7/27/2019 Z22DoubleSuctionAxiallysplitSingleStageCentrifugalPumpEN_E10118
1/2
BearingsGrease lubricated bearings designed for a calculated bearinglife of at least 80 000 hours, which is equivalent to 10 years con-tinuous service. Only maintenance of bearings and shaft sealsare necessary.
Deflectors and V-ring seals protect the bearings againstmoisture and dirt ingress both when running or at standstill.
The bearing brackets are drilled as standard for SPM nipplesand can also be fitted with temperature sensors.
The rigid axial thrust bearing can take high external axialloads, and the pumps can therefore be vertically mounted.
Your benefits
* Optimal reliability.Sturdy design ensures smooth and trou-ble-ree operation.
* High eciency.The design guarantee high eciencies andlarge energy savings year in and year out.
* Low installation costs.Double suction impellers with lowerNPSH requirements give minimal installation costs.
* Maximum fexibility.Wide range with many installation op-tions to meet specifc applications needs.
* Simplicity o service. Easy dismantling thanks to the splitcasing design.
ApplicationsSulzer split casing pump, series Z22, our workhorse for manydemanding operations. They are trusted for pulp and paperproduction as head box pumps and dilution pumps. In waterand sewage works, district heating systems, power plants andother critical applications.
Design
The Z22 series comprises of 24 sizes with different impeller de-sign available. This flexibility ensures that energy consumptionis minimised throughout a pumps complete operating range.
Many of these pumps have a peak efficiency of over 90%.Each pump is tested to ISO 9906, Grade 2, or other agreedstandard.
Pump casingPumps generating high heads are designed to reduce radialforces, ensuring minimal shaft deflection and low bearingloads.
The casing is axially split, which permits removal of the com-plete rotor without moving either the piping or the motor.
Replaceable wear rings between the suction and dischargeside enable high efficiency throughout the whole lifetime of thepump.
ImpellerThe closed impellers are designed for optimum flow conditions.Each impeller is dynamically balanced according to ISO 1940,Grade 6.3 (For fan pump Grade 2.5).
Double suction low pulsation impellers are available de-signed to meet stringent performance requirements for headbox pumps. These impellers gives practically zero hydraulicaxial forces and have low NPSH requirements which givesreduced installation costs.
For each pump size there are normally two or more impellervariants available to best suit various applications.
Shaft and shaft sleevesSturdy shaft/bearing construction ensures smooth running withvery low vibrations.
The shaft deflection at the seal positions is less than 0.05mm. At its entire length the shaft is protected by shaft sleeves,which are O-ring sealed.
Shaft sealsAll sizes can be supplied with mechanical seals and most sizeswith gland packing.
Properties
50 Hz
Z22 Double-Suction Axially-SplitSingle-Stage Centriugal Pump
Capacity 500-20000 m3/h
Head 10-200 m
Temperature Max. 100-140C depending on size
and material
Pressure rating PN6 to PN25 owing to pump size
and material
Flanges ISO 7005 PN10-PN25 or
ANSI 125-150
Lubrication Grease as standard
7/27/2019 Z22DoubleSuctionAxiallysplitSingleStageCentrifugalPumpEN_E10118
2/2
200
m
100
50
40
30
20
10
500 1000 5000 10000 20000 m3/h
350/300-61
350/350-45
350/300-35450/400-40
450/400-40
350/300-35
350/350-45
400/300-60 400/300
-55
400/350-70
500/300
500/400-50
500/400-55
(600/400-85)(1000 r/min)
500/400-60
500/400-70
500/400-80
600/400-90
600/400-90
800/600-105
600/600-75
700/700-65
700/700-65
900/800-90
1000/1000-90
1000/1000-90
-75
1000 r/min
1000 r/min
1000 r/min
750 r/min
1000 r/min
1000 r/min
1000 r/min
1000 r/min
1000 r/min
1000 r/min
750 r/min
600 r/min
1000 r/min
750 r/min
750 r/min
900/800-90
500 1000 5000 l/s
1500 rpm
600/600500/500-70
-651000 r/min
250/200-40
800/600-120
1000
r/min
1000 r/min
500/400-50
1500
r/min
500/400-55
800/700-801000 r/min
rpm 600 750 1000 1500
www.sulzer.com
E10118 en 5.2012 Sulzer Pumps
All pumps can be installedhorizontally or vertically andsome can be supplied withright-angle connections.
Flexible steel support de-sign makes it easily to adoptcustomers special require-ments, mostly incline suctiondischarge configuration.
For vertical installationsthe motor can be mountedon a tripod and driven via acardan shaft to the stool-mounted pump. The pumpcan also be mounted on astool and driven via a cardanshaft.
Type designations
Installation versions
Materials
Performance curves
Code 01 02 05 06 07 24 41
Pump casing Cast iron Cast iron Cast iron Nodular Nodular Stainless Bronze
0120 0120 0120 iron 0717 iron 0717 steel 2324 5444Wear rings Cast iron Bronze Stainless Cast iron Bronze Stainless Bronze
0120 5204-15 steel 2324 0120 5204-15 steel 2324 5204-15
Impeller Cast iron Bronze Stainless Cast iron Bronze Stainless Bronze
0120 5444 steel 2324 0120 5444 steel 2324 5444
Shat Steel Steel Stainless Steel Steel Stainless Stainless
1650/1672 1650/1672 steel 2324 1650/1672 1650/1672 steel 2324 steel 2324
Shat sleeve Bronze Bronze Stainl. steel Bronze Bronze Stainl. steel Bronze
5204-15 5204-15 2377/2348 5204-15 5204-15 2377/2348 5204-15
Z22 Pump series
800 Inlet dia.
(mm)
700 Outlet dia.
(mm)
-80 Impeller dia.
(cm)
Z22 800/700-80
This data sheet is a general presentation. It does not provide any warranty or guarantee of any kind. Please, contact us for a description of the warranties and guarantees offered withour products. Directions for use and safety will be given separately. All information herein is subject to change without notice.