Proprietary & Confidential
Page 1 of 7
XCAP-M Series (For Multi Technologies)
Release Notes
July 2012
Page 2 of 7
Proprietary & Confidential
1. Introduction XCAP‐M Series supports all technologies such as LTE, WiMAX, UMTS, GSM, CDMA, EVDO. It replaces XCAP‐LTE series.
2. Scope This document contains release note history of XCAP-M series. The latest version of XCAP-M is:
XCAP-M 5.5.13 Setup XCAP-M 5.5.32 Patch
Page 3 of 7
Proprietary & Confidential
XCAP‐M VERSION INFORMATION
5.2.127 – main features: 1. Qualcomm GSM – Serving Cell Info>Full FER and Sub FER (Added) by AA
*Calculation Method FER(%) = (CRC Fail Count)/(CRC Pass Count + CRC Fail Count)*100.00(%) [within 1 second] Full FER Condition TCH and SACCH (0x5179 Channel: 4, 7~12) Sub FER Condition SACCH and SID (0x5179 Channel: 4, 15~18, 22~23)
1. AMC Expiration alarm pop‐up (Added) by Accuver From 30 days before AMC expiration to expiration date
From the day after expiration date
To give you a reference, we will change “Do not show…” to “Do not show this pop‐up for 1 week.
2. Qualcomm LTE Chipset: Decoding correction 0xB16D ver3 (LTE GM TX Report) 0xB1B1 ver1 (LTE ML1 TDD ACK NAK Report) 0xB177 ver1 (LTE ML1 Connected Mode Measurement Configuration) 0xB17A ver1 (LTE ML1 S Criteria Check Procedure) 0xB082 ver1 (LTE RLC DL AM All PDU)
5.2.140 main Features 1. LTE Call Flow Window issue fixed
Page 4 of 7
Proprietary & Confidential
2. LTE LGE chipset
RB Num is supported for both: Mode and Avg
For DL Grant & UL Ack/Nack Status Info(Improved) RB Assign is displayed:
5.2.142 – main features:
Fixed Altair RSRP decoding values
Fixed No information about Serving RSRP issue
Serving RSRQ estranged values fixed
Serving RSSI estrange values fixed
5.2.144 – main features:
Fixed processing issue of PN Scanner
Fixed processing issue of HSPA+ Log
5.2.163 – main features:
Qualcomm LTE Chipset: PHICH AckNack Info (Added) by LGE o PHICH AckNack Info
Page 5 of 7
Proprietary & Confidential
>PHICH Timing SFN >PHICH Timing Subframe Number >ACK Rate >NACK Rate >ACK Count >NACK Count
iPhone GSM Main Tree (Added) by Accuver
PS Call Statistics – LTE Air Drop (DM Reason Display)
PS Call Statistics – added Qualcomm LTE parameters
PUSCH BLER
PUSCH BLER at Call Result
LTE Signaling Message: Added parameters o NAS>TAC Procedure >Tracking Area Update Statistics o NAS>Attach Procedure>Attach Statistics o NAS>Detach Procedure>Detach Statistics o NAS>Detach Procedure>Detach Time
Qualcomm LTE Chipset: Power Info>Tx Power>AGC Channel Separation
Site Manager – Site Type [Added Pico and Femto] (Added)
Packet Viewer: VSNCP ‐ Protocol and Summary etc. display support
LTE<‐>WCDMA IRAT HO (Added) by Accuver
Page 6 of 7
Proprietary & Confidential
As of now, LTE Samsung/GCT/LGE/Qualcomm/HiSilicon are supported.
Test logs: same time and same route and different chipset.
Qualcomm LTE>ML1 Downlink/Uplink Info: NDI algorithm change
LTE Altair Chipset: PS Call Statistics (Added) By Accuver
o Serving PCI Serving RSRP Serving RSRP at Call Result Serving RSRQ Serving RSRQ at Call Result Serving RSSI Serving RSSI at Call Result Serving BW SINR 0 SINR 0 at Call Result SINR 1 SINR 1 at Call Result PRACH Tx Power PUCCH Tx Power
Page 7 of 7
Proprietary & Confidential
PUCCH Tx Power at Call Result PUSCH Tx Power PUSCH Tx Power at Call Result SRS Tx Power DL MCS 0(Avg) DL MCS 1(Avg) DL RB Num(Avg) DL RB Num(Mode) UL MCS(Avg) UL RB Num(Avg) UL RB Num(Mode) CQI 0(Avg) CQI 1(Avg) RI1 Rate RI2 Rate PMI(Mode) Total BLER Total BLER at Call Result BLER0 BLER1 L1 DL Throughput L1 UL Throughput ACK Rate NACK Rate Retrans. Rate
13. Voice Call Statistics support LTE Signaling Message. (Added)
PS Call Statistics: added parameters o # Inter RAT HO(4G‐>3G) Attempt
# Inter RAT HO(4G‐>3G) Success # Inter RAT HO(4G‐>3G) Failure # Inter RAT HO(3G‐>4G) Attempt # Inter RAT HO(3G‐>4G) Success # Inter RAT HO(3G‐>4G) Failure Intra‐LTE HO Duration(Min) Intra‐LTE HO Duration(Max) Intra‐LTE HO Duration(Avg) Intra‐LTE MR to HO Success Duration(Min) Intra‐LTE MR to HO Success Duration(Max) Intra‐LTE MR to HO Success Duration(Avg) Inter RAT HO(4G‐>3G) Duration(Min) Inter RAT HO(4G‐>3G) Duration(Max) Inter RAT HO(4G‐>3G) Duration(Avg) # serviceRequest # extendedServiceRequest # serviceReject Service Type CSFB Response # rrcConnectionRelease
LGE/GCT Chipset: DL Grant & UL Ack/Nack Status Info(Improved) ‐ New/Retrans Type(Added)
Qualcomm LTE>ML1 Serving Cell Info(Acquisition): PSS SNR and SSS SNR (Added)
LTE SQN Chipset: PS Call Statistics (Added) By Accuver
Serving PCI Serving RSRP Serving RSRP at Call Result Serving RSRQ
Page 8 of 7
Proprietary & Confidential
Serving RSRQ at Call Result Serving RSSI Serving RSSI at Call Result Serving Frequency CINR0 CINR0 at Call Result CINR1 CINR1 at Call Result PUCCH Tx Power PUCCH Tx Power at Call Result PUSCH Tx Power PUSCH Tx Power at Call Result SRS Tx Power DL MCS(Avg) DL QPSK Rate DL 16QAM Rate DL 64QAM Rate UL MCS(Avg) UL RB Num(Avg) UL QPSK Rate UL 16QAM Rate UL 64QAM Rate CQI(Avg) RI1 Rate RI2 Rate BLER BLER at Call Result DL Phy Throughput(Scheduled) DL Ack Rate DL Nack Rate UL Ack Rate UL Nack Rate PathLoss
Qualcomm LTE Chipset: TTI Level (Added) by LGE o LL1 PUCCH Tx Report(PerTTI) o LL1 PUSCH Tx Report(PerTTI) o ML1 PDSCH Stat Indication(PerTTI) o 19. Smart Phone>Android>CDMA Parameter Info (Added) By Accuver o BS LON/LAT and SNR o 20. Graph Overlay – Overlapped (Added) o It is supported in the case of 2 parameters is overlaid in one graph.
Page 9 of 7
Proprietary & Confidential
TEMS (FMT) log file is not imported. (Fixed)(BUG_202) by Accuver
Average count missing in CDMA statistics (Added) (BUG_332)
Message Duration Time>Detail message of downlinkDirectTransfer is missing(Fixed) by Accuver
Page 10 of
Proprietary & Confidential
5.2.175 – main features: The "SC Pollution" and "Neighbor List Analysis" issue had been resolved for DRT WCDMA Scanner. 5.2.180 – main features: Application throughput in PS Call Statistics and Parameter tree reporting different average value issue has been fixed. 5.2.189 – main features:
1. BUG_415 Samsung Reporting issue (fixed) by AA
2. BUG_385 Throughput value issue with XCAP (Changed) by AA
3. PCTEL EX TD‐LTE Scanner Main Tree Analysis (Added) by AA
PCI Pollution
Dominant Cell Holding Information
Neighbor List Analysis
4. Pie/Bar Graph Legend: Count Display (Added) by AA
5. HiSilicon LTE Chipset: PRB and VRB Num calculation change (Fixed) by AP
6. Qualcomm LTE Chipset: TA unit (Added)
MAC RACH Info>RACH Attempt>Timing Adjustment Value(MSG2)
Random Access Procedure>Random Access Response(MSG2)>Timing Advance
Timing Advance Info>Timing Advance(16Ts)
7. Qualcomm LTE Chipset: min(PMAX,TxPower) (Added) by AA
Power Info>min(PMAX,TxPower)
Page 11 of
Proprietary & Confidential
5.4.30 – main features:
1. CDF/PDF write status fail error when trying to create a CDF/PDF report that contains CINR statistics
2. ADO Exception error ‐ when trying to create auto report using Map display ‐ resolved
3. Unable to change symbol size in Map options when using Auto reporting ‐ issue resolved
4. LTE Analysis report issues resolved
5. UMTS Cell ID count mixed issue when sampling interval is changed ‐ resolved
5.4.47– main features:
1. [CRM QUE_319] Correlation graph units don't seem correct for Tput vs SINR(Fixed) by AA 2. [CRM QUE_313] Custom auto filter’s problem in table was fixed. by AA 3. [CRM BUG_507] Access Violation when processing log in XCAP(Log file name: Voz Curta 2 ‐ CLARO‐C1.7z)
(Fixed) by AA 4. [CRM BUG_500] XCAP Coverage info(EVDO Sample), when it overwrites, access violation error
occurs(Fixed) by AA 5. Grouping of WiMax technology in Message viewer filter (changed) by Accuver. 6. Add the status codes of success call(only FTP Call type)
You can find Detail Code1of FTP call event of table tab. ex) FIN MASK, RST MASK, Code221, Code226 etc.
7. Pilot Set info of EVDO Rev.A is separated by FA. (Changed) by Accuver. 8. LTE Analysis Report ‐ CINR 0/1 (Added) by AA 9. Call Flow of the M to M Statistics supports LTE RRC/NAS signaling message. 10. [CRM BUG_520] HO Statistics reported incorrectly when activating the parameter using signaling
message & site DB (Fixed) by AA
5.4.81– main features:
1. Map Legend Setting – Size
2. BUG_586(Auto report making up zero values): Fixed (AA) 3. BUG_554(Time stamps appear to be incorrect in Logging message): Added (AA)
Page 12 of
Proprietary & Confidential
4. Qualcomm LTE Signaling Message
5. In the LTE Signaling Message, if you do logging Qc Time, Time Difference refers to Qc Time instead of PC
TimeStamp. 6. Ex) LTE Signaling Message.RRC.Call.RRC Connection Procedure.RRC Connection Time 7. Qualcomm LTE parameters per TTI: sync improvement with other windows
8. MOD_119(PCTEL LTE TD Scanner spectrum analysis in XCAP ‐ No Map, No Table, No Graph): Added (AA) 9. Bug_606 Attach KPI statistics reporting duplicated Attach rejects (Fixed) AA 10. MOD_148 Modification request of Key Error Information.
Page 13 of
Proprietary & Confidential
11. BUG_567 Enhanced Inbuilding lock key (Added) by AA
5.5.13– main features: 1. To add the Voice Call Drop reason “Air Drop‐ Disconnected by RRC State)(added) by Accuver 2. Change the decision algorithm of CDMA Technology as below.(Changed) by Accuver
CDMA ‐ 0xA0A9 [StatusSnapShot mc status =3(CDMA System access), 4(CDMA Traffic Channel)], 0x1004(R‐CSCH), 0x1005(R‐DSCH),0x1008(F‐DSCH), 0x1090(F‐DCCH), 0x1091(R‐DCCH)
3. Change the source log code of CDMA/EVDO FA in system info (Phone status(0xA0A1), StatusSnapShot(0xA0A9), Active Set info ver2 (0x10C6), Enhanced Finger Info(0x1179), EVDO Signaling message (header ‐ FA) (Changed) by Accuver
4. ACU format delimiter is changed from comma to pipe (XCAP will no longer support comma delimiter.) by Accuver
5. [RNS Scanner] WCDMA Signal info (Added) by Accuver
Page 14 of
Proprietary & Confidential
6. CPU Usage is added as below. User can see the CPU monitoring result. (Added) by Accuver
7. To display Qualcomm Timestamp for VoLTE in main tree (i.e. RTP>Audio>Rx>Chipset TimeStamp) 8. Qualcomm LTE: To add Intrafreq Measurement Info SINR (Taking max value of between SINR0 or SINR1)
. 9. To add LTE Signaling Message>RRC>HO Statistics>Total Information ‐ HO Success Rate(%).
10. Qualcomm LTE: In statistics window and main tree – To completed further development for RB Num(Included in 0) (As an user perceived RB Num, it is considered when the user could not be allocated RB).
11. ML1 Downlink Info>RB Num(Mode): In traffic state, one packet message includes 25 TTIs. To take most frequently appeared value as a representative value.
12. ML1 Downlink Info>RB Num(Avg): In traffic state, one packet message includes 25 TTIs. To take arithmetic mean, instead of the most frequently appeared value.
13. ML1 PDSCH Stat Indication(PerTTI)>RB Num(Avg): To untie by TTI and display arithmetic mean of RB Num of messages within 1 second section. (There is a phenomenon which displays bigger value for this than Max RB Num. It is caused because messages are logged in with same logging time. E.g. for 10MHz bandwidth, it is higher than 50RB.
14. ML1 Downlink Info>RB Num(Included in 0): It is an complimentary of existing ML1 Downlink Info>RB Num(Avg) and ML1 PDSCH Stat Indication(PerTTI)>RB Num(Avg).
15. In Site Manager, to recognize MME ID in LTE tab as text string. (It has been amended because some customers entered IP format for MME ID, and it is not good when declaring X2 or S1 based HO based on Site DB for LTE.)
Page 15 of
Proprietary & Confidential
16. Application of LTE RLC Layer Decoding R10 (Qualcomm LTE RLC Layer): To show SN in Detail in Logging Message Viewer.
17. To amend to change size in Map Legend. (When right‐clicking in Map Legend box, Map Legend Setting is to be appeared.)
18. To support total voice call statistics window (Sync + Async) 19. Qualcomm LTE: To improve Time Syncing for untying items by TTIs. 20. Samsung HSPA: To apply changes on 4.31 ICD. 21. BUG_674: LTE PCTEL Scanner ‐ RSSI Information ‐ Grayed out ‐ Model Tree (Fixed) by AA 22. BUG_586: Autoreport making up zero values: Count string problem (Fixed) by AA 23. LTE RB Scheduling Map‐ DL
In order to use this function, the following codes should be logged. Qualcomm LTE.LL1 PDSCH Demapper Config(PerTTI): 0xB126 Qualcomm LTE.LL1 PUSCH Tx Report(PerTTI): 0xB139
- -
Phase I supports Separate Model and Merge Model only (For only the models logged in the same time).
24. To add PS Call Statistics – PDSCH RB Share and PUSCH RB Share: For Traffic section only.
When actual RB is allocated on mobile, logging is conducted. And when untie by TTI, SFN/Subframe Num
of at the actually allocated time point is recognized.
Based on this value, allocation rate is calculated by dividing Count(SFN/Subframe Num) of RB within 1
second with 1000.
Page 16 of
Proprietary & Confidential
Notice) To activate PDSCH RB Share and PUSCH RB Share, activate main tree before opening PS statistics window. PDSCH RB Share Qualcomm LTE.ML1 PDSCH Stat Indication(PerTTI) PUSCH RB Share
25. Qualcomm LTE.ML1 GM Tx Report(Per TTI) 26. LTE Docomo.WCDMA.Quality Measure Info.CQI(Representative) in Main Tree (Added) 27. Qualcomm LTE Chipset: MAC UL TB(Per TTI) in Main Tree (Added) by NSN 28. LTE Signaling Message.RRC.RRC State in Main Tree (Modified) 29. (UL CCCH) rrcConnectionRequest: RRC Idle 30. Qualcomm LTE Chipset: ML1 GM Tx Report(Per TTI) (Added) 31. LTE Signaling.RRC. HO Statistics.HO(LTE‐>1xRTT) (Added) 32. XCAP crash when open thie log file (Bug607) by APEC (Fixed) 33. Add CSFB call setup latency time (Mod170) by APEC (Added)
34. Attach KPI statistics reporting duplicated Attach rejects (Bug606) by AA (Fixed)
Page 17 of
Proprietary & Confidential
35. To add fix a Column in table sheet (by Accuver)
After pressing the header of column that user wants to fix, select the fix a column function. 36. To add M to M button in Model Manager window for easier and speedy transition for transmit/receive
models. It is supported only for the paired model based on M to M statistics.
a. Click M to M button.
b. M to M Information window appears.
Page 18 of
Proprietary & Confidential
c. Select a model name, and click Open button. d. The model is selected for analysis
5.5.20 – main features:
LTE Analysis Report
LTE Analysis Report Throughput issue fixed
Auto Reporting: Filtering issue fixed
SQN LTE Serving Cell and Coverage Line
Altair LTE PDCP Throughput Info fixed
Qualcomm LTE Intrafreq Measurement Top Set Sorting RSRP RSRQ implemented
Samsung‐Via Chipset: LTE to eHRPD HO implemented
5.5.32 – main features: New features
Spectrum Analysis function implemented for DTI scanner Issues Fixed
LTE Analysis Report: Exclusion zone feature not calculating results correctly
Top Related