2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ......

402
2014 Infiniti Q50 Hybrid Owner’s Manual For your safety, read carefully and keep in this vehicle.

Transcript of 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ......

Page 1: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2014 Infiniti Q50 Hybrid Owner’s Manual

Prin

ting

: Jun

e 20

13 (0

1) /

OM

14E

HV

37U

0 /

Pri

nted

in U

.S.A

.

For your safety, read carefully and keep in this vehicle.2014 Infiniti Q50 H

ybrid

Page 2: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Your INFINITI represents a new way ofthinking about vehicle design. It integratesadvanced engineering and superior crafts-manship with a simple, refined aestheticsensitivity associated with traditional Ja-panese culture.

The result is a different notion of luxuryand beauty. The car itself is important, butso is the sense of harmony that the vehicleevokes in its driver, and the sense ofsatisfaction you feel with the INFINITI —

from the way it looks and drives to the highlevel of retailer service.

To ensure that you enjoy your INFINITI tothe fullest, we encourage you to read thisOwner’s Manual immediately. It explainsall of the features, controls and perfor-mance characteristics of your INFINITI; italso provides important instructions andsafety information.

A separate Warranty Information Bookletis included in your Owner’s literatureportfolio. The INFINITI Service and Main-tenance Guide explains details aboutmaintaining and servicing your vehicle.Always carry it with you when you takeyour vehicle to an INFINITI retailer. TheWarranty Information Booklet contentsprovide complete information about all

warranties covering this vehicle, the re-quirements to keep the warranties in effectas well as the INFINITI Roadside Assis-tance program.

Additionally, a separate Customer Careand Lemon Law Information Booklet willexplain how to resolve any concerns youmay have with your vehicle, as well asclarify your rights under your state’slemon law.

In addition to factory installed options,your vehicle may also be equipped withadditional accessories installed by INFINITIor by your INFINITI retailer prior to delivery.It is important that you familiarize yourselfwith all disclosures, warnings, cautionsand instructions concerning proper use ofsuch accessories prior to operating thevehicle and/or accessory. See an INFINITIretailer for details concerning the particu-lar accessories with which your vehicle isequipped.

READ FIRST — THEN DRIVE SAFELYBefore driving your vehicle, read yourOwner’s Manual carefully. This will ensurefamiliarity with controls and maintenancerequirements, assisting you in the safeoperation of your vehicle.

WARNING

IMPORTANT SAFETY INFORMATION REMIN-DERS FOR SAFETY!

Follow these important driving rules to helpensure a safe and comfortable trip for youand your passengers!

. NEVER drive under the influence ofalcohol or drugs.

. ALWAYS observe posted speed limitsand never drive too fast for conditions.

. ALWAYS give your full attention todriving and avoid using vehicle featuresor taking other actions that could dis-tract you.

. ALWAYS use your seat belts and appro-priate child restraint systems. Pre-teenchildren should be seated in the rearseat.

Foreword

Page 3: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. ALWAYS provide information about theproper use of vehicle safety features toall occupants of the vehicle.

. ALWAYS review this Owner’s Manual forimportant safety information.

MODIFICATION OF YOUR VEHICLEThis vehicle should not be modified.Modification could affect its performance,safety or durability, and may even violategovernmental regulations. In addition,damage or performance problems result-ing from modification will not be coveredunder the INFINITI warranties.

WHEN READING THE MANUALThis manual includes information for alloptions available on this model. Therefore,you may find some information that doesnot apply to your vehicle.

All information, specifications and illustra-tions in this manual are those in effect atthe time of printing. INFINITI reserves theright to change specifications or design atany time without notice.

IMPORTANT INFORMATION ABOUTTHIS MANUALYou will see various symbols in thismanual. They are used in the followingways:

WARNING

This is used to indicate the presence of ahazard that could cause death or seriouspersonal injury. To avoid or reduce the risk,the procedures must be followed precisely.

CAUTION

This is used to indicate the presence of ahazard that could cause minor or moderatepersonal injury or damage to your vehicle.To avoid or reduce the risk, the proceduresmust be followed carefully.

SIC0697

If you see the symbol above, it means “Donot do this” or “Do not let this happen”.

If you see a symbol similar to those abovein an illustration, it means the arrow pointsto the front of the vehicle.

Arrows in an illustration that are similar tothose above indicate movement or action.

Arrows in an illustration that are similar to

Page 4: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

those above call attention to an item in theillustration.

CALIFORNIA PROPOSITION 65WARNING

WARNING

Engine Exhaust, some of its constituents,and certain vehicle components contain oremit chemicals known to the State ofCalifornia to cause cancer and birth defectsor other reproductive harm. In addition,certain fluids contained in vehicles andcertain products of component wear containor emit chemicals known to the State ofCalifornia to cause cancer and birth defectsor other reproductive harm.

CALIFORNIA PERCHLORATE ADVI-SORYSome vehicle parts, such as lithiumbatteries, may contain perchlorate materi-al. The following advisory is provided:“Perchlorate Material - special handlingmay apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

© 2013 NISSAN MOTOR CO., LTD.

All rights reserved. No part of this Owner’sManual may be reproduced or stored in aretrieval system, or transmitted in anyform, or by any means, electronic, mechan-ical, photocopying, recording or otherwise,without the prior written permission ofNissan Motor Co., Ltd.

Page 5: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

INFINITI CUSTOMER CARE PROGRAMINFINITI CARES ...

Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and yourINFINITI retailer are our primary concerns. Your INFINITI retailer is always available to assist you with all your automobile sales and serviceneeds.

However, if there is something that yourINFINITI retailer cannot assist you with oryou would like to provide INFINITI directlywith comments or questions, please con-tact our (INFINITI’s) Consumer Affairs De-partment using our toll-free number:

For U.S. customers1-800-662-6200

For Canadian customers1-800-361-4792

The Consumer Affairs Department will askfor the following information:

. Your name, address, and telephonenumber

. Vehicle identification number (on dashpanel)

. Date of purchase

. Current odometer reading

. Your INFINITI retailer’s name

. Your comments or questionsOR

You can write to INFINITI with the informa-tion on the left at:

For U.S. customersINFINITI DivisionNissan North America, Inc.Consumer Affairs DepartmentP.O. Box 685003Franklin, TN 37068-5003or via e-mail at:[email protected]

For Canadian customersINFINITI DivisionNissan Canada Inc.5290 Orbitor DriveMississauga, Ontario L4W 4Z5or via e-mail at:[email protected]

If you prefer, visit us at:

www.infinitiUSA.com (for U.S. customer) or

www.infiniti.ca (for Canadian customers)

We appreciate your interest in INFINITI andthank you for buying a quality INFINITIvehicle.

Page 6: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System Overview HybridSystem

Illustrated table of contents 0

Safety — Seats, seat belts and supplemental restraint system

Instruments and controls

Pre-driving checks and adjustments

Monitor, climate, audio, phone and voice recognition systems

Starting and driving

In case of emergency

Appearance and care

Maintenance and do-it-yourself

Technical and consumer information

1

2

3

4

5

6

7

8

9

Table ofContents

10Index

Page 7: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,
Page 8: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System Overview

Infiniti Direct ResponseHybrid® System............................... Hybrid System-2Lithium-ion (Li-ion) battery............... Hybrid System-2High voltage cautions ...................... Hybrid System-2Road accident cautions.................... Hybrid System-3Emergency shut-off system.............. Hybrid System-4Operation of the INFINITI DirectResponse Hybrid® System............... Hybrid System-4

Starting and slow speed driving ... Hybrid System-4Medium or high speed driving..... Hybrid System-4Rapid acceleration....................... Hybrid System-5Deceleration and braking............. Hybrid System-5Stopping ..................................... Hybrid System-5

Energy monitors.............................. Hybrid System-5Assist charge gauge................... Hybrid System-5Energy Flow ............................... Hybrid System-5Fuel economy history................. Hybrid System-6

Regenerative brake ......................... Hybrid System-8Efficient use of your vehicle ............ Hybrid System-8Approaching Vehicle Sound forPedestrians (VSP) system................ Hybrid System-8Hybrid vehicle precautions .............. Hybrid System-9

High voltage components .......... Hybrid System-9Hybridvehicle characteristics.............. Hybrid System-10

Page 9: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-2 Hybrid System Overview

The INFINITI Direct Response Hybrid®

System combines the power of a gasolineengine and an electric motor to helpminimize fuel consumption and emissions.

Depending on driving conditions, thevehicle runs on a combination of thegasoline engine and the electric motor,whichever is best for those conditions.

Because the gasoline engine charges theLithium-ion (Li-ion) battery as needed, thebattery does not have to be charged froman outside source like an all-electricvehicle.

WARNING

Your vehicle contains a sealed Lithium ion(Li-ion) high voltage battery. If the Li-ionbattery is disposed of improperly, there is arisk of severe burns and electrical shockthat may result in serious injury or deathand there is also a risk of environmentaldamage.

CAUTION

. Do not misuse the Li-ion battery.

. Do not use the Li-ion battery for anyother purpose.

The Li-ion battery is used to drive theelectric motors in the INFINITI DirectResponse Hybrid® System.

The Li-ion battery has a limited service life.Contact your INFINITI retailer for informa-tion about recycling or disposal of thebattery.

WARNING

. The INFINITI Direct Response Hybrid®

System uses high voltage up to approxi-mately 408 volts. The system can be hotduring and after starting. Be careful ofboth the high voltage and the hightemperature. Obey the warning labelsattached to the vehicle.

. Never disassemble, remove or replacehigh-voltage parts and harnesses aswell as their connectors. Doing so cancause severe burns or electric shock thatmay result in serious injury or death.High-voltage harnesses are colored or-ange. The vehicle high voltage systemhas no user serviceable parts. Take yourvehicle to an INFINITI retailer for anynecessary maintenance.

. Never try to remove the service pluglocated in the trunk. The service plug isused only when the vehicle is servicedby trained technicians wearing personalprotection equipment and is part of thehigh voltage system. Touching the ser-vice plug can cause severe burns orelectric shock that may result in seriousinjury or death.

INFINITI DIRECT RESPONSE HYBRID®

SYSTEM LITHIUM-ION (Li-ion) BATTERY HIGH VOLTAGE CAUTIONS

Page 10: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

In case of a collision:

. If your vehicle is drivable, pull yourvehicle off the road, put the transmis-sion in the P (Park) position, apply theparking brake and turn the INFINITIDirect Response Hybrid® System off.

. Check to see if there are exposed highvoltage parts and cables. Never touchthe parts and cables. For their locations,see “High voltage components” (P.Hy-brid System-9). To avoid personal injury,never touch high-voltage wiring, con-nectors, and other high-voltage parts,such as electric motor inverter andLithium ion (Li-ion) battery. An electricshock may occur if exposed electricwires are visible when viewed frominside or outside of your vehicle. There-fore, never touch exposed electric wires.

. If the vehicle receives a strong impact tothe floor while driving, stop the vehiclein a safe location and check the floor.

. Inspect the ground under the vehicle. Ifliquid has leaked onto the ground, thefuel system may have been damaged.

Leave the vehicle as soon as possible.

. Leaks or damage to the Li-ion batterymay result in a fire. If you discover them,contact emergency services immedi-ately. Since the fluid leak may be lithiumorganic electrolyte from the Li-ion bat-tery, never touch the fluid leak inside oroutside the vehicle. If the fluid contactsyour skin or eyes, wash it off immedi-ately with a large amount of water andreceive immediate medical attention tohelp avoid serious injury.

. If a fire occurs in the hybrid vehicle,leave the vehicle as soon as possible.Only use a type ABC, BC or C fireextinguisher that is meant for use onelectrical fires. Using water or theincorrect fire extinguisher can result inserious injury or death from electricalshock.

. If you are not able to safely assess thevehicle due to vehicle damage, do nottouch the vehicle. Leave the vehicle andcontact emergency services. Advise 1stresponders that this is a hybrid vehicle.

. In the event of an accident that requiresbody repair and painting, the vehicleshould be delivered to an INFINITI

retailer to have the Li-ion battery packand high voltage parts such as theinverter, including the wiring harness,removed prior to painting. Li-ion batterypacks exposed to heat in the paint boothwill experience capacity loss. DamagedLi-ion battery packs may also posesafety risks to untrained mechanicsand repair personnel.

Hybrid System Overview Hybrid System-3

ROAD ACCIDENT CAUTIONS

Page 11: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-4 Hybrid System Overview

The emergency shut-off system is activatedand the high-voltage system automaticallyturns off in the following conditions:

. Front and side collisions in which theair bags are deployed.

. Certain rear collisions.

. Certain INFINITI Direct Response Hy-brid® System malfunctions

For the above collisions and the certainhybrid system malfunctions, the READY todrive indicator light will turn off. See“Warning/indicator lights and audible re-minders” (P.2-12).

The emergency shut-off activates for theabove collisions to minimize risk of anevent that could cause injury or anaccident. If the emergency shut-off systemactivates, the hybrid system may notswitch to READY to drive position, contactan INFINITI retailer. Even if the ignitionswitch is switched to READY to driveposition, the system may shut-off sud-denly. Therefore, drive cautiously to thenearest INFINITI retailer or contact anINFINITI retailer as soon as possible.

To start the INFINITI Direct ResponseHybrid® System:

1. Depress the brake pedal and place theignition switch in the ON position whenthe transmission is in the P (Park) or N(Neutral) position (P is recommended).(For more details, see “Push-buttonignition switch” (P.5-10).)

2. The READY to drive indicator lightflashes, then turns illuminated. (Thehybrid system switched to the READY todrive mode when the indicator lightilluminates.)

When the READY to drive indicator lightilluminates, the vehicle can be

driven, even if the gasoline engine is notrunning.

NOTE:

The gasoline engine starts and stopsautomatically. It may stop during lowspeed driving, deceleration or when thevehicle is stopped.

The gasoline engine may automaticallyrun in the following conditions:. The level of remaining charge in the

Lithium ion (Li-ion) battery is low. Theengine runs to charge the Li-ionbattery and to provide power to the

drive the vehicle.. The temperature of the engine coolant

is low.. Based on driving conditions.. The shift lever is shifted to the P (Park)

position, the driver’s seat belt isreleased and the driver’s side door isthen opened.

The hybrid system operates as followsbased on driving conditions and the Li-ionbattery charge.

STARTING AND SLOW SPEED DRIV-INGThe vehicle is driven by the electric motordepending on the available Li-ion batterycharge.

MEDIUM OR HIGH SPEED DRIVINGThe system automatically controls thegasoline engine and electric motor in orderto obtain the optimum fuel mileage andperformance, depending on the drivingsituation and available Li-ion batterycharge.

When the remaining battery level is low,the Li-ion battery is charged by the electricmotor that is driven to generate electricpower while the vehicle is driving.

EMERGENCY SHUT-OFF SYSTEM OPERATION OF THE INFINITI DIRECTRESPONSE HYBRID® SYSTEM

Page 12: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

RAPID ACCELERATIONThe vehicle is accelerated using both thegasoline engine and the electric motordepending on the available Li-ion batterycharge.

DECELERATION AND BRAKINGThe Li-ion battery is charged by the electricmotor that changes the energy of therotating wheels into electric power. See“Regenerative brake” (P.Hybrid System-8).

STOPPINGThe gasoline engine may stop running tosave fuel depending on the available Li-ionbattery charge.

The INFINITI Direct Response Hybrid®

System monitors the status of power beingsent to the electric motor and the Lithiumion (Li-ion) battery state of charge. Thestatus is shown on the assist charge gaugein the meter and the energy flow/remain-ing Li-ion battery charge in the vehicleinformation display. System status canalso be shown when the screen is in theenergy flow mode or energy/fuel historymode.

JVO0109X

ASSIST CHARGE GAUGEThis gauge indicates the actual electricmotor power consumption and the char-ging power to the Li-ion battery.

For additional information, see “Assistcharge gauge” (P.2-8).

ENERGY FLOWWhen you use this system, make sure thehybrid system is in the READY to drivemode. See “Operation of the INFINITI DirectResponse Hybrid® System” (P.Hybrid Sys-tem-4).

Hybrid System Overview Hybrid System-5

ENERGY MONITORS

Page 13: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-6 Hybrid System Overview

JVO0111X

All-Wheel Drive (AWD) modelsIf you use the system with the hybridsystem off (ignition switch placed in theACC position) for a long time, it willdischarge the 12-volt battery power, andthe hybrid system will not start.

Energy monitor for various operatingmodes can be displayed on the vehicleinformation display. (See “1. Energy moni-tor” (P.2-31).)

This is an example of the Energy Flowdisplay. The Energy Flow display changes,depending on the following operatingconditions. The graphic indicates theamount of power in the Li-ion battery.

The following are displayed on the EnergyFlow screen.

. When the vehicle is powered only bythe electric motor.

. When the vehicle is powered only bythe gasoline engine.

. When the vehicle is powered by boththe electric motor and the gasolineengine.

. When the vehicle is charging the Li-ionbattery with the regenerative brake andgasoline engine.

. When the vehicle is charging the Li-ionbattery with the regenerative brake.

. When the vehicle is charging the Li-ionbattery with the gasoline engine.

. When the vehicle is powered by thegasoline engine and is charging the Li-ion battery.

. When there is no Energy Flow in thevehicle

. When the vehicle is driving by the All-Wheel Drive (AWD) (AWD models).

FUEL ECONOMY HISTORYThe Fuel Economy History screen appearsin the lower display when the screen is inthe Fuel Economy History mode.

Page 14: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0246X

1. Push the MENU *1 button and touch[Information].

2. Touch [Fuel Economy History].

JVO0112X

The Fuel Economy History displays thevehicle’s average fuel consumption andregenerative electric power at 2 minuteintervals.

The displayed values on the screen in-dicate general driving conditions. Accuracyvaries with driving habits and road condi-tions.

1. Regenerated energy in the past 12minutes: The regenerated energy inthe past 12 minutes is indicated withsymbols . One symbol indicates 30watt-hour. The energy of 30 watt-hourilluminates a 30 watt bulb for an hour.

2. Fuel consumption (without latest col-umn) in the past 12 minutes: Fuelconsumption in the past 12 minutes isdisplayed.

3. Current fuel consumption (Latest col-umn): The current fuel consumption iscalculated and displayed based ondistance and fuel consumption.

NOTE:

The fuel consumption displays on theupper side of the fuel economy historydisplay, and the regenerated energy dis-plays on the lower side of the economyhistory.

Hybrid System Overview Hybrid System-7

Page 15: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-8 Hybrid System Overview

When the vehicle decelerates while thevehicle is driven with the shift lever in theD (Drive) position or in the manual shiftmode, the Lithium ion (Li-ion) battery canbe charged by the electric motor. Theelectric motor converts the energy of therotating wheels into electric power underthe following circumstances:

. When the accelerator pedal is released.

. When the brake pedal is depressed.

. When there is no malfunction in thebrake system or the INFINITI DirectResponse Hybrid® System.

The regenerative brake may not workproperly if the vehicle has tires and roadwheels other than the ones specified inthis manual.

Drive your vehicle with smooth accelera-tion and deceleration.

. While driving, energy is recoveredthrough the regenerative brake as thevehicle decelerates. However, for mostefficient use, do not accelerate ordecelerate your vehicle more thannecessary.

. Avoid abrupt acceleration and decelera-tion.

. The power of the Lithium ion (Li-ion)battery can be checked on the EnergyFlow or Energy monitor. See “EnergyFlow” (P.Hybrid System-5) or “Tripcomputer” (P.2-31). Gradual or non-abrupt acceleration and decelerationwill make more effective use of theelectric using gasoline engine power.

. When parking, be sure to place the shiftlever in the P (Park) position. Whiledriving, place the shift lever in the D(Drive) position.

The Approaching Vehicle Sound for Pedes-trians (VSP) system is a function that usessound to help alert pedestrians of thepresence of the vehicle when it is beingdriven at a low speed in the electric drivemode under the following conditions:

. The sound starts when the vehiclestarts accelerating.

. The sound stops when the vehiclespeed is more than 19 MPH (30 km/h)while accelerating.

. The sound starts when the vehiclespeed is less than 16 MPH (25 km/h)while decelerating.

. The sound stops when the vehiclestops.

. The sound does not stop with thevehicle in the R (Reverse) position evenif the vehicle stops.

The VSP system is automatically turned onwhen the vehicle is in the READY to drivemode.

If there is a malfunction in the VSP system,the VSP OFF indicator light in the meterilluminates. See “Approaching VehicleSound for Pedestrians (VSP) OFF indicatorlight” (P.2-18).

REGENERATIVE BRAKE EFFICIENT USE OF YOUR VEHICLE APPROACHING VEHICLE SOUND FORPEDESTRIANS (VSP) SYSTEM

Page 16: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

. If the sound from the VSP system is notheard while driving, stop the vehicle in asafe and quiet location. Open a window,and then place the vehicle in the R(Reverse) position with the brake pedalfirmly depressed. Check that the operat-ing sound can be heard from the frontside of the vehicle.

. If the sound cannot be heard, immedi-ately contact an INFINITI retailer forinspection.

HIGH VOLTAGE COMPONENTS

WARNING

. The INFINITI Direct Response Hybrid®

System uses high voltage up to approxi-mately 408 volts. The system can be hotwhile and after starting. Be careful ofboth the high voltage and the hightemperature. Obey the warning labelsattached to the vehicle.

. Never touch, disassemble, remove orreplace the high voltage parts, har-nesses and their connectors. High vol-tage harnesses are orange. Touching,disassembling, removing or replacingthose parts and harnesses can causesevere burns or electric shock that mayresult in serious injury or death.

Hybrid System Overview Hybrid System-9

HYBRID VEHICLE PRECAUTIONS

Page 17: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-10 Hybrid System Overview

JVO0096X

1. Electric motor inverter

2. High voltage harnesses (orange)

3. Lithium ion (Li-ion) battery

4. Electric compressor

5. Electric motor

6. 12-volt battery

The hybrid system uses high voltage up toapproximately 408 volts. High voltagecomponents are indicated in the illustra-tion. High voltage harnesses are orange.The system can be hot while and afterstarting. Be careful of both the high voltage

and the high temperature.

HYBRID VEHICLE CHARACTERISTICS

WARNING

. When you leave your vehicle, be sure toplace the ignition switch in the OFFposition.

. Be sure to put the transmission in the P(Park) position because the vehicle canmove when the READY to drive indicatorlight is on even if the gasoline engine isnot running. When the READY to driveindicator light is on, do not leave yourvehicle in a shift position other than theP (Park) position. The vehicle will creepand start abruptly if the acceleratorpedal is depressed by mistake. Thismay cause serious injury or death.

CAUTION

If the vehicle is parked for a long period oftime, the battery discharges gradually. Toavoid this occurrence, drive the vehicle forapproximately 30 minutes at least onceevery two to three months. Otherwise, the

Page 18: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Lithium ion (Li-ion) battery may be da-maged. If the Li-ion battery is completelydischarged and the hybrid system cannot beactivated, contact an INFINITI retailer.

High voltage parts and harnesses on thehybrid vehicles emit approximately thesame amount of electromagnetic wavesas the conventional gasoline-powered ve-hicles or home electronic appliances de-spite of their electromagnetic shieldings.Unwanted noise may occur in the receptionof a mobile two-way radio.

Charging the Li-ion battery while driving isimportant. The vehicle cannot run if the Li-ion battery is discharged. In the N (Neutral)position, the Li-ion battery does notrecharge. Leaving the transmission in theN (Neutral) position for an extended periodof time may discharge the Li-ion battery.The Li-ion battery recharges when the shiftlever is in any position other than N(Neutral).

JVO0100X

Left sideAn air vent *A is located on the right andleft sides between the rear seat and reardoor to cool the Li-ion battery and DC/DCconverter. If the vent is covered, the Li-ionbattery or DC/DC converter will overheatresulting in reduced output performance ofthe hybrid system. See “Lithium-ion (Li-ion) battery and DC/DC converter air vent”(P.7-6).

JVO0101X

CAUTION

. Do not allow any liquid to get on or inthe air vent. It may cause a short circuitand damage the Li-ion battery or DC/DCconverter.

. Do not place objects over or into the airvent. The Li-ion battery or DC/DC con-verter may overheat and be damaged.

Hybrid System Overview Hybrid System-11

Page 19: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Hybrid System-12 Hybrid System Overview

JVO0006X

CAUTION

Do not load large amounts of water in opencontainers (aquariums or buckets) into thevehicle. If the water spills onto the Li-ionbattery, it may cause a short circuit anddamage the battery.

Noise and vibrationAfter the hybrid system is activated, thefollowing noises and vibrations that areunique to the hybrid system may occur.This does not indicate a malfunction.

. Electric motor noise from the enginecompartment

. Noise from the rear of the vehicle whenthe hybrid system activates or deacti-vates

. Noise and vibration when the gasolineengine starts running or stops

. Operating noise or electric motor noisewhen releasing the accelerator pedal ordepressing the brake pedal

. Engine noise due to rapid acceleration

. Fan noise from the air inlet locatedbetween the rear seat and rear door

. Noise from the climate control system

. Noise from the vehicle in order to alertpedestrians to the presence of anapproaching vehicle. See “ApproachingVehicle Sound for Pedestrians (VSP)system” (P.Hybrid System-8).

Page 20: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0 Illustrated table of contents

Seats, seat belts and Supplemental RestraintSystem (SRS)....................................................... 0-2Exterior front ....................................................... 0-3Exterior rear......................................................... 0-4Passenger compartment ...................................... 0-5Cockpit ................................................................ 0-6

Instrument panel................................................. 0-8Meters and gauges ............................................. 0-9Engine compartment ......................................... 0-10

VQ35HR engine ........................................... 0-10Warning and indicator lights ............................. 0-11

Page 21: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-2 Illustrated table of contents

SSI0715

1. Supplemental front-impact air bags(P.1-37)

2. Front seat-mounted side-impact sup-plemental air bags (P.1-37)

3. Seat belts (P.1-10)4. Head restraints (P.1-5)

5. Roof-mounted curtain side-impactsupplemental air bags (P.1-37)

6. Child restraint anchor points (for toptether strap child restraint) (P.1-33)

7. Occupant classification sensors(weight sensors) (P.1-42)

8. Front seats (P.1-3)9. Seat belts with pretensioners (P.1-49)10. Rear seats

— Child restraints (P.1-19)11. LATCH (Lower Anchors and Tethers for

CHildren) system (P.1-21)

SEATS, SEAT BELTS AND SUPPLEMENTALRESTRAINT SYSTEM (SRS)

Page 22: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVC0438X

1. Hood (P.3-18)2. Windshield wiper and washer

— Operation (P.2-38)— Maintenance (P.8-21)

3. Headlight— Operation (P.2-41)

— Maintenance (P.8-28)— Adaptive Front lighting System(AFS) (if so equipped) (P.2-45)

4. Moonroof (P.2-56)5. Power windows (P.2-54)6. Outside mirrors (P.3-26)

— Side turn signal light (P.2-47)— Side view camera (if so equipped)*

7. Recovery hook (P.6-11)8. Sonar system (if so equipped)*9. Front camera (if so equipped)*10. Turn signal (P.2-47, P.8-28)11. Fog light (P.2-47, P.8-28)12. Tires

— Wheels and tires (P.8-30, P.9-9)— Flat tire (P.6-3)— Tire Pressure Monitoring System(TPMS) (P.2-15, P.5-4)

13. Doors— Keys (P.3-2)— Door locks (P.3-4)— Intelligent Key system (P.3-6)— Remote keyless entry system(P.3-14)— Courtesy light (P.2-61)

*: Refer to the Infiniti InTouch Owner’sManual.

Illustrated table of contents 0-3

EXTERIOR FRONT

Page 23: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-4 Illustrated table of contents

JVC0439X

1. Trunk— Intelligent Key system (P.3-6)— Remote keyless entry system(P.3-14)— Trunk lid (P.3-19)

2. High-mounted stop light (P.8-27)

3. Satellite antenna (P.4-3)4. Rear window defroster (P.2-41)/Anten-

na (P.4-3)5. Sonar system (if so equipped)*

— Back-up Collision Intervention (BCI)system (if so equipped) (P.5-48)

6. Rear view camera*7. Recovery hook (P.6-11)8. Rear combination light (P.8-27)9. Fuel-filler door

— Operation (P.3-21)— Fuel information (P.9-4)

10. Child safety rear door locks (P.3-6)*: Refer to the Infiniti InTouch Owner’s

Manual.

EXTERIOR REAR

Page 24: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVC0425X

1. Coat hooks (P.2-53)2. Rear personal light (P.2-59)3. Sun visors (P.3-25)4. Map light (P.2-58)

— SOS call switch (if so equipped)*5. Moonroof switch (P.2-56)

6. Sunglasses holder (P.2-51)7. Power window switch (P.2-54)/Out-

side mirror remote control switch(P.3-26)

8. Automatic drive positioner switch (ifso equipped) (P.3-28)

9. Inside mirror— Operation (P.3-25)— HomeLink® universal transceiver(P.2-61)— Compass (if so equipped) (P.2-9)

10. Rear armrest (P.1-5)11. Rear cup holders (P.2-49)12. Rear ashtray (if so equipped) (P.2-49)13. Console box (P.2-52)

— Power outlet (P.2-48)— Media hub*

14. Front cup holders (P.2-49)15. Front passenger air bag status light

(P.1-44)*: Refer to the Infiniti InTouch Owner’s

Manual.

Illustrated table of contents 0-5

PASSENGER COMPARTMENT

Page 25: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-6 Illustrated table of contents

JVC0472X

1. Side ventilator (P.4-2)2. Headlight, fog light and turn signal

switch (P.2-41)3. Steering wheel

— Horn (P.2-47)

— Driver supplemental air bag(P.1-37)— Heated steering wheel (if soequipped)*— Steering system (P.5-104)

4. Windshield wiper and washer switch(P.2-38)

5. Hazard warning flasher switch (P.6-2)6. Shift lever (P.5-14)7. INFINITI controller*8. Vehicle Dynamic Control (VDC) OFF

switch (P.2-48, P.5-108)9. Trunk lid release switch (P.3-19)10. Instrument brightness control switch

(P.2-46)11. TRIP/RESET switch for twin trip od-

ometer (P.2-7)12. Electric tilting/telescopic steering

wheel switch (P.3-24)13. Steering-wheel-mounted controls (left

side)— Audio control steering switch*— Hands-Free Phone System switch*— Voice recognition system switch*

14. Steering-wheel-mounted controls(right side)— Trip computer switches (P.2-31)— Cruise control switches (if soequipped) (P.5-56)— Intelligent Cruise Control (ICC)switches (if so equipped) (P.5-58)— Dynamic driver assistance switch(if so equipped) (P.5-30, P.5-37,

COCKPIT

Page 26: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

P.5-79)15. INFINITI Drive Mode Selector (P.5-21)*: Refer to the Infiniti InTouch Owner’s

Manual.

Illustrated table of contents 0-7

Page 27: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-8 Illustrated table of contents

JVC0427X

1. Paddle shifter (if so equipped) (P.5-16)2. Meters and gauges (P.2-6)

— Clock (P.2-34)3. Push-button ignition switch (P.5-10)4. Center ventilator (P.4-2)5. Automatic climate control system*

6. Upper touch screen display (upperdisplay)* and Navigation system (if soequipped)*

7. Lower touch screen display (lowerdisplay)*

8. Rear window and outside mirror

defroster switch (P.2-41)9. Front passenger supplemental air bag

(P.1-37)10. Hood release handle (P.3-18)11. Fuse box cover (P.8-24)12. Parking brake (P.5-20)13. Seat heater switch*14. Audio system*15. Trunk release power cancel switch

(P.3-20)16. Glove box (P.2-51)*: Refer to the Infiniti InTouch Owner’s

Manual.

INSTRUMENT PANEL

Page 28: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVC0473X

1. Tachometer (P.2-8)2. Warning/Indicator lights (P.2-12)3. Speedometer (P.2-7)4. Assist charge gauge

(P.Hybrid System-5, P.2-8)5. Vehicle information display (P.2-21)/

Odometer/twin trip odometer (P.2-7)6. Fuel gauge (P.2-8)

Illustrated table of contents 0-9

METERS AND GAUGES

Page 29: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-10 Illustrated table of contents

JVM0294X

1. Engine oil filler cap (P.8-12)2. Brake fluid reservoir (P.8-15)3. Fuse/fusible link holder (P.8-23)4. Air cleaner (P.8-20)5. Inverter coolant reservoir (P.8-11)6. Radiator filler cap (P.8-9)7. Engine coolant reservoir (P.8-9)8. Engine oil dipstick (P.8-12)9. Window washer fluid reservoir

(P.8-16)

VQ35HR ENGINEThe 12-volt battery is located inside thetrunk.

ENGINE COMPARTMENT

Page 30: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Warninglight Name Page

12-volt battery charge warninglight 2-12

Anti-lock Braking System (ABS)warning light 2-13

Brake system warning light(yellow) 2-13

Brake warning light (red) 2-13

Direct Response Hybrid® Sys-tem warning light 2-14

Forward emergency brakingsystem warning light (if soequipped)

2-15

Low fuel warning light 2-15

Low tire pressure warning light 2-15

Master warning light 2-17

Power steering warning light 2-17

Seat belt warning light 2-17

Supplemental air bag warninglight 2-17

Vehicle Dynamic Control (VDC)warning light

2-18

Indicatorlight Name Page

Approaching Vehicle Sound forPedestrians (VSP) OFF indicatorlight

2-18

ECO drive indicator light 2-18

EV indicator light 2-18

Exterior light indicator 2-19

Front fog light indicator light 2-19

Front passenger air bag statuslight 2-19

High beam assist indicator light(if so equipped) 2-19

High beam indicator light 2-19

Malfunction Indicator Light(MIL) 2-19

READY to drive indicator light 2-20

Security indicator light 2-20

Turn signal/hazard indicatorlights 2-20

Vehicle Dynamic Control (VDC)off indicator light

2-20

Illustrated table of contents 0-11

WARNING AND INDICATOR LIGHTS

Page 31: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

0-12 Illustrated table of contents

MEMO

Page 32: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1 Safety — Seats, seat belts and supplementalrestraint system

Seats................................................................... 1-2Front seats ...................................................... 1-3Armrest ........................................................... 1-5

Head restraints/headrests ................................... 1-5Adjustable headrestraint/headrest components........................ 1-6Non-adjustable headrestraint/headrest components........................ 1-7Remove ........................................................... 1-7Install.............................................................. 1-8Adjust ............................................................. 1-8

Seat belts.......................................................... 1-10Precautions on seat belt usage ..................... 1-10Pregnant women ........................................... 1-12Injured persons ............................................. 1-12Pre-crash seat belts with comfort function(front seats) (if so equipped) ......................... 1-12Three-point type seat belt ............................. 1-13Seat belt extenders ....................................... 1-16Seat belt maintenance................................... 1-16

Child safety ....................................................... 1-17Infants........................................................... 1-18Small children ............................................... 1-18Larger children .............................................. 1-18

Child restraints ................................................. 1-19Precautions on child restraints..................... 1-19Lower Anchors and Tethers for CHildrenSystem (LATCH)............................................ 1-21Rear-facing child restraint installationusing LATCH................................................. 1-23Rear-facing child restraint installation usingthe seat belts .............................................. 1-25Forward-facing child restraint installationusing LATCH................................................. 1-27Forward-facing child restraint installationusing the seat belts..................................... 1-29Installing top tether strap ............................ 1-33Booster seats .............................................. 1-33

Supplemental restraint system.......................... 1-37Precautions on supplementalrestraint system........................................... 1-37INFINITI Advanced Air Bag System(front seats)................................................. 1-42Front seat-mounted side-impact supplementalair bag and roof-mounted curtain side-impactsupplemental air bag systems ..................... 1-47Seat belts with pretensioners (front seats).... 1-49Supplemental air bag warning labels........... 1-50Supplemental air bag warning light ............. 1-50Repair and replacement procedure............... 1-51

Page 33: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-2 Safety — Seats, seat belts and supplemental restraint system

SSS0133

WARNING

. Do not ride in a moving vehicle when theseatback is reclined. This can be danger-ous. The shoulder belt will not beagainst your body. In an accident, youcould be thrown into it and receive neckor other serious injuries. You could alsoslide under the lap belt and receiveserious internal injuries.

. For the most effective protection whenthe vehicle is in motion, the seat shouldbe upright. Always sit well back in the

seat with both feet on the floor andadjust the seat belt properly. See “Pre-cautions on seat belt usage” (P.1-10).

. Do not leave children unattended insidethe vehicle. They could unknowinglyactivate switches or controls. Unat-tended children could become involvedin serious accidents.

. The seatback should not be reclinedfurther than necessary for comfort. Seatbelts are most effective when the pas-senger sits well back and straight up inthe seat. If the seatback is reclined, therisk of sliding under the lap belt and

being injured is increased.

CAUTION

When adjusting the seat positions, be surenot to contact any moving parts to avoidpossible injuries and/or damages.

SEATS

Page 34: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

FRONT SEATS

Front power seat adjustmentOperating tips:

. The power seat motor has an auto-resetoverload protection circuit. If the motorstops during operation, wait 30 sec-onds, then reactivate the switch.

. Do not operate the power seat switchfor a long period of time when theINFINITI Direct Response Hybrid® Sys-tem is not running. This will dischargethe 12-volt battery.

See “Automatic drive positioner” (P.3-28)for the seat position memory function (if soequipped).

SSS1051

Forward and backward:

Moving the switch*1 forward or backwardwill slide the seat forward or backward tothe desired position.

Reclining:

Move the recline switch *2 backward untilthe desired angle is obtained. To bring theseatback forward again, move the switch*2 forward.

The reclining feature allows adjustment ofthe seatback for occupants of differentsizes for added comfort and to help obtainproper seat belt fit. (See “Precautions onseat belt usage” (P.1-10).) Also, the seat-

back can be reclined to allow occupants torest when the vehicle is parked.

Safety — Seats, seat belts and supplemental restraint system 1-3

Page 35: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-4 Safety — Seats, seat belts and supplemental restraint system

SSS1052

Seat lifter:

Push the front or rear end of the switch upor down to adjust the angle of the frontportion or height of the seat.

SSS1053

Lumbar support (if so equipped):

The lumbar support feature provides lowerback support to the driver.

Push the front or back end of the switch toadjust the seatback lumbar area.

JVR0186X

Side support (if so equipped):

The side support feature allows to adjustthe torso supports. Push the switch inside*1 or outside *2 to adjust the torso area.

Page 36: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS1057

Thigh extension (if so equipped):

The front portion of the front seats can beextended forward for seating comfort. Pullup and hold the lever *1 to extend thefront portion to the desired position.

Heated seatsThe front seats are warmed by built-inheaters. The switches located on theinstrument panel can be operated inde-pendently of each other.

For details, see the Infiniti InTouch Owner’sManual.

SSS1061

ARMREST

Rear armrestPull the armrest forward until it is hor-izontal.

WARNING

Head restraint/headrest supplement theother vehicle safety systems. They mayprovide additional protection against injuryin certain rear end collisions. Adjust thehead restraint/headrest properly, as speci-fied in this section. Check the adjustmentafter someone else uses the seat. Do notattach anything to the head restraint/head-rest stalks or remove the head restraint/headrest. Do not use the seat if the headrestraint/headrest has been removed. If thehead restraint/headrest was removed, re-install and properly adjust the head re-straint/headrest before an occupant usesthe seating position. Failure to follow theseinstructions can reduce the effectiveness ofthe head restraint/headrest. This may in-crease the risk of serious injury or death in acollision.

Safety — Seats, seat belts and supplemental restraint system 1-5

HEAD RESTRAINTS/HEADRESTS

Page 37: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-6 Safety — Seats, seat belts and supplemental restraint system

JVR0089X

The illustration shows the seating posi-tions equipped with head restraint/head-rest.

Indicates the seating position isequipped with a head restraint.

Indicates the seating position isequipped with a headrest.

+ indicates the seating position is notequipped with a head restraint or head-rest.

. Your vehicle is equipped with a headrestraint/headrest that may be inte-grated, adjustable or non-adjustable.

. Adjustable head restraints/headrestshave multiple notches along the stalkto lock them in a desired adjustmentposition.

. The non-adjustable head restraints/headrests have single locking notch tosecure them to the seat frame.

. Proper Adjustment:— For the adjustable type, align the

head restraint/headrest so the cen-ter of your ear is approximately levelwith the center of the head re-straint/headrest.

— If your ear position is still higherthan the recommended alignment,place the head restraint/headrest atthe highest position.

. If the head restraint/headrest has beenremoved, ensure that it is reinstalledand locked in place before riding in thatdesignated seating position.

SSS0992

ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS1. Removable head restraint/headrest

2. Multiple notches

3. Lock knob

4. Stalks

Page 38: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVR0203X

NON-ADJUSTABLE HEAD RE-STRAINT/HEADREST COMPONENTS1. Removable head restraint/headrest

2. Single notch

3. Lock knob

4. Stalks

SSS1037

REMOVEUse the following procedure to remove thehead restraint/headrest.

1. Pull the head restraint/headrest up tothe highest position.

2. Push and hold the lock knob.

3. Remove the head restraint/headrestfrom the seat.

4. Store the head restraint/headrest prop-erly in a secure place so it is not loosein the vehicle.

5. Reinstall and properly adjust the headrestraint/headrest before an occupant

uses the seating position.

Safety — Seats, seat belts and supplemental restraint system 1-7

Page 39: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-8 Safety — Seats, seat belts and supplemental restraint system

SSS1038

INSTALL1. Align the head restraint/headrest

stalks with the holes in the seat. Makesure that the head restraint/headrest isfacing the correct direction. The stalkwith the adjustment notch *1 must beinstalled in the hole with the lock knob*2 .

2. Push and hold the lock knob and pushthe head restraint/headrest down.

3. Properly adjust the head restraint/headrest before an occupant uses theseating position.

SSS0997

ADJUSTFor adjustable head restraint/headrest

Adjust the head restraint/headrest so thecenter is level with the center of your ears.If your ear position is still higher than therecommended alignment, place the headrestraint/headrest at the highest position.

JVR0259X

For non-adjustable head restraint/head-rest

Make sure the head restraint/headrest ispositioned so the lock knob is engaged inthe notch before riding in that designatedseating position.

Page 40: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS1035

RaiseTo raise the head restraint/headrest, pull itup.

Make sure the head restraint/headrest ispositioned so the lock knob is engaged inthe notch before riding in that designatedseating position.

SSS1036

LowerTo lower, push and hold the lock knob andpush the head restraint/headrest down.

Make sure the head restraint/headrest ispositioned so the lock knob is engaged inthe notch before riding in that designatedseating position.

Safety — Seats, seat belts and supplemental restraint system 1-9

Page 41: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-10 Safety — Seats, seat belts and supplemental restraint system

PRECAUTIONS ON SEAT BELT USAGEIf you are wearing your seat belt properlyadjusted, and you are sitting upright andwell back in your seat with both feet on thefloor, your chances of being injured orkilled in an accident and/or the severity ofinjury may be greatly reduced. INFINITIstrongly encourages you and all of yourpassengers to buckle up every time youdrive, even if your seating position in-cludes a supplemental air bag.

Most U.S. states and Canadian provincesor territories specify that seat belts beworn at all times when a vehicle is beingdriven.

SSS0136A

SSS0134A

SEAT BELTS

Page 42: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0016

SSS0014

WARNING

. Every person who drives or rides in thisvehicle should use a seat belt at alltimes. Children should be properly re-strained in the rear seat and, if appro-priate, in a child restraint.

. The seat belt should be properly ad-justed to a snug fit. Failure to do so mayreduce the effectiveness of the entirerestraint system and increase the chanceor severity of injury in an accident.Serious injury or death can occur if theseat belt is not worn properly.

. Always route the shoulder belt over yourshoulder and across your chest. Neverrun the belt behind your back, underyour arm or across your neck. The beltshould be away from your face and neck,but not falling off your shoulder.

. Position the lap belt as low and snug aspossible AROUND THE HIPS, NOT THEWAIST. A lap belt worn too high couldincrease the risk of internal injuries in anaccident.

. Be sure the seat belt tongue is securelyfastened to the proper buckle.

. Do not wear the seat belt inside out ortwisted. Doing so may reduce its effec-tiveness.

. Do not allow more than one person touse the same seat belt.

. Never carry more people in the vehiclethan there are seat belts.

. If the seat belt warning light glowscontinuously while the ignition is turnedON with all doors closed and all seatbelts fastened, it may indicate a mal-function in the system. Have the systemchecked by an INFINITI retailer.

. No changes should be made to the seatbelt system. For example, do not modifythe seat belt, add material or installdevices that may change the seat beltrouting or tension. Doing so may affectthe operation of the seat belt system.Modifying or tampering with the seatbelt system may result in serious perso-nal injury.

. Once a seat belt pretensioner hasactivated, it cannot be reused and mustbe replaced together with the retractor.See an INFINITI retailer.

. Removal and installation of the preten-sioner seat belt system components

Safety — Seats, seat belts and supplemental restraint system 1-11

Page 43: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-12 Safety — Seats, seat belts and supplemental restraint system

should be done by an INFINITI retailer.

. All seat belt assemblies, including re-tractors and attaching hardware, shouldbe inspected after any collision by anINFINITI retailer. INFINITI recommendsthat all seat belt assemblies in useduring a collision be replaced unlessthe collision was minor and the beltsshow no damage and continue to oper-ate properly. Seat belt assemblies not inuse during a collision should also beinspected and replaced if either damageor improper operation is noted.

. All child restraints and attaching hard-ware should be inspected after anycollision. Always follow the restraintmanufacturer’s inspection instructionsand replacement recommendations. Thechild restraints should be replaced ifthey are damaged.

PREGNANT WOMENINFINITI recommends that pregnant womenuse seat belts. The seat belt should beworn snug, and always position the lapbelt as low as possible around the hips,not the waist, and place the shoulder beltover your shoulder and across your chest.

Never run the lap/shoulder belt over yourabdominal area. Contact your doctor forspecific recommendations.

INJURED PERSONSINFINITI recommends that injured personsuse seat belts, depending on the injury.Check with your doctor for specific recom-mendations.

PRE-CRASH SEAT BELTS WITH COM-FORT FUNCTION (front seats) (if soequipped)The pre-crash seat belt tightens the seatbelt with a motor to help restrain front seatoccupants. This helps reduce the risk ofinjury in a collision.

The motor retracts the seat belt under thefollowing emergency conditions:

. During emergency braking

. During sudden steering maneuvers

. Activation of the forward emergencybraking system. (See “Forward emer-gency braking system” (P.5-89).)

The pre-crash seat belt will not be activewhen:

. the seat belt is not fastened

. the vehicle speed is under 10 MPH (15km/h) during emergency braking

. the vehicle speed is under 19 MPH (30km/h) during sudden steering maneu-vers.

The pre-crash seat belt will not be activewhen the brake pedal is not depressedexcept when sudden steering maneuversoccur and the forward emergency brakingsystem activates.

The motor also retracts the seat belt whenthe seat belt is fastened or unfastened.When the seat belt is fastened, the motortightens the seat belt for a snug fit. Whenthe seat belt is unfastened, the motorretracts the seat belt. If the seat belt is notfully retracted, the motor retracts the seatbelt when the door is opened.

Always wear your seat belt correctly and situpright and well back.

If the motor cannot retract the seat beltwhen the seat belt is fastened or unfas-tened, it may indicate the pre-crash seatbelt system has a malfunction. Have yourINFINITI retailer check and repair thesystem.

When the seat belt is retracted repeatedlyin a short period of time, the motor may

Page 44: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

not be able to retract the seat belt. After afew minutes, the motor reactivates andretracts the seat belt. If the seat belt stillcannot be retracted by the motor, the pre-crash seat belt system has a malfunction.Have your INFINITI retailer check and repairthe system.

THREE-POINT TYPE SEAT BELT

WARNING

. Every person who drives or rides in thisvehicle should use a seat belt at alltimes.

. Do not ride in a moving vehicle when theseatback is reclined. This can be danger-ous. The shoulder belt will not beagainst your body. In an accident, youcould be thrown into it and receive neckor other serious injuries. You could alsoslide under the lap belt and receiveserious internal injuries.

. For the most effective protection whenthe vehicle is in motion, the seat shouldbe upright. Always sit well back in theseat with both feet on the floor andadjust the seat belt properly.

. Do not allow children to play with theseat belts. Most seating positions areequipped with Automatic Locking Re-tractor (ALR) mode seat belts. If the seatbelt becomes wrapped around a child’sneck with the ALR mode activated, thechild can be seriously injured or killed ifthe seat belt retracts and becomes tight.This can occur even if the vehicle isparked. Unbuckle the seat belt to releasethe child. If the seat belt can not beunbuckled or is already unbuckled,release the child by cutting the seat beltwith a suitable tool (such as a knife orscissors) to release the seat belt.

SSS0292

Fastening the seat belts1. Adjust the seat. (See “Seats” (P.1-2).)

2. Slowly pull the seat belt out of theretractor and insert the tongue into thebuckle until you hear and feel the latchengage.. The retractor is designed to lock

during a sudden stop or on impact.A slow pulling motion permits thebelt to move, and allows you somefreedom of movement in the seat.

. If the seat belt cannot be pulledfrom its fully retracted position,firmly pull the belt and release it.

Safety — Seats, seat belts and supplemental restraint system 1-13

Page 45: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-14 Safety — Seats, seat belts and supplemental restraint system

Then smoothly pull the belt out ofthe retractor.

SSS0290

3. Position the lap belt portion low andsnug on the hips as shown.

4. Pull the shoulder belt portion towardthe retractor to take up extra slack. Besure the shoulder belt is routed overyour shoulder and across your chest.

The three-point type seat belts have twomodes of operation:

. Emergency Locking Retractor (ELR)

. Automatic Locking Retractor (ALR)The Emergency Locking Retractor (ELR)mode allows the seat belt to extend andretract to allow the driver and passengerssome freedom of movement in the seat.

The ELR locks the seat belt when thevehicle slows down rapidly or duringimpacts.

The Automatic Locking Retractor (ALR)mode (child restraint mode) locks the seatbelt for child restraint installation.

When the ALR mode is activated the seatbelt cannot be extended again until theseat belt tongue is detached from thebuckle and fully retracted. The seat beltreturns to the ELR mode after the seat beltfully retracts. For additional information,see “Child restraints” (P.1-19).

The ALR mode should be used only forchild restraint installation. During normalseat belt use by an occupant, the ALRmode should not be activated. If it isactivated, it may cause uncomfortable seatbelt tension.

WARNING

When fastening the seat belts, be certainthat seatbacks are completely secured inthe latched position. If they are not com-pletely secured, passengers may be injuredin an accident or sudden stop.

Page 46: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0326

Unfastening the seat beltsTo unfasten the seat belt, push the buttonon the buckle. The seat belt automaticallyretracts.

Checking seat belt operationSeat belt retractors are designed to lockseat belt movement by two separatemethods:

. When the belt is pulled quickly from theretractor.

. When the vehicle slows down rapidly.To increase your confidence in the seatbelts, check the operation as follows:

. Grasp the shoulder belt and pullforward quickly. The retractor shouldlock and restrict further belt movement.

If the retractor does not lock during thischeck or if you have any question aboutseat belt operation, see an INFINITI retailer.

SSS1084

Center of rear seatSelecting correct set of seat belts:

The center seat belt buckle is identified bythe CENTER mark *A . The center seat belttongue can be fastened only into the centerseat belt buckle.

Safety — Seats, seat belts and supplemental restraint system 1-15

Page 47: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-16 Safety — Seats, seat belts and supplemental restraint system

SSS0294A

Shoulder belt height adjustment(front seats)The shoulder belt anchor height should beadjusted to the position best for you. (See“Precautions on seat belt usage” (P.1-10).)

To adjust, push the button *A , and thenmove the shoulder belt anchor to thedesired position, so that the belt passesover the center of the shoulder. The beltshould be away from your face and neck,but not falling off of your shoulder. Releasethe adjustment button to lock the shoulderbelt anchor into position.

WARNING

. After adjustment, release the adjustmentbutton and try to move the shoulder beltanchor up and down to make sure it issecurely fixed in position.

. The shoulder belt anchor height shouldbe adjusted to the position best for you.Failure to do so may reduce the effec-tiveness of the entire restraint systemand increase the chance or severity ofinjury in an accident.

SEAT BELT EXTENDERSIf, because of body size or driving position,it is not possible to properly fit the lap-shoulder belt and fasten it, an extenderthat is compatible with the installed seatbelts is available that can be purchased.The extender adds approximately 8 in (200mm) of length and may be used for eitherthe driver or front passenger seatingposition. See an INFINITI retailer for assis-tance with purchasing an extender if anextender is required.

WARNING

. Only INFINITI seat belt extenders, madeby the same company which made theoriginal equipment seat belts, should beused with the INFINITI seat belts.

. Adults and children who can use thestandard seat belt should not use anextender. Such unnecessary use couldresult in serious personal injury in theevent of an accident.

. Never use seat belt extenders to installchild restraints. If the child restraint isnot secured properly, the child could beseriously injured in a collision or asudden stop.

SEAT BELT MAINTENANCE. To clean the seat belt webbing, apply a

mild soap solution or any solutionrecommended for cleaning upholsteryor carpets. Then, wipe with a cloth andallow the seat belts to dry in the shade.Do not allow the seat belts to retractuntil they are completely dry.

. If dirt builds up in the shoulder beltguide of the seat belt anchors, the seat

Page 48: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

belts may retract slowly. Wipe theshoulder belt guide with a clean, drycloth.

. Periodically check to see that the seatbelt and the metal components such asbuckles, tongues, retractors, flexiblewires and anchors work properly. Ifloose parts, deterioration, cuts or otherdamage on the webbing is found, theentire seat belt assembly should bereplaced.

WARNING

Do not allow children to play with the seatbelts. Most seating positions are equippedwith Automatic Locking Retractor (ALR)mode seat belts. If the seat belt becomeswrapped around a child’s neck with the ALRmode activated, the child can be seriouslyinjured or killed if the seat belt retracts andbecomes tight. This can occur even if thevehicle is parked. Unbuckle the seat belt torelease the child. If the seat belt can not beunbuckled or is already unbuckled, releasethe child by cutting the seat belt with asuitable tool (such as a knife or scissors) torelease the seat belt.

Children need adults to help protect them.

They need to be properly restrained.

In addition to the general information inthis manual, child safety information isavailable from many other sources, includ-ing doctors, teachers, government trafficsafety offices, and community organiza-tions. Every child is different, so be sure tolearn the best way to transport your child.

There are three basic types of childrestraint systems:

. Rear-facing child restraint

. Forward-facing child restraint

. Booster seatThe proper restraint depends on the child’ssize. Generally, infants up to about 1 yearand less than 20 lbs (9 kg) should beplaced in rear-facing child restraints. For-ward-facing child restraints are availablefor children who outgrow rear-facing childrestraints and are at least 1 year old.Booster seats are used to help position avehicle lap/shoulder belt on a child whocan no longer use a forward-facing childrestraint.

WARNING

Infants and children need special protection.The vehicle’s seat belts may not fit themproperly. The shoulder belt may come tooclose to the face or neck. The lap belt maynot fit over their small hip bones. In anaccident, an improperly fitting seat beltcould cause serious or fatal injury. Alwaysuse appropriate child restraints.

All U.S. states and Canadian provinces orterritories require the use of approvedchild restraints for infants and small

Safety — Seats, seat belts and supplemental restraint system 1-17

CHILD SAFETY

Page 49: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-18 Safety — Seats, seat belts and supplemental restraint system

children. See “Child restraints” (P.1-19).

A child restraint may be secured in thevehicle by using either the LATCH (LowerAnchor and Tethers for CHildren) system orwith the vehicle seat belt. See “Childrestraints” (P.1-19) for more information.

INFINITI recommends that all pre-teensand children be restrained in the rear seat.Studies show that children are safer whenproperly restrained in the rear seat than inthe front seat.

This is especially important because yourvehicle has a supplemental restraint sys-tem (Air bag system) for the front passen-ger. See “Supplemental restraint system”

(P.1-37).

INFANTSInfants up to at least 1 year old should beplaced in a rear-facing child restraint.INFINITI recommends that infants be placedin child restraints that comply with FederalMotor Vehicle Safety Standards or Cana-dian Motor Vehicle Safety Standards. Youshould choose a child restraint that fitsyour vehicle and always follow the manu-facturer’s instructions for installation anduse.

SMALL CHILDRENChildren that are over 1 year old and weighat least 20 lbs (9 kg) should remain in arear-facing child restraint as long aspossible up to the height or weight limitof the child restraint. Children who outgrowthe height or weight limit of the rear-facingchild restraint and are at least 1 year oldshould be secured in a forward-facing childrestraint with a harness. Refer to themanufacturer’s instructions for minimumand maximum weight and height recom-mendations. INFINITI recommends thatsmall children be placed in child restraintsthat comply with Federal Motor VehicleSafety Standards or Canadian Motor Vehi-cle Safety Standards. You should choose achild restraint that fits your vehicle andalways follow the manufacturer’s instruc-tions for installation and use.

LARGER CHILDRENChildren should remain in a forward-facingchild restraint with a harness until theyreach the maximum height or weight limitallowed by the child restraint manufac-turer.

Once a child outgrows the height or weightlimit of the harness-equipped forward-

facing child restraint, INFINITI recommendsthat the child be placed in a commerciallyavailable booster seat to obtain properseat belt fit. For a seat belt to fit properly,the booster seat should raise the child sothat the shoulder belt is properly posi-tioned across the chest and the top,middle portion of the shoulder. Theshoulder belt should not cross the neckor face and should not fall off the shoulder.The lap belt should lie snugly across thelower hips or upper thighs, not the abdo-men.

A booster seat can only be used in seatingpositions that have a three-point type seatbelt. The booster seat should fit the vehicleseat and have a label certifying that itcomplies with Federal Motor Vehicle SafetyStandards or Canadian Motor VehicleSafety Standards. Once the child hasgrown so the shoulder belt is no longeron or near the face and neck, and the lapbelt can be positioned properly across thelower hips or upper thighs, use the seatbelt without the booster seat.

Page 50: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

Never let a child stand or kneel on any seatand do not allow a child in the cargo area.The child could be seriously injured or killedin a sudden stop or collision.

SSS0099

SSS0100

PRECAUTIONS ON CHILD RE-STRAINTS

WARNING

. Failure to follow the warnings andinstructions for proper use and installa-tion of child restraints could result inserious injury or death of a child or otherpassengers in a sudden stop or collision:

— The child restraint must be used andinstalled properly. Always follow allof the child restraint manufacturer’sinstructions for installation and use.

— Infants and children should never beheld on anyone’s lap. Even thestrongest adult cannot resist theforces of a collision.

— Do not put a seat belt around both achild and another passenger.

— INFINITI recommends that all childrestraints be installed in the rearseat. Studies show that children aresafer when properly restrained in therear seat than in the front seat. If youmust install a forward-facing childrestraint in the front seat, see “For-

Safety — Seats, seat belts and supplemental restraint system 1-19

CHILD RESTRAINTS

Page 51: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-20 Safety — Seats, seat belts and supplemental restraint system

ward-facing child restraint installa-tion using the seat belts” (P.1-29).

— Even with the INFINITI Advanced AirBag System, never install a rear-facing child restraint in the frontseat. An inflating air bag couldseriously injure or kill a child. Arear-facing child restraint must onlybe used in the rear seat.

— Be sure to purchase a child restraintthat will fit the child and vehicle.Some child restraints may not fitproperly in your vehicle.

— Child restraint anchor points aredesigned to withstand loads fromchild restraints that are properlyfitted.

— Never use the anchor points foradult seat belts or harnesses.

— A child restraint with a top tetherstrap should not be used in the frontpassenger seat.

— Keep seatbacks as upright as pos-sible after fitting the child restraint.

— Infants and children should alwaysbe placed in an appropriate childrestraint while in the vehicle.

. When the child restraint is not in use,keep it secured with the LATCH systemor a seat belt. In a sudden stop orcollision, loose objects can injure occu-pants or damage the vehicle.

CAUTION

A child restraint in a closed vehicle canbecome very hot. Check the seating surfaceand buckles before placing a child in thechild restraint.

This vehicle is equipped with a universalchild restraint anchor system, referred toas the LATCH (Lower Anchors and Tethersfor CHildren) system. Some child restraintsinclude rigid or webbing-mounted attach-ments that can be connected to theseanchors.

For details, see “Lower Anchors andTethers for CHildren System (LATCH)” (P.1-21).

If you do not have a LATCH compatiblechild restraint, the vehicle seat belts canbe used.

Several manufacturers offer child restraints

for infants and small children of varioussizes. When selecting any child restraint,keep the following points in mind:

. Choose only a restraint with a labelcertifying that it complies with FederalMotor Vehicle Safety Standard 213 orCanadian Motor Vehicle Safety Stan-dard 213.

. Check the child restraint in your vehicleto be sure it is compatible with thevehicle’s seat and seat belt system.

. If the child restraint is compatible withyour vehicle, place your child in thechild restraint and check the variousadjustments to be sure the childrestraint is compatible with your child.Choose a child restraint that is de-signed for your child’s height andweight. Always follow all recommendedprocedures.

All U.S. states and Canadian provinces orterritories require that infants and smallchildren be restrained in an approved childrestraint at all times while the vehicle isbeing operated. Canadian law requires thetop tether strap on forward-facing childrestraints be secured to the designatedanchor point on the vehicle.

Page 52: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0567

Lower Anchors and Tethers forCHildren System (LATCH)Your vehicle is equipped with specialanchor points that are used with the LATCH(Lower Anchors and Tethers for CHildren)system compatible child restraints. Thissystem may also be referred to as theISOFIX or ISOFIX compatible system. Withthis system, you do not have to use avehicle seat belt to secure the childrestraint.

LATCH lower anchor

WARNING

Failure to follow the warnings and instruc-tions for proper use and installation of childrestraints could result in serious injury ordeath of a child or other passengers in asudden stop or collision:

. Attach LATCH system compatible childrestraints only at the locations shown inthe illustration.

. Do not secure a child restraint in thecenter rear seating position using theLATCH lower anchors. The child restraintwill not be secured properly.

. Inspect the lower anchors by insertingyour fingers into the lower anchor area.Feel to make sure there are no obstruc-tions over the anchors such as seat beltwebbing or seat cushion material. Thechild restraint will not be securedproperly if the lower anchors are ob-structed.

SSS0637

LATCH lower anchor locationThe LATCH anchors are located at the rearof the seat cushion near the seatback. Alabel is attached to the seatback to helpyou locate the LATCH anchors.

Safety — Seats, seat belts and supplemental restraint system 1-21

Page 53: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-22 Safety — Seats, seat belts and supplemental restraint system

SSS0643

LATCH webbing-mounted attachment

Installing child restraint LATCHlower anchor attachmentsLATCH compatible child restraints includetwo rigid or webbing-mounted attachmentsthat can be connected to two anchorslocated at certain seating positions in yourvehicle. With this system, you do not haveto use a vehicle seat belt to secure thechild restraint. Check your child restraintfor a label stating that it is compatible withLATCH. This information may also be in theinstructions provided by the child restraintmanufacturer.

SSS0644

LATCH rigid-mounted attachmentThe child restraint top tether strap must beused when installing child restraints withthe LATCH lower anchor attachments orseat belts. (See “Installing top tetherstrap” (P.1-33).)

When installing a child restraint, carefullyread and follow the instructions in thismanual and those supplied with the childrestraint.

JVR0258X

Top tether anchor point locationsAnchor points are located on the rearparcel shelf.

If you have any questions when installinga top tether strap child restraint on therear seat, consult an INFINITI retailer fordetails.

WARNING

Child restraint anchorages are designed towithstand only those loads imposed bycorrectly fitted child restraints. Under nocircumstances are they to be used to attach

Page 54: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

adult seat belts, or other items or equip-ment to the vehicle. Doing so could damagethe child restraint anchorages. The childrestraint will not be properly installed usingthe damaged anchorage, and a child couldbe seriously injured or killed in a collision.

REAR-FACING CHILD RESTRAINT IN-STALLATION USING LATCHRefer to all Warnings and Cautions in the“Child safety” and “Child restraints” sec-tions before installing a child restraint.

Follow these steps to install a rear-facingchild restraint using the LATCH system:

1. Position the child restraint on the seat.Always follow the child restraint man-ufacturer’s instructions.

SSS0648

Rear-facing web-mounted — step 22. Secure the child restraint anchor at-

tachments to the LATCH lower anchors.Check to make sure the LATCH attach-ment is properly attached to the loweranchors.

SSS0649

Rear-facing rigid-mounted — step 2

SSS0639

Rear-facing — step 3

Safety — Seats, seat belts and supplemental restraint system 1-23

Page 55: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-24 Safety — Seats, seat belts and supplemental restraint system

3. For child restraints that are equippedwith webbing-mounted attachments,remove any additional slack from theanchor attachments. Press downwardand rearward firmly in the center of thechild restraint with your hand to com-press the vehicle seat cushion andseatback while tightening the webbingof the anchor attachments.

SSS0650

Rear-facing — step 44. After attaching the child restraint, test

it before you place the child in it. Pushit from side to side while holding thechild restraint near the LATCH attach-ment path. The child restraint shouldnot move more than 1 inch (25 mm),from side to side. Try to tug it forwardand check to see if the LATCH attach-ment holds the restraint in place. If therestraint is not secure, tighten theLATCH attachment as necessary, orput the restraint in another seat andtest it again. You may need to try adifferent child restraint or try installingby using the vehicle seat belt (if

applicable). Not all child restraints fitin all types of vehicles.

5. Check to make sure the child restraintis properly secured prior to each use. Ifthe child restraint is loose, repeat steps1 through 4.

Page 56: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0100

REAR-FACING CHILD RESTRAINT IN-STALLATION USING THE SEAT BELTS

WARNING

The three-point seat belt with AutomaticLocking Retractor (ALR) must be used wheninstalling a child restraint. Failure to use theALR mode will result in the child restraintnot being properly secured. The restraintcould tip over or be loose and cause injuryto a child in a sudden stop or collision. Also,it can change the operation of the frontpassenger air bag. See “Front passenger air

bag and status light” (P.1-44).

SSS0100

Rear-facing — step 1Refer to all Warnings and Cautions in the“Child safety” (P.1-17) and “Child re-straints” (P.1-19) before installing a childrestraint.

Follow these steps to install a rear-facingchild restraint using the vehicle seat beltsin the rear seats:

1. Child restraints for infants must beused in the rear-facing direction andtherefore must not be used in the frontseat. Position the child restraint on theseat. Always follow the restraint man-ufacturer’s instructions.

Safety — Seats, seat belts and supplemental restraint system 1-25

Page 57: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-26 Safety — Seats, seat belts and supplemental restraint system

SSS0654

Rear-facing — step 22. Route the seat belt tongue through the

child restraint and insert it into thebuckle until you hear and feel the latchengage. Be sure to follow the childrestraint manufacturer’s instructionsfor belt routing.

SSS0655

Rear-facing — step 33. Pull the shoulder belt until the belt is

fully extended. At this time, the seatbelt retractor is in the Automatic Lock-ing Retractor (ALR) mode (child restraintmode). It reverts to the EmergencyLocking Retractor (ELR) mode whenthe seat belt is fully retracted.

SSS0656

Rear-facing — step 44. Allow the seat belt to retract. Pull up on

the shoulder belt to remove any slackin the belt.

Page 58: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0657

Rear-facing — step 55. Remove any additional slack from the

seat belt; press downward and rear-ward firmly in the center of the childrestraint to compress the vehicle seatcushion and seatback while pulling upon the seat belt.

SSS0658

Rear-facing — step 66. After attaching the child restraint, test

it before you place the child in it. Pushit from side to side while holding thechild restraint near the seat belt path.The child restraint should not movemore than 1 inch (25 mm), from side toside. Try to tug it forward and check tosee if the belt holds the restraint inplace. If the restraint is not secure,tighten the seat belt as necessary, orput the restraint in another seat andtest it again. You may need to try adifferent child restraint. Not all childrestraints fit in all types of vehicles.

7. Check to make sure that the childrestraint is properly secured prior toeach use. If the seat belt is not locked,repeat steps 1 through 6.

After the child restraint is removed and theseat belt fully retracted, the ALR mode(child restraint mode) is canceled.

FORWARD-FACING CHILD RESTRAINTINSTALLATION USING LATCHRefer to all Warnings and Cautions in the“Child safety” and “Child restraints” sec-tions before installing a child restraint.

Follow these steps to install a forward-facing child restraint using the LATCHsystem:

1. Position the child restraint on the seat.Always follow the child restraint man-ufacturer’s instructions.

Safety — Seats, seat belts and supplemental restraint system 1-27

Page 59: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-28 Safety — Seats, seat belts and supplemental restraint system

SSS0645

Forward-facing web-mounted — step 22. Secure the child restraint anchor at-

tachments to the LATCH lower anchors.Check to make sure the LATCH attach-ment is properly attached to the loweranchors.

If the child restraint is equipped with atop tether strap, route the top tetherstrap and secure the tether strap to thetether anchor point. See “Installing toptether strap” (P.1-33). Do not installchild restraints that require the use of atop tether strap in seating positionsthat do not have a top tether anchor.

SSS0646

Forward-facing rigid-mounted — step 2

3. The back of the child restraint shouldbe secured against the vehicle seat-back.

If necessary, adjust or remove the headrestraint to obtain the correct childrestraint fit. If the head restraint isremoved, store it in a secure place. Besure to reinstall the head restraintwhen the child restraint is removed.See “Head restraints/headrests” (P.1-5)for head restraint adjustment informa-tion.

If the seating position does not have anadjustable head restraint and it isinterfering with the proper child re-straint fit, try another seating positionor a different child restraint.

Page 60: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0647

Forward-facing — step 44. For child restraints that are equipped

with webbing-mounted attachments,remove any additional slack from theanchor attachments. Press downwardand rearward firmly in the center of thechild restraint with your knee to com-press the vehicle seat cushion andseatback while tightening the webbingof the anchor attachments.

5. Tighten the tether strap according tothe manufacturer’s instructions to re-move any slack.

SSS0638

Forward-facing — step 66. After attaching the child restraint, test

it before you place the child in it. Pushit from side to side while holding thechild restraint near the LATCH attach-ment path. The child restraint shouldnot move more than 1 inch (25 mm),from side to side. Try to tug it forwardand check to see if the LATCH attach-ment holds the restraint in place. If therestraint is not secure, tighten theLATCH attachment as necessary, orput the restraint in another seat andtest it again. You may need to try adifferent child restraint. Not all childrestraints fit in all types of vehicles.

7. Check to make sure the child restraintis properly secured prior to each use. Ifthe child restraint is loose, repeat steps1 through 6.

FORWARD-FACING CHILD RESTRAINTINSTALLATION USING THE SEATBELTS

WARNING

The three-point seat belt with AutomaticLocking Retractor (ALR) must be used wheninstalling a child restraint. Failure to use theALR mode will result in the child restraintnot being properly secured. The restraintcould tip over or be loose and cause injuryto a child in a sudden stop or collision. Also,it can change the operation of the frontpassenger air bag. See “Front passenger airbag and status light” (P.1-44).

Safety — Seats, seat belts and supplemental restraint system 1-29

Page 61: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-30 Safety — Seats, seat belts and supplemental restraint system

SSS0640

Forward-facing (front passenger seat) —step 1

Refer to all Warnings and Cautions in the“Child safety” and “Child restraints” sec-tions before installing a child restraint.

Follow these steps to install a forward-facing child restraint using the vehicle seatbelt in the rear seats or in the frontpassenger seat:

1. If you must install a child restraint inthe front seat, it should be placed in aforward-facing direction only. Move theseat to the rearmost position. Childrestraints for infants must be used inthe rear-facing direction and, therefore,must not be used in the front seat.

2. Position the child restraint on the seat.Always follow the child restraint man-ufacturer’s instructions.

The back of the child restraint shouldbe secured against the vehicle seat-back.

If necessary, adjust or remove the headrestraint or headrest to obtain thecorrect child restraint fit. If the headrestraint or headrest is removed, storeit in a secure place. Be sure to reinstallthe head restraint or headrest whenthe child restraint is removed. See“Head restraints/headrests” (P.1-5) forhead restraint or headrest adjustment,removal and installation information.

If the seating position does not have anadjustable head restraint or headrestand it is interfering with the properchild restraint fit, try another seatingposition or a different child restraint.

SSS0360B

Forward-facing — step 33. Route the seat belt tongue through the

child restraint and insert it into thebuckle until you hear and feel the latchengage. Be sure to follow the childrestraint manufacturer’s instructionsfor belt routing.

If the child restraint is equipped with atop tether strap, route the top tetherstrap and secure the tether strap to thetether anchor point (rear seat installa-tion only). See “Installing top tetherstrap” (P.1-33). Do not install childrestraints that require the use of a toptether strap in seating positions that donot have a top tether anchor.

Page 62: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0651

Forward-facing — step 44. Pull the shoulder belt until the belt is

fully extended. At this time, the seatbelt retractor is in the Automatic Lock-ing Retractor (ALR) mode (child restraintmode). It reverts to Emergency LockingRetractor (ELR) mode when the seat beltis fully retracted.

SSS0652

Forward-facing — step 55. Allow the seat belt to retract. Pull up on

the shoulder belt to remove any slackin the belt.

SSS0653

Forward-facing — step 66. Remove any additional slack from the

seat belt; press downward and rear-ward firmly in the center of the childrestraint with your knee to compressthe vehicle seat cushion and seatbackwhile pulling up on the seat belt.

7. Tighten the tether strap according tothe manufacturer’s instructions to re-move any slack.

Safety — Seats, seat belts and supplemental restraint system 1-31

Page 63: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-32 Safety — Seats, seat belts and supplemental restraint system

SSS0641

Forward-facing — step 88. After attaching the child restraint, test

it before you place the child in it. Pushit from side to side while holding thechild restraint near the seat belt path.The child restraint should not movemore than 1 inch (25 mm), from side toside. Try to tug it forward and check tosee if the belt holds the restraint inplace. If the restraint is not secure,tighten the seat belt as necessary, orput the restraint in another seat andtest it again. You may need to try adifferent child restraint. Not all childrestraints fit in all types of vehicles.

9. Check to make sure the child restraintis properly secured prior to each use. Ifthe seat belt is not locked, repeat steps2 through 8.

JVR0192X

Forward-facing — step 1010. If the child restraint is installed in the

front passenger seat, place the ignitionswitch in the ON position. The frontpassenger air bag status lightshould illuminate. If this light is notilluminated, see “Front passenger airbag and status light” (P.1-44). Movethe child restraint to another seatingposition. Have the system checked byan INFINITI retailer.

After the child restraint is removed and theseat belt is fully retracted, the ALR mode(child restraint mode) is canceled.

Page 64: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVR0258X

INSTALLING TOP TETHER STRAP

WARNING

Child restraint anchorages are designed towithstand only those loads imposed bycorrectly fitted child restraints. Under nocircumstances are they to be used to attachadult seat belts, or other items or equip-ment to the vehicle. Doing so could damagethe child restraint anchorages. The childrestraint will not be properly installed usingthe damaged anchorage, and a child couldbe seriously injured or killed in a collision.

First, secure the child restraint with theLATCH lower anchors (rear outboard seatpositions only) or the seat belt, as applic-able.

1. Flip up the anchor cover from theanchor point which is located directlybehind the child seat.

2. If necessary, raise or remove the headrestraint or headrest to position the toptether strap over the top of the seat-back. If the head restraint or headrestis removed, store it in a secure place.Be sure to reinstall the head restraint orheadrest when the child restraint isremoved.

See “Head restraints/headrests” (P.1-5) for head restraint or headrestadjustment, removal and installationinformation.

Position the top tether strap over thetop of the seatback.

3. Secure the tether strap to the tetheranchor point on the rear parcel shelf.

4. Refer to the appropriate child restraintinstallation procedure steps in thissection before tightening the tetherstrap.

If you have any questions when installinga top tether strap, consult your INFINITIretailer for details.

BOOSTER SEATS

Precautions on booster seats

WARNING

If a booster seat and seat belt are not usedproperly, the risk of a child being injured ina sudden stop or collision greatly increases:

. Make sure the shoulder portion of thebelt is away from the child’s face andneck and the lap portion of the belt doesnot cross the stomach.

. Make sure the shoulder belt is notbehind the child or under the child’sarm.

. A booster seat must only be installed ina seating position that has a lap/shoulder belt.

Safety — Seats, seat belts and supplemental restraint system 1-33

Page 65: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-34 Safety — Seats, seat belts and supplemental restraint system

LRS0455

Booster seats of various sizes are offeredby several manufacturers. When selectingany booster seat, keep the following pointsin mind:

. Choose only a booster seat with a labelcertifying that it complies with FederalMotor Vehicle Safety Standard 213 orCanadian Motor Vehicle Safety Stan-dard 213.

. Check the booster seat in your vehicleto be sure it is compatible with thevehicle’s seat and seat belt system.

LRS0453

. Make sure the child’s head will beproperly supported by the booster seator vehicle seat. The seatback must be ator above the center of the child’s ears.For example, if a low back booster seat*1 is chosen, the vehicle seatbackmust be at or above the center of thechild’s ears. If the seatback is lowerthan the center of the child’s ears, ahigh back booster seat *2 should beused.

LRS0464

. If the booster seat is compatible withyour vehicle, place your child in thebooster seat and check the variousadjustments to be sure the boosterseat is compatible with your child.Always follow all recommended proce-dures.

All U.S. states and Canadian provinces orterritories require that infants and smallchildren be restrained in an approved childrestraint at all times while the vehicle isbeing operated.

The instructions in this section apply tobooster seat installation in the rear seatsor the front passenger seat.

Page 66: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Booster seat installation

CAUTION

Do not use the lap/shoulder belt AutomaticLocking Retractor (ALR) mode when using abooster seat with the seat belts.

Refer to all Warnings and Cautions in the“Child safety” (P.1-17), “Child restraints”(P.1-19) and “Booster seats” (P.1-33) be-fore installing a child restraint.

Follow these steps to install a booster seatin the rear seat or in the front passengerseat:

SSS0640

1. If you must install a booster seat in thefront seat, move the seat to the rear-most position.

2. Position the booster seat on the seat.Only place it in a forward-facing direc-tion. Always follow the booster seatmanufacturer’s instructions.

LRS0454

Front passenger position3. The booster seat should be positioned

on the vehicle seat so that it is stable.

If necessary, adjust or remove the headrestraint or headrest to obtain thecorrect booster seat fit. If the headrestraint or headrest is removed, storeit in a secure place. Be sure to reinstallthe head restraint or headrest whenthe booster seat is removed. See “Headrestraints/headrests” (P.1-5) for headrestraint or headrest adjustment, re-moval and installation information.

If the seating position does not have anadjustable head restraint or headrest

Safety — Seats, seat belts and supplemental restraint system 1-35

Page 67: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-36 Safety — Seats, seat belts and supplemental restraint system

and it is interfering with the properbooster seat fit, try another seatingposition or a different booster seat.

4. Position the lap portion of the seat beltlow and snug on the child’s hips. Besure to follow the booster seat manu-facturer’s instructions for adjusting theseat belt routing.

5. Pull the shoulder belt portion of theseat belt toward the retractor to take upextra slack. Be sure the shoulder belt ispositioned across the top, middle por-tion of the child’s shoulder. Be sure tofollow the booster seat manufacturer’sinstructions for adjusting the seat beltrouting.

6. Follow the warnings, cautions andinstructions for properly fastening aseat belt shown in “Seat belts” (P.1-10).

JVR0192X

7. If the booster seat is installed in thefront passenger seat, push the ignitionswitch to the ON position. The frontpassenger air bag status light mayor may not illuminate depending on thesize of the child and the type of boosterseat used. See “Front passenger airbag and status light” (P.1-44).

Page 68: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

PRECAUTIONS ON SUPPLEMENTALRESTRAINT SYSTEMThis Supplemental Restraint System (SRS)section contains important informationconcerning the following systems:

. Driver and passenger front-impact sup-plemental air bags (INFINITI AdvancedAir Bag System)

. Front seat-mounted side-impact supple-mental air bag

. Roof-mounted curtain side-impact sup-plemental air bag

. Seat belt with pretensionerSupplemental front-impact air bag system:The INFINITI Advanced Air Bag System canhelp cushion the impact force to the headand chest of the driver and front passengerin certain frontal collisions.

Front seat-mounted side-impact supple-mental air bag system: This system canhelp cushion the impact force to the chestand pelvis area of the driver and frontpassenger in certain side impact collisions.The side air bag is designed to inflate onthe side where the vehicle is impacted.

Roof-mounted curtain side-impact supple-mental air bag system: This system canhelp cushion the impact force to the head

of occupants in front and rear outboardseating positions in certain side impactcollisions. The curtain air bags are de-signed to inflate on the side where thevehicle is impacted.

These supplemental restraint systems aredesigned to supplement the crash protec-tion provided by the driver and passengerseat belts and are not a substitute forthem. Seat belts should always be cor-rectly worn and the occupant seated asuitable distance away from the steeringwheel, instrument panel and door fin-ishers. (See “Seat belts” (P.1-10) forinstructions and precautions on seat beltusage.)

The supplemental air bags operate onlywhen the ignition switch is in the ONposition.

After pushing the ignition switch to the ONposition, the supplemental air bag warn-ing light illuminates. The supplemental airbag warning light will turn off after about7 seconds if the systems are operational.

Safety — Seats, seat belts and supplemental restraint system 1-37

SUPPLEMENTAL RESTRAINT SYSTEM

Page 69: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-38 Safety — Seats, seat belts and supplemental restraint system

SSS0131B

SSS0132B

WARNING

. The front air bags ordinarily will notinflate in the event of a side impact, rearimpact, rollover, or lower severity frontalcollision. Always wear your seat belts tohelp reduce the risk or severity of injuryin various kinds of accidents.

. The front passenger air bag will notinflate if the passenger air bag statuslight is lit or if the front passenger seatis unoccupied. See “Front passenger airbag and status light” (P.1-44).

. The seat belts and the front air bags aremost effective when you are sitting wellback and upright in the seat with bothfeet on the floor. The front air bagsinflate with great force. Even with theINFINITI advanced air bag system, if youare unrestrained, leaning forward, sit-ting sideways or out of position in anyway, you are at greater risk of injury ordeath in a crash. You may also receiveserious or fatal injuries from the front airbag if you are up against it when itinflates. Always sit back against theseatback and as far-away as practicalfrom the steering wheel or instrument

Page 70: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

panel. Always use the seat belts.

. The driver and front passenger seat beltbuckles are equipped with sensors thatdetect if the seat belts are fastened. TheAdvanced Air Bag System monitors theseverity of a collision and seat beltusage then inflates the air bags asneeded. Failure to properly wear seatbelts can increase the risk or severity ofinjury in an accident.

. The front passenger seat is equippedwith occupant classification sensors(weight sensors) that turn the frontpassenger air bag OFF under someconditions. These sensors are only usedin this seat. Failure to be properly seatedand wearing the seat belt can increasethe risk or severity of injury in anaccident. See “Front passenger air bagand status light” (P.1-44).

. Keep hands on the outside of thesteering wheel. Placing them inside thesteering wheel rim could increase therisk of injury if the front air bag inflates.

SSS0007

SSS0006

SSS0008

SSS0009

Safety — Seats, seat belts and supplemental restraint system 1-39

Page 71: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-40 Safety — Seats, seat belts and supplemental restraint system

SSS0099

SSS0100

WARNING

. Never let children ride unrestrained orextend their hands or face out of thewindow. Do not attempt to hold them inyour lap or arms. Some examples ofdangerous riding positions are shown inthe illustrations.

. Children may be severely injured orkilled when the front air bags, side airbags or curtain air bags inflate if theyare not properly restrained. Pre-teensand children should be properly re-strained in the rear seat, if possible.

. Even with the INFINITI Advanced Air BagSystem, never install a rear-facing childrestraint in the front seat. An inflatingfront air bag could seriously injure or killyour child. See “Child restraints” (P.1-19) for details.

SSS0059A

SSS0188A

Page 72: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSS0140

SSS0162

SSS0159

WARNING

Front seat-mounted side-impact supplemen-tal air bags and roof-mounted curtain side-impact supplemental air bags:

. The side air bags and curtain air bagsordinarily will not inflate in the event ofa frontal impact, rear impact, rollover orlower severity side collision. Alwayswear your seat belts to help reduce therisk or severity of injury in various kindsof accidents.

. The seat belts, side air bags and curtain

air bags are most effective when you aresitting well back and upright in the seat.The side air bag and curtain air baginflate with great force. Do not allowanyone to place their hand, leg or facenear the side air bag on the side of theseatback of the front seat or near theside roof rails. Do not allow anyonesitting in the front seats or rear outboardseats to extend their hand out of thewindow or lean against the door. Someexamples of dangerous riding positionsare shown in the previous illustrations.

. When sitting in the rear seat, do nothold onto the seatback of the front seat.If the supplemental side air bag inflates,you may be seriously injured. Be espe-cially careful with children, who shouldalways be properly restrained. Someexamples of dangerous riding positionsare shown in the illustrations.

. Do not use seat covers on the frontseatbacks. They may interfere with sideair bag inflation.

Safety — Seats, seat belts and supplemental restraint system 1-41

Page 73: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-42 Safety — Seats, seat belts and supplemental restraint system

JVR0249X

1. Crash zone sensor2. Supplemental front air bag modules

(INFINITI Advanced Air Bags)3. Front seat-mounted side-impact sup-

plemental air bags4. Occupant classification sensors

(weight sensors)

5. Occupant classification system con-trol unit

6. Roof-mounted curtain side-impactsupplemental air bags

7. Roof-mounted curtain side-impactsupplemental air bag inflators

8. Air bag Control Unit (ACU)9. Satellite sensors10. Seat belts with pretensioners11. Lap outer pretensioners

INFINITI ADVANCED AIR BAG SYS-TEM (front seats)

WARNING

To ensure proper operation of the passen-ger’s advanced air bag system, pleaseobserve the following items.

. Do not allow a passenger in the rear seatto push or pull on the seatback pocket.

. Do not place heavy loads heavier than 9lbs. (4 kg) on the seatback, headrestraint or in the seatback pocket.

. Do not store luggage behind the seatthat can press into the seatback.

. Confirm the operating condition with thefront passenger air bag status light.

. If you notice that the front passenger airbag status light is not operating inaccordance with the above description,please take your vehicle to your INFINITIretailer to check the passenger seatadvanced air bag system.

Page 74: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Until you have confirmed with yourretailer that your passenger seat ad-vanced air bag is working properly,position the occupants in the rearseating positions.

This vehicle is equipped with the INFINITIAdvanced Air Bag System for the driver andfront passenger seats. This system isdesigned to meet certification require-ments under U.S. regulations. It is alsopermitted in Canada. However, all of theinformation, cautions and warnings in thismanual still apply and must be followed.

The driver supplemental front-impact airbag is located in the center of the steeringwheel. The front passenger supplementalfront-impact air bag is mounted in theinstrument panel above the glove box. Thefront air bags are designed to inflate inhigher severity frontal collisions, althoughthey may inflate if the forces in anothertype of collision are similar to those of ahigher severity frontal impact. They maynot inflate in certain frontal collisions.Vehicle damage (or lack of it) is not alwaysan indication of proper front air bagoperation.

The INFINITI Advanced Air Bag System has

dual stage air bag inflators. The systemmonitors information from the crash zonesensor, the Air bag Control Unit (ACU), seatbelt buckle switches and the occupantclassification sensors (weight sensors).Inflator operation is based on the severityof a collision and seat belt usage for thedriver. For the front passenger, the occu-pant classification sensors are also mon-itored. Based on information from thesensors, only one front air bag may inflatein a crash, depending on the crash severityand whether the front occupants are beltedor unbelted. Additionally, the front pas-senger air bag may be automatically turnedOFF under some conditions, depending onthe information provided by the occupantclassification sensors. If the front passen-ger air bag is OFF, the passenger air bagstatus light will be illuminated (if the seatis unoccupied, the light will not beilluminated, but the air bag will be off).(See “Front passenger air bag and statuslight” (P.1-44) for further details.) One frontair bag inflating does not indicate improperperformance of the system.

If you have any questions about your airbag system, contact an INFINITI retailer. Ifyou are considering modification of your

vehicle due to a disability, you may alsocontact an INFINITI retailer. Contact infor-mation is contained in the front of thisOwner’s Manual.

When a front air bag inflates, a fairly loudnoise may be heard, followed by release ofsmoke. This smoke is not harmful and doesnot indicate a fire. Care should be takennot to inhale it, as it may cause irritationand choking. Those with a history of abreathing condition should get fresh airpromptly.

Front air bags, along with the use of seatbelts, help to cushion the impact force onthe head and chest of the front occupants.They can help save lives and reduceserious injuries. However, an inflating frontair bag may cause facial abrasions or otherinjuries. Front air bags do not providerestraint to the lower body.

Even with INFINITI advanced air bags, seatbelts should be correctly worn and thedriver and passenger seated upright as faras practical away from the steering wheelor instrument panel. The front air bagsinflate quickly in order to help protect thefront occupants. Because of this, the forceof the front air bag inflating can increasethe risk of injury if the occupant is too

Safety — Seats, seat belts and supplemental restraint system 1-43

Page 75: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-44 Safety — Seats, seat belts and supplemental restraint system

close to, or is against, the air bag moduleduring inflation.

The front air bags deflate quickly after acollision.

The front air bags operate only when theignition switch is in the ON position.

After pushing the ignition switch to the ONposition, the supplemental air bag warn-ing light illuminates. The supplemental airbag warning light will turn off after about7 seconds if the system is operational.

JVR0192X

Front passenger air bag and statuslight

WARNING

The front passenger air bag is designed toautomatically turn OFF under some condi-tions. Read this section carefully to learnhow it operates. Proper use of the seat, seatbelt and child restraints is necessary formost effective protection. Failure to followall instructions in this manual concerningthe use of seats, seat belts and childrestraints can increase the risk or severity

of injury in an accident.

Status light:

The front passenger air bag status lightis located on the instrument panel.

After the ignition switch is placed in the ONposition, the front passenger air bag statuslight illuminates for about 7 seconds andthen turns off or illuminates depending onthe front passenger seat occupied status.The light operates as follows:

. Unoccupied passenger seat: The isOFF and the front passenger air bag isOFF and will not inflate in a crash.

. Passenger seat occupied by a smalladult, child or child restraint as out-lined in this section: The illumi-nates to indicate that the frontpassenger air bag is OFF and will notinflate in a crash.

. Occupied passenger seat and the pas-senger meets the conditions outlined inthis section: The light is OFF toindicate that the front passenger airbag is operational.

Front passenger air bag:

The front passenger air bag is designed toautomatically turn OFF when the vehicle is

Page 76: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

operated under some conditions as de-scribed below as permitted by U.S. regula-tions. If the front passenger air bag is OFF,it will not inflate in a crash. The driver airbag and other air bags in your vehicle arenot part of this system.

The purpose of the regulation is to helpreduce the risk of injury or death from aninflating air bag to certain front passengerseat occupants, such as children, byrequiring the air bag to be automaticallyturned OFF.

The occupant classification sensors(weight sensors) are on the seat cushionframe under the front passenger seat andare designed to detect an occupant andobjects on the seat. For example, if a childis in the front passenger seat, the Ad-vanced Air Bag System is designed to turnthe passenger air bag OFF in accordancewith the regulations. Also, if a childrestraint of the type specified in theregulations is on the seat, the occupantclassification sensor can detect it andcause the air bag to turn OFF.

Front passenger seat adult occupants whoare properly seated and using the seat beltas outlined in this manual should notcause the passenger air bag to be auto-

matically turned OFF. For small adults itmay be turned OFF, however, if theoccupant does not sit in the seat properly(for example, by not sitting upright, bysitting on an edge of the seat, or byotherwise being out of position), this couldcause the sensor to turn the air bag OFF.Always be sure to be seated and wearingthe seat belt properly for the most effectiveprotection by the seat belt and supple-mental air bag.

INFINITI recommends that pre-teens andchildren be properly restrained in a rearseat. INFINITI also recommends that appro-priate child restraints and booster seats beproperly installed in a rear seat. If this isnot possible, the occupant classificationsensors are designed to operate as de-scribed above to turn the front passengerair bag OFF for specified child restraints.Failing to properly secure child restraintsand to use the ALR mode (child restraintmode) may allow the restraint to tip ormove in an accident or sudden stop. Thiscan also result in the passenger air baginflating in a crash instead of being OFF.(See “Child restraints” (P.1-19) for properuse and installation.)

If the front passenger seat is not occupied,

the passenger air bag is designed not toinflate in a crash. However, heavy objectsplaced on the seat could result in air baginflation, because of the object beingdetected by the occupant classificationsensor. Other conditions could also resultin air bag inflation, such as if a child isstanding on the seat, or if two children areon the seat, contrary to the instructions inthis manual. Always be sure that you andall vehicle occupants are seated andrestrained properly.

Using the passenger air bag status light,you can monitor when the front passengerair bag is automatically turned OFF with theseat occupied. The light will not illuminatewhen the front passenger seat is unoccu-pied.

If an adult occupant is in the seat but thepassenger air bag status light is illumi-nated (indicating that the air bag is OFF), itcould be that the person is a small adult,or is not sitting on the seat properly.

If a child restraint must be used in the frontseat, the passenger air bag status lightmay or may not be illuminated, dependingon the size of the child and the type ofchild restraint being used. If the passengerair bag status light is not illuminated

Safety — Seats, seat belts and supplemental restraint system 1-45

Page 77: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-46 Safety — Seats, seat belts and supplemental restraint system

(indicating that the air bag might inflate ina crash), it could be that the child restraintor seat belt is not being used properly.Make sure that the child restraint isinstalled properly, the seat belt is usedproperly and the occupant is positionedproperly. If the passenger air bag statuslight is still not illuminated, reposition theoccupant or child restraint in a rear seat.

If the passenger air bag status light will notilluminate even though you believe that thechild restraint, the seat belts and theoccupant are properly positioned, thesystem may be sensing an unoccupiedseat (in which case the air bag is OFF). YourINFINITI retailer can check that the systemis OFF by using a special tool. However,until you have confirmed with your retailerthat your air bag is working properly,reposition the occupant or child restraintin a rear seat.

The INFINITI Advanced Air Bag System andpassenger air bag status light will take afew seconds to register a change in thepassenger seat status. However, if the seatbecomes unoccupied, the air bag statuslight will remain off.

If a malfunction occurs in the frontpassenger air bag system, the supplemen-

tal air bag warning light , located in themeter and gauges area will blink. Have thesystem checked by an INFINITI retailer.

Other supplemental front-impactair bag precautions

WARNING

. Do not place any objects on the steeringwheel pad or on the instrument panel.Also, do not place any objects betweenany occupant and the steering wheel orinstrument panel. Such objects maybecome dangerous projectiles and causeinjury if the front air bags inflate.

. Do not place objects with sharp edgeson the seat. Also, do not place heavyobjects on the seat that will leavepermanent impressions in the seat. Suchobjects can damage the seat or occupantclassification sensors (weight sensors).This can affect the operation of the airbag system and result in serious perso-nal injury.

. Do not use water or acidic cleaners (hotsteam cleaners) on the seat. This candamage the seat or occupant classifica-tion sensors. This can also affect the

operation of the air bag system andresult in serious personal injury.

. Immediately after inflation, several frontair bag system components will be hot.Do not touch them; you may severelyburn yourself.

. No unauthorized changes should bemade to any components or wiring ofthe air bag system. This is to preventaccidental inflation of the supplementalair bag or damage to the supplementalair bag system.

. Do not make unauthorized changes toyour vehicle’s electrical system, suspen-sion system or front end structure. Thiscould affect proper operation of the frontair bag system.

. Tampering with the air bag system mayresult in serious personal injury. Tamper-ing includes changes to the steeringwheel and the instrument panel assem-bly by placing material over the steeringwheel pad and above the instrumentpanel or by installing additional trimmaterial around the air bag system.

. Removing or modifying the front pas-senger seat may affect the function ofthe air bag system and result in serious

Page 78: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

personal injury.

. Modifying or tampering with the frontpassenger seat may result in seriouspersonal injury. For example, do notchange the front seats by placingmaterial on the seat cushion or byinstalling additional trim material, suchas seat covers, on the seat that is notspecifically designed to assure properair bag operation. Additionally, do notstow any objects under the front pas-senger seat or the seat cushion andseatback. Such objects may interferewith the proper operation of the occu-pant classification sensors.

. No unauthorized changes should bemade to any components or wiring ofthe seat belt system. This may affect thefront air bag system. Tampering with theseat belt system may result in seriouspersonal injury.

. Work on and around the front air bagsystem should be done by an INFINITIretailer. Installation of electrical equip-ment should also be done by an INFINITIretailer. The Supplemental RestraintSystem (SRS) wiring harnesses* shouldnot be modified or disconnected. Un-authorized electrical test equipment and

probing devices should not be used onthe air bag system.

. A cracked windshield should be replacedimmediately by a qualified repair facility.A cracked windshield could affect thefunction of the supplemental air bagsystem.

* The SRS wiring harness connectorsare yellow and orange for easyidentification.

When selling your vehicle, we request thatyou inform the buyer about the front airbag system and guide the buyer to theappropriate sections in this Owner’s Man-ual.

SSS0521

FRONT SEAT-MOUNTED SIDE-IM-PACT SUPPLEMENTAL AIR BAG ANDROOF-MOUNTED CURTAIN SIDE-IM-PACT SUPPLEMENTAL AIR BAG SYS-TEMSThe side air bags are located in the outsideof the seatback of the front seats. Thecurtain air bags are located in the side roofrails. However, all of the information,cautions and warnings in this manual stillapply and must be followed. The side airbags and curtain air bags are designed toinflate in higher severity side collisions,although they may inflate if the forces in

Safety — Seats, seat belts and supplemental restraint system 1-47

Page 79: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-48 Safety — Seats, seat belts and supplemental restraint system

another type of collision are similar tothose of a higher severity side impact. Theyare designed to inflate on the side wherethe vehicle is impacted. They may notinflate in certain side collisions on the sidewhere the vehicle is impacted.

Vehicle damage (or lack of it) is not alwaysan indication of proper supplemental sideair bag and curtain side-impact air bagoperation.

When side air bags and curtain air bagsinflate, a fairly loud noise may be heard,followed by release of smoke. This smokeis not harmful and does not indicate a fire.Care should be taken not to inhale it, as itmay cause irritation and choking. Thosewith a history of a breathing conditionshould get fresh air promptly.

Side air bags, along with the use of seatbelts, help to cushion the impact force onthe chest and pelvis of the front occupants.Curtain air bags help to cushion the impactforce to the head of occupants in the frontand rear outboard seating positions. Theycan help save lives and reduce seriousinjuries. However, an inflating side air bagsand curtain air bags may cause abrasionsor other injuries. Side air bags and curtainair bags do not provide restraint to the

lower body.

The seat belts should be correctly wornand the driver and passenger seatedupright as far as practical away from theside air bag. Rear seat passengers shouldbe seated as far away as practical from thedoor finishers and side roof rails. The sideair bags and curtain air bags inflate quicklyin order to help protect the occupants.Because of this, the force of the side airbags and curtain air bags inflating canincrease the risk of injury if the occupant istoo close to, or is against, these air bagmodules during inflation. The side air bagsand curtain air bags will deflate quicklyafter the collision is over.

The side air bags and curtain air bagsoperate only when the ignition switch is inthe ON position.

After pushing the ignition switch to the ONposition, the supplemental air bag warn-ing light illuminates. The air bag warninglight will turn off after about 7 seconds ifthe systems are operational.

WARNING

. Do not place any objects near theseatback of the front seats. Also, donot place any objects (an umbrella, bag,etc.) between the front door finisher andthe front seat. Such objects may becomedangerous projectiles and cause injury ifside air bag inflates.

. Right after inflation, several side airbags and curtain air bag system compo-nents will be hot. Do not touch them;you may severely burn yourself.

. No unauthorized changes should bemade to any components or wiring ofside air bag and curtain air bags. This isto prevent damage to or accidentalinflation of the side air bag and curtainair bag systems.

. Do not make unauthorized changes toyour vehicle’s electrical system, suspen-sion system or side panel. This couldaffect proper operation of the side airbag and curtain air bag systems.

. Tampering with the air bag system mayresult in serious personal injury. Forexample, do not change the front seatsby placing material near the seatback or

Page 80: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

by installing additional trim material,such as seat covers, around the side airbags.

. Work around and on the side air bag andcurtain air bag systems should be doneby an INFINITI retailer. Installation ofelectrical equipment should also bedone by an INFINITI retailer. The Supple-mental Restraint System (SRS) wiringharnesses* should not be modified ordisconnected. Unauthorized electricaltest equipment and probing devicesshould not be used on the side-impactair bag system.

* The SRS wiring harness connectorsare yellow and orange for easyidentification.

When selling your vehicle, we request thatyou inform the buyer about the side air bagand curtain air bag systems and guide thebuyer to the appropriate sections in thisOwner’s Manual.

SEAT BELTS WITH PRETENSIONERS(front seats)

WARNING

. The pretensioners cannot be reused afteractivation. They must be replaced to-gether with the retractor and buckle as aunit.

. If the vehicle becomes involved in acollision but a pretensioner is notactivated, be sure to have the preten-sioner system checked and, if necessary,replaced by an INFINITI retailer.

. No unauthorized changes should bemade to any components or wiring ofthe pretensioners. This is to preventdamage to or accidental activation of thepretensioner system. Tampering with thepretensioner system may result in ser-ious personal injury.

. Work around and on the pretensionersshould be done by an INFINITI retailer.Installation of electrical equipmentshould also be done by an INFINITIretailer. Unauthorized electrical testequipment and probing devices shouldnot be used on the pretensioner system.

. If you need to dispose of the preten-sioner or scrap the vehicle, contact anINFINITI retailer. Correct pretensionerdisposal procedures are set forth in theappropriate INFINITI Service Manual.Incorrect disposal procedures couldcause personal injury.

The pretensioner system may activate withthe supplemental air bag system in certaintypes of collisions. Working with the seatbelt retractor, it helps tighten the seat beltwhen the vehicle becomes involved incertain types of collisions, helping torestrain front seat occupants.

The pretensioner is encased with the seatbelt retractor. These seat belts are used thesame way as conventional seat belts.

When a pretensioner seat belt activates,smoke is released and a loud noise may beheard. The smoke is not harmful, and itdoes not indicate a fire. Care should betaken not to inhale it as it may causeirritation and choking. Those with a historyof a breathing condition should get freshair promptly.

After pretensioner activation, load limitersallow the seat belt to release webbing (ifnecessary) to reduce forces against the

Safety — Seats, seat belts and supplemental restraint system 1-49

Page 81: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-50 Safety — Seats, seat belts and supplemental restraint system

chest.

The supplemental air bag warning lightis used to indicate malfunctions in the

pretensioner system. (See “Supplementalair bag warning light” (P.1-50) for moredetails.) If the operation of the supple-mental air bag warning light indicatesthere is a malfunction, have the systemchecked by an INFINITI retailer.

When selling your vehicle, we request thatyou inform the buyer about the seat beltpretensioners and guide the buyer to theappropriate sections in this Owner’s Man-ual.

SSS1016

SUPPLEMENTAL AIR BAG WARNINGLABELSWarning labels about the supplementalfront-impact air bag systems are placed inthe vehicle as shown in the illustration.

SRS air bagThe warning labels *1 are located on thesurface of the sun visors.

SPA1097

SUPPLEMENTAL AIR BAG WARNINGLIGHTThe supplemental air bag warning light,displaying in the instrument panel,monitors the circuits for the air bagsystems, pretensioners and all relatedwiring.

When the ignition switch is in the ONposition, the supplemental air bag warninglight illuminates for about 7 seconds andthen turns off. This means the SRS air bagsystems are operational.

If any of the following conditions occur, theair bag and/or pretensioner systems need

Page 82: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

servicing:

. The supplemental air bag warning lightremains on after approximately 7 sec-onds.

. The supplemental air bag warning lightflashes intermittently.

. The supplemental air bag warning lightdoes not come on at all.

Under these conditions, the air bag orpretensioner systems may not operateproperly. They must be checked andrepaired. Take your vehicle to the nearestINFINITI retailer.

WARNING

If the supplemental air bag warning light ison, it could mean that the front air bag, sideair bag, curtain air bag and/or pretensionersystems will not operate in an accident. Tohelp avoid injury to yourself or others, haveyour vehicle checked by a retailer as soon aspossible.

REPAIR AND REPLACEMENT PROCE-DUREThe front air bags, side air bags, curtain airbags and pretensioners are designed toactivate on a one-time-only basis. As areminder, unless it is damaged, the sup-plemental air bag warning light will remainilluminated after inflation has occurred.Repair and replacement of these systemsshould be done only by an INFINITI retailer.

When maintenance work is required on thevehicle, the front air bags, side air bags,curtain air bags, pretensioners and relatedparts should be pointed out to the personconducting the maintenance. The ignitionswitch should always be in the LOCKposition when working under the hood orinside the vehicle.

WARNING

. Once a front air bag, side air bag, orcurtain air bag has inflated, the air bagmodule will not function again and mustbe replaced. Additionally, the activatedpretensioner must also be replaced. Theair bag module and pretensioner shouldbe replaced by an INFINITI retailer. The

air bag module and pretensioner systemcannot be repaired.

. The front air bag, side air bag, curtain airbag and the pretensioner system shouldbe inspected by an INFINITI retailer ifthere is any damage to the front end orside portion of the vehicle.

. If you need to dispose of the supple-mental air bag or pretensioner or scrapthe vehicle, contact an INFINITI retailer.Correct supplemental air bag and seatbelt pretensioner system disposal pro-cedures are set forth in the appropriateINFINITI Service Manual. Incorrect dis-posal procedures could cause personalinjury.

Safety — Seats, seat belts and supplemental restraint system 1-51

Page 83: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1-52 Safety — Seats, seat belts and supplemental restraint system

MEMO

Page 84: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2 Instruments and controls

Cockpit ................................................................ 2-3Instrument panel ................................................. 2-5Meters and gauges.............................................. 2-6

Speedometer and odometer ............................ 2-7Tachometer...................................................... 2-8Assist charge gauge ........................................ 2-8Fuel gauge ...................................................... 2-8

Compass (if so equipped) .................................... 2-9Zone variation change procedure................... 2-10

Warning/indicator lights andaudible reminders ............................................. 2-12

Checking bulbs.............................................. 2-12Warning lights............................................... 2-12Indicator lights .............................................. 2-18Audible reminders ......................................... 2-20

Vehicle information display................................ 2-21Indicators for operation ................................. 2-24Indicators for maintenance ............................ 2-29Trip computer................................................ 2-31Clock and outside air temperature................. 2-34

Security systems ............................................... 2-35Vehicle Security System ................................ 2-35INFINITI Vehicle Immobilizer System .............. 2-37

Windshield wiper and washer switch................. 2-38Rain-sensing auto wiper system (ifso equipped) ............................................... 2-40

Rear window and outside mirrordefroster switch ................................................ 2-41Headlight and turn signal switch....................... 2-41

Headlight switch.......................................... 2-41Turn signal switch........................................ 2-47Fog light switch ........................................... 2-47

Horn ................................................................. 2-47Vehicle Dynamic Control (VDC) OFF switch......... 2-48Power outlet ..................................................... 2-48Ashtray (if so equipped).................................... 2-49

Rear............................................................. 2-49Storage............................................................. 2-49

Cup holders................................................. 2-49Soft bottle holder ........................................ 2-50Sunglasses holder ....................................... 2-51Glove box .................................................... 2-51Console box................................................. 2-52Card holder.................................................. 2-52Storage box................................................. 2-52Coat hooks .................................................. 2-53Trunk hooks................................................. 2-53

Page 85: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Windows ........................................................... 2-54Power windows ............................................. 2-54

Moonroof........................................................... 2-56Automatic moonroof ...................................... 2-56

Interior lights..................................................... 2-58Map lights..................................................... 2-58Console light (if so equipped)........................ 2-58Personal lights .............................................. 2-59Interior light control switch............................ 2-59

Vanity mirror lights............................................ 2-60Trunk light......................................................... 2-60

Courtesy light ................................................... 2-61HomeLink® Universal Transceiver ...................... 2-61

Programming HomeLink®............................. 2-62Programming HomeLink® for Canadiancustomers and gate openers........................ 2-63Operating the HomeLink®

Universal Transceiver ................................... 2-64Programming troubleshooting...................... 2-64Clearing the programmed information.......... 2-64Reprogramming a singleHomeLink® button....................................... 2-64If your vehicle is stolen ............................... 2-65

Page 86: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVC0472X

1. Side ventilator (P.4-2)2. Headlight, fog light and turn signal

switch (P.2-41)3. Steering wheel

— Horn (P.2-47)

— Driver supplemental air bag(P.1-37)— Heated steering wheel (if soequipped)*— Steering system (P.5-104)

4. Windshield wiper and washer switch(P.2-38)

5. Hazard warning flasher switch (P.6-2)6. Shift lever (P.5-14)7. INFINITI controller*8. Vehicle Dynamic Control (VDC) OFF

switch (P.2-48, P.5-108)9. Trunk lid release switch (P.3-19)10. Instrument brightness control switch

(P.2-46)11. TRIP/RESET switch for twin trip od-

ometer (P.2-7)12. Electric tilting/telescopic steering

wheel switch (P.3-24)13. Steering-wheel-mounted controls (left

side)— Audio control steering switch*— Hands-Free Phone System switch*— Voice recognition system switch*

14. Steering-wheel-mounted controls(right side)— Trip computer switch (P.2-31)— Cruise control switches (if soequipped) (P.5-56)— Intelligent Cruise Control (ICC)switches (if so equipped) (P.5-58)— Dynamic driver assistance switch(if so equipped) (P.5-30, P.5-37,

Instruments and controls 2-3

COCKPIT

Page 87: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-4 Instruments and controls

P.5-79)15. INFINITI Drive Mode Selector (P.5-21)*: Refer to the Infiniti InTouch Owner’s

Manual.

Page 88: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVC0427X

1. Paddle shifter (if so equipped) (P.5-16)2. Meters and gauges (P.2-6)

— Clock (P.2-34)3. Push-button ignition switch (P.5-10)4. Center ventilator (P.4-2)5. Automatic climate control system*

6. Upper touch screen display (upperdisplay)* and Navigation system* (ifso equipped)

7. Lower touch screen display (lowerdisplay)*

8. Rear window and outside mirror

defroster switch (P.2-41)9. Front passenger supplemental air bag

(P.1-37)10. Hood release handle (P.3-18)11. Fuse box cover (P.8-24)12. Parking brake (P.5-20)13. Seat heater switch*14. Audio system*15. Trunk release power cancel switch

(P.3-20)16. Glove box (P.2-51)*: Refer to the Infiniti InTouch Owner’s

Manual.

Instruments and controls 2-5

INSTRUMENT PANEL

Page 89: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-6 Instruments and controls

JVC0473X

1. Tachometer* (P.2-8)2. Warning/Indicator lights (P.2-12)3. Speedometer* (P.2-7)4. Assist charge gauge*

(P.Hybrid System-5, P.2-8)5. Vehicle information display (P.2-21)/

Odometer/twin trip odometer (P.2-7)6. Fuel gauge* (P.2-8)

*: The needle indicators may move slightlyafter the ignition switch is placed in theOFF position. This is not a malfunction.

CAUTION

. For cleaning, use a soft cloth, dampenedwith water. Never use a rough cloth,alcohol, benzine, thinner or any kind ofsolvent or paper towel with a chemicalcleaning agent. They will scratch orcause discoloration to the lens.

. Do not spray any liquid such as water onthe meter lens. Spraying liquid maycause the system to malfunction.

METERS AND GAUGES

Page 90: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0636X

Speedometer

SPEEDOMETER AND ODOMETER

SpeedometerThe speedometer indicates vehicle speedin miles per hour (MPH) and kilometers perhour (km/h).

JVI0637X

Odometer/twin trip odometer

Odometer/twin trip odometerThe odometer *1 and twin trip odometer*2 are displayed in the vehicle informationdisplay when the ignition switch is in theON position.

The odometer records the total distancethe vehicle has been driven.

The twin trip odometer records the dis-tance of individual trips.

Changing the display:

Pushing the TRIP RESET switch *3 underthe combination meter panel changes thedisplay as follows:

TRIP A ? TRIP B ? TRIP A

Resetting the trip odometer:

Pushing the TRIP RESET switch*3 for morethan 1 second resets the trip odometer tozero.

Instruments and controls 2-7

Page 91: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-8 Instruments and controls

JVI0733X

TACHOMETERThe tachometer indicates engine speed inrevolutions per minute (RPM). Do not revthe engine into the red zone *1 .

The scale length and the red zone vary withthe engine model.

CAUTION

When engine speed approaches the redzone, shift to a higher gear or reduce enginespeed. Operating the engine in the red zonemay cause serious engine damage.

JVI0683X

ASSIST CHARGE GAUGEThe gauge indicates the condition of theelectric motor.

When the needle is between the center and“charge” *1 side, this indicates thatthe electric motor is generating power torecharge the Li-ion battery.

When the needle is between the center andthe PWR *2 side, this indicates that theelectric motor is powering the drive wheelsand the Li-ion battery is discharging.

JVI0640X

FUEL GAUGEThe gauge indicates the approximate fuellevel in the tank.

The gauge may move slightly duringbraking, turning, acceleration, or going upor down hills.

The gauge needle returns to “0” (Empty)after the ignition switch is pushed to theOFF position.

Refill the fuel tank before the gaugeregisters “0” (Empty).

The low fuel warning light illuminateson the meter when the fuel level is gettinglow. Refuel as soon as it is convenient,

Page 92: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

preferably before the gauge reaches “0”.There will be a small reserve of fuel in thetank when the fuel gauge needle reaches“0”.

The indicates that the fuel-filler door islocated on the right side of the vehicle.

CAUTION

. If the vehicle runs out of fuel, themalfunction indicator light (MIL) maycome on. Refuel as soon as possible.After a few driving trips, the lightshould turn off. If the light remains onafter a few driving trips, have the vehicleinspected by an INFINITI retailer.

. For additional information, see “Mal-function Indicator Light (MIL)” (P.2-19).

SIC3181

When the ignition switch is pushed to theON position, the compass display *B willindicate the direction of the vehicle’sheading.

If the display reads “C”, calibrate thecompass by driving the vehicle in 3complete circles at less than 5 MPH (8

km/h). You can also calibrate the compassby driving your vehicle on your everydayroute. The compass will be calibrated onceit has tracked 3 complete circles.

To turn on and off the compass manually,push the switch *A while the ignitionswitch is in the ON position.

Instruments and controls 2-9

COMPASS (if so equipped)

Page 93: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-10 Instruments and controls

SIC0611B

Zone map

ZONE VARIATION CHANGE PROCE-DUREThe difference between magnetic north andgeographical north is known as variance.In some areas, this difference can some-times be great enough to cause falsecompass readings. Follow these instruc-tions to set the variance for your particularlocation if this happens:

1. Push the switch for more than 3seconds. The current zone number willappear in the display.

2. Find your current location and variancenumber on the zone map.

3. Push the switch repeatedly untilthe new zone number appears in thedisplay, then release the switch. Afteryou release the switch, the display willshow a compass direction within a fewseconds.. If the compass deviates from the

correct indication soon after re-peated adjustment, have the com-pass checked at an INFINITI retailer.

. The compass may not indicate thecorrect compass point in tunnels orwhile driving up or down a steep hill.(The compass returns to the correct

Page 94: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

compass point when the vehiclemoves to an area where the geo-magnetism is stabilized.)

CAUTION

. Do not install a ski rack, antenna, etc.,which are attached to the vehicle bymeans of a magnet. They affect theoperation of the compass.

. When cleaning the mirror, use a papertowel or similar material dampened withglass cleaner. Do not spray glass cleanerdirectly on the mirror as it may cause theliquid cleaner to enter the mirror hous-ing.

Instruments and controls 2-11

Page 95: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-12 Instruments and controls

12-volt battery charge warning light Power steering warning light High beam assist indicator light*

Anti-lock Braking System (ABS) warninglight

Seat belt warning light and chime High beam indicator light

Supplemental air bag warning light Malfunction Indicator Light (MIL)

Brake system warning light (yellow) Vehicle Dynamic Control (VDC) warning light READY to drive indicator light

Brake warning light (red) Approaching Vehicle Sound for Pedestrians(VSP) OFF indicator light Security indicator light

Direct Response Hybrid® System warninglight ECO drive indicator light Turn signal/hazard indicator lights

Forward emergency braking system warninglight* EV indicator light Vehicle Dynamic Control (VDC) off indicator

light

Low fuel warning light Exterior light indicator

Low tire pressure warning light Front fog light indicator light *: if so equipped

Master warning light Front passenger air bag status light

CHECKING BULBSWith all doors closed, apply the parkingbrake and push the ignition switch to theON position without starting the INFINITIDirect Response Hybrid® System. Thefollowing lights will come on (if soequipped):

, or , , , , ,

The following lights come on briefly andthen go off (if so equipped):

, or , , , ,

If any light does not come on, it mayindicate a burned-out bulb or an opencircuit in the electrical system. Have thesystem checked by an INFINITI retailer.

Some indicators and warnings are alsodisplayed in the vehicle information dis-play between the speedometer and tach-ometer. (See “Vehicle information display”(P.2-21).)

WARNING LIGHTS

12-volt battery charge warninglightWhen the ignition switch is in the ONposition, the 12-volt battery charge warn-ing light illuminates. After starting thehybrid system, the light turns off.

If the light continues to illuminate afterstarting the hybrid system, it may indicate

WARNING/INDICATOR LIGHTS ANDAUDIBLE REMINDERS

Page 96: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

the charging system is not functioningproperly. See an INFINITI retailer immedi-ately.

CAUTION

The charging system may not be functioningproperly if the 12-volt battery charge warn-ing light comes on while the hybrid systemis running. The hybrid system will stopoperating when the 12-volt battery becomesdischarged. Immediately stop the vehicle ina safe place and contact an INFINITI retailer.

or Anti-lock BrakingSystem (ABS) warning lightWhen the ignition switch is in the ONposition, the Anti-lock Braking System(ABS) warning light illuminates and thenturns off. This indicates the ABS is opera-tional.

If the ABS warning light illuminates whilethe hybrid system is running, or whiledriving, it may indicate the ABS is notfunctioning properly. Have the systemchecked by an INFINITI retailer.

If an ABS malfunction occurs, the anti-lockfunction is turned off. The brake system

then operates normally, but without anti-lock assistance. (See “Anti-lock BrakingSystem (ABS)” (P.5-107).)

Brake system warning light(yellow)This light will illuminate after the hybridsystem is started and then turns off after afew seconds.

WARNING

If both the brake system warning light(yellow) and the brake warning light (red)illuminate when the parking brake is re-leased and the hybrid system is on, do notdrive the vehicle. More brake pedal effortthan normal will be required and there willbe a significant reduction in brake perfor-mance, which could result in an accident.Immediately stop the vehicle in a safelocation and contact an INFINITI retailer.

If the brake system warning light (yellow)illuminates when the ignition switch is inthe ON position, it may indicate a malfunc-tion in the brake system or one of thefollowing other functions.

. Regenerative brake system

. Hill start assist system

. Rise-up and build-up functionSee an INFINITI retailer for an inspection assoon as possible.

A chime sounds if a malfunction occurs inthe brake system power supply.

or Brake warning light(red)This light functions for both the parkingbrake and the foot brake systems.

Parking brake indicator:

When the ignition switch is in the ONposition, the light comes on when theparking brake is applied.

Low brake fluid warning:

When the ignition switch is in the ONposition, the light warns of a low brakefluid level. If the light comes on with theparking brake not applied, stop the vehicleand perform the following:

1. Check the brake fluid level. If brakefluid is low, add fluid and have thesystem checked by your INFINITI retai-ler. (See “Brake fluid” (P.8-15).)

Instruments and controls 2-13

Page 97: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-14 Instruments and controls

2. If the brake fluid level is correct, havethe warning system checked by anINFINITI retailer.

Brake system malfunction warning:

If the brake warning light (red) and thefollowing warning light illuminate at thesame time when the parking brake isreleased and the brake fluid level issufficient, there may be a malfunction inthe brake system.

. Brake system warning light (yellow)

WARNING

If both the brake system warning light(yellow) and the brake warning light (red)illuminate when the parking brake is re-leased and the hybrid system is on, do notdrive the vehicle. More brake pedal effortthan normal will be required and there willbe a significant reduction in brake perfor-mance, which could result in an accident.Immediately stop the vehicle in a safelocation and contact an INFINITI retailer.

A chime sounds if a malfunction occurs inthe brake system power supply.

. Anti-lock Braking System (ABS) warninglight— Avoid driving at high speed and

sudden braking, and see an INFINITIretailer as soon as possible for aninspection.

WARNING

. Your brake system may not be workingproperly if the brake warning light (red)is on. Driving could be dangerous. If youjudge it to be safe, drive carefully to thenearest service station for repairs.Otherwise, have your vehicle towedbecause driving it could be dangerous.

. Pressing the brake pedal with the hybridsystem stopped and/or low brake fluidlevel may increase your stopping dis-tance and braking will require greaterpedal effort as well as pedal travel.

. If the brake fluid level is below theminimum or MIN mark on the brake fluidreservoir, do not drive until the brakesystem has been checked at an INFINITIretailer.

Direct Response Hybrid® Sys-tem warning lightWhen the ignition switch is in the ONposition, the Direct Response Hybrid®

System (hybrid system) warning lightilluminates. After starting the hybrid sys-tem, the hybrid system warning light turnsoff.

If the hybrid system warning light illumi-nates while driving, it may indicate thatthere is a malfunction in the electric motorand/or other hybrid system components.

Stop your vehicle immediately and contactyour INFINITI retailer.

If the hybrid system warning light blinkswhile driving, it may indicate that the Li-ionbattery charge is low and you cannotcontinue to drive.

Do not allow the vehicle to coast when theLi-ion battery is low or when the hybridsystem warning light blinks while driving.The engine will not automatically start tocharge the Li-ion battery while the vehicleis coasting.

Page 98: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Forward emergency brakingsystem warning light (if soequipped)This light illuminates when the forwardemergency braking system is set to OFF onthe lower display.

If the light illuminates when the forwardemergency braking system is ON, it mayindicate that the system is unavailable.See “Forward emergency braking system”

(P.5-89) for more details.

Low fuel warning lightThis light illuminates when the fuel in thetank is getting low. Refuel as soon as it isconvenient, preferably before the fuelgauge reaches the 0 (empty) position.

There will be a small reserve of fuelremaining in the tank when the fuel gaugereaches the 0 position.

Low tire pressure warninglightYour vehicle is equipped with a TirePressure Monitoring System (TPMS) thatmonitors the tire pressure of all tires.

The low tire pressure warning light warnsof low tire pressure and flat tire, or

indicates that the TPMS is not functioningproperly.

After the ignition switch is placed in the ONposition, this light illuminates for about 1second and turns off.

Low tire pressure warning:

If the vehicle is being driven with low tirepressure, the warning light will illuminate.The “Tire Pressure Low - Add Air” warningalso appears in the vehicle informationdisplay.

When the low tire pressure warning lightilluminates, you should stop and adjustthe tire pressure to the recommendedCOLD tire pressure shown on the Tire andLoading Information label. The low tirepressure warning light does not automati-cally turn off when the tire pressure isadjusted. After the tire is inflated to therecommended pressure, the vehicle mustbe driven at speeds above 16 MPH (25km/h) to activate the TPMS and turn off thelow tire pressure warning light. Use a tirepressure gauge to check the tire pressure.

The “Tire Pressure Low - Add Air” warningis active as long as the low tire pressurewarning light remains illuminated.

For additional information, see “Vehicle

information display” (P.2-21), “Tire Pres-sure Monitoring System (TPMS)” (P.5-4)and “Tire Pressure Monitoring System(TPMS)” (P.6-3).

Flat tire warning:

The flat tire warning warns of a flat tire.

If the vehicle is being driven with one ormore flat tires, the low tire pressurewarning light will illuminate continuouslyand a chime will sound for 10 seconds. A“Flat Tire - Visit dealer” warning alsoappears in the vehicle information display.

The chime will only sound at the firstindication of a flat tire and the warninglight will illuminate continuously. When theflat tire warning is activated, have thesystem reset and the tire checked, andreplaced if necessary, by an INFINITIretailer. Even if the tire is inflated to thespecified COLD tire pressure, the warninglight will continue to illuminate until thesystem is reset by an INFINITI retailer.

Your vehicle can be driven for a limitedtime on a flat tire. See “Run-flat tires” (P.6-4) and “Run-flat tires” (P.8-36).

TPMS malfunction:

If the TPMS is not functioning properly, thelow tire pressure warning light will flash for

Instruments and controls 2-15

Page 99: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-16 Instruments and controls

approximately 1 minute when the ignitionswitch is placed in the ON position. Thelight will remain on after the 1 minute.Have the system checked by an INFINITIretailer. The “Tire Pressure Low - Add Air”warning does not appear if the low tirepressure warning light illuminates to in-dicate a TPMS malfunction.

For additional information, see “Tire Pres-sure Monitoring System (TPMS)” (P.5-4).

WARNING

. Radio waves could adversely affectelectric medical equipment. Those whouse a pacemaker should contact theelectric medical equipment manufacturerfor the possible influences before use.

. If the light does not illuminate with theignition switch pushed ON, have thevehicle checked by an INFINITI retailer assoon as possible.

. If the light illuminates while driving,avoid sudden steering maneuvers orabrupt braking, reduce vehicle speed,pull off the road to a safe location andstop the vehicle as soon as possible.Driving with under-inflated tires may

permanently damage the tires and in-crease the likelihood of tire failure.Serious vehicle damage could occurand may lead to an accident and couldresult in serious personal injury. Checkthe tire pressure for all four tires. Adjustthe tire pressure to the recommendedCOLD tire pressure shown on the Tireand Loading Information label to turnthe low tire pressure warning light OFF. Ifthe light still illuminates while drivingafter adjusting the tire pressure, a tiremay be flat.

. Although you can continue driving with apunctured run-flat tire, remember thatvehicle handling stability is reduced,which could lead to an accident andpersonal injury. Also, driving a longdistance at high speeds may damagethe tires.

. Do not drive at speeds above 50 MPH(80 km/h) and do not drive more thanapproximately 93 miles (150 km) with apunctured run-flat tire. The actual dis-tance the vehicle can be driven on a flattire depends on outside temperature,vehicle load, road conditions and otherfactors.

. If you detect any unusual sounds orvibrations while driving with a puncturedrun-flat tire, pull off the road to a safelocation and stop the vehicle as soon aspossible. The tire may be seriouslydamaged and need to be replaced.

. When a wheel is replaced, the TPMS willnot function and the low tire pressurewarning light will flash for approxi-mately 1 minute. The light will remainon after the 1 minute. Contact yourINFINITI retailer as soon as possible fortire replacement and/or system reset-ting.

. Replacing tires with those not originallyspecified by INFINITI could affect theproper operation of the TPMS.

CAUTION

. The TPMS is not a substitute for theregular tire pressure check. Be sure tocheck the tire pressure regularly.

. If the vehicle is being driven at speeds ofless than 16 MPH (25 km/h), the TPMSmay not operate correctly.

Page 100: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Be sure to install the specified size oftires to the four wheels correctly.

Master warning lightWhen the ignition switch is in the ONposition, the master warning light illumi-nates if any of the following warningsappear in the vehicle information display:

. NO KEY warning

. PUSH warning

. Key ID Incorrect warning

. Low washer fluid warning

. Door/trunk open warning

. Loose Fuel Cap warning

. Tire Pressure Low - Add Air warning

. Flat Tire - Visit dealer warning

. All-Wheel Drive (AWD) warning (if soequipped)

. Headlight warning

. Adaptive Front lighting System (AFS)warning (if so equipped)

. Intelligent Key system warning

. Chassis control warningSee “Vehicle information display” (P.2-21).

If the driver assist system warnings appearin the vehicle information display, the

master warning light also illuminates. See“Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system”

(P.5-30), “Blind Spot Warning/Blind SpotInterventionTM/Back-up Collision Interven-tion systems” (P.5-37), “Distance ControlAssist (DCA) system” (P.5-79), “Forwardemergency braking system” (P.5-89) and“Predictive forward collision warning sys-tem” (P.5-94).

Power steering warning lightWhen the ignition switch is in the ONposition, the power steering warning lightilluminates. After starting the hybrid sys-tem, the power steering warning light turnsoff. This indicates that the direct adaptivesteering system is operational.

If the power steering warning light illumi-nates while the hybrid system is running, itmay indicate the direct adaptive steeringsystem is not functioning properly and mayneed servicing. Have the direct adaptivesteering system checked by an INFINITIretailer. (See “Power steering” (P.5-104).)

Seat belt warning light andchimeThe light and chime remind you to fastenseat belts. The light illuminates whenever

the ignition switch is pushed to the ONposition, and will remain illuminated untilthe driver’s seat belt is fastened. At thesame time, the chime will sound for about6 seconds unless the driver’s seat belt issecurely fastened.

The seat belt warning light for the frontpassenger will illuminate if the seat belt isnot fastened when the front passenger’sseat is occupied.

See “Seat belts” (P.1-10) for precautionson seat belt usage.

Supplemental air bag warninglightAfter pushing the ignition switch to the ONposition, the supplemental air bag warninglight will illuminate. The supplemental airbag warning light will turn off after about 7seconds if the supplemental front air bagand supplemental side air bag, curtainside-impact air bag systems and/or pre-tensioner seat belt are operational.

If any of the following conditions occur, thesupplemental front air bag, supplementalside air bag, supplemental curtain side-impact air bag and pretensioner seat beltneeds servicing and your vehicle must betaken to your nearest INFINITI retailer.

Instruments and controls 2-17

Page 101: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-18 Instruments and controls

. The supplemental air bag warning lightremains on after approximately 7 sec-onds.

. The supplemental air bag warning lightflashes intermittently.

. The supplemental air bag warning lightdoes not come on at all.

Unless checked and repaired, the Supple-mental Restraint Systems and/or the pre-tensioner seat belt may not functionproperly.

For additional information, see “Supple-mental restraint system” (P.1-37).

WARNING

If the supplemental air bag warning light ison, it could mean that the supplementalfront air bag, supplemental side air bag,curtain side-impact air bag systems and/orpretensioner seat belt will not operate in anaccident. To help avoid injury to yourself orothers, have your vehicle checked by aretailer as soon as possible.

Vehicle Dynamic Control (VDC)warning lightThe light will blink when the VehicleDynamic Control (VDC) system or thetraction control system is operating, thusalerting the driver that the vehicle isnearing its traction limits. The road surfacemay be slippery.

When the VDC warning light illuminateswhen the VDC system is turned on, thislight alerts the driver to the fact that theVDC system’s fail-safe mode is operating,for example the VDC, active trace control,rise-up and build-up function, brake forcedistribution or hill start assist system maynot be functioning properly. Have thesystem checked by an INFINITI retailer. Ifa malfunction occurs in the system, theVDC system function will be canceled butthe vehicle is still driveable. For additionalinformation, see “Vehicle Dynamic Control(VDC) system” (P.5-108).

INDICATOR LIGHTS

Approaching Vehicle Soundfor Pedestrians (VSP) OFF indicatorlightThis light comes on if there is a malfunc-tion in the Approaching Vehicle Sound forPedestrians (VSP) system. (See “Approach-ing Vehicle Sound for Pedestrians (VSP)system” (P.Hybrid System-8) for the VSPsystem.)

ECO drive indicator lightWhen the ignition switch is pushed to theON position, the light will come on andthen turn off.

When the INFINITI Drive Mode Selector isturned to the ECO mode, the ECO driveindicator light will illuminate, blink orremain off depending on the acceleratorpedal operation to help assist the driver todrive economically. For more details, see“ECO mode” (P.5-21).

EV indicator lightThis illuminates to indicate the vehicle isbeing driven powered only by the motor.

Page 102: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Exterior light indicatorThis indicator illuminates when the head-light switch is turned to the AUTO, or

position and the front parking lights,instrument panel lights, rear combinationlights, license plate lights or headlights areon. The indicator turns off when theselights are turned off.

Front fog light indicator lightThe front fog light indicator light illumi-nates when the front fog lights are on. (See“Fog light switch” (P.2-47).)

Front passenger air bag statuslightThe front passenger air bag status light( ) located on the instrument panel willbe lit and the passenger front air bag willbe OFF depending on how the frontpassenger seat is being used.

For front passenger air bag status lightoperation, see “INFINITI Advanced Air BagSystem (front seats)” (P.1-42).

High beam assist indicatorlight (if so equipped)The indicator light illuminates when theheadlights come on while the headlight

switch is in the AUTO position with thehigh beam selected. This indicates that thehigh beam assist system is operational.(See “High beam assist” (P.2-43).)

High beam indicator lightThis light comes on when the headlighthigh beam is on and goes out when the lowbeam is selected.

Malfunction Indicator Light(MIL)If the Malfunction Indicator Light (MIL)comes on steady or blinks while the engineis running, it may indicate a potentialemission control malfunction.

The malfunction indicator light may alsocome on steady if the fuel-filler cap is looseor missing, or if the vehicle runs out of fuel.Check to make sure the fuel-filler cap isinstalled and closed tightly, and that thevehicle has at least 3 US gallons (11.4liters) of fuel in the fuel tank.

After a few driving trips, the lightshould turn off if no other potentialemission control system malfunction ex-ists.

If this indicator light remains on for 20seconds and then blinks for 10 seconds

when the engine is not running, it indicatesthat the vehicle is not ready for anemission control system inspection/main-tenance test. (See “Readiness for Inspec-tion/Maintenance (I/M) test (US only)” (P.9-22).)

Operation:

The malfunction indicator light will comeon in one of two ways:

. Malfunction indicator light on steady —

An emission control system malfunc-tion has been detected. Check the fuel-filler cap if the Loose Fuel Cap warningappears in the vehicle information dis-play. If the fuel-filler cap is loose ormissing, tighten or install the cap andcontinue to drive the vehicle. Thelight should turn off after a few drivingtrips. If the light does not turn offafter a few driving trips, have thevehicle inspected by an INFINITI retai-ler. You do not need to have yourvehicle towed to the retailer.

. Malfunction indicator light blinking —

An engine misfire has been detectedwhich may damage the emission con-trol system.To reduce or avoid emission controlsystem damage:

Instruments and controls 2-19

Page 103: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-20 Instruments and controls

1) Do not drive at speeds above 45MPH (72 km/h).

2) Avoid hard acceleration or decelera-tion.

3) Avoid steep uphill grades.4) If possible, reduce the amount of

cargo being hauled or towed.The malfunction indicator light maystop blinking and remain on.Have the vehicle inspected by anINFINITI retailer. You do not need tohave your vehicle towed to the retailer.

CAUTION

Continued vehicle operation without havingthe emission control system checked andrepaired as necessary could lead to poordriveability, reduced fuel economy, andpossible damage to the emission controlsystem.

READY to drive indicator lightThe READY to drive indicator light illumi-nates when the hybrid system is poweredand the vehicle may be driven.

Security indicator lightThe light blinks when the ignition switch isin the ACC, OFF or LOCK position. Thisfunction indicates the security systemequipped on the vehicle is operational.

If the security system is malfunctioning,this light will remain on while the ignitionswitch is in the ON position. For additionalinformation, see “Security systems” (P.2-35).

Turn signal/hazard indicatorlightsThe light flashes when the turn signalswitch lever or hazard switch is turned on.

Vehicle Dynamic Control (VDC)off indicator lightThe light comes on when the VehicleDynamic Control (VDC) off switch is pushedto OFF. This indicates that the VDC systemand traction control system are not operat-ing.

AUDIBLE REMINDERS

Key reminder chimeA chime will sound if the driver side door isopened while the ignition switch is pushedto the ACC position. Make sure the ignitionswitch is pushed to the OFF position, andtake the Intelligent Key with you whenleaving the vehicle.

Light reminder chimeA chime will sound when the driver sidedoor is opened with the light switch in the

or position and the ignition switchin the ACC, OFF or LOCK position.

Turn the light switch off when you leave thevehicle.

Parking brake reminder chimeThe parking brake reminder chime willsound if the vehicle is driven at more than4 MPH (7 km/h) with the parking brakeapplied. Stop the vehicle and release theparking brake.

Brake pad wear warningThe disc brake pads have audible wearwarnings. When a brake pad requiresreplacement, it will make a high pitchedscraping sound when the vehicle is in

Page 104: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

motion. This scraping sound will first occuronly when the brake pedal is depressed.After more wear of the brake pad, thesound will always be heard even if thebrake pedal is not depressed. Have thebrakes checked as soon as possible if thewarning sound is heard.

JVI0641X

The vehicle information display *1 islocated between the tachometer and thespeedometer, and it displays the warningsand information. The following items arealso displayed if the vehicle is equippedwith them:

. Automatic Transmission (AT)— “Driving the vehicle” (P.5-14)

. All-Wheel Drive (AWD)— “Intelligent All-Wheel Drive (AWD)”

(P.5-101). Cruise control

— “Cruise control” (P.5-56)

. Intelligent Cruise Control (ICC)— “Intelligent Cruise Control (ICC) sys-

tem” (P.5-58). Active Lane Control

— “Active Lane Control” (P.5-24). Lane Departure Warning (LDW)/Lane

Departure Prevention (LDP) system— “Lane Departure Warning (LDW) sys-

tem/Lane Departure Prevention(LDP) system” (P.5-30)

. Blind Spot Warning (BSW)/Blind SpotInterventionTM (BSI)/Back-up CollisionIntervention (BCI) systems— “Blind Spot Warning/Blind Spot

InterventionTM/Back-up Collision In-tervention systems” (P.5-37)

. Distance Control Assist (DCA) system— “Distance Control Assist (DCA) sys-

tem” (P.5-79). Forward emergency braking system

— “Forward emergency braking sys-tem” (P.5-89)

. Predictive forward collision warningsystem— “Predictive forward collision warn-

ing system” (P.5-94). Active trace control

Instruments and controls 2-21

VEHICLE INFORMATION DISPLAY

Page 105: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-22 Instruments and controls

— “Active trace control” (P.5-110). Intelligent Key system

— “Intelligent Key system” (P.3-6)

Page 106: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0672X

Instruments and controls 2-23

Page 107: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-24 Instruments and controls

INDICATORS FOR OPERATION

1. Hybrid system start operationindicatorThis indicator appears when the shift leveris in the P (Park) position.

This indicator means that the INFINITIDirect Response Hybrid® System will startby pushing the ignition switch with thebrake pedal depressed. You can start thehybrid system directly in any position ofthe ignition switch.

2. NO KEY warningThe warning appears when the door isclosed with the Intelligent Key left outsidethe vehicle and the ignition switch in theACC or ON position. Make sure that theIntelligent Key is inside the vehicle.

See “Intelligent Key system” (P.3-6) formore details.

3. SHIFT “P” warningThis warning will appear in the followingconditions.

. When the shift lever is in any positionexcept P (Park) and the push buttonignition switch has been placed in theOFF position from the ON position.

. When the shift lever is operated whilethe READY to drive indicator light isflashing.

. The driver’s door is opened with theshift lever in “N”, “D” or “R”.

. When the vehicle cannot be drivenbecause the hybrid system temperaturehas become too high.

. When the engine stops due to suddendeceleration on a cold winter day.

. If a malfunction occurs in a situationother than those described above andthe engine cannot start automatically.

When this warning appears, place the shiftlever in the P (Park) position.

When the SHIFT “P” warning appears, abuzzer will sound.

This warning will turn off in the followingconditions.

. When the shift lever has been placed inthe P (Park) position.

. When the ignition switch has beenpushed to ON.

4. Shift to Park - Li-ion battery lowwarningThis warning appears when the shift leveris in the “N” position and level of remain-

ing charge in the Li-ion battery is low.

When this warning appears, place the shiftlever in the P (Park) position.

This will turn off in the following condi-tions.

. When the shift lever has been placed inthe P (Park) position.

5. Shift to Park - Press brake andstart warningThis warning appears after the hybridsystem was automatically turned off if thelevel of remaining charge in the Li-ionbattery is low.

When this warning appears, place the shiftlever in the P (Park) position and restartthe hybrid system.

6. “PUSH” warningThis warning appears when the shift leveris moved to the P (Park) position with theignition switch in the ACC position after theSHIFT “P” warning appears.

To push the ignition switch to the OFFposition, perform the following procedure:

. SHIFT “P” warning ? (Move the shiftlever to “P”) ? PUSH warning ? (Pushthe ignition switch ? ignition switch

Page 108: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

position is turned to ON) ? PUSHwarning ? (Push the ignition switch ?ignition switch position is turned toOFF)

7. Intelligent Key battery dischargeindicatorThis indicator appears when the IntelligentKey battery is running out of power.

If this indicator appears, replace thebattery with a new one. (See “IntelligentKey battery replacement” (P.8-25).)

8. Hybrid system start operation forIntelligent Key system indicatorThis indicator appears when the IntelligentKey battery is running out of power andwhen the Intelligent Key System andvehicle are not communicating normally.

If this indicator appears, touch the ignitionswitch with the Intelligent Key whiledepressing the brake pedal. (See “Intelli-gent Key battery discharge” (P.5-13).)

9. Key ID Incorrect warningThe warning appears when the ignitionswitch is pushed from the LOCK positionand the Intelligent Key cannot be recog-nized by the system. You cannot start the

hybrid system with an unregistered key.Use the registered Intelligent Key.

See “Intelligent Key” (P.3-2).

10. Parking brake release warningThis warning appears when the vehiclespeed is above 4 MPH (7 km/h) and theparking brake is applied.

11. Low fuel warningThis warning appears when the fuel level inthe tank is getting low. Refuel as soon as itis convenient, preferably before the fuelgauge reaches the empty (0) position.

There is a small reserve of fuel remainingin the tank when the fuel gauge reachesthe empty (0) position.

12. Low washer fluid warningThis warning appears when the washertank fluid is at a low level. Add washer fluidas necessary. (See “Window washer fluid”(P.8-16).)

13. Door/trunk open warningThis warning appears if any of the doorsand/or the trunk lid are open or not closedsecurely. The vehicle icon indicates whichdoor or the trunk lid is open on the display.

14. Intelligent Key system warningThis warning appears if there is a malfunc-tion in the Intelligent Key system.

If this warning appears while the hybridsystem is stopped, the hybrid systemcannot be started. If this warning appearswhile the hybrid system is running, thevehicle can be driven. However, contact anINFINITI retailer for repair as soon aspossible.

15. Loose Fuel Cap warningThis warning appears when the fuel-fillercap is not tightened correctly after thevehicle has been refueled. (See “Fuel-fillercap” (P.3-22).)

16. Tire Pressure Low - Add AirwarningThis warning appears when the low tirepressure warning light in the meter illumi-nates and low tire pressure is detected.The warning appears each time the ignitionswitch is placed in the ON position as longas the low tire pressure warning lightremains illuminated. If this warning ap-pears, stop the vehicle and adjust thepressure to the recommended COLD tirepressure shown on the Tire and Loading

Instruments and controls 2-25

Page 109: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-26 Instruments and controls

Information label. (See “Low tire pressurewarning light” (P.2-15) and “Tire PressureMonitoring System (TPMS)” (P.5-4).)

17. Flat Tire - Visit dealer warningThis warning appears when the low tirepressure warning light in the meter illumi-nates and one or more flat tires aredetected while driving. A chime alsosounds for approximately 10 seconds.(See “Low tire pressure warning light”(P.2-15) and “Tire Pressure MonitoringSystem (TPMS)” (P.5-4).)

18. Low oil pressure warningThis warning appears if low engine oilpressure is detected. If the warningappears during normal driving, pull offthe road in a safe area, stop the engineimmediately and call an INFINITI retailer orother authorized repair shop.

The low oil pressure warning is notdesigned to indicate a low oil level. Usethe dipstick to check the oil level. (See“Engine oil” (P.8-12).)

19. High temperature warningThis warning appears when the enginecoolant temperature is extremely high.

CAUTION

If the high temperature warning appearswhen the ignition switch is in the ONposition, stop the vehicle safely as soonas possible.

If the vehicle is overheated, continuingvehicle operation may seriously damagethe engine. (See “If your vehicle overheats”(P.6-7) for the immediate action required.)

20. Hybrid system overheat warn-ingThis warning appears when the tempera-ture of the hybrid system is extremely high.Stop the vehicle in a safe location as soonas possible. Avoid quick starting or abruptacceleration. When the warning turns off,the vehicle can be driven.

If the warning appears again soon after itturns off, have the vehicle checked by anINFINITI retailer.

WARNING

Do not hold the vehicle in a stoppedposition on an uphill grade by depressingthe accelerator or by slowly creeping for-ward. This may cause damage to thetransmission or the vehicle may enter trafficcausing serious injury or death. Always usethe brake pedal when stopping on an uphillgrade.

CAUTION

. If you continue to drive the vehicle whilethe warning is displayed, the vehiclemay become undriveable. If this occurs,place the shift lever in the “P” positionand wait for a short period of time withthe vehicle stopped until the displaygoes out. In this case, the warning willbe displayed alternately with the SHIFT“P” warning. (See “3. SHIFT “P” warn-ing” (P.2-24).)

. Do not drive the vehicle with the warningon. Doing so could cause a hybridsystem malfunction.

Page 110: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

21. All-Wheel Drive (AWD) warning(if so equipped)This warning appears when the IntelligentAll-Wheel Drive (AWD) system is notfunctioning properly while the hybridsystem is running. (See “Intelligent All-Wheel Drive (AWD)” (P.5-101).)

22. Extended storage fuse warningThis warning may appear if the extendedstorage fuse switch is not pushed in(switched on). When this warning appears,push in (switch on) the extended storagefuse switch to turn off the warning. Formore information, see “Extended storagefuse switch” (P.8-24).

23. Headlight warningThis warning appears if the LED headlightsare malfunctioning. Have the systemchecked by an INFINITI retailer.

24. Adaptive Front lighting System(AFS) warning (if so equipped)This warning appears when the AdaptiveFront lighting System (AFS) is not function-ing properly. Have the system checked byan INFINITI retailer.

(See “Adaptive Front lighting System (AFS)”

(P.2-45).)

25. Power will turn off to save thebattery warningThis warning appears after a period of timeif the shift lever has not moved from the“P” (Park) position with the ignition switchin the ACC or ON position.

26. Power turned off to save thebattery warningThis warning appears after the ignitionswitch is automatically turned OFF to savethe 12-volt battery.

27. Light reminder warningThis warning appears when the driver sidedoor is opened with the headlight switchleft ON and the ignition switch in the ACC,OFF or LOCK position. Place the headlightswitch to “OFF” or “AUTO” position. Foradditional information, see “Headlight andturn signal switch” (P.2-41).

28. “TIMER” indicatorThis indicator appears when the set“TIMER” indicator activates. You can setthe time for up to 6 hours. (See the InfinitiInTouch Owner’s Manual.)

29. Low outside temperature warn-ingThis warning appears if the outside tem-perature is below 378F (38C). The warningcan be set not to be displayed. (See theInfiniti InTouch Owner’s Manual.)

30. Chassis control warningThis warning appears if Active Lane Control(if so equipped), the active trace controlsystem and/or chassis control are notfunctioning properly. Have the systemchecked by an INFINITI retailer. (See “ActiveLane Control” (P.5-24), “Active trace con-trol” (P.5-110) and “Chassis control” (P.5-112).)

31. Cruise indicatorModels without Intelligent Cruise Control(ICC) system:

This indicator shows the cruise controlsystem status. The status is shown by thecolor.

See “Cruise control” (P.5-56) for details.

Models with Intelligent Cruise Control(ICC) system:

This indicator shows the conventional(fixed speed) cruise control mode status.

Instruments and controls 2-27

Page 111: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-28 Instruments and controls

The status is shown by the color.

See “Conventional (fixed speed) cruisecontrol mode” (P.5-74) for details.

32. Intelligent Cruise Control (ICC)system ON indicator (if soequipped)This indicator shows the Intelligent CruiseControl (ICC) system status. The status isshown by the color. (See “Intelligent CruiseControl (ICC) system” (P.5-58).)

33. Driver assist system indicator(if so equipped)This indicator shows the status of thefollowing systems.

. Lane Departure Warning (LDW)

. Lane Departure Prevention (LDP)

. Blind Spot Warning (BSW)

. Blind Spot InterventionTM (BSI)

. Distance Control Assist (DCA)

. Forward emergency braking

. Predictive forward collision warningFor more details, see “Lane DepartureWarning (LDW) system/Lane DeparturePrevention (LDP) system” (P.5-30), “BlindSpot Warning (BSW) system/Blind SpotInterventionTM (BSI) system” (P.5-37), “Dis-

tance Control Assist (DCA) system” (P.5-79), “Forward emergency braking system”

(P.5-89) and “Predictive forward collisionwarning system” (P.5-94).

The figure and color of this indicator willchange depending on the conditions of theabove systems. (In each section, the nameof this indicator is referred to as, “driverassist system lane indicator”, “driverassist system blind spot indicator” or“driver assist system forward indicator”depending on the systems.)

34. INFINITI Drive Mode SelectorindicatorWhen a driving mode is selected using theINFINITI Drive Mode Selector, the selectedmode indicator is displayed.

. PERSONAL

. SPORT

. STANDARD

. ECO

. SNOW(See “INFINITI Drive Mode Selector” (P.5-21).)

35. Automatic Transmission (AT)position indicatorThis indicator shows the automatic shiftposition.

In the manual shift mode, when thetransmission does not shift to the selectedgear due to a transmission protectionmode, the AT position indicator will blinkand a chime will sound.

See “Automatic transmission” (P.5-14) forfurther details.

Page 112: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0681M

INDICATORS FOR MAINTENANCEFor setting the indicators for maintenance,see the Infiniti InTouch Owner’s Manual.

1. Engine oil and filter replacementindicatorThis indicator appears when the customerset time comes for changing the engine oiland filter. You can set or reset the distancefor changing the engine oil and filter.

2. Tire replacement indicatorThis indicator appears when the customerset distance comes for replacing tires. Youcan set or reset the distance for replacingtires.

WARNING

The tire replacement indicator is not asubstitute for regular tire checks, includingtire pressure checks. See “Changing wheelsand tires” (P.8-38). Many factors includingtire inflation, alignment, driving habits androad conditions affect tire wear and whentires should be replaced. Setting the tirereplacement indicator for a certain drivingdistance does not mean your tires will lastthat long. Use the tire replacement indicatoras a guide only and always perform regulartire checks. Failure to perform regular tirechecks, including tire pressure checks couldresult in tire failure. Serious vehicle damage

could occur and may lead to a collision,which could result in serious personal injuryor death.

3. Other indicatorThis indicator appears when the customerset time comes for replacing items otherthan the engine oil, oil filter and tires. Youcan set or reset the distance for replacingthe items.

Instruments and controls 2-29

Page 113: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-30 Instruments and controls

JVI0704M

Page 114: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0642X

TRIP COMPUTERSwitches for the trip computer are locatedon the right side of the steering wheel. Tooperate the trip computer, push theswitches as shown above.

Each time the or switch is pushed,the display will change.

The display items for trip computer arechanged on the lower display. For details,see the Infiniti InTouch Owner’s Manual.

JVO0108X

1. Energy monitorThe energy monitor related to the hybridsystem is shown by the graphic.

*A : Engine

*B : Li-ion battery

*B shows the charge level of the Li-ionbattery.

The charge level display will continuouslychange as the Li-ion battery charge levelincrease or decreases during normal vehi-cle operation. Movement of the displayfrom the far right to the far left of the bar isnormal.

The energy flow is also displayed in thelower display. (See “Energy Flow” (P.HybridSystem-5).)

2. EV mode odometer and twin tripodometer (mile or km)EV mode odometer:

This indicates the total distance traveledusing the electric motor only.

EV mode twin trip odometer:

This indicates the distance traveled in anindividual trip using the electric motoronly.

Two types of individual trip can berecorded, TRIP A and TRIP B.

Pushing the TRIP RESET switch will togglebetween TRIP A and TRIP B.

To reset the display to 0, hold down theTRIP RESET switch for more than approxi-mately 1 second.

3. Acceleration guideThis display provides the driver a visualdisplay of how efficiently the vehicle isbeing driven based on accelerator pedalposition. When the drive mode is set toECO using the lower display, the accelera-tion guide operates with the ECO drive

Instruments and controls 2-31

Page 115: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-32 Instruments and controls

indicator (see “ECO drive indicator light”(P.2-18)) and ECO pedal (if so equipped) tohelp you improve fuel economy. (See“INFINITI Drive Mode Selector” (P.5-21)and “ECO pedal system” (P.5-22).)

JVI0711X

*A : Accelerator pedal position indicator

*B : Power range

*C : Economy range

JVI0712X

The above examples of the accelerationguide indicate the following conditions.

1. The vehicle is being driven economic-ally when the vehicle is driven with theaccelerator pedal position in the econ-omy range.

2. The vehicle is being driven less eco-nomically when the vehicle is drivenwith the accelerator pedal position inthe power range.

This will not be displayed when IntelligentCruise Control (ICC) system (if so equipped)or cruse control system (if so equipped) isoperating.

Page 116: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

4. Current fuel consumption andaverage fuel consumption (MPG, l(liter)/100 km or km/l)Current fuel consumption:

The current fuel consumption mode showsthe current fuel consumption.

Average fuel consumption:

The average fuel consumption mode showsthe average fuel consumption since thelast reset. Resetting is done by pushing the

or switch for longer than 1second.

The average fuel consumption is also reseton the lower display. See the InfinitiInTouch Owner’s Manual.

The display is updated every 30 seconds.At about the first 1/3 mile (500 m) after areset, the display shows “——”.

5. Average speed (MPH or km/h)The average speed mode shows theaverage vehicle speed since the last reset.Resetting is done by pushing the or

switch for longer than 1 second.

The display is updated every 30 seconds.The first 30 seconds after a reset, thedisplay shows “——”.

6. Elapsed time and trip odometer(mile or km)Elapsed time:

The elapsed time mode shows the timesince the last reset. Resetting is done bypushing the or switch for longerthan 1 second. (The trip odometer is alsoreset at the same time.)

Trip odometer:

The trip odometer mode shows the totaldistance the vehicle has been driven sincethe last reset. Resetting is done by pushingthe or switch for longer than 1second. (The elapsed time is also reset atthe same time.)

7. Distance to empty (dte — mile orkm)The distance to empty (dte) mode providesyou with an estimation of the distance thatcan be driven before refueling. The dte isconstantly being calculated, based on theamount of fuel in the fuel tank and theactual fuel consumption.

The display is updated every 30 seconds.

The dte mode includes a low range warningfeature. If the fuel level is low, the warningis displayed on the screen.

When the fuel level drops even lower, thedte display will change to “——”.

. If the amount of fuel added is small, thedisplay just before the ignition switchis pushed to the OFF position maycontinue to be displayed.

. When driving uphill or rounding curves,the fuel in the tank shifts, which maymomentarily change the display.

8. Engine coolant temperaturegaugeThis gauge indicates the temperature ofthe engine coolant. If the engine coolant isoverheated, the color of gauge will changeto the red.

The engine coolant temperature varies withthe outside air temperature and drivingconditions.

CAUTION

If the engine is overheated, continuedoperation of the vehicle may seriouslydamage the engine. See “If your vehicleoverheats” (P.6-7) for immediate actionrequired.

Instruments and controls 2-33

Page 117: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-34 Instruments and controls

9. Navigation (if so equipped)When the route guidance is set in thenavigation system, this item shows thenavigation route information.

For more details, see the Infiniti InTouchOwner’s Manual.

10. AudioThe audio mode shows the status of audioinformation.

For more details, see the Infiniti InTouchOwner’s Manual.

11. Driving aids (if so equipped)The driving aids mode shows the operatingcondition for the following systems.

. Lane Departure Warning (LDW)

. Lane Departure Prevention (LDP)

. Blind Spot Warning (BSW)

. Blind Spot InterventionTM (BSI)

. Distance Control Assist (DCA)

. Forward emergency braking

. Predictive forward collision warningFor more details, see “Lane DepartureWarning (LDW) system/Lane DeparturePrevention (LDP) system” (P.5-30), “BlindSpot Warning (BSW) system/Blind SpotInterventionTM (BSI) system” (P.5-37), “Dis-

tance Control Assist (DCA) system” (P.5-79), “Forward emergency braking system”

(P.5-89) and “Predictive forward collisionwarning system” (P.5-94).

12. Tire pressureThe tire pressure mode shows the pressureof all four tires while the vehicle is driven.See the Infiniti InTouch Owner’s Manual forthe display settings.

When the “Tire Pressure Low - Add Air” or“Flat Tire - Visit dealer” warning appears,the display can be switched to the tirepressure mode by pushing the orswitch.

13. Chassis controlWhen Active Lane Control (if so equipped)or the active trace control system isoperated, it shows the operating condition.See “Active Lane Control” (P.5-24) and“Active trace control” (P.5-110) for moredetails.

14. Warning checkThe present warnings are displayed. If nowarning is present, “No Warning” is dis-played.

JVI0679M

CLOCK AND OUTSIDE AIR TEM-PERATUREThe clock *1 and outside air temperature*2 are displayed on the upper side of thevehicle information display.

ClockThe clock can be adjusted on the lowerdisplay. See the Infiniti InTouch Owner’sManual.

Outside air temperature (8F or 8C)The outside air temperature is displayed in8F or 8C in the range of −22 to 1318F (−30to 558C).

Page 118: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The outside temperature sensor is locatedin front of the radiator. The sensor may beaffected by road or engine heat, winddirections and other driving conditions.The display may differ from the actualoutside temperature or the temperaturedisplayed on various signs or billboards.

SIC2132

Your vehicle has two types of securitysystems, as follows:

. Vehicle security system

. INFINITI Vehicle Immobilizer SystemThe security condition will be shown by thesecurity indicator light.

VEHICLE SECURITY SYSTEMThe vehicle security system provides visualand audio alarm signals if someone opensthe doors, hood, or trunk lid when thesystem is armed. It is not, however, amotion detection type system that acti-vates when a vehicle is moved or when avibration occurs.

The system helps deter vehicle theft butcannot prevent it, nor can it prevent thetheft of interior or exterior vehicle compo-nents in all situations. Always secure yourvehicle even if parking for a brief period.Never leave your Intelligent Key(s) in thevehicle, and always lock it when unat-tended. Be aware of your surroundings,and park in secure, well-lit areas wheneverpossible.

Many devices offering additional protec-tion, such as component locks, identifica-tion markers, and tracking systems, areavailable at auto supply stores and speci-alty shops. Your INFINITI retailer may alsooffer such equipment. Check with yourinsurance company to see if you may beeligible for discounts for various theftprotection features.

Instruments and controls 2-35

SECURITY SYSTEMS

Page 119: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-36 Instruments and controls

SIC2045

How to arm the vehicle securitysystem1. Close all windows.

The system can be armed even if thewindows are open.

2. Push the ignition switch to the OFFposition.

3. Remove the Intelligent Key from thevehicle.

4. Close all doors, hood and trunk. Lockall doors. The doors can be locked withthe Intelligent Key, door handle requestswitch, power door lock switch ormechanical key.

5. Confirm that the security indicator lightcomes on. The security indicator lightstays on for about 30 seconds. Thevehicle security system is now pre-armed. After about 30 seconds thevehicle security system automaticallyshifts into the armed phase. Thesecurity light begins to flash once everyapproximately 3 seconds. If, during this30-second pre-arm time period, thedoor is unlocked, or the ignition switchis pushed to ACC or ON, the system willnot arm.

Even when the driver and/or passengersare in the vehicle, the system will activatewith all doors, hood, and trunk lid lockedwith the ignition switch in the LOCKposition.When pushing the ignition switchto the ACC or ON position, the system willbe released.

Vehicle security system activationThe vehicle security system will give thefollowing alarm:

. The headlights blink and the hornsounds intermittently.

. The alarm automatically turns off afterapproximately 1 minute. However, thealarm reactivates if the vehicle is

tampered with again.The alarm is activated by:

. Unlocking the door or opening the trunklid without using the button on theIntelligent Key, the door handle requestswitch, one touch unlock sensor or themechanical key. (Even if the door isopened by releasing the door insidelock knob, the alarm will activate.)

. Opening the hood.

How to stop an activated alarmThe alarm will stop by unlocking a door bypushing the UNLOCK button on the Intelli-gent Key, pushing the door handle requestswitch, touching the one touch unlocksensor or using the mechanical key. Thealarm will not stop if the ignition switch ispushed to the ACC or ON position.

If the system does not operate as de-scribed above, have it checked by anINFINITI retailer.

Page 120: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

INFINITI VEHICLE IMMOBILIZERSYSTEMThe INFINITI Vehicle Immobilizer Systemwill not allow the INFINITI Direct ResponseHybrid® System to start without the use ofthe registered Intelligent Key. Never leavethese keys in the vehicle.

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interfer-ence received, including interference thatmay cause undesired operation.

NOTE:

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with RSS-210 ofIndustry Canada. Operation is subject tothe following two conditions: (1) thisdevice may not cause interference, and(2) this device must accept any interfer-

ence, including interference that maycause undesired operation of the device.

SIC2045

Security indicator lightThe security indicator light is located onthe meter panel. It indicates the status ofthe INFINITI Vehicle Immobilizer System.

The light blinks after the ignition switchwas in the LOCK, ACC or OFF position. Thisfunction indicates the security systemsequipped on the vehicle are operational.

If the INFINITI Vehicle Immobilizer Systemis malfunctioning, this light will remain onwhile the ignition switch is in the ONposition.

Instruments and controls 2-37

Page 121: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-38 Instruments and controls

If the light still remains on and/or thehybrid system will not start, see anINFINITI retailer for INFINITI Vehicle Immo-bilizer System service as soon as possible.Please bring all Intelligent Keys that youhave when visiting an INFINITI retailer forservice.

WARNING

In freezing temperatures the washer solu-tion may freeze on the windshield andobscure your vision which may lead to anaccident. Warm windshield with the defros-ter before you wash the windshield.

CAUTION

. Do not operate the washer continuouslyfor more than 30 seconds.

. Do not operate the washer if thereservoir tank is empty.

. Do not fill the window washer reservoirtank with washer fluid concentrates atfull strength. Some methyl alcoholbased washer fluid concentrates maypermanently stain the grille if spilledwhile filling the window washer reser-voir tank.

. Pre-mix washer fluid concentrates withwater to the manufacturer’s recom-mended levels before pouring the fluidinto the window washer reservoir tank.Do not use the window washer reservoir

tank to mix the washer fluid concentrateand water.

WINDSHIELD WIPER AND WASHER SWITCH

Page 122: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0737X

Type A

JVI0738X

Type B

The windshield wiper and washer operateswhen the ignition switch is in the ONposition.

Push the lever down to operate the wiperat the following speed:

*1 INT (Type A) — intermittent operationcan be adjusted by turning the knobtoward *A (Slower) or *B (Faster).When the speed sensing wiper inter-val function is turned on, the inter-mittent operation speed varies inaccordance with the vehicle speed.(For example, when the vehicle speedis high, the intermittent operationspeed will be faster.) To turn thisfunction on and off, see the InfinitiInTouch Owner’s Manual.

*1 AUTO (Type B) — For models with therain-sensing auto wiper system, see“Rain-sensing auto wiper system”

(P.2-40).

*2 LO — continuous low speed operation

*3 HI — continuous high speed operation

*4 MIST — one sweep operation of thewiper

Pull the lever toward you*5 to operate thewasher. Then the wiper will also operateseveral times.

Pulling up the wiper arm:

The wiper arm should be in the up positionwhen replacing the wiper.

To pull up the wiper arm, push up*4 twicewhen the ignition switch is in the OFFposition within 1 minute. The wiper opera-tion stops in mid-operation and the wiperarm can be pulled up.

The shift lever should be in the P (Park)position.

To return the wiper arm, place the wiperarm in the down position and operate thewiper switch once.

CAUTION

Do not operate the windshield wiper whilethe wiper arm is pulled up. The wiper armmay be damaged.

Wiper drip wipe system:

The wiper will also operate once about 3seconds after the washer and wiper areoperated. This operation is to wipe washerfluid that has dripped on the windshield.

Instruments and controls 2-39

Page 123: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-40 Instruments and controls

JVI0739X

RAIN-SENSING AUTO WIPER SYS-TEM (if so equipped)The rain-sensing auto wiper system canautomatically turn on the wipers andadjust the wiper speed depending on therainfall and the vehicle speed by using therain sensor located on the upper part ofthe windshield.

To set the rain-sensing auto wiper system,push the lever down to the AUTO position*1 . The wiper will sweep once while theignition switch is in the ON position.

The rain sensor sensitivity level can beadjusted by turning the knob toward *2

(High) or toward *3 (Low).

. High — High sensitive operation

. Low — Low sensitive operationTo turn the rain-sensing auto wiper systemoff, push up the lever to the OFF position,or pull down the lever to the LO or HIposition.

CAUTION

Do not touch the rain sensor and around itwhen the wiper switch is in the AUTOposition and the ignition switch is in theON position. The wipers may operate un-expectedly and cause to an injury or a wiperdamage.

. The rain-sensing auto wipers are in-tended for use during rain. If the switchis left in the AUTO position, the wipersmay operate unexpectedly when dirt,fingerprints, oil film or insects arestuck on or around the sensor. Thewipers may also operate when exhaustgas or moisture affect the rain sensor.

. The rain-sensing auto wipers may notoperate if rain does not hit the rainsensor even if it is raining.

. When the windshield glass is coatedwith water repellent, the speed of therain-sensing auto wipers may be high-er even though the amount of therainfall is small.

. Be sure to turn off the rain-sensingauto wiper system when you use a carwash.

. Using genuine wiper blades is recom-mended for proper operation of therain-sensing auto wiper system. (See“Windshield wiper blades” (P.8-21) forwiper blade replacement.)

Page 124: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0643X

To defog/defrost the rear window glassand outside mirrors, start the INFINITIDirect Response Hybrid® System and pushthe switch *1 on. The indicator light *2will come on. Push the switch again to turnthe defroster off.

It will automatically turn off in approxi-mately 15 minutes.

CAUTION

When cleaning the inner side of the rearwindow, be careful not to scratch or damagethe rear window defroster.

SIC3267

HEADLIGHT SWITCH

Lighting*1 Turn the switch to the position:

The front parking, side marker, tailand license plate lights will come on.

*2 Turn the switch to the position:Headlights will come on and all theother lights remain on.

SIC3268

Autolight systemThe autolight system allows the headlightsto be set so they turn on and offautomatically.

To set the autolight system:

1. Make sure the headlight switch is in theAUTO position *1 .

2. Push the ignition switch to the ONposition.

3. The autolight system automaticallyturns the headlights on and off.

To turn the autolight system off, turn theswitch to the OFF, or position.

Instruments and controls 2-41

REAR WINDOW AND OUTSIDE MIRRORDEFROSTER SWITCH HEADLIGHT AND TURN SIGNAL SWITCH

Page 125: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-42 Instruments and controls

The autolight system can turn on theheadlights automatically when it is darkand turn off the headlights when it is light.

The headlights will turn on automatically attwilight or in rainy weather (when thewindshield wiper is operated continu-ously).

If the ignition switch is pushed to the OFFposition and one of the doors is openedand this condition is continued, the head-lights remain on for 5 minutes.

Automatic headlights off delay:

You can keep the headlights on for up to180 seconds after you push the ignitionswitch to OFF and open any door then closeall the doors.

You can adjust the period of the automaticheadlights off delay from 0 seconds (OFF)to 180 seconds. The factory default settingis 45 seconds.

For automatic headlights off delay setting,see the Infiniti InTouch Owner’s Manual.

SIC3784

Be sure not to put anything on top of thephoto sensor *1 located on the top of theinstrument panel. The photo sensor con-trols the autolight; if it is covered, thephoto sensor reacts as if it is dark and theheadlights will illuminate.

SIC3269

Headlight beam select*1 To select the low beam, put the lever

in the neutral position as shown.

*2 To select the high beam, push thelever forward while the switch is in the

position. Pull it back to select thelow beam.

*3 Pulling the lever toward you will flashthe headlight high beam even whenthe headlight switch is in the OFFposition.

Page 126: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

High beam assist (if so equipped)The high beam assist system will operatewhen the vehicle is driven at speeds ofapproximately 22 MPH (35 km/h) andabove. If an oncoming vehicle or leadingvehicle appears in front of your vehiclewhen the headlight high beam is on, theheadlight will be switched to the low beamautomatically.

Precautions on high beam assist:

WARNING

. The high beam assist system is aconvenience but it is not a substitutefor safe driving operation. The drivershould remain alert at all times, ensuresafe driving practices and switch thehigh beams and low beam manuallywhen necessary.

. The high beam or low beam may notswitch automatically under the followingconditions. Switch the high beam andlow beam manually.

— During bad weather (rain, fog, snow,wind, etc.).

— When a light source similar to a

headlight or tail light is in thevicinity of the vehicle.

— When the headlights of the oncom-ing vehicle or the leading vehicle areturned off, when the color of the lightis affected due to foreign materialson the lights, or when the light beamis out of position.

— When there is a sudden, continuouschange in brightness.

— When driving on a road that passesover rolling hills, or a road that haslevel differences.

— When driving on a road with manycurves.

— When a sign or mirror-like surface isreflecting intense light towards thefront of the vehicle.

— When the container, etc. beingtowed by a leading vehicle is reflect-ing intense light.

— When a headlight on your vehicle isdamaged or dirty.

— When the vehicle is leaning at anangle due to a punctured tire, beingtowed, etc.

. The timing of switching the low beamand high beam may change under thefollowing situations.

— The brightness of the headlights ofthe oncoming vehicle or leadingvehicle.

— The movement and direction of theoncoming vehicle and the leadingvehicle.

— When only one light on the oncom-ing vehicle or the leading vehicle isilluminated.

— When the oncoming vehicle or theleading vehicle is a two-wheeledvehicle.

— Road conditions (incline, curve, theroad surface, etc.).

— The number of passengers and theamount of luggage.

Instruments and controls 2-43

Page 127: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-44 Instruments and controls

JVI0686X

High beam assist operations:

To activate the high beam assist system,turn the headlight switch to the AUTOposition *1 and push the lever forward *2(high beam position). The high beam assistindicator light in the meter will illuminatewhile the headlights are turned on.

If the high beam assist indicator light doesnot illuminate in the above condition, itmay indicate that the system is notfunctioning properly. Have the systemchecked by an INFINITI retailer.

When the vehicle speed lowers to less thanapproximately 17 MPH (27 km/h), theheadlight remains the low beam.

To turn off the high beam assist system,turn the headlight switch to theposition or select the low beam positionby placing the lever in the neutral position.

JVI0670X

Ambient image sensor maintenance:

The ambient image sensor *1 for the highbeam assist system is located in front ofthe inside mirror. To keep the properoperation of the high beam assist systemand prevent a system malfunction, be sureto observe the following:

. Always keep the windshield clean.

. Do not attach a sticker (includingtransparent material) or install anaccessory near the ambient imagesensor.

. Do not strike or damage the areasaround the ambient image sensor. Donot touch the sensor lens that is

Page 128: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

located on the ambient image sensor.If the ambient image sensor is damageddue to an accident, contact an INFINITIretailer.

Battery saver systemA chime will sound and the light reminderwarning will appear in the vehicle informa-tion display when the driver side door isopened with the light switch in the or

position and the ignition switch in theACC, OFF or LOCK position.

When the headlight switch is in the orposition while the ignition switch is in

the ON position, the lights will automati-cally turn off after a period of time whenthe ignition switch has been pushed to theOFF position.

When the headlight switch remains in theor position after the lights

automatically turn off, the lights will turnon when the ignition switch is pushed tothe ON position.

CAUTION

. When you turn on the headlight switchagain after the lights automatically turn

off, the lights will not turn off auto-matically. Be sure to turn the lightswitch to the OFF position when youleave the vehicle for extended periods oftime, otherwise the 12-volt battery willbe discharged.

. Never leave the light switch on when theINFINITI Direct Response Hybrid® Systemis not running for a period of time even ifthe headlights turn off automatically.

Daytime running light systemThe daytime running lights automaticallyilluminate when the hybrid system isstarted with the parking brake released.The daytime running lights operate withthe headlight switch in the OFF, AUTO or

position. Turn the headlight switch tothe position for full illumination whendriving at night.

If the parking brake is applied before thehybrid system is started, the daytimerunning lights do not illuminate. The day-time running lights illuminate once theparking brake is released. The daytimerunning lights will remain on until theignition switch is pushed to the OFFposition.

WARNING

When the daytime running light system isactive, tail lights on your vehicle are not on.It is necessary at dusk to turn on yourheadlights. Failure to do so could cause anaccident injuring yourself and others.

Adaptive Front lighting System(AFS) (if so equipped)The Adaptive Front lighting System (AFS)will automatically adjust the headlights(low beam) toward the turning direction toimprove the driver’s view. When the head-light switch is ON and the driver operatesthe steering wheel in a turn, the AFSsystem will be activated.

The AFS will operate:

. when the headlight switch is ON.

. when the shift lever is in any positionother than P (Park) or R (Reverse).

. when the vehicle is driven at above 3MPH (5 km/h) for the left-side head-light. Note that the right-side low beamheadlight will swivel but the left-sideheadlight will not swivel when thevehicle is below 3 MPH (5 km/h) and

Instruments and controls 2-45

Page 129: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-46 Instruments and controls

the steering wheel is turned.AFS will also adjust the headlight to aproper axis automatically, depending onthe number of occupants in the vehicle, theload the vehicle is carrying and the roadconditions.

If the AFS warning appears in the vehicleinformation display after the ignitionswitch has been pushed to the ON posi-tion, this may indicate that the AFS is notfunctioning properly. Have the systemchecked by an INFINITI retailer. When thehybrid system is started, the headlightswill vibrate to check the system condition.This is not a malfunction.

JVI0644X

JVI0661M

Instrument brightness controlThe instrument brightness control switchcan be operated when the ignition switchis in the ON position. When the switch isoperated, the vehicle information displayswitches to the brightness adjustmentmode.

Push the + side of the switch *A tobrighten the instrument panel lights. Thebar *1 moves to the + side.

Push the - side of the switch*B to dim theinstrument panel lights. The bar *1 movesto the − side. When the brightness levelreaches the minimum, the instrumentpanel lights will turn off during the night-time.

When the brightness level reaches themaximum or minimum, a beep will sound.

The vehicle information display returns tothe normal display under the followingconditions:

. when the instrument brightness controlswitch is not operated for more than 5seconds.

. when the or switch on the rightside of the steering switch is pushed.

Page 130: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIC3271

TURN SIGNAL SWITCH

*1 Turn signalMove the lever up or down to signal theturning direction. When the turn is com-pleted, the turn signals cancel automati-cally.

*2 Lane change signalTo indicate a lane change, move the leverup or down to the point where lights beginflashing.

If the lever is moved back right aftermoving up or down, the light will flash 3times.

SIC3272

FOG LIGHT SWITCHTo turn the fog lights on, turn the headlightswitch to the position, then turn theswitch to the position. To turn themoff, turn the switch to the OFF position.

The headlights must be on for the foglights to operate.

JVI0645X

To sound the horn, push the center padarea of the steering wheel.

WARNING

Do not disassemble the horn. Doing socould affect proper operation of the supple-mental front air bag system. Tampering withthe supplemental front air bag system mayresult in serious personal injury.

Instruments and controls 2-47

HORN

Page 131: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-48 Instruments and controls

SIC4336

The vehicle should be driven with theVehicle Dynamic Control (VDC) system onfor most driving conditions.

If the vehicle is stuck in mud or snow, theVDC system reduces the output of theINFINITI Direct Response Hybrid® Systemto reduce wheel spin. The speed of hybridsystem will be reduced even if the accel-erator is depressed to the floor. If max-imum power of the hybrid system isneeded to free a stuck vehicle, turn theVDC system off.

To turn off the VDC system, push the VDCOFF switch. The indicator light willilluminate.

Push the VDC OFF switch again or restartthe hybrid system to turn on the system.(See “Vehicle Dynamic Control (VDC) sys-tem” (P.5-108).)

JVI0716X

The power outlets are located in the centerconsole.

CAUTION

. The outlet and plug may be hot during orimmediately after use.

. Do not use with accessories that exceeda 12 volt, 120W (10A) power draw. Donot use double adapters or more thanone electrical accessory.

. Use power outlet with the INFINITI DirectResponse Hybrid® System running toavoid discharging the vehicle 12-volt

VEHICLE DYNAMIC CONTROL (VDC) OFFSWITCH POWER OUTLET

Page 132: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

battery.

. Avoid using power outlet when the airconditioner, headlights or rear windowdefroster is on.

. This power outlet is not designed for usewith a cigarette lighter unit.

. Push the plug in as far as it will go. Ifgood contact is not made, the plug mayoverheat or the internal temperaturefuse may blow.

. Before inserting or disconnecting a plug,be sure the electrical accessory beingused is turned OFF.

. When not in use, be sure to close thecap. Do not allow water or any liquid tocontact the outlet.

SIC2570

REARTo open the ashtray lid, pull *1 .

To empty the ashtray, push down *2 , andpull out.

CUP HOLDERS

CAUTION

. Avoid abrupt starting and braking whenthe cup holder is being used to preventspilling the drink. If the liquid is hot, itcan scald you or your passenger.

. Use only soft cups in the cup holder.Hard objects can injure you in anaccident.

Instruments and controls 2-49

ASHTRAY (if so equipped) STORAGE

Page 133: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-50 Instruments and controls

JVI0649X

Front

JVI0650X

Rear

Open the lid of the rear armrest to use thecup holder.

JVI0715X

SOFT BOTTLE HOLDER

CAUTION

. Do not use bottle holder for any otherobjects that could be thrown about inthe vehicle and possibly injure peopleduring sudden braking or an accident.

. Do not use bottle holder for open liquidcontainers.

Page 134: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0651X

SUNGLASSES HOLDER

WARNING

Keep the sunglasses holder closed whiledriving to prevent an accident.

To open the sunglasses holder, push thelid.

CAUTION

. Do not use for anything other thanglasses.

. Do not leave glasses in the sunglassesholder while parking in direct sunlight.The heat may damage the glasses.

JVI0652X

GLOVE BOX

WARNING

Keep glove box lid closed while driving tohelp prevent injury in an accident or asudden stop.

To open the glove box, pull the handle *1 .

To close, push the lid in until the locklatches.

To lock *2 /unlock *3 the glove box, usethe mechanical key. For the mechanical keyusage, see “Keys” (P.3-2).

Instruments and controls 2-51

Page 135: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-52 Instruments and controls

JVI0653X

CONSOLE BOXTo open the console box, push up the knob*A and pull up the lid.

To close, push the lid down until latched.

SIC4348

CARD HOLDERThe card holder is located on the driver’s orpassenger’s sun visor.

To use the card holder, slide the card in thecard holder.

JVI0664X

STORAGE BOXTo open, push the storage box lid.

Do not place valuable items in the storagebox.

Do not use the storage box as an ashtray.

Page 136: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIC3248

COAT HOOKSThe coat hooks are equipped beside therear personal lights.

CAUTION

Do not place items which are more than 2 lb(1 kg) on the hook.

SIC4350

TRUNK HOOKS

WARNING

. Always make sure that the cargo isproperly secured. Use the suitable ropesand hooks.

. Unsecured cargo can become dangerousin an accident or sudden stop.

CAUTION

Do not apply a total load of more than 22 lb(10 kg) to a single hook.

Instruments and controls 2-53

Page 137: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-54 Instruments and controls

POWER WINDOWS

WARNING

. Make sure that all passengers have theirhands, etc. inside the vehicle while it isin motion and before closing the win-dows. Use the window lock switch toprevent unexpected use of the powerwindows.

. Do not leave children unattended insidethe vehicle. They could unknowinglyactivate switches or controls and be-come trapped in the window. Unat-tended children could become involvedin serious accidents.

The power windows operate when theignition switch is in the ON position or forabout 45 seconds after the ignition switchis pushed to the OFF position. If thedriver’s or front passenger’s door isopened during this period of about 45seconds, power to the windows is can-celed.

JVI0740X

1. Driver side window2. Front passenger side window3. Rear left passenger side window4. Rear right passenger side window5. Window lock button

Main power window switch (driver’sside)To open or close the window, push down*A or pull up *B the switch and hold it.The main switch (driver side switches) willopen or close all the windows.

Locking passengers’ windowsWhen the lock button*C is pushed in, onlythe driver side window can be opened orclosed. Push it in again to cancel.

WINDOWS

Page 138: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIC4353

Passenger side power windowswitchThe passenger side switch will open orclose only the corresponding window. Toopen or close the window, push down orpull up the switch and hold it.

SIC4354

Automatic operationTo fully open or close the window, com-pletely push down or pull up the switchand release it; it need not be held. Thewindow will automatically open or close allthe way. To stop the window, just push orlift the switch in the opposite direction.

A light push or pull on the switch will causethe window to open or close until theswitch is released.

Auto reverse function

WARNING

There are some small distances immediatelybefore the closed position which cannot bedetected. Make sure that all passengershave their hands, etc., inside the vehiclebefore closing the window.

If the control unit detects somethingcaught in the window as it is closing, thewindow will be immediately lowered.

The auto reverse function can be activatedwhen the window is closed by automaticoperation when the ignition switch is in theON position or for 45 seconds after theignition switch is pushed to the OFFposition.

Depending on the environment or drivingconditions, the auto reverse function maybe activated if an impact or load similar tosomething being caught in the windowoccurs.

If the windows do not close auto-maticallyIf the power window automatic function

Instruments and controls 2-55

Page 139: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-56 Instruments and controls

(closing only) does not operate properly,perform the following procedure to initi-alize the power window system.

1. Push the ignition switch to the ONposition.

2. Close the door.

3. Open the window completely by oper-ating the power window switch.

4. Pull the power window switch and holdit to close the window, and then holdthe switch more than 3 seconds afterthe window is closed completely.

5. Release the power window switch.Operate the window by the automaticfunction to confirm the initialization iscomplete.

6. Perform steps 2 through 5 above forother windows.

If the power window automatic functiondoes not operate properly after performingthe procedure above, have your vehiclechecked by an INFINITI retailer.

WARNING

. In an accident you could be thrown fromthe vehicle through an open moonroof.Always use seat belts and child re-straints.

. Do not allow anyone to stand up orextend any portion of their body out ofthe moonroof opening while the vehicleis in motion or while the moonroof isclosing.

CAUTION

. Remove water drops, snow, ice or sandfrom the moonroof before opening.

. Do not place any heavy object on themoonroof or surrounding area.

AUTOMATIC MOONROOFThe moonroof only operates when theignition switch is in the ON position.

The automatic moonroof is operational forabout 45 seconds, even if the ignitionswitch is pushed to the OFF position. If thedriver’s door or the passenger’s door isopened during this period of about 45seconds, power to the moonroof is can-celed.

MOONROOF

Page 140: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0655X

SunshadeThe sunshade will open automaticallywhen the moonroof is opened. However,it must be closed manually.

Tilting the moonroofTo tilt up, first close the moonroof, thenpush the switch to the tilt up position *1and release it; it need not be held. To tiltdown the moonroof, push the switch to thetilt down position *2 .

Sliding the moonroofTo fully open or close the moonroof, pushthe switch to the open *2 or close *1

position and release it; it need not be held.The roof will automatically open or close allthe way. To stop the roof, push the switchonce more while it is opening or closing.

Operating moonroof with IntelligentKey (if so equipped)The moonroof can be opened by pushingthe UNLOCK button on the Intelligent Key.This function will not operate while themoonroof timer is activated or when themoonroof need to be initialized. For detailsabout the Intelligent Key button usage, see“How to use remote keyless entry system”

(P.3-15).

Opening:

To open the sunroof, push the UNLOCKbutton on the Intelligent Key for about 3seconds after the door is unlocked.

To stop opening, release the button.

Auto reverse function

WARNING

There are some small distances immediatelybefore the closed position which cannot bedetected. Make sure that all passengershave their hands, etc., inside the vehiclebefore closing the moonroof.

If the control unit detects somethingcaught in the moonroof when it is closing,the moonroof will be immediately opened.

The auto reverse function can be activatedwhen the moonroof is closed by automaticoperation when the ignition switch is in theON position or for about 45 seconds afterthe ignition switch is pushed to the OFFposition.

If the moonroof cannot be closed auto-matically when the auto reverse functionactivates due to a malfunction, push andhold the moonroof switch to the closeposition *1 .

Depending on the environment or drivingconditions, the auto reverse function maybe activated if an impact or load similar tosomething being caught in the moonroof

Instruments and controls 2-57

Page 141: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-58 Instruments and controls

occurs.

If the moonroof does not operateIf the moonroof does not operate properly,perform the following procedure to initi-alize the moonroof operation system.

1. If the moonroof is open, close it fully byrepeatedly pushing the moonroofswitch to the close position *1 to tiltthe moonroof up.

2. Push and hold the switch to the closeposition *1 .

3. Release the moonroof switch after themoonroof moves slightly up and down.

4. Push and hold the switch to the openposition *2 to fully tilt the moonroofdown.

5. Check if the moonroof switch operatesnormally.

If the moonroof does not operate properlyafter performing the procedure above, haveyour vehicle checked by an INFINITI retailer.

JVI0656X

MAP LIGHTSPush the button as illustrated to turn thelight on or off.

JVI0726X

CONSOLE LIGHT (if so equipped)The console light will turn on whenever theclearance lights or headlights are illumi-nated.

INTERIOR LIGHTS

Page 142: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIC3250

PERSONAL LIGHTSPush the button as illustrated to turn thelight on or off.

JVI0657X

INTERIOR LIGHT CONTROL SWITCH

*1 ON switchWhen the ON switch *1 is pushed in, themap lights and rear personal lights willilluminate. When the switch is pushed off,the lights will not illuminate, regardless ofthe condition.

*2 DOOR OFF switchWhen the DOOR OFF switch *2 is notpushed in, the map lights and rearpersonal lights will illuminate under thefollowing conditions:

. ignition switch is switched to the OFFposition— remain on for about 15 seconds.

. doors are unlocked by pushing theUNLOCK button on the Intelligent Keyor one touch unlock sensor with theignition switch in the LOCK position— remain on for about 15 seconds.

. any door is opened and then closedwith the ignition switch in the LOCKposition— remain on for about 15 seconds.

. any door is opened— remain on while the door is opened.

When the door is closed, the lightsgo off.

When the DOOR OFF switch *2 is pushedin, the map and rear personal lights willnot illuminate under the above condition.The map and rear personal lights can beturned on only with the ON switch *1 .

The lights will also turn off after a periodof time when the lights remain illuminatedafter the ignition switch has been pushedto the OFF or LOCK position to prevent the12-volt battery from becoming discharged.

When [Lamp ON When Door Unlocks] is setto the OFF position (see the Infiniti InTouch

Instruments and controls 2-59

Page 143: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-60 Instruments and controls

Owner’s Manual), the lights will illuminateunder the following condition:

. any door is opened with the ignitionswitch in any position— remain on while the door is opened.

When the door is closed, the lightsgo off.

CAUTION

Do not use for extended periods of time withthe INFINITI Direct Response Hybrid® Sys-tem stopped. This could result in a dis-charged 12-volt battery.

SIC3869

The light on the vanity mirror will turn onwhen the cover on the vanity mirror isopened.

When the cover is closed, the light will turnoff.

The lights will also turn off after a periodof time when the lights remain illuminatedto prevent the 12-volt battery from becom-ing discharged.

The light illuminates when the trunk lid isopened. When the trunk lid is closed, thelight will turn off.

The light will also turn off after a period oftime when the light remains illuminatedafter the ignition switch has been pushedto the OFF or LOCK position to prevent the12-volt battery from becoming discharged.

VANITY MIRROR LIGHTS TRUNK LIGHT

Page 144: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIC4328

When the doors are unlocked by pushingthe UNLOCK button on the Intelligent Keyor touching the one touch unlock sensorwith the ignition switch in the LOCKposition, the courtesy light *A will illumi-nate.

To activate or deactivate the courtesy light,set [Lamp ON When Door Unlocks]. See theInfiniti InTouch Owner’s Manual.

The HomeLink® Universal Transceiver pro-vides a convenient way to consolidate thefunctions of up to three individual hand-held transmitters into one built-in device.

HomeLink® Universal Transceiver:

. Will operate most Radio Frequency (RF)devices such as garage doors, gates,home and office lighting, entry doorlocks and security systems.

. Is powered by your vehicle’s 12-voltbattery. No separate batteries arerequired. If the vehicle’s 12-volt batteryis discharged or is disconnected,HomeLink® will retain all programming.

When the HomeLink® Universal Transcei-ver is programmed, retain the originaltransmitter for future programming proce-dures (Example: new vehicle purchases).Upon sale of the vehicle, the programmedHomeLink® Universal Transceiver buttonsshould be erased for security purposes.For additional information, refer to “Pro-gramming HomeLink®” (P.2-62).

WARNING

. Do not use the HomeLink® UniversalTransceiver with any garage door openerthat lacks safety stop and reverse

features as required by federal safetystandards. (These standards becameeffective for opener models manufac-tured after April 1, 1982). A garage dooropener which cannot detect an object inthe path of a closing garage door andthen automatically stop and reverse,does not meet current federal safetystandards. Using a garage door openerwithout these features increases the riskof serious injury or death.

. During the programming procedure yourgarage door or security gate will openand close (if the transmitter is withinrange). Make sure that people or objectsare clear of the garage door, gate, etc.that you are programming.

. Your vehicle’s INFINITI Direct ResponseHybrid® System should be turned offwhile programming the HomeLink® Uni-versal Transceiver. Do not breathe ex-haust gases; they contain colorless andodorless carbon monoxide. Carbon mon-oxide is dangerous. It can cause uncon-sciousness or death.

Instruments and controls 2-61

COURTESY LIGHT HomeLink® UNIVERSAL TRANSCEIVER

Page 145: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-62 Instruments and controls

PROGRAMMING HomeLink®

If you have any questions or are havingdifficulty programming your HomeLink®

buttons, refer to the HomeLink® web siteat: www.homelink.com or call 1-800-355-3515.

NOTE:

It is also recommended that a new batterybe placed in the hand-held transmitter ofthe device being programmed toHomeLink® for quicker programming andaccurate transmission of the radio-fre-quency.

1. Position the end of your hand-heldtransmitter 1-3 in (26-76 mm) awayfrom the HomeLink® surface, keepingthe HomeLink® indicator light *1 inview.

JVI0428X

2. Using both hands, simultaneouslypress and hold the desired HomeLink®

button and handheld transmitter but-ton. DO NOT release until theHomeLink

®

indicator light *1 flashesslowly and then rapidly. When theindicator light flashes rapidly, bothbuttons may be released. (The rapidflashing indicates successful program-ming.)

NOTE:Some devices to be programmed mayrequire you to replace Step 2 with thecycling procedure noted in the “Pro-gramming HomeLink® for Canadian

customers and gate openers” (P.2-63).

Page 146: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVI0429X

3. Press and hold the programmedHomeLink® button and observe theindicator light.. If the indicator light *1 is solid/

continuous, programming is com-plete and your device should acti-vate when the HomeLink® button ispressed and released.

. If the indicator light *1 blinksrapidly for two seconds and thenturns to a solid/continuous light,continue with Steps 4-6 for a rollingcode device. A second person maymake the following steps easier. Usea ladder or other device. Do not

stand on your vehicle to perform thenext steps.

4. At the receiver located on the garagedoor opener motor in the garage, locatethe “learn” or “smart” button (thename and color of the button may varyby manufacturer but it is usuallylocated near where the hanging anten-na wire is attached to the unit). If thereis difficulty locating the button, refer-ence the garage door opener’s manual.

5. Press and release the “learn” or“smart” button.

NOTE:Once the button is pressed, you haveapproximately 30 seconds to initiatethe next step.

6. Return to the vehicle and firmly pressand hold the programmed HomeLink®

button for two seconds and release.Repeat the “press/hold/release” se-quence up to 3 times to complete theprogramming process. HomeLink®

should now activate your rolling codeequipped device.

7. If you have any questions or are havingd i f f i c u l t y p r o g r amm i n g y o u rHomeLink® buttons, refer to the

HomeLink® web site at: www.homelink.com or call 1-800-355-3515.

PROGRAMMING HomeLink® FORCANADIAN CUSTOMERS AND GATEOPENERSCanadian radio-frequency laws requiretransmitter signals to “time-out” (or quit)after several seconds of transmission –

which may not be long enough forHomeLink® to pick up the signal duringprogramming. Similar to this Canadianlaw, some U.S. gate operators are de-signed to “time-out” in the same manner.

If you live in Canada or you are havingdifficulties programming a gate operator orgarage door opener by using the “Pro-gramming HomeLink®” procedures, re-place “Programming HomeLink®” Step 2with the following:

NOTE:

When programming a garage door opener,etc., unplug the device during the “cy-cling” process to prevent possible damageto the garage door opener components.

Step 2: Using both hands, simultaneouslypress and hold the desired HomeLink®

button and the hand-held transmitter

Instruments and controls 2-63

Page 147: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-64 Instruments and controls

button. During programming, your hand-held transmitter may automatically stoptransmitting. Continue to press and holdthe desired HomeLink® button while youpress and re-press (“cycle”) your hand-held transmitter every two seconds untilthe frequency signal has been learned. TheHomeLink® indicator light will flash slowlyand then rapidly after several secondsupon successful programming. DO NOTrelease until the HomeLink® indicator lightflashes slowly and then rapidly. When theindicator light flashes rapidly, both buttonsmay be released. The rapid flashingindicates successful programming.

Proceed with “Programming HomeLink®”step 3 to complete.

Remember to plug the device back in whenprogramming is completed.

OPERATING THE HomeLink® UNI-VERSAL TRANSCEIVERThe HomeLink® Universal Transceiver, afterit is programmed, can be used to activatethe programmed device. To operate, simplypress and release the appropriate pro-grammed HomeLink® Universal Transceiverbutton. The amber indicator light willilluminate while the signal is being trans-

mitted.

For convenience, the hand-held transmitterof the device may also be used at any time.

PROGRAMMING TROUBLESHOOT-INGIf the HomeLink® does not quickly learnthe hand-held transmitter information:

. replace the hand-held transmitter bat-teries with new batteries.

. position the hand-held transmitter withits battery area facing away from theHomeLink® surface.

. press and hold both the HomeLink®

and hand-held transmitter buttonswithout interruption.

. position the hand-held transmitter 1-3in (26-76 mm) away from theHomeLink® surface. Hold the transmit-ter in that position for up to 15seconds. If HomeLink® is not pro-grammed within that time, try holdingthe transmitter in another position -keeping the indicator light in view at alltimes.

If you have any questions or are havingdifficulty programming your HomeLink®

buttons, refer to the HomeLink® web siteat: www.homelink.com or 1-800-355-3515.

CLEARING THE PROGRAMMED IN-FORMATIONThe following procedure clears the pro-grammed information from both buttons.Individual buttons cannot be cleared.However, individual buttons can be repro-grammed, see “Reprogramming a singleHomeLink® button” (P.2-64).

To clear all programming1. Press and hold the two outer

HomeLink® buttons until the indicatorlight begins to flash in approximately10 seconds. Do not hold for longer than20 seconds.

2. Release both buttons.

HomeLink® is now in the programmingmode and can be programmed at any timebeginning with “Programming HomeLink®”- Step 1.

REPROGRAMMING A SINGLEHomeLink® BUTTONTo reprogram a HomeLink® UniversalTransceiver button, complete the following.

1. Press and hold the desired HomeLink®

button. Do not release the button.

Page 148: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2. The indicator light will begin to flashafter 20 seconds. Without releasing theHomeLink® button, proceed with “Pro-gramming HomeLink®” - Step 1.

For questions or comments, contactHomeLink® at: www.homelink.com or 1-800-355-3515.

The HomeLink® Universal Transceiver but-ton has now been reprogrammed. The newdevice can be activated by pushing theHomeLink® button that was just pro-grammed. This procedure will not affectany other programmed HomeLink® but-tons.

IF YOUR VEHICLE IS STOLENIf your vehicle is stolen, you should changethe codes of any non-rolling code devicethat has been programmed intoHomeLink®. Consult the Owner’s Manualof each device or call the manufacturer orretailer of those devices for additionalinformation.

When your vehicle is recovered, you willneed to reprogram the HomeLink® Uni-versal Transceiver with your new transmit-ter information.

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interfer-ence received, including interference thatmay cause undesired operation.

NOTE:

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with RSS-210 ofIndustry Canada. Operation is subject tothe following two conditions: (1) thisdevice may not cause interference, and(2) this device must accept any interfer-ence, including interference that maycause undesired operation of the device.

Instruments and controls 2-65

Page 149: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2-66 Instruments and controls

MEMO

Page 150: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3 Pre-driving checks and adjustments

Keys .................................................................... 3-2Intelligent Key ................................................. 3-2Valet hand-off.................................................. 3-3

Doors .................................................................. 3-4Locking with mechanical key ........................... 3-4Opening and closing windows withmechanical key................................................ 3-4Locking with inside lock knob ......................... 3-5Locking with power door lock switch ............... 3-5Automatic door locks....................................... 3-5Child safety rear door lock .............................. 3-6

Intelligent Key system ......................................... 3-6Intelligent Key operating range........................ 3-8Door locks/unlocks precaution ....................... 3-9Intelligent Key operation ................................. 3-9Battery saver system..................................... 3-12Warning signals............................................. 3-12Troubleshooting guide................................... 3-13Log-in function .............................................. 3-14

Remote keyless entry system............................. 3-14How to use remote keyless entry system....... 3-15

Hood................................................................. 3-18Trunk lid ........................................................... 3-19

Trunk lid release switch ............................... 3-19Trunk open request switch........................... 3-19TRUNK button .............................................. 3-20Trunk release power cancel switch............... 3-20Interior trunk lid release .............................. 3-21

Fuel-filler door................................................... 3-21Opening the fuel-filler door.......................... 3-21Fuel-filler cap............................................... 3-22

Tilt/telescopic steering...................................... 3-24Electric operation......................................... 3-24

Sun visors......................................................... 3-25Mirrors.............................................................. 3-25

Inside mirror................................................ 3-25Outside mirrors............................................ 3-26Vanity mirror................................................ 3-28

Automatic drive positioner (if so equipped) ....... 3-28Entry/exit function ....................................... 3-28Memory storage........................................... 3-29System operation......................................... 3-30

Page 151: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-2 Pre-driving checks and adjustments

A key number plate is supplied with yourkeys. Record the key number and keep it ina safe place (such as your wallet), not inthe vehicle. If you lose your keys, see anINFINITI retailer for duplicates by using thekey number. INFINITI does not record anykey numbers so it is very important to keeptrack of your key number plate.

A key number is only necessary when youhave lost all keys and do not have one toduplicate from. If you still have a key, thiskey can be duplicated by an INFINITIretailer.

SPA2865

1. Intelligent Keys (2)2. Mechanical keys (inside the Keys) (2)3. Key number plate (1)

INTELLIGENT KEYYour vehicle can only be driven with theIntelligent Keys which are registered toyour vehicle’s Intelligent Key system com-ponents and INFINITI Vehicle ImmobilizerSystem components. As many as 4 Intelli-gent Keys can be registered and used withone vehicle. The new keys must beregistered by an INFINITI retailer prior touse with the Intelligent Key system andINFINITI Vehicle Immobilizer System of yourvehicle. Since the registration process

requires erasing all memory in the Intelli-gent Key components when registeringnew keys, be sure to take all IntelligentKeys that you have to the INFINITI retailer.

It is possible that the Intelligent Keyfunctions become canceled. Contact anINFINITI retailer.

CAUTION

. Be sure to carry the Intelligent Key withyou when driving. The Intelligent Key is aprecision device with a built-in transmit-ter. To avoid damaging it, please notethe following.

— The Intelligent Key is water resis-tant; however, wetting may damagethe Intelligent Key. If the IntelligentKey gets wet, immediately wipe untilit is completely dry.

— Do not bend, drop or strike itagainst another object.

— If the outside temperature is below148F (−108C), the battery of theIntelligent Key may not functionproperly.

KEYS

Page 152: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

— Do not place the Intelligent Key foran extended period in a place wheretemperatures exceed 1408F (608C).

— Do not change or modify the In-telligent Key.

— Do not use a magnet key holder.

— Do not place the Intelligent Key nearan electric appliance such as atelevision set or personal computer.

— Do not allow the Intelligent Key tocome into contact with water or saltwater, and do not wash it in awashing machine. This could affectthe system function.

. If an Intelligent Key is lost or stolen,INFINITI recommends erasing the ID codeof that Intelligent Key. This will preventthe Intelligent Key from unauthorizeduse to unlock the vehicle. For informa-tion regarding the erasing procedure,contact an INFINITI retailer.

SPA2033

Mechanical keyTo remove the mechanical key, release thelock knob at the back of the Intelligent Key.

To install the mechanical key, firmly insertit into the Intelligent Key until the lockknob returns to the lock position.

Use the mechanical key to lock or unlockthe doors and glove box, if they areequipped with a key cylinder.

See “Doors” (P.3-4) and “Glove box” (P.2-51).

CAUTION

Always carry the mechanical key installed inthe key.

VALET HAND-OFFWhen you have to leave a key with a valet,give them the Intelligent Key itself andkeep the mechanical key with you toprotect your belongings.

To prevent the glove box from beingopened during valet hand-off, follow theprocedures below.

1. Push the trunk release power cancelswitch to the OFF (cancel) side.

2. Remove the mechanical key from theIntelligent Key.

3. Lock the glove box with the mechanicalkey.

4. Hand the Intelligent Key to the valet,keeping the mechanical key in yourpocket or bag for insertion into theIntelligent Key when you retrieve yourvehicle.

See “Trunk lid” (P.3-19) and “Glove box”(P.2-51).

Pre-driving checks and adjustments 3-3

Page 153: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-4 Pre-driving checks and adjustments

WARNING

. Always have the doors locked whiledriving. Along with the use of seat belts,this provides greater safety in the eventof an accident by helping to preventpersons from being thrown from thevehicle. This also helps keep childrenand others from unintentionally openingthe doors, and will help keep outintruders.

. Before opening any door, always look forand avoid oncoming traffic.

. Do not leave children unattended insidethe vehicle. They could unknowinglyactivate switches or controls. Unat-tended children could become involvedin serious accidents.

JVP0231X

LOCKING WITH MECHANICAL KEYThe power door lock system allows you tolock or unlock all doors simultaneouslyusing the mechanical key.

. Turning the driver’s door key cylinder tothe front of the vehicle *1 will lock alldoors.

. Turning the driver’s door key cylinderonce to the rear of the vehicle *2 willunlock the driver’s door. After returningthe key to the neutral position *3 ,turning it to the rear again within 60seconds will unlock all doors.

. You can switch the lock system to themode that allows you to open all thedoors when the key is turned once.(See the Infiniti InTouch Owner’s Man-ual for details.)

OPENING AND CLOSING WINDOWSWITH MECHANICAL KEYThe driver’s door key operation also allowsyou to open and close the window that isequipped with the automatic open/closefunction. (See “Power windows” (P.2-54).)

To open the window, turn the driver’s doorkey cylinder to the rear of the vehicle forlonger than 1 second. The door is unlockedand the window keeps opening whileturning the key.

This function can also be performed bypushing and holding the UNLOCK buttonon the Intelligent Key. (See “Remote key-less entry system” (P.3-14).)

To close the window, turn the driver’s doorkey cylinder to the front of the vehicle forlonger than 1 second. The door is lockedand the window keeps closing while turn-ing the key.

DOORS

Page 154: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SPA2726

LOCKING WITH INSIDE LOCK KNOBTo lock the door individually, move theinside lock knob to the lock position *1then close the door.

To unlock, move the inside lock knob to theunlock position *2 .

When locking the door without an Intelli-gent Key, be sure not to leave theIntelligent Key inside the vehicle.

SPA2727

LOCKING WITH POWER DOOR LOCKSWITCHOperating the power door lock switch willlock or unlock all the doors. The switchesare located on the driver’s and frontpassenger’s door armrests.

To lock the doors, push the power doorlock switch to the lock position*1 with thedriver’s or front passenger’s door open,then close the door.

When locking the door this way, be certainnot to leave the Intelligent Key inside thevehicle.

To unlock the doors including the fuel-filler

door, push the power door lock switch tothe unlock position *2 .

Lockout protectionWhen the power door lock switch is movedto the lock position and any door open, alldoors will lock and unlock automatically.With the Intelligent Key left in the vehicleand any door open, all doors will unlockautomatically and a chime will sound afterthe door is closed.

These functions help to prevent the In-telligent Key from being accidentallylocked inside the vehicle.

AUTOMATIC DOOR LOCKS. All doors lock automatically when the

vehicle speed reaches 15 MPH (24km/h).

. All doors unlock automatically when theignition switch is placed in the OFFposition.

The automatic unlock function can bedeactivated or activated. To deactivate oractivate the automatic door unlock system,perform the following procedure:

1. Close all doors.

2. Place the ignition switch in the ONposition.

Pre-driving checks and adjustments 3-5

Page 155: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-6 Pre-driving checks and adjustments

3. Within 20 seconds of performing Step2, push and hold the power door lockswitch to the position (UNLOCK) formore than 5 seconds.

4. When activated, the hazard indicatorwill flash twice. When deactivated, thehazard indicator will flash once.

5. The ignition switch must be placed inthe OFF and ON position again betweeneach setting change.

When the automatic door unlock system isdeactivated, the doors do not unlock whenthe ignition switch is placed in the OFFposition. To unlock the door manually, usethe inside lock knob or the power door lockswitch (driver’s or front passenger’s side).

The automatic door unlock function can bechanged on the lower display. (See theInfiniti InTouch Owner’s Manual.)

SPA2536

CHILD SAFETY REAR DOOR LOCKThe child safety rear door lock helpsprevent doors from being opened acciden-tally, especially when small children are inthe vehicle.

When the levers are in the lock position*1 , the rear doors can be opened onlyfrom the outside.

To disengage, move the levers to theunlock position *2 .

WARNING

. Radio waves could adversely affectelectric medical equipment. Those whouse a pacemaker should contact theelectric medical equipment manufacturerfor the possible influences before use.

. The Intelligent Key transmits radiowaves when the buttons are pushed.The FAA advises that the radio wavesmay affect aircraft navigation and com-munication systems. Do not operate theIntelligent Key while on an airplane.Make sure the buttons are not operatedunintentionally when the unit is storedduring a flight.

The Intelligent Key system can operate allthe doors and the trunk lid using theremote controller function, using one touchunlock function or pushing the requestswitch on the vehicle without taking thekey out from a pocket or purse. Theoperating environment and/or conditionsmay affect the Intelligent Key systemoperation.

Be sure to read the following before usingthe Intelligent Key system.

INTELLIGENT KEY SYSTEM

Page 156: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

CAUTION

. Be sure to carry the Intelligent Key withyou when operating the vehicle.

. Never leave the Intelligent Key in thevehicle when you leave the vehicle.

The Intelligent Key is always communicat-ing with the vehicle as it receives radiowaves. The Intelligent Key system trans-mits weak radio waves. Environmentalconditions may interfere with the operationof the Intelligent Key system under thefollowing operating conditions.

. When operating near a location wherestrong radio waves are transmitted,such as a TV tower, power station andbroadcasting station.

. When in possession of wireless equip-ment, such as a cellular telephone,transceiver, and CB radio.

. When the Intelligent Key is in contactwith or covered by metallic materials.

. When any type of radio wave remotecontrol is used nearby.

. When the Intelligent Key is placed nearan electric appliance such as a perso-

nal computer.. When the vehicle is parked near a

parking meter.In such cases, correct the operating condi-tions before using the Intelligent Keyfunction or use the mechanical key.

Although the life of the battery variesdepending on the operating conditions,the battery’s life is approximately 2 years.If the battery is discharged, replace it witha new one.

When the Intelligent Key battery is almostdischarged, see “Intelligent Key batterydischarge” (P.5-13) to start the hybridsystem.

Since the Intelligent Key is continuouslyreceiving radio waves, if the key is left nearequipment which transmits strong radiowaves, such as signals from a TV andpersonal computer, the battery life maybecome shorter.

For information regarding replacement of abattery, see “Intelligent Key battery repla-cement” (P.8-25).

As many as 4 Intelligent Keys can beregistered and used with one vehicle. Forinformation about the purchase and use ofadditional Intelligent Keys, contact an

INFINITI retailer.

CAUTION

. Do not allow the Intelligent Key, whichcontains electrical components, to comeinto contact with water or salt water.This could affect the system function.

. Do not drop the Intelligent Key.

. Do not strike the Intelligent Key sharplyagainst another object.

. Do not change or modify the IntelligentKey.

. Wetting may damage the Intelligent Key.If the Intelligent Key gets wet, immedi-ately wipe until it is completely dry.

. Do not place the Intelligent Key for anextended period in an area wheretemperatures exceed 1408F (608C).

. If the outside temperature is below 148F(−108C), the battery of the IntelligentKey may not function properly.

. Do not attach the Intelligent Key with akey holder that contains a magnet.

. Do not place the Intelligent Key nearequipment that produces a magneticfield, such as a TV, audio equipment

Pre-driving checks and adjustments 3-7

Page 157: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-8 Pre-driving checks and adjustments

and personal computers.

If an Intelligent Key is lost or stolen,INFINITI recommends erasing the ID codeof that Intelligent Key from the vehicle. Thismay prevent the unauthorized use of theIntelligent Key to operate the vehicle. Forinformation regarding the erasing proce-dure, contact an INFINITI retailer.

JVP0225X

INTELLIGENT KEY OPERATINGRANGEThe Intelligent Key functions can only beused when the Intelligent Key is within thespecified operating range from the onetouch unlock sensor/door request switch*1 and trunk open request switch *2 .

When the Intelligent Key battery is dis-charged or strong radio waves are presentnear the operating location, the IntelligentKey system’s operating range becomesnarrower, and the Intelligent Key may notfunction properly.

The operating range is within 31.50 in (80

cm) from each one touch unlock sensor/door handle request switch *1 and trunkopen request switch *2 .

If the Intelligent Key is too close to the doorglass, handle or rear bumper, the onetouch unlock sensor and request switchesmay not function.

When the Intelligent Key is within theoperating range, it is possible for anyonewho does not carry the Intelligent Key touse the one touch unlock sensor or requestswitches to lock or unlock the doors andopen the trunk lid.

Page 158: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SPA2407

DOOR LOCKS/UNLOCKS PRECAU-TION. Do not push the door handle request

switch with the Intelligent Key held inyour hand as illustrated. The closedistance to the door handle will causethe Intelligent Key system to havedifficulty recognizing that the Intelli-gent Key is outside the vehicle.

. Within 2 seconds after the door arelocked using the door handle requestswitch, make sure that the doors havebeen securely locked by operating thedoor handles. If you keep holding thedoor handle for more than 2 seconds

after locking the doors using the doorhandle request switch, the door will beunlocked.

. To prevent the Intelligent Key frombeing left inside the vehicle or thetrunk, make sure you carry the key withyou and then lock the doors or thetrunk.

. The Intelligent Key system (opening/closing doors with the door handlerequest switch or one touch unlocksensor) can be set to remain inactive.(See the Infiniti InTouch Owner’s Man-ual.)

. The door cannot be unlocked using onetouch unlock operation after locking thedoor within 2 seconds. To unlock thedoor, release the door handle once andhold it again.

. Do not hold and pull the door handlequickly. The door will be unlocked butwill not open. Release the door handleonce and pull it again to open the door.

. If you pull the door handle with yourgloved hand, the one touch unlockoperation may not function.

JVP0232X

INTELLIGENT KEY OPERATIONYou can lock or unlock the doors withouttaking the key out from your pocket or bag.

Pre-driving checks and adjustments 3-9

Page 159: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-10 Pre-driving checks and adjustments

JVP0233X

JVP0209X

When you carry the Intelligent Key with

you, you can lock all doors by pushing thedoor handle request switch *A (driver’s orfront passenger’s) within the range ofoperation.

You can also unlock the correspondingdoor by touching the one touch unlocksensor *B (driver’s or front passenger’s)within the range of operation, and canunlock the other doors using the doorhandle request switch *A .

When you lock or unlock the doors or thetrunk lid, the hazard indicator will flashand the horn (or the outside chime) willsound as a confirmation. For details, see“Setting hazard indicator and horn mode”(P.3-16).

CAUTION

. After locking the doors using the requestswitch, make sure that the doors havebeen securely locked by operating thedoor handles.

. When locking the doors using therequest switch, make sure to have theIntelligent Key in your possession beforeoperating the request switch to preventthe Intelligent Key from being left in the

vehicle.

. The request switch is operational onlywhen the Intelligent Key has beendetected by the Intelligent Key system.

Lockout protectionTo prevent the Intelligent Key from beingaccidentally locked in the vehicle, lockoutprotection is equipped with the IntelligentKey system.

When the driver’s side door is open, thedoors are locked, and then the IntelligentKey is put inside the vehicle and all thedoors are closed; the lock will automati-cally unlock and the door buzzer sounds.

NOTE:

The doors may not lock when the Intelli-gent Key is in the same hand that isoperating the request switch to lock thedoor. Put the Intelligent Key in a purse,pocket or your other hand.

CAUTION

The lockout protection may not functionunder the following conditions:

Page 160: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. When the Intelligent Key is placed on topof the instrument panel.

. When the Intelligent Key is placed insidethe glove box or a storage bin.

. When the Intelligent Key is placed insidethe door pockets.

. When the Intelligent Key is placed insideor near metallic materials.

Locking doors and fuel-filler door1. Push the ignition switch to the OFF

position and make sure you carry theIntelligent Key with you.*1

2. Close all the doors.*2

3. Push the door handle request switch(driver’s or front passenger’s) *A whilecarrying the Intelligent Key with you.*3

4. All the doors and fuel-filler door willlock.

5. The hazard indicator flashes twice andthe outside chime sounds twice.

*1: Doors will lock with the Intelligent Keywhile the ignition switch is in the ACCor ON position.

*2: Doors will not lock with the IntelligentKey while any door is open.

*3: Doors will not lock by pushing thedoor handle request switch with theIntelligent Key inside the vehicle.However, when an Intelligent Key isinside the vehicle, doors can belocked with another registered Intelli-gent Key.

Unlocking doors and fuel-filler door1. Hold the outside door handle (driver’s

or front passenger’s) while carrying theIntelligent Key with you.

2. The hazard indicator flashes once andthe outside chime sounds once. Thecorresponding door will unlock.

3. Push the door handle request switchwithin 1 minute.

4. The hazard indicator flashes once andthe outside chime sounds once again.All the doors and the fuel-filler door willunlock.

All doors and the fuel-filler door will belocked automatically unless one of thefollowing operations is performed within 1minute after pushing the request switch ortouch unlock operation while the doors arelocked.

. Opening any door

. Pushing the ignition switchDuring this 1-minute time period, if theUNLOCK button on the Intelligent Keyis pushed, all doors will be locked auto-matically after another 1 minute.

Pre-driving checks and adjustments 3-11

Page 161: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-12 Pre-driving checks and adjustments

SPA2731

SPA2732

Opening trunk lid1. Push the trunk open request switch *A

for more than 1 second.

2. The trunk will unlatch. An outsidechime will sound four times.

3. Raise the trunk lid to open the trunk.

Lockout protection:

To prevent the Intelligent Key from beingaccidentally locked in the trunk, lockoutprotection is equipped with the IntelligentKey system.

When the trunk lid is closed with theIntelligent Key inside the trunk, the outsidechime will sound and the trunk will open.

BATTERY SAVER SYSTEMWhen all the following conditions are metfor a period of time, the 12-volt batterysaver system will cut off the power supplyto prevent battery discharge.

. The ignition switch is in the ACCposition, and

. All doors are closed, and

. The shift lever is in the P (Park)position.

WARNING SIGNALSTo help prevent the vehicle from movingunexpectedly by erroneous operation ofthe Intelligent Key listed on the followingchart or to help prevent the vehicle frombeing stolen, chime or beep sounds insideand outside the vehicle and a warningdisplays in the vehicle information display.

When a chime or beep sounds or thewarning displays, be sure to check thevehicle and Intelligent Key.

See “Troubleshooting guide” (P.3-13) and“Vehicle information display” (P.2-21).

Page 162: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

TROUBLESHOOTING GUIDE

Symptom Possible cause Action to take

When pushing the ignition switchto stop the INFINITI Direct Re-sponse Hybrid® System

The SHIFT P warning appears on the displayand the inside warning chime sounds con-tinuously.

The shift lever is not in the P (Park)position. Shift the shift lever to the P (Park) position.

When shifting the shift lever tothe P (Park) position.

The inside warning chime sounds continu-ously.

The ignition switch is in the ACC or ONposition. Push the ignition switch to the OFF position.

When opening the driver’s door toget out of the vehicle

The inside warning chime sounds continu-ously.

The ignition switch is in the ACCposition. Push the ignition switch to the OFF position.

When closing the door after get-ting out of the vehicle

The NO KEY warning appears on the display,the outside chime sounds 3 times and theinside warning chime sounds for a fewseconds.

The ignition switch is in the ACC or ONposition. Push the ignition switch to the OFF position.

The SHIFT P warning appears on the displayand the outside chime sounds continuously.

The ignition switch is in the ACC or OFFposition and the shift lever is not in theP (Park) position.

Move the shift lever to the P (Park) positionand push the ignition switch to the OFFposition.

When closing the door with theinside lock knob turned to LOCK

The outside chime sounds for a few secondsand all the doors unlock.

The Intelligent Key is inside the vehicleor trunk. Carry the Intelligent Key with you.

When pushing the request switchor LOCK button on the IntelligentKey to lock the door

The outside chime sounds for a few seconds.The Intelligent Key is inside the vehicleor trunk. Carry the Intelligent Key with you.

A door is not closed securely. Close the door securely.

When closing the trunk lid The outside chime sounds for approximately10 seconds and the trunk lid opens. The Intelligent Key is inside the trunk. Carry the Intelligent Key with you.

Pre-driving checks and adjustments 3-13

Page 163: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-14 Pre-driving checks and adjustments

LOG-IN FUNCTIONAfter setting up the user information, thesystem will automatically recognize theuser upon turning on the vehicle.

There will be a personalized welcomegreeting and screen prompt to log-in.

This feature allows 4 drivers to use theirown registration, drive mode, driving posi-tion, air conditioner, and auto settings andmemorizes these custom settings.

The log-in user can be changed on thewelcome greeting screen or the User Listscreen. For more details, see the InfinitiInTouch Owner’s Manual.

The log-in function is linked to the follow-ing items:

. Meter

. Audio

. Navigation system display (if soequipped)

. Navigation settings (if so equipped)

. Air conditioner

. Automatic drive positioner (if soequipped)

. Engine·Transmission

. Steering

. Active trace control

. Driver assistance (if so equipped) WARNING

The Intelligent Key transmits radio waveswhen the buttons are pushed. The FAAadvises that the radio waves may affectaircraft navigation and communication sys-tems. Do not operate the Intelligent Keywhile on an airplane. Make sure the buttonsare not operated unintentionally when theunit is stored during a flight.

It is possible to lock/unlock all doors andfuel-filler door, open the trunk lid, activatethe panic alarm and open the windows bypushing the buttons on the Intelligent Keyfrom outside the vehicle.

Before locking the doors, make sure theIntelligent Key is not left in the vehicle.

The remote keyless entry function canoperate at a distance of approximately 33ft (10 m) from the vehicle. (The effectivedistance depends upon the conditionsaround the vehicle.)

As many as 4 Intelligent Keys can be usedwith one vehicle. For information concern-ing the purchase and use of additionalIntelligent Keys, contact an INFINITI retai-ler.

REMOTE KEYLESS ENTRY SYSTEM

Page 164: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The buttons on the Intelligent Key will notoperate when:

. the distance between the Intelligent Keyand the vehicle is over 33 ft (10 m).

. the Intelligent Key battery is dis-charged.

After locking with the remote keyless entryfunction, pull the door handle to make surethe doors are securely locked.

The LOCK/UNLOCK operating range variesdepending on the environment. To securelyoperate the lock and unlock buttons,approach the vehicle to about 3 ft (1 m)from the door.

SPA2100

1. LOCK button2. UNLOCK button3. TRUNK button4. PANIC button

HOW TO USE REMOTE KEYLESSENTRY SYSTEMWhen you lock or unlock the doors or thetrunk lid, the hazard indicator will flashand the horn (or the outside chime) willsound as a confirmation. For details, see“Setting hazard indicator and horn mode”(P.3-16).

Locking doors and fuel-filler door1. Push the ignition switch to the OFF

position and make sure you carry theIntelligent Key with you.*1

2. Close all the doors.

3. Push the LOCK button *1 on theIntelligent Key.

4. All the doors and fuel-filler door willlock.

5. The hazard indicator flashes twice andthe horn chirps once.

*1: Doors will lock with the Intelligent Keywhile the ignition switch is in the ACCor ON position.

Unlocking doors and fuel-filler door1. Push the UNLOCK button*2 on the

Intelligent Key once.

2. The hazard indicator flashes once. Thedriver’s door will unlock.

3. Push the UNLOCK button*2 on theIntelligent Key again within 1 minute.

4. The hazard indicator flashes onceagain. All the doors and the fuel-fillerdoor will unlock.

All doors and the fuel-filler door will belocked automatically unless one of the

Pre-driving checks and adjustments 3-15

Page 165: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-16 Pre-driving checks and adjustments

following operations is performed within 1minute after pushing the UNLOCK *2button on the Intelligent Key while thedoors are locked. If during this 1-minutetime period, the UNLOCK *2 button onthe Intelligent Key is pushed, all doors willbe locked automatically after another 1minute.

. Opening any door

. Pushing the ignition switch

Opening windows (if so equipped)The UNLOCK button *2 operation alsoallows you to open the window that isequipped with the automatic open/closefunction. (See “Power windows” (P.2-54).)

To open the window, push the doorUNLOCK *2 button on the IntelligentKey for about 3 seconds after the door isunlocked.

To stop opening, release the UNLOCKbutton *2 .

If the window open operation is stopped inmid-operation while pushing the UNLOCK

button *2 , release and push theUNLOCK button *2 again until thewindow opens completely.

Window cannot be closed using the In-

telligent Key.

The door window can also be operated byturning the mechanical key in a door lock.(See “Doors” (P.3-4).)

Opening moonroof (if so equipped)The moonroof can be opened by pushingthe UNLOCK button *2 on the Intelli-gent Key. This function will not operatewhile the moonroof timer is activated orwhen the windows need to be initialized.

To open the moonroof, push the UNLOCKbutton *2 on the Intelligent Key for

about 3 seconds after the door is unlocked.

To stop opening, release the UNLOCKbutton *2 .

Opening trunk lid1. Push the TRUNK button *3 on the

Intelligent Key for more than 1 second.

2. The trunk will unlatch.

3. Raise the trunk lid to open the trunk.

Using panic alarmIf you are near your vehicle and feelthreatened, you may activate the alarm tocall attention as follows:

1. Push the PANIC button *4 on the

key for more than 1 second.

2. The theft warning alarm and headlightswill stay on for 25 seconds.

3. The panic alarm stops when:. It has run for 25 seconds, or. Any of the buttons on the Intelligent

Key are pushed. (Note: PANICbutton *4 or TRUNK button *3should be pushed for more than 1second.)

Setting hazard indicator and hornmodeThis vehicle is set in hazard indicator andhorn mode when you first receive thevehicle.

In hazard indicator and horn mode, whenthe LOCK button *1 is pushed, thehazard indicator flashes twice and the hornchirps once. When the UNLOCK button*2 is pushed, the hazard indicator flashesonce.

If horns are not necessary, the system canbe switched to the hazard indicator mode.

In hazard indicator mode, when the LOCKbutton *1 is pushed, the hazard

indicator flashes twice. When the UNLOCKbutton *2 is pushed, neither the

Page 166: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

hazard indicator nor the horn operates. Hazard indicator and horn mode:

DOOR LOCK DOOR UNLOCK TRUNK UNLOCK

Intelligent Key system(Using door handle or trunk

request switch)

HAZARD - twiceOUTSIDE CHIME - twice

HAZARD - onceOUTSIDE CHIME - once

HAZARD - noneOUTSIDE CHIME - 4times

Remote keyless entry system(Using , or button)

HAZARD - twiceHORN - once

HAZARD - onceHORN - none

HAZARD - noneHORN - none

Hazard indicator mode:

DOOR LOCK DOOR UNLOCK TRUNK UNLOCK

Intelligent Key system(Using door handle or trunk

request switch)

HAZARD - twiceOUTSIDE CHIME - none

HAZARD - noneOUTSIDE CHIME - none

HAZARD - noneOUTSIDE CHIME - 4times

Remote keyless entry system(Using , or button)

HAZARD - twiceHORN - none

HAZARD - onceHORN - none

HAZARD - noneHORN - none

Pre-driving checks and adjustments 3-17

Page 167: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-18 Pre-driving checks and adjustments

Switching procedure:

To switch the hazard indicator and horn(chime) operation, push the LOCK *1and UNLOCK *2 buttons on the In-telligent Key simultaneously for more than2 seconds.

. When the hazard indicator mode is set,the hazard indicator flashes 3 times.

. When the hazard indicator and hornmode is set, the hazard indicatorflashes once and the horn chirps once.

JVP0234X

1. Pull the hood lock release handle *1located below the instrument panel;the hood will then spring up slightly.

2. Pull the lever *2 up at the front of thehood with your fingertips and raise thehood.

3. When closing the hood, slowly closethe hood down to latch both the rightand left locks. Push the hood down tolock the hood securely into place.

WARNING

. Make sure the hood is completely closedand latched before driving. Failure to doso could cause the hood to fly open andresult in an accident.

. If you see steam or smoke coming fromthe engine compartment, to avoid injurydo not open the hood.

HOOD

Page 168: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

. Do not drive with the trunk lid open. Thiscould allow dangerous exhaust gases tobe drawn into the vehicle. See “Exhaustgas (carbon monoxide)” (P.5-3) of thismanual.

. Closely supervise children when they arearound cars to prevent them from play-ing and becoming locked in the trunkwhere they could be seriously injured.Keep the car locked, with the trunkclosed, when not in use, and preventchildren’s access to Intelligent Keys.

JVP0202X

TRUNK LID RELEASE SWITCHThe trunk lid release switch *A is locatedon the instrument panel.

To open the trunk lid, push the releaseswitch. To close, push the trunk lid down.

SPA2732

TRUNK OPEN REQUEST SWITCHThe trunk lid can be opened by pushing thetrunk open request switch *A when theIntelligent Key is within the operatingrange of the trunk lock/unlock functionregardless of the inside lock knob position.

The trunk lid can be opened by pushing thetrunk open request switch *A even if theIntelligent Key is not within the operatingrange of the trunk lock/unlock function,when all doors are unlocked by the powerdoor lock system, and the automaticunlock function.

(See “Intelligent Key system” (P.3-6).)

Pre-driving checks and adjustments 3-19

TRUNK LID

Page 169: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-20 Pre-driving checks and adjustments

TRUNK BUTTONThe trunk lid can be opened by pushing theTRUNK button on the Intelligent Key formore than 1 second.

The trunk lid can be opened by pushing thetrunk open request switch *A even if theIntelligent Key is not within the operatingrange of the trunk lock/unlock function,when all doors are unlocked by the powerdoor lock system, and the automaticunlock function.

(See “Remote keyless entry system” (P.3-14).) JVP0203X

TRUNK RELEASE POWER CANCELSWITCHWhen the switch located inside the glovebox is in the OFF position *A , the power tothe trunk lid will be canceled and the trunklid cannot be opened by the trunk lidrelease switch, the trunk open requestswitch or the TRUNK button on theIntelligent Key.

When you have to leave the vehicle with avalet and want to keep your belongingssafe in the glove box and the trunk, pushthis switch to OFF and lock the glove boxwith the mechanical key. Then leave the

vehicle and the Intelligent Key with thevalet and keep the mechanical key withyou.

(See “Keys” (P.3-2).)

To connect the power to the trunk lid, pushthe switch to the ON *B position.

Page 170: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SPA2768

INTERIOR TRUNK LID RELEASE

WARNING

Closely supervise children when they arearound cars to prevent them from playingand becoming locked in the trunk wherethey could be seriously injured. Keep the carlocked, with the trunk lid securely latched,when not in use, and prevent children’saccess to Intelligent Keys.

The interior trunk lid release mechanismallows opening of the trunk lid in the event

that people become locked inside the trunkor in the event of the loss of electricalpower such as a discharged 12-volt bat-tery.

Releasing inside the trunkTo open the trunk lid from the inside, pullthe release handle *1 until the lockreleases and push up on the trunk lid.The release lever is made of a material thatglows in the dark after a brief exposure toambient light.

The handle is located on the back of thetrunk lid as illustrated. SPA2735

OPENING THE FUEL-FILLER DOORTo open the fuel-filler door, unlock the fuel-filler door by using one of the followingoperations, then push the upper left sideof the door.

. Touch the one touch unlock sensor onone of the front door handles and thenpush the door handle request switchwhile carrying the Intelligent Key.

. Push the UNLOCK button on the Intelli-gent Key twice.

. Insert the mechanical key into the doorlock cylinder and turn it to the rear ofthe vehicle twice.

Pre-driving checks and adjustments 3-21

FUEL-FILLER DOOR

Page 171: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-22 Pre-driving checks and adjustments

. Push the power door lock switch to theUNLOCK position.

To lock, close the fuel-filler door securelyand lock all doors by operating the doorhandle request switch, the LOCK button onthe Intelligent Key, the mechanical key orthe power door lock switch.

FUEL-FILLER CAP

WARNING

. Gasoline is extremely flammable andhighly explosive under certain condi-tions. You could be burned or seriouslyinjured if it is misused or mishandled.Always stop the INFINITI Direct ResponseHybrid® System and do not smoke orallow open flames or sparks near thevehicle when refueling.

. Do not attempt to top off the fuel tankafter the fuel pump nozzle shuts offautomatically. Continued refueling maycause fuel overflow, resulting in fuelspray and possibly a fire.

. Use only an original equipment typefuel-filler cap as a replacement. It has abuilt-in safety valve needed for properoperation of the fuel system and emis-

sion control system. An incorrect cap canresult in a serious malfunction andpossible injury. It could also cause theMalfunction Indicator Light (MIL) tocome on.

. Never pour fuel into the throttle body toattempt to start your vehicle.

. Do not fill a portable fuel container inthe vehicle or trailer. Static electricitycan cause an explosion of flammableliquid, vapor or gas in any vehicle ortrailer. To reduce the risk of seriousinjury or death when filling portable fuelcontainers:

— Always place the container on theground when filling.

— Do not use electronic devices whenfilling.

— Keep the pump nozzle in contactwith the container while you arefilling it.

— Use only approved portable fuelcontainers for flammable liquid.

CAUTION

. If fuel is spilled on the vehicle body,flush it away with water to avoid paintdamage.

. Failure to tighten the fuel-filler capproperly may cause the MalfunctionIndicator Light (MIL) to illuminate. If the

light illuminates because the fuel-filler cap is loose or missing, tighten orinstall the cap and continue to drive thevehicle. The light should turn offafter a few driving trips. If the lightdoes not turn off after a few driving trips,have the vehicle inspected by an INFINITIretailer.

. The Loose Fuel Cap warning will appearif the fuel-filler cap is not properlytightened. It may take a few drivingtrips for the warning to be displayed.Failure to tighten the fuel-filler capproperly after the Loose Fuel Cap warn-ing appears may cause the Mal-function Indicator Light (MIL) toilluminate.

. For additional information, see “Mal-function Indicator Light (MIL)” (P.2-19).

Page 172: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVP0204X

To remove the fuel-filler cap:

1. Turn the fuel-filler cap counterclockwiseto remove.

2. Put the fuel-filler cap on the cap holder*1 while refueling.

To install the fuel-filler cap:

1. Insert the fuel-filler cap straight into thefuel-filler tube.

2. Turn the fuel-filler cap clockwise until asingle click is heard.

JVP0235X

Loose Fuel Cap warningThe Loose Fuel Cap warning appears in thevehicle information display when the fuel-filler cap is not tightened correctly after thevehicle has been refueled. It may take afew driving trips for the warning to bedisplayed.

To turn off the warning, perform thefollowing:

1. Remove and install the fuel-filler cap assoon as possible. (See “Fuel-filler cap”(P.3-22).)

2. Tighten the fuel-filler cap until a singleclick is heard.

3. Push the or switch *A on thesteering wheel for longer than 1 secondto turn off the Loose Fuel Cap warningafter tightening the fuel-filler cap.

Pre-driving checks and adjustments 3-23

Page 173: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-24 Pre-driving checks and adjustments

WARNING

. Do not adjust the steering wheel whiledriving. You could lose control of yourvehicle and cause an accident.

. Do not adjust the steering wheel anycloser to you than is necessary forproper steering operation and comfort.The driver’s air bag inflates with greatforce. If you are unrestrained, leaningforward, sitting sideways or out ofposition in any way, you are at greaterrisk of injury or death in a crash. Youmay also receive serious or fatal injuriesfrom the air bag if you are up against itwhen it inflates. Always sit back againstthe seatback and as far away as practicalfrom the steering wheel. Always use theseat belts.

JVP0205X

ELECTRIC OPERATION

Tilt or telescopic operationMove the lever to adjust the steering wheelup or down, forward or rearward to thedesired position.

Entry/Exit function operation (if soequipped):

The automatic drive positioner system willmake the steering wheel move up auto-matically when the driver’s door is openedwith the ignition switch in the LOCKposition. This lets the driver get into andout of the seat more easily.

For more information, see “Automatic drivepositioner” (P.3-28).

TILT/TELESCOPIC STEERING

Page 174: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SPA2471

1. To block glare from the front, swingdown the main sun visor *1 .

2. To block glare from the side, removethe main sun visor from the centermount and swing the visor to the side*2 .

3. Slide the sun visor *3 in or out asneeded.

SPA2447

INSIDE MIRRORAdjust the height and the angle of theinside mirror to the desired position.

Pre-driving checks and adjustments 3-25

SUN VISORS MIRRORS

Page 175: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-26 Pre-driving checks and adjustments

SPA2422A

Type A

SPA2450

Type B

Automatic anti-glare typeThe inside mirror is designed so that itautomatically changes reflection accordingto the intensity of the headlights of thefollowing vehicle.

The anti-glare system will be automaticallyturned on when the ignition switch ispushed to the ON position.

The anti-glare system also operates for theoutside mirrors (if so equipped).

When the anti-glare system is turned on,the indicator light *A will illuminate andexcessive glare from the headlights of thevehicle behind you will be reduced.

Type A: Push the switch*B to make theinside mirror operate normally and theindicator light will turn off. Push the

switch again to turn the system on.

Type B: Push the “*” switch *C to makethe inside mirror operate normally. Theindicator light will turn off. Push the “I”switch *D to turn the system on.

Do not allow any object to cover thesensors *E or apply glass cleaner onthem. Doing so will reduce the sensitivityof the sensor, resulting in improperoperation.

For the compass (if so equipped) opera-tion, see “Compass” (P.2-9).

For the HomeLink® Universal Transceiveroperation, see “HomeLink® UniversalTransceiver” (P.2-61).

OUTSIDE MIRRORS

WARNING

Objects viewed in the outside mirror on thepassenger side are closer than they appear.Be careful when moving to the right. Usingonly this mirror could cause an accident.Use the inside mirror or glance over yourshoulder to properly judge distances toother objects.

Page 176: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVP0246X

Adjusting outside mirrorsThe outside mirror control switch is locatedon the driver’s armrest.

The outside mirror will operate only whenthe ignition switch is in the ACC or ONposition.

Move the switch *1 right or left to selectthe right or left side mirror, then adjustusing the control switch *2 .

Defrosting outside mirrorsThe outside mirrors will be heated whenthe rear window defroster switch is oper-ated.

SPA1829

Foldable outside mirrorsFold the outside mirror by pushing ittoward the rear of the vehicle.

Reverse tilt-down feature (if soequipped)When backing up the vehicle, the right andleft outside mirrors will turn downwardautomatically to provide better rear visibi-lity.

1. Push the ignition switch to the ONposition.

2. Move the shift lever to the R (Reverse)position.

3. Select the right or left side mirror byoperating the outside mirror controlswitch.

4. The outside mirror surface movesdownward.

When one of the following conditions hasoccurred, the outside mirror surface willreturn to its original position.

. The shift lever is moved to any positionother than R (Reverse).

. The outside mirror control switch is setto the center position.

. The ignition switch is pushed to the OFFposition.

Automatic anti-glare (if soequipped)The outside rearview mirrors are designedso that they automatically change reflec-tion according to the intensity of theheadlights of the vehicle following you.

The anti-glare system will be automaticallyturned on when you push the ignitionswitch to the “ON” position.

Pre-driving checks and adjustments 3-27

Page 177: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-28 Pre-driving checks and adjustments

SIC3869

VANITY MIRRORTo use the front vanity mirror, pull downthe sun visor and pull up the cover.

The automatic drive positioner system hastwo features:

. Entry/exit function

. Memory storage

ENTRY/EXIT FUNCTIONThis system is designed so that the driver’sseat and steering column will automati-cally move when the shift lever is in the P(Park) position. This allows the driver to getinto and out of the driver’s seat moreeasily.

The driver’s seat will slide backward andthe steering wheel will move up when thedriver’s door is opened with the ignitionswitch in the LOCK position.

The driver’s seat and steering wheel willreturn to the previous positions when theignition switch is pushed to the ACCposition.

The driver’s seat will not return to theprevious positions if the seat or steeringadjusting switch is operated when the seatis at the exit position.

Cancel or activate entry/exit func-tionAll the following conditions must be metbefore cancelling or activating the entry/

exit function.

. The ignition switch is placed in theLOCK position.

. The entry/exit function is not in opera-tion.

. The following switches are not oper-ated.— Seat memory switches— Power seat switches— Electric tilting/telescopic steering

wheel switchThe entry/exit function can be activated orcanceled by pressing and holding the SETswitch for more than 10 seconds.

The indicator lights on the memoryswitches (1 and 2) will blink once whenthe function is canceled, and the indicatorlights will blink twice when the function isactivated. Note that the indicator lightsmay illuminate after 5 seconds whileholding the SET switch. Keep the SETswitch pressed for more than 10 secondsto turn on or off the entry/exit function.

The entry/exit function can also be acti-vated or canceled if the [Lift Steering uponExit] or [Slide Driver Seat Back on Exit] keyis turned to ON or OFF in the [Settings]menu on the lower display. (See the Infiniti

AUTOMATIC DRIVE POSITIONER (if soequipped)

Page 178: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

InTouch Owner’s Manual.)

Initialize entry/exit functionIf the battery cable is disconnected, or ifthe fuse opens, the entry/exit function willnot work though this function was set onbefore. In such a case, after connecting thebattery or replacing with a new fuse, openand close the driver’s door more than twotimes after the ignition switch is turnedfrom the ON position to the LOCK position.The entry/exit function will be activated.

JVP0240X

MEMORY STORAGETwo positions for the driver’s seat, steeringcolumn and outside mirrors can be storedin the automatic drive positioner memory.Follow these procedures to use the mem-ory system.

1. Adjust the driver’s seat, steering col-umn and outside mirrors to the desiredpositions by manually operating eachadjusting switch. For additional infor-mation, see “Seats” (P.1-2), “Tilt/tele-scopic steering” (P.3-24) and “Outsidemirrors” (P.3-26).

2. Push the SET switch and, within 5

seconds, push the memory switch (1or 2) fully for at least 1 second.

The indicator light for the pushedmemory switch will stay on for approxi-mately 5 seconds after pushing theswitch.

When the memory is stored in thememory switch (1 or 2), a buzzer willsound.

If memory is stored in the samememory switch, the previous memorywill be deleted.

Confirming memory storage. Push the ignition switch to the ON

position and push the SET switch. Ifthe main memory has not been stored,the indicator light will come on forapproximately 0.5 seconds. When thememory has stored in position, theindicator light will stay on for approxi-mately 5 seconds.

. If the 12-volt battery cable is discon-nected, or if the fuse opens, thememory will be canceled. In this case,reset the desired position using theprevious procedure.

Pre-driving checks and adjustments 3-29

Page 179: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-30 Pre-driving checks and adjustments

Selecting the memorized position1. Move the shift lever to the P (Park)

position.

2. Push the memory switch (1 or 2) fullyfor at least 1 second.

The driver’s seat, steering column andoutside mirrors will move to the mem-orized position with the indicator lightflashing, and then the light will stay onfor approximately 5 seconds.

Linking log-in function to a storedmemory positionThe log-in function can be linked to astored memory position with the followingprocedure.

1. Place the ignition switch in the ONposition while carrying an IntelligentKey that was registered to the vehiclewith the log-in function. For moredetails, see “Log-in function” (P.3-14).

2. Adjust the position of the driver’s seat,steering column and outside mirrorsmanually. See “Seats” (P.1-2), “Tilt/telescopic steering” (P.3-24) and “Out-side mirrors” (P.3-26).

3. Place the ignition switch in the OFFposition.

The next time you log in (selecting the useron the display) after placing the ignitionswitch in the ON position while carryingthe Intelligent Key, the system will auto-matically adjust to the memorized drivingposition.

SYSTEM OPERATIONThe automatic drive positioner system willnot work or will stop operating under thefollowing conditions:

. When the vehicle is moving.

. When the adjusting switch for thedriver’s seat and steering column isturned on while the automatic drivepositioner is operating.

. When the memory switch 1 or 2 ispushed for less than 1 second.

. When the seat, steering column andoutside mirrors have already beenmoved to the memorized position.

. When no position is stored in thememory switch.

. When the shift lever is moved from theP (Park) position to any other position.(However, it will not be canceled if theswitch is pushed while the seat andsteering column are returning to theprevious positions (entry/exit func-

tion).)

Page 180: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

MEMO

Pre-driving checks and adjustments 3-31

Page 181: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

3-32 Pre-driving checks and adjustments

MEMO

Page 182: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

4 Monitor, climate, audio, phone and voice recogni-tion systems

Infiniti InTouch Owner’s Manual........................... 4-2Ventilators ........................................................... 4-2Antenna............................................................... 4-3

Window antenna ............................................. 4-3

Satellite antenna ........................................... 4-3Car phone or CB radio ........................................ 4-3

Page 183: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

4-2 Monitor, climate, audio, phone and voice recognition systems

Refer to the Infiniti InTouch Owner’sManual that includes the following infor-mation.

. Infiniti InTouch

. Navigation system (if so equipped)

. Audio system

. Bluetooth® Hands-Free Phone system

. Heater and air conditioner

. Heated seats

. Heated steering wheel (if so equipped)

. Viewing information

. Other settings

. Voice recognition

. Monitor system

. Meter settings

. General system information

JVH0510X

Center ventilators

JVH0511X

Side ventilators

JVH0574X

Rear ventilatorsOpen or close, and adjust the air flowdirection of ventilators.

: This symbol indicates that the ventilators areclosed.

: This symbol indicates that the ventilators areopen.

INFINITI INTOUCH OWNER’S MANUAL VENTILATORS

Page 184: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WINDOW ANTENNAThe antenna pattern is printed inside therear window.

CAUTION

. Do not place metalized film near the rearwindow glass or attach any metal partsto it. This may cause poor reception ornoise.

. When cleaning the inside of the rearwindow, be careful not to scratch ordamage the rear window antenna.Lightly wipe along the antenna with adampened soft cloth.

SAA3602

SATELLITE ANTENNAThere is a satellite antenna on the rear partof the vehicle roof.

A buildup of ice on the satellite radioantenna can affect satellite radio perfor-mance. Remove the ice to restore satelliteradio reception.

When installing a car phone or a CB radioin your vehicle, be sure to observe thefollowing cautions, otherwise the newequipment may adversely affect the elec-tronic control modules and electronic con-trol system harness.

WARNING

. A cellular phone should not be used forany purpose while driving so full atten-tion may be given to vehicle operation.Some jurisdictions prohibit the use ofcellular phones while driving.

. If you must make a call while yourvehicle is in motion, the hands-freecellular phone operational mode (if soequipped) is highly recommended. Ex-ercise extreme caution at all times so fullattention may be given to vehicle opera-tion.

. If a conversation in a moving vehiclerequires you to take notes, pull off theroad to a safe location and stop yourvehicle before doing so.

Monitor, climate, audio, phone and voice recognition systems 4-3

ANTENNA CAR PHONE OR CB RADIO

Page 185: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

4-4 Monitor, climate, audio, phone and voice recognition systems

CAUTION

. Keep the antenna as far away aspossible from the electronic controlmodules.

. Keep the antenna wire more than 8 in(20 cm) away from the electronic controlsystem harness. Do not route the anten-na wire next to any harness.

. Adjust the antenna standing-wave ratioas recommended by the manufacturer.

. Connect the ground wire from the CBradio chassis to the body.

. For details, consult an INFINITI retailer.

Page 186: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5 Starting and driving

Precautions when starting and driving................. 5-3Exhaust gas (carbon monoxide)....................... 5-3Three-way catalyst........................................... 5-4Tire Pressure Monitoring System (TPMS).......... 5-4Avoiding collision and rollover......................... 5-8Off-road recovery............................................. 5-8Rapid air pressure loss ................................... 5-8Drinking alcohol/drugs and driving ................. 5-9Intelligent All-Wheel Drive (AWD) driving safetyprecautions (AWD models)............................. 5-10

Push-button ignition switch ............................... 5-10Operating range for hybrid systemstart function ................................................ 5-11Push-button ignition switch operation ........... 5-11Push-button ignition switch positions............ 5-12Emergency hybrid system shut off................. 5-12Intelligent Key battery discharge ................... 5-13

Before starting the INFINITI Direct ResponseHybrid® System................................................. 5-13Starting the INFINITI Direct ResponseHybrid® System................................................. 5-14Driving the vehicle............................................. 5-14

Automatic transmission ................................. 5-14Parking brake .................................................... 5-20INFINITI Drive Mode Selector.............................. 5-21

STANDARD mode.......................................... 5-21SPORT mode................................................ 5-21SNOW mode ................................................ 5-21ECO mode.................................................... 5-21PERSONAL mode.......................................... 5-23

Active Lane Control (if so equipped).................. 5-24Precautions on Active Lane Control .............. 5-25Active Lane Control operation ...................... 5-27Automatic deactivation................................. 5-29Lane camera unit maintenance .................... 5-29

Lane Departure Warning (LDW) system/LaneDeparture Prevention (LDP) system (ifso equipped)..................................................... 5-30

Lane Departure Warning (LDW) system......... 5-31Lane Departure Prevention (LDP) system...... 5-33System maintenance.................................... 5-36

Blind Spot Warning/Blind Spot InterventionTM/Back-up Collision Intervention systems (ifso equipped)..................................................... 5-37

Blind Spot Warning (BSW) system/Blind SpotInterventionTM (BSI) system.......................... 5-37BSW/BSI driving situations.......................... 5-43Back-up Collision Intervention(BCI) system ................................................ 5-48System maintenance.................................... 5-55

Page 187: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Cruise control (if so equipped)........................... 5-56Precautions on cruise control ........................ 5-56Cruise control operations .............................. 5-56

Intelligent Cruise Control (ICC) system (ifso equipped) ..................................................... 5-58

Selecting the vehicle-to-vehicle distancecontrol mode................................................. 5-59Vehicle-to-vehicle distance control mode ....... 5-59Precautions on vehicle-to-vehicle distancecontrol mode................................................. 5-60Vehicle-to-vehicle distance controlmode operation............................................. 5-61Conventional (fixed speed) cruisecontrol mode................................................. 5-74

Distance Control Assist (DCA) system (ifso equipped) ..................................................... 5-79

Precautions on DCA system........................... 5-79DCA system operation ................................... 5-81

Forward emergency braking system (ifso equipped) ..................................................... 5-89

System operation .......................................... 5-90Predictive forward collision warning system (ifso equipped) ..................................................... 5-94

System operation .......................................... 5-95Break-in schedule.............................................. 5-99Fuel Efficient Driving Tips................................... 5-99Increasing fuel economy .................................. 5-100Intelligent All-Wheel Drive (AWD) (ifso equipped) ................................................... 5-101

Parking/parking on hills.................................. 5-103Power steering ................................................ 5-104

Direct adaptive steering type ..................... 5-104Brake system .................................................. 5-106

Braking precautions................................... 5-106Parking brake break-in............................... 5-106

Brake assist .................................................... 5-107Brake assist............................................... 5-107Anti-lock Braking System (ABS).................. 5-107

Vehicle Dynamic Control (VDC) system ............ 5-108Rise-up and build-up ................................. 5-109Brake force distribution ............................. 5-109

Active trace control ......................................... 5-110Hill Start Assist system ................................... 5-112Chassis control ............................................... 5-112Cold weather driving ....................................... 5-113

Freeing a frozen door lock ......................... 5-113Antifreeze .................................................. 5-11312-volt Battery........................................... 5-113Draining of coolant water........................... 5-113Tire equipment .......................................... 5-113Special winter equipment .......................... 5-113Driving on snow or ice............................... 5-113Engine block heater (if so equipped).......... 5-114

Active noise control/Active sound control........ 5-115Active noise control ................................... 5-115Active sound control .................................. 5-115

Page 188: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

. Do not leave children or adults whowould normally require the support ofothers alone in your vehicle. Pets shouldnot be left alone either. They couldaccidentally injure themselves or othersthrough inadvertent operation of thevehicle. Also, on hot, sunny days,temperatures in a closed vehicle couldquickly become high enough to causesevere or possibly fatal injuries topeople or animals.

. Closely supervise children when they arearound cars to prevent them from play-ing and becoming locked in the trunkwhere they could be seriously injured.Keep the car locked, with the rearseatback and trunk lid securely latchedwhen not in use, and prevent children’saccess to car keys.

EXHAUST GAS (carbon monoxide)

WARNING

. Do not breathe exhaust gases; theycontain colorless and odorless carbonmonoxide. Carbon monoxide is danger-ous. It can cause unconsciousness ordeath.

. If you suspect that exhaust fumes areentering the vehicle, drive with allwindows fully open, and have thevehicle inspected immediately.

. Do not run the engine in closed spacessuch as a garage.

. Do not park the vehicle with the INFINITIDirect Response Hybrid® System run-ning for any extended length of time.

. Keep the trunk lid closed while driving,otherwise exhaust gases could be drawninto the passenger compartment. If youmust drive with the trunk lid open,follow these precautions:

1) Open all the windows.

2) Set the air recirculation mode to offand the fan control to high tocirculate the air.

. If electrical wiring or other cable con-nections must pass to a trailer throughthe seal on the trunk lid or the body,follow the manufacturer’s recommenda-tion to prevent carbon monoxide entryinto the vehicle.

. The exhaust system and body should beinspected by a qualified mechanic when-ever:

— The vehicle is raised for service.

— You suspect that exhaust fumes areentering into the passenger compart-ment.

— You notice a change in the sound ofthe exhaust system.

— You have had an accident involvingdamage to the exhaust system,underbody, or rear of the vehicle.

Starting and driving 5-3

PRECAUTIONS WHEN STARTING ANDDRIVING

Page 189: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-4 Starting and driving

THREE-WAY CATALYSTThe three-way catalyst is an emissioncontrol device installed in the exhaustsystem. Exhaust gases in the three-waycatalyst are burned at high temperatures tohelp reduce pollutants.

WARNING

. The exhaust gas and the exhaust systemare very hot. Keep people, animals orflammable materials away from theexhaust system components.

. Do not stop or park the vehicle overflammable materials such as dry grass,waste paper or rags. They may ignite andcause a fire.

CAUTION

. Do not use leaded gasoline. Depositsfrom leaded gasoline seriously reducethe three-way catalyst’s ability to helpreduce exhaust pollutants.

. Keep your engine tuned up. Malfunctionsin the ignition, fuel injection, or elec-trical systems can cause overrich fuel

flow into the three-way catalyst, causingit to overheat. Do not keep driving if theengine misfires, or if noticeable loss ofperformance or other unusual operatingconditions are detected. Have the vehicleinspected promptly by an INFINITI retai-ler.

. Avoid driving with an extremely low fuellevel. Running out of fuel could causethe engine to misfire, damaging thethree-way catalyst.

. Do not race the engine while warming itup.

. Do not push or tow your vehicle to startthe hybrid system.

TIRE PRESSURE MONITORING SYS-TEM (TPMS)Each tire, including the spare (if provided),should be checked monthly when cold andinflated to the inflation pressure recom-mended by the vehicle manufacturer on thevehicle placard or tire inflation pressurelabel. (If your vehicle has tires of a differentsize than the size indicated on the vehicleplacard or tire inflation pressure label, youshould determine the proper tire inflationpressure for those tires.)

As an added safety feature, your vehiclehas been equipped with a Tire PressureMonitoring System (TPMS) that illuminatesa low tire pressure telltale when one ormore of your tires is significantly under-inflated. Accordingly, when the low tirepressure telltale illuminates, you shouldstop and check your tires as soon aspossible, and inflate them to the properpressure. Driving on a significantly under-inflated tire causes the tire to overheat andcan lead to tire failure. Under-inflation alsoreduces fuel efficiency and tire tread life,and may affect the vehicle’s handling andstopping ability.

If the vehicle is being driven with one ormore flat tires, the low tire pressurewarning light will illuminate continuouslyand a chime will sound for 10 seconds. The“Flat Tire - Visit dealer” warning will alsoappear in the vehicle information display.The chime will only sound at the firstindication of a flat tire, and the warninglight will illuminate continuously. When theflat tire warning is activated, have thesystem reset and the tire checked andreplaced if necessary by an INFINITI retai-ler. Even if the tire is inflated to thespecified COLD tire pressure, the warning

Page 190: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

light will continue to illuminate until thesystem is reset by an INFINITI retailer. Yourvehicle can be driven for a limited time ona flat tire. See “Run-flat tires” (P.8-36).

Please note that the TPMS is not asubstitute for proper tire maintenance,and it is the driver’s responsibility tomaintain correct tire pressure, even ifunder-inflation has not reached the levelto trigger illumination of the TPMS low tirepressure telltale.

Your vehicle has also been equipped with aTPMS malfunction indicator to indicatewhen the system is not operating properly.The TPMS malfunction indicator is com-bined with the low tire pressure telltale.When the system detects a malfunction,the telltale will flash for approximately oneminute and then remain continuouslyilluminated. This sequence will continueupon subsequent vehicle start-ups as longas the malfunction exists. When the mal-function indicator is illuminated, the sys-tem may not be able to detect or signal lowtire pressure as intended. TPMS malfunc-tions may occur for a variety of reasons,including the installation of replacement oralternate tires or wheels on the vehicle thatprevent the TPMS from functioning prop-

erly. Always check the TPMS malfunctiontelltale after replacing one or more tires orwheels on your vehicle to ensure that thereplacement or alternate tires and wheelsallow the TPMS to continue to functionproperly.

Additional information. The TPMS will activate only when the

vehicle is driven at speeds above 16MPH (25 km/h). Also, this system maynot detect a sudden drop in tirepressure (for example a flat tire whiledriving).

. The low tire pressure warning light doesnot automatically turn off when the tirepressure is adjusted. After the tire isinflated to the recommended pressure,the vehicle must be driven at speedsabove 16 MPH (25 km/h) to activate theTPMS and turn off the low tire pressurewarning light. Use a tire pressure gaugeto check the tire pressure.

. The “Tire Pressure Low - Add Air”warning appears in the vehicle informa-tion display when the low tire pressurewarning light is illuminated and low tirepressure is detected. The “Tire PressureLow - Add Air” warning turns off whenthe low tire pressure warning light

turns off.The “Tire Pressure Low - Add Air”warning does not appear if the low tirepressure warning light illuminates toindicate a TPMS malfunction.

. The “Flat Tire - Visit dealer” warningappears in the vehicle information dis-play when the low tire pressure warn-ing light is illuminated and one or moreflat tires are detected.

. Tire pressure rises and falls dependingon the heat caused by the vehicle’soperation and the outside temperature.Low outside temperature can lower thetemperature of the air inside the tirewhich can cause a lower tire inflationpressure. This may cause the low tirepressure warning light to illuminate. Ifthe warning light illuminates in lowambient temperature, check the tirepressure for all four tires.

. You can also check the pressure of alltires in the vehicle information display.(See “Vehicle information display” (P.2-21).)

For additional information, see “Low tirepressure warning light” (P.2-15) and “TirePressure Monitoring System (TPMS)” (P.6-3).

Starting and driving 5-5

Page 191: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-6 Starting and driving

WARNING

. Radio waves could adversely affectelectric medical equipment. Those whouse a pacemaker should contact theelectric medical equipment manufacturerfor the possible influences before use.

. If the low tire pressure warning lightilluminates while driving, avoid suddensteering maneuvers or abrupt braking,reduce vehicle speed, pull off the road toa safe location and stop the vehicle assoon as possible. Driving with under-inflated tires may permanently damagethe tires and increase the likelihood oftire failure. Serious vehicle damagecould occur and may lead to an accidentand could result in serious personalinjury. Check the tire pressure for allfour tires. Adjust the tire pressure to therecommended COLD tire pressure shownon the Tire and Loading Informationlabel to turn the low tire pressurewarning light OFF. If the light stillilluminates while driving after adjustingthe tire pressure, a tire may be flat.

. Although you can continue driving with apunctured run-flat tire, remember that

vehicle handling stability is reduced,which could lead to an accident andpersonal injury. Also, driving a longdistance at high speeds may damagethe tires.

. Do not drive at speeds above 50 MPH(80 km/h) and do not drive more thanapproximately 93 miles (150 km) with apunctured run-flat tire. The actual dis-tance the vehicle can be driven on a flattire depends on outside temperature,vehicle load, road conditions and otherfactors.

. If you detect any unusual sounds orvibrations while driving with a puncturedrun-flat tire, pull off the road to a safelocation and stop the vehicle as soon aspossible. The tire may be seriouslydamaged and need to be replaced.

. When a wheel is replaced, the TPMS willnot function and the low tire pressurewarning light will flash for approxi-mately 1 minute. The light will remainon after 1 minute. Contact your INFINITIretailer as soon as possible for tirereplacement and/or system resetting.

. Replacing tires with those not originallyspecified by INFINITI could affect the

proper operation of the TPMS.

. Do not inject any tire liquid or aerosoltire sealant into the tires, as this maycause a malfunction of the tire pressuresensors.

CAUTION

. The TPMS may not function properlywhen the wheels are equipped with tirechains or the wheels are buried in snow.

. Do not place metalized film or any metalparts (antenna, etc.) on the windows.This may cause poor reception of thesignals from the tire pressure sensors,and the TPMS will not function properly.

Some devices and transmitters may tem-porarily interfere with the operation of theTPMS and cause the low tire pressurewarning light to illuminate. Some exam-ples are:

. Facilities or electric devices using simi-lar radio frequencies are near thevehicle.

. If a transmitter set to similar frequen-cies is being used in or near the

Page 192: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

vehicle.. If a computer (or similar equipment) or

a DC/AC converter is being used in ornear the vehicle.

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

1. This device may not cause harmfulinterference, and

2. This device must accept any interfer-ence received, including interferencethat may cause undesired operation.

NOTE:Changes or modification not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

For Canada:

This device complies with RSS-210 ofIndustry Canada. Operation is subject tothe following two conditions:

1. This device may not cause interference,and

2. This device must accept any interfer-ence, include interference that may

cause undesired operation of the de-vice.

TPMS with Tire Inflation IndicatorWhen adding air to an under-inflated tire,the TPMS with Tire Inflation Indicatorprovides visual and audible signals out-side the vehicle to help you inflate the tiresto the recommended COLD tire pressure.

Vehicle set-up:

1. Park the vehicle in a safe and levelplace.

2. Apply the parking brake and place theshift lever in the P (Park) position.

3. Place the ignition switch in the ONposition. Do not start the hybridsystem.

Operation:

1. Add air to the tire.

2. After a few seconds, the hazard indica-tors will start flashing.

3. When the designated pressure isreached, the horn beeps once and thehazard indicators stop flashing.

4. Perform the above steps for each tire.

. If the tire is over-inflated more thanapproximately 4 psi (30 kPa), the horn

beeps and the hazard indicators flash 3times. To correct the pressure, push thecore of the valve stem on the tire brieflyto release pressure. When the pressurereaches the designated pressure, thehorn beeps once.

. If the hazard indicator does not flashwithin approximately 15 seconds afterstarting to inflate the tire, it indicatesthat the Tire Inflation Indicator is notoperating.

. The TPMS will not activate the TireInflation Indicator under the followingconditions:— If there is interference from an

external device or transmitter— The air pressure from the inflation

device such as those using a powersocket is not sufficient to inflate thetire

— If an electrical equipment is beingused in or near the vehicle

— There is a malfunction in the TPMSsystem

— There is a malfunction in the horn orhazard indicators

. If the Tire Inflation Indicator does notoperate due to TPMS interference,move the vehicle about 3 ft (1 m)

Starting and driving 5-7

Page 193: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-8 Starting and driving

backward or forward and try again.If the Tire Inflation Indicator is not working,use a tire pressure gauge.

AVOIDING COLLISION AND ROLL-OVER

WARNING

Failure to operate this vehicle in a safe andprudent manner may result in loss of controlor an accident.

Be alert and drive defensively at all times.Obey all traffic regulations. Avoid exces-sive speed, high speed cornering, orsudden steering maneuvers, becausethese driving practices could cause you tolose control of your vehicle. As with anyvehicle, a loss of control could result in acollision with other vehicles or objects, orcause the vehicle to rollover, particularly ifthe loss of control causes the vehicle toslide sideways. Be attentive at all times,and avoid driving when tired. Never drivewhen under the influence of alcohol ordrugs (including prescription or over-the-counter drugs which may cause drowsi-ness). Always wear your seat belt as

outlined in the “Seat belts” (P.1-10) of thismanual, and also instruct your passengersto do so.

Seat belts help reduce the risk of injury incollisions and rollovers. In a rollover crash,an unbelted or improperly belted person issignificantly more likely to be injured orkilled than a person properly wearing aseat belt.

OFF-ROAD RECOVERYIf driving the right side or left side wheelsmay unintentionally leave the road surface.Maintain control of the vehicle by followingthe procedure below. Please note that thisprocedure is only a general guide. Thevehicle must be driven as appropriatebased on the conditions of the vehicle,road and traffic.

1. Remain calm and do not overreact.

2. Do not apply the brakes.

3. Maintain a firm grip on the steeringwheel with both hands and try to hold astraight course.

4. When appropriate, slowly release theaccelerator pedal to gradually slow thevehicle.

5. If there is nothing in the way, steer thevehicle to follow the road while thevehicle speed is reduced. Do notattempt to drive the vehicle back ontothe road surface until vehicle speed isreduced.

6. When it is safe to do so, gradually turnthe steering wheel until both tiresreturn to the road surface. When alltires are on the road surface, steer thevehicle to stay in the appropriatedriving lane.. If you decide that it is not safe to

return the vehicle to the road surfacebased on vehicle, road or trafficconditions, gradually slow the vehi-cle to a stop in a safe place off theroad.

RAPID AIR PRESSURE LOSSRapid air pressure loss or a “blow-out” canoccur if the tire is punctured or is damageddue to hitting a curb or pothole. Rapid airpressure loss can also be caused bydriving on under-inflated tires.

Rapid air pressure loss can affect thehandling and stability of the vehicle,especially at highway speeds.

Help prevent rapid air pressure loss by

Page 194: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

maintaining the correct air pressure andvisually inspect the tires for wear anddamage. See “Wheels and tires” (P.8-30) ofthis manual.

If a tire rapidly loses air pressure or“blows-out” while driving maintain controlof the vehicle by following the procedurebelow. Please note that this procedure isonly a general guide. The vehicle must bedriven as appropriate based on the condi-tions of the vehicle, road and traffic.

WARNING

The following actions can increase thechance of losing control of the vehicle ifthere is a sudden loss of tire air pressure.Losing control of the vehicle may cause acollision and result in personal injury.

. The vehicle generally moves or pulls inthe direction of the flat tire.

. Do not rapidly apply the brakes.

. Do not rapidly release the acceleratorpedal.

. Do not rapidly turn the steering wheel.

1. Remain calm and do not overreact.

2. Maintain a firm grip on the steeringwheel with both hands and try to hold astraight course.

3. When appropriate, slowly release theaccelerator pedal to gradually slow thevehicle.

4. Gradually steer the vehicle to a safelocation off the road and away fromtraffic if possible.

5. Lightly apply the brake pedal to gradu-ally stop the vehicle.

6. Turn on the hazard warning flashersand either contact a roadside emer-gency service to change the tire or see“Jacking up the vehicle and replacingtires” (P.8-40) of this Owner’s Manual.

DRINKING ALCOHOL/DRUGS ANDDRIVING

WARNING

Never drive under the influence of alcohol ordrugs. Alcohol in the bloodstream reducescoordination, delays reaction time and im-pairs judgement. Driving after drinkingalcohol increases the likelihood of beinginvolved in an accident injuring yourself and

others. Additionally, if you are injured in anaccident, alcohol can increase the severityof the injury.

INFINITI is committed to safe driving.However, you must choose not to driveunder the influence of alcohol. Every yearthousands of people are injured or killed inalcohol-related accidents. Although thelocal laws vary on what is considered tobe legally intoxicated, the fact is thatalcohol affects all people differently andmost people underestimate the effects ofalcohol.

Remember, drinking and driving don’t mix!And that is true for drugs, too (over-the-counter, prescription, and illegal drugs).Don’t drive if your ability to operate yourvehicle is impaired by alcohol, drugs, orsome other physical condition.

Starting and driving 5-9

Page 195: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-10 Starting and driving

INTELLIGENT ALL-WHEEL DRIVE(AWD) DRIVING SAFETY PRECAU-TIONS (AWD models)

WARNING

. Do not drive beyond the performancecapability of the tires, even with Intelli-gent AWD engaged. Accelerating quickly,sharp steering maneuvers or suddenbraking may cause loss of control.

. Always use tires of the same type, size,brand, construction (bias, bias-belted orradial), and tread pattern on all fourwheels. Install tire chains on the rearwheels when driving on slippery roadsand drive carefully.

. This vehicle is not designed for off-road(rough road) use. Do not drive on sandyor muddy roads that tires may get stuckin.

. For AWD equipped vehicles, do notattempt to raise two wheels off theground and shift the transmission toany D (Drive) or R (Reverse) position withthe hybrid system running. Doing somay result in drivetrain damage orunexpected vehicle movement which

could result in serious vehicle damageor personal injury.

. Do not attempt to test an AWD equippedvehicle on a 2-wheel dynamometer (suchas the dynamometers used by somestates for emissions testing), or similarequipment even if the other two wheelsare raised off the ground. Make sure youinform test facility personnel that yourvehicle is equipped with AWD before it isplaced on a dynamometer. Using thewrong test equipment may result indrivetrain damage or unexpected vehiclemovement which could result in seriousvehicle damage or personal injury.

. When a wheel is off the ground due to anunlevel surface, do not spin the wheelexcessively.

WARNING

Do not operate the push-button ignitionswitch while driving the vehicle except in anemergency. (The INFINITI Direct ResponseHybrid® System will stop when the ignitionswitch is pushed 3 consecutive times or theignition switch is pushed and held for morethan 2 seconds.) If the hybrid system turnsoff while the vehicle is being driven, thiscould lead to a crash and serious injury.

Before operating the push-button ignitionswitch, be sure to move the shift lever tothe P (Park) position.

PUSH-BUTTON IGNITION SWITCH

Page 196: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSD0659

OPERATING RANGE FOR HYBRIDSYSTEM START FUNCTIONThe Intelligent Key can only be used forstarting the hybrid system when theIntelligent Key is within the specifiedoperating range.

When the Intelligent Key battery is almostdischarged or strong radio waves arepresent near the operating location, theIntelligent Key system’s operating rangebecomes narrower and may not functionproperly.

If the Intelligent Key is within the operatingrange, it is possible for anyone, even

someone who does not carry the IntelligentKey, to push the ignition switch to start thehybrid system.

. The trunk area is not included in theoperating range but the Intelligent Keymay function.

. If the Intelligent Key is placed on theinstrument panel, rear parcel shelf,inside the glove box or door pocket,the Intelligent Key may not function.

. If the Intelligent Key is placed near thedoor or window outside the vehicle, theIntelligent Key may function.

CAUTION

When pressing the ignition to the OFFposition, make sure the button is notpressed twice. This may unintentionallyleave the vehicle in ACC or ON mode. Thismay discharge the 12-volt battery.

JVS0266X

PUSH-BUTTON IGNITION SWITCHOPERATIONWhen the ignition switch is pushed withoutdepressing the brake pedal, the ignitionswitch position will change as follows:

. Push center once to change to ACC.

. Push center two times to change to ON.

. Push center three times to change toOFF. (No position illuminates.)

. Push center four times to return to ACC.

. Open or close any door to return toLOCK during the OFF position.

If the ignition switch is pushed quickly or israpidly pushed twice, the hybrid system

Starting and driving 5-11

Page 197: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-12 Starting and driving

may not start. If this occurs, put the shiftlever in the “P” (Park) position, and leavethe ignition switch in the “OFF” position forone minute. Then depress the brake pedaland push the ignition switch to “ON”.When the READY to drive indicator light

illuminates, the vehicle can bedriven.

The ignition lock is designed so that theignition switch position cannot be switchedto LOCK until the shift lever is moved to theP (Park) positon.

When the ignition switch cannot beswitched toward the LOCK position, movethe shift lever into the P (Park) position.

PUSH-BUTTON IGNITION SWITCHPOSITIONS

LOCK (Normal parking position)The ignition switch can only be locked inthis position.

The ignition switch will be unlocked whenit is pushed to the ACC position whilecarrying the Intelligent Key.

ACC (Accessories)This position activates electrical acces-sories such as the radio, when the hybrid

system is not running.

ON (Normal operating position)This position turns on the ignition systemand electrical accessories.

OFFThe hybrid system can be turned off in thisposition.

The ignition lock is designed so that theignition switch cannot be switched to theLOCK position until the shift lever is movedto the P (Park) position.

CAUTION

Do not leave the vehicle with the push-button ignition switch in ACC or ON posi-tions when the hybrid system is not runningfor an extended period. This can dischargethe 12-volt battery.

EMERGENCY HYBRID SYSTEM SHUTOFFTo shut off the hybrid system in anemergency situation while driving, performthe following procedure:

. Rapidly push the push-button ignitionswitch 3 consecutive times, in less than1.5 seconds, or

. Push and hold the push-button ignitionswitch for more than 2 seconds.

Page 198: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0264X

INTELLIGENT KEY BATTERY DIS-CHARGEIf the battery of the Intelligent Key isdischarged, or environmental conditionsinterfere with the Intelligent Key operation,start the hybrid system according to thefollowing procedure:

1. Move the shift lever to the P (Park)position.

2. Firmly apply the foot brake.

3. Touch the ignition switch with theIntelligent Key as illustrated. (A chimewill sound.)

4. Push the ignition switch while depres-sing the brake pedal within 10 secondsafter the chime sounds. The hybridsystem will start.

After step 3 is performed, when theignition switch is pushed without depres-sing the brake pedal, the ignition switchposition will change to ACC.

NOTE:. When the ignition switch is pushed to

the ACC or ON position or the hybridsystem is started by the above proce-dures, the Intelligent Key battery dis-charge indicator appears in the vehicleinformation display even if the Intelli-gent Key is inside the vehicle. This isnot a malfunction. To turn off theIntelligent Key battery discharge indi-cator, touch the ignition switch withthe Intelligent Key again.

. If the Intelligent Key battery dischargeindicator appears, replace the batteryas soon as possible. (See “IntelligentKey battery replacement” (P.8-25).)

. Make sure the area around the vehicleis clear.

. Check fluid levels such as engine oil,coolant, brake fluid and windowwasher fluid as frequently as possible,or at least whenever you refuel.

. Check that all windows and lights areclean.

. Visually inspect tires for their appear-ance and condition. Also check tires forproper inflation.

. Lock all doors.

. Position seat and adjust head re-straints.

. Adjust inside and outside mirrors.

. Fasten seat belts and ask all passen-gers to do likewise.

. Check the operation of warning lightswhen the ignition switch is pushed tothe ON position. (See “Warning/indica-tor lights and audible reminders” (P.2-12).)

Starting and driving 5-13

BEFORE STARTING THE INFINITI DIRECTRESPONSE HYBRID® SYSTEM

Page 199: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-14 Starting and driving

1. Apply the parking brake.

2. Move the shift lever to P (Park) posi-tion.

The INFINITI Direct Response Hybrid®

System is designed not to operate ifthe shift lever is not in the P (Park)position.

3. Depress the brake pedal and push theignition switch to start the hybridsystem. The READY to drive indicatorlight will illuminate on the meter.

When starting the hybrid system atvery low outside temperatures, theREADY to drive indicator light will flashand it may take longer for the READY todrive indicator light to illuminate.

. The hybrid system may not start evenwith the READY to drive indicator lightilluminated. Once the READY to driveindicator light is illuminated you maybegin driving the vehicle.

. You may hear a sound in the enginecompartment when the brake pedal isdepressed with the hybrid system off.This does not indicate a problem.

NOTE:

Care should be taken to avoid situationsthat can lead to potential 12-volt battery

discharge and potential no-start condi-tions such as:1. Installation or extended use of electro-

nic accessories that consume 12-voltbattery power when the hybrid systemis not running (Phone chargers, GPS,DVD players, etc.)

2. Vehicle is not driven regularly and/oronly driven short distances.

In these cases, the 12-volt battery mayneed to be charged to maintain 12-voltbattery health.

AUTOMATIC TRANSMISSIONThe automatic transmission in your vehicleis electronically controlled by a transmis-sion control module to produce maximumefficiency and smooth operation.

Shown on the following pages are therecommended operating procedures forthis transmission. Follow these proceduresfor maximum vehicle performance anddriving enjoyment.

Starting the vehicleAfter starting the INFINITI Direct ResponseHybrid® System, fully depress the footbrake pedal and push the shift lever buttonbefore shifting the shift lever to the R(Reverse), N (Neutral), D (Drive) or Manualshift mode position. Be sure the vehicle isfully stopped before attempting to shift theshift lever.

This Automatic Transmission (AT) model isdesigned so that the foot brake pedalmust be depressed before shifting from P(Park) to any drive position while theignition switch is in the ON position.

The shift lever cannot be moved out of theP (Park) position and into any of the othergear positions if the ignition switch ispushed to the LOCK, OFF or ACC position.

STARTING THE INFINITI DIRECT RESPONSEHYBRID® SYSTEM DRIVING THE VEHICLE

Page 200: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1. Keep the foot brake pedal depressedand push the shift lever button to shiftinto a driving gear.

2. Release the parking brake and footbrake, then gradually start the vehiclein motion.

WARNING

. Do not depress the accelerator pedalwhile shifting from P (Park) or N(Neutral) to R (Reverse), D (Drive) ormanual shift mode. Always depress thebrake pedal until shifting is completed.Failure to do so could cause you to losecontrol and have an accident.

. Cold engine idle speed is high, so usecaution when shifting into a forward orreverse gear before the engine haswarmed up.

. Never shift to P (Park) or R (Reverse)while vehicle is moving forward. Nevershift to P (Park) or D (Drive) while vehicleis moving rearward. Failure to do socould cause you to lose control and havean accident.

CAUTION

. When stopping the vehicle on an uphillgrade, do not hold the vehicle bydepressing the accelerator pedal. Thefoot brake should be used for thispurpose.

. Do not downshift abruptly on slipperyroads. This may cause a loss of control.

. Except in an emergency, do not shift tothe N (Neutral) position while driving.Coasting with the transmission in the N(Neutral) position may cause seriousdamage to the transmission.

JVS0186X

Shift leverTo move the shift lever,

: Push the button while depressing thebrake pedal,

: Push the button,

: Just move the shift lever.

ShiftingAfter starting the hybrid system, fullydepress the brake pedal and shift the shiftlever from P (Park) to R (Reverse), N(Neutral), D (Drive) or Manual shift modeposition.

Push the button to shift into P (Park) or R(Reverse). All other positions can beselected without pushing the button.

Starting and driving 5-15

Page 201: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-16 Starting and driving

WARNING

Apply the parking brake if the shift lever isin any position while the hybrid system isnot running. Failure to do so could cause thevehicle to move unexpectedly or roll awayand result in serious personal injury orproperty damage.

CAUTION

Make sure the vehicle is completely stoppedand the transmission is in the P (Park)position.

P (Park) position:

Use this position when the vehicle isparked or when starting the hybrid system.Make sure the vehicle is completelystopped. The brake pedal must be de-pressed and the shift lever button pushedin to move the shift lever from the N(Neutral) position or any drive position tothe P (Park) position. Apply the parkingbrake. When parking on a hill, apply theparking brake first, then move the shift

lever to the P (Park) position.

CAUTION

Use this position only when the vehicle iscompletely stopped.

R (Reverse):

Use this position to back up. Always besure the vehicle is completely stoppedbefore selecting the R (Reverse) position.The brake pedal must be depressed andthe shift lever button pushed in to movethe shift lever from the P (Park) position,the N (Neutral) position or any driveposition to the R (Reverse) position.

N (Neutral):

Neither forward nor reverse gear is en-gaged. The hybrid system can be started inthis position. You may shift to the N(Neutral) position and restart a stalledhybrid system while the vehicle is moving.

D (Drive):

Use this position for all normal forwarddriving.

JVS0187X

Paddle shifters (if so equipped)

Manual shift modeWhen the shift lever is in the manual shiftgate, the transmission is ready for themanual shift mode. Shift ranges can beselected manually by moving the shift leverup or down, or pulling the right-side or left-side paddle shifter (if so equipped).

When shifting up, move the shift lever tothe + (up) side or pull the right-side paddleshifter (+) *A (if so equipped). Thetransmission shifts to the higher range.

When shifting down, move the shift lever tothe − (down) side or pull the left-sidepaddle shifter (−) *B (if so equipped). The

Page 202: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

transmission shifts to the lower range.

When canceling the manual shift mode,return the shift lever to the D (Drive)position. The transmission returns to thenormal driving mode.

When you pull the paddle shifter (if soequipped) while in the D (Drive) position,the transmission will shift to the upper orlower range temporarily. The transmissionwill automatically return to the D (Drive)position after a short period of time. If youwant to return to the D (Drive) positionmanually, pull and hold the paddle shifterfor about 1.5 seconds.

In the manual shift mode, the shift range isdisplayed in the vehicle information dis-play.

Shift ranges up or down one by one asfollows:

1M ?/ 2M ?

/ 3M ?/ 4M ?

/ 5M ?/ 6M ?

/7M

7M (7th):

Use this position for all normal forwarddriving at highway speeds.

6M (6th) and 5M (5th):

Use these positions when driving up longslopes, or for engine braking when driving

down long slopes.

4M (4th), 3M (3rd) and 2M (2nd):

Use these positions for hill climbing orengine braking on downhill grades.

1M (1st):

Use this position when climbing steep hillsslowly or driving slowly through deepsnow, or for maximum engine braking onsteep downhill grades.

. Remember not to drive at high speedsfor extended periods of time in lowerthan 7th gear. This reduces fuel econ-omy.

. Moving the shift lever rapidly to thesame side twice will shift the ranges insuccession.

. In the manual shift mode, the transmis-sion may not shift to the selected gearor may automatically shift to the othergear. This helps maintain driving per-formance and reduces the chance ofvehicle damage or loss of control.

. When the transmission does not shiftto the selected gear, the AutomaticTransmission (AT) position indicator (inthe vehicle information display) willblink and the buzzer will sound.

. In the manual shift mode, the transmis-sion automatically shifts down to 1stgear before the vehicle comes to astop. When accelerating again, it isnecessary to shift up to the desiredrange.

Accelerator downshift — In D (Drive)position —

For passing or hill climbing, fully depressthe accelerator pedal to the floor. Thisshifts the transmission down into the lowergear, depending on the vehicle speed.

Fail-safeWhen the fail-safe operation occurs, notethat the transmission will be locked in anyof the forward gears according to thecondition.

If the vehicle is driven under extremeconditions, such as excessive wheel spin-ning and subsequent hard braking, thefail-safe system may be activated. This willoccur even if all electrical circuits arefunctioning properly. In this case, pushthe ignition switch to the OFF position andwait for 3 seconds. Then push the ignitionswitch back to the ON position. The vehicleshould return to its normal operatingcondition. If it does not return to its

Starting and driving 5-17

Page 203: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-18 Starting and driving

normal operating condition, have anINFINITI retailer check the transmissionand repair if necessary.

JVS0188X

Shift lock releaseIf the 12-volt battery charge is low ordischarged, the shift lever may not bemoved from the P (Park) position even withthe brake pedal depressed and the shiftlever button pushed.

To move the shift lever, perform thefollowing procedure:

1. Push the ignition switch to the OFF orLOCK position.

2. Apply the parking brake.

3. Remove the shift lock cover *A using asuitable tool.

4. Push down the shift lock *B usingmechanical key as illustrated.

5. Push the shift lever button *C andmove the shift lever to N (Neutral)position *D while holding down theshift lock.

If the lever cannot be moved out of P(Park), have an INFINITI retailer check theautomatic transmission system as soon aspossible.

Adaptive Shift Control (ASC)The adaptive shift control system automa-tically operates when the transmission isin the D (Drive) position and selects anappropriate gear depending on the roadconditions such as uphill, downhill orcurving roads.

Control on uphill and curving roads:

A low gear is maintained that suits thedegree of the slope or curve to allowsmooth driving with a small number ofshifts.

Control on downhill roads:

The adaptive shift control system shifts toa low gear that suits the degree of theslope to reduce the number of times thatthe brake must be used.

Page 204: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Control on winding roads:

A low gear is maintained on continuouscurves that involve repeated accelerationand deceleration, so that smooth accelera-tion is available instantly when the accel-erator pedal is depressed.

NOTE:. Adaptive shift control may not operate

when the transmission oil temperatureis low immediately after the start ofdriving or when it is very hot.

. During some driving situations, hardbraking for example, the adaptive shiftcontrol may automatically operate. Thetransmission may automatically shiftto a lower gear for re-acceleration. Thisincreases engine speed but not vehiclespeed. Vehicle speed is controlled bythe accelerator pedal when the vehicleis in the Adaptive shift control mode.

. When the adaptive shift control oper-ates, the transmission sometimesmaintains a lower gear for a longerperiod of time than when adaptive shiftcontrol is not operating. Engine speedwill be higher for a specific vehiclespeed while ASC system is operatingthan when ASC is not operating.

NAVI Shift Control (if so equipped)NAVI Shift Control automatically adjuststhe Automatic Transmission (AT) gear posi-tion in certain situations based on roadinformation from the navigation system.

When the navigation system detects thatthe vehicle is approaching a curved road,NAVI Shift Control will adjust the gearposition if needed to help the driver runthrough the curve smoothly.

Precaution on NAVI Shift Control:

. The NAVI Shift Control does not providesteering input or automated driving ona curve. It is not a speed limit supportsystem and will not modify your speedaccording to local speed limits.

. The NAVI Shift Control is a convenientsystem intended to help the vehiclemove through a curve smoothly. How-ever, the driver must always drivesafely and use the brake pedal ifneeded.

. The NAVI Shift Control may be delayedor not operate properly in the followingsituations, because this function usesthe road information provided by thenavigation system.

— When the navigation system cannotaccurately detect the location of thevehicle.

— When the vehicle is driving on aroadway that is not recognized bythe navigation system.

— When the actual roadway differsfrom the map information on thenavigation system due to road con-struction, traffic lane obstructions,etc.

. The NAVI Shift Control may not operateproperly in the following situations:— If the vehicle’s transmission, engine,

hybrid system and/or navigationsystem, and/or GPS is malfunction-ing.

— If the vehicle speed is higher than74 MPH (120 km/h) or lower than37 MPH (60 km/h) and/or transmis-sion gear is outside the operatingrange of the system.

— When the vehicle is driving on afreeway.

— When the vehicle is driving on agentle curve

— When the vehicle is driving with theshift lever except in the D (Drive)position.

Starting and driving 5-19

Page 205: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-20 Starting and driving

JVS0246X

How to enable/disable the NAVI ShiftControl:

Perform the following steps to enable ordisable the NAVI Shift Control.

1. Push the MENU button *1 and touch[Settings] on the lower display.

2. Touch [Drive Mode Enhancement].

3. Touch [Navi Shift Control] and select theON (enabled) or OFF (disabled).

WARNING

. Be sure the parking brake is fullyreleased before driving. Failure to do socan cause brake failure and lead to anaccident.

. Do not release the parking brake fromoutside the vehicle.

. Do not use the gear shift in place of theparking brake. When parking, be surethe parking brake is fully engaged.

. Do not leave children unattended in avehicle. They could release the parkingbrake and cause an accident.

SPA2331

To apply: Fully depress the parking brakepedal *1 .

To release:

1. Firmly apply the foot brake *2 .

2. Depress the parking brake pedal *1and the parking brake will be released.

3. Before driving, be sure the brakewarning light goes out.

PARKING BRAKE

Page 206: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0189X

INFINITI Drive Mode Selector

JVS0191M

Five driving modes can be selected byusing the INFINITI Drive Mode Selector(PERSONAL, SPORT, STANDARD, ECO andSNOW).

NOTE:

When the INFINITI Drive Mode Selectorselects a mode, the mode may not switchimmediately. This is not a malfunction.

The current mode is displayed in thevehicle information display.

To change the mode, push the INFINITIDrive Mode Selector up or down. The modelist will appear on the upper display andyou can select the mode.

PERSONAL Û SPORT Û STANDARD Û ECOÛ SNOW

NOTE:

The mode list will be turned off inapproximately 5 seconds after the modeis selected.

STANDARD MODEAllows for optimum driving according tothe driving conditions.

This mode will be selected first each timethe INFINITI Direct Response Hybrid® Sys-tem is started.

SPORT MODEAdjusts the engine and transmissionpoints for a higher response. The settingof the steering system is adjusted toprovide a quick steering response and aheavy steering effort.

NOTE:

In the SPORT mode, fuel economy may bereduced.

SNOW MODEChanges the engine characteristics to aiddriving on slippery roads.

ECO MODEAssists the driver’s eco-driving. The engineand transmission points are adjusted forimproved fuel economy, providing such adriving features as smooth starting orconstant cruising.

NOTE:

Selecting the ECO mode will not necessa-rily improve fuel economy as many drivingfactors influence its effectiveness.

OperationSelect the ECO mode using the INFINITIDrive Mode Selector. The ECO drive indi-cator light on the instrument panel illumi-

Starting and driving 5-21

INFINITI DRIVE MODE SELECTOR

Page 207: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-22 Starting and driving

nates.

When the accelerator pedal is depressedwithin the range of economy drive, the ECOdrive indicator light illuminates in green.When the accelerator pedal is depressedabove the range of economy drive, the ECOdrive indicator light turns off. For ECOpedal system equipped models, see “ECOpedal system” (P.5-22).

The ECO drive indicator light will notilluminate in the following cases:

. When the shift lever is in the R (Reverse)position.

. When the vehicle speed is below 4 MPH(6 km/h) or over 90 MPH (144 km/h).

. When the Intelligent Cruise Control (ICC)system (if so equipped) is operated.

ECO pedal system (if so equipped)The ECO pedal system helps assist thedriver to improve fuel economy by increas-ing the reaction force of the acceleratorpedal. When the ECO drive indicator light isblinking or remains off, the ECO pedalsystem increases the reaction force of theaccelerator pedal.

JVS0303X

When the ECO drive indicator illuminates ingreen, the accelerator reaction force isnormal. When the ECO drive indicator lightis blinking or remains off, the ECO pedalsystem increases the reaction force of theaccelerator pedal.

The ECO pedal system may not varyaccelerator reaction force under the follow-ing conditions:

. When the shift lever is in the N (Neutral)or R (Reverse) position.

. When Intelligent Cruise Control (ICC) isbeing operated.

If the ECO pedal system malfunctions, itwill cancel automatically. The ECO pedal

system will not vary the reaction force ofthe accelerator pedal.

When the INFINITI Drive Mode Selector isrotated from the ECO mode to anothermode (STANDARD, SPORT, SNOW or PER-SONAL) while the ECO pedal system isoperating, the ECO pedal system continuesto operate until the accelerator pedal isreleased.

If the accelerator pedal is depressedquickly, the ECO pedal system will notincrease the reaction force of the accelera-tion pedal. The ECO pedal system is notdesigned to prevent the vehicle fromaccelerating.

Adjusting the ECO pedal system reactionforce:

The ECO pedal system reaction force canbe adjusted. The reaction force setting willbe maintained until the setting is changedeven if the hybrid system is turned off.

Page 208: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0246X

Setting ECO pedal reaction force:

1. Push the MENU button *1 and touch[Settings] on the lower display.

2. Touch [Drive Mode Enhancement].

3. Touch [ECO Pedal].

4. To set the reaction force of the ECOpedal system, touch [Standard] or[Soft].

5. To turn off the ECO pedal system, touch[OFF].

When the ECO pedal system is turned off,the accelerator will operate normally.

PERSONAL MODEWhen the PERSONAL mode is selected, thefollowing functions can be adjusted indivi-dually.

. Engine·Transmission

. Steering

. Active Trace Control

JVS0246X

How to set the PERSONAL modePerform the following steps to set thePERSONAL mode.

1. Push the MENU button *1 and touch[Infiniti Drive Mode Selector] on thelower display.

2. Touch [Engine·Transmission], [Steering]or [Active Trace Control] and select eachitem. (See “Engine·Transmission”,“Steering” and “Active Trace Control”about the feature of each item.)

3. Touch [Back] or [Home] to finish thePERSONAL mode setting.

Starting and driving 5-23

Page 209: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-24 Starting and driving

Engine·Transmission:

“Engine·Transmission” can be set to[Sport], [Eco], [Standard] or [Snow].

Steering:

Four combinations of steering effort andsteering response can be set.

Steering effort Steering response

Standard Standard

Standard Quick

Heavy Quick

Light Casual

Active Trace Control:

“Active Trace Control” can be set to ON(enabled) or OFF (disabled).

For details about the Active Trace Control,see “Active trace control” (P.5-110).

Active Lane Control enables the driver tomake fewer steering corrections on free-ways.

JVS0231X

Active Lane Control slightly corrects fronttire angles and steering wheel torque tohelp reduce the difference between thevehicle’s direction and the lane direction*2 which is detected by using the cameraunit *1 located above the inside mirror.

ACTIVE LANE CONTROL (if so equipped)

Page 210: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0251X

PRECAUTIONS ON ACTIVE LANECONTROL

WARNING

. Active Lane Control will not always steerthe vehicle to keep it in the lane. It is notdesigned to prevent loss of control. It isthe driver’s responsibility to stay alert,drive safely, keep the vehicle in thetraveling lane, and be in control ofvehicle at all times.

. Active Lane Control is primarily intendedfor use on well-developed freeways orhighways. It may not detect the lanemarkers for certain roads, weather ordriving conditions.

. Using Active Lane Control under someconditions of road, lane marker orweather, or if you attempt to changelanes without using the lane changesignal could lead to an unexpectedsystem operation. In such conditions,you need to correct the vehicle’s direc-tion with your steering operation toavoid accidents.

. When Active Lane Control is operating,avoid excessive or sudden steering

Starting and driving 5-25

Page 211: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-26 Starting and driving

maneuvers. Otherwise, you could losecontrol of the vehicle.

. Active Lane Control will not operate atspeeds below approximately 45 MPH (70km/h) or if it cannot detect lane markers.

. Active Lane Control may not operateproperly under the following conditions,and do not use Active Lane Control:

— During bad weather (rain, fog, snow,wind, etc.).

— When driving on slippery roads,such as on ice or snow, etc.

— When driving on winding or unevenroads.

— When there is a lane closure due toroad repairs.

— When driving in a makeshift lane.

— When driving on roads where thelane width is too narrow.

— When driving with a tire that is notwithin normal tire conditions (forexample, tire wear, low tire pressure,installation of tire chains, non-stan-dard wheels).

— When the vehicle is equipped withnon-original steering parts or sus-

pension parts.

. If Active Lane Control malfunctions, itwill cancel automatically. The chassiscontrol warning will appear in thevehicle information display.

. If the chassis control warning appears,pull off the road to a safe location andstop the vehicle. Turn the INFINITI DirectResponse Hybrid® System off and re-start the hybrid system. If the chassiscontrol warning continues to illuminate,have Active Lane Control checked by anINFINITI retailer.

The functions of Active Lane Control may ormay not operate properly under the follow-ing conditions:

. On roads where there are multipleparallel lane markers; lane markersthat are faded or not painted clearly;yellow painted lane markers; non-stan-dard lane markers; lane markers cov-ered with water, dirt, snow, etc.

. On roads where discontinued lanemarkers are still detectable.

. On roads where there are sharp curves.

. On roads where there are sharplycontrasting objects, such as shadows,

snow, water, wheel ruts, seams or linesremaining after road repairs. (ActiveLane Control could detect these itemsas lane markers.)

. On roads where the traveling lanemerges or separates.

. When the vehicle’s traveling directiondoes not align with the lane marker.

. When traveling close to the vehicle infront of you, which obstructs the lanecamera unit detection range.

. When rain, snow or dirt adheres to thewindshield in front of the lane cameraunit.

. When the headlights are not bright dueto dirt on the lens or if the aiming is notadjusted properly.

. When strong light enters the lanecamera unit. (For example, the lightdirectly shines on the front of thevehicle at sunrise or sunset.)

. When a sudden change in brightnessoccurs. (For example, when the vehicleenters or exits a tunnel or under abridge.)

. When entering or exiting tollgates.

. When driving on roads with a wideningor narrowing lane width.

Page 212: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

ACTIVE LANE CONTROL OPERATIONActive Lane Control operates under thefollowing conditions:

. When the vehicle is driven at speeds ofapproximately 45 MPH (70 km/h) andabove.

. When the Lane Departure Prevention(LDP) system is enabled in the settingsmenu on the lower display. To turn onthe LDP system, see “Lane DeparturePrevention (LDP) system” (P.5-33).

. When Active Lane Control is enabled inthe settings menu on the lower display. JVS0206X

Dynamic driver assistance switchActive Lane Control turns on when thedynamic driver assistance switch on thesteering wheel is pushed and [Active lanecontrol] and [Lane Departure Prevention]are enabled in the settings menu on thelower display. See “How to enable/disablethe LDP system” (P.5-35).

Starting and driving 5-27

Page 213: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-28 Starting and driving

JVS0248X

The status of Active Lane Control in thevehicle information display is displayed asfollows.

. When Active Lane Control is turned on,the chassis control *A is displayed.

. When Active Lane Control is operationalor is operating, the chassis control *Bis displayed.

For setting of chassis control display in thevehicle information display, see InfinitiInTouch Owner’s Manual.

JVS0246X

Active Lane Control settingsPerform the following steps to set ActiveLane Control.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Lane Assist].

3. Touch [Active lane control].

4. Touch [Active lane control setting] andselect [Low] or [High] to change thesetting of Active Lane Control.

Page 214: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

NOTE:

If the Lane Departure Prevention (LDP)system setting is OFF, Active Lane Controlcannot be operated. To use Active LaneControl, set the LDP system to ON.

AUTOMATIC DEACTIVATIONActive Lane Control is not designed tooperate under the following conditions:

. When the Vehicle Dynamic Control(VDC) system (except TCS function) orABS operates.

. When you operate the lane changesignal and change the traveling lanesin the direction of the signal. (ActiveLane Control is deactivated for approxi-mately 2 seconds after the lane changesignal is turned off.)

. When the vehicle speed lowers to lessthan approximately 45 MPH (70 km/h).

. When the hazard warning flashers areoperated.

After the above conditions have finishedand the operating conditions are satisfiedagain, Active Lane Control will resumeoperation.

Temporary disabled status at hightemperatureIf the vehicle is parked in direct sunlightunder high temperature conditions (overapproximately 1048F (408C)) and thenActive Lane Control is turned on, ActiveLane Control may be deactivated automa-tically. The high cabin temperature mes-sage will appear in the vehicle informationdisplay.

Action to take:

When the above conditions no longer exist,push the dynamic driver assistance switchagain to turn Active Lane Control back on.

SSD0453

LANE CAMERA UNIT MAINTENANCEThe lane camera unit *1 for Active LaneControl is located above the inside mirror.To keep the proper operation of Active LaneControl and prevent a system malfunction,be sure to observe the following:

. Always keep the windshield clean.

. Do not attach a sticker (includingtransparent material) or install anaccessory near the camera unit.

. Do not place reflective materials, suchas white paper or a mirror, on theinstrument panel. The reflection ofsunlight may adversely affect the cam-

Starting and driving 5-29

Page 215: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-30 Starting and driving

era unit’s capability of detecting thelane markers.

. Do not strike or damage the areasaround the camera unit. Do not touchthe camera lens or remove the screwlocated on the camera unit. If thecamera unit is damaged due to anaccident, contact an INFINITI retailer.

The Lane Departure Warning (LDW) sys-tem/Lane Departure Prevention (LDP) sys-tem will operate when the vehicle is drivenat speeds of approximately 45 MPH (70km/h) and above, and when it is travelingclose to either the left or the right of atraveling lane.

Each system functions as follows:

. Lane Departure Warning (LDW) system— warns the driver by the warning inthe vehicle information display andchime that the vehicle is beginning toleave the driving lane.

. Lane Departure Prevention (LDP) system— warns the driver by the warning inthe vehicle information display andchime, and helps assist the driver toreturn the vehicle to the center direc-tion of the traveling lane by operatingthe steering system to the right or left(for a short period of time).

JVS0231X

JVS0308X

Driver assist system lane indicator

LANE DEPARTURE WARNING (LDW)SYSTEM/LANE DEPARTURE PREVENTION(LDP) SYSTEM (if so equipped)

Page 216: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The LDW and LDP systems monitor the lanemarkers on the traveling lane using thecamera unit *1 located above the insidemirror. When the camera unit detects thatthe vehicle is traveling close to either theleft or the right of the traveling lane, thedriver assist system lane indicator (orange)in the vehicle information display blinksand a warning chime sounds. When theLDP system is on, it will automaticallyapply a steering operation for a shortperiod of time.

LANE DEPARTURE WARNING (LDW)SYSTEM

Precautions on LDW system

WARNING

. This system is only a warning device toinform the driver of a potential unin-tended lane departure. It will not steerthe vehicle or prevent loss of control. Itis the driver’s responsibility to stayalert, drive safely, keep the vehicle inthe traveling lane, and be in control ofthe vehicle at all times.

. The system will not operate at speeds

below approximately 45 MPH (70 km/h)or if it cannot detect lane markers.

. If the LDW system malfunctions, it willcancel automatically, and the LDW mal-function message will appear in thevehicle information display.

. If the LDW malfunction message ap-pears, pull off the road to a safe locationand stop the vehicle. Turn the INFINITIDirect Response Hybrid® System off andrestart the hybrid system. If the LDWmalfunction message continues to ap-pear, have the system checked by anINFINITI retailer.

. Excessive noise will interfere with thewarning chime sound, and the chimemay not be heard.

The system may not function properlyunder the following conditions:

. On roads where there are multipleparallel lane markers; lane markersthat are faded or not painted clearly;yellow painted lane markers; non-stan-dard lane markers; or lane markerscovered with water, dirt, snow, etc.

. On roads where the discontinued lanemarkers are still detectable.

. On roads where there are sharp curves.

. On roads where there are sharplycontrasting objects, such as shadows,snow, water, wheel ruts, seams or linesremaining after road repairs. (The LaneDeparture Warning (LDW) system coulddetect these items as lane markers.)

. On roads where the traveling lanemerges or separates.

. When the vehicle’s traveling directiondoes not align with the lane marker.

. When traveling close to the vehicle infront of you, which obstructs the lanecamera unit detection range.

. When rain, snow or dirt adheres to thewindshield in front of the lane cameraunit.

. When the headlights are not bright dueto dirt on the lens or if the aiming is notadjusted properly.

. When strong light enters the lanecamera unit. (For example, the lightdirectly shines on the front of thevehicle at sunrise or sunset.)

. When a sudden change in brightnessoccurs. (For example, when the vehicleenters or exits a tunnel or under abridge.)

Starting and driving 5-31

Page 217: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-32 Starting and driving

JVS0308X

Driver assist system lane indicator

LDW system operationThe LDW system provides a lane departurewarning function when the vehicle is drivenat speeds of approximately 45 MPH (70km/h) and above. When the vehicleapproaches either the left or the right sideof the traveling lane, a warning chime willsound and the driver assist system laneindicator (orange) in the vehicle informa-tion display will blink to alert the driver.

The warning function will stop when thevehicle returns inside of the lane markers.

The LDW system is not designed to warnunder the following conditions.

. When you operate the lane changesignal and change traveling lanes inthe direction of the signal. (The LDWsystem will become operable againapproximately 2 seconds after the lanechange signal is turned off.)

. When the vehicle speed lowers to lessthan approximately 45 MPH (70 km/h).

. When the Blind Spot InterventionTM

(BSI) system activates an audible warn-ing or steering control.

After the above conditions have finishedand the necessary operating conditions aresatisfied, the LDW functions will resume.

Temporary disabled status at hightemperatureIf the vehicle is parked in direct sunlightunder high temperature conditions (overapproximately 1048F (408C) and thenstarted, the LDW system may be deacti-vated automatically. The high cabin tem-perature warning message will appear inthe vehicle information display.

When the interior temperature is reduced,the LDW system will resume operatingautomatically.

JVS0246X

Turning the LDW system ON/OFFPerform the following steps to turn theLDW system on or off.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Lane Assist].

3. Touch [Lane Departure Warning] to turnthe system ON/OFF.

Page 218: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

LANE DEPARTURE PREVENTION(LDP) SYSTEM

Precautions on LDP system

WARNING

. The LDP system will not always steer thevehicle to keep it in the lane. It is notdesigned to prevent loss of control. It isthe driver’s responsibility to stay alert,drive safely, keep the vehicle in thetraveling lane, and be in control ofvehicle at all times.

. The LDP system is primarily intended foruse on well-developed freeways or high-ways. It may not detect the lane markersin certain roads, weather or drivingconditions.

. Using the LDP system under someconditions of road, lane marker orweather, or when you change laneswithout using the lane change signalcould lead to an unexpected systemoperation. In such conditions, you needto correct the vehicle’s direction withyour steering operation to avoid acci-dents.

. When the LDP system is operating, avoidexcessive or sudden steering maneu-vers. Otherwise, you could lose controlof the vehicle.

. The LDP system will not operate atspeeds below approximately 45 MPH(70 km/h) or if it cannot detect lanemarkers.

. The LDP system may not functionproperly under the following conditions,and do not use the LDP system:

— During bad weather (rain, fog, snow,wind, etc.).

— When driving on slippery roads,such as on ice or snow, etc.

— When driving on winding or unevenroads.

— When there is a lane closure due toroad repairs.

— When driving in a makeshift lane.

— When driving on roads where thelane width is too narrow.

— When driving with a tire that is notwithin normal tire conditions (forexample, tire wear, low tire pressure,installation of tire chains, non-stan-

dard wheels).

— When the vehicle is equipped withnon-original steering parts or sus-pension parts.

. If the LDP system malfunctions, it willcancel automatically. The LDP “malfunc-tion” message will appear in the vehicleinformation display.

. If the “malfunction” message appears,pull off the road to a safe location andstop the vehicle. Turn the hybrid systemoff and restart the hybrid system. If the“malfunction” message continues toappear, have the LDP system checkedby an INFINITI retailer.

. Excessive noise will interfere with thewarning chime sound, and the chimemay not be heard.

The functions of the LDP system (warningand steering control assist) may or may notoperate properly under the following con-ditions:

. On roads where there are multipleparallel lane markers; lane markersthat are faded or not painted clearly;yellow painted lane markers; non-stan-dard lane markers; lane markers cov-

Starting and driving 5-33

Page 219: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-34 Starting and driving

ered with water, dirt, snow, etc.. On roads where discontinued lane

markers are still detectable.. On roads where there are sharp curves.. On roads where there are sharply

contrasting objects, such as shadows,snow, water, wheel ruts, seams or linesremaining after road repairs. (The LDPsystem could detect these items aslane markers.)

. On roads where the traveling lanemerges or separates.

. When the vehicle’s traveling directiondoes not align with the lane marker.

. When traveling close to the vehicle infront of you, which obstructs the lanecamera unit detection range.

. When rain, snow or dirt adheres to thewindshield in front of the lane cameraunit.

. When the headlights are not bright dueto dirt on the lens or if the aiming is notadjusted properly.

. When strong light enters the lanecamera unit. (For example, the lightdirectly shines on the front of thevehicle at sunrise or sunset.)

. When a sudden change in brightnessoccurs. (For example, when the vehicleenters or exits a tunnel or under abridge.)

JVS0308X

Driver assist system lane indicator

LDP system operationThe LDP system provides a lane departurewarning and steering control assistancewhen the vehicle is driven at speeds ofapproximately 45 MPH (70 km/h) andabove. When the vehicle approaches eitherthe left or the right side of the travelinglane, a warning chime will sound and thedriver assist system lane indicator (orange)will blink to alert the driver. Then, the LDPsystem will automatically apply the steer-ing for a short period of time to help assistthe driver to return the vehicle to the centerof the traveling lane.

Page 220: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The warning and assist functions will stopwhen the vehicle returns to a positioninside of the lane marker.

JVS0206X

Dynamic driver assistance switchThe LDP system turns on when the dynamicdriver assistance switch on the steeringwheel is pushed when the [Lane DeparturePrevention] is enabled in the settings menuon the lower display. The driver assistsystem lane indicator (green) illuminates inthe vehicle information display when theLDP system is turned on.

JVS0246X

How to enable/disable the LDPsystemPerform the following steps to enable ordisable the LDP system.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Lane Assist].

3. Touch [Lane Departure Prevention] toenable or disable the system.

Starting and driving 5-35

Page 221: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-36 Starting and driving

Automatic deactivationCondition A:

The warning and assist functions of theLDP system are not designed to work underthe following conditions:

. When you operate the lane changesignal and change the traveling lanesin the direction of the signal. (The LDPsystem will be deactivated for approxi-mately 2 seconds after the lane changesignal is turned off.)

. When the vehicle speed lowers to lessthan approximately 45 MPH (70 km/h).

. When the BSI system activates anaudible warning or steering control.

After the above conditions have finishedand the necessary operating conditions aresatisfied, the warning and assist functionswill resume.

Condition B:

The assist function of the LDP system is notdesigned to work under the followingconditions (warning is still functional):

. When the steering wheel is turned asfar as necessary for the vehicle tochange lanes.

. When the accelerator pedal is de-pressed while the steering controlassist is provided.

. When the Intelligent Cruise Control (ICC)approach warning occurs.

. When the hazard warning flashers areoperated.

. When driving on a curve at high speed.After the above conditions have finishedand the necessary operating conditions aresatisfied, the LDP steering control assistfunction will resume.

Condition C:

Under the following conditions, a beep willsound and the LDP system will be canceledautomatically. The “LDP currently unavail-able” message will appear in the vehicleinformation display, and the LDP systemcannot be activated:

. When the VDC system (except TCSfunction) or ABS operates.

. When the VDC system is turned off.

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode.

Action to take:

When the above conditions no longer exist,push the dynamic driver assistance switchagain to turn the LDP system back on.

Temporary disabled status at high tem-perature:

If the vehicle is parked in direct sunlightunder high temperature conditions (overapproximately 1048F (408C)) and then theLDP system is turned on, the LDP systemmay be deactivated automatically. The“high cabin temperature” message willappear in the vehicle information display.

Action to take:

When the above conditions no longer exist,push the dynamic driver assistance switchagain to turn the LDP system back on.

SYSTEM MAINTENANCEThe LDW/LDP system uses the same lanecamera unit that is used by Active LaneControl, located above the inside mirror.

For maintenance of the camera, see “Lanecamera unit maintenance” (P.5-29).

Page 222: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

This section contains the informationabout the following systems:

. Blind Spot Warning (BSW) system

. Blind Spot InterventionTM (BSI) system

. Back-up Collision Intervention (BCI)system

BLIND SPOT WARNING (BSW) SYS-TEM/BLIND SPOT INTERVENTIONTM

(BSI) SYSTEMThe Blind Spot Warning (BSW) and BlindSpot InterventionTM (BSI) systems can helpalert the driver of other vehicles inadjacent lanes when changing lanes.

JVS0232X

The BSW system uses radar sensors *1installed near the rear bumper to detectother vehicles in an adjacent lane. Inaddition to the radar sensors, the BSIsystem uses a camera *2 installed behindthe windshield to monitor the lane markersof your traveling lane.

SSD1030

Detection zoneThe radar sensors can detect vehicles oneither side of your vehicle within thedetection zone shown as illustrated. Thisdetection zone starts from the outsidemirror of your vehicle and extends approxi-mately 10 ft (3 m) behind the rear bumper,and approximately 10 ft (3 m) sideways.

Starting and driving 5-37

BLIND SPOT WARNING/BLIND SPOTINTERVENTIONTM/BACK-UP COLLISIONINTERVENTION SYSTEMS (if so equipped)

Page 223: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-38 Starting and driving

SSD1028

Side indicator lightThe BSW system operates above approxi-mately 20 MPH (32 km/h). If the radarsensors detect vehicles in the detectionzone, the side indicator light illuminates. Ifthe driver then activates the turn signal, achime will sound twice and the sideindicator light will flash.

The BSI system operates above approxi-mately 37 MPH (60 km/h). If the systemdetects a vehicle in the detection zone andyour vehicle is approaching the lanemarker, the BSI system provides an audi-ble warning (three times), flashes the sideindicator light and slightly applies thesteering for a short period of time to help

return the vehicle back to the travelinglane. The BSI system provides an audiblewarning and turns on or flashes the sideindicator light even if the BSW system isoff.

WARNING

. The BSW and BSI systems are not areplacement for proper driving procedureand are not designed to prevent contactwith vehicles or objects. When changinglanes, always use the side and rearmirrors and turn and look in the direc-tion you will move to ensure it is safe tochange lanes. Never rely solely on theBSW or BSI system.

. Using the BSI system under some road,lane marker or weather conditions couldlead to improper system operation. Al-ways rely on your own steering andbraking operation to avoid accidents.

. The BSW and BSI systems may notprovide a warning or steering controlfor vehicles that pass through thedetection zone quickly.

SSD1028

Side indicator light

BSW system operationIf the radar sensors detect vehicles in thedetection zone, the side indicator lightlocated inside the vehicle (near the outsidemirrors) illuminates. If the turn signal isthen activated, the side indicator lightflashes and a chime sounds twice. Theside indicator light continues to flash untilthe detected vehicles leave the detectionzone.

The side indicator lights illuminate for afew seconds when the ignition switch isplaced in the ON position.

Page 224: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The brightness of the side indicator lightsis adjusted automatically depending on thebrightness of the ambient light.

A chime sounds if the radar sensors havealready detected vehicles when the driveractivates the turn signal. If a vehicle comesinto the detection zone after the driveractivates the turn signal, then only the sideindicator light flashes and no chimesounds. (See “BSW/BSI driving situations”(P.5-43).)

JVS0246X

Turning the BSW system ON/OFF:

Perform the following steps to turn theBSW system on or off.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Blind Spot Assist].

3. Touch [Blind Spot Warning] to turn thesystem ON/OFF.

Setting the side indicator light brightness:

The brightness of the side indicator lightscan be changed in the following steps:

1. Push the MENU button *1 and touch

[Driver Assistance] on the lower dis-play.

2. Touch [Blind Spot Assist].

3. Touch [Side Indicator Brightness] andselect [Bright], [Standard] or [Dark].

When the brightness setting is changed,the side indicator lights illuminate for afew seconds.

Starting and driving 5-39

Page 225: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-40 Starting and driving

SSD1028

Side indicator light

BSI system operationIf the radar sensors detect vehicles in thedetection zone, the side indicator lightlocated inside the vehicle (near the outsidemirrors) illuminates. If your vehicle isapproaching a lane marker, the sideindicator light flashes and an audiblewarning will sound three times. Then thesystem applies the steering for a shortperiod of time to help return the vehicleback to the center of the lane. BSI operatesregardless of turn signal usage.

NOTE:. Warning and steering control will only

be activated if the side indicator lightis already illuminated when your vehi-cle approaches a lane marker. Ifanother vehicle comes into the detec-tion zone after your vehicle hascrossed a lane marker, no warning orsteering control will be activated. (See“BSW/BSI driving situations” (P.5-43).)

. The BSI system is typically activatedearlier than the Lane Departure Pre-vention (LDP) system when your vehi-cle is approaching a lane marker.

JVS0206X

Dynamic driver assistance switch

JVS0309X

Driver assist system blind spot indicator

Page 226: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The BSI system turns on when the dynamicdriver assistance switch on the steeringwheel is pushed when the [Blind SpotIntervention] is enabled in the settingsmenu on the lower display. The driverassist system blind spot indicator (green)in the vehicle information display illumi-nates when the BSI system is turned on.

The BSI system provides an audible warn-ing and flashes the side indicator lightwhen BSI is activated even if the BSWsystem is off.

JVS0246X

How to enable/disable the BSI system:

Perform the following steps to enable ordisable the BSI system.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Blind Spot Assist].

3. Touch [Blind Spot Intervention] toenable or disable the system.

WARNING

. Do not use the BSI system under thefollowing conditions because the system

may not function properly.

— During bad weather (for example,rain, fog, snow, wind, etc.)

— When driving on slippery roads,such as on ice or snow, etc.

— When driving on winding or unevenroads.

— When there is a lane closure due toroad repairs.

— When driving in a makeshift lane.

— When driving on roads where thelane width is too narrow.

— When driving with a tire that is notwithin normal tire conditions (forexample, tire wear, low tire pressure,installation of tire chains, non-stan-dard wheels).

— When the vehicle is equipped withnon-original brake parts or suspen-sion parts.

. Excessive noise (for example, audiosystem volume, open vehicle window)will interfere with the chime sound, andit may not be heard.

Starting and driving 5-41

Page 227: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-42 Starting and driving

. The radar sensors may not be able todetect and activate BSI/BSW whencertain objects are present such as:— Pedestrians, bicycles, animals— Several types of vehicles such as

motorcycles— Oncoming vehicles— Vehicles remaining in the detection

zone when you accelerate from astop

— A vehicle merging into an adjacentlane at a speed approximately thesame as your vehicle

— A vehicle approaching rapidly frombehind.

— A vehicle which your vehicle over-takes rapidly.

See also “BSW/BSI driving situations”(P.5-43) for the situations in which theradar sensors may not be able to detectvehicle(s).

. Severe weather or road spray condi-tions may reduce the ability of theradar to detect other vehicles.

. The radar sensors’ detection zone isdesigned based on a standard lanewidth. When driving in a wider lane, theradar sensors may not detect vehicles

in an adjacent lane. When driving in anarrow lane, the radar sensors maydetect vehicles driving two lanes away.

. The radar sensors are designed toignore most stationary objects, how-ever objects such as guardrails, walls,foliage and parked vehicles may occa-sionally be detected. This is a normaloperating condition.

. The camera may not detect lane mar-kers in the following situations and theBSI system may not operate properly.— On roads where there are multiple

parallel lane markers; lane markersthat are faded or not painted clearly;yellow painted lane markers; non-standard lane markers; lane mar-kers covered with water, dirt, snow,etc.

— On roads where discontinued lanemarkers are still detectable.

— On roads where there are sharpcurves.

— On roads where there are sharplycontrasting objects, such as sha-dows, snow, water, wheel ruts,seams or lines remaining after roadrepairs.

— On roads where the traveling lanemerges or separates.

— When the vehicle’s traveling direc-tion does not align with the lanemarkers.

— When traveling close to the vehiclein front of you, which obstructs thelane camera unit detection range.

— When rain, snow or dirt adheres tothe windshield in front of a lanecamera unit.

— When the headlights are not brightdue to dirt on the lens or if aiming isnot adjusted properly.

— When strong light enters a lanecamera unit. (For example, lightdirectly shines on the front of thevehicle at sunrise or sunset.)

— When a sudden change in bright-ness occurs. (For example, when thevehicle enters or exits a tunnel orunder a bridge.)

Page 228: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSD1026

BSW/BSI DRIVING SITUATIONS

Another vehicle approaching frombehindThe side indicator light illuminates if avehicle enters the detection zone frombehind in an adjacent lane.

However, if the overtaking vehicle istraveling much faster than your vehicle,the side indicator light may not illuminatebefore the detected vehicle is beside yourvehicle. Always use the side and rearmirrors and turn and look in the directionyour vehicle will move to ensure it is safeto change lanes.

SSD1031

If the driver activates the turn signal, thenthe side indicator light flashes and a chimewill sound twice.

NOTE:

If the driver activates the turn signalbefore a vehicle enters the detection zone,the side indicator light will flash but nochime will sound when the other vehicle isdetected.

SSD1044

If the BSI system is on and your vehicle isapproaching a lane marker, the sideindicator light flashes and a chime willsound three times. Then the BSI systemslightly applies the steering to help returnthe vehicle back to the center of the drivinglane.

Starting and driving 5-43

Page 229: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-44 Starting and driving

SSD1032

NOTE:

If you accelerate from a stop with a vehiclein the detection zone, the other vehiclemay not be detected.

SSD1033

Overtaking other vehiclesThe side indicator light illuminates if youovertake a vehicle and that vehicle stays inthe detection zone for approximately 3seconds.

The radar sensors may not detect slowermoving vehicles if they are passed quickly.

SSD1034

If the driver activates the turn signal whileanother vehicle is in the detection zone,then the side indicator light flashes and achime will sound twice.

Page 230: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSD1093

If the BSI system is on and your vehicleapproaches a lane marker while anothervehicle is in the detection zone, the sideindicator light flashes and a chime willsound three times. Then, the BSI systemslightly applies the steering to help returnthe vehicle back to the center of the drivinglane.

SSD1036

NOTE:

When overtaking several vehicles in a row,the vehicles after the first vehicle may notbe detected if they are traveling closetogether.

Starting and driving 5-45

Page 231: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-46 Starting and driving

SSD1037

Entering from the sideThe side indicator light illuminates if avehicle enters the detection zone fromeither side.

NOTE:

The radar sensors may not detect a vehiclewhich is traveling at about the same speedas your vehicle when it enters the detec-tion zone.

SSD1038

If the driver activates the turn signal, thenthe side indicator light flashes and a chimewill sound twice.

NOTE:

If the driver activates the turn signalbefore a vehicle enters the detection zone,the side indicator light will flash but nochime will sound when another vehicle isdetected.

SSD1094

If the BSI system is on and your vehicleapproaches the lane marker while anothervehicle is in the detection zone, the sideindicator light flashes and a chime willsound three times. Then, the BSI systemslightly applies the steering to help returnthe vehicle back to the center of the drivinglane.

Page 232: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSD1040

NOTE:. The BSI system will not operate if your

vehicle is on a lane marker whenanother vehicle enters the detectionzone. In this case only the BSW systemoperates.

. BSI steering assist will not operate orwill stop operating and only a warningchime will sound under the followingconditions.— When the accelerator pedal is de-

pressed while steering control as-sist is provided.

— When steering quickly

— When the ICC, DCA, predictive for-ward collision warning or forwardemergency braking warnings sound.

— When the hazard warning flashersare operated.

— When driving on a curve at a highspeed.

BSW/BSI temporarily not availableCondition A:

. Under the following conditions, the BSIsystem will be turned off automatically,a beep will sound and the “currentlyunavailable” warning message willappear in the vehicle information dis-play. The BSW system is still available,but the BSI system will not be availableuntil the conditions no longer exist.— When the VDC system (except TCS

function) or ABS operates.— When the VDC system is turned off.— When the INFINITI Drive Mode Se-

lector is turned to the SNOW mode.Action to take:

Turn off the BSI system and turn it on againwhen the above conditions no longer exist.

Condition B:

BSW system: When radar blockage isdetected, the BSW system will be deacti-vated automatically, the “side radar ob-struction” warning message will appearand the driver assist system blind spotindicator (white) will blink in the vehicleinformation display.

BSI system: When radar blockage isdetected, the BSI system will be turnedoff automatically, a beep will sound andthe “side radar obstruction” warning mes-sage will appear in the vehicle informationdisplay.

The BSW and BSI systems are not availableuntil the conditions no longer exist.

The radar sensors may be blocked bytemporary ambient conditions such assplashing water, mist or fog. The blockedcondition may also be caused by objectssuch as ice, frost or dirt obstructing theradar sensors.

Action to take:

When the above conditions no longer exist,the BSW system will resume automatically.For the BSI system, turn it on again. If thedriver assist system blind spot indicator(white) continues to blink and/or the “side

Starting and driving 5-47

Page 233: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-48 Starting and driving

radar obstruction” warning message ap-pears even after the BSI system is turnedon again, stop the vehicle in a safe locationand turn the INFINITI Direct ResponseHybrid® System off. Check for and removeobjects obscuring the radar sensors on therear bumper, and restart the hybrid sys-tem.

Condition C:

If the vehicle is parked in direct sunlightunder high temperature conditions (overapproximately 1048F (408C)) and then theBSI system is turned on, the BSI systemmay be deactivated automatically. The“high cabin temperature” warning mes-sage will appear in the vehicle informationdisplay.

Action to take:

When the above conditions no longer exist,push the dynamic driver assistance switchagain to turn the BSI system back on.

BSW/BSI malfunctionWhen the BSW/BSI systems malfunction,they will be turned off automatically, abeep will sound, the and the system“malfunction” warning message with thedriver assist system blind spot indicator(orange) will appear in the vehicle informa-

tion display.

Action to take:

Stop the vehicle in a safe location, turn thehybrid system off and restart the hybridsystem.

If the system malfunction warning messagewith the driver assist system blind spotindicator (orange) continues to be dis-played, have the BSW/BSI systemschecked by an INFINITI retailer.

BACK-UP COLLISION INTERVENTION(BCI) SYSTEMThe Back-up Collision Intervention (BCI)system can help alert the driver ofapproaching vehicles or rear objects whenthe driver is backing out of a parkingspace.

When the shift lever is in the R (Reverse)position and the vehicle speed is less thanapproximately 5 MPH (8 km/h), the BCIsystem operates.

JVS0233X

JVS0173X

Page 234: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0234X

The BCI system uses radar sensors *1installed on both sides near the rearbumper to detect an approaching vehicleand sonar sensors *2 to detect objects inthe rear.

The radar sensors*1 detect the approach-ing vehicle from up to approximately 49 ft(15 m) away. The sonar sensors *2 detecta rear obstacle at up to approximately 4.9ft (1.5 m) from the bumper. Refer to theillustration for approximate zone coverageareas *3 .

If the radar detects a vehicle approachingfrom the side or the sonar detects closeobjects in the rear, the system gives visual

and audible warnings, and then appliesthe brake for a moment when the vehicle ismoving backwards. After the automaticbrake application, the driver must depressthe brake pedal to maintain brake pres-sure. If the driver’s foot is on the accel-erator pedal, the system pushes theaccelerator upward before applying thebrake. If you continue to press the accel-erator, the system will not engage thebrake.

WARNING

. The BCI system is not a replacement forproper driving procedure and is notdesigned to prevent contact with vehi-cles or objects. When backing out ofparking space, always use the insideand outside rearview mirrors and turnand look in the direction you will move.Never rely solely on the BCI system.

. There is a limitation to the detectioncapability of the radar and the sonar.Using the BCI system under some road,ground, lane marker, traffic or weatherconditions could lead to improper sys-tem operation. Always rely on your own

operation to avoid accidents.

Starting and driving 5-49

Page 235: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-50 Starting and driving

JVS0304X

Upper display

BCI system operationWhen the shift lever is placed in the R(Reverse) position, the indicator on the BCIsystem key *1 illuminates on the upperdisplay.

SSD1028

Side indicator light

JVS0307X

Upper display

The BCI system operates by detecting thevehicles and/or objects using either theradar or sonar sensors.

An approaching vehicle from the side:

If the radar detects an approaching vehiclefrom the side, the system chimes a sound(single beep), the side indicator light onthe side the vehicle approaching fromflashes and a yellow rectangular frame *Aappears on the upper display.

Page 236: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0172X

JVS0173X

NOTE:. In the case of several vehicles ap-

proaching in a row or in the oppositedirection, a chime may not be issued tothe BCI system after the first vehiclepasses the sensors.

. When the sonar sounds a tone, the BCIsystem does not chime a sound (singlebeep).

If the detected vehicle approaches closerand your vehicle is backing up toward thedetected vehicle, the system chimes asound (three times) and a red rectangularframe *A appears on the upper display.The system applies the brake for amoment. After the automatic brake appli-cation, the driver must depress the brakepedal to maintain brake pressure.

If the driver’s foot is on the acceleratorpedal, the system pushes the acceleratorpedal upward before applying the brake. Ifyou continue to press the acceleratorpedal, the system will not engage thebrake.

A close object behind the vehicle:

If the sonar detects a close object behindthe vehicle when your vehicle is backingup, the system chimes a sound (three

times) and red rectangular frame *Aappears on the upper display. The systemapplies the brake for a moment. After theautomatic brake application, the drivermust depress the brake pedal to maintainbrake pressure.

If the driver’s foot is on the acceleratorpedal, the system pushes the acceleratorpedal upward before applying the brake. Ifyou continue to press the acceleratorpedal, the system will not engage thebrake.

NOTE:

The BCI system does not operate if theobject is very close to the bumper.

Starting and driving 5-51

Page 237: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-52 Starting and driving

JVS0304X

Upper displayThe BCI system is turned off temporarily bytouching the BCI system key *1 on theupper display. The indicator on the BCI ONkey turns off.

When the shift lever is placed in the R(Reverse) position again, the BCI system isturned on.

The BCI system automatically turns onevery time the hybrid system is started.

JVS0246X

Turning the BCI system ON/OFFPerform the following steps to turning theBCI system on or off.

1. Push the MENU button *1 and touch[Settings] on the lower display.

2. Touch [Camera/Sonar].

3. Touch [Back-up Collision Intervention]to turn the system ON/OFF.

When the BCI system is turned off bytouching [Back-up Collision Intervention],the BCI system does not turn on auto-matically by the following operations:

. When the shift lever is placed in the R

(Reverse) position. When the hybrid system is restarted

Page 238: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0170X

Precautions on BCI system

WARNING

. The radar sensors may not be able todetect certain objects such as:

— Pedestrians, bicycles or animals

— A vehicle that is passing at speedsgreater than approximately 15 MPH(24 km/h)

. The radar sensors may not detect

approaching vehicles in certain situa-tions.

— When the vehicle parked next to youobstructs the beam of the radarsensor.

— When the vehicle is parked in anangled parking space.

— When the vehicle is parked oninclined ground.

— When a vehicle turns into or backsup into your vehicle’s aisle.

— When the angle formed by yourvehicle and approaching vehicle issmall.

. Severe weather or road spray conditionsmay reduce the ability of the radar todetect other vehicles.

. The sonar sensor may not detect:

— Small or moving objects

— Wedge-shaped objects

— Object close to the bumper (lessthan approximately 1 ft (30 cm))

— Thin objects such as rope, wire andchain, etc.

Starting and driving 5-53

Page 239: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-54 Starting and driving

. The brake engagement by the BCIsystem is not as effective on a slope asit is on flat ground. When on a steepslope the system may not functionproperly.

. Do not use the BCI systems under thefollowing conditions because the systemmay not function properly.

— When driving with a tire that is notwithin normal tire conditions (forexample, tire wear, low tire pressure,installation of tire chains, non-stan-dard wheels).

— When the vehicle is equipped withnon-original brake parts or suspen-sion parts.

. Excessive noise (for example, audiosystem volume, open vehicle window)will interfere with the chime sound, andit may not be heard.

BCI temporarily not availableWhen the following message appears inthe vehicle information display, a chimewill sound and the BCI system will beturned off automatically.

. “Unavailable High Accelerator Temp.”:When the accelerator pedal actuatordetects that the internal motor tem-perature is high.Action to take:Turn on the BCI system again when theabove condition no longer exists.

. “Unavailable Side Radar Obstruction”:When side radar blockage is detected.Action to take:If the warning message appears, parkthe vehicle in a safe place, turn thehybrid system off. Check for andremove objects obscuring the radarsensors on the rear bumper, and restartthe hybrid system. If the BSW or BSIsystem operates normally, the BCIsystem will also operate normally.(See “BSW/BSI temporarily not avail-able” (P.5-47).)

BCI malfunctionWhen the BCI system malfunctions, it willbe turned off automatically, a beep willsound and BCI system “malfunction”warning message will appear in the vehicleinformation display.

Stop the vehicle in a safe location, turn thehybrid system off and restart the hybrid

system. If the warning message continuesto appear, have the system checked by anINFINITI retailer.

Page 240: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0232X

SYSTEM MAINTENANCE. The two radar sensor units *1 for the

BSW, BSI and BCI systems are locatednear the rear bumper. Always keep thearea near the radar sensors clean. Donot attach stickers (including transpar-ent material), install accessories orapply additional paint near the radarsensors. Do not strike or damage thearea around the radar sensors. Consultan INFINITI retailer if the area aroundthe radar sensors is damaged due to acollision.

. The BSI system uses the same camera*2 that is used by Active Lane Control,

located above the inside mirror.For maintenance of the camera, see “Lanecamera unit maintenance” (P.5-29).

Radio frequency statementFor USA

This device complies with part 15 of theFCC Rules.

Operation is subject to the following twoconditions: (1) This device may not causeharmful interference, and (2) this devicemust accept any interference received,including interference that may causeundesired operation.

NOTE:

The manufacturer is not responsible forany radio or TV interference caused byunauthorized modifications to this equip-ment. Such modifications could void theuser’s authority to operate the equipment.

For Canada

This device complies with Industry CanadaStandard RSS-310.

Operation is subject to the following twoconditions: (1) This device may not causeharmful interference, and (2) this devicemust accept any interference received,

including interference that may causeundesired operation.

Frequency of operation: 24.05GHz —

24.25GHz

Field Strength: Not greater than 2.5V/mpeak (0.25V/m average) at a distance of 3m

Starting and driving 5-55

Page 241: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-56 Starting and driving

PRECAUTIONS ON CRUISE CONTROL. If the cruise control system malfunc-

tions, it will cancel automatically. Thecruise indicator (green) in the vehicleinformation display will then blink towarn the driver.

. If the engine coolant temperature be-comes excessively high, the cruisecontrol system will be canceled auto-matically.

. If the cruise indicator (green) blinks,turn the cruise control MAIN switch offand have the system checked by yourINFINITI retailer.

. The cruise indicator (green) may some-times blink when the cruise controlMAIN switch is turned ON while push-ing the SET/COAST (-), RESUME/ACCEL-ERATE (+) or CANCEL switch. To properlyset the cruise control system, performthe steps below in the order indicated.

WARNING

Do not use the cruise control when drivingunder the following conditions:

. when it is not possible to keep thevehicle at a set speed

. in heavy traffic or in traffic that varies inspeed

. on winding or hilly roads

. on slippery roads (rain, snow, ice, etc.)

. in very windy areas

Doing so could cause a loss of vehiclecontrol and result in an accident.

JVS0190X

CRUISE CONTROL OPERATIONS1. RESUME/ACCELERATE (+) switch2. SET/COAST (-) switch3. CANCEL switch4. MAIN (ON·OFF) switch

CRUISE CONTROL (if so equipped)

Page 242: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0306X

Cruise indicatorThe cruise indicator and the set vehiclespeed are displayed in the vehicle informa-tion display. The cruise indicator indicatesthe staus of the cruise control system bythe color.

The cruise control allows driving at a speedbetween 25 to 89 MPH (40 to 144 km/h)without keeping your foot on the accel-erator pedal.

To turn on the cruise control, push theMAIN switch on. The cruise indicator(white) will come on.

To set cruising speed, accelerate yourvehicle to the desired speed, push the

SET/COAST (-) switch and release it. (Thecruise indicator (green) will illuminates.)Take your foot off the accelerator pedal.Your vehicle will maintain the set speed.

. To pass another vehicle, depress theaccelerator pedal. When you releasethe pedal, the vehicle will return to thepreviously set speed.

. The vehicle may not maintain the setspeed on winding or hilly roads. If thishappens, drive without the cruise con-trol.

To cancel the preset speed, follow any ofthese methods:

1. Push the CANCEL switch.

2. Tap the brake pedal.

3. Turn the MAIN switch off.

After any of the above operation isperformed, the color of the cruise indicatorwill change from green to white.

. If you depress the brake pedal whilepushing the RESUME/ACCELERATE (+)or SET/COAST (-) switch and reset at thecruising speed, the cruise control willdisengage. Turn the MAIN switch offonce and then turn it on again.

. The cruise control will automaticallycancel if the vehicle slows more than

8 MPH (13 km/h) below the set speed.. If you move the shift lever to N (Neutral)

position, the cruise control will becanceled.

To reset at a faster cruising speed, use oneof the following methods:

. Depress the accelerator pedal. Whenthe vehicle attains the desired speed,push and release the SET/COAST (-)switch.

. Push and hold the RESUME/ACCELER-ATE (+) switch. When the vehicle attainsthe speed you desire, release theswitch.

. Push, then quickly release the RESUME/ACCELERATE (+) switch. Each time youdo this, the set speed will increase byabout 1 MPH (1.6 km/h).

To reset at a slower cruising speed, useone of the following methods:

. Lightly tap the brake pedal. When thevehicle attains the desired speed, pushthe SET/COAST (-) switch and release it.

. Push and hold the SET/COAST (-)switch. Release the switch when thevehicle slows down to the desiredspeed.

Starting and driving 5-57

Page 243: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-58 Starting and driving

. Push, then quickly release the SET/COAST (-) switch. Each time you do this,the set speed will decrease by about 1MPH (1.6 km/h).

To resume the preset speed, push andrelease the RESUME/ACCELERATE (+)switch. The vehicle will resume the lastset cruising speed when the vehicle speedis over 25 MPH (40 km/h).

The Intelligent Cruise Control (ICC) systemmaintains a selected distance from thevehicle in front of you within the speedrange of 0 to 90 MPH (0 to 144 km/h) up tothe set speed. The set speed can beselected by the driver between 20 to 90MPH (32 to 144 km/h).

The vehicle travels at a set speed when theroad ahead is clear.

The ICC function can be set to one of twocruise control modes:

. Vehicle-to-vehicle distance controlmode:For maintaining a selected distancebetween your vehicle and the vehiclein front of you up to the preset speed.

. Conventional (fixed speed) cruise con-trol mode:For cruising at a preset speed.

WARNING

. Always drive carefully and attentivelywhen using either cruise control mode.Read and understand the Owner’s Man-ual thoroughly before using the cruisecontrol. To avoid serious injury or death,do not rely on the system to prevent

accidents or to control the vehicle’sspeed in emergency situations. Do notuse cruise control except in appropriateroad and traffic conditions.

. In the conventional (fixed speed) cruisecontrol mode, a warning chime will notsound to warn you if you are too close tothe vehicle ahead. Pay special attentionto the distance between your vehicle andthe vehicle ahead of you or a collisioncould occur.

INTELLIGENT CRUISE CONTROL (ICC)SYSTEM (if so equipped)

Page 244: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0209X

1. Vehicle-to-vehicle distance controlmode

2. Conventional (fixed speed) cruise con-trol mode

Push the MAIN switch *A to choose thecruise control mode between the vehicle-to-vehicle distance control mode *1 andthe conventional (fixed speed) cruise con-trol mode *2 .

To choose the vehicle-to-vehicle distancecontrol mode*1 , quickly push and releasethe MAIN switch *A . To choose theconventional (fixed speed) cruise controlmode *2 , push and hold the MAIN switch*A for longer than approximately 1.5

seconds.

Once a control mode is activated, it cannotbe changed to the other cruise controlmode. To change the mode, push the MAINswitch once to turn the system off. Thenpush the MAIN switch again to turn thesystem back on and select the desiredcruise control mode.

Always confirm the setting in the IntelligentCruise Control (ICC) system display.

For the vehicle-to-vehicle distance controlmode, see the following description. Forthe conventional (fixed speed) cruise con-trol mode, see “Conventional (fixed speed)

cruise control mode” (P.5-74).

SELECTING THE VEHICLE-TO-VEHI-CLE DISTANCE CONTROL MODETo choose the vehicle-to-vehicle distancecontrol mode*1 , quickly push and releasethe MAIN switch *A .

VEHICLE-TO-VEHICLE DISTANCECONTROL MODEIn the vehicle-to-vehicle distance controlmode, the Intelligent Cruise Control (ICC)system automatically maintains a selecteddistance from the vehicle traveling in frontof you according to that vehicle’s speed(up to the set speed), or at the set speedwhen the road ahead is clear.

With ICC, the driver can maintain the samespeed as other vehicles without the con-stant need to adjust the set speed as youwould with a normal cruise control system.

Starting and driving 5-59

Page 245: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-60 Starting and driving

JVS0235X

PRECAUTIONS ON VEHICLE-TO-VE-HICLE DISTANCE CONTROL MODEThe system is intended to enhance theoperation of the vehicle when following avehicle traveling in the same lane anddirection.

If the distance sensor *A detects a slowermoving vehicle ahead, the system willreduce the vehicle speed so that yourvehicle follows the vehicle in front at theselected distance.

The system automatically controls thethrottle and applies the brakes (up toapproximately 40% of vehicle braking

power) if necessary.

The detection range of the sensor isapproximately 650 ft (200 m) ahead.

WARNING

. This system is only an aid to assist thedriver and is not a collision warning oravoidance device. It is the driver’sresponsibility to stay alert, drive safelyand be in control of the vehicle at alltimes.

. The system is primarily intended for useon straight, dry, open roads with lighttraffic. It is not advisable to use thesystem in city traffic or congested areas.

. This system will not adapt automaticallyto road conditions. This system shouldbe used in evenly flowing traffic. Do notuse the system on roads with sharpcurves, or on icy roads, in heavy rain orin fog.

The distance sensor will not detect undermost conditions:

. Stationary and slow moving vehicles

. Pedestrians or objects in the roadway

. Oncoming vehicles in the same lane

. Motorcycles traveling offset in the travellane

WARNING

. As there is a performance limit to thedistance control function, never relysolely on the Intelligent Cruise Control(ICC) system. This system does notcorrect careless, inattentive or absent-minded driving, or overcome poor visi-bility in rain, fog, or other bad weather.Decelerate the vehicle speed by depres-sing the brake pedal, depending on thedistance to the vehicle ahead and thesurrounding circumstances in order tomaintain a safe distance between vehi-cles.

. If the vehicle ahead comes to a stop, thevehicle decelerates to a standstill withinthe limitations of the system. Thesystem will cancel once it judges thatthe vehicle has come to a standstill andsound a warning chime. To prevent thevehicle from moving, the driver mustdepress the brake pedal.

. The system may not detect the vehicle in

Page 246: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

front of you in certain road or weatherconditions. To avoid accidents, never usethe ICC system under the followingconditions:

— On roads where the traffic is heavyor there are sharp curves

— On slippery road surfaces such ason ice or snow, etc.

— During bad weather (rain, fog, snow,etc.)

— When rain, snow or dirt adhere tothe system sensor

— On steep downhill roads (the vehi-cle may go beyond the set vehiclespeed and frequent braking mayresult in overheating the brakes)

— On repeated uphill and downhillroads

— When traffic conditions make itdifficult to keep a proper distancebetween vehicles because of fre-quent acceleration or deceleration

. In some road or traffic conditions, avehicle or object can unexpectedly comeinto the sensor detection zone and causeautomatic braking. You may need to

control the distance from other vehiclesusing the accelerator pedal. Always stayalert and avoid using the ICC systemwhen it is not recommended in thissection.

JVS0235X

VEHICLE-TO-VEHICLE DISTANCECONTROL MODE OPERATIONAlways pay attention to the operation ofthe vehicle and be ready to manuallycontrol the proper following distance. Thevehicle-to-vehicle distance control mode ofthe Intelligent Cruise Control (ICC) systemmay not be able to maintain the selecteddistance between vehicles (following dis-tance) or selected vehicle speed undersome circumstances.

The vehicle-to-vehicle distance controlmode uses a sensor *A located behindthe lower grille of the front bumper to

Starting and driving 5-61

Page 247: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-62 Starting and driving

detect vehicles traveling ahead. The sensorgenerally detects the signals returned fromthe vehicle ahead. Therefore, if the sensorcannot detect the reflection from thevehicle ahead, the ICC system may notmaintain the selected distance.

The following are some conditions in whichthe sensor cannot detect the signals:

. When the snow or road spray fromtraveling vehicles reduces the sensor’svisibility

. When excessively heavy baggage isloaded in the rear seat or the trunk ofyour vehicle

The ICC system is designed to automati-cally check the sensor’s operation withinthe limitations of the system. When thesensor area of the front bumper is coveredwith dirt or is obstructed, the system willautomatically be canceled. If the sensorarea is covered with ice, a transparent ortranslucent vinyl bag, etc., the ICC systemmay not detect them. In these instances,the vehicle-to-vehicle distance controlmode may not cancel and may not be ableto maintain the selected following distancefrom the vehicle ahead. Be sure to checkand clean the sensor area regularly.

The vehicle-to-vehicle distance controlmode is designed to maintain a selecteddistance and reduce the speed to matchthe slower vehicle ahead; the system willdecelerate the vehicle as necessary and ifthe vehicle ahead comes to a stop, thevehicle decelerates to a standstill. How-ever, the ICC system can only apply up toapproximately 40% of the vehicles totalbraking power. This system should only beused when traffic conditions allow vehiclespeeds to remain fairly constant or whenvehicle speeds change gradually. If avehicle moves into the traveling lane aheador if a vehicle traveling ahead rapidlydecelerates, the distance between vehiclesmay become closer because the ICC systemcannot decelerate the vehicle quickly en-ough. If this occurs, the ICC system willsound a warning chime and blink thesystem display to notify the driver to takenecessary action.

The system will cancel and a warningchime will sound if the speed is belowapproximately 15 MPH (24 km/h) and avehicle is not detected ahead. The systemwill also disengage when the vehicle goesabove the maximum set speed.

See “Approach warning” (P.5-71).

The following items are controlled in thevehicle-to-vehicle distance control mode:

. When there are no vehicles travelingahead, the vehicle-to-vehicle distancecontrol mode maintains the speed setby the driver. The set speed range isbetween approximately 20 and 90 MPH(32 and 144 km/h).

. When there is a vehicle traveling ahead,the vehicle-to-vehicle distance controlmode adjusts the speed to maintain thedistance, selected by driver, from thevehicle ahead. The adjusting speedrange is up to the set speed. If thevehicle ahead comes to a stop, thevehicle decelerates to a standstill with-in the limitations of the system. Thesystem will cancel once it judges astandstill with a warning chime.

. When the vehicle traveling ahead hasmoved out from its lane of travel, thevehicle-to-vehicle distance controlmode accelerates and maintains vehi-cle speed up to the set speed.

The ICC system does not control vehiclespeed or warn you when you approachstationary and slow moving vehicles. Youmust pay attention to vehicle operation tomaintain proper distance from vehicles

Page 248: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

ahead when approaching toll gates ortraffic congestion.

SSD0252

The detection zone of the radar sensor islimited. A vehicle ahead must be in thedetection zone for the vehicle-to-vehicledistance detection mode to maintain theselected distance from the vehicle ahead.

A vehicle ahead may move outside of thedetection zone due to its position withinthe same lane of travel. Motorcycles maynot be detected in the same lane ahead ifthey are traveling offset from the centerlineof the lane. A vehicle that is entering thelane ahead may not be detected until thevehicle has completely moved into thelane. If this occurs, the ICC system maywarn you by blinking the system indicator

and sounding the chime. The driver mayhave to manually control the properdistance away from vehicle travelingahead.

Starting and driving 5-63

Page 249: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-64 Starting and driving

SSD0253

When driving on some roads, such aswinding, hilly, curved, narrow roads, orroads which are under construction, theradar sensor may detect vehicles in adifferent lane, or may temporarily notdetect a vehicle traveling ahead. This maycause the ICC system to decelerate oraccelerate the vehicle.

The detection of vehicles may also beaffected by vehicle operation (steeringmaneuver or traveling position in the lane,etc.) or vehicle condition. If this occurs, theICC system may warn you by blinking thesystem indicator and sounding the chimeunexpectedly. You will have to manually

control the proper distance away from thevehicle traveling ahead.

SSD0254

When driving on the freeway at a set speedand approaching a slower traveling vehicleahead, the ICC will adjust the speed tomaintain the distance, selected by thedriver, from the vehicle ahead. If thevehicle ahead changes lanes or exits thefreeway, the ICC system will accelerate andmaintain the speed up to the set speed.Pay attention to the driving operation tomaintain control of the vehicle as itaccelerates to the set speed.

The vehicle may not maintain the set speedon winding or hilly roads. If this occurs,you will have to manually control thevehicle speed.

Page 250: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0226X

ICC switchThe system is operated by a MAIN switchand four control switches, all mounted onthe steering wheel.

1. RESUME/ACCELERATE (+) switch:

Resumes set speed or increases speedincrementally.

2. SET/COAST (-) switch:

Sets desired cruise speed, reducesspeed incrementally.

3. CANCEL switch:

Deactivates the system without erasingthe set speed.

4. MAIN switch:

Master switch to activate the system

5. DISTANCE switch:

Changes the vehicle’s following dis-tance:. Long. Middle. Short

JVS0220X

ICC system display and indicatorsThe display is located between the speed-ometer and tachometer.

1. This indicator indicates the ICC systemstatus depending on a color.. Intelligent Cruise Control system ON

indicator (white):Indicates that the MAIN switch is ON.

. Intelligent Cruise Control system setindicator (green):Indicates that cruising speed is set

. Intelligent Cruise Control systemwarning (orange):Indicates that if there is a malfunc-

Starting and driving 5-65

Page 251: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-66 Starting and driving

tion in the ICC system.

2. Vehicle ahead detection indicator:

Indicates whether it detects a vehicle infront of you.

3. Set vehicle speed indicator:

Indicates the set vehicle speed.

For Canadian models, the speed isdisplayed in km/h.

4. Set distance indicator:

Displays the selected distance betweenvehicles set with the DISTANCE switch.

JVS0212X

Operating vehicle-to-vehicle dis-tance control modeTo turn on the cruise control, quickly pushand release the MAIN switch *A on. TheIntelligent Cruise Control (ICC) system ONindicator (white), set distance indicatorand set vehicle speed indicator come onand in a standby state for setting.

JVS0213X

To set cruising speed, accelerate yourvehicle to the desired speed, push theSET/COAST (-) switch and release it. (TheICC system set indicator (green), vehicleahead detection indicator, set distanceindicator and set vehicle speed indicatorcome on.) Take your foot off the acceleratorpedal. Your vehicle will maintain the setspeed.

Page 252: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0214X

When the SET/COAST (-) switch is pushedunder the following conditions, the systemcannot be set and the ICC indicators willblink for approximately 2 seconds:

. When traveling below 20 MPH (32km/h) and the vehicle ahead is notdetected

. When the shift lever is not in the D(Drive) or manual shift mode

. When the parking brake is applied

. When the brakes are operated by thedriver

When the SET/COAST (-) switch is pushedunder the following conditions, the systemcannot be set.

A warning chime will sound and the“currently unavailable” warning messageappears in the vehicle information display.

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode (To use theICC system, turn the INFINITI DriveMode Selector to a mode other thanthe SNOW mode, push the MAIN switchto turn off the ICC and reset the ICCswitch by pressing the MAIN switchagain.)For details about the INFINITI DriveMode Selector, see “INFINITI DriveMode Selector” (P.5-21).

. When the VDC system is off (To use theICC system, turn on the VDC system.Push the MAIN switch to turn off the ICCsystem and reset the ICC switch bypushing the MAIN switch again.)For details about the VDC system, see“Vehicle Dynamic Control (VDC) sys-tem” (P.5-108).

. When ABS or VDC (including the trac-tion control system) is operating

. When a wheel is slipping (To use the ICCsystem, make sure the wheels are nolonger slipping.)

Starting and driving 5-67

Page 253: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-68 Starting and driving

JVS0210X

1. System set display with vehicle ahead2. System set display without vehicle

ahead

System operation

WARNING

Normally when controlling the distance to avehicle ahead, this system automaticallyaccelerates or decelerates your vehicleaccording to the speed of the vehicle ahead.Depress the accelerator to properly accel-erate your vehicle when acceleration isrequired for a lane change. Depress the

brake pedal when deceleration is required tomaintain a safe distance to the vehicleahead due to its sudden braking or if avehicle cuts in. Always stay alert whenusing the ICC system.

The driver sets the desired vehicle speedbased on the road conditions. The ICCsystem maintains the set vehicle speed,similar to standard cruise control, as longas no vehicle is detected in the lane ahead.

The ICC system displays the set speed.

Vehicle detected ahead:

When a vehicle is detected in the laneahead, the ICC system decelerates thevehicle by controlling the throttle andapplying the brakes to match the speedof a slower vehicle ahead. The system thencontrols the vehicle speed based on thespeed of the vehicle ahead to maintain thedriver selected distance.

The stoplights of the vehicle come onwhen braking is performed by the ICCsystem.

When the brake operates, a noise may beheard. This is not a malfunction.

When a vehicle ahead is detected, thevehicle ahead detection indicator comeson. The ICC system will also display the setspeed and selected distance.

Vehicle ahead not detected:

When a vehicle is no longer detectedahead, the ICC system gradually acceler-ates your vehicle to resume the previouslyset vehicle speed. The ICC system thenmaintains the set speed.

When a vehicle is no longer detected thevehicle ahead detection indicator turns off.

If a vehicle ahead appears during accel-eration to the set vehicle speed or any time

Page 254: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

the ICC system is in operation, the systemcontrols the distance to that vehicle.

When a vehicle is no longer detected underapproximately 15 MPH (24 km/h), thesystem will be canceled.

JVS0211X

When passing another vehicle, the setspeed indicator will flash when the vehiclespeed exceeds the set speed. The vehicledetect indicator will turn off when the areaahead of the vehicle is open. When thepedal is released, the vehicle will return tothe previously set speed.

Even though your vehicle speed is set inthe ICC system, you can depress theaccelerator pedal when it is necessary toaccelerate your vehicle rapidly.

How to change the set vehiclespeedTo cancel the preset speed, use any ofthese methods:

. Push the CANCEL switch. The set vehiclespeed indicator will go out.

. Tap the brake pedal. The set vehiclespeed indicator will go out.

. Turn the MAIN switch off. Both theIntelligent Cruise Control system setindicator (green) and set vehicle speedindicator will go out.

To reset at a faster cruising speed, use oneof the following methods:

. Depress the accelerator pedal. Whenthe vehicle attains the desired speed,push and release the SET/COAST (-)switch.

. Push and hold the RESUME/ACCELER-ATE (+) switch. The set vehicle speedwill increase by approximately 5 MPH(5 km/h for Canada).

. Push, then quickly release the RESUME/ACCELERATE (+) switch. Each time youdo this, the set speed will increase byapproximately 1 MPH (1 km/h forCanada).

Starting and driving 5-69

Page 255: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-70 Starting and driving

To reset at a slower cruising speed, useone of the following methods:

. Lightly tap the brake pedal. When thevehicle attains the desired speed, pushthe SET/COAST (-) switch and release it.

. Push and hold the SET/COAST (-)switch. The set vehicle speed willdecrease by approximately 5 MPH (5km/h for Canada).

. Push, then quickly release the SET/COAST (-) switch. Each time you do this,the set speed will decrease by approxi-mately 1 MPH (1 km/h for Canada).

To resume the preset speed, push andrelease the RESUME/ACCELERATE (+)switch. The vehicle will resume the lastset cruising speed when the vehicle speedis over 20 MPH (32 km/h).

JVS0216X

How to change the set distance tothe vehicle aheadThe distance to the vehicle ahead can beselected at any time depending on thetraffic conditions.

Each time the DISTANCE switch *A ispushed, the set distance will change tolong, middle, short and back to long againin that sequence.

Page 256: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0250M

. The distance to the vehicle ahead willchange according to the vehicle speed.The higher the vehicle speed, thelonger the distance.

. If the INFINITI Direct Response Hybrid®

System is stopped, the set distancebecomes “long”. (Each time the hybrid

system is started, the initial settingbecomes “long”.)

Approach warningIf your vehicle comes closer to the vehicleahead due to rapid deceleration of thatvehicle or if another vehicle cuts in, thesystem warns the driver with the chimeand ICC system display. Decelerate bydepressing the brake pedal to maintain asafe vehicle distance if:

. The chime sounds.

. The vehicle ahead detection and setdistance indicator blink.

The warning chime may not sound in somecases when there is a short distancebetween vehicles. Some examples are:

. When the vehicles are traveling at thesame speed and the distance betweenvehicles is not changing

. When the vehicle ahead is travelingfaster and the distance between vehi-cles is increasing

. When a vehicle cuts in near your vehicleThe warning chime will not sound when:

. Your vehicle approaches other vehiclesthat are parked or moving slowly.

. The accelerator pedal is depressed,overriding the system.

Starting and driving 5-71

Page 257: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-72 Starting and driving

SSD0284A

NOTE:

The approach warning chime may soundand the system display may blink whenthe radar sensor detects objects on theside of the vehicle*A or on the side of theroad*A . This may cause the ICC system todecelerate or accelerate the vehicle. Theradar sensor may detect these objectswhen the vehicle is driven on windingroads, narrow roads, hilly roads or whenentering or exiting a curve. In these casesyou will have to manually control theproper distance ahead of your vehicle.

Also, the sensor sensitivity can be affectedby vehicle operation (steering maneuver or

driving position in the lane) or traffic orvehicle condition (for example, if a vehicleis being driven with some damage).

Automatic cancellationA chime sounds under the following con-ditions and the control is automaticallycanceled.

. When the vehicle ahead is not detectedand your vehicle is traveling below thespeed of 15 MPH (24 km/h)

. When the system judges the vehicle isat standstill

. When the shift lever is not in the Dposition or Manual mode

. When the parking brake is applied

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode

. When the VDC system is turned off

. When ABS or VDC (including the trac-tion control system) operates

. When distance measurement becomesimpaired due to adhesion of dirt orobstruction to the sensor

. When a wheel slips

Warning and displayCondition A:

Under the following conditions, the Intelli-gent Cruise Control (ICC) system is auto-matically canceled. The chime will soundand the “currently unavailable” warningmessage will appear in the vehicle infor-mation display.

. When the VDC is turned off

. When the ABS or VDC (including thetraction control system) operates

. When a tire slips

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode

Action to take:

When the conditions listed above are nolonger present, turn the ICC system backon to use the system.

Condition B:

When the radar sensor area of the frontbumper is covered with dirt or is ob-structed, making it impossible to detect avehicle ahead, the ICC system is automa-tically canceled.

The chime will sound and the “front radarobstruction” warning message will appearin the vehicle information display.

Page 258: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Action to take:

If the warning message appears, park thevehicle in a safe place, turn the hybridsystem off. When the radar signal istemporarily interrupted, clean the sensorarea of the front bumper and restart thehybrid system. If the “front radar obstruc-tion” warning message continues to bedisplayed, have the ICC system checked byan INFINITI retailer.

JVS0221X

Condition C:

When the ICC system is not operatingproperly, the chime sounds and the ICCsystem warning (orange) will appear.

Action to take:

If the warning appears, park the vehicle ina safe place. Turn the hybrid system off,restart the hybrid system, resume drivingand set the ICC system again.

If it is not possible to set the system or thewarning stays on, it may indicate that theICC system is malfunctioning. Althoughthe vehicle is still driveable under normalconditions, have the vehicle checked at an

INFINITI retailer.

Starting and driving 5-73

Page 259: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-74 Starting and driving

JVS0235X

Sensor maintenanceThe sensor for the ICC system*A is locatedbehind the lower grille of the front bumper.

To keep the ICC system operating properly,be sure to observe the following:

. Always keep the sensor area of the frontbumper clean.

. Do not strike or damage the areasaround the sensor.

. Do not cover or attach stickers or similarobjects on the front bumper near thesensor area. This could cause failure ormalfunction.

. Do not attach metallic objects near thesensor area (brush guard, etc.). Thiscould cause failure or malfunction.

. Do not alter, remove or paint the frontbumper. Before customizing or restor-ing the front bumper, contact anINFINITI retailer.

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

1. This device may not cause harmfulinterference, and

2. This device must accept any interfer-ence received, including interferencethat may cause undesired operation.

FCC Warning

Changes or modification not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with Industry Canadalicence-exempt RSS standard(s). Operationis subject to the following two conditions:

1. This device may not cause interference,and

2. This device must accept any interfer-ence, including interference that maycause undesired operation of the de-vice.

CONVENTIONAL (fixed speed)CRUISE CONTROL MODEThis mode allows driving at a speedbetween 25 to 90 MPH (40 to 144 km/h)without keeping your foot on the accel-erator pedal.

WARNING

. In the conventional (fixed speed) cruisecontrol mode, a warning chime does notsound to warn you if you are too close tothe vehicle ahead, as neither the pre-sence of the vehicle ahead nor thevehicle-to-vehicle distance is detected.

. Pay special attention to the distancebetween your vehicle and the vehicleahead of you or a collision could occur.

. Always confirm the setting in the In-telligent Cruise Control system display.

Page 260: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Do not use the conventional (fixedspeed) cruise control mode when drivingunder the following conditions:

— when it is not possible to keep thevehicle at a set speed

— in heavy traffic or in traffic thatvaries in speed

— on winding or hilly roads

— on slippery roads (rain, snow, ice,etc.)

— in very windy areas

. Doing so could cause a loss of vehiclecontrol and result in an accident.

JVS0222X

Conventional (fixed speed) cruisecontrol switch1. RESUME/ACCELERATE (+) switch:

Resumes set speed or increases speedincrementally.

2. SET/COAST (-) switch:

Sets the desired cruise speed, reducesspeed incrementally.

3. CANCEL switch:

Deactivates the system without erasingthe set speed.

4. MAIN switch:

Master switch to activate the system.

JVS0301X

Conventional (fixed speed) cruisecontrol mode display and indica-torsThe display is located in the vehicleinformation display.

1. Cruise indicator:

This indicator indicates the condition ofICC system depending on a color.. Cruise control ON indicator (white):

Indicates that the MAIN switch is ON.. Cruise control set indicator (green):

Displays while the vehicle speed iscontrolled by the conventional (fixedspeed) cruise control mode of the

Starting and driving 5-75

Page 261: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-76 Starting and driving

ICC system.. Cruise control system warning (or-

ange):Indicates that there is a malfunctionin the ICC system.

2. Set vehicle speed indicator:

This indicator indicates the set vehiclespeed.

For Canadian models, the speed isdisplayed in km/h.

JVS0223X

Operating conventional (fixedspeed) cruise control modeTo turn on the conventional (fixed speed)cruise control mode, push and hold theMAIN switch *A for longer than about 1.5seconds.

When pushing the MAIN switch on, theconventional (fixed speed) cruise controlmode display and indicators are displayedin the vehicle information display. Afteryou hold the MAIN switch on for longerthan about 1.5 seconds, the IntelligentCruise Control (ICC) system display goesout. The cruise indicator appears. You can

now set your desired cruising speed.Pushing the MAIN switch again will turnthe system completely off.

When the Distance Control Assist (DCA)system is on, the conventional (fixedspeed) cruise control mode cannot beturned on even though the MAIN switch ispushed and held.

To turn on the conventional (fixed speed)cruise control mode, turn off the DCAsystem. See “Distance Control Assist(DCA) system” (P.5-79).

When the ignition switch is pushed to theOFF position, the system is also automati-cally turned off. To use the IntelligentCruise Control again, quickly push andrelease the MAIN switch (vehicle-to-vehicledistance control mode) or push and hold it(conventional cruise control mode) again toturn it on.

CAUTION

To avoid accidentally engaging cruise con-trol, make sure to turn the MAIN switch offwhen not using the Intelligent Cruise Con-trol system.

Page 262: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0224X

To set cruising speed, accelerate yourvehicle to the desired speed, push theSET/COAST (-) switch and release it. (Thecolor of the cruise indicator changes togreen and set vehicle speed indicatorcomes on.) Take your foot off the accel-erator pedal. Your vehicle will maintain theset speed.

. To pass another vehicle, depress theaccelerator pedal. When you releasethe pedal, the vehicle will return to thepreviously set speed.

. The vehicle may not maintain the setspeed when going up or down steephills. If this happens, manually main-

tain vehicle speed.To cancel the preset speed, use any of thefollowing methods:

1. Push the CANCEL switch. The vehiclespeed indicator will go out.

2. Tap the brake pedal. The vehicle speedindicator will go out.

3. Turn the MAIN switch off. Both thecruise indicator and vehicle speedindicator will go out.

To reset at a faster cruising speed, use oneof the following three methods:

1. Depress the accelerator pedal. Whenthe vehicle attains the desired speed,push and release the SET/COAST (-)switch.

2. Push and hold the RESUME/ACCELER-ATE (+) switch. When the vehicle attainsthe speed you desire, release theswitch.

3. Push, then quickly release the RE-SUME/ACCELERATE (+) switch. Eachtime you do this, the set speed willincrease by about 1 MPH (1.6 km/h).

To reset at a slower cruising speed, useone of the following three methods:

1. Lightly tap the brake pedal. When thevehicle attains the desired speed, pushthe SET/COAST (-) switch and release it.

2. Push and hold the SET/COAST (-)switch. Release the switch when thevehicle slows down to the desiredspeed.

3. Push, then quickly release the SET/COAST (-) switch. Each time you do this,the set speed will decrease by about 1MPH (1.6 km/h).

To resume the preset speed, push andrelease the RESUME/ACCELERATE (+)switch. The vehicle will resume the lastset cruising speed when the vehicle speedis over 25 MPH (40 km/h).

Automatic cancellationA chime sounds under the following con-ditions and the control is automaticallycanceled.

. When the vehicle slows down morethan 8 MPH (13 km/h) below the setspeed

. When the shift lever is not in the D(Drive) or manual shift mode

. When the parking brake is applied.

Starting and driving 5-77

Page 263: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-78 Starting and driving

. When the VDC operates (including thetraction control system)

. When a tire slips

JVS0306X

WarningWhen the system is not operating properly,the chime sounds and the color of thecruise indicator will change to orange.

Action to take:

If the color of the cruise indicator changesto orange, park the vehicle in a safe place.Turn the hybrid system off, restart thehybrid system, resume driving and thenperform the setting again.

If it is not possible to set or the indicatorstays on, it may indicate that the system ismalfunctioning. Although the vehicle isstill driveable under normal conditions,

have the vehicle checked at an INFINITIretailer.

Page 264: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The Distance Control Assist (DCA) systembrakes and moves the accelerator pedalupward according to the distance from andthe relative speed of the vehicle ahead tohelp assist the driver to maintain afollowing distance.

WARNING

. Always drive carefully and attentivelywhen using the DCA system. Read andunderstand the Owner’s Manual thor-oughly before using the DCA system. Toavoid serious injury or death, do not relyon the system to prevent accidents or tocontrol the vehicle’s speed in emergencysituations. Do not use the DCA systemexcept in appropriate road and trafficconditions.

. If the vehicle ahead comes to a stop, thevehicle decelerates to a standstill withinthe limitations of the system. Thesystem will cancel once it judges thatthe vehicle has come to a standstill witha warning chime. To prevent the vehiclefrom moving, the driver must depressthe brake pedal.

. The DCA system will not apply brakecontrol while the driver’s foot is on the

accelerator pedal.

JVS0235X

PRECAUTIONS ON DCA SYSTEMThe system is intended to assist the driverto keep a following distance from thevehicle ahead traveling in the same laneand direction.

If the radar sensor *A detects a slowermoving vehicle ahead, the system willreduce the vehicle speed to help assistthe driver to maintain a following distance.

The system automatically controls thethrottle and applies the brakes (up toapproximately 40% of vehicle brakingpower) if necessary.

The detection range of the sensor is

Starting and driving 5-79

DISTANCE CONTROL ASSIST (DCA) SYSTEM(if so equipped)

Page 265: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-80 Starting and driving

approximately 650 ft (200 m) ahead.

WARNING

. This system is only an aid to assist thedriver and is not a collision warning oravoidance device. It is the driver’sresponsibility to stay alert, drive safelyand be in control of the vehicle at alltimes.

. This system will not adapt automaticallyto road conditions. Do not use thesystem on roads with sharp curves, oron icy roads, in heavy rain or in fog.

The distance sensor will not detect thefollowing objects:

. Stationary and slow moving vehicles

. Pedestrians or objects in the roadway

. Oncoming vehicles in the same lane

. Motorcycles traveling offset in the travellane

WARNING

. As there is a performance limit to thedistance control function, never rely

solely on the DCA system. This systemdoes not correct careless, inattentive orabsent-minded driving, or overcomepoor visibility in rain, fog, or other badweather. Decelerate the vehicle speed bydepressing the brake pedal, dependingon the distance to the vehicle ahead andthe surrounding circumstances in orderto maintain a safe distance betweenvehicles.

. The system may not detect the vehicle infront of you in certain road or weatherconditions. To avoid accidents, never usethe DCA system under the followingconditions:

— On roads with sharp curves

— On slippery road surfaces such ason ice or snow, etc.

— During bad weather (rain, fog, snow,etc.)

— When rain, snow or dirt adhere tothe system sensor

— On steep downhill roads (frequentbraking may result in overheatingthe brakes)

— On repeated uphill and downhillroads

. In some road or traffic conditions, avehicle or object can unexpectedly comeinto the sensor detection zone and causeautomatic braking. You may need tocontrol the distance from other vehiclesusing the accelerator pedal. Always stayalert and avoid using the DCA systemwhen it is not recommended in thissection.

Page 266: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0235X

DCA SYSTEM OPERATIONAlways pay attention to the operation ofthe vehicle and be ready to manuallydecelerate to maintain the proper followingdistance. The Distance Control Assist (DCA)system may not be able to decelerate thevehicle under some circumstances.

The DCA system uses a sensor *A locatedbehind the lower grille of the front bumperto detect vehicles traveling ahead.

The following are some conditions in whichthe sensor cannot detect the signals:

. When the snow or road spray fromtraveling vehicles reduces the sensor’s

visibility. When excessively heavy baggage is

loaded in the rear seat or the luggageroom of your vehicle

The DCA system is designed to automati-cally check the sensor’s operation. Whenthe sensor area of the front bumper iscovered with dirt or is obstructed, thesystem will automatically be canceled. Ifthe sensor area is covered with ice, atransparent or translucent vinyl bag, etc.,the DCA system may not detect them. Inthese instances, the DCA system may notbe able to decelerate the vehicle properly.Be sure to check and clean the sensor arearegularly.

The DCA system is designed to help assistthe driver to maintain a following distancefrom the vehicle ahead. The system willdecelerate as necessary and if the vehicleahead comes to a stop, the vehicledecelerates to a standstill. However, theDCA system can only apply up to approxi-mately 40% of the vehicles total brakingpower. If a vehicle moves into the travelinglane ahead or if a vehicle traveling aheadrapidly decelerates, the distance betweenvehicles may become closer because theDCA system cannot decelerate the vehicle

quickly enough. If this occurs, the DCAsystem will sound a warning chime andblink the system display to notify the driverto take necessary action.

See “Approach warning” (P.5-86).

This system only brakes and moves theaccelerator pedal upward to help assist thedriver to maintain a following distancefrom the vehicle ahead. Accelerationshould be operated by the driver.

The DCA system does not control vehiclespeed or warn you when you approachstationary and slow moving vehicles. Youmust pay attention to vehicle operation tomaintain proper distance from vehiclesahead.

Starting and driving 5-81

Page 267: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-82 Starting and driving

SSD0252

The detection zone of the sensor is limited.A vehicle ahead must be in the detectionzone for the system to operate.

A vehicle ahead may move outside of thedetection zone due to its position withinthe same lane of travel. Motorcycles maynot be detected in the same lane ahead ifthey are traveling offset from the centerlineof the lane. A vehicle that is entering thelane ahead may not be detected until thevehicle has completely moved into thelane. If this occurs, the system may warnyou by blinking the system indicator andsounding the chime. The driver may haveto manually control the proper distance

away from vehicle traveling ahead.

Page 268: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SSD0253

When driving on some roads, such aswinding, hilly, curved, narrow roads, orroads which are under construction, thesensor may detect vehicles in a differentlane, or may temporarily not detect avehicle traveling ahead. This may causethe system to work inappropriately.

The detection of vehicles may also beaffected by vehicle operation (steeringmaneuver or traveling position in the lane,etc.) or vehicle condition. If this occurs, thesystem may warn you by blinking thesystem indicator and sounding the chimeunexpectedly. You will have to manuallycontrol the proper distance away from the

vehicle traveling ahead.

JVS0225X

DCA system display and indicatorsThe display is located between the speed-ometer and tachometer.

1. Driver assist system forward indicator. Driver assist system forward indica-

tor (green):Indicates that the DCA system is ON.

. Driver assist system forward indica-tor (orange):Indicates whether there is a mal-function in the DCA system.

2. Vehicle ahead detection indicator:

Indicates whether it detects a vehicle in

Starting and driving 5-83

Page 269: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-84 Starting and driving

front of you.

JVS0206X

Dynamic driver assistance switch

Operating DCA systemThe DCA system turns on when thedynamic driver assistance switch on thesteering wheel is pushed when the [Dis-tance Control Assist] is enabled in thesettings menu on the lower display. Thedriver assist system forward indicator(green) appears in the vehicle informationdisplay when the DCA system is turned on.

The system will start to operate after thevehicle speed becomes above approxi-mately 3 MPH (5 km/h).

JVS0246X

How to enable/disable the DCA system:

Perform the following steps to enable ordisable the DCA system.

1. Push the MENU *1 button and touch[Driver Assistance] on the lower dis-play.

2. Touch [Forward Assist].

3. Touch [Distance Control Assist] to en-able or disable the system.

Under the following conditions, the DCAsystem will not operate and the “currentlyunavailable” warning message will appearin the vehicle information display:

Page 270: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode (To use theDCA system, turn the INFINITI DriveMode Selector to a mode other than theSNOW mode, then turn on the dynamicdriver assistance switch.)For details about the INFINITI DriveMode Selector, see “INFINITI DriveMode Selector” (P.5-21).

. When the VDC system is off (To use theDCA system, turn on the VDC, thenpush the dynamic driver assistanceswitch.)For details about the VDC system, see“Vehicle Dynamic Control (VDC) sys-tem” (P.5-108).

. When ABS or VDC (including the trac-tion control system) is operating

When the Conventional (fixed speed) cruisecontrol mode is operating, the DCA systemwill not operate. (To use the DCA system,turn the Conventional (fixed speed) cruisecontrol mode off, then push the dynamicdriver assistance switch.)

For details about the Conventional (fixedspeed) cruise control mode, see “Intelli-gent Cruise Control (ICC) system” (P.5-58).

When the hybrid system is turned off, theDCA system is automatically turned off.

JVS0244X

1. System set display with a vehicleahead

2. System set display without a vehicleahead

3. System set display with a vehicleahead (brake operation is necessary)

System operation

WARNING

The Distance Control Assist (DCA) systemautomatically decelerates your vehicle tohelp assist the driver to maintain a follow-ing distance from the vehicle ahead. Manu-

ally brake when deceleration is required tomaintain a safe distance upon suddenbraking by the vehicle ahead or when avehicle suddenly appears in front of you.Always stay alert when using the DCAsystem.

The Distance Control Assist (DCA) systemhelps assist the driver to keep a followingdistance to the vehicle ahead by brakingand moving the accelerator pedal upwardin the normal driving condition.

Starting and driving 5-85

Page 271: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-86 Starting and driving

When a vehicle ahead is detected:

The vehicle ahead detection indicatorcomes on.

When the vehicle approaches a vehicleahead:

. If the driver’s foot is not on theaccelerator pedal, the system activatesthe brakes to decelerate smoothly asnecessary. If the vehicle ahead comesto a stop, the vehicle decelerates to astandstill within the limitations of thesystem.

. If the driver’s foot is on the acceleratorpedal, the system moves the accelera-tor pedal upward to assist the driver torelease the accelerator pedal.

When brake operation by driver is re-quired:

The system alerts the driver by a warningchime and blinking the vehicle aheaddetection indicator. If the driver’s foot ison the accelerator pedal after the warning,the system moves the accelerator pedalupward to assist the driver to switch to thebrake pedal.

The stoplights of the vehicle come onwhen braking is performed by the DCAsystem.

When the brake operates, a noise may beheard. This is not a malfunction.

WARNING

. When the vehicle ahead detection in-dicator is not illuminated, system willnot control or warn the driver.

. Depending on the position of the accel-erator pedal, the system may not be ableto assist the driver to release theaccelerator pedal appropriately.

. If the vehicle ahead comes to a stand-still, the vehicle decelerates to a stand-still within the limitations of the system.The system will release brake controlwith a warning chime once it judges thevehicle is at a standstill. To prevent thevehicle from moving, the driver mustdepress the brake pedal. (The systemwill resume control automatically oncethe system reaches 3 MPH (5 km/h)).

Overriding the system:

The following driver’s operation overridesthe system operation.

. When the driver depresses the accel-erator pedal even further while thesystem is moving the accelerator pedalupward, the DCA system control of theaccelerator pedal is canceled.

. When the driver’s foot is on the accel-erator pedal, the brake control by thesystem is not operated.

. When the driver’s foot is on the brakepedal, neither the brake control nor thealert by the system operates.

. When the Intelligent Cruise Control (ICC)system is set, the DCA system will becancelled.

Approach warningIf your vehicle comes closer to the vehicleahead due to rapid deceleration of thatvehicle or if another vehicle cuts in, thesystem warns the driver with the chimeand DCA system display. Decelerate bydepressing the brake pedal to maintain asafe vehicle distance if:

. The chime sounds.

. The vehicle ahead detection indicatorblinks.

Page 272: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. The driver assist system forward indi-cator (orange) blinks.

. When the vehicles are traveling at thesame speed and the distance betweenvehicles is not changing

. When the vehicle ahead is travelingfaster and the distance between vehi-cles is increasing

. When a vehicle cuts in near your vehicleThe driver assist system forward indicator(orange) blinks and the warning chime willnot sound when your vehicle approachesvehicles that are parked or moving slowly. SSD0284A

NOTE:

The approach warning chime may soundand the driver assist system forwardindicator (orange) may blink when theradar sensor detects objects on the side ofthe vehicle *A or on the side of the road*A . This may cause the DCA system todecelerate or accelerate the vehicle. Theradar sensor may detect these objectswhen the vehicle is driven on windingroads, narrow roads, hilly roads or whenentering or exiting a curve. In these casesyou will have to manually control theproper distance ahead of your vehicle.

Also, the sensor sensitivity can be affected

by vehicle operation (steering maneuver ordriving position in the lane) or traffic orvehicle condition (for example, if a vehicleis being driven with some damage).

Automatic cancellationCondition A:

Under the following conditions, the Dis-tance Control Assist (DCA) system isautomatically canceled. The chime willsound and the “currently unavailable”warning message will appear in the vehicleinformation display. The system will not beable to be set.

. When the VDC system is turned off

. When the VDC or ABS (including thetraction control system) operates

. When the INFINITI Drive Mode Selectoris turned to the SNOW mode

. When the radar signal is temporarilyinterrupted.

Action to take:

When the conditions listed above are nolonger present, turn the DCA system backon to use the system.

Condition B:

When the radar sensor area of the frontbumper is covered with dirt or is ob-

Starting and driving 5-87

Page 273: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-88 Starting and driving

structed, making it impossible to detect avehicle ahead, the DCA system is auto-matically canceled.

The chime will sound, the driver assistsystem forward indicator (orange) and the“front radar obstruction” warning messagewill appear in the vehicle informationdisplay.

Action to take:

If the driver assist system forward indicator(orange) and the warning message appear,park the vehicle in a safe place, turn thehybrid system off. When the radar signal istemporarily interrupted, clean the sensorarea of the front bumper and restart thehybrid system. If the warning messagecontinues to be displayed, have the DCAsystem checked by an INFINITI retailer.

Condition C:

When the DCA system is not operatingproperly, the chime sounds, the driverassist system forward indicator (orange)and the system “malfunction” warningmessage will appear in the vehicle infor-mation display.

Action to take:

If the driver assist system forward indicator(orange) and the warning message appear,park the vehicle in a safe place. Turn thehybrid system off, restart the hybridsystem, and turn on the DCA system again.

If it is not possible to set the system or theindicator stays on, it may indicate that thesystem is malfunctioning. Although thevehicle is still driveable under normalconditions, have the vehicle checked atan INFINITI retailer.

Sensor maintenanceThe radar sensor for the DCA system iscommon with the Intelligent Cruise Control(ICC) system and is located behind thelower grille of the front bumper.

For the radar sensor maintenance, see“Sensor maintenance” (P.5-74).

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

1. This device may not cause harmfulinterference, and

2. This device must accept any interfer-ence received, including interferencethat may cause undesired operation.

FCC Warning

Changes or modification not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with Industry Canadalicence-exempt RSS standard(s). Operationis subject to the following two conditions:

1. This device may not cause interference,and

2. This device must accept any interfer-ence, including interference that maycause undesired operation of the de-vice.

Page 274: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The forward emergency braking system canassist the driver when there is a risk of aforward collision with the vehicle ahead inthe traveling lane.

JVS0235X

The forward emergency braking systemuses a radar sensor *A located behindthe lower grille of the front bumper tomeasure the distance to the vehicle aheadin the traveling lane.

The forward emergency braking systemoperates at speeds above approximately3 MPH (5 km/h). If there is a risk of acollision, the forward emergency brakingsystem issues a visual and audible warn-ing and pushes the accelerator pedal up. Ifthe driver releases the accelerator pedal,then the forward emergency braking sys-tem applies partial braking. If the driverdoes not take action, the forward emer-

gency braking system issues the secondvisual and audible warning, and appliesharder braking.

WARNING

. The forward emergency braking systemis a supplemental aid to the driver. It isnot a replacement for the driver’s atten-tion to traffic conditions or responsibilityto drive safely. It cannot prevent acci-dents due to carelessness or dangerousdriving techniques.

. The forward emergency braking systemdoes not function in all driving, traffic,weather and road conditions.

Starting and driving 5-89

FORWARD EMERGENCY BRAKING SYSTEM(if so equipped)

Page 275: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-90 Starting and driving

JVS0312X

1. Driver assist system forward indicator

2. Vehicle ahead detection indicator

SYSTEM OPERATIONThe forward emergency braking system willfunction when your vehicle is driven atspeeds above approximately 3 MPH (5km/h).

If a risk of a forward collision is detected,the forward emergency braking system willprovide the first warning to the driver byflashing the driver assist system forwardindicator (orange) and the vehicle aheaddetection indicator (orange), and providingan audible warning. In addition, the

forward emergency braking system pushesthe accelerator pedal up. If the driverreleases the accelerator pedal, then thesystem applies partial braking.

If the driver applies the brakes quickly andforcefully after the warning, and theforward emergency braking system detectsthat there is still the possibility of aforward collision, the system will automa-tically increase the braking force.

If a forward collision is imminent and thedriver does not take action, the forwardemergency braking system issues thesecond visual (red) and audible warningand automatically applies harder braking.

NOTE:

The vehicle’s stop lights come on whenbraking is performed by the forwardemergency braking system.

Depending on vehicle speed and distanceto the vehicle ahead, as well as driving androadway conditions, the system may helpthe driver avoid a forward collision or mayhelp mitigate the consequences if a colli-sion should one be unavoidable.

If the driver is handling the steering wheel,accelerating or braking, the forward emer-gency braking system will function later orwill not function.

The automatic braking will cease under thefollowing conditions:

. When the steering wheel is turned asfar as necessary to avoid a collision.

. When the accelerator pedal is de-pressed.

. When there is no longer a vehicledetected ahead.

If the forward emergency braking systemhas stopped the vehicle, the vehicle willremain at a standstill for approximately 2seconds before the brakes are released.

Page 276: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

. The radar sensor does not detect thefollowing objects:

— Pedestrians, animals or obstacles inthe roadway

— Oncoming vehicles

— Crossing vehicles

. The radar sensor has some performancelimitations. For stationary vehicles, theforward emergency braking system willnot function when the vehicle is drivenat speeds over approximately 45 MPH(70 km/h).

. The radar sensor may not detect avehicle ahead in the following condi-tions:

— Dirt, ice, snow or other materialcovering the radar sensor.

— Interference by other radar sources.

— Snow or road spray from travelingvehicles.

— If the vehicle ahead is narrow (e.g.motorcycle)

— When driving on a steep downhillslope or roads with sharp curves.

. In some road or traffic conditions, theforward emergency braking system mayunexpectedly push the accelerator pedalup or apply partial braking. When accel-eration is necessary, continue to depressthe accelerator pedal to override thesystem.

. Braking distances increase on slipperysurfaces.

. Excessive noise will interfere with thewarning chime sound, and the chimemay not be heard.

JVS0246X

Turning the forward emergencybraking system ON/OFFPerform the following steps to turn theforward emergency braking system on oroff.

1. Push the MENU button *1 and touch[Driver Assistance] on the lower dis-play.

2. Touch [Emergency Assist].

3. Touch [Forward emergency braking] toturn the system ON/OFF.

Starting and driving 5-91

Page 277: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-92 Starting and driving

JVS0299X

Forward emergency braking system warn-ing light (orange)

When the forward emergency brakingsystem is turned off, the forward emer-gency braking system warning light (or-ange) will illuminate.

The forward emergency braking system willremain ON or OFF unless the setting ischanged on the lower display. This settingis also linked with the log-in function. (See“Log-in function” (P.3-14) and the InfinitiInTouch Owner’s Manual for the log-infunction.)

NOTE:

When the forward emergency brakingsystem setting is turned ON or OFF, thepredictive forward collision warning sys-tem is also turned ON or OFF simulta-neously.

System temporarily unavailableCondition A:

When the radar sensor picks up interfer-ence from another radar source, making itimpossible to detect a vehicle ahead, theforward emergency braking system isautomatically turned off. The forwardemergency braking system warning light(orange) and the driver assist systemforward indicator (orange) will illuminate.

Action to take:

When the above conditions no longer exist,the forward emergency braking system willresume automatically.

Condition B:

When the sensor area of the front bumperis covered with dirt or is obstructed,making it impossible to detect a vehicleahead, the forward emergency brakingsystem is automatically turned off. Theforward emergency braking system warn-

ing light (orange) will illuminate and the“front radar obstruction” warning messagewill appear in the vehicle informationdisplay.

Action to take:

If the warning light (orange) comes on,park the vehicle in a safe place, and turnthe hybrid system off. Clean the radarcover on lower grille with a soft cloth, andrestart the hybrid system. If the warninglight continues to illuminate, have theforward emergency braking systemchecked by an INFINITI retailer.

Condition C:

When the accelerator pedal actuator de-tects that the internal motor temperature ishigh, the forward emergency braking sys-tem is automatically turned off. The for-ward emergency braking system warninglight (orange) and the driver assist systemforward indicator (orange) will illuminateand the “Unavailable High AcceleratorTemperature” warning message will appearin the vehicle information display.

Action to take:

When the above conditions no longer exist,the forward emergency braking system willresume automatically.

Page 278: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

System malfunctionIf the forward emergency braking systemmalfunctions, it will be turned off auto-matically, a chime will sound, the forwardemergency braking system warning light(orange) and the driver assist systemforward indicator (orange) will illuminateand the system “malfunction” warningmessage will appear in the vehicle infor-mation display.

Action to take:

If the warning light (orange) comes on,park the vehicle in a safe location, turn thehybrid system off and restart the hybridsystem. If the warning light continues toilluminate, have the forward emergencybraking system checked by an INFINITIretailer.

Sensor maintenanceFor the radar sensor maintenance, see“Sensor maintenance” (P.5-74).

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

1. This device may not cause harmfulinterference, and

2. This device must accept any interfer-ence received, including interferencethat may cause undesired operation.

FCC Warning

Changes or modification not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with Industry Canadalicence-exempt RSS standard(s). Operationis subject to the following two conditions:

1. This device may not cause interference,and

2. This device must accept any interfer-ence, including interference that maycause undesired operation of the de-vice.

Starting and driving 5-93

Page 279: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-94 Starting and driving

JVS0294X

The predictive forward collision warningsystem can help alert the driver when thereis a sudden braking of a second vehicletraveling in front of the vehicle ahead inthe traveling same lane.

JVS0235X

JVS0225X

PREDICTIVE FORWARD COLLISIONWARNING SYSTEM (if so equipped)

Page 280: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

1. Driver assist system forward indicator

2. Vehicle ahead detection indicator

SYSTEM OPERATIONThe predictive forward collision warningsystem uses a radar sensor *A locatedbehind the front bumper to measure thedistance to a second vehicle ahead in thetraveling lane. The predictive forward colli-sion warning system operates at speedsabove approximately 3 MPH (5 km/h). Ifthere is a potential risk of a forwardcollision, the predictive forward collisionwarning system will warn the driver byblinking the driver assist system forwardindicator and the vehicle ahead detectionindicator, and sounding a warning tone.

JVS0295X

Precautions on the predictive for-ward collision warning system

WARNING

. The predictive forward collision warningsystem is designed to warn you before acollision but will not avoid a collision. Itis the driver’s responsibility to stayalert, drive safely and be in control ofthe vehicle at all times.

. The radar sensor does not detect thefollowing objects:

— Pedestrians, animals or obstacles inthe roadway

— Oncoming vehicles

— Crossing vehicles

. The predictive forward collision warningsystem does not function when a vehicleahead is a narrow vehicle, such as amotorcycle.

. The radar sensor may not detect asecond vehicle ahead in the followingconditions:

— Snow or heavy rain

— Dirt, ice, snow or other materialcovering the radar sensor

— Interference by other radar sources

— Snow or road spray from travelingvehicles is splashed

— Driving in a tunnel

Starting and driving 5-95

Page 281: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-96 Starting and driving

JVS0296X

JVS0297X

WARNING

. The radar sensor may not detect asecond vehicle when the vehicle aheadis being towed.

. When the distance to the vehicle aheadis too close, the beam of the radarsensor is obstructed.

Page 282: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0298X

WARNING

. The radar sensor may not detect asecond vehicle when driving on a steepdownhill slope or on roads with sharpcurves.

. Excessive noise will interfere with thewarning tone sound, and it may not beheard.

NOTE:

When the forward emergency brakingsystem setting is turned ON or OFF, the

predictive forward emergency warningsystem is also turned ON or OFF simulta-neously.

JVS0299X

Forward emergency braking system warn-ing light (orange)

System temporarily unavailableCondition A:

When the radar sensor picks up interfer-ence from another radar source, making itimpossible to detect a vehicle ahead, thepredictive forward collision warning sys-tem is automatically turned off. The for-ward emergency braking system warninglight (orange) and the driver assist systemforward indicator (orange) will illuminate.

Starting and driving 5-97

Page 283: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-98 Starting and driving

Action to take:

When the above conditions no longer exist,the predictive forward collision warningsystem will resume automatically.

Condition B:

When the sensor area of the front bumperis covered with dirt or is obstructed,making it impossible to detect a vehicleahead, the predictive forward collisionwarning system is automatically turnedoff. The forward emergency braking systemwarning light (orange) and the driver assistsystem forward indicator (orange) willilluminate and the “front radar obstruc-tion” warning message will appear in thevehicle information display.

Action to take:

If the warning light (orange) comes on,park the vehicle in a safe place, and turnthe hybrid system off. Clean the radarcover on lower grille with a soft cloth, andrestart the hybrid system. If the warninglight continues to illuminate, have thepredictive forward collision warning sys-tem checked by an INFINITI retailer.

System malfunctionIf the predictive forward collision warningsystem malfunctions, it will be turned offautomatically, a chime will sound, theforward emergency braking system warn-ing light (orange) and the driver assistsystem forward indicator (orange) willilluminate, and the system malfunctionmessage will appear in the vehicle infor-mation display.

Action to take:

If the warning light (orange) illuminates,park the vehicle in a safe location, turn thehybrid system off and restart the hybridsystem. If the warning light continues toilluminate, have the predictive forwardcollision warning system checked by anINFINITI retailer.

Sensor maintenanceFor the radar sensor maintenance, see“Sensor maintenance” (P.5-74).

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions:

1. This device may not cause harmfulinterference, and

2. This device must accept any interfer-ence received, including interferencethat may cause undesired operation.

FCC Warning

Changes or modification not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with Industry Canadalicence-exempt RSS standard(s). Operationis subject to the following two conditions:

1. This device may not cause interference,and

2. This device must accept any interfer-ence, including interference that maycause undesired operation of the de-vice.

Page 284: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

CAUTION

During the first 1,200 miles (2,000 km),follow these recommendations to obtainmaximum engine performance and ensurethe future reliability and economy of yournew vehicle.

Failure to follow these recommendationsmay result in shortened engine life andreduced engine performance.

. Avoid driving for long periods at con-stant speed, either fast or slow. Do notrun the engine over 4,000 rpm.

. Do not accelerate at full throttle in anygear.

. Avoid quick starts.

. Avoid hard braking as much as possi-ble.

Follow these easy-to-use Fuel EfficientDriving Tips to help you achieve the mostfuel economy from your vehicle.

1. Use smooth accelerator and brakepedal application.. Avoid rapid starts and stops.. Use smooth, gentle accelerator and

brake application whenever possi-ble.

. Maintain constant speed while com-muting and coast whenever possi-ble.

2. Maintain constant speed.. Look ahead to try and anticipate and

minimize stops.. Synchronizing your speed with traf-

fic lights allows you to reduce yournumber of stops.

. Maintaining a steady speed canminimize red light stops and im-prove fuel efficiency.

3. Use air conditioning (A/C) at highervehicle speeds.. Below 40 MPH (64 km/h), it is more

efficient to open windows to cool thevehicle due to reduced engine load.

. Above 40 MPH (64 km/h), it is moreefficient to use A/C to cool thevehicle due to increased aerody-

namic drag.. Recirculating the cool air in the cabin

when the A/C is on reduces coolingload.

4. Drive at economical speeds and dis-tances.. Observing the speed limit and not

exceeding 60 MPH (97 km/h) (wherelegally allowed) can improve fuelefficiency due to reduced aerody-namic drag.

. Maintaining a safe following dis-tance behind other vehicles reducesunnecessary braking.

. Safely monitoring traffic to antici-pate changes in speed permitsreduced braking and smooth accel-eration changes.

. Select a gear range suitable to roadconditions.

5. Use cruise control.. Using cruise control during highway

driving helps maintain a steadyspeed.

. Cruise control is particularly effec-tive in providing fuel savings whendriving on flat terrains.

Starting and driving 5-99

BREAK-IN SCHEDULE FUEL EFFICIENT DRIVING TIPS

Page 285: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-100 Starting and driving

6. Plan for the shortest route.. Utilize a map or navigation system to

determine the best route to savetime.

7. Avoid idling.. Shutting off your engine when safe

for stops exceeding 30-60 secondssaves fuel and reduces emissions.

8. Buy an automated pass for toll roads.. Automated passes permit drivers to

use special lanes to maintain cruis-ing speed through the toll and avoidstopping and starting.

9. Winter warm up.. Limit idling time to minimize impact

to fuel economy.. Vehicles typically need no more than

30 seconds of idling at start-up toeffectively circulate the engine oilbefore driving.

. Your vehicle will reach its idealoperating temperature more quicklywhile driving versus idling.

10.Keeping your vehicle cool.. Park your vehicle in a covered

parking area or in the shade when-ever possible.

. When entering a hot vehicle, open-ing the windows will help to reducethe inside temperature faster, result-ing in reduced demand on your A/Csystem.

. Keep your engine tuned up.

. Follow the recommended scheduledmaintenance.

. Keep the tires inflated to the correctpressure. Low tire pressure increasestire wear and lowers fuel economy.

. Keep the wheels in correct alignment.Improper alignment increases tire wearand lowers fuel economy.

. Use the recommended viscosity engineoil. (See “Engine oil and oil filterrecommendation” (P.9-6).)

INCREASING FUEL ECONOMY

Page 286: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

If any malfunction occurs in the IntelligentAll-Wheel Drive (AWD) system while theINFINITI Direct Response Hybrid® System isrunning, warning messages appear in thevehicle information display.

JVS0228M

If the “AWD Error” warning *1 appears,there may be a malfunction in the Intelli-gent AWD system. Reduce vehicle speedand have your vehicle checked by anINFINITI retailer as soon as possible.

The “AWD High Temp.” (high temperature)warning*2 may appear while trying to free

a stuck vehicle due to increased oiltemperature. The driving mode may changeto Two-Wheel Drive (2WD). If this warningis displayed, stop the vehicle with thehybrid system idling, as soon as it is safeto do so. Then if the warning turns off, youcan continue driving.

The “Tire Size Incorrect” warning *3 mayappear if there is a large differencebetween the diameters of front and rearwheels. Pull off the road in a safe area,with the hybrid system idling. Check thatall tire sizes are the same, that the tirepressure is correct and that the tires arenot excessively worn.

If any warning message continues to bedisplayed, have your vehicle checked by anINFINITI retailer as soon as possible.

WARNING

. For AWD equipped vehicles, do notattempt to raise two wheels off theground and shift the transmission toany drive or reverse position with thehybrid system running. Doing so mayresult in drivetrain damage or unex-pected vehicle movement which couldresult in serious vehicle damage or

Starting and driving 5-101

INTELLIGENT ALL-WHEEL DRIVE (AWD) (if soequipped)

Page 287: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-102 Starting and driving

personal injury.

. Do not attempt to test an AWD equippedvehicle on a 2-wheel dynamometer (suchas the dynamometers used by somestates for emissions testing) or similarequipment even if the other two wheelsare raised off the ground. Make sure thatyou inform the test facility personnelthat your vehicle is equipped with AWDbefore it is placed on a dynamometer.Using the wrong test equipment mayresult in drivetrain damage or unex-pected vehicle movement which couldresult in serious vehicle damage orpersonal injury.

CAUTION

. Do not operate the hybrid system on afree roller when any of the wheels areraised.

. If the “AWD Error” warning appearswhile driving there may be a malfunctionin the AWD system. Reduce the vehiclespeed and have your vehicle checked byan INFINITI retailer as soon as possible.

. If the “AWD Error” warning remains onafter the above operation, have yourvehicle checked by an INFINITI retailer assoon as possible.

. The power train may be damaged if youcontinue driving with the “AWD Error”warning on.

Page 288: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SD1006MA

WARNING

. Do not stop or park the vehicle overflammable materials such as dry grass,waste paper or rags. They may ignite andcause a fire.

. Never leave the INFINITI Direct ResponseHybrid® System in the READY to drivemode while the vehicle is unattended.

. Do not leave children unattended insidethe vehicle. They could unknowinglyactivate switches or controls. Unat-tended children could become involved

in serious accidents.

. Safe parking procedures require thatboth the parking brake be applied andthe transmission placed into P (Park).Failure to do so could cause the vehicleto move unexpectedly or roll away andresult in an accident.

. Make sure the automatic transmissionshift lever has been pushed as farforward as it can go and cannot bemoved without depressing the footbrake pedal.

1. Firmly apply the parking brake.

2. Move the shift lever to the P (Park)position.

3. To help prevent the vehicle from rollinginto the street when parked on asloping drive way, it is a good practiceto turn the wheels as illustrated.. HEADED DOWNHILL WITH CURB: *1

Turn the wheels into the curb andmove the vehicle forward until thecurb side wheel gently touches thecurb.

. HEADED UPHILL WITH CURB: *2Turn the wheels away from the curband move the vehicle back until thecurb side wheel gently touches thecurb.

. HEADED UPHILL OR DOWNHILL, NOCURB: *3Turn the wheels toward the side ofthe road so the vehicle will moveaway from the center of the road if itmoves.

4. Push the ignition switch to the OFFposition.

Starting and driving 5-103

PARKING/PARKING ON HILLS

Page 289: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-104 Starting and driving

DIRECT ADAPTIVE STEERING TYPE

WARNING

When the power steering warning lightilluminates with the INFINITI Direct Re-sponse Hybrid® System running, the powerassist for the steering will cease operation.You will still have control of the vehicle, butthe steering will be harder to operate.

CAUTION

. If wheels or tires other than the INFINITIrecommended ones are used, the directadaptive steering system may not oper-ate properly and the power steeringwarning light may illuminate.

. Do not modify the vehicle’s suspension.If suspension parts such as shockabsorbers, struts, springs, stabilizerbars, bushings and wheels are notINFINITI recommended for your vehicleor are extremely deteriorated, the directadaptive steering system may not oper-ate properly and the power steeringwarning light may illuminate.

. Do not modify the vehicle’s steering. Ifsteering parts are not INFINITI recom-mended for your vehicle or are extremelydeteriorated, the direct adaptive steer-ing system may not operate properly andthe power steering warning light mayilluminate.

. If the VDC warning light illuminates, thepower steering warning light may alsoilluminate at the same time. Stop thevehicle in a safe location, turn the hybridsystem off and restart the hybrid sys-tem. If the power steering warning lightcontinues to illuminate, have the systemchecked by an INFNITI retailer. For theVDC system, see “Vehicle Dynamic Con-trol (VDC) system” (P.5-108).

. Do not place the ignition switch is in theON position while the steering wheel ora tire is removed.

. Do not turn the steering wheel as muchas possible while the ignition switch isin any position other than the ONposition.

. Installing an accessory on the steeringwheel, or changing the steering wheel,may reduce the steering performance.

The direct adaptive steering system isdesigned to control the steering force andsteering angle according to the vehiclespeed and amount of turning of thesteering wheel.

The steering characteristic can be selectedwith the INFINITI Drive Mode Selector. See“INFINITI Drive Mode Selector” (P.5-21).

When the steering wheel is operatedrepeatedly or continuously while parkingor driving at a very low speed, the powerassist for the steering wheel will bereduced and the steering wheel may beslightly turned even when driving on astraight road. This is to prevent overheat-ing of the direct adaptive steering systemand protect it from getting damaged. Whenthe temperature of the direct adaptivesteering system cools down, the powerassist level will return to normal. Avoidrepeating steering wheel operations thatcould cause the direct adaptive steeringsystem to overheat.

If the power steering warning light illumi-nates while the hybrid system is running, itmay indicate that the direct adaptivesteering system is not functioning properlyand may need servicing. Have the systemchecked by an INFINITI retailer. (See

POWER STEERING

Page 290: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

“Power steering warning light” (P.2-17).)

When the power steering warning lightilluminates with the hybrid system run-ning, the power assist for the steering willcease operation. You will still have controlof the vehicle. However, greater steeringeffort will be needed, especially in sharpturns and at low speeds.

If the direct adaptive steering system ismalfunctioning, the steering wheel mayturn slightly even when driving on astraight road.

Under the following conditions, the steer-ing wheel may turn slightly even whendriving on a straight road. This is due to aprotection mechanism for the direct adap-tive steering system.

. When the battery is discharged

. When the hybrid system is stalled

. After the vehicle is tested on the four-wheel dynamometer

. When the steering wheel is held in thefull lock position or when the front tiretouches an obstruction.

The steering wheel will return to thenormal position after the protection me-chanism deactivates. To return to thenormal position, turn the hybrid system

off, restart the hybrid system, and thendrive the vehicle for a period of time.

When the vehicle is tested on the 2-wheeldynamometer, the power steering warninglight may illuminate. To turn off the powersteering warning light, stop the vehicle in asafe location, turn the hybrid system off,restart the hybrid system, and then drivethe vehicle for a period of time.

The following conditions do not indicate amalfunction of the direct adaptive steeringsystem.

. You may notice wider steering playwhen the ignition switch is in the OFFor ACC position compared to when it isin the ON position.

. After the hybrid system is started, thesteering wheel may turn slightly evenwhen driving on a straight road. Toreturn to the normal position, drive thevehicle on a straight road for a periodof time.

. After the hybrid system is started, thesteering wheel may move if the steeringwheel was turned to the fully lockedposition while the ignition switch wasin the OFF position.

You may hear a noise under the followingconditions. However, this is not a malfunc-

tion.

. When the hybrid system is started orstopped.

. When the steering wheel is turned inthe full lock position.

Starting and driving 5-105

Page 291: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-106 Starting and driving

BRAKING PRECAUTIONSThis vehicle is equipped with two brakingsystems.

. Hydraulic brake system

. Regenerative brake system

Hydraulic brake systemThe brake system has two separate hy-draulic circuits. If one circuit malfunctions,you will still have braking at two wheels.

Regenerative brake systemSee “Regenerative brake” (P.Hybrid Sys-tem-8).

Using the brakesAvoid resting your foot on the brake pedalwhile driving. This will cause overheatingof the brakes, wearing out the brake andpads faster and reduce gas mileage.

To help save the brakes and to prevent thebrakes from overheating, reduce speedand downshift to a lower gear before goingdown a slope or long grade. Overheatedbrakes may reduce braking performanceand could result in loss of vehicle control.

WARNING

. While driving on a slippery surface, becareful when braking, accelerating ordownshifting. Abrupt braking or accel-erating could cause the wheels to skidand result in an accident.

. If the INFINITI Direct Response Hybrid®

System is not running or is turned offwhile driving, the power assist for thebrakes will be limited. Braking will beharder.

CAUTION

You may hear a operational noise when thebrake pedal is depressed. This is not amalfunction.

Wet brakesWhen the vehicle is washed or driventhrough water, the brakes may get wet.As a result, your braking distance will belonger and the vehicle may pull to one sideduring braking.

To dry brakes, drive the vehicle at a safe

speed while lightly tapping the brake pedalto heat-up the brakes. Do this until thebrakes return to normal. Avoid driving thevehicle at high speeds until the brakesfunction correctly.

PARKING BRAKE BREAK-INBreak in the parking brake shoes wheneverthe stopping effect of the parking brake isweakened or whenever the parking brakeshoes and/or drums/rotors are replaced,in order to assure the best brakingperformance.

This procedure is described in the vehicleservice manual and can be performed byan INFINITI retailer.

BRAKE SYSTEM

Page 292: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

BRAKE ASSISTWhen the force applied to the brake pedalexceeds a certain level, the Brake Assist isactivated generating greater braking forcethan a conventional brake booster evenwith light pedal force.

WARNING

The Brake Assist is only an aid to assistbraking operation and is not a collisionwarning or avoidance device. It is thedriver’s responsibility to stay alert, drivesafely and be in control of the vehicle at alltimes.

ANTI-LOCK BRAKING SYSTEM (ABS)

WARNING

. The Anti-lock Braking System (ABS) is asophisticated device, but it cannot pre-vent accidents resulting from careless ordangerous driving techniques. It canhelp maintain vehicle control duringbraking on slippery surfaces. Rememberthat stopping distances on slipperysurfaces will be longer than on normal

surfaces even with ABS. Stopping dis-tances may also be longer on rough,gravel or snow covered roads, or if youare using tire chains. Always maintain asafe distance from the vehicle in front ofyou. Ultimately, the driver is responsiblefor safety.

. Tire type and condition may also affectbraking effectiveness.

— When replacing tires, install thespecified size of tires on all fourwheels.

— For detailed information, see“Wheels and tires” (P.8-30) of thismanual.

The Anti-lock Braking System (ABS) con-trols the brakes so the wheels do not lockduring hard braking or when braking onslippery surfaces. The system detects therotation speed at each wheel and variesthe brake fluid pressure to prevent eachwheel from locking and sliding. By pre-venting each wheel from locking, thesystem helps the driver maintain steeringcontrol and helps to minimize swervingand spinning on slippery surfaces.

Using the systemDepress the brake pedal and hold it down.Depress the brake pedal with firm steadypressure, but do not pump the brakes. TheABS will operate to prevent the wheelsfrom locking up. Steer the vehicle to avoidobstacles.

WARNING

Do not pump the brake pedal. Doing so mayresult in increased stopping distances.

Self-test featureThe ABS includes electronic sensors, elec-tric pumps, hydraulic solenoids and acomputer. The computer has a built-indiagnostic feature that tests the systemeach time you start the hybrid system andmove the vehicle at a low speed in forwardor reverse. When the self-test occurs, youmay hear a “clunk” noise and/or feel apulsation in the brake pedal. This is normaland does not indicate a malfunction. If thecomputer senses a malfunction, it switchesthe ABS off and illuminates the ABSwarning light on the instrument panel.The brake system then operates normally,

Starting and driving 5-107

BRAKE ASSIST

Page 293: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-108 Starting and driving

but without anti-lock assistance.

If the ABS warning light illuminates duringthe self-test or while driving, have thevehicle checked by an INFINITI retailer.

Normal operationThe ABS operates at speeds above 3 to 6MPH (5 to 10 km/h).

When the ABS senses that one or morewheels are close to locking up, the actuatorrapidly applies and releases hydraulicpressure. This action is similar to pumpingthe brakes very quickly. You may feel apulsation in the brake pedal and hear anoise from under the hood or feel avibration from the actuator when it isoperating. This is normal and indicatesthat the ABS is operating properly. How-ever, the pulsation may indicate that roadconditions are hazardous and extra care isrequired while driving.

The Vehicle Dynamic Control (VDC) systemuses various sensors to monitor driverinputs and vehicle motion. Under certaindriving conditions, the VDC system helpsto perform the following functions.

. Controls brake pressure to reducewheel slip on one slipping drive wheelso power is transferred to a nonslipping drive wheel on the same axle.

. Controls brake pressure and engine ormotor output to reduce drive wheel slipbased on vehicle speed (traction con-trol function).

. Controls brake pressure at individualwheels and engine or motor output tohelp the driver maintain control of thevehicle in the following conditions:— understeer (vehicle tends to not

follow the steered path despiteincreased steering input)

— oversteer (vehicle tends to spin dueto certain road or driving condi-tions).

The VDC system can help the driver tomaintain control of the vehicle, but itcannot prevent loss of vehicle control inall driving situations.

When the VDC system operates, the VDCwarning light in the instrument panel

flashes so note the following:

. The road may be slippery or the systemmay determine some action is requiredto help keep the vehicle on the steeredpath.

. You may feel a pulsation in the brakepedal and hear a noise or vibrationfrom under the hood. This is normaland indicates that the VDC system isworking properly.

. Adjust your speed and driving to theroad conditions.

See “Vehicle Dynamic Control (VDC) warn-ing light” (P.2-18).

If a malfunction occurs in the system, theVDC warning light illuminates in theinstrument panel. The VDC system auto-matically turns off.

The VDC OFF switch is used to turn off theVDC system. The VDC off indicator lightilluminates to indicate the VDC system isoff. When the VDC switch is used to turn offthe system, the VDC system still operatesto prevent one drive wheel from slipping bytransferring power to a non slipping drivewheel. The VDC warning light flashes ifthis occurs. All other VDC functions are off,except for rise-up and build-up, and brakeforce distribution, and the VDC warning

VEHICLE DYNAMIC CONTROL (VDC) SYSTEM

Page 294: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

light will not flash. The VDC system isautomatically reset to on when the ignitionswitch is placed in the off position thenback to the on position.

See “Vehicle Dynamic Control (VDC) warn-ing light” (P.2-18) and “Vehicle DynamicControl (VDC) off indicator light” (P.2-20).

The computer has a built-in diagnosticfeature that tests the system each time youstart the INFINITI Direct Response Hybrid®

System and move the vehicle forward or inreverse at a slow speed. When the self-testoccurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. Thisis normal and is not an indication of amalfunction.

RISE-UP AND BUILD-UPThe system gradually adjusts brakingpower during normal braking to helpprovide an enhanced brake feel.

BRAKE FORCE DISTRIBUTIONDuring braking while driving through turns,the system optimizes the distribution offorce to each of the four wheels dependingon the radius of the turn.

WARNING

. The VDC system is designed to help thedriver maintain stability but does notprevent accidents due to abrupt steeringoperation at high speeds or by carelessor dangerous driving techniques. Reducevehicle speed and be especially carefulwhen driving and cornering on slipperysurfaces and always drive carefully.

. The rise-up and build-up, and brake forcedistribution system may not be effectivedepending on the driving condition.Always drive carefully and attentively.

. Do not modify the vehicle’s suspension.If suspension parts such as shockabsorbers, struts, springs, stabilizerbars, bushings and wheels are notINFINITI recommended for your vehicleor are extremely deteriorated, the VDCsystem may not operate properly. Thiscould adversely affect vehicle handling

performance, and the VDC warning lightmay illuminate.

. If brake related parts such as brakepads, rotors and calipers are not INFINITIrecommended or are extremely deterio-rated, the VDC system may not operateproperly and the VDC warning lightmay illuminate.

. If engine control related parts are notINFINITI recommended or are extremelydeteriorated, the VDC warning lightmay illuminate.

. When driving on extremely inclinedsurfaces such as higher banked corners,the VDC system may not operate prop-erly and the VDC warning light mayilluminate. Do not drive on these typesof roads.

. When driving on an unstable surfacesuch as a turntable, ferry, elevator orramp, the VDC warning light mayilluminate. This is not a malfunction.Restart the hybrid system after drivingonto a stable surface.

. If wheels or tires other than the INFINITIrecommended ones are used, the VDCsystem may not operate properly andthe VDC warning light may illumi-

Starting and driving 5-109

Page 295: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-110 Starting and driving

nate.

. The VDC system is not a substitute forwinter tires or tire chains on a snowcovered road.

This system senses driving based on thedriver’s steering and acceleration/brakingpatterns, and controls brake pressure atindividual wheels and hybrid system out-put to help smooth vehicle response.

When the SPORT mode is selected by theINFINITI Drive Mode Selector, the amount ofbrake control provided by the active tracecontrol is reduced.

When the PERSONAL mode is selected, theactive trace control can be set to ON(enabled) or OFF (disabled). See “INFINITIDrive Mode Selector” (P.5-21).

When the VDC OFF switch is used to turn offthe VDC system, the active trace control isalso turned off.

ACTIVE TRACE CONTROL

Page 296: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0249X

When the active trace control is operatedand the “Chassis Control”mode is selectedin the trip computer, the active tracecontrol graphics are shown in the vehicleinformation display. (See “Trip computer”(P.2-31).)

If the chassis control warning messageappears in the vehicle information display,it may indicate that the active trace controlis not functioning properly. Have thesystem checked by an INFINITI retailer.(See “30. Chassis control warning” (P.2-27).)

WARNING

The active trace control may not be effectivedepending on the driving condition. Alwaysdrive carefully and attentively.

When the active trace control is operating,you may feel a pulsation in the brake pedaland hear a noise. This is normal andindicates that the active trace control isoperating properly.

Even if the active trace control is set to OFF,some functions will remain on to assist the

driver (for example, avoidance scenes).

Starting and driving 5-111

Page 297: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-112 Starting and driving

WARNING

. Never rely solely on the hill start assistsystem to prevent the vehicle frommoving backward on a hill. Always drivecarefully and attentively. Depress thebrake pedal when the vehicle is stoppedon a steep hill. Be especially carefulwhen stopped on a hill on frozen ormuddy roads. Failure to prevent thevehicle from rolling backwards mayresult in a loss of control of the vehicleand possible serious injury or death.

. The hill start assist system is notdesigned to hold the vehicle at astandstill on a hill. Depress the brakepedal when the vehicle is stopped on asteep hill. Failure to do so may cause thevehicle to roll backwards and may resultin a collision or serious personal injury.

. The hill start assist system may notprevent the vehicle from rolling back-wards on a hill under all load or roadconditions. Always be prepared to de-press the brake pedal to prevent thevehicle from rolling backwards. Failure todo so may result in a collision or serious

personal injury.

The hill start assist system automaticallykeeps the brakes applied to help preventthe vehicle from rolling backwards in thetime it takes the driver to release the brakepedal and apply the accelerator when thevehicle is stopped on a hill.

The hill start assist system will operateautomatically under the following condi-tions:

. The transmission is shifted to a forwardor reverse gear.

. The vehicle is stopped completely on ahill by applying the brake.

The maximum holding time is 2 seconds.After 2 seconds the vehicle will begin toroll back and the hill start assist systemwill stop operating completely.

The hill start assist system will not operatewhen the transmission is shifted to the N(Neutral) or P (Park) position or on a flatand level road.

The chassis control is electric controlmodule, including the following function:

. Log-in function (See “Log-in function”(P.3-14).)

. INFINITI Drive Mode Selector (See“INFINITI Drive Mode Selector” (P.5-21).)

. Active Lane Control (if so equipped)(See “Active Lane Control” (P.5-24).)

. Active Trace Control (See “Active tracecontrol” (P.5-110).)

HILL START ASSIST SYSTEM CHASSIS CONTROL

Page 298: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

FREEING A FROZEN DOOR LOCKTo prevent a door lock from freezing, applydeicer through the key hole. If the lockbecomes frozen, heat the key beforeinserting it into the key hole or use theIntelligent Key system.

ANTIFREEZEIn the winter when it is anticipated that theoutside temperature will drop below 328F(08C), check antifreeze to assure properwinter protection. For additional informa-tion, see “Engine cooling system” (P.8-9).

12-VOLT BATTERYIf the 12-volt battery is not fully chargedduring extremely cold weather conditions,the battery fluid may freeze and damagethe 12-volt battery. To maintain maximumefficiency, the 12-volt battery should bechecked regularly. For additional informa-tion, see “12-volt battery” (P.8-17).

DRAINING OF COOLANT WATERIf the vehicle is to be left outside withoutantifreeze, drain the cooling system, in-cluding the engine block. Refill beforeoperating the vehicle. For details, see“Engine cooling system” (P.8-9) and “In-verter cooling system” (P.8-11).

TIRE EQUIPMENTSUMMER tires have a tread designed toprovide superior performance on dry pave-ment. However, the performance of thesetires will be substantially reduced in snowyand icy conditions. If you operate yourvehicle on snowy or icy roads, INFINITIrecommends the use of MUD & SNOW orALL SEASON tires on all four wheels.Consult an INFINITI retailer for the tiretype, size, speed rating and availabilityinformation.

For additional traction on icy roads,studded tires may be used. However, someU.S. states and Canadian provinces prohi-bit their use. Check local, state andprovincial laws before installing studdedtires.

Skid and traction capabilities of studdedsnow tires, on wet or dry surfaces, may bepoorer than that of non-studded snowtires.

Tire chains may be used. For details, see“Tire chains” (P.8-37) of this manual.

Intelligent All-Wheel Drive (AWD)modelsIf you install snow tires, they must also bethe same size, brand, construction and

tread pattern on all four wheels.

SPECIAL WINTER EQUIPMENTIt is recommended that the following itemsbe carried in the vehicle during winter:

. A scraper and stiff-bristled brush toremove ice and snow from the windowsand wiper blades.

. A sturdy, flat board to be placed underthe jack to give it firm support.

. A shovel to dig the vehicle out ofsnowdrifts.

. Extra window washer fluid to refill thereservoir tank.

DRIVING ON SNOW OR ICE

WARNING

. Wet ice (328F, 08C and freezing rain),very cold snow or ice can be slick andvery hard to drive on. The vehicle willhave much less traction or “grip” underthese conditions. Try to avoid driving onwet ice until the road is salted orsanded.

. Whatever the condition, drive with cau-tion. Accelerate and slow down withcare. If accelerating or downshifting too

Starting and driving 5-113

COLD WEATHER DRIVING

Page 299: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-114 Starting and driving

fast, the drive wheels will lose evenmore traction.

. Allow more stopping distance underthese conditions. Braking should bestarted sooner than on dry pavement.

. Allow greater following distances onslippery roads.

. Watch for slippery spots (glare ice).These may appear on an otherwise clearroad in shaded areas. If a patch of ice isseen ahead, brake before reaching it. Trynot to brake while on the ice, and avoidany sudden steering maneuvers.

. Do not use the cruise control on slipperyroads.

. Snow can trap dangerous exhaust gasesunder your vehicle. Keep snow clear ofthe exhaust pipe and from around yourvehicle.

ENGINE BLOCK HEATER (if soequipped)Engine block heaters are used to assist incold temperature starting.

The engine block heater should be usedwhen the outside temperature is 208F(−78C) or lower.

To use the engine block heater1. Turn the INFINITI Direct Response Hy-

brid® System off.

2. Open the hood and unwrap the engineblock heater cord.

3. Plug the engine block heater cord into agrounded 3-wire, 3-pronged extensioncord.

4. Plug the extension cord into a GroundFault Interrupt (GFI) protected,grounded 110-volt AC (VAC) outlet.

5. The engine block heater must beplugged in for at least 2 - 4 hours,depending on outside temperatures, toproperly warm the engine coolant. Usean appropriate timer to turn the engineblock heater on.

6. Before starting the hybrid system,unplug and properly store the cord tokeep it away from moving parts.

WARNING

. Do not use your engine block heater withan ungrounded electrical system or a 2-pronged adapter. You can be seriouslyinjured by an electrical shock if you usean ungrounded connection.

. Disconnect and properly store the en-gine block heater cord before startingthe hybrid system. Damage to the cordcould result in an electrical shock andcan cause serious injury.

. Use a heavy-duty 3-wire, 3-prongedextension cord rated for at least 10A.Plug the extension cord into a GroundFault Interrupt (GFI) protected, grounded110-VAC outlet. Failure to use the properextension cord or a grounded outlet canresult in a fire or electrical shock andcause serious personal injury.

Page 300: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVS0263X

NOTE:

To operate the active noise control andactive sound control system properly:

. Do not cover the speakers or woofer.

. Do not cover the microphones.

. Do not change or modify speakersincluding the woofer and any audiorelated parts such as the amplifier.

. Do not make any modification includingsound deadening or modificationsaround the microphones, speakers orwoofer.

ACTIVE NOISE CONTROLThe active noise control system usesmicrophones *1 located inside the vehicleto detect engine booming noises. Thesystem then automatically produces amuted engine booming noise through thespeakers *2 and woofer *3 (if soequipped) to reduce engine boomingnoise.

If the microphone *1 or the area around itis tapped, abnormal noise may be outputfrom the speaker.

ACTIVE SOUND CONTROLThe active sound control generates soundsaccording to engine speed and drivingmodes through the speakers *2 andwoofer *3 (if so equipped) to enhancethe quality of the engine sound.

Starting and driving 5-115

ACTIVE NOISE CONTROL/ACTIVE SOUNDCONTROL

Page 301: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5-116 Starting and driving

MEMO

Page 302: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6 In case of emergency

Hazard warning flasher switch ............................. 6-2Roadside assistance program .............................. 6-2Emergency INFINITI Direct Response Hybrid®

System shut off ................................................... 6-3Flat tire................................................................ 6-3

Tire Pressure Monitoring System (TPMS).......... 6-3Run-flat tires ................................................... 6-4

If the vehicle does not start ................................ 6-5Confirm battery is discharged ........................ 6-5

Jump starting ...................................................... 6-5Push starting ...................................................... 6-7If your vehicle overheats ..................................... 6-7Towing your vehicle ............................................ 6-8

Towing recommended by INFINITI................... 6-9Vehicle recovery (freeing a stuck vehicle) ..... 6-11

Page 303: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-2 In case of emergency

SIC2574

Push the switch on to warn other driverswhen you must stop or park underemergency conditions. All turn signal lightswill flash.

WARNING

. If stopping for an emergency, be sure tomove the vehicle well off the road.

. Do not use the hazard warning flasherswhile moving on the highway unlessunusual circumstances force you to driveso slowly that your vehicle might be-come a hazard to other traffic.

. Turn signals do not work when thehazard warning flasher lights are on.

The flasher can be actuated with theignition switch in any position.

Some state laws may prohibit the use ofthe hazard warning flasher switch whiledriving.

In the event of a roadside emergency,Roadside Assistance Service is available toyou. Please refer to your Warranty Informa-tion Booklet (U.S.) or Warranty & RoadsideAssistance Information Booklet (Canada)for details.

HAZARD WARNING FLASHER SWITCH ROADSIDE ASSISTANCE PROGRAM

Page 304: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

To shut off the INFINITI Direct ResponseHybrid® System in an emergency situationwhile driving, perform the following proce-dure:

. Rapidly push the push-button ignitionswitch 3 consecutive times in less than1.5 seconds, or

. Push and hold the push-button ignitionswitch for more than 2 seconds.

Your vehicle is equipped with run-flat tiresand you can continue driving to a safelocation even if they are punctured. (See“Run-flat tires” (P.8-36).)

TIRE PRESSURE MONITORING SYS-TEM (TPMS)This vehicle is equipped with the TirePressure Monitoring System (TPMS). Itmonitors tire pressure of all tires exceptthe spare. When the low tire pressurewarning light is lit and the “Tire PressureLow - Add Air” warning appears in thevehicle information display, one or more ofyour tires is significantly under-inflated. Ifthe vehicle is being driven with low tirepressure, the TPMS will activate and warnyou of it by the low tire pressure warninglight. This system will activate only whenthe vehicle is driven at speeds above 16MPH (25 km/h). For more details, see “Lowtire pressure warning light” (P.2-15) and“Tire Pressure Monitoring System (TPMS)”(P.5-4).

WARNING

. Radio waves could adversely affectelectric medical equipment. Those whouse a pacemaker should contact the

electric medical equipment manufacturerfor the possible influences before use.

. If the low tire pressure warning lightilluminates while driving, avoid suddensteering maneuvers or abrupt braking,reduce vehicle speed, pull off the road toa safe location and stop the vehicle assoon as possible. Driving with under-inflated tires may permanently damagethe tires and increase the likelihood oftire failure. Serious vehicle damagecould occur and may lead to an accidentand could result in serious personalinjury. Check the tire pressure for allfour tires. Adjust the tire pressure to therecommended COLD tire pressure shownon the Tire and Loading Informationlabel to turn the low tire pressurewarning light OFF. If the light stillilluminates while driving after adjustingthe tire pressure, a tire may be flat.

. When a wheel is replaced, the TPMS willnot function and the low tire pressurewarning light will flash for approxi-mately 1 minute. The light will remainon after 1 minute. Contact your INFINITIretailer as soon as possible for tirereplacement and/or system resetting.

In case of emergency 6-3

EMERGENCY INFINITI DIRECT RESPONSEHYBRID® SYSTEM SHUT OFF FLAT TIRE

Page 305: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-4 In case of emergency

. Replacing tires with those not originallyspecified by INFINITI could affect theproper operation of the TPMS.

. Do not inject any tire liquid or aerosoltire sealant into the tires, as this maycause a malfunction of the tire pressuresensors.

RUN-FLAT TIRESRun-flat tires are those tires that can beused temporarily if they are punctured. See“Run-flat tires” (P.8-36).

Also, refer to “Important Tire Safety In-formation” (US) or “Tire Safety Informa-tion” (Canada) in the INFINITI WarrantyInformation Booklet.

WARNING

. Although you can continue driving with apunctured run-flat tire, remember thatvehicle handling stability is reduced,which could lead to an accident andpersonal injury. Also, driving a longdistance at high speeds may damagethe tires.

. Do not drive at speeds above 50 MPH(80 km/h) and do not drive more thanapproximately 93 miles (150 km) with apunctured run-flat tire. The actual dis-tance the vehicle can be driven on a flattire depends on outside temperature,vehicle load, road conditions and otherfactors.

. Drive safely at reduced speeds. Avoidhard cornering or braking, which maycause you to lose control of the vehicle.

. If you detect any unusual sounds orvibrations while driving with a puncturedrun-flat tire, pull off the road to a safelocation and stop the vehicle as soon aspossible. The tire may be seriouslydamaged and need to be replaced.

CAUTION

. Never install tire chains on a puncturedrun-flat tire, as this could damage yourvehicle.

. Avoid driving over any projection orpothole, as the clearance between thevehicle and the ground is smaller thannormal.

. Do not enter an automated car wash witha punctured run-flat tire.

. Have the punctured tire inspected by anINFINITI retailer or other authorizedrepair shop. Replace the tire as soonas possible if the tire is seriouslydamaged.

If you have a flat tire and have to stop thevehicle, follow the instructions below.

1. Safely move the vehicle off the roadand away from traffic.

2. Turn on the hazard warning flashers.

3. Park on a level surface and apply theparking brake. Move the shift lever tothe P (Park) position.

4. Turn off the hybrid system.

5. Raise the hood to warn other traffic,and to signal professional road assis-tance personnel that you need assis-tance.

6. Have all passengers get out of thevehicle and stand in a safe place, awayfrom traffic and clear of the vehicle.

For the tire removing procedure, see“Jacking up the vehicle and replacing tires”(P.8-40).

Page 306: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Before attempting to jump start the vehi-cle, make sure the fuel tank is not emptyand the correct starting procedure isfollowed. See “Starting the INFINITI DirectResponse Hybrid® System” (P.5-14). Donot drive the vehicle on battery power onlyif the fuel tank is empty. The Lithium ion(Li-ion) battery will become discharged andthe INFINITI Direct Response Hybrid® Sys-tem will turn off.

CONFIRM BATTERY IS DISCHARGEDIf any of the following conditions occurs,the 12-volt battery might discharged:

. The instrument cluster and/or head-lights are not normal brightness.

. Audio accessories cannot be turned on.

. The hybrid system does not becomeREADY to drive mode.

. The ignition switch cannot be placed inthe ON position.

Check the following if you notice aboveconditions.

1. Check that the 12-volt battery terminalsare tight and clean. See “12-voltbattery” (P.8-17). The 12-volt batteryis located on the left hand side of thetrunk behind an access panel. If the 12-volt battery terminals are loose, contact

your INFINITI retailer.

2. If the 12-volt battery terminals are tightand clean, try to jump start the vehicle.See “Jump starting” (P.6-5).

If the hybrid system still does not start,contact an INFINITI retailer.

To start your INFINITI Direct ResponseHybrid® System with a booster battery,the instructions and precautions belowmust be followed.

Jump starting provides power to the 12 voltsystem to allow the electrical systems tooperate. The electrical systems must beoperating to allow the Lithium ion (Li-ion)battery to be charged. Jump starting doesnot charge the Li-ion battery.

WARNING

. If done incorrectly, jump starting canlead to a 12-volt battery explosion,resulting in severe injury or death. Itcould also damage your vehicle.

. Explosive hydrogen gas is always pre-sent in the vicinity of the 12-volt battery.Make sure that the vent tube ismounted.

. Do not allow battery fluid to come intocontact with eyes, skin, clothing orpainted surfaces. Battery fluid is acorrosive sulfuric acid solution whichcan cause severe burns. If the fluidshould come into contact with anything,immediately flush the contacted areawith water.

In case of emergency 6-5

IF THE VEHICLE DOES NOT START JUMP STARTING

Page 307: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-6 In case of emergency

. Keep the 12-volt battery out of the reachof children.

. The booster battery must be rated at 12volts. Use of an improperly rated batterycan damage your vehicle.

. Whenever working on or near a 12-voltbattery, always wear suitable eye pro-tectors (for example, goggles or indus-trial safety spectacles) and removerings, metal bands, or any other jewelry.Do not lean over the 12-volt batterywhen jump starting.

. Do not attempt to jump start a frozenbattery. It could explode and causeserious injury.

. Your vehicle has an automatic enginecooling fan. It could come on at any time.Keep hands and other objects away fromit.

CAUTION

Do not attempt to jump start a hybridvehicle as a booster vehicle.

JVE0118X

WARNING

Always follow the instructions below. Failureto do so could result in damage to thecharging system and cause personal injury.

1. If the booster battery is in anothervehicle *A , position the two vehicles(*A and *B ) to bring the battery andthe fuse box into close proximity toeach other.

Do not allow the two vehicles to touch.

2. Apply parking brake. Move the shiftlever to the P (Park) position. Switch offall unnecessary electrical systems(light, heater, air conditioner, etc.).

3. Connect jumper cables in the sequenceas illustrated (*1 ? *2 ? *3 ? *4 ).

CAUTION

. Always connect positive (+) to positive(+) and negative (−) to body ground (asillustrated) − not to the 12-volt battery.

. Make sure the jumper cables do nottouch moving parts in the engine com-

Page 308: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

partment and that clamps do not contactany other metal.

4. Start the engine of the booster vehicle*A and let it run for a few minutes.

5. Start the hybrid system of the vehiclebeing jump started *B .

CAUTION

If the hybrid system does not start rightaway, push the ignition switch to the OFFposition and wait 10 seconds before tryingagain.

6. After starting your hybrid system, care-fully disconnect the negative cable andthen the positive cable (*4 ?*3 ?*2? *1 ).

NOTE:

If it is not possible to turn the hybridsystem ON by following this procedure,contact an INFINITI retailer immediately.

Do not attempt to start the engine bypushing.

CAUTION

. Automatic Transmission (AT) modelscannot be push-started or tow-started.Attempting to do so may cause trans-mission damage.

. Three-way catalyst equipped modelsshould not be started by pushing sincethe three-way catalyst may be damaged.

. Never try to start the vehicle by towingit; when the engine starts, the forwardsurge could cause the vehicle to collidewith the tow vehicle.

. Hybrid models cannot be push-started ortow-started. Attempting to do so maycause electrical or transmission damage.

CAUTION

. Do not continue to drive if your vehicleoverheats. Doing so could cause enginedamage or a vehicle fire.

. To avoid the danger of being scalded,never remove the radiator cap while theengine is still hot. When the radiator capis removed, pressurized hot water willspurt out, possibly causing seriousinjury.

. Do not open the hood if steam is comingout.

If your vehicle is overheating (indicated byan extremely high temperature gaugereading), or if you feel a lack of enginepower, detect abnormal noise, etc., takethe following steps:

1. Move the vehicle safely off the road,apply the parking brake and move theshift lever to the P (Park) position.

Do not turn the INFINITI Direct Re-sponse Hybrid® System off.

2. Turn off the climate control. Open allthe windows, move the heater or airconditioner temperature control to

In case of emergency 6-7

PUSH STARTING IF YOUR VEHICLE OVERHEATS

Page 309: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-8 In case of emergency

maximum hot and fan control to highspeed.

3. If engine overheating is caused byclimbing a long hill on a hot day, runthe engine at a fast idle (approximately1,500 rpm) until the temperature gaugeindication returns to normal.

4. Get out of the vehicle. Look and listenfor steam or coolant escaping from theradiator before opening the hood. (Ifsteam or coolant is escaping, turn offthe hybrid system.) Do not open thehood further until no steam or coolantcan be seen.

5. Open the engine hood.

WARNING

If steam or water is coming from the engine,stand clear to prevent getting burned.

6. Also check if the cooling fan is running.The radiator hoses and radiator shouldnot leak water. If coolant is leaking orthe cooling fan does not run, stop thehybrid system.

WARNING

Be careful not to allow your hands, hair,jewelry or clothing to come into contactwith, or get caught in, the engine coolingfan. The engine cooling fan can start at anytime.

7. After the engine cools down, check thecoolant level in the reservoir tank withthe engine running. Add coolant to thereservoir tank if necessary. Have yourvehicle repaired at the nearest INFINITIretailer.

When towing your vehicle, all State (Pro-vincial in Canada) and local regulations fortowing must be followed. Incorrect towingequipment could damage your vehicle.Towing instructions are available from anINFINITI retailer. Local service operators arefamiliar with the applicable laws andprocedures for towing. To assure propertowing and to prevent accidental damageto your vehicle, INFINITI recommends thatyou have a service operator tow yourvehicle. It is advisable to have the serviceoperator carefully read the following pre-cautions.

WARNING

. Never ride in a vehicle that is beingtowed.

. Never get under your vehicle after it hasbeen lifted by a tow truck.

CAUTION

. When towing, make sure that the trans-mission, axles, steering system andpowertrain are in working condition. Ifany unit is damaged, dollies must be

TOWING YOUR VEHICLE

Page 310: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

used.

. Always attach safety chains before tow-ing.

For information about towing your vehiclebehind a recreational vehicle (RV), see“Flat towing” (P.9-19).

SCE0788

Two-Wheel Drive (2WD) modelsTOWING RECOMMENDED BY INFINITI

Two-Wheel Drive (2WD) modelsINFINITI recommends that your vehicle betowed with the driving (rear) wheels off theground or place the vehicle on a flat bedtruck as illustrated. The vehicle should onlybe loaded onto a flat bed using a winch.

WARNING

If your vehicle needs to be towed, do it withthe rear wheels raised. If the rear wheels areon the ground when towing, the electric

motor may generate electricity. This maydamage the INFINITI Direct Response Hy-brid® System components and cause a fire.

CAUTION

. Never tow automatic transmission mod-els with the rear wheels on the groundor four wheels on the ground (forward orbackward), as this may cause seriousand expensive damage to the transmis-

In case of emergency 6-9

Page 311: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-10 In case of emergency

sion. If it is necessary to tow the vehiclewith the front wheels raised, always usetowing dollies under the rear wheels.

. When towing rear wheel drive modelswith the front wheels on the ground oron towing dollies: Push the ignitionswitch to the ACC or ON position, andsecure the steering wheel in a straight-ahead position with a rope or similardevice.

SCE0488

All-Wheel Drive (AWD) modelsIntelligent All-Wheel Drive (AWD)modelsINFINITI recommends that towing dollies beused when towing your vehicle or thevehicle be placed on a flat bed truck asillustrated. The vehicle should only beloaded onto a flat bed using a winch.

CAUTION

Never tow Intelligent AWD models with anyof the wheels on the ground as this maycause serious and expensive damage to the

powertrain.

Page 312: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVE0120X

Front

JVE0119X

Rear

JVE0130X

Rear

VEHICLE RECOVERY (freeing a stuckvehicle)

WARNING

. Stand clear of a stuck vehicle.

. Do not spin your tires at high speed. Thiscould cause them to explode and resultin serious injury. Parts of your vehiclecould also overheat and be damaged.

Pulling a stuck vehicleIf your vehicle is stuck in sand, snow, mud,etc., use a tow strap or other devicedesigned specifically for vehicle recovery.Always follow the manufacturer’s instruc-tions for the recovery device.

Front:

1. Remove the cover using a suitable tool.

2. Securely install the vehicle recoveryhook*1 stored in the trunk. Attach thetow strap to the recovery hook.

Make sure that the hook is properlysecured in the original place after use.

Rear:

Do not use the tie down hook *2 fortowing or vehicle recovery.

The rear hook *3 is designed as therecovery hook.

To use the recovery hook:

1. Remove the cover from the rear bumperusing a suitable tool.

2. Securely install the recovery hook *3(stored in the trunk) to the attachingmount located on the rear bumper.

3. Make sure that the recovery hook isproperly secured in its storage location

In case of emergency 6-11

Page 313: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

6-12 In case of emergency

after use.

CAUTION

. Tow chains or cables must be attachedonly to the vehicle recovery hooks ormain structural members of the vehicle.Otherwise, the vehicle body will bedamaged.

. Do not use the vehicle tie downs to freea vehicle stuck in sand, snow, mud, etc.

. Never tow a vehicle using the vehicle tiedowns or recovery hooks.

. Always pull the cable straight out fromthe front of the vehicle. Never pull on thevehicle at an angle.

. Pulling devices should be routed so theydo not touch any part of the suspension,steering, brake or cooling systems.

. Pulling devices such as ropes or canvasstraps are not recommended for use invehicle towing or recovery.

Rocking a stuck vehicleIf your vehicle is stuck in sand, snow, mud,etc., use the following procedure:

1. Turn off the Vehicle Dynamic Control(VDC) system.

2. Make sure the area in front and behindthe vehicle is clear of obstructions.

3. Turn the steering wheel right and left toclear an area around the front tires.

4. Slowly rock the vehicle forward andbackward.. Shift back and forth between R

(Reverse) and D (Drive).. Apply the accelerator as little as

possible to maintain the rockingmotion.

. Release the accelerator pedal beforeshifting between R and D.

. Do not spin the tires above 35 MPH(55 km/h).

5. If the vehicle cannot be freed after afew tries, contact a professional towingservice to remove the vehicle.

Page 314: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7 Appearance and care

Cleaning exterior ................................................. 7-2Washing.......................................................... 7-2Waxing............................................................ 7-2Removing spots............................................... 7-3Underbody ...................................................... 7-3Glass............................................................... 7-3Wheels............................................................ 7-3Chrome parts .................................................. 7-4Tire dressing ................................................... 7-4

Cleaning interior .................................................. 7-5Lithium-ion (Li-ion) battery and DC/DC converterair vent ........................................................... 7-6

Air fresheners ................................................ 7-6Moonroof sunshade....................................... 7-6Floor mats ..................................................... 7-7Seat belts...................................................... 7-7

Corrosion protection............................................ 7-8Most common factors contributing tovehicle corrosion ........................................... 7-8Environmental factors influence the rateof corrosion ................................................... 7-8To protect your vehicle from corrosion ........... 7-8

Page 315: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7-2 Appearance and care

In order to maintain the appearance ofyour vehicle, it is important to take propercare of it.

To protect the paint surface, wash yourvehicle as soon as you can:

. after a rainfall to prevent possibledamage from acid rain

. after driving on coastal roads

. when contaminants such as soot, birddroppings, tree sap, metal particles orbugs get on the paint surface

. when dust or mud builds up on thesurface

Whenever possible, store or park yourvehicle inside a garage or in a coveredarea.

When it is necessary to park outside, parkin a shady area or protect the vehicle witha body cover.

Be careful not to scratch the paint surfacewhen putting on or removing the bodycover.

WASHINGWash dirt off the vehicle with a wet spongeand plenty of water. Clean the vehiclethoroughly using a mild soap, a specialvehicle soap or general purpose dishwash-ing liquid mixed with clean, lukewarm(never hot) water.

CAUTION

. Do not use car washes that use acid inthe detergent. Some car washes, espe-cially brushless ones, use some acid forcleaning. The acid may react with someplastic vehicle components, causingthem to crack. This could affect theirappearance, and also could cause themnot to function properly. Always checkwith your car wash to confirm that acidis not used.

. Do not wash the vehicle with stronghousehold soap, strong chemical deter-gents, gasoline or solvents.

. Do not wash the vehicle in direct sun-light or while the vehicle body is hot, asthe surface may become water-spotted.

. Avoid using tight-napped or roughcloths, such as washing mitts. Care

must be taken when removing caked-ondirt or other foreign substances so thepaint surface is not scratched or da-maged.

Rinse the vehicle again with plenty of cleanwater.

Inside flanges, seams and folds on thedoors, hatches and hood are particularlyvulnerable to the effects of road salt.Therefore, these areas must be regularlycleaned. Make sure that the drain holes inthe lower edge of the door are open. Spraywater under the body and in the wheelwells to loosen the dirt and wash awayroad salt.

Avoid leaving water spots on the paintsurface by using a damp chamois to drythe vehicle.

WAXINGRegular waxing protects the paint surfaceand helps retain new vehicle appearance.Polishing is recommended to remove built-up wax residue and to avoid a weatheredappearance before reapplying wax.

An INFINITI retailer can assist you inchoosing the proper product.

CLEANING EXTERIOR

Page 316: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Wax your vehicle only after a thoroughwashing. Follow the instructions sup-plied with the wax.

. Do not use a wax containing anyabrasives, cutting compounds or clea-ners that may damage the vehiclefinish.

Machine compound or aggressive polish-ing on a base coat/clear coat paint finishmay dull the finish or leave swirl marks.

REMOVING SPOTSRemove tar and oil spots, industrial dust,insects, and tree sap as quickly as possiblefrom the paint surface to avoid lastingdamage or staining. Special cleaningproducts are available at an INFINITIretailer or any automotive accessorystores.

UNDERBODYIn areas where road salt is used in winter,the underbody must be cleaned regularly.This will prevent dirt and salt from buildingup and causing the acceleration of corro-sion on the underbody and suspension.Before the winter period and again in thespring, the underseal must be checkedand, if necessary, re-treated.

GLASSUse glass cleaner to remove smoke anddust film from the glass surfaces. It isnormal for glass to become coated with afilm after the vehicle is parked in the hotsun. Glass cleaner and a soft cloth willeasily remove this film.

CAUTION

When cleaning the inside of the windows,do not use sharp-edged tools, abrasivecleaners or chlorine-based disinfectant clea-ners. They could damage the electricalconductors, radio antenna elements or rearwindow defroster elements.

WHEELSWash the wheels when washing the vehicleto maintain their appearance.

. Clean the inner side of the wheels whenthe wheel is changed or the undersideof the vehicle is washed.

. Inspect wheel rims regularly for dentsor corrosion. Such damage may causeloss of pressure or poor seal at the tirebead.

. INFINITI recommends that the roadwheels be waxed to protect againstroad salt in areas where it is usedduring winter.

CAUTION

Do not use abrasive cleaners when washingthe wheels.

Aluminum alloy wheelsWash regularly with a sponge dampened ina mild soap solution, especially duringwinter months in areas where road salt isused. Salt could discolor the wheels if notremoved.

CAUTION

Follow the directions below to avoid stain-ing or discoloring the wheels:

. Do not use a cleaner that uses strongacid or alkali contents to clean thewheels.

. Do not apply wheel cleaners to thewheels when they are hot. The wheeltemperature should be the same as

Appearance and care 7-3

Page 317: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7-4 Appearance and care

ambient temperature.

. Rinse the wheel to completely removethe cleaner within 15 minutes after thecleaner is applied.

Bright wheels (if so equipped)The bright wheels use a different coatingprocess than typical aluminum alloy wheeland they are not plated wheels. Thesewheels are clear-coated and require thefollowing special cleaning. They should beregularly washed with a soft spongesoaked in a lot of water. After washingwith water, wipe clean with a dry, soft clothand dry completely. When there is chemicalor tire wax, or dirt such as an antifreezeagent on the surface, wash them withwater as soon as possible.

CAUTION

. The surfaces of the wheels use adifferent coating process than typicalaluminum alloy wheels. Do not usealuminum alloy wheel cleaners or abra-sive cleaners to clean the wheels. Usingsuch cleaners could damage the wheelsurfaces.

. Do not use an automatic car wash if thevehicle is equipped with bright wheels.The wheel coating may be damaged.

. Do not use a brush to wash the wheels ifthe vehicle is equipped with brightwheels. The wheel coating may bedamaged.

CHROME PARTSClean chrome parts regularly with a non-abrasive chrome polish to maintain thefinish.

TIRE DRESSINGINFINITI does not recommend the use oftire dressings. Tire manufacturers apply acoating to the tires to help reduce dis-coloration of the rubber. If a tire dressing isapplied to the tires, it may react with thecoating and form a compound. This com-pound may come off the tire while drivingand stain the vehicle paint.

If you choose to use a tire dressing, takethe following precautions:

. Use a water-based tire dressing. Thecoating on the tire dissolves moreeasily with an oil-based tire dressing.

. Apply a light coat of tire dressing tohelp prevent it from entering the tiretread/grooves (where it would be diffi-cult to remove).

. Wipe off excess tire dressing using adry towel. Make sure the tire dressingis completely removed from the tiretread/grooves.

. Allow the tire dressing to dry asrecommended by tire dressing manu-facturer.

Page 318: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Occasionally remove loose dust from theinterior trim, plastic parts and seats usinga vacuum cleaner or soft bristled brush.Wipe the vinyl and leather surfaces with aclean, soft cloth dampened in mild soapsolution, then wipe clean with a dry softcloth.

Regular care and cleaning is required inorder to maintain the appearance of theleather.

Before using any fabric protector, read themanufacturer’s recommendations. Somefabric protectors contain chemicals thatmay stain or bleach the seat material.

Use a cloth dampened only with water, toclean the meter and gauge lens.

WARNING

Do not use water or acidic cleaners (hotsteam cleaners) on the seat. This candamage the seat or occupant classificationsensors. This can also affect the operationof the air bag system and result in seriouspersonal injury.

CAUTION

. Never use benzine, thinner, or anysimilar material.

. For cleaning, use a soft cloth, dampenedwith water. Never use a rough cloth,alcohol, benzine, thinner or any kind ofsolvent or paper towel with a chemicalcleaning agent. They will scratch orcause discoloration to the lens.

. Do not spray any liquid such as water onthe meter lens. Spraying liquid maycause the system to malfunction.

. Small dirt particles can be abrasive anddamaging to the leather surfaces andshould be removed promptly. Do not usesaddle soap, car waxes, polishes, oils,cleaning fluids, solvents, detergents orammonia-based cleaners as they maydamage the leather’s natural finish.

. Do not clean the interior or trunk usingwater. If water contacts the Lithium-ion(Li-ion) battery, it may cause a shortcircuit and damage the battery.

. Only use fabric protectors approved byINFINITI.

. Do not use glass or plastic cleaner onmeter or gauge lens covers. It maydamage the lens cover.

Appearance and care 7-5

CLEANING INTERIOR

Page 319: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7-6 Appearance and care

JVO0100X

LITHIUM-ION (Li-ion) BATTERY ANDDC/DC CONVERTER AIR VENT

CAUTION

. Do not place objects over or into the airvent. The Li-ion battery or DC/DC con-verter may overheat and be damaged.

. Do not allow any liquid to get on or inthe air vent. It may cause a short circuitand damage the Li-ion battery or DC/DCconverter.

. Clean the air vent regularly to preventthe Li-ion battery or DC/DC converter

from overheating.

Regularly clean the air vent *A with a drycloth to prevent the vent from beingblocked.

AIR FRESHENERSMost air fresheners use a solvent thatcould affect the vehicle interior. If you usean air freshener, take the following pre-cautions:

. Hanging-type air fresheners can causepermanent discoloration when theycontact vehicle interior surfaces. Placethe air freshener in a location thatallows it to hang free and not contactan interior surface.

. Liquid-type air fresheners typically clipon the vents. These products can causeimmediate damage and discolorationwhen spilled on interior surfaces.

Carefully read and follow the manufac-turer’s instructions before using air fresh-eners.

MOONROOF SUNSHADEThe moonroof sunshade is made from asuede material.

Clean the sunshade material as follows:

CAUTION

To help prevent damaging the sunshadewhile cleaning:

. Do not rub the material with a cloth.Doing so can damage the surface of thematerial or cause a stain to spread.

. Never use benzine, thinner or any similarchemical to clean the suede. This maydiscolor the sunshade and damage thesurface.

. Clean water based stains by patting thesurface with a clean soft cloth dampenedin warm water. Press a clean dry clothonto the surface to remove as muchdampness as possible and then let airdry.

. Clean oil based stains by patting thesurface with a clean soft cloth dampenedin warm water. Press a clean dry clothonto the surface to remove as muchdampness as possible and then let air

Page 320: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

dry.

FLOOR MATS

WARNING

To avoid potential pedal interference thatmay result in a collision or injury:

. NEVER place a floor mat on top ofanother floor mat in the driver frontposition.

. Use only genuine NISSAN floor matsspecifically designed for use in yourvehicle model. See your INFINITI retailerfor more information.

. Properly position the mats in the floor-well using the floor mat positioning aid.See “Floor mat positioning aid” (P.7-7).

The use of INFINITI floor mats can extendthe life of your vehicle carpet and make iteasier to clean the interior. Mats should bemaintained with regular cleaning andreplaced if they become excessively worn.

SAI0050

Front (example)

Floor mat positioning aidThis model includes front floor mat brack-ets to act as floor mat positioning aid.INFINITI floor mats have been speciallydesigned for your vehicle model. The frontfloor mats have grommet holes in them. Toinstall, simply position the mat by placingthe floor mat bracket through the floor matgrommet hole while centering the mat inthe floor pan contour.

Periodically check to make certain that themats are properly positioned.

SAI0051

Bracket positionsThe illustration shows the location of thefloor mat brackets.

SEAT BELTSThe seat belts can be cleaned by wipingthem with a sponge dampened in a mildsoap solution. Allow the belts to drycompletely before using them.

See “Seat belts” (P.1-10).

WARNING

Do not allow wet seat belts to roll up in theretractor. NEVER use bleach, dye, or chemi-

Appearance and care 7-7

Page 321: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7-8 Appearance and care

cal solvents to clean the seat belts, sincethese materials may severely weaken theseat belt webbing.

MOST COMMON FACTORS CONTRI-BUTING TO VEHICLE CORROSION. The accumulation of moisture-retaining

dirt and debris in body panel sections,cavities, and other areas.

. Damage to paint and other protectivecoatings caused by gravel and stonechips or minor traffic accidents.

ENVIRONMENTAL FACTORS INFLU-ENCE THE RATE OF CORROSION

MoistureAccumulation of sand, dirt and water onthe vehicle body underside can acceleratecorrosion. Wet floor coverings will not drycompletely inside the vehicle, and shouldbe removed for drying to avoid floor panelcorrosion.

Relative humidityCorrosion will be accelerated in areas ofhigh relative humidity, especially thoseareas where the temperatures stay abovefreezing where atmospheric pollution ex-ists, or where road salt is used.

TemperatureA temperature increase will accelerate therate of corrosion to those parts which arenot well ventilated.

Air pollutionIndustrial pollution, the presence of salt inthe air in coastal areas, or heavy road saltuse will accelerate the corrosion process.Road salt will also accelerate the disinte-gration of paint surfaces.

TO PROTECT YOUR VEHICLE FROMCORROSION. Wash and wax your vehicle often to

keep the vehicle clean.. Always check for minor damage to the

paint and repair it as soon as possible.. Keep drain holes at the bottom of the

doors open to avoid water accumula-tion.

. Check the underbody for accumulationof sand, dirt or salt. If present, washwith water as soon as possible.

CORROSION PROTECTION

Page 322: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

CAUTION

. NEVER remove dirt, sand or other debrisfrom the passenger compartment bywashing it out with a hose. Remove dirtwith a vacuum cleaner.

. Never allow water or other liquids tocome in contact with electronic compo-nents inside the vehicle as this maydamage them.

Chemicals used for road surface deicingare extremely corrosive. They acceleratecorrosion and deterioration of underbodycomponents such as the exhaust system,fuel and brake lines, brake cables, floorpan and fenders.

In winter, the underbody must be cleanedperiodically.

For additional protection against rust andcorrosion, which may be required in someareas, consult an INFINITI retailer.

Appearance and care 7-9

Page 323: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

7-10 Appearance and care

MEMO

Page 324: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8 Maintenance and do-it-yourself

Maintenance requirement .................................... 8-2Scheduled maintenance .................................. 8-2General maintenance....................................... 8-2Where to go for service ................................... 8-2

General maintenance........................................... 8-2Explanation of maintenance items ................... 8-2

Maintenance precautions..................................... 8-5Engine compartment check locations ................... 8-7

VQ35HR engine ............................................... 8-7Engine cooling system......................................... 8-9

Checking engine coolant level ....................... 8-10Changing engine coolant ............................... 8-10

Inverter cooling system...................................... 8-11Checking inverter coolant level ...................... 8-12Changing inverter coolant.............................. 8-12

Engine oil .......................................................... 8-12Checking engine oil level............................... 8-12Changing engine oil and filter ....................... 8-13

Automatic transmission fluid ............................. 8-15Brake fluid......................................................... 8-15Window washer fluid ......................................... 8-1612-volt battery................................................... 8-17

Checking battery fluid level ........................... 8-18Jump starting ................................................ 8-18

Spark plugs ...................................................... 8-19Replacing spark plugs ................................. 8-19

Air cleaner ........................................................ 8-20Windshield wiper blades................................... 8-21

Cleaning ...................................................... 8-21Replacing..................................................... 8-21

Brakes .............................................................. 8-22Self-adjusting brakes ................................... 8-22Brake pad wear warning .............................. 8-22

Fuses ................................................................ 8-23Engine compartment and trunk.................... 8-23Passenger compartment............................... 8-24

Intelligent Key battery replacement ................... 8-25Lights................................................................ 8-27

Exterior and interior lights ........................... 8-28Wheels and tires............................................... 8-30

Tire pressure ............................................... 8-30Tire labeling ................................................ 8-33Types of tires............................................... 8-35Tire chains................................................... 8-37Changing wheels and tires........................... 8-38Jacking up the vehicle and replacing tires.... 8-40

Page 325: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-2 Maintenance and do-it-yourself

Some day-to-day and regular maintenanceis essential to maintain your vehicle goodmechanical condition, as well as its emis-sion and engine performance.

It is the owner’s responsibility to makesure that the scheduled maintenance, aswell as general maintenance, is performed.

As the vehicle owner, you are the only onewho can ensure that your vehicle receivesthe proper maintenance. You are a vital linkin the maintenance chain.

SCHEDULED MAINTENANCEFor your convenience, both required andoptional scheduled maintenance items aredescribed and listed in your “INFINITIService and Maintenance Guide”. You mustrefer to that guide to ensure that necessarymaintenance is performed on your vehicleat regular intervals.

GENERAL MAINTENANCEGeneral maintenance includes those itemswhich should be checked during normalday-to-day operation. They are essential forproper vehicle operation. It is your respon-sibility to perform these procedures reg-ularly as prescribed.

Performing general maintenance checks

requires minimal mechanical skill and onlya few general automotive tools.

These checks or inspections can be doneby yourself, a qualified technician or, if youprefer, an INFINITI retailer.

WHERE TO GO FOR SERVICEIf maintenance service is required or yourvehicle appears to malfunction, have thesystems checked and serviced by anINFINITI retailer.

INFINITI technicians are well-trained spe-cialists and are kept up to date with thelatest service information through techni-cal bulletins, service tips, and in-retailer-ship information systems. They arecompletely qualified to work on INFINITIvehicles before work begins.

You can be confident that an INFINITIretailer’s service department performs thebest job to meet the maintenance require-ments on your vehicle.

During the normal day-to-day operation ofthe vehicle, general maintenance shouldbe performed regularly as prescribed inthis section. If you detect any unusualsounds, vibrations or smell, be sure tocheck for the cause or have an INFINITIretailer do it promptly. In addition, youshould notify an INFINITI retailer if youthink that repairs are required.

When performing any checks or mainte-nance work, see “Maintenance precau-tions” (P.8-5).

EXPLANATION OF MAINTENANCEITEMSAdditional information on the followingitems with “*” is found later in thissection.

Outside the vehicleThe maintenance items listed here shouldbe performed from time to time, unlessotherwise specified.

Doors and engine hood: Check that alldoors and the engine hood, operateproperly. Also ensure that all latches locksecurely. Lubricate hinges, latches, latchpins, rollers and links if necessary. Makesure that the secondary latch keeps thehood from opening when the primary latch

MAINTENANCE REQUIREMENT GENERAL MAINTENANCE

Page 326: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

is released.

When driving in areas using road salt orother corrosive materials, check lubricationfrequently.

Lights*: Clean the headlights on a regularbasis. Make sure that the headlights, stoplights, tail lights, turn signal lights, andother lights are all operating properly andinstalled securely. Also check headlightaim.

Road wheel nuts (lug nuts)*: When check-ing the tires, make sure no wheel nuts aremissing, and check for any loose wheelnuts. Tighten if necessary.

Tire rotation*: Tires should be rotatedevery 5,000 miles (8,000 km).

Tires*: Check the pressure with a gaugeoften and always prior to long distancetrips. If necessary, adjust the pressure inall tires, including the spare, to thepressure specified. Check carefully fordamage, cuts or excessive wear.

Tire Pressure Monitoring System (TPMS)transmitter components: Replace the TPMStransmitter grommet seal, valve core andcap when the tires are replaced due towear or age.

Tire, wheel alignment and balance: If the

vehicle should pull to either side whiledriving on a straight and level road, or ifyou detect uneven or abnormal tire wear,there may be a need for wheel alignment.

If the steering wheel or seat vibrates atnormal highway speeds, wheel balancingmay be needed.

For additional information regarding tires,refer to “Important Tire Safety Information”(US) or “Tire Safety Information” (Canada)in the INFINITI Warranty Information Book-let.

Windshield: Clean the windshield on aregular basis. Check the windshield atleast every six months for cracks or otherdamage. Have a damaged windshieldrepaired by a qualified repair facility.

Windshield wiper blades*: Check forcracks or wear if they do not wipe properly.

Inside the vehicleThe maintenance items listed here shouldbe checked on a regular basis, such aswhen performing periodic maintenance,cleaning the vehicle, etc.

Accelerator pedal: Check the pedal forsmooth operation and make sure the pedaldoes not catch or require uneven effort.

Keep the floor mat away from the pedal.

Automatic transmission P (Park) mechan-ism: On a fairly steep hill, check that yourvehicle is held securely with the shift leverin the P (Park) position without applyingany brakes.

Brake pedal: Check the pedal for smoothoperation. If the brake pedal suddenlygoes down further than normal, the pedalfeels spongy or the vehicle seems to takelonger to stop, see an INFINITI retailerimmediately. Keep the floor mat away fromthe pedal.

Brakes: Check that the brakes do not pullthe vehicle to one side when applied.

Parking brake: Check the parking brakeoperation regularly. The vehicle should besecurely held on a fairly steep hill with onlythe parking brake applied. If the parkingbrake needs adjusted, see an INFINITIretailer.

Seat belts: Check that all parts of the seatbelt system (for example, buckles, an-chors, adjuster and retractors) operateproperly and smoothly, and are installedsecurely. Check the belt webbing for cuts,fraying, wear or damage.

Seats: Check seat position controls such as

Maintenance and do-it-yourself 8-3

Page 327: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-4 Maintenance and do-it-yourself

seat adjusters, seatback recliner, etc. toensure they operate smoothly and that alllatches lock securely in every position.Check that the head restraints move upand down smoothly and that the locks (ifso equipped) hold securely in all latchedpositions.

Steering wheel: Check for changes in thesteering conditions, such as excessive freeplay, hard steering or strange noises.

Warning lights and chimes: Make sure thatall warning lights and chimes are operatingproperly.

Windshield defroster: Check that the aircomes out of the defroster outlets properlyand in sufficient quantity when operatingthe heater or air conditioner.

Windshield wiper and washer*: Check thatthe wipers and washer operate properlyand that the wipers do not streak.

Under the hood and vehicleThe maintenance items listed here shouldbe checked periodically (for example, eachtime you check the engine oil or refuel).

12-volt battery*: Check the fluid level ineach cell. It should be between the MAXand MIN lines. Vehicles operated in high

temperatures or under severe conditionrequire frequent checks of the battery fluidlevel.

NOTE:

Care should be taken to avoid situationsthat can lead to potential 12-volt batterydischarge and potential no-start condi-tions such as:1. Installation or extended use of electro-

nic accessories that consume 12-voltbattery power when the engine is notrunning (Phone chargers, GPS, DVDplayers, etc.)

2. Vehicle is not driven regularly and/oronly driven short distances.

In these cases, the 12-volt battery mayneed to be charged to maintain 12-voltbattery health.

Brake fluid level*: Make sure that thebrake fluid level is between the MAX andMIN lines on the reservoir.

Engine coolant level*: Check the coolantlevel when the engine is cold.

Engine drive belts*: Make sure that no beltis frayed, worn, cracked or oily.

Engine oil level*: Check the level afterparking the vehicle on a level spot and

turning off the INFINITI Direct ResponseHybrid® System. Wait more than 15minutes for the oil to drain back into theoil pan.

Exhaust system: Make sure there are noloose supports, cracks or holes. If thesound of the exhaust seems unusual orthere is a smell of exhaust fumes, im-mediately have the exhaust system in-spected by an INFINITI retailer. (See“Precautions when starting and driving”(P.5-3).)

Fluid leaks: Check under the vehicle forfuel, oil, water or other fluid leaks after thevehicle has been parked for a while. Waterdripping from the air conditioner after useis normal. If you should notice any leaks orif gasoline fumes are evident, check for thecause and have it corrected immediately.

Inverter coolant lebel: Check the coolantlevel when the inverter is cold.

Radiator and hoses: Check the front of theradiator and clean off any dirt, insects,leaves, etc., that may have accumulated.Make sure the hoses have no cracks,deformation, rot or loose connections.

Underbody: The underbody is frequentlyexposed to corrosive substances such as

Page 328: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

those used on icy roads or to control dust.It is very important to remove thesesubstances, otherwise rust will form onthe floor pan, frame, fuel lines and aroundthe exhaust system. At the end of winter,the underbody should be thoroughlyflushed with plain water, being careful toclean those areas where mud and dirt mayaccumulate. For additional information,see “Cleaning exterior” (P.7-2).

Windshield washer fluid*: Check that thereis adequate fluid in the reservoir.

When performing any inspection or main-tenance work on your vehicle, always takecare to prevent serious accidental injury toyourself or damage to the vehicle. Thefollowing are general precautions whichshould be closely observed.

WARNING

. This vehicle has high voltage DC and ACsystems as well as a 12-volt system. DCand AC high voltage is very dangerousand can cause severe burns and electricshock that may result in serious injury ordeath.

. Never touch, disassemble, remove orreplace the high voltage parts, har-nesses and their connectors. High vol-tage cables are orange. Touching,disassembling, removing or replacingthose parts and harnesses can causesevere burns or electric shock that mayresult in serious injury or death.

. Never try to remove the service pluglocated in the trunk room. The serviceplug is used only when the vehicle isserviced by trained technicians wearingpersonal protection equipment and ispart of the high voltage system. Touch-

ing the service plug can cause severeburns or electric shock that may result inserious injury or death.

. The INFINITI Direct Response Hybrid®

System uses high voltage up to 408volts. The system can be hot while andafter starting. Be careful of both the highvoltage and the high temperature. Obeythe caution labels attached to thevehicle.

. Park the vehicle on a level surface, applythe parking brake securely and block thewheels to prevent the vehicle frommoving. Move the shift lever to P (Park).

. Be sure the ignition switch is in the OFFor LOCK position when performing anyparts replacement or repairs.

. The engine can start at any time withoutwarning when the hybrid system is inthe READY to drive mode. If you mustwork with the hybrid system in theREADY to drive mode, keep your hands,clothing, hair and tools away from fans,belts and any other parts that can move.

. It is advisable to secure or remove anyloose clothing and remove any jewelry,such as rings, watches, etc. beforeworking on your vehicle.

Maintenance and do-it-yourself 8-5

MAINTENANCE PRECAUTIONS

Page 329: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-6 Maintenance and do-it-yourself

. Always wear eye protection wheneveryou work on your vehicle.

. Your vehicle is equipped with an auto-matic engine cooling fan. It may come onat any time without warning, even if theignition key is in the OFF position andthe engine is not running. To avoidinjury, always disconnect the negativebattery cable of the 12-volt batterybefore working near the fan.

. If you must run the engine in anenclosed space such as a garage, besure there is proper ventilation forexhaust gases to escape.

. Never get under the vehicle while it issupported only by a jack. If it isnecessary to work under the vehicle,support it with safety stands.

. Keep smoking materials, flame andsparks away from the fuel tank and the12-volt battery.

CAUTION

. Do not work under the hood while theengine is hot. Turn the hybrid system offand wait until it cools down.

. Avoid direct contact with used engine oiland coolant. Improperly disposed engineoil, coolant, and/or other vehicle fluidscan damage the environment. Alwaysconform to local regulations for disposalof vehicle fluid.

. Never leave the engine or the transmis-sion related component harness connec-tor disconnected while the ignitionswitch is in the ON position.

. Never connect or disconnect the 12-voltbattery or any transistorized componentwhile the ignition switch is in the ONposition.

This “8. Maintenance and do-it-yourself”section gives instructions regarding onlythose items which are relatively easy for anowner to perform.

A genuine INFINITI Service Manual is alsoavailable. (See “Owner’s Manual/ServiceManual order information” (P.9-23).)

You should be aware that incomplete orimproper servicing may result in operatingdifficulties or excessive emissions, andcould affect your warranty coverage. If indoubt about any servicing, we recommendthat it be done by an INFINITI retailer.

Page 330: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVM0249X

VQ35HR ENGINETo remove the engine compartment cover,unhook the clips located as illustrated.

Maintenance and do-it-yourself 8-7

ENGINE COMPARTMENT CHECK LOCATIONS

Page 331: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-8 Maintenance and do-it-yourself

JVM0294X

1. Engine oil filler cap2. Brake fluid reservoir3. Fuse/fusible link holder4. Air cleaner5. Inverter coolant reservoir6. Radiator filler cap7. Engine coolant reservoir8. Engine oil dipstick9. Window washer fluid reservoir

The 12-volt battery is located inside thetrunk.

Page 332: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The engine cooling system is filled at thefactory with a pre-diluted mixture of 50%Genuine NISSAN Long Life Antifreeze/Cool-ant (blue) and 50% water to provide year-round anti-freeze and coolant protection.The anti-freeze solution contains rust andcorrosion inhibitors. Additional enginecooling system additives are not neces-sary.

WARNING

. Never remove the radiator cap when theengine is hot. Wait until the engine andradiator cool down. Serious burns couldbe caused by high pressure fluid escap-ing from the radiator. See precautions in“If your vehicle overheats” (P.6-7) of thismanual.

. The radiator is equipped with a pressuretype radiator cap. To prevent enginedamage, use only a genuine NISSANradiator cap.

CAUTION

. Never use any cooling system additivessuch as radiator sealer. Additives may

clog the cooling system and causedamage to the engine, transmissionand/or cooling system.

. When adding or replacing coolant, besure to use only Genuine NISSAN LongLife Antifreeze/Coolant (blue) or equiva-lent. Genuine NISSAN Long Life Anti-freeze/Coolant (blue) is pre-diluted toprovide antifreeze protection to −348F(−378C). If additional freeze protection isneeded due to weather where youoperate your vehicle, add GenuineNISSAN Long Life Antifreeze/Coolant(blue) concentrate following the direc-tions on the container. If an equivalentcoolant other than Genuine NISSAN LongLife Antifreeze/Coolant (blue) is used,follow the coolant manufacture’s instruc-tions to maintain minimum antifreezeprotection to −348F (−378C). The use ofother types of coolant solutions otherthan Genuine NISSAN Long Life Anti-freeze/Coolant (blue) or equivalent maydamage the engine cooling system.

. The life expectancy of the factory-fillcoolant is 105,000 miles (168,000 km)or 7 years. Mixing any other type ofcoolant other than Genuine NISSAN LongLife Antifreeze/Coolant (blue), including

Genuine NISSAN Long Life Antifreeze/Coolant (green), or the use of non-distilled water will reduce the lifeexpectancy of the factory-fill coolant.Refer to the INFINITI Service and Main-tenance Guide for more details.

Maintenance and do-it-yourself 8-9

ENGINE COOLING SYSTEM

Page 333: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-10 Maintenance and do-it-yourself

JVM0251X

CHECKING ENGINE COOLANT LEVELCheck the coolant level in the reservoirwhen the engine is cold. If the coolantlevel is below MIN *2 , open the reservoirtank cap and add coolant up to the MAX*1level. If the reservoir tank is empty, checkthe coolant level in the radiator when theengine is cold. If there is insufficientcoolant in the radiator, fill the radiatorwith coolant up to the filler opening andalso add it to the reservoir tank up to theMAX level *1 .

Tighten the cap securely after addingengine coolant.

If the cooling system requires coolantfrequently, have it checked by an INFINITIretailer.

CHANGING ENGINE COOLANTMajor cooling system repairs should beperformed by an INFINITI retailer. Theservice procedures can be found in theappropriate INFINITI Service Manual.

Improper servicing can result in reducedheater performance and engine overheat-ing.

WARNING

. To avoid the danger of being scalded,never change the coolant when theengine is hot.

. Never remove the radiator cap when theengine is hot. Serious burns could becaused by high pressure fluid escapingfrom the radiator.

. Avoid direct skin contact with usedcoolant. If skin contact is made, washthoroughly with soap or hand cleaner assoon as possible.

. Keep coolant out of reach of children andpets.

Engine coolant must be disposed ofproperly. Check your local regulations.

Page 334: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

The inverter cooling system is filled at thefactory with a pre-diluted mixture of 50%Genuine NISSAN Long Life Antifreeze/Cool-ant (blue) and 50% water to provide year-round anti-freeze and coolant protection.The antifreeze solution contains rust andcorrosion inhibitors. Additional invertercooling system additives are not neces-sary.

WARNING

. Never remove the coolant reservoir capwhen the engine and inverter are hot.Wait until the engine and inverter cooldown. Serious burns could be caused byhigh pressure fluid escaping from theradiator.

. The inverter reservoir is equipped with apressure type cap. To prevent engine andinverter damage, use only a genuineNISSAN inverter reservoir cap.

CAUTION

. Never use any additives in the coolantsuch as radiator sealer in the coolingsystem. This may cause damage to

electrical equipment such as the motorand inverter, and also to engine andtransmission.

. When adding or replacing coolant, besure to use only Genuine NISSAN LongLife Antifreeze/Coolant (blue) or equiva-lent. Genuine NISSAN Long Life Anti-freeze/Coolant (blue) is pre-diluted toprovide antifreeze protection to −348F(−378C). If additional freeze protection isneeded due to weather where youoperate your vehicle, add GenuineNISSAN Long Life Antifreeze/Coolant(blue) concentrate following the direc-tions on the container. If an equivalentcoolant other than Genuine NISSAN LongLife Antifreeze/Coolant (blue) is used,follow the coolant manufatururer’s in-structions to maintain minimum anti-freeze protection to −348F(−378C). Theuse of other types of coolant solutionsother than Genuine NISSAN Long LifeAntifreeze/Coolant (blue) or equivalentmay damage the inverter cooling sys-tem.

. The life expectancy of the factory-fillcoolant is 125,000 miles (200,000 km)or 15 years. Mixing any other type ofcoolant other than Genuine NISSAN Long

Life Antifreeze/Coolant (blue), includingGenuine NISSAN Long Life Antifreeze/Coolant (green), or the use of non-distilled water will reduce the lifeexpectancy of the factory-fill coolant.Refer to the INFINITI Service and Main-tenance Guide for more details.

Maintenance and do-it-yourself 8-11

INVERTER COOLING SYSTEM

Page 335: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-12 Maintenance and do-it-yourself

JVM0326X

CHECKING INVERTER COOLANT LE-VELCheck the coolant level in the reservoirwhen the engine and inverter are cold. Ifthe coolant level is below the MIN level*B ,add coolant to the MAX level *A .

If the inverter cooling system frequentlyrequires coolant, have it checked by anINFINITI retailer.

CHANGING INVERTER COOLANTAn INFINITI ratailer can change the invertercoolant. The service procedure can befound in the INFINITI Service Manual.

Improper servicing can result in inverteroverheating.

WARNING

. To avoid the danger of being scalded,never change the coolant when theinverter is hot.

. Never remove the cap when the inverteris hot. Serious burns could be caused byhigh pressure fluid escaping from theinverter coolant reservoir.

. Avoid direct skin contact with usedcoolant. If skin contact is made, washthoroughly with soap or hand cleaner assoon as possible.

. Keep coolant out of the reach of childrenand pets.

Inverter coolant must be disposed ofproperly. Check your local regulations.

SDI2045

CHECKING ENGINE OIL LEVEL1. Park the vehicle on a level surface and

apply the parking brake.

2. Run the engine until it reaches operat-ing temperature.

3. Turn off the engine. Wait more than 15minutes for the oil to drain back intothe oil pan.

4. Remove the dipstick and wipe it clean.Reinsert it all the way.

5. Remove the dipstick again and checkthe oil level. It should be within therange *1 . If the oil level is below *2 ,remove the oil filler cap and pour

ENGINE OIL

Page 336: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

recommended oil through the opening.Do not overfill *3 .

6. Recheck oil level with the dipstick.

It is normal to add some oil between oilmaintenance intervals or during the break-in period, depending on the severity ofoperating conditions.

CAUTION

Oil level should be checked regularly.Operating the engine with an insufficientamount of oil can damage the engine, andsuch damage is not covered by warranty.

CHANGING ENGINE OIL AND FILTER

Vehicle set-up1. Park the vehicle on a level surface and

apply the parking brake.

2. Run the engine until it reaches operat-ing temperature.

3. Turn the engine off and wait more than15 minutes.

4. Raise and support the vehicle using asuitable floor jack and safety jackstands.. Place the safety jack stands under

the vehicle jack-up points.. A suitable adapter should be at-

tached to the jack stand saddle.

5. Remove the plastic engine undercover.. Remove the small plastic clip at the

center point of the undercover.. Then remove the other bolts that

hold the undercover in place.

CAUTION

Make sure the correct lifting and supportpoints are used to avoid vehicle damage.

SDI2335

2WD models

SDI2047

AWD models

Maintenance and do-it-yourself 8-13

Page 337: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-14 Maintenance and do-it-yourself

Engine oil and filter1. Place a large drain pan under the drain

plug.

2. Remove the oil filler cap.

3. Remove the drain plug *1 with awrench and completely drain the oil.

CAUTION

Be careful not to burn yourself, as theengine oil is hot.

. Waste oil must be disposed ofproperly.

. Check your local regulations.

4. (Perform steps 4 to 7 only when theengine oil filter change is needed.)

Loosen the oil filter *2 with an oil filterwrench. Remove the oil filter by turningit by hand.

5. Wipe the engine oil filter mountingsurface with a clean rag.

CAUTION

Be sure to remove any old rubber gasketremaining on the mounting surface of the

engine. Failure to do so could lead to enginedamage.

6. Coat the gasket on the new filter withclean engine oil.

7. Screw in the oil filter clockwise until aslight resistance is felt, then tightenadditionally more than 2/3 turn.Oil filter tightening torque:11 to 15 ft-lb(14.7 to 20.5 N·m)

8. Clean and re-install the drain plug witha new washer. Securely tighten thedrain plug with a wrench.Drain plug tightening torque:22 to 29 ft-lb(29 to 39 N·m)

Do not use excessive force.

9. Refill engine with recommended oil andinstall the oil filler cap securely.

CAUTION

The dipstick must be inserted in place toprevent oil spillage from the dipstick holewhile filling the engine with oil.

See “Capacities and recommendedfuel/lubricants” (P.9-2) for drain andrefill capacity. The drain and refillcapacity depends on the oil tempera-ture and drain time. Use these specifi-cations for reference only. Always usethe dipstick to determine the properamount of oil in the engine.

10.Start the engine and check for leakagearound the drain plug and the oil filter.Correct as required.

11.Turn the engine off and wait more than15 minutes. Check the oil level with thedipstick. Add engine oil if necessary.

After the operation1. Install the engine undercover into

position as the following steps.

a. Pull the center of the small plasticclip out.

b. Hold the engine undercover intoposition.

c. Insert the clip through the under-cover into the hole in the frame, thenpush the center of the clip in to lockthe clip in place.

d. Install the other bolts that hold theundercover in place. Be careful not

Page 338: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

to strip the bolts or over-tightenthem.

2. Lower the vehicle carefully to theground.

3. Dispose of waste oil and filter properly.

WARNING

. Prolonged and repeated contact withused engine oil may cause skin cancer.

. Try to avoid direct skin contact with usedoil. If skin contact is made, washthoroughly with soap or hand cleaneras soon as possible.

. Keep used engine oil out of reach ofchildren.

When checking or replacement is required,we recommend an INFINITI retailer forservicing.

CAUTION

. Use only Genuine NISSAN Matic S ATF.Do not mix with other fluids.

. Using automatic transmission fluid otherthan Genuine NISSAN Matic S ATF willcause deterioration in driveability andautomatic transmission durability, andmay damage the automatic transmis-sion, which is not covered by the INFINITInew vehicle limited warranty.

For further brake fluid information, see“Capacities and recommended fuel/lubri-cants” (P.9-2) of this manual.

WARNING

. Use only new fluid from a sealedcontainer. Old, inferior or contaminatedfluid may damage the brake system. Theuse of improper fluids can damage thebrake system and affect the vehicle’sstopping ability.

. Clean the filler cap before removing.

. Brake fluid is poisonous and should bestored carefully in marked containers outof the reach of children.

CAUTION

Do not spill the fluid on painted surfaces.This will damage the paint. If fluid is spilled,wash the surface with water.

Maintenance and do-it-yourself 8-15

AUTOMATIC TRANSMISSION FLUID BRAKE FLUID

Page 339: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-16 Maintenance and do-it-yourself

JVM0053X

Check the fluid level in the reservoir. If thefluid is below the MIN line *2 or the brakewarning light comes on, add GenuineNISSAN Super Heavy Duty Brake Fluid orequivalent DOT 3 fluid up to the MAX line*1 . If fluid must be added frequently, thesystem should be checked by an INFINITIretailer.

JVM0253X

WARNING

Antifreeze is poisonous and should bestored carefully in marked containers outof the reach of children.

Fill the window washer fluid reservoirperiodically. Add window washer fluidwhen the low window washer fluid warningappears in the vehicle information display.

To fill the window washer fluid reservoir,lift the cap off the reservoir and pour thewindow washer fluid into the reservoiropening.

To check the window washer fluid level,use your finger to plug the hole *1 of thecap/tube assembly, then remove it fromthe reservoir. If there is no fluid in the tube,add fluid.

Add a washer solvent to the washer forbetter cleaning. In the winter season, add awindshield washer antifreeze. Follow themanufacturer’s instructions for the mixtureratio.

Refill the reservoir more frequently whendriving conditions require an increasedamount of window washer fluid.

Recommended fluid is Genuine NISSANWindshield Washer Concentrate Cleaner &Antifreeze or equivalent.

CAUTION

. Do not substitute engine anti-freezecoolant for window washer solution. Thismay result in damage to the paint.

. Do not fill the window washer reservoirwith washer fluid concentrates at fullstrength. Some methyl alcohol basedwasher fluid concentrates may perma-nently stain the grille if spilled whilefilling the window washer reservoir.

WINDOW WASHER FLUID

Page 340: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Pre-mix washer fluid concentrates withwater to the manufacturer’s recom-mended levels before pouring the fluidinto the window washer reservoir. Do notuse the window washer reservoir to mixthe washer fluid concentrate and water.

JVM0295X

The 12-volt battery *A is located on theleft hand side of the trunk behind anaccess panel.

. Keep the battery surface clean and dry.Clean the battery with a solution ofbaking soda and water.

. Make certain the terminal connectionsare clean and securely tightened.

. If the vehicle is not to be used for 30days or longer, disconnect the negative(-) battery terminal cable to preventdischarging it.

NOTE:

Care should be taken to avoid situationsthat can lead to potential 12-volt batterydischarge and potential no-start condi-tions such as:1. Installation or extended use of electro-

nic accessories that consume 12-voltbattery power when the engine is notrunning (Phone chargers, GPS, DVDplayers, etc.)

2. Vehicle is not driven regularly and/oronly driven short distances.

In these cases, the 12-volt battery mayneed to be charged to maintain 12-voltbattery health.

WARNING

. Do not expose the 12-volt battery toflames or electrical sparks. Hydrogengas generated by the 12-volt battery isexplosive. Do not allow battery fluid tocontact your skin, eyes, fabrics orpainted surfaces. After touching a 12-volt battery, do not touch or rub youreyes. Thoroughly wash your hands. Ifthe acid contacts your eyes, skin orclothing, immediately flush with water

Maintenance and do-it-yourself 8-17

12-VOLT BATTERY

Page 341: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-18 Maintenance and do-it-yourself

for at least 15 minutes and seek medicalattention.

. The hybrid vehicle uses a special bat-tery. If the 12-volt battery needs to bereplaced, use a 12-volt battery of thesame design. Using the wrong batterycan cause hydrogen gas to build up inthe vehicle, which could lead to anexplosion and personal injury.

. When working on or near a 12-voltbattery, always wear suitable eye pro-tection and remove all jewelry.

. Battery posts, terminals and relatedaccessories contain lead and lead com-pounds. Wash hands after handling.

. Keep the 12-volt battery out of the reachof children.

JVM0064M

A: Indicated in blueB: Indicated in redC: Indicated in white

CHECKING BATTERY FLUID LEVEL. *A indicates that the 12-volt battery is

OK.. *B indicates that the 12-volt battery

replacing is necessary.. *C indicates that the 12-volt battery

charging is necessary.If it is necessary to replace, contact anINFINITI retailer.

JUMP STARTINGIf jump starting is necessary, see “Jumpstarting” (P.6-5). If the INFINITI DirectResponse Hybrid® System does not startby jump starting, the 12-volt battery mayhave to be replaced. Contact an INFINITIretailer.

Page 342: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

Be sure the engine and the ignition switchare off and that the parking brake isengaged securely.

CAUTION

Be sure to use the correct socket to removethe spark plugs. An incorrect socket candamage the spark plugs. SDI2020

REPLACING SPARK PLUGSIf replacement is required, see an INFINITIretailer for servicing.

Iridium-tipped spark plugsIt is not necessary to replace the iridium-tipped spark plugs as frequently as theconventional type spark plugs since theywill last much longer. Follow the main-tenance schedule in “INFINITI Service andMaintenance Guide”, but do not reusethem by cleaning or regapping.

Always replace spark plugs with recom-mended or equivalent ones.

Maintenance and do-it-yourself 8-19

SPARK PLUGS

Page 343: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-20 Maintenance and do-it-yourself

JVM0254X

Remove the retainers*1 as illustrated andpull out the filter element *2 .

The filter element should not be cleanedand reused. Replace it according to themaintenance intervals. See “INFINITI Ser-vice and Maintenance Guide” for mainte-nance intervals. When replacing the filter,

wipe the inside of the air cleaner housingand the cover with a damp cloth.

WARNING

. Operating the engine with the aircleaner removed can cause you or othersto be burned. The air cleaner not onlycleans the air, it stops flame if theengine backfires. If it isn’t there, and theengine backfires, you could be burned.Do not drive with the air cleanerremoved, and be careful when workingon the engine with the air cleanerremoved.

. Never pour fuel into the throttle body orattempt to start the engine with the aircleaner removed. Doing so could resultin serious injury.

AIR CLEANER

Page 344: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

CLEANINGIf your windshield is not clear after usingthe windshield washer or if a wiper bladechatters when running, wax or othermaterial may be on the blade or wind-shield.

Clean the outside of the windshield with awasher solution or a mild detergent. Yourwindshield is clean if beads do not formwhen rinsing with clear water.

Clean each blade by wiping it with a clothsoaked in a washer solution or a milddetergent. Then rinse the blade with clearwater. If your windshield is still not clearafter cleaning the blades and using thewiper, replace the blades.

Worn windshield wiper blades can damagethe windshield and impair driver vision.

When a washer nozzle is cloggedSee an INFINITI retailer if a washer nozzle isclogged or any malfunction occurs. Do notattempt to clean the nozzle using a needleor a pin. Doing so may damage the nozzle.

SDI2048

REPLACINGReplace the wiper blades if they are worn.

Before replacing the wiper blades, thewiper should be in the fully up positionto avoid scratching the engine hood ordamaging the wiper arm. To pull up thewiper arm, see “Windshield wiper andwasher switch” (P.2-38).

1. Pull the wiper arm.

2. Push the release tab *A , and thenmove the wiper blade down the wiperarm *1 while pushing the release tabto remove.

3. Insert the new wiper blade onto thewiper arm until a click sounds.

4. Rotate the wiper blade so the dimple isin the groove.

CAUTION

. After wiper blade replacement, returnthe wiper arm to its original position;

otherwise it may be damaged when thehood is opened.

. Make sure the wiper blades contact theglass; otherwise the arm may be da-

Maintenance and do-it-yourself 8-21

WINDSHIELD WIPER BLADES

Page 345: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-22 Maintenance and do-it-yourself

maged from wind pressure.If the brakes do not operate properly, havethe brakes checked by an INFINITI retailer.

SELF-ADJUSTING BRAKESYour vehicle is equipped with self-adjust-ing brakes.

The disc-type brakes self-adjust every timethe brake pedal is applied.

WARNING

See an INFINITI retailer for a brake systemcheck if the brake pedal height does notreturn to normal.

BRAKE PAD WEAR WARNINGThe disc brake pads have audible wearwarnings. When a brake pad requiresreplacement, it will make a high pitchedscraping sound when the vehicle is inmotion. This scraping sound will first occuronly when the brake pedal is depressed.After more wear of the brake pad, thesound will always be heard even if thebrake pedal is not depressed. Have thebrakes checked as soon as possible if thewear warning sound is heard.

Under some driving or climate conditions,

occasional brake squeak, squeal or othernoise may be heard. Occasional brakenoise during light to moderate stops isnormal and does not affect the function orperformance of the brake system.

Proper brake inspection intervals shouldbe followed. For additional information,see the maintenance log section of your“INFINITI Service and Maintenance Guide”for maintenance intervals.

BRAKES

Page 346: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVM0255X

Engine compartment

JVM0322X

Trunk

ENGINE COMPARTMENT AND TRUNK

CAUTION

Never use a fuse of a higher or loweramperage rating than that specified on thefuse box cover. This could damage theelectrical system or cause a fire.

If any electrical equipment does notoperate, check for an open fuse.

1. Be sure the ignition switch is pushed tothe OFF or LOCK position and theheadlight switch is turned to OFF.

2. Open the engine hood or trunk lid andto access the cover on the fuse/fusiblelink holder.

3. Remove the fuse/fusible link holdercover.

4. Remove the fuse with the fuse puller.

SDI1754

5. If the fuse is open *A , replace it with anew fuse *B . Spare fuses are stored inthe passenger compartment fuse box.

6. If a new fuse also opens, have theelectrical system checked and repairedby an INFINITI retailer.

Fusible linksIf any electrical equipment does notoperate and fuses are in good condition,check the fusible links. If any of thesefusible links are melted, replace only withgenuine INFINITI parts.

Maintenance and do-it-yourself 8-23

FUSES

Page 347: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-24 Maintenance and do-it-yourself

JVM0256X

PASSENGER COMPARTMENT

CAUTION

Never use a fuse of a higher or loweramperage rating than that specified on thefuse box cover. This could damage theelectrical system or cause a fire.

If any electrical equipment does notoperate, check for an open fuse.

1. Be sure the ignition switch is pushed tothe OFF or LOCK position and theheadlight switch is turned to OFF.

2. Open the fuse box lid.

3. Remove the fuse with the fuse puller*A .

4. If the fuse is open, replace it with a newfuse.

5. If a new fuse also opens, have theelectrical system checked and repairedby an INFINITI retailer. Spare fuses arestored in the fuse box.

JVM0257X

Extended storage fuse switch (if soequipped)To reduce 12-volt battery drain, the ex-tended storage fuse switch comes from thefactory switched off. Prior to delivery ofyour vehicle, the switch is pushed in(switched on) and should always remainon.

If the extended storage fuse switch is notpushed in (switched on), the “ShippingMode On, Push Storage Fuse” warning mayappear in the vehicle information display.See “22. Extended storage fuse warning”(P.2-27).

Page 348: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

If any electrical equipment does notoperate, remove the extended storage fuseswitch and check for an open fuse.

NOTE:

If the extended storage fuse switch mal-functions or if the fuse is open, it is notnecessary to replace the switch. In thiscase, remove the extended storage fuseswitch and replace it with a new fuse ofthe same rating.How to remove the extended storage fuseswitch:

1. To remove the extended storage fuseswitch, be sure the ignition switch is inthe OFF or LOCK position.

2. Be sure the headlight switch is in theOFF position.

3. Remove the fuse box cover.

4. Pinch the locking tabs *1 found oneach side of the storage fuse switch.

5. Pull the storage fuse switch straight outfrom the fuse box *2 .

CAUTION

Be careful not to allow children to swallowthe battery and removed parts.

JVM0317X

To replace the battery:

1. Release the lock knob at the back of theIntelligent Key and remove the mechan-ical key.

2. Insert a flat-blade screwdriver wrappedwith a cloth into the slit of the cornerand twist it to separate the upper part

Maintenance and do-it-yourself 8-25

INTELLIGENT KEY BATTERY REPLACEMENT

Page 349: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-26 Maintenance and do-it-yourself

from the lower part.

3. Replace the battery with a new one.

Recommended battery:

CR2025 or equivalent. Do not touch the internal circuit and

electric terminals as it could cause amalfunction.

. Hold the battery by the edges.Holding the battery across the con-tact points will seriously deplete thestorage capacity.

. Make sure that the + side faces thebottom of the case.

SDI2452

4. Align the tips of the upper and lowerparts *1 , and then push them together*2 until it is securely closed.

5. Operate the buttons to check itsoperation.

See an INFINITI retailer if you need anyassistance for replacement.

FCC Notice:

For USA:

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept any interfer-

ence received, including interference thatmay cause undesired operation.

NOTE:

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’s authorityto operate the equipment.

For Canada:

This device complies with RSS-210 ofIndustry Canada. Operation is subject tothe following two conditions: (1) thisdevice may not cause interference, and(2) this device must accept any interfer-ence, including interference that maycause undesired operation of the device.

Page 350: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVM0272X

1. Headlight (high-beam)2. Headlight (low-beam)3. Map light4. Front side marker light5. Rear personal light6. Side turn signal light7. Front turn signal light8. Fog light9. Parking light10. Step light11. Courtesy light12. High-mounted stop light13. Back-up light14. Rear turn signal light15. Stop/tail light16 Rear side marker light17 License plate light18 Trunk light

Maintenance and do-it-yourself 8-27

LIGHTS

Page 351: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-28 Maintenance and do-it-yourself

EXTERIOR AND INTERIOR LIGHTSItem Wattage (W) Bulb No.

Headlight*

High/Low beams LED —

Front turn signal light* LED —

Front fog light* LED —

Parking light* LED —

Side marker light* LED —

Rear combination light*

back-up* LED —

turn signal 21 WY21W

stop/tail/side marker* LED —

License plate light 5 W5W

Map light* LED —

Rear personal light 8 —

Vanity mirror light 2 —

Step light 5 —

Trunk light 3.4 —

Courtesy light* LED —

High-mounted stop light* LED —

*: See an INFINITI retailer for replacement.

NOTE: Always check with the Parts Depart-ment at an INFINITI retailer for the latestinformation about parts.

Replacement proceduresAll other lights are either type A, B, C, D, Eor F. When replacing a bulb, first removethe lens and/or cover.

Page 352: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SDI1679

SDI2031

Rear personal light

SDI1839

Vanity mirror light

SDI2330

Step light

SDI1258A

Trunk light

Maintenance and do-it-yourself 8-29

Page 353: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-30 Maintenance and do-it-yourself

If you have a flat tire, see “Flat tire” (P.6-3).

TIRE PRESSURE

Tire Pressure Monitoring System(TPMS)This vehicle is equipped with the TirePressure Monitoring System (TPMS). Itmonitors tire pressure of all tires exceptthe spare. When the low tire pressurewarning light is lit and the “Tire PressureLow - Add Air” warning appears in thevehicle information display, one or more ofyour tires is significantly under-inflated.

The TPMS will activate only when thevehicle is driven at speeds above 16 MPH(25 km/h). Also, this system may notdetect a sudden drop in tire pressure (forexample a flat tire while driving).

For more details, see “Low tire pressurewarning light” (P.2-15),“Tire Pressure Mon-itoring System (TPMS)” (P.5-4) and “TirePressure Monitoring System (TPMS)” (P.6-3).

Tire inflation pressureCheck the pressure of the tires(including the spare) often and al-

ways prior to long distance trips. Therecommended tire pressure specifi-cations are shown on the Tire andLoading Information label under the“Cold Tire Pressure” heading. TheTire and Loading Information label isaffixed to the driver side center pillar.Tire pressures should be checkedregularly because:

. Most tires naturally lose air overtime.

. Tires can lose air suddenly whendriven over potholes or otherobjects or if the vehicle strikes acurb while parking.

The tire pressures should be checkedwhen the tires are cold. The tires areconsidered COLD after the vehiclehas been parked for 3 or more hours,or driven less than 1 mile (1.6 km) atmoderate speeds.

TPMS with Tire Inflation Indicatorprovides visual and audible signalsoutside the vehicle for inflating thetires to the recommended COLD tire

pressure. (See “TPMS with Tire Infla-tion Indicator” (P.5-7) about theTPMS with Tire Inflation Indicator.)

Incorrect tire pressure, includingunder inflation, may adversely affecttire life and vehicle handling.

WARNING

. Improperly inflated tires can failsuddenly and cause an accident.

. The Gross Vehicle Weight rating(GVWR) is located on the F.M.V.S.S./C.M.V.S.S. label. The vehicleweight capacity is indicated onthe Tire and Loading Informationlabel. Do not load your vehiclebeyond this capacity. Overloadingyour vehicle may result in reducedtire life, unsafe operating condi-tions due to premature tire failure,or unfavorable handling character-istics and could also lead to aserious accident. Loading beyondthe specified capacity may also

WHEELS AND TIRES

Page 354: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

result in failure of other vehiclecomponents.

. Before taking a long trip, orwhenever you heavily load yourvehicle, use a tire pressure gaugeto ensure that the tire pressuresare at the specified level.

. For additional information regard-ing tires, refer to “Important TireSafety Information” (US) or “TireSafety Information” (Canada) inthe Warranty Information Booklet.

SDI2567

Tire and Loading Information label*1 Seating capacity: The maximum

number of occupants that can beseated in the vehicle.

*2 Vehicle load limit: See “Vehicleloading information” (P.9-16).

*3 Original size: The size of the tiresoriginally installed on the vehicleat the factory.

*4 Cold tire pressure: Inflate thetires to this pressure when thetires are cold. Tires are consid-

Maintenance and do-it-yourself 8-31

Page 355: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-32 Maintenance and do-it-yourself

ered COLD after the vehicle hasbeen parked for 3 or more hours,or driven less than 1 mile (1.6km) at moderate speeds. Therecommended cold tire inflationis set by the manufacturer toprovide the best balance of tirewear, vehicle handling, driveabil-ity, tire noise, etc., up to thevehicle’s GVWR.

*5 Tire size — see “Tire labeling”(P.8-33).

*6 Spare tire size or compact sparetire size (if so equipped)

SDI1949

Checking the tire pressure1. Remove the valve stem cap from

the tire.

2. Press the pressure gaugesquarely onto the valve stem. Donot press too hard or force thevalve stem sideways, or air willescape. If the hissing sound of airescaping from the tire is heardwhile checking the pressure, re-position the gauge to eliminatethis leakage.

3. Remove the gauge.

4. Read the tire pressure on thegauge stem and compare it tothe specification shown on theTire and Loading Information la-bel.

5. Add air to the tire as needed. Iftoo much air is added, press thecore of the valve stem briefly withthe tip of the gauge stem torelease pressure. Recheck thepressure and add or release airas needed.

6. Install the valve stem cap.

7. Check the pressure of all othertires, including the spare.

Page 356: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SIZECOLD TIREINFLATIONPRESSURE

FRONTORIGINAL

TIRE

P225/55RF1795V

240 kPa,35 PSI

P245/40RF1994V

240 kPa,35 PSI

245/40RF1994W

240 kPa,35 PSI

REAR ORI-GINAL TIRE

P225/55RF1795V

240 kPa,35 PSI

P245/40RF1994V

240 kPa,35 PSI

245/40RF1994W

240 kPa,35 PSI

SDI1575

Example

TIRE LABELINGFederal law requires tire manufac-turers to place standardized informa-tion on the sidewall of all tires. Thisinformation identifies and describesthe fundamental characteristics ofthe tire and also provides the tireidentification number (TIN) for safetystandard certification. The TIN can beused to identify the tire in case of arecall.

SDI1606

Example

*1 Tire size (example: P215/60R1694H)

1. P: The “P” indicates the tire isdesigned for passenger vehicles.(Not all tires have this informa-tion.)

2. Three-digit number (215): Thisnumber gives the width in milli-meters of the tire from sidewalledge to sidewall edge.

3. Two-digit number (60): This num-ber, known as the aspect ratio,

Maintenance and do-it-yourself 8-33

Page 357: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-34 Maintenance and do-it-yourself

gives the tire’s ratio of height towidth.

4. R: The “R” stands for radial.

F: The “F” after “R” indicates Self-Supporting type run-flat tire.

5. Two-digit number (16): This num-ber is the wheel or rim diameter ininches.

6. Two- or three-digit number (94):This number is the tire’s loadindex. It is a measurement ofhow much weight each tire cansupport. You may not find thisinformation on all tires because itis not required by law.

7. H: Tire speed rating. You shouldnot drive the vehicle faster thanthe tire speed rating.

SDI1607

Example

*2 TIN (Tire Identification Number)for a new tire (example: DOT XX XXXXX XXXX)

1. DOT: Abbreviation for the “Depart-ment of Transportation”. The sym-bol can be placed above, below orto the left or right of the TireIdentification Number.

2. Two-digit code: Manufacturer’sidentification mark

3. Two-digit code: Tire size

4. Three-digit code: Tire type code(Optional)

5. Three-digit code: Date of Manu-facture

6. Four numbers represent the weekand year the tire was built. Forexample, the numbers 3103means the 31st week of 2003. Ifthese numbers are missing, thenlook on the other sidewall of thetire.

*3 Tire ply composition and material

The number of layers or plies ofrubber-coated fabric in the tire.

Tire manufacturers also must indi-cate the materials in the tire, whichinclude steel, nylon, polyester, andothers.

*4 Maximum permissible inflationpressure

This number is the greatest amountof air pressure that should be put inthe tire. Do not exceed the maximum

Page 358: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

permissible inflation pressure.

*5 Maximum load rating

This number indicates the maximumload in kilograms and pounds thatcan be carried by the tire. Whenreplacing the tires on the vehicle,always use a tire that has the sameload rating as the factory installedtire.

*6 Term of “tubeless” or “tube type”

Indicates whether the tire requires aninner tube (“tube type”) or not(“tubeless”).

*7 The word “radial”

The word “radial” is shown, if the tirehas radial structure.

*8 Manufacturer or brand name

Manufacturer or brand name isshown.

Other tire-related terminology:

In addition to the many terms thatare defined throughout this section,

Intended Outboard Sidewall is (1) thesidewall that contains a whitewall,bears white lettering or bears manu-facturer, brand and/or model namemolding that is higher or deeper thanthe same molding on the other side-wall of the tire, or (2) the outwardfacing sidewall of an asymmetricaltire that has a particular side thatmust always face outward whenmounted on a vehicle.

TYPES OF TIRES

WARNING

. When changing or replacing tires, besure all four tires are of the same type(Example: Summer, All Season or Snow)and construction. An INFINITI retailermay be able to help you with informationabout tire type, size, speed rating andavailability.

. Replacement tires may have a lowerspeed rating than the factory equippedtires, and may not match the potentialmaximum vehicle speed. Never exceed

the maximum speed rating of the tire.

. Replacing tires with those not originallyspecified by INFINITI could affect theproper operation of the TPMS.

. For additional information regardingtires, refer to “Important Tire SafetyInformation” (US) or “Tire Safety Infor-mation” (Canada) in the Warranty In-formation Booklet.

All season tiresINFINITI specifies all season tires on somemodels to provide good performance allyear, including snowy and icy road condi-tions. All Season tires are identified by ALLSEASON and/or M&S (Mud and Snow) onthe tire sidewall. Snow tires have bettersnow traction than All Season tires andmay be more appropriate in some areas.

Summer tiresINFINITI specifies summer tires on somemodels to provide superior performance ondry roads. Summer tire performance issubstantially reduced in snow and ice.Summer tires do not have the tire tractionrating M&S on the tire sidewall.

If you plan to operate your vehicle in snowy

Maintenance and do-it-yourself 8-35

Page 359: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-36 Maintenance and do-it-yourself

or icy conditions, INFINITI recommends theuse of SNOW tires or ALL SEASON tires onall four wheels.

Snow tiresIf snow tires are needed, it is necessary toselect tires equivalent in size and loadrating to the original equipment tires. Ifyou do not, it can adversely affect thesafety and handling of your vehicle.

Generally, snow tires will have lower speedratings than factory equipped tires andmay not match the potential maximumvehicle speed. Never exceed the maximumspeed rating of the tire.

If you install snow tires, they must be thesame size, brand, construction and treadpattern on all four wheels.

For additional traction on icy roads,studded tires may be used. However, someU.S. states and Canadian provinces prohi-bit their use. Check local, state andprovincial laws before installing studdedtires. Skid and traction capabilities ofstudded snow tires, on wet or dry surfaces,may be poorer than that of non-studdedsnow tires.

Run-flat tiresYour vehicle is equipped with run-flat tires.You can continue driving to a safe locationeven if they are punctured. Always use run-flat tires of the specified size on all fourwheels. Mixing tire sizes or constructionmay reduce vehicle handling stability. Ifnecessary, contact an INFINITI retailer forassistance.

Frequently check the tire pressure andadjust pressure of each tire properly. Thetire pressure can be also checked in thevehicle information display.

It can be difficult to tell if a run-flat tire isunder-inflated or flat. Check the tirepressures as described earlier in thissection. If the tire becomes under-inflatedwhile driving, the low tire pressure warninglight will illuminate. If the tire becomes flatwhile driving, the low tire pressure warninglight and the “Flat Tire - Visit dealer”warning will appear.

Low tire pressure:

If the vehicle is being driven with low tirepressure, the low tire pressure warninglight will illuminate.

Flat tire:

If the vehicle is being driven with one ormore flat tires, the low tire pressurewarning light will illuminate continuouslyand a chime will sound for 10 seconds. A“Flat Tire - Visit dealer” warning alsoappears in the vehicle information display.

The chime will only sound at the firstindication of a flat tire and the warninglight will illuminate continuously. When theflat tire warning is activated, have thesystem reset and the tire checked andreplaced if necessary by an INFINITI retai-ler. Even if the tire is inflated to thespecified COLD tire pressure, the warninglight will continue to illuminate until thesystem is reset by an INFINITI retailer.

If the low tire pressure warning lightilluminates continuously and the “Flat Tire- Visit dealer” warning appears in thevehicle information display:

. Do not exceed 50 MPH (80 km/h).

. Increase your following distance toallow for increased stopping distances.

. Avoid sudden maneuvers, hard corner-ing and hard braking.

Page 360: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WARNING

. Although you can continue driving with apunctured run-flat tire, remember thatvehicle handling stability is reduced,which could lead to an accident andpersonal injury. Also, driving a longdistance at high speeds may damagethe tire.

. Do not drive at speeds above 50 MPH(80 km/h) and do not drive more thanapproximately 93 miles (150 km) with apunctured run-flat tire. The actual dis-tance the vehicle can be driven on a flattire depends on outside temperature,vehicle load, road conditions and otherfactors.

. Drive safely at reduced speeds. Avoidhard cornering or braking, which maycause you to lose control of the vehicle.

. If you detect any unusual sounds orvibrations while driving with a puncturedrun-flat tire, pull off the road to a safelocation and stop the vehicle as soon aspossible. The tire may be seriouslydamaged and need to be replaced.

CAUTION

. Never install tire chains on a puncturedrun-flat tire, as this could damage yourvehicle.

. Avoid driving over any projection orpothole, as the clearance between thevehicle and the ground is smaller thannormal.

. Do not enter an automated car wash witha punctured run-flat tire.

. Have the punctured tire inspected by anINFINITI retailer or other authorizedrepair shop. Replace the tire as soonas possible if the tire is seriouslydamaged.

TIRE CHAINSUse of tire chains may be prohibitedaccording to location. Check the local lawsbefore installing tire chains. When instal-ling tire chains, make sure they are theproper size for the tires on your vehicle andare installed according to the chain man-ufacturer’s suggestions. Use only SAEClass S chains. Class “S” chains are usedon vehicles with restricted tire to vehicle

clearance. Vehicles that can use Class “S”chains are designed to meet the SAEstandard minimum clearances betweenthe tire and the closest vehicle suspensionor body component required to accommo-date the use of a winter traction device (tirechains or cables). The minimum clearancesare determined using the factory equippedtire size. Other types may damage yourvehicle. Use chain tensioners when recom-mended by the tire chain manufacturer toensure a tight fit. Loose end links of thetire chain must be secured or removed toprevent the possibility of whipping actiondamage to the fenders or underbody. Ifpossible, avoid fully loading your vehiclewhen using tire chains. In addition, drive ata reduced speed. Otherwise, your vehiclemay be damaged and/or vehicle handlingand performance may be adversely af-fected.

Tire chains must be installed only on therear wheels and not on the front wheels.

Never install tire chains on a puncturedrun-flat tire, as this could damage yourvehicle.

Do not use tire chains on dry roads. Drivingwith tire chains in such conditions cancause damage to the various mechanisms

Maintenance and do-it-yourself 8-37

Page 361: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-38 Maintenance and do-it-yourself

of the vehicle due to some overstress.

SDI1662

CHANGING WHEELS AND TIRES

Tire rotationINFINITI recommends rotating thetires every 5,000 miles (8,000 km).(See “Jacking up the vehicle andreplacing tires” (P.8-40) for tire re-placing procedures.)

As soon as possible, tighten thewheel nuts to the specified torquewith a torque wrench.

Wheel nut tightening torque:80 ft-lb (108 N·m)

The wheel nuts must be kept tigh-tened to the specification at alltimes. It is recommended that wheelnuts be tightened to the specifica-tion at each tire rotation interval.

WARNING

. After rotating the tires, check andadjust the tire pressure.

. Retighten the wheel nuts whenthe vehicle has been driven for600 miles (1,000 km) (also incases of a flat tire, etc.).

. For additional information regard-ing tires, refer to “Important TireSafety Information” (US) or “TireSafety Information” (Canada) inthe Warranty Information Booklet.

Page 362: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SDI1663

1. Wear indicator2. Wear indicator location mark

Tire wear and damage

WARNING

. Tires should be periodically in-spected for wear, cracking, bul-ging or objects caught in thetread. If excessive wear, cracks,bulging or deep cuts are found,the tire(s) should be replaced.

. The original tires have built-intread wear indicators. When wearindicators are visible, the tire(s)should be replaced.

. Tires degrade with age and use.Have tires, including the spare,over 6 years old checked by aqualified technician, becausesome tire damage may not beobvious. Replace the tires asnecessary to prevent tire failureand possible personal injury.

. For additional information regard-ing tires, refer to “Important TireSafety Information” (US) or “TireSafety Information” (Canada) inthe Warranty Information Booklet.

Replacing wheels and tiresWhen replacing a tire, use the same size,tread design, speed rating and load carry-ing capacity as originally equipped. (See“Specifications” (P.9-8) for recommendedtypes and sizes of tires and wheels.)

WARNING

. The use of tires other than thoserecommended or the mixed use of tiresof different brands, construction (bias,bias-belted, radial or run-flat), or treadpatterns can adversely affect the ride,braking, handling, ground clearance,body-to-tire clearance, tire chain clear-ance, speedometer calibration, head-light aim and bumper height. Some ofthese effects may lead to accidents andcould result in serious personal injury.

. For Two-Wheel Drive (2WD) models, ifyour vehicle was originally equippedwith 4 tires that were the same sizeand you are only replacing 2 of the 4tires, install the new tires on the rearaxle. Placing new tires on the front axlemay cause loss of vehicle control insome driving conditions and cause anaccident and personal injury.

. If the wheels are changed for anyreason, always replace with wheelswhich have the same off-set dimension.Wheels of a different off-set could causepremature tire wear, degrade vehiclehandling characteristics and/or interfer-

Maintenance and do-it-yourself 8-39

Page 363: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-40 Maintenance and do-it-yourself

ence with the brake discs/drums. Suchinterference can lead to decreased brak-ing efficiency and/or early brake pad/shoe wear. See “Wheels and tires” (P.9-9) of this manual for wheel off-setdimensions.

. When r a wheel is replaced, the TPMSwill not function and the low tirepressure warning light will flash forapproximately 1 minute. The light willremain on after 1 minute. Contact yourINFINITI retailer as soon as possible fortire replacement and/or system reset-ting.

. Replacing tires with those not originallyspecified by INFINITI could affect theproper operation of the TPMS.

. Do not install a damaged or deformedwheel or tire even if it has been repaired.Such wheels or tires could have struc-tural damage and could fail withoutwarning.

. The use of retread tire is not recom-mended.

. For additional information regardingtires, refer to “Important Tire SafetyInformation” (US) or “Tire Safety Infor-mation” (Canada) in the Warranty In-

formation Booklet.

Intelligent All-Wheel Drive (AWD)models

CAUTION

Always use tires of the same type, size,brand, construction (bias, bias-belted orradial), and tread pattern on all four wheels.Failure to do so may result in a circumfer-ence difference between tires on the frontand rear axles which will cause excessivetire wear and may damage the transmission,transfer case and differential gears.

If excessive tire wear is found, it isrecommended that all four tires be re-placed with tires of the same size, brand,construction and tread pattern. The tirepressure and wheel alignment should alsobe checked and corrected as necessary.Contact an INFINITI retailer.

Wheel balanceUnbalanced wheels may affect vehiclehandling and tire life. Even with regularuse, wheels can get out of balance. There-

fore, they should be balanced as required.

Wheel balance service should be per-formed with the wheels off the vehicle.Spin balancing the wheels on the vehiclecould lead to mechanical damage.

For additional information regarding tires,refer to “Important Tire Safety Information”(US) or “Tire Safety Information” (Canada)in the INFINITI Warranty Information Book-let.

Care of wheelsSee “Cleaning exterior” (P.7-2) for detailsabout care of the wheels.

JACKING UP THE VEHICLE ANDREPLACING TIRESYour vehicle is equipped with run-flat tiresand you can continue driving to a safelocation even if they are punctured. (See“Run-flat tires” (P.6-4) and “Run-flat tires”(P.8-36).)

This section contains the informationabout the vehicle jack-up procedures andthe tire replacement.

NOTE:

Jacking tools are not equipped as standardwith this vehicle. Contact an INFINITI

Page 364: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

retailer about acquiring the tools.

WARNING

. Make sure the parking brake is securelyapplied and the transmission into the P(Park) position.

. Never change tires when the vehicle ison a slope, ice or slippery areas. This ishazardous.

. Never change tires if oncoming traffic isclose to your vehicle. Wait for profes-sional road assistance. MCE0001A

Blocking wheelsPlace suitable blocks *1 at both the frontand back of the wheel diagonally oppositethe flat tire to prevent the vehicle frommoving when it is jacked up.

WARNING

Be sure to block the wheel as the vehiclemay move and result in personal injury.

Jacking up the vehicle and remov-ing a tire

WARNING

. Never get under the vehicle while it issupported only by the jack. If it isnecessary to work under the vehicle,support it with safety stands.

. Use the correct jack-up points. Never useany other part of the vehicle for jacksupport.

. Never jack up the vehicle more thannecessary.

. Never use blocks on or under the jack.

. Do not start or run the INFINITI DirectResponse Hybrid® System while vehicleis on the jack, as it may cause thevehicle to move. This is especially truefor vehicles with limited slip differen-tials.

. Do not allow passengers to stay in thevehicle while it is on the jack.

Maintenance and do-it-yourself 8-41

Page 365: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-42 Maintenance and do-it-yourself

Carefully read the caution label attached tothe jack body and the following instruc-tions.

CE1089-A

Jack-up point1. Place the jack directly under the jack-up

point as illustrated so the top of thejack contacts the vehicle at the jack-uppoint. Align the jack head between thetwo notches in the front or the rear asshown. Also fit the groove of the jackhead between the notches as shown.

The jack should be used on level firmground.

Page 366: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

SCE0504

2. Loosen each wheel nut one or two turnsby turning counterclockwise with thewheel nut wrench. Do not remove thewheel nuts until the tire is off theground.

3. Carefully raise the vehicle until the tireclears the ground. To lift the vehicle,securely hold the jack lever and rodwith both hands as shown above.Remove the wheel nuts, and thenremove the tire.

Installing a tire1. Clean any mud or dirt from the surface

between the wheel and hub.

2. Carefully put the tire on and tighten thewheel nuts finger tight.

3. With the wheel nut wrench, tightenwheel nuts alternately and evenly in thesequence as illustrated (*1 , *2 , *3 ,*4 , *5 ) until they are tight.

4. Lower the vehicle slowly until the tiretouches the ground. Then, with thewheel nut wrench, tighten the wheelnuts securely in the sequence asillustrated. Lower the vehicle comple-tely.

WARNING

. Incorrect wheel nuts or improperly tigh-tened wheel nuts can cause the wheel tobecome loose or come off. This couldcause an accident.

. Do not use oil or grease on the wheelstuds or nuts. This could cause the nutsto become loose.

. Retighten the wheel nuts when thevehicle has been driven for 600 miles(1,000 km).

. As soon as possible, tighten thewheel nuts to the specified torquewith a torque wrench.Wheel nut tightening torque:80 ft-lb (108 N·m)

The wheel nuts must be kept tigh-tened to specification at all times. Itis recommended that wheel nuts betightened to specifications at eachlubrication interval.

. Adjust tire pressure to the COLDpressure.

COLD tire pressure:

Maintenance and do-it-yourself 8-43

Page 367: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

8-44 Maintenance and do-it-yourself

After the vehicle has been parkedfor three hours or more or drivenless than 1 mile (1.6 km).

COLD tire pressures are shown onthe Tire and Loading Informationlabel affixed to the driver side centerpillar.

Securely store the jacking tools in thevehicle.

Page 368: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9 Technical and consumer information

Capacities and recommended fuel/lubricants....... 9-2Fuel information .............................................. 9-4Engine oil and oil filter recommendation ......... 9-6Air conditioning system refrigerant andlubricant recommendations ............................. 9-7

Specifications ...................................................... 9-8Engine............................................................. 9-8Wheels and tires ............................................. 9-9Dimensions ................................................... 9-10

When traveling or registering your vehicle inanother country ................................................. 9-11Vehicle identification ......................................... 9-11

Vehicle Identification Number (VIN) plate....... 9-11Vehicle identification number(chassis number)........................................... 9-11Engine serial number .................................... 9-12F.M.V.S.S./C.M.V.S.S. certification label .......... 9-12Emission control information label ................ 9-12Tire and loading information label................. 9-13Air conditioner specification label.................. 9-13

Installing front license plate.............................. 9-14Removing air deflectors..................................... 9-15Vehicle loading information............................... 9-16

Terms .......................................................... 9-16Vehicle load capacity ................................... 9-17Loading tips................................................. 9-18Measurement of weights.............................. 9-18

Towing a trailer ................................................. 9-19Flat towing................................................... 9-19

Uniform tire quality grading .............................. 9-19Treadwear.................................................... 9-19Traction AA, A, B and C................................ 9-20Temperature A, B and C............................... 9-20

Emission control system warranty ..................... 9-20Reporting safety defects.................................... 9-21Readiness for Inspection/Maintenance (I/M) test(US only)........................................................... 9-22Event Data Recorders (EDR) ............................... 9-23Owner’s Manual/Service Manualorder information .............................................. 9-23

Page 369: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-2 Technical and consumer information

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedureinstructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.

Capacity (Approximate)Recommended specifications

US measure Imp measure Liter

Fuel 20 gal 16-5/8 gal 76 See “Fuel information” (P.9-4).

Engine oil*1Drain and refill

With oil filter change 5-1/8 qt 4-3/8 qt 4.9 . Genuine NISSAN engine oil or equivalent*2. Engine oil with API Certification Mark*3. Viscosity SAE 5W-30

Without oil filter change4-7/8 qt 4.0 qt 4.6

Engine cooling systemWith reservoir 11-3/8 qt 9-1/2 qt 10.8 Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent

Reservoir 1 qt 3/4 qt 0.9

Inverter cooling systemWith reservoir 2-1/2 qt 2-1/8 qt 2.4

Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalentReservoir 3/8 qt 3/8 qt 0.4

Automatic transmission fluid — — — Genuine NISSAN Matic S ATF*4

Differential gear oil — — —

Front: Genuine NISSAN Differential Oil Hypoid Super GL-5 80W-90 or API GL-5, Viscosity SAE80W-90*5Rear: API GL-5 Synthetic Gear Oil, Viscosity SAE 75W-90*6

Transfer fluid — — — Genuine NISSAN Matic J ATF*7

Brake fluid Refill to the proper oil level according to the instructions in the “8.Maintenance and do-it-yourself” section.

Genuine NISSAN Super Heavy Duty Brake Fluid*8 or equivalent DOT 3

Multi-purpose grease — — — NLGI No. 2 (Lithium soap base)

Air conditioning system refrigerant — — — HFC-134a (R-134a)*9

Air conditioning system lubricants — — — AE-10

Window washer fluid — — — Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent

*1: For additional information, see “Engine oil” (P.8-12) for changing engine oil.

*2: INFINITI recommends Genuine NISSAN Ester Engine Oil available at your INFINITI retailer.

*3: For additional information, see “Engine oil and oil filter recommendation” (P.9-6).

*4: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatictransmission, which is not covered by the INFINITI new vehicle limited warranty.

*5 For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).

CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS

Page 370: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

*6: See an INFINITI retailer for service for synthetic oil.

*7: Using transfer fluid other than Genuine NISSAN Matic J ATF will cause deterioration in driveability and transfer durability, and may damage the transfer, which is not covered by the INFINITI newvehicle limited warranty.

*8: Available in mainland U.S.A through an INFINITI retailer.

*9: For additional information, see “Vehicle identification” (P.9-11) for air conditioner specification label.

Technical and consumer information 9-3

Page 371: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-4 Technical and consumer information

FUEL INFORMATIONUse unleaded premium gasoline with anoctane rating of at least 91 AKI (Anti-KnockIndex) number (Research octane number96).

If premium gasoline is not available,unleaded regular gasoline with an octanerating of 87 AKI number (Research octanenumber 91) may be temporarily used, butonly under the following precautions:

. Have the fuel tank filled only partiallywith unleaded regular gasoline, and fillup with unleaded premium gasoline assoon as possible.

. Avoid full throttle driving and abruptacceleration.

Use unleaded premium gasoline for max-imum vehicle performance.

CAUTION

. Using a fuel other than that specifiedcould adversely affect the emissioncontrol system, and may also affectwarranty coverage.

. Under no circumstances should a leadedgasoline be used, because this willdamage the three-way catalyst.

. Do not use E-15 or E-85 fuel in yourvehicle. Your vehicle is not designed torun on E-15 or E-85 fuel. Using E-15 or E-85 fuel in a vehicle not specificallydesigned for E-15 or E-85 fuel canadversely affect the emission controldevices and systems of the vehicle.Damage caused by such fuel is notcovered by the INFINITI new vehiclelimited warranty.

. U.S. government regulations requireethanol dispensing pumps to be identi-fied by a small, square, orange and blacklabel with the common abbreviation orthe appropriate percentage for thatregion.

Gasoline specificationsINFINITI recommends using gasoline thatmeets the World-Wide Fuel Charter (WWFC)specifications where it is available. Manyof the automobile manufacturers devel-oped this specification to improve emis-sion system and vehicle performance. Askyour service station manager if the gaso-line meets the World-Wide Fuel Charter(WWFC) specifications.

Reformulated gasolineSome fuel suppliers are now producingreformulated gasolines. These gasolinesare specially designed to reduce vehicleemissions. INFINITI supports efforts to-wards cleaner air and suggests that youuse reformulated gasoline when available.

Gasoline containing oxygenatesSome fuel suppliers sell gasoline contain-ing oxygenates such as ethanol, MTBE andmethanol with or without advertising theirpresence. INFINITI does not recommend theuse of fuels of which the oxygenate contentand the fuel compatibility for your INFINITIcannot be readily determined. If in doubt,ask your service station manager.

If you use oxygenate-blend gasoline,please take the following precautions asthe usage of such fuels may cause vehicleperformance problems and/or fuel systemdamage.

. The fuel should be unleaded and havean octane rating no lower than thatrecommended for unleaded gasoline.

. If an oxygenate-blend, excepting amethanol blend, is used, it shouldcontain no more than 10% oxygenate.(MTBE may, however, be added up to

Page 372: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

15%.). E-15 fuel contains more than 10%

oxygenate. E-15 fuel will adverselyaffect the emission control devicesand systems of the vehicle and shouldnot be used. Damage caused by suchfuel is not covered by the INFINITI NewVehicle Limited Warranty.

. If a methanol blend is used, it shouldcontain no more than 5% methanol(methyl alcohol, wood alcohol). Itshould also contain a suitable amountof appropriate cosolvents and corro-sion inhibitors. If not properly formu-lated with appropriate cosolvents andcorrosion inhibitors, such methanolblends may cause fuel system damageand/or vehicle performance problems.At this time, sufficient data is notavailable to ensure that all methanolblends are suitable for use in INFINITIvehicles.

If any undesirable driveability problemssuch as engine stalling or hard hot startingare experienced after using oxygenate-blend fuels, immediately change to anon-oxygenate fuel or a fuel with a lowblend of MTBE.

Take care not to spill gasoline duringrefueling. Gasoline containing oxygenatescan cause paint damage.

E-15 fuelE-15 fuel is a mixture of approximately15% fuel ethanol and 85% unleadedgasoline. E-15 can only be used in vehiclesdesigned to run on E-15 fuel. Do not use E-15 in your vehicle. U.S. governmentregulations require fuel ethanol dispensingpumps to be identified with small, square,orange and black label with the commonabbreviation or the appropriate percentagefor that region.

E-85 fuelE-85 fuel is a mixture of approximately85% fuel ethanol and 15% unleadedgasoline. E-85 can only be used in aFlexible Fuel Vehicle (FFV). Do not use E-85 fuel in your vehicle. U.S. governmentregulations require fuel ethanol dispensingpumps to be identified by a small, square,orange and black label with the commonabbreviation or the appropriate percentagefor that region.

Aftermarket fuel additivesINFINITI does not recommend the use ofany aftermarket fuel additives (Example:fuel injector cleaner, octane booster, intakevalve deposit removers, etc.) which aresold commercially. Many of these additivesintended for gum, varnish or depositremoval may contain active solvent orsimilar ingredients that can be harmful tothe fuel system and engine.

Octane rating tipsUsing unleaded gasoline with an octanerating lower than recommended above cancause persistent, heavy spark knock.(Spark knock is a metallic rapping noise.)If severe, this can lead to engine damage.If you detect a persistent heavy sparkknock even when using gasoline of thestated octane rating, or if you hear steadyspark knock while holding a steady speedon level roads, have an INFINITI retailercorrect the condition. Failure to correct thecondition is misuse of the vehicle, forwhich INFINITI is not responsible.

Incorrect ignition timing will result inknocking, after-run or overheating. This inturn may cause excessive fuel consumptionor damage to the engine. If any of the

Technical and consumer information 9-5

Page 373: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-6 Technical and consumer information

above symptoms are encountered, haveyour vehicle checked at an INFINITI retaileror other competent service facility.

However, now and then you may noticelight spark knock for a short time whileaccelerating or driving up hills. This is nocause for concern, because you get thegreatest fuel benefit when there is lightspark knock for a short time under heavyengine load.

JVT0159X

1. API certification mark2. API service symbol

ENGINE OIL AND OIL FILTER RE-COMMENDATION

Selecting the correct oilIt is essential to choose the correct grade,quality, and viscosity engine oil to ensuresatisfactory engine life and performance,see “Capacities and recommended fuel/lubricants” (P.9-2). INFINITI recommendsthe use of an energy conserving oil inorder to improve fuel economy.

Select only engine oils that meet the

American Petroleum Institute (API) certifi-cation or International Lubricant Standar-dization and Approval Committee (ILSAC)certification and SAE viscosity standard.These oils have the API certification markon the front of the container. Oils which donot have the specified quality label shouldnot be used as they could cause enginedamage.

Oil additivesINFINITI does not recommend the use of oiladditives. The use of an oil additive is notnecessary when the proper oil type is usedand maintenance intervals are followed.

Page 374: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Oil which may contain foreign matter orhas been previously used should not beused.

Oil viscosityThe engine oil viscosity or thicknesschanges with temperature. Because of this,it is important that the engine oil viscositybe selected based on the temperatures atwhich the vehicle will be operated beforethe next oil change. Choosing an oilviscosity other than that recommendedcould cause serious engine damage.

Selecting the correct oil filterYour new vehicle is equipped with a high-quality genuine NISSAN oil filter. Whenreplacing, use the genuine oil filter or itsequivalent for the reason described inchange intervals.

Change intervalsThe oil and oil filter change intervals foryour engine are based on the use of thespecified quality oils and filters. Oil andfilter other than the specified quality, or oiland filter change intervals longer thanrecommended could reduce engine life.Damage to engines caused by impropermaintenance or use of incorrect oil and

filter quality and/or viscosity is not coveredby the new INFINITI vehicle limited warran-ties.

Your engine was filled with a high qualityengine oil when it was built. You do nothave to change the oil before the firstrecommended change interval. Oil andfilter change intervals depend upon howyou use your vehicle. Operation under thefollowing conditions may require morefrequent oil and filter changes.

. repeated short distance driving at coldoutside temperatures,

. driving in dusty conditions,

. extensive idling,

. stop and go “rush hour” traffic,Refer to the “INFINITI Service and Main-tenance Guide” for the maintenance sche-dule.

AIR CONDITIONING SYSTEM RE-FRIGERANT AND LUBRICANT RE-COMMENDATIONSThe air conditioning system in yourINFINITI vehicle must be charged with therefrigerant HFC-134a (R-134a) and thelubricant, AE-10.

CAUTION

The use of any other refrigerant or lubricantwill cause severe damage to the air con-ditioning system and will require the repla-cement of all air conditioner systemcomponents.

The refrigerant HFC-134a (R-134a) in yourINFINITI vehicle will not harm the earth’sozone layer. Although this refrigerant doesnot affect the earth’s atmosphere, certaingovernmental regulations require the re-covery and recycling of any refrigerantduring automotive air conditioning systemservice. Your INFINITI retailer has thetrained technicians and equipment neededto recover and recycle your air conditioningsystem refrigerant.

Contact an INFINITI retailer when servicingyour air conditioning system.

Technical and consumer information 9-7

Page 375: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-8 Technical and consumer information

ENGINEModel VQ35HR

Type Gasoline, 4-cycle

Cylinder arrangement 6-cylinder, V-slanted at 608

Bore 6 Stroke in (mm)3.760 6 3.205(95.5 6 81.4)

Displacement cu in (cm3) 213.45 (3,498)

Firing order 1-2-3-4-5-6

Idle speed rpmNo adjustment is necessary.Ignition timing

(B.T.D.C.) degree/rpm

Spark plug FXE22HR11

Spark plug gap (Normal) in (mm) 0.043 (1.1)Camshaft operation Timing chain

This spark ignition system complies with the Canadian standard ICES-002.

STI0425

VQ35HR engine

SPECIFICATIONS

Page 376: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

WHEELS AND TIRES

Road wheelType Size Offset in (mm)

Conventional17 6 7.5J 1.77 (45)

196 8.5J 1.97 (50)

TireType Size Pressure PSI (kPa) [Cold]

Conventional

P225/55RF17 95V

35 (240)P245/40RF19 94V

245/40RF19 94W

Technical and consumer information 9-9

Page 377: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-10 Technical and consumer information

DIMENSIONSin (mm)

Grade Base/Premium Sport

Overall length (with front license plate) 188.6 (4,790) 189.1 (4,802)

Overall length (without front license plate) 188.3 (4,782) 189.1 (4,802)

Overall width 71.8 (1,823) 71.8 (1,823)

Overall height56.8 (1,442)*1*257.2 (1,453)*357.1 (1,451)*4

56.8 (1,442)*1*257.2 (1,453)*357.1 (1,451)*4

Front tread 60.8 (1,545)*1*360.4 (1,535)*2*4

60.8 (1,545)*1*360.4 (1,535)*2*4

Rear tread 61.8 (1,570)*1*361.4 (1,560)*2*4

61.8 (1,570)*1*361.4 (1,560)*2*4

Wheelbase 112.2 (2,850) 112.2 (2,850)

*1: Two-Wheel Drive (2WD)/17-in tire models*2: Two-Wheel Drive (2WD)/19-in tire models*3: All-Wheel Drive (AWD)/17-in tire models*4: All-Wheel Drive (AWD)/19-in tire models

Page 378: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

If you plan to travel in another country,you should first find out if the fuelavailable is suitable for your vehicle’sengine.

Using fuel with too low an octane ratingmay cause engine damage. All gasolinevehicles must be operated with unleadedgasoline. Therefore, avoid taking yourvehicle to areas where appropriate fuel isnot available.

When transferring the registration of yourvehicle to another country, state, provinceor district, it may be necessary to modifythe vehicle to meet local laws and regula-tions.

The laws and regulations for motor vehicleemission control and safety standards varyaccording to the country, state, province ordistrict; therefore, vehicle specificationsmay differ.

When any vehicle is to be taken intoanother country, state, province or districtand registered, its modifications, trans-portation, and registration are the respon-sibility of the user. INFINITI is notresponsible for any inconvenience thatmay result.

STI0716

VEHICLE IDENTIFICATION NUMBER(VIN) PLATEThe vehicle identification number plate isattached as shown. This number is theidentification for your vehicle and is usedin the vehicle registration.

STI0717

VEHICLE IDENTIFICATION NUMBER(chassis number)The number is stamped as shown in theengine compartment.

Technical and consumer information 9-11

WHEN TRAVELING OR REGISTERING YOURVEHICLE IN ANOTHER COUNTRY VEHICLE IDENTIFICATION

Page 379: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-12 Technical and consumer information

STI0509

ENGINE SERIAL NUMBERThe number is stamped on the engine asshown.

STI0718

F.M.V.S.S./C.M.V.S.S. CERTIFICA-TION LABELThe Federal/Canadian Motor Vehicle SafetyStandards (F.M.V.S.S./C.M.V.S.S.) certifica-tion label is affixed as shown. This labelcontains valuable vehicle information, suchas: Gross Vehicle Weight Ratings (GVWR),Gross Axle Weight Rating (GAWR), monthand year of manufacture, Vehicle Identifi-cation Number (VIN), etc. Review it care-fully.

STI0719

EMISSION CONTROL INFORMATIONLABELThe emission control information label isattached as shown.

Page 380: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

JVT0220X

TIRE AND LOADING INFORMATIONLABELThe cold tire pressure is shown on the Tireand Loading Information label affixed tothe pillar as illustrated.

STI0721

AIR CONDITIONER SPECIFICATIONLABELThe air conditioner specification label isattached as shown.

Technical and consumer information 9-13

Page 381: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-14 Technical and consumer information

JVT0222X

Use the following steps to mount thelicense plate:

Before mounting the license plate, confirmthat the following parts are enclosed in theplastic bag.

Only use the recommended mountingposition, otherwise the radar sensor (In-telligent Cruise Control (ICC) system) (if soequipped) obstruction may result.

. License plate bracket

. J-nut 6 2

. Screw 6 2

. Screw grommet 6 21. Park the vehicle on flat, level ground.

2. Locate the center position *A asillustrated. Position the license platebracket at a distance of approximately1.26 in (32 mm) *B from the bottom ofthe bumper. Hold the license platebracket in place.

3. Mark the center of the hole *C with afelt-tip pen.

4. Carefully drill two pilot holes using a0.35 in (9 mm) drill bit at the markedlocations. (Be sure that the drill onlygoes through the bumper fascia.)

INSTALLING FRONT LICENSE PLATE

Page 382: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

5. Insert grommets into the hole on thefascia.

6. Insert a flat-blade screwdriver into thegrommet hole to add 908 turn onto thepart *D .

7. Install the license plate bracket withscrews.

STI0623

Left sideThis vehicle is equipped with air deflectorsin front of the front wheels. The deflectorswill change the air flow to help improveaerodynamic performance.

When transporting your vehicle on a trailer,the air deflectors may interfere with asteep slope to a trailer bed. In this case,remove the deflectors from the undercoverof the vehicle.

1. Loosen three screws as shown andremove the left-side air deflector *A .

2. Tighten the removed screw *B in itsoriginal position.

3. Perform the same procedure to removethe right-side air deflector.

4. Store the two air deflectors and fourscrews to reinstall in the reverse order.

5. When reinstalling, make sure all sixscrews are firmly tightened on both airdeflectors.

Technical and consumer information 9-15

REMOVING AIR DEFLECTORS

Page 383: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-16 Technical and consumer information

WARNING

. It is extremely dangerous to ridein a cargo area inside the vehicle.In a collision, people riding inthese areas are more likely to beseriously injured or killed.

. Do not allow people to ride in anyarea of vehicle that is notequipped with seats and seatbelts.

. Be sure everyone in your vehicle isin a seat and using a seat beltproperly.

TERMSIt is important to familiarize yourselfwith the following terms beforeloading your vehicle:. Curb Weight (actual weight of your

vehicle) - vehicle weight includ-ing: standard and optional equip-ment, fluids, emergency tools,and spare tire assembly. This

weight does not include passen-gers and cargo.

. GVW (Gross Vehicle Weight) - curbweight plus the combined weightof passengers and cargo.

. GVWR (Gross Vehicle Weight Rat-ing) - maximum total combinedweight of the unloaded vehicle,passengers, luggage, hitch, trailertongue load and any other op-tional equipment. This informa-tion is located on the F.M.V.S.S./C.M.V.S.S. label.

. GAWR (Gross Axle Weight Rating) -maximum weight (load) limit spe-cified for the front or rear axle.This information is located on theF.M.V.S.S./C.M.V.S.S. label.

. GCWR (Gross Combined WeightRating) - The maximum totalweight rating of the vehicle, pas-sengers, cargo, and trailer.

. Vehicle Capacity Weight, Loadlimit, Total load capacity - max-imum total weight limit specified

of the load (passengers and car-go) for the vehicle. This is themaximum combined weight ofoccupants and cargo that can beloaded into the vehicle. If thevehicle is used to tow a trailer,the trailer tongue weight must beincluded as part of the cargo load.This information is located on theTire and Loading Information la-bel.

. Cargo capacity - permissibleweight of cargo, the weight oftotal occupants weight subtractedfrom the load limit.

VEHICLE LOADING INFORMATION

Page 384: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

STI0365

VEHICLE LOAD CAPACITYDo not exceed the load limit of yourvehicle shown as “The combinedweight of occupants and cargo” onthe Tire and Loading Informationlabel. Do not exceed the number ofoccupants shown as “Seating Capa-city” on the Tire and Loading In-formation label.

To get “the combined weight ofoccupants and cargo”, add theweight of all occupants, then add

the total luggage weight. Examplesare shown in the illustration.

Steps for determining correct loadlimit1. Locate the statement “The com-

bined weight of occupants andcargo should never exceed XXX kgor XXX lbs” on your vehicle’splacard.

2. Determine the combined weight ofthe driver and passengers thatwill be riding in your vehicle.

3. Subtract the combined weight ofthe driver and passengers fromXXX kg or XXX lbs.

4. The resulting figure equals theavailable amount of cargo andluggage load capacity. For exam-ple, if the XXX amount equals1400 lbs. and there will be five150 lb. passengers in your vehi-cle, the amount of available cargoand luggage load capacity is 650lbs. (1400 − 750 (5 x 150) = 650lbs or 640 − 340 (5 x 70) = 300kg.)

5. Determine the combined weight ofluggage and cargo being loadedon the vehicle. That weight maynot safely exceed the availablecargo and luggage load capacitycalculated in Step 4.

6. If your vehicle will be towing atrailer, load from your trailer willbe transferred to your vehicle.Consult this manual to determinehow this reduces the available

Technical and consumer information 9-17

Page 385: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-18 Technical and consumer information

cargo and luggage load capacityof your vehicle.

Before driving a loaded vehicle,confirm that you do not exceed theGross Vehicle Weight Rating (GVWR)or the Gross Axle Weight Rating(GAWR) for your vehicle. (See “Mea-surement of weights” (P.9-18).)

Also check tires for proper inflationpressures. See the Tire and LoadingInformation label.

LOADING TIPS. The GVW must not exceed GVWR

or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label.

. Do not load the front and rear axleto the GAWR. Doing so will exceedthe GVWR.

WARNING

. Properly secure all cargo to helpprevent it from sliding or shifting.Do not place cargo higher than the

seatbacks. In a sudden stop orcollision, unsecured cargo couldcause personal injury.

. Do not load your vehicle anyheavier than the GVWR or themaximum front and rear GAWRs.If you do, parts of your vehicle canbreak, tire damage could occur, orit can change the way your vehiclehandles. This could result in lossof control and cause personalinjury.

. Overloading could not only short-en the life of your vehicle and thetires, but also could lead tohazardous vehicle handling andlong braking distance. This maycause a premature tire malfunc-tion, which could result in aserious accident and personal in-jury. Failures caused by overload-ing are not covered by thevehicle’s warranty.

MEASUREMENT OF WEIGHTSSecure loose items to prevent weightshifts that could affect the balance ofyour vehicle. When the vehicle isloaded, drive to a scale and weighthe front and the rear wheels sepa-rately to determine axle loads. In-dividual axle loads should notexceed either of the gross axleweight ratings (GAWR). The total ofthe axle loads should not exceed thegross vehicle weight rating (GVWR).These ratings are given on thevehicle certification label. If weightratings are exceeded, move or re-move items to bring all weightsbelow the ratings.

Page 386: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Do not tow a trailer with yourvehicle.

FLAT TOWINGTowing your vehicle with all four wheels onthe ground is sometimes called flat towing.This method is sometimes used whentowing a vehicle behind a recreationalvehicle, such as a motor home.

CAUTION

. Failure to follow these guidelines canresult in severe transmission damage.

. Whenever flat towing your vehicle, al-ways tow forward, never backward.

. DO NOT tow any Automatic Transmission(AT) vehicle with all four wheels on theground (flat towing). Doing so WILLDAMAGE internal transmission partsdue to lack of transmission lubrication.

. DO NOT tow any All-Wheel Drive (AWD)vehicle with any of the wheels on theground. Doing so may cause serious andexpensive damage to the powertrain.

. For emergency towing procedures referto “Towing recommended by INFINITI”(P.6-9).

Automatic Transmission (AT)All-Wheel Drive (AWD) models:

Do not tow an AWD vehicle with any of thewheels on the ground.

Two-Wheel Drive (2WD) models:

To tow a vehicle equipped with an auto-matic transmission, an appropriate vehicledolly MUST be placed under the towedvehicle’s drive wheels. Always follow thedolly manufacturer’s recommendationswhen using their product.

DOT (Department Of Transportation) Qual-ity Grades: All passenger car tires mustconform to federal safety requirements inaddition to these grades.

Quality grades can be found where applic-able on the tire sidewall between treadshoulder and maximum section width. Forexample:

Treadwear 200 Traction AA Temperature A

TREADWEARThe treadwear grade is a comparativerating based on the wear rate of the tirewhen tested under controlled conditionson a specified government test course. Forexample, a tire graded 150 would wear oneand one-half (1 1/2) times as well on thegovernment course as a tire graded 100.The relative performance of tires dependsupon actual conditions of their use, how-ever, and may depart significantly from thenorm due to variations in driving habits,service practices and differences in roadcharacteristics and climate.

Technical and consumer information 9-19

TOWING A TRAILER UNIFORM TIRE QUALITY GRADING

Page 387: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-20 Technical and consumer information

TRACTION AA, A, B AND CThe traction grades, from highest to low-est, are AA, A, B and C. Those gradesrepresent the tire’s ability to stop on wetpavement as measured under controlledconditions on specified government testsurfaces of asphalt and concrete. A tiremarked C may have poor traction perfor-mance.

WARNING

The traction grade assigned to this tire isbased on straight-ahead braking tractiontests, and does not include acceleration,cornering, hydroplaning, or peak tractioncharacteristics.

TEMPERATURE A, B AND CThe temperature grades A (the highest), B,and C, representing the tire’s resistance tothe generation of heat and its ability todissipate heat when tested under con-trolled conditions on a specified indoorlaboratory test wheel. Sustained hightemperature can cause the material of thetire to degenerate and reduce tire life, andexcessive temperature can lead to sudden

tire failure. The grade C corresponds to alevel of performance which all passengercar tires must meet under the FederalMotor Vehicle Safety Standard No. 109.Grades B and A represent higher levels ofperformance on the laboratory test wheelthan the minimum required by law.

WARNING

The temperature grade for this tire isestablished for a tire that is properlyinflated and not overloaded. Excessivespeed, under-inflation, or excessive loading,either separately or in combination, cancause heat build-up and possible tire failure.

Your INFINITI is covered by the followingemission warranties.

For USA:

. Emission Defects Warranty

. Emissions Performance WarrantyDetails of these warranties may be foundwith other vehicle warranties in yourWarranty Information Booklet that comeswith your INFINITI. If you did not receive aWarranty Information Booklet, or it hasbecome lost, you may obtain a replace-ment by writing to:

. INFINITI DivisionNissan North America, Inc.Consumer Affairs DepartmentP.O. Box 685003Franklin, TN 37068-5003

For Canada:

Emission Control System Warranty

Details of these warranties may be foundwith other vehicle warranties in yourWarranty and Roadside Assistance Infor-mation that comes with your INFINITI. If youdid not receive a Warranty and RoadsideAssistance Information, or it has becomelost, you may obtain a replacement bywriting to:

EMISSION CONTROL SYSTEM WARRANTY

Page 388: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

. Nissan Canada Inc.5290 Orbitor DriveMississauga, Ontario,L4W 4Z5

For USA

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform the Na-tional Highway Traffic Safety Admin-istration (NHTSA) in addition tonotifying INFINITI.

If NHTSA receives similar complaints,it may open an investigation, and if itfinds that a safety defect exists in agroup of vehicles, it may order arecall and remedy campaign. How-ever, NHTSA cannot become involvedin individual problems between you,your retailer, or INFINITI.

To contact NHTSA, you may call theVehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator,NHTSA, 400 Seventh Street, SW.,Washington DC 20590. You can alsoobtain other information about motorvehicle safety from http://www.safe-

rcar. gov.

You may notify INFINITI by contactingour Consumer Affairs Department,toll-free, at 1-800-662-6200.

For Canada

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform TransportCanada in addition to notifyingINFINITI.

If Transport Canada receives com-plaints, it may open an investigation,and if it finds that a safety defectexists in a group of vehicles, it mayrequest that INFINITI conduct a recallcampaign. However, Transport Cana-da cannot become involved in indivi-dual problems between you, yourretailer, or INFINITI.

You may contact Transport Canada’sDefect Investigations and RecallsDivision toll free at 1-800-333-0510.You may also report safety defects

Technical and consumer information 9-21

REPORTING SAFETY DEFECTS

Page 389: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-22 Technical and consumer information

online at:

https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/PCDB-BDPP/Index.aspx.

Additional information concerningmotor vehicle safety may be obtainedfrom Transport Canada’s Road SafetyInformation Centre at 1-800- 333-0371 or online at www.tc.gc.ca/roadsafety (English speakers) orwww.tc .gc .ca/secur i terout iere(French speakers).

To notify INFINITI of any safety con-cerns please contact our ConsumerInformation Centre toll free at 1-800-361-4792.

WARNING

A vehicle equipped with Intelligent All-Wheel Drive (AWD) should never be testedusing a two wheel dynamometer (such asthe dynamometers used by some states foremissions testing), or similar equipment.Make sure you inform test facility personnelthat your vehicle is equipped with AWDbefore it is placed on a dynamometer. Usingthe wrong test equipment may result intransmission damage or unexpected vehiclemovement which could result in seriousvehicle damage or personal injury.

Due to legal requirements in some states/areas, your vehicle may be required to bein what is called the “ready condition” foran Inspection/Maintenance (I/M) test ofthe emission control system.

The vehicle is set to the “ready condition”when it is driven through certain drivingpatterns. Usually, the “ready condition”can be obtained by ordinary usage of thevehicle.

If a powertrain system component isrepaired or the 12-volt battery is discon-nected, the vehicle may be reset to a “not

ready condition”. Before taking the I/Mtest, check the vehicle’s inspection/main-tenance test readiness condition. Place theignition switch in the ON position withoutstarting the engine. If the MalfunctionIndicator Light (MIL) comes on steady for20 seconds and then blinks for 10seconds, the I/M test condition is “notready”. If the MIL does not blink after 20seconds, the I/M test condition is “ready”.

Contact an INFINITI retailer to set the“ready condition” or to prepare the vehiclefor testing.

READINESS FOR INSPECTION/MAINTENANCE (I/M) TEST (US only)

Page 390: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

This vehicle is equipped with an Event DataRecorder (EDR). The main purpose of anEDR is to record, in certain crash or nearcrash-like situations, such as an air bagdeployment or hitting a road obstacle, datathat will assist in understanding how avehicle’s systems performed. The EDR isdesigned to record data related to vehicledynamics and safety systems for a shortperiod of time, typically 30 seconds orless. The EDR in this vehicle is designed torecord such data as:

. How various systems in your vehiclewere operating;

. Whether or not the driver and passen-ger safety belts were buckled/fastened;

. How far (if at all) the driver wasdepressing the accelerator and/orbrake pedal; and,

. How fast the vehicle was traveling.

. Sounds are not recorded.These data can help provide a betterunderstanding of the circumstances inwhich crashes and injuries occur.

NOTE: EDR data are recorded by yourvehicle only if a nontrivial crash situationoccurs; no data are recorded by the EDRunder normal driving conditions and nopersonal data (e.g. name, gender, age and

crash location) are recorded. However,other parties, such as law enforcement,could combine the EDR data with the typeof personally identifying data routinelyacquired during a crash investigation.

To read data recorded by an EDR, specialequipment is required and access to thevehicle or the EDR is needed. In addition tothe vehicle manufacturer and INFINITIretailer, other parties, such as law enforce-ment, that have the special equipment, canread the information if they have access tothe vehicle or the EDR. EDR data will onlybe accessed with the consent of the vehicleowner or lessee or as otherwise required orpermitted by law.

Genuine INFINITI Service Manual for thismodel year and prior can be purchased. Agenuine INFINITI Service Manual is the bestsource of service and repair information foryour vehicle. This manual is the same oneused by the factory-trained techniciansworking at INFINITI retailerships. GenuineINFINITI Owner’s Manuals can also bepurchased.

For USA:

For current pricing and availability ofgenuine INFINITI Service Manuals, contact:

1-800-450-9491www.infiniti-techinfo.com

For current pricing and availability ofgenuine INFINITI Owner’s Manuals, con-tact:

1-800-247-5321

For Canada:

To purchase a copy of a genuine INFINITIService Manual or Owner’s Manual for thismodel year and prior, contact an INFINITIretailer. For the phone number and locationof an INFINITI retailer in your area call theINFINITI Satisfaction Center at 1-800-361-4792 and a bilingual INFINITI representa-tive will assist you.

Technical and consumer information 9-23

EVENT DATA RECORDERS (EDR) OWNER’S MANUAL/SERVICE MANUALORDER INFORMATION

Page 391: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

9-24 Technical and consumer information

MEMO

Page 392: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

10 Index

Number

12-volt battery charge warning light ................. 2-12

A

ABS (Anti-lock Braking System) ....................... 5-107Acceleration guide ............................................ 2-31Active Lane Control ........................................... 5-24Active noise control ........................................ 5-115Active sound control ....................................... 5-115Active trace control ......................................... 5-110Air bag system

Front-seat mounted side-impactsupplemental air bag system ....................... 1-47Roof-mounted curtain side-impactsupplemental air bag system ....................... 1-47

Air bag warning labels ...................................... 1-50Air bag warning light ............................... 1-50, 2-17Air cleaner housing filter................................... 8-20Air conditioner

Air conditioner specification label ................ 9-13Air conditioning system refrigerant andlubricant recommendations ............................ 9-7

Air deflectors .................................................... 9-15Air vent............................................................... 7-6Alarm

How to stop alarm (see vehiclesecurity system)........................................... 2-36

Alcohol, drugs and driving .................................. 5-9Antenna .............................................................. 4-3

Anti-lock Braking System (ABS) ....................... 5-107Appearance care

Exterior appearance care................................ 7-2Interior appearance care ................................ 7-5

Approaching Vehicle Sound for Pedestrians(VSP) system .................................. Hybrid System-8Armrest............................................................... 1-5Ashtray ............................................................. 2-49Assist charge gauge................. Hybrid System-5, 2-8Audible reminders ............................................ 2-20Audio................................................................ 2-34Autolight system............................................... 2-41Automatic

Automatic transmission fluid (ATF) ............... 8-15Driving with automatic transmission ............ 5-14

Automatic door locks .......................................... 3-5Automatic drive positioner ................................ 3-28Automatic moonroof.......................................... 2-56Automatic seat positioner ................................. 3-28Average speed .................................................. 2-33Avoiding collision and rollover ............................ 5-8

B

Back-up Collision Intervention (BCI) system....... 5-48Battery.............................................................. 8-17

Battery replacement, Intelligent Key ............... 3-2Battery saver system ................................... 2-45Intelligent Key.............................................. 8-25

Before starting the INFINITI Direct ResponseHybrid® System ................................................ 5-13Blind Spot Warning (BSW) system/Blind SpotInterventionTM (BSI) system............................... 5-37Brake

Anti-lock Braking System (ABS) .................. 5-107Brake fluid ................................................... 8-15Brake force distribution ............................. 5-109Brake system ............................................. 5-106Brake system warning light (yellow) ............. 2-13Brake warning light (red) ............................. 2-13Parking brake operation............................... 5-20Rise-up and build-up ................................. 5-109

Break-in schedule ............................................. 5-99Bulb check/instrument panel ............................ 2-12Bulb replacement.............................................. 8-27

C

Capacities and recommended fuel/lubricants ...... 9-2Car phone or CB radio ........................................ 4-3Card holder....................................................... 2-52Catalytic converter

Three-way catalyst ......................................... 5-4Changing inverter coolant ................................. 8-12Chassis control ............................................... 5-112Chassis control warning .................................... 2-27Checking battery fluid level............................... 8-18Checking inverter coolant level ......................... 8-12Child restraints ................................................. 1-19

Page 393: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

10-2

LATCH system .............................................. 1-21Precautions on child restraints..................... 1-19

Child safety ...................................................... 1-17Child safety rear door lock .................................. 3-6Chimes

Audible reminders ....................................... 2-20Seat belt warning light and chime ............... 2-17

Circuit breakerFusible link .................................................. 8-23

Cleaning exterior and interior....................... 7-2, 7-5Clock ................................................................ 2-34Coat hooks ....................................................... 2-53Cockpit ............................................................... 2-3Cold weather driving ....................................... 5-113Compass............................................................. 2-9Console box...................................................... 2-52Coolant

Capacities and recommendedfuel/ lubricants .............................................. 9-2Changing engine coolant ............................. 8-10Checking engine coolant level ...................... 8-10

Corrosion protection ........................................... 7-8Courtesy light ................................................... 2-61Cruise control ................................................... 5-56

Fixed speed cruise control (on ICC system) ... 5-74Intelligent Cruise Control (ICC) system.......... 5-58

Cruise indicator ................................................ 2-27Cup holders ...................................................... 2-49Current fuel consumption.................................. 2-33

D

Daytime running light system ........................... 2-45Defroster switch

Rear window and outside mirrordefroster switch ........................................... 2-41

Dimensions....................................................... 9-10Direct adaptive steering .................................. 5-104Direct Response Hybrid® System warning light(hybrid system warning light)............................ 2-14Distance Control Assist (DCA) system ................ 5-79Distance to empty............................................. 2-33Drive positioner ................................................ 3-28Driver assist system indicator ........................... 2-28Driving

Cold weather driving .................................. 5-113Driving with automatic transmission ............ 5-14Precautions when starting and driving ........... 5-3

Driving aids ...................................................... 2-34

E

ECO drive indicator light ................................... 2-18ECO mode......................................................... 5-21ECO pedal system ............................................. 5-22Economy

Fuel ........................................................... 5-100Efficient use of your vehicle ............ Hybrid System-8Elapsed time..................................................... 2-33Elapsed time and trip odometer ........................ 2-33Emergency shut-off system ............. Hybrid System-4Emission control information label .................... 9-12

Emission control system warranty ..................... 9-20Energy flow..................................... Hybrid System-5Energy monitor ................................................. 2-31Energy monitors.............................. Hybrid System-5Engine

Break-in schedule ........................................ 5-99Capacities andrecommended fuel/lubricants ........................ 9-2Changing engine coolant ............................. 8-10Changing engine oil and filter ...................... 8-13Checking engine coolant level ...................... 8-10Checking engine oil level ............................. 8-12Emergency hybrid system shut off ............... 5-12Engine block heater ................................... 5-114Engine compartment check locations ............. 8-7Engine cooling system ................................... 8-9Engine oil .................................................... 8-12Engine oil and filter replacement indicator ... 2-29Engine oil and oil filter recommendation ........ 9-6Engine oil viscosity ........................................ 9-7Engine serial number ................................... 9-12Engine specifications ..................................... 9-8If your vehicle overheats ................................ 6-7

Engine coolant temperature gauge .................... 2-33Entry/exit function

Automatic drive positioner ........................... 3-28EV mode odometer and twin trip odometer ....... 2-31Event Data Recorders (EDR) ............................... 9-23Exhaust gas (carbon monoxide) .......................... 5-3

Page 394: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

F

F.M.V.S.S./C.M.V.S.S. certification label ............. 9-12Filter

Air cleaner housing filter.............................. 8-20Changing engine oil and filter ...................... 8-13

Flashers (See hazard warning flasher switch) ...... 6-2Flat tire ............................................................... 6-3Flat Tire - Visit dealer warning .......................... 2-26Flat towing........................................................ 9-19Floor mat cleaning .............................................. 7-7Floor mat positioning aid .................................... 7-7Fluid

Automatic transmission fluid (ATF) ............... 8-15Brake fluid ................................................... 8-15Capacities andrecommended fuel/lubricants ........................ 9-2Engine coolant ............................................... 8-9Engine oil .................................................... 8-12Window washer fluid ................................... 8-16

Fog light switch ................................................ 2-47Forward emergency braking system .................. 5-89Forward emergency braking systemwarning light .................................................... 2-15Front passenger air bag and status light ........... 1-44Front power seat adjustment............................... 1-3Front seat

Front seat adjustment .................................... 1-3Fuel

Capacities andrecommended fuel/lubricants ........................ 9-2

Fuel economy............................................. 5-100Fuel octane rating .......................................... 9-4Fuel recommendation..................................... 9-4Fuel-filler cap ............................................... 3-21Fuel-filler door ............................................. 3-21Gauge............................................................ 2-8

Fuel economy history ...................... Hybrid System-6Fuel Efficient Driving Tips .................................. 5-99Fuses ................................................................ 8-23Fusible links ..................................................... 8-23

G

Garage door openerHomeLink® Universal Transceiver ................. 2-61

Gas cap ............................................................ 3-21Gauge................................................................. 2-6

Engine coolant temperature gauge ............... 2-33Fuel gauge ..................................................... 2-8Odometer....................................................... 2-7Speedometer ................................................. 2-7Tachometer .................................................... 2-8Trip computer .............................................. 2-31

General maintenance .......................................... 8-2Glove box ......................................................... 2-51

H

Hazard warning flasher switch ............................ 6-2Head restraints/headrests................................... 1-5

HeadlightsAiming control (See Adaptive Front lightingSystem (AFS)) .............................................. 2-45Headlight switch .......................................... 2-41

Heated seats ...................................................... 1-5Heater

Engine block heater ................................... 5-114High beam assist .............................................. 2-43High temperature warning................................. 2-26High voltage cautions ..................... Hybrid System-2High voltage components................ Hybrid System-9Hill start assist system ................................... 5-112HomeLink® Universal Transceiver ...................... 2-61Hood release .................................................... 3-18Hook

Coat hooks .................................................. 2-53Trunk hooks................................................. 2-53

Horn ................................................................. 2-47Hybrid system over heat warning ...................... 2-26Hybrid system start operation indicator ............ 2-24Hybrid vehicle characteristics ........ Hybrid System-10Hybrid vehicle precautions .............. Hybrid System-9

I

If the vehicle does not start ................................ 6-5Ignition switch

(Push-button) ............................................... 5-10Automatic transmission models ................... 5-14

Immobilizer system........................................... 2-37Indicator

Vehicle information display .......................... 2-21

10-3

Page 395: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

10-4

Indicator lights ................................................. 2-18INFINITI Direct ResponseHybrid® System .............................. Hybrid System-2

Before starting the INFINITI Direct ResponseHybrid® System ........................................... 5-13Starting the INFINITI Direct ResponseHybrid® System ........................................... 5-14

INFINITI Drive Mode Selector ............................. 5-21Infiniti InTouch Owner’s Manual .......................... 4-2INFINITI Vehicle Immobilizer System .................. 2-37

Engine start ................................................. 2-37Inside mirror ..................................................... 3-25Inspection/maintenance (I/M) test .................... 9-22Instrument brightness control ........................... 2-46Instrument panel ................................................ 2-5Intelligent All-Wheel Drive (AWD)..................... 5-101Intelligent Cruise Control (ICC) system............... 5-58Intelligent Cruise Control (ICC) systemON indicator ..................................................... 2-28Intelligent Key..................................................... 3-2Intelligent Key system......................................... 3-6

Battery replacement..................................... 8-25Key operating range....................................... 3-8Key operation ................................................ 3-9Warning signals ........................................... 3-12

Interior light control switch ............................... 2-59Interior light replacement.................................. 8-28Interior lights .................................................... 2-58Interior trunk lid release ................................... 3-21Inverter cooling system ..................................... 8-11ISOFIX child restraint ........................................ 1-21

J

Jump starting ...................................................... 6-5

K

Keyless entry (See remote keylessentry system) .................................................... 3-14Keys ................................................................... 3-2

For Intelligent Key system .............................. 3-6

L

LabelsAir bag warning labels ................................. 1-50Air conditioner specification label ................ 9-13Emission control information label ............... 9-12Engine serial number ................................... 9-12F.M.V.S.S./C.M.V.S.S. certification label ........ 9-12Tire and Loading information label...... 8-31, 9-13Vehicle identification number (VIN) .............. 9-11

Lane Departure Prevention (LDP) system ........... 5-33Lane Departure Warning (LDW) system.............. 5-31Lane Departure Warning (LDW) system/LaneDeparture Prevention (LDP) system ................... 5-30LATCH system ................................................... 1-21License plate

Installing front license plate......................... 9-14Light

Air bag warning light ................................... 1-50Bulb replacement......................................... 8-27

Fog light switch ........................................... 2-47Headlight switch .......................................... 2-41Indicator lights ............................................ 2-18Interior light control switch .......................... 2-59Interior lights ............................................... 2-58Map lights ................................................... 2-58Personal lights............................................. 2-59Replacement ................................................ 8-27Trunk light ................................................... 2-60Vanity mirror lights ...................................... 2-60Warning/indicator lights andaudible reminders........................................ 2-12

LightsExterior and interior light replacement ......... 8-28

Lithium-ion (Li-ion) battery .............. Hybrid System-2Loading information (See vehicleloading information) ......................................... 9-16Lock

Automatic door locks ..................................... 3-5Door locks ..................................................... 3-4Power door lock............................................. 3-4Trunk lid ...................................................... 3-19

Locking with mechanical key............................... 3-4Log-in function.................................................. 3-14Loose Fuel Cap warning ........................... 2-25, 3-23Low fuel warning light ...................................... 2-15Low outside temperature warning ..................... 2-27Low tire pressure warning light ......................... 2-15Low tire pressure warning system (See Tire PressureMonitoring System (TPMS)) ................. 5-4, 6-3, 8-30

Page 396: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

M

MaintenanceBattery......................................................... 8-17General maintenance ..................................... 8-2Indicators for maintenance (vehicleinformation display) ..................................... 2-29Inside the vehicle .......................................... 8-3Maintenance precautions ............................... 8-5Maintenance requirements ............................. 8-2Outside the vehicle ........................................ 8-2Seat belt maintenance ................................. 1-16Under the hood and vehicle ........................... 8-4

Malfunction Indicator Light (MIL) ....................... 2-19Map lights ........................................................ 2-58Master warning light ......................................... 2-17Mechanical key (Intelligent Key system) .............. 3-3Memory storage

Automatic drive positioner ........................... 3-29Meter

Trip computer .............................................. 2-31Meters and gauges ............................................. 2-6

Instrument brightness control ...................... 2-46Mirror

Inside mirror ................................................ 3-25Outside mirrors............................................ 3-26Vanity mirror................................................ 3-28

Moonroof .......................................................... 2-56

N

NAVI Shift Control ............................................. 5-19New vehicle break-in......................................... 5-99Noise and vibration ...................... Hybrid System-12

O

Odometer............................................................ 2-7Off-road recovery ................................................ 5-8Oil

Capacities andrecommended fuel/lubricants ........................ 9-2Changing engine oil and filter ...................... 8-13Checking engine oil level ............................. 8-12Engine oil .................................................... 8-12Engine oil viscosity ........................................ 9-7

One touch unlock sensor (See IntelligentKey system) ........................................................ 3-9Operation

Indicators for operation ............................... 2-24Operation of the INFINITI Direct ResponseHybrid® System .............................. Hybrid System-4Outside mirrors................................................. 3-26Overheat, If your vehicle overheats ..................... 6-7Owner’s Manual/Service Manualorder information.............................................. 9-23

P

Panic alarm ...................................................... 3-16

ParkingParking brake operation............................... 5-20Parking on hills ......................................... 5-103

Parking brake break-in .................................... 5-106Personal lights.................................................. 2-59PERSONAL mode ............................................... 5-23Phone

Car phone or CB radio ................................... 4-3Power

Power door lock............................................. 3-4Power outlet ................................................ 2-48Power steering system ............................... 5-104Power windows............................................ 2-54

Power steering warning light............................. 2-17Precautions

Braking precautions ................................... 5-106Child restraints ............................................ 1-19Cruise control .............................................. 5-56Maintenance .................................................. 8-5Seat belt usage ........................................... 1-10Supplemental restraint system..................... 1-37When starting and driving.............................. 5-3

Pre-crash seat belts with comfort function ........ 1-12Predictive forward collision warning system ...... 5-94Push starting ...................................................... 6-7Push-button ignition switch ..................... 5-10, 5-11

R

RadioCar phone or CB radio ................................... 4-3

Rain-sensing auto wiper system........................ 2-40

10-5

Page 397: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

10-6

Rapid air pressure loss ....................................... 5-8Readiness for inspection/maintenance (I/M) test(US only) .......................................................... 9-22Rear door lock

Child safety rear door lock ............................. 3-6Rear window and outside mirrordefroster switch ................................................ 2-41Recorders

Event data ................................................... 9-23Regenerative brake ......................... Hybrid System-8Registering your vehicle in another country ...... 9-11Remote keyless entry system ............................ 3-14Reporting safety defects ................................... 9-21Request switch (See Intelligent Key system)........ 3-9Road accident cautions ................... Hybrid System-3Roadside assistance program ............................. 6-2Rollover .............................................................. 5-8Roof

Moonroof ..................................................... 2-57Run-flat tires ....................................................... 6-4

S

SafetyChild seat belts ........................................... 1-17Reporting safety defects .............................. 9-21

Seat adjustmentFront power seat adjustment.......................... 1-3Front seats..................................................... 1-3

Seat belt(s)Child safety ................................................. 1-17Infants ......................................................... 1-18

Injured persons ........................................... 1-12Larger children............................................. 1-18Precautions on seat belt usage .................... 1-10Pre-crash seat belts with comfort function ... 1-12Pregnant women .......................................... 1-12Seat belt cleaning .......................................... 7-7Seat belt extenders...................................... 1-16Seat belt maintenance ................................. 1-16Seat belt warning light and chime ............... 2-17Seat belts .................................................... 1-10Seat belts with pretensioners ...................... 1-49Shoulder belt height adjustment .................. 1-16Small children ............................................. 1-18Three-point type .......................................... 1-13

Seat(s)Driver-side memory...................................... 3-28Heated seats ................................................. 1-5Seats ............................................................. 1-2

Security systemVehicle security system................................ 2-35

Security system (INFINITI Vehicle ImmobilizerSystem)

Engine start ................................................. 2-37Shift lever

Shift lock release ......................................... 5-18Shift lock release, Transmission ........................ 5-18SHIFT “P” warning ............................................ 2-24Shifting

Automatic transmission ............................... 5-14Shoulder belt height adjustment ....................... 1-16SNOW mode ..................................................... 5-21

Spark plugs ...................................................... 8-19Speedometer ...................................................... 2-7SPORT mode ..................................................... 5-21STANDARD mode............................................... 5-21Starting

Before starting the INFINITI Direct ResponseHybrid® System ........................................... 5-13Jump starting ............................................... 8-18Precautions when starting and driving ........... 5-3Push starting ................................................. 6-7Starting the INFINITI Direct ResponseHybrid® System ........................................... 5-14

Status light, Front passenger air bag ................ 1-44Steering

Direct adaptive steering ............................. 5-104Power steering system ............................... 5-104Tilt/telescopic steering................................. 3-24

Storage............................................................. 2-49Storage box ...................................................... 2-52Sun visors ........................................................ 3-25Sunglasses holder ............................................ 2-51Supplemental air bag warning labels ................ 1-50Supplemental air bag warning light ......... 1-50, 2-17Supplemental restraint system.......................... 1-37

Precautions on supplementalrestraint system........................................... 1-37

SwitchAutolight switch ........................................... 2-41Fog light switch ........................................... 2-47Hazard warning flasher switch ....................... 6-2Headlight switch .......................................... 2-41

Page 398: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

Ignition switch ............................................. 5-14Power door lock switch .................................. 3-5Rear window and outside mirrordefroster switch ........................................... 2-41Turn signal switch........................................ 2-47Vehicle Dynamic Control (VDC) off switch ..... 2-48

T

Tachometer ......................................................... 2-8Temperature

Engine coolant temperature gauge ............... 2-33Theft (INFINITI Vehicle Immobilizer System)

Engine start ................................................. 2-37Thigh extension .................................................. 1-5Three-way catalyst .............................................. 5-4Tilt/telescopic steering...................................... 3-24Tire

Flat Tire - Visit dealer warning ..................... 2-26Run-flat tires .................................................. 6-4Tire replacement indicator............................ 2-29Tire rotation ................................................. 8-38

Tire pressureLow tire pressure warning light .................... 2-15

Tire Pressure Low - Add Air warning.................. 2-25Tires

Flat tire .......................................................... 6-3Low tire pressure warning system ... 5-4, 6-3, 8-30Run-flat tires ................................................ 8-36Tire and Loading information label...... 8-31, 9-13Tire chains ................................................... 8-37Tire dressing.................................................. 7-4

Tire pressure................................................ 8-30Tire Pressure MonitoringSystem (TPMS).............................. 5-4, 6-3, 8-30Types of tires ............................................... 8-35Uniform tire quality grading ......................... 9-19Wheel/tire size .............................................. 9-9Wheels and tires.......................................... 8-30

TowingFlat towing................................................... 9-19Tow truck towing............................................ 6-8Towing a trailer ............................................ 9-19

TPMSTire Pressure Monitoring System... 5-4, 6-3, 8-30

TPMS, Tire pressure monitoring systemTPMS with Tire Inflation Indicator................... 5-7

Trailer towing.................................................... 9-19Transceiver

HomeLink® Universal Transceiver ................. 2-61Transmission

Automatic transmission fluid (ATF) ............... 8-15Driving with automatic transmission ............ 5-14Transmission shift lever lock release............ 5-18

Transmitter (See remote keyless entry system) ... 3-14Traveling or registering your vehicle inanother country ................................................ 9-11Trip computer ................................................... 2-31Trip odometer ................................................... 2-33Trunk

Interior trunk lid release .............................. 3-21Light ............................................................ 2-60Trunk hooks................................................. 2-53

Trunk lid ...................................................... 3-19Trunk lid release switch ............................... 3-19Trunk open request switch ........................... 3-19Trunk release power cancel switch ............... 3-20

Turn signal switch............................................. 2-47

U

Underbody cleaning ............................................ 7-3Uniform tire quality grading .............................. 9-19

V

Vanity mirror..................................................... 3-28Vanity mirror lights ........................................... 2-60Vehicle

Dimensions.................................................. 9-10Recovery (freeing a stuck vehicle) ................ 6-11Vehicle Dynamic Control (VDC) off switch ..... 2-48Vehicle Dynamic Control (VDC) system ....... 5-108Vehicle Dynamic Control (VDC)warning light ............................................... 2-18

Vehicle identification number (VIN) ................... 9-11Vehicle information display ............................... 2-21Vehicle loading information .............................. 9-16Vehicle security system..................................... 2-35Ventilators .......................................................... 4-2

W

WarningBlind Spot Warning (BSW) system................ 5-38

10-7

Page 399: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

10-8

Flat Tire - Visit dealer warning ..................... 2-26Hazard warning flasher switch ....................... 6-2Lane Departure Warning (LDW) system......... 5-31Predictive forward collisionwarning system ........................................... 5-94Tire Pressure MonitoringSystem (TPMS).............................. 5-4, 6-3, 8-30Vehicle information display .......................... 2-21Warning lights ............................................. 2-12Warning/indicator lights andaudible reminders........................................ 2-12

Warning labelsAir bag warning labels ................................. 1-50

Warning light .................................................... 2-12Air bag warning light ......................... 1-50, 2-17Anti-lock Braking System (ABS)warning light ............................................... 2-13Brake system warning light (yellow) ............. 2-13Brake warning light (red) ............................. 2-13Direct Response Hybrid® System warninglight (hybrid system warning light)............... 2-14Forward emergency braking systemwarning light ............................................... 2-15Low fuel warning light ................................. 2-15Low tire pressure warning light .................... 2-15Power steering warning light........................ 2-17Seat belt warning light and chime ............... 2-17

WarrantyEmission control system warranty ................ 9-20

Washer switchWindshield wiper and washer switch ........... 2-38

Washing ............................................................. 7-2Waxing ............................................................... 7-2Wheel/tire size ................................................... 9-9Wheels and tires............................................... 8-30

Care of wheels ............................................... 7-3Cleaning aluminum alloy wheels .................... 7-3Cleaning bright wheels .................................. 7-4

Window washer fluid ........................................ 8-16Window(s)

Cleaning ........................................................ 7-3Power windows............................................ 2-54

Windshield wiper and washer switch ................ 2-38Wiper

Rain-sensing auto wiper system................... 2-40Windshield wiper and washer switch ........... 2-38Wiper blades ............................................... 8-21

Page 400: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

MEMO

10-9

Page 401: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

FUEL INFORMATION:Use unleaded premium gasoline with anoctane rating of at least 91 AKI (Anti-KnockIndex) number (Research octane number96).

If premium gasoline is not available,unleaded regular gasoline with an octanerating of 87 AKI number (Research octanenumber 91) may be temporarily used, butonly under the following precautions:

. Have the fuel tank filled only partiallywith unleaded regular gasoline, and fillup with unleaded premium gasoline assoon as possible.

. Avoid full throttle driving and abruptacceleration.

Use unleaded premium gasoline for max-imum vehicle performance.

CAUTION

. Using a fuel other than that specifiedcould adversely affect the emissioncontrol systems, and may also affectwarranty coverage.

. Under no circumstances should a leadedgasoline be used, because this willdamage the three way catalyst.

. Do not use E-15 or E-85 fuel in yourvehicle. Your vehicle is not designed torun on E-15 or E-85 fuel. Using E-15 or E-85 fuel in a vehicle not specificallydesigned for E-15 or E-85 fuel canadversely affect the emission controldevices and systems of the vehicle.Damage caused by such fuel is notcovered by the INFINITI new vehiclelimited warranty.

. U.S. government regulations requireethanol dispensing pumps to be identi-fied by a small, square, orange and blacklabel with the common abbreviation orthe appropriate percentage for thatregion.

For additional information, see “Capacitiesand recommended fuel/lubricants” (P.9-2).

ENGINE OIL RECOMMENDATION:. Genuine NISSAN engine oil or equiva-

lent. Engine oil with API Certification Mark. Viscosity SAE 5W-30See “Capacities and recommended fuel/lubricants” (P.9-2) for engine oil and oilfilter recommendation.

COLD TIRE PRESSURES:The label is typically located on the driverside center pillar or on the driver’s door.For additional information, see “Wheelsand tires” (P.8-30).

NEW VEHICLE BREAK-IN PROCE-DURES RECOMMENDATION:During the first 1,200 miles (2,000 km) ofvehicle use, follow the recommendationsoutlined in the “Break-in schedule” (P.5-99) of this Owner’s Manual. Follow theserecommendations for the future reliabilityand economy of your new vehicle.

GAS STATION INFORMATION

Page 402: 2014 Infiniti Q50 Hybrid | Owner's Manual | Infiniti USA · The car itself is important, but ... Hybrid System Overview Hybrid System Illustrated table of contents 0 Safety — Seats,

2014 Infiniti Q50 Hybrid Owner’s Manual

Prin

ting

: Jun

e 20

13 (0

1) /

OM

14E

HV

37U

0 /

Pri

nted

in U

.S.A

.For your safety, read carefully and keep in this vehicle.2014 Infiniti Q

50 Hybrid