSet - { snmpMIBObjects 6 } 1.3.6.1.6.3.1.1.6

    28

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    5.2.3.3.1 snmpSetSerialNoAn advisory lock used to allow several cooperating SNMPv2 entities, all acting in a manager role, to coordinate their use of the SNMPv2 set operation.

    This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.

    5.2.4 TrapsThis section defines a collection of objects which allow the SNMPv2 entity, when acting in an agent role, to be configured to generate SNMPv2-Trap-PDUs. Note that the BitStorm 2600 and GranDSLAM 4200 IP DSLAM send all traps as SNMPv1 PDUs (reference Traps, Section 2, Page 2).

    The snmpTrapOID is the authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.

    The snmpTrapEnterprise is the authoritative identification of the enterprise associated with the trap currently being sent. When a SNMPv2 proxy agent is mapping an RFC 1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.

    OIDs:

    snmpTraps - { snmpMIBObjects 5 } 1.3.6.1.6.3.1.1.5

    5.2.4.1 coldStartA coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself and that its

    Table 10: Set Group

    Object OID Syntax Access Status Supported

    snmpSetSerialNo { snmpSet 1} TestAndIncr read-write current N

    Table 11: SNMPv2-MIB Traps

    Notification OID Variable Bindings / Objectsa

    a. The snmpTrapOID and snmpTrapEnterprise objects apply only to SNMPv2-Trap-PDUs and InformRequest-PDUs and will not be supported in the BitStorm 2600 and GranDSLAM 4200 IP DSLAM as it those PDU types are not used to generate trap/notifications.

    Status Supported

    coldStart { snmpTraps 1} current N

    warmStart { snmpTraps 2} current Y

    authenticationFailure { snmpTraps 5} devAuthenticationFailureIpAddress current Y

    29

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceSNMPv2-MIB RFC 1907

    configuration may have been altered.

    5.2.4.2 warmStartA warmStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself such that its configuration is unaltered.

    5.2.4.3 authenticationFailure An authenticationFailure trap signifies that the SNMPv2 entity, acting in an agent role, has received a protocol message that is not properly authenticated. While all implementations of the SNMPv2 must be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap is generated.

    5.2.4.3.1 devAuthenticationFailureIpAddressThe following is an excerpt from the PDN-HEALTHANDSTATUS-MIB, pdn_HealthAndStatus.mib:

    Authentication Failure Ip Address is used when a authenticationFailure trap is generated. The single varbind rep-resents the ip address causing the error. If the ip address is not known, 0.0.0.0 is used.

    OID:

    devAuthenticationFailureIpAddress - { devStatus 5 } 1.3.6.1.4.1.1795.2.24.2.4.1.5

    Syntax:

    IpAddress

    Access:

    read-only

    Status:

    mandatory

    30

  • BitStorm 2600 and GranDSLAM 4200 IP DSLAM SNMP ReferenceIF-MIB RFC 2863

    5.3 IF-MIB RFC 2863

    5.3.1 IntroductionThis MIB describes objects for managing interfaces. The RFC used as a reference was dated June 2000. The LAST-UPDATED for the IF-MIB was 200006140000Z.

    Figure 2, Interface Diagram, page 33, depicts the interfaces excluding those that exist on the Management and Uplink Interface Module (MAUI). Figure 3, GigE MAUI, page 34, depicts the interfaces that exist on the GigE MAUI. Figure 4, T1/E1 ML PPP MAUI, page 35 depicts the interfaces that exist on the T1/E1 ML PPP MAUI. In these figures, there are three-digit number after the port name. These three-digit numbers represent the Port/Interface Number for the particular port from Table 16, ifIndex, page 41. Table 12, Interface List, page 31 lists all the interfaces.

    The T1/E1 ML PPP Uplink MAUI, Figure 4, page 35, supports up to 8 multilink PPP bundles. However, typically there will be multiple T1/E1 port assigned to a multilink PPP bundle and multiple bundles are supported.

    Table 12: Interface List (1 of 2)

    Interface Quantity Figure Label

    Console Port 1 per Chassis Console

    Ethernet Port 1 (10/100 Base T) 1 per Chassis Eth1