5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
1/28
Computer Systems Division
- 1 -
Disassembly and ReassemblyWilliam-XE500T1
Computer systems Division
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
2/28
Computer Systems Division
- 2 -
1. Turn off the power before disassemblingthe system.
WILLIAM : Main System
2. USB and SD CARD and USIM CARD is removed beforethe system breaks down
12 3
3. If DUMMY DOCKING be removed.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
3/28
Computer Systems Division
- 3 -
3. Decomposed by the disassemble mechanism
* Disassembly Jig
WILLIAM : Main System
When using the Disassembly Jig: Do not make excessive gaps. UNIT-BACK Disassembly : Separation from the other side of the uHDMI Port.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
4/28
Computer Systems Division
- 4 -
1 2
546
7
10
9
8
3
11
12
1314
WILLIAM : Main System
William - Disassembly Sequence
1st Disassembly : In regular sequence
2nd Disassembly : 2st disassemble start.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
5/28
Computer Systems Division
- 5 -
WILLIAM : Main System
Home button
Disassembling point, need to take care to prevent deformation of product (Docking connector area)
- Need to take care because this area can be broken easily against careless, too much load.
Docking
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
6/28
Computer Systems Division
- 6 -
Start disassembling (Back Disassembling)
BACK COVER OPEN
WILLIAM : Main System
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
7/28
Computer Systems Division
- 7 -
Before disassembling, remove the FPC / CABLE.
WILLIAM : Main System : Port Door
1
2-1
82-2
3-1
3-2
4-14-2
5-1 5-26-1
6-2
7-1 7-2
9 10 11 12
13-1
13-2
13
14-1
14-2
Mainboard
1,2-2,3-2,4-2,5-2,6-2,
7-2,8,9,10,11,12,13
BATTERY 2-2,3-2,8,13
3G/4GWLAN
7-1,13-1,13-2
board
3-1 , 14-1
HDMIboard
4-1
Buttonboard
5-1
SD/SIMboard
6-1
DC JACKboard
14-2
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
8/28
Computer Systems Division
- 8 -
WILLIAM : Main System
Speaker RSpeaker L
SD/SIM board
BRACKET 34G
1. Main board Disassembling
After checking 6 Page , remove the FPC
Main board : 1,2-2,3-2,4-2,5-2,6-27-2,8,9,10,11,12,13
Bracket 3/4G, Battery, Speaker L , Speaker R ,SD/SIM board : Screw removal.
Speaker R Speaker L
BRACKET 34GSD/SIM board
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
9/28
Computer Systems Division
- 9 -
2. Battery Disassembling
After checking 6 Page , remove the FPCBATTERY : 2-2,3-2,8,13
Remove the 10 screws to disassemble the battery.
WILLIAM : Main System
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
10/28
Computer Systems Division
- 10 -
3. 3G/4G Module Disassembling
After checking 6 Page , remove the FPC.3G/4G Module : 7-1,13-1,13-2
Bracket 34G : Remove the two screws.
Cable Pull the left.
WILLIAM : Main System
BRACKET 3/4G
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
11/28
Computer Systems Division
- 11 -
4. Docking board Disassembling
After checking 6 Page , remove the FPC / CABLEDocking board : 3-1 ,14-1
Remove the two screws.
WILLIAM : Main System
5. HDMI board Disassembling
After checking 6 Page , remove the FPCHDMI board : 4-1
Remove the two screws.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
12/28
Computer Systems Division
- 12 -
6. BUTTON board Disassembling
After checking 6 Page , remove the FPC.Button board : 5-1
Remove the 2 screws.
WILLIAM : Main System
7. SD/SIM board Disassembling
After checking 6 Page , remove the FPC.SD/SIM board : 6-1
Remove the 3 screws.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
13/28
Computer Systems Division
- 13 -
WILLIAM : Main System
8. DC JACK board Disassembling
After checking 6 Page , remove the FPCDC JACK board : 14-2
Remove the 2 screws.
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
14/28
Computer Systems Division
- 14 -
WILLIAM : Main System
SIM / SD Sub Board
Docking Sub Board
Button Sub Board
DC Jack SubBoard
HDMI Sub Board
LCD Integrationis not possible because
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
15/28
Computer Systems Division
- 15 -
Disassembly and Reassembly
Keyboard Dock)
AA-RD7NMKD - William
AA-RD8NMKD - Jones
IT solutions Division N/P lab
Keyboard Dock
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
16/28
Computer Systems Division
- 16 -
(1) Lay system down on a flat surface.
(2) Using a sharp end(screw driver, tweezers, etc.,)carefully remove the rubber feet(4 total).
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
17/28
Computer Systems Division
- 17 -
(1) Push front HINGE down to separate the top
unit from the bottom unit.
(2) After removing the RUBBER_FOOT appearance
( circle)
(2) Bottom Disassembly Flow.()
Bottom and Top Disassembly
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
* Need careful disassembling processto prevent breakage of product
* Diassembly Jig
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
18/28
Computer Systems Division
- 18 -
Cable Routing
USB SUB BD CABLE DC CABLE
POGO CABLE
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
19/28
Computer Systems Division
- 19 -
Prepare Main BD & Housing-Top_DockDisassembly
KEYBOARD membrane
T/P FFC
(1) Remove 2 screw, and remove Main BD.(Red circle)
(2) T/P FFC & KEYBOARD (Red Square) Pull and remove it.
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
20/28
Computer Systems Division
- 20 -
(1) Remove tape on that.
If cable assy do not be followed MFG,cable can be damaged by Bottom Rib
USB CABLE ROUTING
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
21/28
Computer Systems Division
- 21 -
(1) Remove 2 screw, and remove USB SUB BOARD.
USB SUB BOARD/Main BD to HOUSING-TOP Disassembly
USB CABLE
(2) USB CABLE (Red Square) Pull and remove it.
[After removing the MAIN BOARD appearance]
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
22/28
Computer Systems Division
- 22 -
Housing Top & Housing_Stand Disassembly
(1) Remove Hinge Screw 3 (Each left side, right side).
[After removing the UNIT/HOUSING-TOP appearance.]
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
23/28
Computer Systems Division
- 23 -
HOUSING-STAND & HOUSING-STAND_COVER Disassembly
(1) Remove each red circle marked screw from
HOUSING-STAND & HOUSING-STAND_COVER.
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
24/28
Computer Systems Division
- 24 -
Housing_Stand_Cover & Knob_Housing_Stand Disassembly
Knob_Housing_Stand SPRING ETC DOCKING
(1) After removing the Housing_Stand_Cover appearance.
HOUSING_STAND_COVER
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
25/28
Computer Systems Division
- 25 -
Spring-Knob_Battery , Unit-Bracket_Magnet Disassembly
(1) Remove 2 screw( ), and remove SPRING-KNOB_BATTER( ).
(2) Unit-Bracket_Magnet Disassembly.
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
26/28
Computer Systems Division
- 26 -
Assemble POGO CABLE Disassembly
(1) POGO CABLE Remove. ( )
POGO CABLE
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
27/28
Computer Systems Division
- 27 -
HINGE Disassembly
(1) Remove Hinge Screw 3 (Each left side, right side).
HINGE-L HINGE-R
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
5/20/2018 William-XE500T1 Chap3.Disassembly and Reassembly ENG 2.1
28/28
28
Housing_Stand Disassembly
(1) TAPE-ETC_STAND_CABLE Remove. ( circle )
[ After removing the Housing_Stand appearance ]
1. Keyboard Dock
AA-RD7NMKD,AA-RD8NMKD)
Top Related