1-800-568-43911
Field cultivator sweeps, points and accessories 02
Row crop sweeps, points and reversible blades 11
Chisel plow sweeps, points and blades 15
Subsoiler points and accessories 27
Disc blades 33
Planter/drill seed opener blades and coulters 39
Plow parts 46
Fertilizer knives 60
Miscellaneous parts 61
Bolts and nuts 64
Transportation, terms and warranty 67
Table of contents
Field Cultivator Sweeps, Points and Accessories
1-800-568-43912
Wiese Viper sweep
All Wiese Viper sweeps are 7.5mm thick (.296”) heat-treated steel. The thicker material and long nose provide superior wear compared to conventional 6mm (.250") thick sweeps. The built-in stem pro-tector also minimizes wear on bolts and stem. The unique flanged wing improves soil flow and reduces breakage. Recommended replacement style for DMI and Case DMI field cultivators, Brady (after 1971), Brillion (after 1986), Case IH 4500, 4600, 4800, Glencoe 4300, Hiniker, IH 45, John Deere 940, 960, 980, 985, 726 mulch finisher, Kent, Krause 4200, 4250, 3100, 6100, Landoll, M&W, Noble, Sunflower, Wil-Rich.
Part # Stem angle Bolt size Center Width Weight/ea47VP4507 47˚ 7/16” 1-5/8”-1-3/4” 4.50” 2.2lbs
47VP7257 47˚ 7/16” 1-5/8”-1-3/4” 7.25” 3.3lbs
47VP9257 47˚ 7/16” 1-5/8”-1-3/4” 9.25” 3.8lbs
47VP10257 47˚ 7/16” 1-5/8”-1-3/4” 10.25” 4.3lbs
47VP11257 47˚ 7/16” 1-5/8”-1-3/4” 11.25” 5.1lbs
BKP76112FN Boltkit Boxof50ea.7/16"x1-1/2"PHboltsw/flangenut
Wiese Nok-On Viper Sweeps are designed to install by simply pounding off the old sweep and pounding on the new sweep without having to replace several bolts. All Nok-On Viper Sweeps are 7.5mm thick material. Will fit Nichols Q2747 mounting bracket.
Part # Stem angle Width Weight/ea47VPFT077 47˚ 7.25” 2.6lbs
47VPFT097 47˚ 9.25” 2.9lbs
VPFT7(clip) N/A N/A 5.0lbs
VPFTSP(spring) N/A N/A .05lbs
Field Cultivator Sweeps, Points and Accessories
1-800-568-4391
The path to success includes a
Finish Line™ An Evolution in Sweep Design
From
Corn roots need to go somewhere. The best place for them is DOWN!
Make that path easier with the Finish Line™ cultivator sweep.
The patent pending design features an agronomically engineered blade on the
bottom of the sweep that creates a narrow slit below the operating depth.
Available for Spring 2018 in 7” and 9” in the
following styles: Wiese Viper-47VP7257FL, 47VP9257FL
• Unique innovation of vertical tillage and cultivator sweep design
• Reduce or eliminate the compaction and horizontal density layer created by traditional cultivator sweeps
• Maintain residue and incorporate chemicals while leveling
• Vertical relief pattern for developing plant roots• Help maximize the crop’s total yield potential
Wiese Industries (800)568-4391 (515)465-9854 Fax: (515)465-9858 www.wieseindustries.com
As seen at the 2017 Farm Progress Show in Decatur, IL
See the video on YouTubeby searching for Finish Line Sweep
3
Field Cultivator Sweeps, Points and Accessories
1-800-568-43914
Conventional field cultivator sweeps
All of our conventional field cultivator sweeps are 6mm thick high-carbon, heat-treated steel. The stay- wide design insures that the sweep will maintain the specified cutting width throughout the life of the sweep.
The 47˚ WCC series sweeps listed below will fit the following machines: Brady (after 1971), Brillion (after 1986), Case IH 4500, 4600, 4800, DMI, Glencoe 4300, Hiniker, IH 45, John Deere 940, 960, 980, 985, 726 mulch finisher, Kent, Krause 4200, 4250, 3100, 6100, Landoll, M&W, Noble, Sunflower and Wil-Rich.
Wiese McKay-Empire Part # Part # Bolt size Center Width Weight/eaWCC4B7 202-4-4 7/16” 1-5/8”-1-3/4” 4” 1.6lbs
WCC6B7 202-6-4 7/16” 1-5/8”-1-3/4” 6” 2.1lbs
WCC7B7 202-7-4 7/16” 1-5/8”-1-3/4” 7” 2.2lbs
WCC8B7 202-8-4 7/16” 1-5/8”-1-3/4” 8” 2.3lbs
WCC9B7 202-9-4 7/16” 1-5/8”-1-3/4” 9” 2.7lbs
WCC10B7 202-10-4 7/16” 1-5/8”-1-3/4” 10” 3.1lbs
WCC11B7 202-11-4 7/16” 1-5/8”-1-3/4” 11” 3.2lbs
WCC12B7 202-12-4 7/16” 1-5/8”-1-3/4” 12” 3.3lbs
TIP: A special boltwitha7/16”headand3/8”threadedbodymaybeusedonfieldcultivatorswith3/8”holesintheshank.ReducesweepinventorybystockingBPH7163812 bolts along with standard 7/16"bolts.
Field Cultivator Sweeps, Points and Accessories
1-800-568-43915
Conventional field cultivator sweeps continued
The sweeps listed below will fit the following machines: Bush Hog, Case FC-FCM, FCW, Ford 208, Glencoe FC-MFC-FCSW, 101, Kewanee, Krause 600, 900, MF 160, Oliver 285, 385, 485, Taylor.
Wiese McKay-Empire Part # Part # Bolt size Center Width Weight/eaWCC4B3 101-4-4 3/8” 1-5/8”-1-3/4” 4” 1.6lbs
WCC7B3 101-7-4 3/8” 1-5/8”-1-3/4” 7” 2.2lbs
WCC8B3 101-8-4 3/8” 1-5/8”-1-3/4” 8” 2.3lbs
WCC9B3 101-9-4 3/8” 1-5/8”-1-3/4” 9” 2.7lbs
WCC10B3 101-10-4 3/8” 1-5/8”-1-3/4” 10” 3.1lbs
WCC12B3 101-12-4 3/8” 1-5/8”-1-3/4” 12” 3.3lbs All of our 41˚ WFC series conventional field cultivator sweeps are 6mm thick heat-treated steel. The stay-wide design insures that the sweep will maintain the specified cutting width throughout its life. The sweeps listed below will fit the following machines: Allis Chalmers (early models only), Brady (early models only), Brillion (prior to 1986), Glencoe 1250 double shank, John Deere CCA-C10-C20, 1000 series, Krause K-tine, White/Oliver 245, 345.Note: Some Allis Chalmers, Buffalo, Du-All, Forrest City fieldcultivatorsrequire54˚sweeps.
Wiese McKay-Empire Part # Part # Bolt size Center Width Weight/eaWFC4B3 303-4-4 3/8” 1-5/8”-1-3/4” 4” 1.6lbs
WFC6B3 303-6-4 3/8” 1-5/8”-1-3/4” 6” 2.1lbs
WFC7B3 303-7-4 3/8” 1-5/8”-1-3/4” 7” 2.2lbs
WFC9B3 303-9-4 3/8” 1-5/8”-1-3/4” 9” 2.7lbs
WFC10B3 303-10-4 3/8” 1-5/8”-1-3/4” 10” 3.1lbs
WFC12B3 303-12-4 3/8” 1-5/8”-1-3/4” 12” 3.3lbs
Field Cultivator Sweeps, Points and Accessories
1-800-568-43916
Fas-Tach
Wiese Fas-Tach style sweeps provide a quick change-over method. Instead of changing out bolts, you can simply pound the old sweeps off and pound the new sweeps back on, minimizing down time. Fas-Tach are all 6mm thick and have the same wing design as our WCC and WFC series sweeps.
Wiese McKay-Empire Part # Part # Bolt size Center Weight/eaFT7W 16107K1 7/16" 1-3/4"-2" Mountingbracket 0.5lbs
Stem angle Width1FT7BW 15607K1 41˚ 7” 3.1lbs
1FT9BW 15609K1 41˚ 9” 3.4lbs
7FT4BW 16204K1 47˚ 4” 1.1lbs
7FT7BW 16207K1 47˚ 7” 3.1lbs
7FT8BW 16208K1 47˚ 8” 3.2lbs
7FT9BW 16209K1 47˚ 9” 3.4lbs
7FT10BW 16210K1 47˚ 10” 3.6lbs
McKay-Empire Field Cultivator Sweeps
AS49 series sweeps have a very low crown designed for minimum soil disturbance.These sweeps will leave little to no ridge at high speeds while maintaining superior cutting and wear. The AS49 sweeps are intended to fit Versatile and Wil-Rich cultivators, but may be used on any field cultivator with the samestemangleandboltcenters.AllAS49sweepsare1/4"heat-treatedsteel.
Part # Stem Angle Bolt size Center Width Weight/eaAS49-07 47˚ 7/16" 1-3/4" 7" 2.4lbs
AS49-09 47˚ 7/16" 1-3/4" 9” 3.0lbs
Field Cultivator Sweeps, Points and Accessories
1-800-568-4391
McKay Empire Slimwedge™ to fit Field Cultivators
McKay Empire Slimwedge sweeps provide a wide variety of sweep and opener options along with a quick change-over method. Bolt the clip and spring onto the field cultivator shank and then drive on the sweep until the spring pops through the mounting hole. Release the sweep by compressing the spring and striking the top of the stem. A Retainer Release Tool (RRT-1) is available to assist with removal.Availablein1/4"or5/16"heat-treatedsteel.
Part # Bolt size Center Weight/eaSW47-134L AdaptorClip 7/16" 1-3/4" 1.1lbs
SWR-2 Spring Retainer
Part # Thickness Width Weight/eaSW14-2P 1/4" 2”Penetrator 1.7lbs
SW14-3P 1/4" 3"Penetrator 2.0lbs
SW14-4 1/4" 4" 2.3lbs
SW14-55 1/4" 5-1/2" 2.5lbs
SW14-6 1/4" 6" 2.6lbs
SW14-7 1/4" 7" 2.9lbs
SW14-8 1/4" 8" 3.2lbs
SW14-9 1/4" 9" 3.3lbs
SW14-10 1/4" 10" 3.8lbs
SW14-11 1/4" 11" 4.1lbs
SW516-2P 5/16" 2”Penetrator 2.1lbs
SW516-3P 5/16" 3"Penetrator 2.4lbs
SW516-4 5/16" 4" 2.6lbs
SW516-55 5/16" 5-1/2" 3.2lbs
SW516-6 5/16" 6" 3.3lbs
SW516-7 5/16" 7" 3.6lbs
SW516-8 5/16" 8" 3.9lbs
SW516-9 5/16" 9" 4.3lbs
SW516-10 5/16" 10" 4.6lbs
SW516-11 5/16" 11" 5.1lbs
7
Field Cultivator Sweeps, Points and Accessories
1-800-568-43918
Double points
DP points are drop-forged for superior wearability and have a self-sharpening edge that provides good soil penetration throughout the life of the point. All DP series pointsareextra-heavy3/8”thick,high-carbon,heat-treatedsteel11-3/4”long.Availableplainorhardsurfaced.
Part # Bolt size Center Width Weight/eaDP2238 3/8” 1-5/8”-1-3/4” 2” 2.0 lbs
DP2276 7/16” 1-5/8”-1-3/4” 2” 2.0 lbs
DP2276S 7/16” 1” - 2” 2” 2.0 lbs
DP223 3/8” 2” 2” 2.0 lbs
DP2237 7/16” 2” 2” 2.0 lbs
DP58171 flatback 7/16” 1-5/8”-1-3/4” 2” 2.0 lbs.
IF points are formed from high-carbon, heat-treated steel with plated edges. All IF series points are5/16”thickmaterialandhavearadiusedbackattheboltholes.
Part # Bolt size Center Width Weight/eaIF10 7/16” 1-3/4” 1-1/2” 1.2lbs
IF10UB 7/16” 1-1/4”-2-1/4" 1-1/2” 1.2lbs
IF210 7/16” 1-3/4” 2” 1.5lbs
IF210UB 7/16” 1-1/4”-2-1/4” 2” 1.5lbs
IF110 7/16” 1-3/4” 2-1/2” 1.8lbs
IF110UB 7/16” 1-1/4”-2-1/4” 2-1/2” 1.8 lbs
IF310 7/16” 1-3/4” 3” 2.1 lb
Field Cultivator Sweeps, Points and Accessories
1-800-568-43919
WIH points are designed to fit Brillion IH and Vibro shank machines. WIH pointsare3/8” thick and are 15” long.
Part # Bolt size Center Width Weight/eaWIH2387 7/16” 1-1/2”-2-1/2” 2” 3.0lbs
WC/DF pointsareformedfrom13/4”widehigh-carbon,heat-treatedsteel.WC/DF points are 11” long.
Wiese McKay Empire Part # Part # Bolt size Center Thickness Weight/ea DF10UA 3/8” 1-5/8”-1-3/4” 1/4” 1.0 lbs
DF10UB 7/16” 1-5/8”-1-3/4” 1/4” 1.0 lbs
WC1343 DF010S 3/8” 1-5/8”-1-3/4” 5/16” 1.1 lbs
WC1347 DF010S-7 7/16” 1-5/8”-1-3/4” 5/16” 1.1 lbs
Spear pointsareformedfrom1/4”thickhigh-carbon,heat-treatedsteel.Thisisashovelwith a spear point nose and will move more dirt than the narrower points listed above. Ideal for improved soil mixing or incorporation applications.
Part # Bolt size Center Width Weight/ea24SP845 7/16” 1-3/4” 5” 1.5lbs
Field Cultivator Sweeps, Points and Accessories
1-800-568-439110
Dual Tillage Knives
Wiese dual tillage knives are designed to fit most field cultivators, allowing the farmer to apply fertilizer in one pass while preparing the seedbed. The DT3 is one of the heaviest field cultivator knives available today. Drop-forged and heat-treated, this knife will provide superior wear and added strength in the stem. The DT3 is an excellent choice in Rocky or tough conditions. Available plain or hard-faced. Plow bolts are not required. The DT4 thin-profile knife provides minimum soil disturbance whilesealingwellinmostsoilconditions.Thisknifeisdesignedusinga7/16”thicktwistedshank.TheDT41607 chrome insert version is recommended for most applications. The high-chrome alloy provides maximum wear on the foot and leading edge of the knife, making this knife a great value. The DT5isourmosteconomicalknife.Designedusing3/8”thickhigh-carbonsteel,thisknifeisformedwitha single point and heat-treated. Available plain or hard-faced.
Part # Profile Bolt size Center Pipe Weight/eaDT310 Wide 7/16”hexhead 1-3/4”-2” 3/8” 3.0lbs
DT311 Wide-hardsurfaced 7/16”hexhead 1-3/4”-2” 3/8” 3.5lbs
DT41007 Thin 7/16”plowhead 1-5/8”-2” 3/8” 2.7lbs
DT41107 Thin-hardsurfaced 7/16”plowhead 1-5/8”-2” 3/8” 3.0lbs
DT41607 Thin-chromeinsert 7/16”plowhead 1-5/8”-2” 3/8” 3.3lbs
DT50007 Wide 7/16”plowhead 1-3/4” n/a 1.7lbs
DT50107 Wide-hardsurfaced 7/16”plowhead 1-3/4” n/a 1.8lbs
Field Cultivator Shank Protector
Ultra high-density poly shank protectors are very easy to install because they are tapered at the bolt holes to fit the sweep stem. Shank protectors add years of life to your equipment, especially in abrasive soils. The poly material helps prevent wet, heavy soils from building up and clodding.
Part # Size Weight/ea2014134P 1/4”X1-7/8”X10” 0.3lbs
Row Crop Sweeps, Points and Reversible Blades
1-800-568-439111
Row crop sweeps
Row crop sweeps are designed for high-speed cultivation of growing crops. Wiese 4” through 10” sweeps are 6mm thick, high-carbon, heat-treated steel. 12” through 24” sweeps are 6.35mm thick, highcarbon,heat-treatedsteel.Allrowcropsweepshaveasquarecenterholefora5/8”carriagebolt.Some Allis Chalmers, Buffalo, Du-All and Forrest City field cultivators require row crop sweeps. Note:Halfsweepsareavailableuponrequest. McKay-EmpirePart # Part # Stem angle Bolt size Center Width Weight/ea1404 12-04 54˚ 7/16” 2” 4” 1.3lbs
1406 12-06 54˚ 7/16” 2” 6” 1.7lbs
1408 12-08 54˚ 7/16” 2” 8” 2.1lbs
1410 12-10 54˚ 7/16” 2” 10” 2.7lbs
1412 12-12 54˚ 7/16” 2” 12” 3.5lbs
1414 12-14 54˚ 7/16” 2” 14” 4.0lbs
1416 12-16 54˚ 7/16” 2” 16” 5.3lbs
1418 12-18 54˚ 7/16” 2” 18” 5.9lbs
1420 12-20 54˚ 7/16” 2” 20” 6.5lbs
1422 12-22 54˚ 7/16” 2” 22” 6.7lbs
1424 12-24 54˚ 7/16” 2” 24” 7.8lbs
1426 12-26 54˚ 7/16” 2” 26” 7.9lbs
1428 12-28 54˚ 7/16” 2” 28” 8.2lbs
1430 12-30 54˚ 7/16” 2” 30” 8.5lbs
Reversible blades
Reversible bladesforhigh-residuecultivatorsaremadefrom5/16”thick,high-carbon,heat-treatedsteel, designed to fit Hiniker, Kinze, Sukup, Krause, Wetherell, Buffalo and others. The cutting widths below are approximate averages based on the cutting width of the units, not the length of the blade.Note:Allbladesare3-1/2”wideanduseareversibleboltpatternon2-1/4”spacings.Thecut-ting edge is positioned the same as OEM blades using a 2” spacing.
Part # Bolt size Center Cutting width Weight/ea4111HRB 3/8” 3” 11” 2.8lbs
4112HRB 3/8” 3” 12” 3.0lbs
4114HRB 3/8” 8” 14” 3.3lbs
4117HRB 3/8” 8” 17” 4.2lbs
4119HRB 3/8” 8” 19” 4.7lbs
4121HRB 3/8” 8” 21” 5.1lbs
4123HRB 3/8” 8” 23” 6.5lbs
4125HRB 3/8” 8” 25” 6.8lbs
4127HRB 3/8” 8” 27” 7.3lbs
Middle worker points
Middle worker points are designed to break the ground between the rows and keep the cultivator engaged in the soil. All middle worker points are made from high-carbon steel with chrome alloy caps for durability and extended wear.
Part # Cap style Machine application Weight/ea41BMPH Flat Hiniker,Buffalo,Krause,andWetherell 2.8lbs
41WCP5 Eaglebeak Hiniker5000 1.8lbs
41WCP6 Eaglebeak Hiniker6000 2.0lbs
41BMPS Flat Sukup 2.9 lbs
Row Crop Sweeps, Points and Reversible Blades
1-800-568-439112
Row Crop Sweeps, Points and Reversible Blades
1-800-568-439113
Danish or “S” tine sweeps, clamps and shanksDanish or “S” tine sweeps are made from 6mm thick, high-carbon, heat-treated steel. These sweeps are designed to fit most row crop cultivators and some soil finishers using Danish or “S” tine shankswithone3/8”bolthole.Allnon-reversiblesweepsaremadewithabuilt-inboltprotector.
Part # Bolt size Style Width Weight/eaWK1 3/8”ellipticalhead reversible 1” 0.8lbs
WK42 3/8”ellipticalhead shovel 2-3/4” 1.0lbs
WK44D 3/8”ellipticalhead duckfoot 4” 1.2lbs
WK44 3/8”ellipticalhead shovel 4” 1.1lbs
WK47 3/8”ellipticalhead shovel 7” 1.5lbs
WK49 3/8”ellipticalhead shovel 9” 1.9lbs
7/16"boltholeand2-holepunchingsareavailablebyspecialorder.Minimumorderquantitymayapply.
Clamps for Danish “S” tine cultivators are designed to attach shanks to toolbars on row crop cultivators.
Part # Toolbar size Weight/ea27120822 2-1/2”square 1.5lbs
27120899 2” square .9 lbs
Shanks for Danish or “S” tine cultivators are made from spring steel designed to create a “vibra”actionforsuperiorweedcontrol.Thestandardshankis10mmthickness.Heavy-dutyand high-clearance shanks are 12mm thickness. Note:Standardandheavy-dutyshanksare14-1/2” workingclearance,andhigh-clearanceshanksare18-1/2”workingclearance.
Part # Toolbar size Clamp bolt size Sweep bolt size Shank type Weight/eaST3210 2” 1/2” 3/8” standard10mm 6.5lbs
ST3212 2” 1/2” 3/8” heavyduty12mm 7lbs
ST3212HC 2-1/2”-3” 1/2” 3/8” highclear12mm 8lbs
Row Crop Sweeps, Points and Reversible Blades
1-800-568-439114
Peanut sweeps
Peanut sweeps are made from high-carbon, heat-treated steel. The thickness is 4.75mm on 6” to 12” sweeps and 6mm on all others. Peanut sweeps are designed with a low crown and narrow wings and are used mostly for cultivation of vegetables or specialty crops.
Part # Stem angle Bolt size Center Width Weight/ea131-06 56˚ 7/16” 1-1/4”-2-1/4” 6” 1.2 lbs
131-08 56˚ 7/16” 1-1/4”-2-1/4” 8” 1.4 lbs
131-10 56˚ 7/16” 1-1/4”-2-1/4” 10” 2.0 lbs
131-12 56˚ 7/16” 1-1/4”-2-1/4” 12” 2.3 lbs
132-14 56˚ 7/16” 1-1/4”-2-1/4” 14” 3.0 lbs
132-16 56˚ 7/16” 1-1/4”-2-1/4” 16” 3.3 lbs
132-18 56˚ 7/16” 1-1/4”-2-1/4” 18” 3.6 lbs
Bedding/Joyce sweeps
Bedding/Joyce sweeps are made from high-carbon, heat-treated steel 6mm in thickness. The wide wings and narrow shank are designed for maximum wear and cutting out the middles in row crop appli-cations. All Bedding/Joyce sweepshaveasquarecenterholefora5/8”carriagebolt.
Part # Stem angle Bolt size Center Width Weight/ea112-08 54˚ 7/16” 2-1/4” 8” 2.2lbs
112-10 54˚ 7/16” 2-1/4” 10” 2.7lbs
112-12 54˚ 7/16” 2-1/4” 12” 3.2lbs
112-14 54˚ 7/16” 2-1/4” 14” 5.5lbs
112-16 54˚ 7/16” 2-1/4” 16” 6.2lbs
112-18 54˚ 7/16” 2-1/4” 18” 7.1lbs
112-20 54˚ 7/16” 2-1/4” 20” 8.3lbs
112-22 54˚ 7/16” 2-1/4” 22” 8.9lbs
112-24 54˚ 7/16” 2-1/4” 24” 10.4lbs
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439115
Conservation sweeps
Conservation sweeps are designed with a low crown and low-rise wings for less surface disturbance and maximum undercutting. All conservation sweeps are formed from high-carbon, heat-treated steel. Available plain, top hard-surfaced or bottom hard-surfaced. These sweeps will fit John Deere, Kent, Sunflower, Quinstar, Baker and other minimum tillage or mulch type machines.
Part # Stem angle Bolt size Center Thickness Width Weight/eaVHC27C2 50˚ 1/2” 2-1/4” 5/16” 27” 15lbs
Chisel spikes
The drop-forged design of Wiese chisel spikes provides several advantages over other brands or OEM points that are not drop-forged. The extra material at the point makes these chisel spikes some of the most durable and longest-wearing points on the market. The exclusive design provides a self-sharp-ening point for superior penetration throughout the life of the point. SD series points are punched for regular hex head bolts for extra wear and ease of removal except where noted.
Part # Bolt size Center Thickness Length Width Weight/eaC2585** 1/2”plowhead 2-1/4” 5/8’ 16-3/4” 2” 5 lbs
R2585 1/2”plowhead 2-1/4” 5/8” 17-1/2” 2” 5.25 lbs
SD225 1/2”hexhead 2-1/4”-2-1/2” 7/8” 19-1/2” 2” 8lbs
SD22-H* 1/2”plowhead 2-1/4”-2-1/2” 7/8’ 19-1/2” 2” 8 lbs
SD227 7/16”plowhead 2-1/4”-2-1/2” 7/8” 19-1/2” 2” 8lbs
HD88** 1/2”hexhead 2-1/4”-2-1/2” 1” 18” 2” 9 lbs
SD235 1/2”hexhead 2-1/4”-2-1/2” 1” 20” 2-1/2” 12lbs
47345*** 1/2”plowhead 2-1/4”-2-1/2” 3/4” 13-1/2” 2-1/4” 6.25lbs
CI345 Replacement cap for 47345 0.7 lbs
*RecommendedforIH,Wil-Richandlowclearanceshanks**Press formed (not drop-forged)***Single-ended spike with high-chrome alloy point
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439116
Twisted chisel spikes
Twisted chisel spikes are designed to be used in place of straight chisel spikes to turn soil or incorporate residue for maximum weed kill. All twisted chisel spikes are formed from high-carbon, heat-treated steel. CC series part #’s are slash point style.Note:Aspecialboltwitha1/2”#3plowheadanda7/16”threadedbodymaybeusedonchiselplowsrequiringa7/16”shankhole.IHC chisel plowshaveslottedshankholestoacceptspikeswith2-1/4”centers.
Part # Twist Bolt size Center Thickness Length Width Weight/ea320-6LKS LH 1/2” 2-1/4”-2-1/2" 3/8” 20” 3” 6.25lbs
320-6RKS RH 1/2” 2-1/4”-2-1/2" 3/8’ 20” 3” 6.25 lbs
1235L5 LH 1/2” 2-1/4” 1/2” 23” 3” 8.5 lbs
1235R5 RH 1/2” 2-1/4” 1/2” 23” 3” 8.5 lbs
CC1235L LH 1/2” 2-1/4”-2-1/2" 1/2” 23” 3” 10 lbs
CC1235R RH 1/2” 2-1/4”-2-1/2" 1/2” 23” 3” 10 lbs
1245L LH 1/2” 2-1/4”-2-1/2" 1/2” 23” 4” 11.3 lbs
1245R RH 1/2” 2-1/4”-2-1/2" 1/2” 23” 4” 11.3 lbs
CC1245L LH 1/2” 2-1/4” 1/2” 26” 4” 12.5 lbs
CC1245R RH 1/2” 2-1/4” 1/2” 26” 4” 12.5 lbs
Reversible chisel plow shovels
Reversible chisel plow shovels are designed to be used in place of spikes when more soilmovement and ridging are desired. Ours are formed from high-carbon, heat-treated steel.
Part # Bolt size Center Thickness Length Width Weight/ea45163M 1/2” 2-1/4” 3/8" 16” 4-1/2” 6.2 lbs
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439117
Three-piece chisel parts
Three-piece chisel parts are designed for OEM replacement on coulter chisel machines. With the use of the “frog,” three-piece components may also be used on conventional chisel plows. This system lets you replace the point separate from the moldboard, and the moldboard is reversible. These parts will fit Glencoe Soil Saver, Landoll, Bush Hog, Deutz-Allis, DMI, Krause, Kent, Brillion, Kelley, Steiger and other coulter chisels. Moldboards and points are available plain or hard-surfaced.
Part # Bolt size Description Thickness Width Weight/eaCPFL 1/2” Chiselplowfrogleft N/A N/A 3.5lbs
CPFR 1/2” Chisel plow frog right N/A N/A 3.5 lbs
CPPL 1/2” Chiselplowpointleft 3/8"* 4” 2.5 lbs
CPPR 1/2” Chisel plow point right 3/8"* 4” 2.5 lbs
CPML 1/2” Chiselplowmoldboardleft 3/8" 4” 7.0 lbs
CPMR 1/2” Chisel plow moldboard right 3/8" 4” 7.0 lbs
*Drop-forged (approximate nominal thickness)
Undercutter blades
Plains plow blades to fit Kent/Orthman are designed for plains plows and undercut type plows using9-1/2”boltspacing.Theyareavailableinlow-profileorhigh-profilestyles.Pleaserefertothesteel size listed below.
Part # Cut/style Hard-surface Hole space #holes Steel size Weight/ea45648KT 48” low profile Top 9-1/2” 4 4-1/2”X11/32” 41lbs
62548KT 48” high profile Top 9-1/2” 4 6-1/2”X5/16” 45lbs Laser plow blades are designed to fit Quinstar/Landollandundercuttypeplowsusing7-1/2”boltspacing. Part # Cut/style Hard-surface Hole space #holes Steel size Weight/ea62540QT 40” high profile Top 7-1/2” 5 6-1/2”X5/16” 37lbs
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439118
One-piece sweeps to fit Noble and Sunflower plows
One-piece sweeps are designed to fit Noble, Sunflower and other undercut style plows using 10” boltspaces.Availableplainorwithtoporbottomhard-surfacing.Hardfacedsweepshaveadditionalhardfacingonthepointtomaintaingoodpenetration.Allbladesaremadefrom6-1/2"x5/16"highcar-bon steel.
75˚ bladesPart # Cut Hard-surface Hole space #holes Blade length Weight/ea2050P 5’ No (3)10”-(1)5” 5 50” 43lbs
3050T 5’ Top (3)10” - (1)5” 5 50” 50 lbs
4050B 5’ Bottom (3)10”-(1)5” 5 50” 49 lbs
2055P 5-1/2’ No (3)10” - (2)5” 6 54” 43 lbs
3055T 5-1/2’ Top (3)10”-(2)5” 6 54” 54lbs
4055B 5-1/2’ Bottom (3)10”-(2)5” 6 54” 52lbs
2060P 6’ No (4)10”-(2)5” 7 60” 58lbs
3060T 6’ Top (4)10”-(2)5” 7 60” 62lbs
4060B 6’ Bottom (4)10”-(2)5” 7 60” 62lbs
3065T 6-1/2’ Top (4)10”-(3)5” 8 65” 65lbs
4065B 6-1/2’ Bottom (4)10”-(3)5” 8 65” 62lbs
3070T 7’ Top (4)10”-(3)5” 8 69” 66lbs
100˚ bladesPart # Cut Hard-surface Hole space #holes Blade length Weight/ea2150P 5’ No (2)10”-(2)5” 5 40” 38lbs
3150T 5’ Top (2)10” - (2)5” 5 40” 40 lbs
2155P 5-1/2’ No (2)10” - (3)5” 6 43-1/4” 43lbs
3155T 5-1/2’ Top (2)10” - (3)5” 6 43-1/4” 44lbs
2160P 6’ No (3)10”-(2)5” 6 48” 48lbs
3160T 6’ Top (3)10”-(2)5” 6 48” 52lbs
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439119
Chisel plow/wheatland sweeps
Chisel plow/wheatland sweeps are designed to be used on chisel plows in place of chisel spikes for more soil shattering action and wider cut between the shanks. Dart sweeps have a needle point nose to maintain a sharp point throughout the life of the sweep. Flange sweeps have a flattened wing that reduces soil boiling and blowout and increases the strength. Parallel wing sweeps main-tain the same cutting width throughout the life of the sweep. Some models incorporate multiple features to allow you to choose the perfect sweep for conditions. All chisel plow/wheatland sweeps are formed from boron, heat-treated steel.
Low crown - 50° stem angle, 2-1/4" centersPart # Special feature(s) Bolt size Thickness Width Weight/eaXD50-7K Dart 1/2” 1/4” 7” 4.17 lbs
XD50-10K Dart 1/2” 1/4” 10” 4.63 lbs
XD50-12K Dart 1/2” 1/4” 12” 5.04 lbs
XD50-14K Dart 1/2” 1/4” 14” 5.82 lbs
X50-16K 1/2” 1/4” 16” 7.04 lbs
XD50-16 Dart 7/16” 1/4” 16” 6.45 lbs
XD50-16K Dart 1/2” 1/4” 16” 6.45 lbs
X50-18K 1/2” 1/4” 18” 8.25 lbs
X50-18-5K 1/2” 5/16” 18” 9.02 lbs
XD50-18 Dart 7/16” 1/4” 18” 7.45 lbs
XD50-18K Dart 1/2” 1/4” 18” 7.45 lbs
X50-20K 1/2” 1/4” 20” 6.8 lbs
XD50-20K Dart 1/2” 1/4” 20” 6.8 lbs
X50-22K 1/2” 1/4” 22” 7.4 lbs
XD50-22K Dart 1/2” 1/4” 22” 7.4 lbs
X50-24K 1/2” 1/4” 24” 8.1 lbs
XD50-24K Dart 1/2” 1/4” 24” 8.1 lbs
Chisel Plow Sweeps, Shovels, Points and Blades
1-800-568-439120
Chisel plow/wheatland sweeps continued
Medium crown - 43° stem angle
Part # Special feature(s) Bolt size Center Thickness Width Weight/ea43-8K 1/2” 2-1/4” 1/4” 8” 4.55 lbs
43-8S 1/2” 2-1/4”-2-1/2" 1/4” 8” 4.58 lbs
D43-8S Dart 1/2” 2-1/4”-2-1/2" 1/4” 8” 4.58 lbs
43-10K 1/2” 2-1/4” 1/4” 10” 5.11 lbs
43-10S 1/2” 2-1/4”-2-1/2" 1/4” 10” 5.17 lbs
D43-10S Dart 1/2” 2-1/4”-2-1/2" 1/4” 10” 5.18 lbs
43-12I 1/2” 2-1/2” 1/4” 12” 5.44 lbs
43-12K 1/2” 2-1/4” 1/4” 12” 5.44 lbs
43-12S 1/2” 2-1/4”-2-1/2" 1/4” 12” 5.54 lbs
D43-12S Dart 1/2” 2-1/4”-2-1/2" 1/4” 12” 5.44 lbs
F43-14I Flange 1/2” 2-1/2" 1/4” 14” 6.68 lbs
F43-14K Flange 1/2” 2-1/4" 1/4” 14” 6.68 lbs
F43-14S Flange 1/2” 2-1/4”-2-1/2" 1/4” 14” 6.68 lbs
FD43-14S Dart,Flange 1/2” 2-1/4”-2-1/2" 1/4” 14” 6.67 lbs
FD43-14SPW Dart,Flange,ParallelWing 1/2” 2-1/4”-2-1/2" 1/4” 14” 7.73 lbs
F43-16 Flange 7/16” 2-1/4" 1/4” 16” 7.04 lbs
F43-16I Flange 1/2” 2-1/2" 1/4” 16” 7.04 lbs
F43-16K Flange 1/2” 2-1/4" 1/4” 16” 7.04 lbs
F43-16S Flange 1/2” 2-1/4”-2-1/2" 1/4” 16” 7.04 lbs
FD43-16S Dart,Flange 1/2” 2-1/4”-2-1/2" 1/4” 16” 7.05 lbs
FD43-16SPW Dart,Flange,ParallelWing 1/2” 2-1/4”-2-1/2" 1/4” 16” 8.53 lbs
F43-18I Flange 1/2” 2-1/2" 1/4” 18” 8.25 lbs
F43-18K Flange 1/2” 2-1/4" 1/4” 18” 8.25 lbs
F43-18S Flange 1/2” 2-1/4”-2-1/2" 1/4” 18” 8.25 lbs
FD43-18S Dart,Flange 1/2” 2-1/4”-2-1/2" 1/4” 18” 8.25 lbs
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
Chisel plow/wheatland sweeps continued
Medium crown - 47° stem angle
Part # Special feature(s) Bolt size Center Thickness Width Weight/eaD47-12K Dart 1/2” 2-1/4” 1/4” 12” 5.54 lbs
D47-12S Dart 1/2” 2-1/4"-2-1/2" 1/4” 12” 5.54 lbs
F47-14K Flange 1/2” 2-1/4" 1/4” 14” 6.68 lbs
FD47-14K Dart,Flange 1/2” 2-1/4” 1/4” 14” 6.68 lbs
F47-16K Flange 1/2” 2-1/4" 1/4” 16” 7.04 lbs
F47-16-5K Flange 1/2” 2-1/4" 5/16” 16” 8.68 lbs
F47-16KPW Flange,ParallelWing 1/2” 2-1/4” 1/4” 16” 8.53 lbs
FD47-16K Dart,Flange 1/2” 2-1/4” 1/4” 16” 7.25 lbs
FD47-16KPW Dart,Flange,ParallelWing 1/2” 2-1/4” 1/4” 16” 8.53 lbs
F47-18K Flange 1/2” 2-1/4" 1/4” 18” 8.25 lbs
FD47-18K Dart,Flange 1/2” 2-1/4” 1/4” 18” 8.25 lbs
Medium crown - 50° stem angle
Part # Special feature(s) Bolt size Center Thickness Width Weight/ea50-6K 1/2” 2-1/4” 1/4” 6” 4.59 lbs
50-8K 1/2” 2-1/4” 1/4” 8” 4.55 lbs
50-8-5K 1/2” 2-1/4” 5/16” 8” 4.9 lbs
D50-8K Dart 1/2” 2-1/4” 1/4” 8” 4.59 lbs
D50-8-5KP Dart,ParallelWing 1/2” 2-1/4” 5/16” 8” 5.6 lbs
50-10K 1/2” 2-1/4” 1/4” 10” 5.11 lbs
D50-10K Dart 1/2” 2-1/4” 1/4” 10” 5.18 lbs
50-12K 1/2” 2-1/4” 1/4” 12” 5.44 lbs
50-12-5K 1/2” 2-1/4” 5/16” 12” 6.63 lbs
FD50-12KPW Dart,Flang,ParallelWing 1/2” 2-1/4” 1/4” 12” 6.31 lbs
FD50-12-5KP Dart,Flange,ParallelWing 1/2” 2-1/4” 5/16” 12” 8.23 lbs
F50-14K Flange 1/2” 2-1/4" 1/4” 14” 6.68 lbs
21
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
Chisel plow/wheatland sweeps continued
Medium crown - 50° stem angle
Part # Special feature(s) Bolt size Center Thickness Width Weight/eaF50-14-5K Flange 1/2” 2-1/4" 5/16” 14” 7.64 lbs
FD50-14K Dart,Flange 1/2” 2-1/4” 1/4” 14” 6.68 lbs
FD50-14-5K Dart,Flange 1/2” 2-1/4” 5/16” 14” 7.64 lbs
FD50-14KPW Dart,Flange,ParallelWing 1/2” 2-1/4” 1/4” 14” 7.73 lbs
FD50-14-5KP Dart,Flange,ParallelWing 1/2” 2-1/4” 5/16” 14” 9.55 lbs
F50-16 Flange 7/16” 2-1/4" 1/4” 16” 7.04 lbs
F50-16K Flange 1/2” 2-1/4" 1/4” 16” 7.04 lbs
F50-16-5K Flange 1/2” 2-1/4" 5/16” 16” 8.68 lbs
FD50-16K Dart,Flange 1/2” 2-1/4" 1/4” 16” 7.25 lbs
FD50-16-5K Dart,Flange 1/2” 2-1/4" 5/16” 16” 9.05 lbs
FD50-16KPW Dart,Flange,ParallelWing 1/2” 2-1/4” 1/4” 16” 8.53 lbs
FD50-16-5KP Dart,Flange,ParallelWing 1/2” 2-1/4” 5/16” 16” 10.06 lbs
F50-18K Flange 1/2” 2-1/4" 1/4” 18” 8.25 lbs
F50-18-5K Flange 1/2” 2-1/4" 5/16” 18” 9.3 lbs
FD50-18 Dart,Flange 7/16” 2-1/4” 1/4” 18” 8.25 lbs
FD50-18K Dart,Flange 1/2” 2-1/4” 1/4” 18” 8.25 lbs
FD50-18-5K Dart,Flange 1/2” 2-1/4” 5/16” 18” 10.0 lbs
FD50-18-5KP Dart,Flange,ParallelWing 1/2” 2-1/4” 5/16” 18” 14.0 lbs Medium crown - 54° stem angle
Part # Special feature(s) Bolt size Center Thickness Width Weight/eaFD54-16M Dart,Flange 7/16” 2-1/4” 1/4” 16” 7.25 lbs
22
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
McKay Empire Penetrator sweeps
McKay Empire Penetrator sweeps are uniquely designed to provide superior penetration and wear in hard soil zones. The patented design of the Penetrator sweep features 70% of the cutting edge inclined to a 30° angle. University tests have shown that the Penetrator requires 35-50% less force to penetrate than conventional chisel sweeps. The inclined cutting edge and flanged wing also provide more strength and breakage resistance when compared to conventional chisel sweeps. Parallel wing sweeps maintain the same cutting width throughout the life of the sweep. All Penetrator sweeps are formed from boron, heat-treated steel. Full drum quantities available upon request.
43° stem angle, 2-1/4" centersPart # Special feature(s) Bolt size Thickness Width Weight/eaP43-8K 1/2” 1/4” 8” 4.59 lbs
P43-8-5K 1/2” 5/16” 8” 5.65 lbs
P43-8-5KP ParallelWing 1/2” 5/16” 8” 5.6 lbs
P43-10K 1/2” 1/4” 10” 5.18 lbs
P43-10-5K 1/2” 5/16” 10” 7.54 lbs
P43-12KPW ParallelWing 1/2” 1/4” 12” 6.38 lbs
P43-12-5KP ParallelWing 1/2” 5/16” 12” 9.0 lbs
P43-14K 1/2” 1/4” 14” 6.68 lbs
P43-14KPW ParallelWing 1/2” 1/4” 14” 7.73 lbs
P43-16K 1/2” 1/4” 16” 6.95 lbs
P43-16-5K 1/2” 5/16” 16” 8.9 lbs
P43-16KPW ParallelWing 1/2” 1/4” 16” 8.53 lbs
P43-16-5KP ParallelWing 1/2” 5/16” 16” 9.9 lbs
P43-18K 1/2” 1/4” 18” 8.25 lbs
P43-20K 1/2” 1/4” 20” 9.23 lbs
P43-22K 1/2” 1/4” 22” 10.2 lbs
P43-24K 1/2” 1/4” 24” 11.17 lbs
P43-26K 1/2” 1/4” 26” 12.19 lbs
P43-28K 1/2” 1/4” 28” 13.13 lbs
23
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
McKay Empire Penetrator sweeps continued
50° stem angle, 2-1/4" centersPart # Special feature(s) Bolt size Thickness Width Weight/eaP50-6K 1/2” 1/4” 6” 4.59 lbs
P50-8K 1/2” 1/4” 8” 4.59 lbs
P50-8-5K 1/2” 5/16” 8” 5.65 lbs
P50-8-5KP ParallelWing 1/2” 5/16” 8” 5.6 lbs
P50-10K 1/2” 1/4” 10” 5.18 lbs
P50-10-5K 1/2” 5/16” 10” 7.54 lbs
P50-10-5KP ParallelWing 1/2” 5/16” 10” 8.5 lbs
P50-12KPW ParallelWing 1/2” 1/4” 12” 6.38 lbs
P50-12-5KP ParallelWing 1/2” 5/16” 12” 9.0 lbs
P50-14K 1/2” 1/4” 14” 6.68 lbs
P50-14-5K 1/2” 5/16” 14” 7.71 lbs
P50-14KPW ParallelWing 1/2” 1/4” 14” 7.73 lbs
P50-14-5KP ParallelWing 1/2” 1/4” 14” 9.53 lbs
P50-16K 1/2” 1/4” 16” 6.95 lbs
P50-16-5K 1/2” 5/16” 16” 8.9 lbs
P50-16KPW ParallelWing 1/2” 1/4” 16” 8.53 lbs
P50-16-5KP ParallelWing 1/2” 5/16” 16” 9.9 lbs
P50-18K 1/2” 1/4” 18” 8.25 lbs
P50-18-5K 1/2” 5/16” 18” 10.06 lbs
P50-20K 1/2” 1/4” 20” 9.23 lbs
P50-22K 1/2” 1/4” 22” 10.2 lbs
P50-24K 1/2” 1/4” 24” 11.17 lbs
P50-26K 1/2” 1/4” 26” 12.19 lbs
P50-28K 1/2” 1/4” 28” 13.13 lbs
24
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
McKay Empire Slimwedge™ to fit Chisel Plows
McKay Empire Slimwedge sweeps provide a wide variety of sweep and opener options along with a quick change-over method. Bolt the clip and spring onto the chisel shank and then drive on the sweep until the spring pops through the mounting hole. Release the sweep by compressing the spring and striking the top of the stem. A Retainer Release Tool (RRT-1) is available to assist with removal.Availablein1/4"or5/16"heat-treatedsteel.
Part # Bolt size Center Weight/eaSW50-36L AdaptorClip 1/2" 2-1/4" 1.1lbs
SWR-1 Spring Retainer
Part # Thickness Width Weight/eaSW14-12 1/4" 12” 5.77lbs
SW516-12 5/16" 12" 6.67lbs
SW14-14 1/4" 14" 6.42lbs
SW516-14 5/16" 14" 8.0lbs
SW14-16 1/4" 16" 7.88lbs
These Spikes, Openers, and Tips show the versatility of the Slimwedge system. Quickly switch from sweeps to spikes to direct seeding without having to remove bolts.
Part # Description Width Weight/eaSWS-02 5/8"thicksingleendedspike 2” 4.0lbs
SW14-01A Slimwedge opener bracket 2.1 lbs
SW14-01AF Slimwedge opener bracket with seed boot 2.56 lbs
SWT-02FC NiHardtipwithcarbide 2" 1.9lbs
SWT-03FC NiHardtipwithcarbide 3" 2.4lbs
25
Chisel Plow Sweeps, Shovels , Points and Blades
1-800-568-4391
Chisel Plow Knives
Wiese chisel plow knives are designed to fit most chisel plows, allowing the farmer to apply fertilizer in one pass while chiseling after harvest. The CP65 has a wide foot with a relatively narrow stem to minimize surface disturbance. Drop-forged and heat-treated, this knife also wraps around the chisel shank to prevent twisting. It is available plain or hard-faced. The CP70 is a thin profile twisted shank knife. The forged carbon steel knife is available plain or hard-faced. A chrome footed version is also available for extremely abrasive conditions. The CP90 twistedshankknifefeatures3/4"thicksteeland a replaceable chrome foot to battle even the toughest conditions. All of these knives are available with3/8"or1/2"ODcrimpedendpipe.Limiteddualtubeoptionsarealsoavailable.
Part # Profile Bolt size Center Pipe Weight/eaCP6510(20) Wide 1/2”hexhead 2-1/4”-2-1/2” 3/8”(1/2") 5.0lbs
CP6511(21) Wide-hardsurfaced 1/2”hexhead 2-1/4”-2-1/2” 3/8”(1/2") 6.0lbs
CP7010(20) 1/2"twist 1/2”plowhead 2-1/4" 3/8”(1/2") 5.0lbs
CP7011(21) 1/2"twist-hardsurfaced1/2”plowhead 2-1/4" 3/8”(1/2") 6.0lbs
CP7015(25) 1/2"twist-chrome 1/2”plowhead 2-1/4" 3/8”(1/2") 6.0lbs
CP9015(25) 3/4"twist-chrome 1/2”plowhead 2-1/4" 3/8”(1/2") 7.9lbs
761573 Replacement chrome insert for CP90 3.2 lbs
BRP12114 Roll pin for 761573 0.1 lbs
Chisel Plow Shank Protector
Ultra high-density poly shank protectors add years of life to your equipment, especially in abrasive soils. The poly material helps prevent wet, heavy soils from building up and clodding.
Part # Size Weight/ea2614120P 1/4”X2”X14” 0.32lbs
26
Subsoiler Points and Accessories
1-800-568-439127
Booted points to fit most popular subsoilers Wiese subsoiler points are made using high-quality components, starting with a 1" thick high car-bon, heat treated base. Combine that with a formed mounting boot, a wide array of high chrome wear caps, and either 7" or 10" hardfaced wings to create the right tool for soil conditions. Points to fit DMI, Case-DMI, JD (except JD2700 w/round edge shanks), Krause, Salford, Great Plains (requires 41GP001 wear shin retainer) and others
Part # Point size Standard cap Shank size Wing width Pin/bolt Weight/ea.41BDMI211442 2”X10” Footedbump 1-1/4” No wing Included 15.5 lbs
41BDMI711441 2”X10” Footed fin 1-1/4” 7” Included 19.6 lbs
41BDMI711442 2”X10” Footed bump 1-1/4” 7” Included 19.5 lbs
41BDMI011441 2”X10” Footed fin 1-1/4” 10” Included 23.0 lbs
41BDMI011442 2”X10” Footed bump 1-1/4” 10” Included 22.5 lbs
41BDMI211241 2”X12” Footed fin 1-1/2” No wing 19.2 lbs
41BDMI211242 2”X12” Footedbump 1-1/2” No wing 18.8 lbs
41BDMI711242 2”X12” Footed bump 1-1/2" 7” 20.0 lbs
41BDMI011242 2”X12” Footed bump 1-1/2” 10” 25.0 lbs
Booted points to fit IH #10, #11, #14 and others
Part # Point size Standard cap Shank size Weight/ea.41B2508IH 2-1/2”X8” None 1-1/4” 8 lbs
41B2508IHC 2-1/2”X8” 3” 1-1/4” 8.3 lbs
41B2508IHS 2-1/2”X8” 6” 1-1/4” 9.2 lbs
Subsoiler Points and Accessories
1-800-568-439128
Points to fit John Deere 510, 912, 915, 2700 series, Krause Dominator, Glencoe
Part # Point size Standard cap Shank size Wing width Weight/ea.41B2512JD 2-1/2”X12” None 1-1/4” N/A 9lbs
41B2512JDC 2-1/2”X12” 3” 1-1/4” N/A 9.9 lbs
41B2512JDS 2-1/2”X12” 6” 1-1/4” N/A 11.2 lbs
41B2510JDKW7 2-1/2”X10” Footed bump 1-1/4” 7” 19.1 lbs
41B2510JDKW0 2-1/2”X10” Footed bump 1-1/4” 10” 21.2 lbs
Points to fit M&W and Sunflower equipment
Part # Point size Standard cap Shank size Wing width Weight/ea.41B2512SFMW 2-1/2”X12” None 1-1/4” N/A 9lbs
41B2512SFMWC 2-1/2”X12” 3” 1-1/4” N/A 9.9 lbs
41B2512SFMWS 2-1/2”X12” 6” 1-1/4” N/A 11.2 lbs
41B2512SFMWF 2-1/2”X12” Footed bump 1-1/4” N/A 13 lbs
41B2512SFMWA 2-1/2”X12” Footed fin 1-1/4” N/A 14 lbs
41B2512SFMWW7 2-1/2”X12” Footed bump 1-1/4” 7” 19.2 lbs
41B2512SFMWW0 2-1/2”X12” Footed bump 1-1/4” 10” 21 lbs
41B2512MWF* 2-1/2”X12” Footed bump 1-1/4” N/A 14 lbs
41B2512MWFW7* 2-1/2”X12” Footed bump 1-1/4” 7” 19.2 lbs*Recommended for M&W parabolic shanks using heavy cast wear guard
Subsoiler Points and Accessories
1-800-568-439129
Points to fit Brillion equipment
Part # Point size Standard cap Shank size Wing width Weight/ea.41B2512B 2-1/2”X12” None 1” N/A 9lbs
41B2512BC 2-1/2”X12” 3” 1” N/A 10.3 lbs
41B2512BS 2-1/2”X12” 6” 1” N/A 11.5 lbs
41B2512BW7 2-1/2”X12” Footed bump 1” 7” 19.6 lbs
41B2512B2 2-1/2”X12” None 1-1/4” N/A 9.8 lbs
41B2512B2C 2-1/2”X12” 3” 1-1/4” N/A 10.5 lbs
41B2512B2S 2-1/2”X12” 6” 1-1/4” N/A 11.7 lbs
41B2512B2F 2-1/2”X12” Footed bump 1-1/4” N/A 15 lbs
41B2512B2A 2-1/2”X12” Footed fin 1-1/4” N/A 17.6 lbs
41B2512B2W7 2-1/2”X12” Footed bump 1-1/4” 7” 19.5 lbs
41B2512B2W0 2-1/2”X12” Footed bump 1-1/4” 10” 22 lbs
Note:TheB2seriespart#’saredesignedtofitLandCommandermachineswiththeflatsteelshankprotector
Cover boards to fit DMI and Case New Holland
Part # Bolt size Centers Thickness Width Weight/ea.42404 7/16” 1-1/4”to2-1/4” 3/8" 4” 5.5lbs
42406 7/16” 1-1/4”to2-1/4” 6mm 6” 4.2lbs
42408 7/16” 1-1/4”to2-1/4” 6mm 8” 5.6 lbs
Subsoiler Points and Accessories
1-800-568-439130
Booted points to fit other short line subsoilers
Part # Point size Cap Shank size OEM Weight/ea.41B1511BR 2-1/2”X12” None 1" Brown 6.3lbs
41B1511BRC 2-1/2”X12” 3” 1" Brown 7 lbs
41B2509BH 2-1/2”X9” None 1-1/4" BushHog 7 lbs
41B2509BHC 2-1/2”X9” 3” 1-1/4" BushHog 7.5 lbs
41B2008FC 2-1/2”X12” None Forest City 6.5 lbs
41B2008FCC 2-1/2”X12” 3” Forest City 7 lbs
41B1511K1 1-3/4”X11” N/A 1" Kelly 6.3 lbs
41B1511K1S 1-3/4”X11” 6” 1" Kelly 7.1 lbs
41B1511K3 1-3/4”X11” N/A 3/4” Kelly/Unverferth 7.2 lbs
41B1511K3S 1-3/4”X11” 6” 3/4” Kelly/Unverferth 7.9 lbs
41B251234CPC 2-1/2”X12-3/4” None 1-1/4" Unverferth/Brent 12lbs
41B251234CPCW7 2-1/2”X12-3/4” Footedbump,7"wing 1-1/4" Unverferth/Brent 22.5lbs
41B2510PT 2-1/2”X10” None 1-1/4" Pittsburgh 8 lbs
41B2510PTC 2-1/2”X10” 3" 1-1/4" Pittsburgh 8.9 lbs
41B2509BH 2-1/2”X9” None 1-1/4" BushHog 7 lbs
41B2509BHC 2-1/2”X9” 3” 1-1/4" BushHog 7.5 lbs
41B2010WA2 2”X10” None 1-1/4" W&A 6.5 lbs
41B2010WA2C 2”X10” 3” 1-1/4" W&A 7 lbs
41B2013Y 2"X13" N/A Yetter/Orthman 7 lbs
41B2013YC 2"X13" 3” Yetter/Orthman 7.5 lbs
Note: Othercap/wingconfigurationsmaybeavailableonselectpoints.
Subsoiler Points and Accessories
1-800-568-439131
Points and parts to fit minimum-till subsoilersParts listed below are designed to fit minimum-till subsoilers or straight-line rippers. All are cast from high-chrome alloy material.
Part # Make/model Description Weight/ea.TF801400 Blu-Jet Sub tiller II Fall point 16 lbs
TF801300 Blu-Jet Sub tiller II Spring point 9 lbs
TF801600 Blu-Jet Sub tiller II Shin guard 14.5 lbs
Bolt on points to fit flat shank subsoilersBolt on points are designed to fit machines with flat-ended shanks. All parts listed below are formed from high-carbon, heat-treated steel.
Part # Make/model Bolt size Point size Center Weight/ea.412514BJC* Blu-Jet 5/8”Hex 1”X2-1/2”X14” 3” 9.6lbs
412013JD Case,Landoll,JohnDeere 1/2”PH 1”X2”X13” 3” 6.7lbs
412013JDC* Case,Landoll,JohnDeere 1/2”PH 1”X2”X13” 3” 7.5lbs
412512JD JohnDeere 1/2”Hex 1”X2-1/2”X12” 3” 8.5lbs
412512JDC* JohnDeere 1/2”Hex 1”X2-1/2”X12” 3” 8.8lbs
4121013T Taylor/Pittsburgh 5/8”Hex 1”X2”X13” 3-1/2” 7lbs
412512L Lilliston 1/2”Hex 1”X2-1/2”X12” 2-1/4” 8.5lbs
48010014** Brillion,Landoll,Tebben 5/8”PH 3/4”X2-1/4”X17-1/4” 2-1/4” 10lbs
* 3” chrome wear cap applied** Reversible
Subsoiler Points and Accessories
1-800-568-439132
Chrome accessoriesChrome shank protectors are weld-on chrome alloy segments to protect or rebuild shanks. They are available flat or round-front style.
Part # Description Shank width Weight/ea. 761714 1-5/8”X14”flat 1-1/4” 2.5lbs
761687 1-3/8”X14”round 1” 2.4lbs
762192 1-5/8”X14”round 1-1/4” 2.7lbs
761688 1-7/8”X14”round 1-1/2” 2.9lbs
761689 2-3/8”X14”round 2” 3.8lbs
761689 2-3/8”X14”round 2” 3.8lbs Bulk chrome wear caps are weld-on chrome alloy flat caps designed to extend the life of subsoiler points or other ground engaging components.
Part # Description Size Weight/ea. 761238 3"captofit2"widepoint 3/8"X2-3/8"X3" 11oz
761278 3"captofit2-1/2"widepoint 3/8"X2-7/8"X3" 14.3oz
762256 6"captofit2-1/2"widepoint 3/8"X2-7/8"X6" 1.5lbs
Disc Blades
1-800-568-439133
Precision double-bevel edge disc blades
Wiese disc blades are manufactured using a high-quality alloy containing a small amount of boron. The boron alloy allows the blade to flex when striking an obstruction and return to its original shape, greatly reducing breakage or bending. Our press-formed, double-bevel edge is designed to self-sharp-en as the disc wears, eliminating the need to roll or sharpen the blades. Diameter and thickness are specifiedinthetablebelow.PleaserefertothecenterholetableonpageXXtocompletethepartnum-ber. Simply add the desired center hole suffix to the part number to specify the arbor hole dimension. Sharpening or rolling standard Wiese disc blades will void the warranty. Rerollable blades are available by special order.
Plain edge disc blades
Part # Diameter Thickness Gauge MM Concavity Weight/ea.P1409 14” .138” 9 3.5 mm 1.50” 5.2 lbs
P1611 16” .118” 11 3 mm 1.50” 7.1 lbs
P1810 18” .128” 10 3.25 mm 1.75” 9.5 lbs
P1808 18” .157” 8 4 mm 1.75” 8.7 lbs
P2009 20” .138” 9 3.5 mm 2” 12.8 lbs
P2007 20” .177” 7 4.5 mm 2” 16.3 lbs
P2207 22” .177” 7 4.5 mm 2.5” 19 lbs
P22236 22” .236” 3 6 mm 2.5” 25 lbs
P24236 24” .236” 3 6 mm 3” 31.7 lbs
P2456 24” .315”(5/16”) N/A 8 mm 3” 42.4 lbs
P26236 26” .236” 3 6 mm 3.5” 37.1 lbs
P2656 26” 5/16” N/A 8 mm 3.5” 45 lbs
P2856 28” .315”(5/16”) N/A 8 mm 4.25” 59 lbs
P3238 32” .360” N/A 9 mm 4.75” 73.5 lb
P36472 36” .472” N/A 12 mm 5.125” 141 lb
Additional special concavity blades are available in select sizes. Special order only.PleaserefertothecenterholediagramfordiscbladesectiononpageXXforcenterholepartnumberspecifications.
Disc Blades
1-800-568-439134
Precision double-bevel edge disc blades continuedNotched-edge disc blades
Part # Diameter Thickness Gauge MM Concavity Weight/ea.N1611 16” .118” 11 3 mm 1.5” 7.1 lbs
N1810 18” .128” 10 3.25 mm 1.75” 8.7 lbs
N1808 18” .157” 8 4 mm 1.75” 10.3 lbs
N2009 20” .138” 9 3.5 mm 2” 11.5 lbs
N2007 20” .177” 7 4.5 mm 2” 15 lbs
N2207 22” .177” 7 4.5 mm 2.5” 18 lbs
N22236 22” .236” 3 6 mm 2.5” 23.6 lbs
N24236 24” .236” 3 6 mm 3” 28.7 lbs
N2456 24” .315”(5/16”) N/A 8 mm 3” 40 lbs
N26236 26” .236 3 6 mm 3.5” 37.1 lbs
N2656 26” 5/16” N/A 8 mm 3.5” 46 lbs
N2856 28” .315”(5/16”) N/A 8 mm 4.25” 56 lbs
N3238 32” .380" N/A 9 mm 4.75” 69 lbs
N36472 36” .472" N/A 12 mm 5.125” 138 lbs
Additional special concavity blades are available in select sizes. Special order only.
PleaserefertothecenterholediagramfordiscbladesectiononpageXXforcenterholepartnumberspecifications.
Disc Blades
1-800-568-439135
Flat-center disc blades to fit IHPlain-edge
Part # Diameter Thickness Gauge MM Concavity Weight/ea.PF1808 18” .157” 8 4 mm 1.5” 11.4 lbs
PF2007 20” .177” 7 4.5 mm 2” 16 lbs
PF2207 22” .177” 7 4.5 mm 2.5” 19 lbs
PF22236 22” .236” 3 6 mm 2.5” 24.2 lbs
PF24236 24” .236” 3 6 mm 3” 31.2 lbs
PleaserefertothecenterholediagramfordiscbladesectiononpageXXforcenterholepartnumberspecifications.
Notched-edge
Part # Diameter Thickness Gauge MM Concavity Weight/ea.NF1808 18” .157” 8 4 mm 1.5” 10.5 lbs
NF2007 20” .177” 7 4.5 mm 2” 14.6 lbs
NF2207 22” .177” 7 4.5 mm 2.5” 18.5 lbs
NF22236 22” .236” 3 6 mm 2.5” 22 lbs
NF24236 24” .236” 3 6 mm 2.5” 28.6 lbs
NF26236 26” .236” 3 6 mm 2.5” 34.8 lbs
PleaserefertothecenterholediagramfordiscbladesectiononpageXXforcenterholepartnumberspecifications.
Disc Blades
1-800-568-439136
Deep-cone disc blades to fit John DeerePlain-edge
Part # Diameter Thickness Gauge MM Concavity Weight/ea.PD2007 20” .177” 7 4.5 mm 3.27” 16 lbs
PD2207 22” .177” 7 4.5 mm 3.74” 20.8 lbs
PD22236 22” .236” 3 6 mm 3.74” 24.2 lbs
PD24236 24” .236” 3 6 mm 3.87” 31.2 lbs
PD26236 26” .236” 3 6 mm 4.51” 37.4 lbs
Please refer to the center hole diagram for disc blade section on page 43 for center hole part number specifications.
Notched-edge
Part # Diameter Thickness Gauge MM Concavity Weight/ea.ND2007 20” .177” 7 4.5 mm 3.27” 14.6 lbs
ND2207 22” .177” 7 4.5 mm 3.74” 19 lbs
ND24236 24” .236” 3 6 mm 3.87” 28.6 lbs
ND26236 26” .236” 3 6 mm 4.51” 34.8 lbs
Please refer to the center hole diagram for disc blade section on page 43 for center hole part number specifications.
Disc Blades
1-800-568-439137
Specialty bladesVortex® blades
Ideally suited for vertical tillage applications, Vortex® blades have a wavy edge with an offset curve radiating from the center.Available in flat blades, shallow concave, and flat center shallow concave. Contact Customer Service for more information.Vortex® is a trademark of CFC DistRibutors.
inPHInium blades by Bellota
A new steel chemistry and special Borodur® treatment allows inPHInium blades to achieve a hardnessof53-55HRcandstillexcelinballtests.Ifinterestedin"thediscwiththelongestlifespanwithout breaking on the market", contact Customer Service for more information. Blades are subject to minimum order quantities and are manufactured to order in select sizes.Borodur® is a trademark of Bellota Agrisolutions. Volume discountsAt certain times, Wiese Industries is able to offer volume discounts on select disc blades. As few as 100 blades may qualify, with the best pricing on truckload quantities. Pricing, selection, and delivery are subject to the particular program terms. If interested in participating, contact Customer Service.
Disc Blades
1-800-568-439138
Center holes for disc blades
Center hole configurations listed below are readily available for shipment. We have the capability to custompunchorcutmostspecialsizestomeetyourneeds.Allcenterholesarepunchedorcut1/16”over nominal axle size.
Part # suffix to add To fit axle or arbor size Dual or single punch114S 1-1/4”square Single
112S 1-1/2”square Single
118R 1-1/8”round Single
114R 1-1/4”round Single
112R 1-1/2”round Single
134R 1-3/4”round Single
2R 2” round Single
214R 2-1/4”round Single
781 7/8”squareor1”round Dual
1118 1”squareor1-1/8”square Dual
1814 1-1/8”squareor1-1/4”square Dual
1412R 1-1/4”squareor1-1/2"round Dual
1HEX 1”hex Single
114HEX 1-1/4”hex Single
DMR Case/DMIrear Centerhole:1-25/32"Boltcircle:5"Boltholes:(4)17/32"
DMF Case/DMIfront Centerhole:4-5/32"Boltcircle:5-5/8"Boltholes:(5)9/16"
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439139
Planter/drill openers (complete assemblies)
Planter/drill opener blades are manufactured using a high-quality alloy, hardened and heat-treated to meet or exceed OEM requirements. Complete assemblies include a heavy-duty hub, bearing and most come with a neoprene dust cover. Bearings are pressed into the hubs to maintain optimum planter performance. Each blade is laser inspected to insure runout and wobble are within the tolerances orig-inally specified by the OEM. Sold in vendor packs of one each. Full box quantities avail-able.
To Fit OEM # Diameter Thickness Dust Cap Wiese #John Deere AA55927 15” 3 mm Yes JD20242I3M
AA53860 15" 3.5 mm Yes JD20242
AA57466 15" 3.5 mm Yes JD20242XT
(double bearing)
CaseIH(Left/Lead) 84389196-L 14” 3.5 mm No 42ACIH90850L
CaseIH(Right/Trail) 84389195-T 14” 3.5 mm No 42ACIH90851R
Great Plains 107-135S 13.5” 3 mm Yes 42GP135
404-121S 15" 4 mm Yes 42GP154
Sunflower SN7261 15” 3.5 mm No 42SFI35
SN9753N 15" 3.5 mm No 42SFI35N
Complete assemblies to fit other OEMs may be available by special order. Contact your Wiese representative to request more information.
Planter/Drill Seed Opener Blades and Coulters
40
Drill seed opener blades
To Fit Part # Diameter Thickness Center # holes OEM#John Deere JD22991 15” .118”(3 mm) 1-3/16”CH* (6)9/32” A22291
7000, 7100, 7200,7300 2-15/16”BC** A72357
1700 Max Emerge
Max Emerge 2
Max Emerge Plus
Kinze prior to 1999 series JD22991 15” .118” (3 mm) 1-3/16”2-15/16” (6)9/32” GD1030
John Deere JD22949 13.5” .118” (3 mm) 1-3/16”CH* (6)9/32” A222949
7000, 7100 1-15/16”BC**
John Deere 8300 JDK202M 13-1/2” .118” 1-3/16”2-1/2” (6)9/32” K202M
John Deere P18197JDD 18” .197” (5 mm) 3”CH* (4)3/8” N214190
750, 1560, 1565, 1590 4-3/8”BC**
1690, 1850, 1860, 1890
CaseIHandIH510, IH603013 13-7/8” .118” (3mm) 1-3/8”CH* (6)9/32” 603013
5100, 620, 6200,5200 2-1/2”BC**
Hay-Buster 14118HBO 14” .118” (3mm) 1-3/8”CH* (6)17/64” 7500010
Vermeer107,147,1575 2-7/8”BC** (6) 17/64”
6-1/2”
(12 hole, dual circle)
Hay-Buster 14157HBC 14” .157” (4mm) 1-3/8”CH* (6)35/64” 7500064
Vermeer 107, 147, 1575
Lilliston 14157L 14” .157” (4mm) 2-9/16”CH* (4)13/32” 500-07-253
3-3/4”BC** (4) 13/32”
3-5/8”
(8 hole, dual circle)
Marliss M&W 701010 13” .118” (3mm) 1-1/2”CH* (6)3/8” 701010
United Farm Tools PG1199 15” .118” (3mm) 2”CH* (4)13/32” PG119950800057
5000 series No-Till 4” BC** square
United Farm Tools PG1019 13-1/2” .093” 1-1/2”CH* (6)7/32” PG119950800057
ConventionaldrillsandTye 2-3/4”BC** (2)5/16” PG101955-002
4-1/2” square
*Center hole**Bolt circle
1-800-568-4391
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439141
Coulter general informationCoulter blades are manufactured using high-quality steel alloy, heat-treated and hardened to meet or exceed OEM requirements. Sold in vendor units of one each.
Wiese offers coulter blades with many different edge types listed and explained below. Coulters are grouped according to edge type. Available sizes and part numbers are listed in the appropriate tables. Please refer to the center hole diagram for exact measurements and complete application details. Wiese stocks a wide variety of configurations and sizes. Special center hole configurations or sizes are also available. Special orders may be subject to minimum order requirements and additional lead-time.
Understanding coulter blade part numbersThe Wiese part number system is explained by simply using the first one or two letters to denote the desired edge type (plain, notched, wavy, fluted). The next two characters denote the diameter(16”, 17”, 18”). The next three characters denote the thickness in inches (.138”, .157”). The last set of letters indicate the center hole configuration (AC-Allis Chalmers, B-Brillion). See table for further explanation.
Edge type prefix and approximate shipping weight
Part # prefix Edge type Diameter Thickness Weight/ea.B17157 Bubble 17” .157 (4 mm) 9.9 lbs
F17157 Fluted 17” .157 (4 mm) 9.3 lbs
F20177 Fluted 20” .177 (4.5 mm) 15.9 lbs
F20197 Fluted 20” .197 (5 mm) 18 lbs
F22197 Fluted 22” .197 (5 mm) 22 lbs
N17157 Notched 17” .157 (4 mm) 9.2 lbs
N20177 Notched 20” .177 (4.5 mm) 14.6 lbs
N20197 Notched 20” .197 (5 mm) 16.3 lbs
N22197 Notched 22” .197 (5 mm) 19 lbs
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439142
Edge type prefixes and approximate shipping weights continued
Part # prefix Edge type Diameter Thickness Weight/ea.W17157 8 wave 2” 17” .157 (4 mm) 7.3 lbs
W17177 8 wave 2” 17” .177 (4.5 mm) 10.3 lbs
WS16157 8 wave 1” 16” .157 (4 mm) 9 lbs
WS17157 8 wave 1” 17” .157 (4 mm) 10.3 lbs
WS17197 8 wave 1” 17” .197 (5 mm) 12.1 lbs
WS20177 8 wave 1" 20” .177 (4.5 mm) 15.5 lbs
WT15157 12wave3/4” 15” .157(4mm) 7.6lbs
WT16157 12wave3/4” 16” .157(4mm) 9lbs
WT17157 12wave3/4” 17” .157(4mm) 11lbs
WT20197 12wave3/4” 20” .197(5mm) 16.5lbs
WY16177 25wave5/8” 16” .177(4.5mm) 10.2lbs
WY17177 25wave5/8” 17” .177(4.5mm) 10.9lbs
P18157 Plain 18” .157 (4 mm) 11 lbs
P18177 Plain 18” .177 (4.5 mm) 12.5 lbs
P18197 Plain 18” .197 (5 mm) 12.9 lbs
P20177 Plain 20” .177 (4.5 mm) 15.3 lbs
P20197 Plain 20” .197 (5 mm) 16.1 lbs
P22197 Plain 22” .197 (5 mm) 20.8 lbs
P22236 Plain 22” .236 (6 mm) 29 lbs
P24197 Plain 24” .197 (5 mm) 25.5 lbs
V20236 Vortex® 20” .236 (6 mm) 20.4 lbs
V22236 Vortex® 22” .236 (6 mm) 26.5 lbs
Vortex® is a trademark of CFC Distributors.
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439143
Center hole patternsThe majority of coulters are bolted on to a hub individually for each tillage unit. The following are hole patterns for some of the more popular hubs. Refer to your owner's manual for new coulter diameter and thickness recommendations.Center hole refers to the diameter of the hole that fits around the shaft. This dimension is typically 1/16"largerthantheactualshaftsizetopreventrubbing.Bolt circle refers to the diameter of a scribed circle through the centers of the bolt holes. Do not simply measure the distance from one bolt hole to another across the center hole. This can lead to an incor-rect fit of the new coulter.Bolt holes refers to the quantity and diameter of the holes that the bolts fit through. The first number is the number of bolt holes. The second number is the diamter of the bolt hole. This dimension is typically 1/32"largerthanthebolttobeused.
To Fit Diagram To Fit Diagram
Allis Chalmers and others
AllisChalmers,IH, Glencoe and others
Brillion and othersJohn Deere 712 Mulcher and others
FlexKing, Miller, Noble, Sunflowerandothers Ford 4-bolt
Ford 6-bolt Glencoe, Farmhand, Orthman and others
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439144
Center hole patterns continued
To fit Diagram To fit Diagram
Hiniker,Brillion,DMI,Sukup, Glencoe, Farmhand and others
IHolderstyle
IHnewerstyle720,820
JohnDeereHS,NU,7000-7100, Max-Emerge, MaxEmerge Plus
John Deere 750, 1500, 1600, 1800 series drill
John Deere 7200, 7300, MaxEmerge2, MaxEmerge Plus
Kinze, Black Machine and others Massey Ferguson
Melroe, Wil-Rich, DMI, Blu-Jet, Progressive and others
Combination of MLWR and OL
Oliver, White, Great Plains, Yetter, Kinze and others
Orthman and others
Planter/Drill Seed Opener Blades and Coulters
1-800-568-439145
Center hole patterns continued
To fit Diagram To fit Diagram
Rawson and othersWetherell, Alloway, Tebben,B&H,Nobleand others
Plain (P) Bubble (B) Fluted (F)
Vortex® (V)
Notched (N)
25 wave (WY)12-13 wave (WT)8 wave 1" (WS)8 wave 2" (W)
Plow Parts
1-800-568-439146
Plow parts
Wiese plow parts, including shares, shins, moldboards, landsides and trashboards, are manufac-tured using high-carbon, heat-treated steel. The LW series plowshares are upset forged, making the nose section of the plowshare resistant to breakage and wear. Most LW shares are also available with hardfacing on the tip and blade. Rib plow shares have a raised bevel running horizontally for added strength and wear. Plow parts are listed below according to make and bottom series. Please remember when replacing one part on a plow, it may be necessary to loosen other parts to allow for wear. For example, when replacing the shin it may be necessary to loosen the moldboard and the share to allow the new part to fit. Then simply tighten other parts when proper alignment is achieved. Sold in vendor packs of 6 each and packed with nuts and bolts unless otherwise specified. Rib shares do not include nuts and bolts. Some discontinued and custom plow parts may be available. Minimum order quantities and extended lead times will apply.
To fit Allis Chalmers 387 series (dropped front hole)
Part # Description Bolt holes Thickness OEM# Weight/ea.347966 14/16"Moldboard (5)3/8” 5/16” 347966 30lbs
LAC16487 16” Rock share LW (1)1/2”(3)7/16” 3/8” 347749 53lbsctn/6
572181
572184
LAC18487 18” Rock share LW (1)1/2”(3)7/16” 3/8” 573307 57lbsctn/6
WAC13 Shin (2)3/8” 5/16” 347649 24lbsctn/6
819W Landside inner plate (2)9/16” 1/2” 349819 44lbsctn/6
868W Wear pad (2)1/2” 1/2” 20lbsctn/6
TBUV Trashboards (2)3/8” 5/16” 32lbsctn/6
Plow Parts
1-800-568-439147
To fit Allis Chalmers 387 series (in line holes)
Part # Description Bolt holes Thickness OEM# Weight/ea.LML7052 18” Rock share LW (1)1/2”(3)7/16” 18”-3/8” 6528797 52lbsctn/6
6528798
To fit Case series EXA, B, C, D and E
Part # Description Bolt holes Thickness OEM# Weight/ea.EX16 16" Moldboard (7)3/8” 5/16” T60001 28 lbs
LCA464 14”/16” Rock share LW (1)1/2”(3)3/8” 3/8” T39134 47lbsctn/6
T39135
RSC464 14”/16” Rib share (1)1/2”(3)3/8” 3/8” T39134 47lbsctn/6
T39135
WCA16 Shin (2)3/8” 5/16” T60003 28lbsctn/6
To fit DMI (Hydro-Wide)
Part # Description Bolt holes Thickness OEM# Weight/ea.R41916 16" Moldboard (5)7/16” 5/16” 33111601 30lbs
R41916L 16" Moldboard(left) (5)7/16” 5/16” 33111601L 30 lbs
LML164 16” Rock share LW (4)7/16” 3/8” 33131640 46lbsctn/6
RSML16 16” Rib share (4)7/16” 3/8” 33131640 46lbsctn/6
LML184 18” Rock share LW (4)7/16” 3/8” 33131840 52lbsctn/6
RSML18 18” Rib share (4)7/16” 3/8” 33131840 52lbsctn/6
W09 Shin (2)7/16” 5/16” 33111602 29lbsctn/6
4253W Landside inner plate (1)5/8”(3)7/16” 1/2” 33141602 51lbsctn/6
4256W Wear pad (2)7/16” 1/2” 33141601 23lbsctn/6
Plow Parts
1-800-568-439148
To fit Ford (general purpose and heavy-duty series)
Part # Description Bolt holes Thickness OEM# Weight/ea.104409 14" Moldboard (5)7/16” 5/16” 104409 27 lbs
104412 16" Moldboard (5)7/16” 5/16” 104412 30lbs
RSF12 12” Rib share (3)7/16” 3/8” 105203A 37lbsctn/6
LFD144 14” Rock share LW (4)7/16” 3/8” 7100369 42lbsctn/6
RSF144 14” Rib share (4)7/16” 3/8” 7100369 42lbsctn/6
LFD164 16” Rock share LW (4)7/16” 3/8” 7100370 47lbsctn/6
RSF164 16” Rib share (4)7/16” 3/8” 7100370 47lbsctn/6
LFD185 18” Rock share LW (5)7/16” 3/8” 7101980 54lbsctn/6
RSF185 18” Rib share (5)7/16” 3/8” 7101980 52lbsctn/6
WFD3S Shin (2)7/16” 5/16” 201344 22lbsctn/6
980W Landsidefront(after1958) (1)7/16”(1)5/8” 1/2”front 107980 35lbsctn/6
981W Landsiderear(after1958) (1)7/16”(3)5/8” 1/2”rear 107981 59lbsctn/6
To fit Ford (series 150, 151, 152, 154 Oliver/White bottoms)
Part # Description Bolt holes Thickness OEM# Weight/ea.R41916 16" Moldboard (5)7/16” 5/16” R419-16 30lbs
R41916L 16" MoldboardLH (5)7/16” 5/16” R419-16L 30 lbs
R61918 18" Moldboard (5)7/16”(1)7/16” 5/16” R619-18 32lbs
LOL164 16” Rock share LW (1)1/2”(3)7/16” 3/8” SBP219627BF30lbs
RSO164 16” Rib share (1)1/2”(3)7/16” 3/8” SBP219627BF30lbs
LOL685 18” Rock share LW (1)1/2”(4)7/16” 3/8” SBP219629BF47lbsctn/6
RSO185 18” Rib share (1)1/2”(4)7/16” 13/8” SBP219629BF47lbsctn/6
WO9 Shin (2)7/16” 5/16” EP7490C 52lbsctn/6
WO9L Shin left (2)7/16” 5/16” 217404BS 22lbsctn/6
379W Landsideinnerplate (1)5/8”(2)1/2” 1/2” SBP220379B 60lbsctn/6
919W Landsidewearpadfor379W (2)5/8” 3/4” SBP220919B 62lbsctn/6
Plow Parts
1-800-568-439149
To fit IH Super Chief
Part # Description Bolt holes Thickness OEM# Weight/ea.462313 14" Moldboard (4)7/16” 5/16” 462313 30lbs
462314 16"-20" Moldboard (4)7/16” 5/16” 462314R 33lbs
488265R
58996C
464603 16-20"MoldboardLH (4)7/16” 5/16” 46403L 33lbs
LIMF143 14" Rock share (1)1/2”(2)7/16” 3/8” 463244R 42lbsctn/6
179349A1
LIH144 14"RockshareLW (1)1/2”(3)7/16” 3/8” 463236R 42lbsctn/6
RSI144 14" Rib share (1)1/2”(3)7/16” 3/8” 463236R 42lbsctn/6
LIMF163 16"RockshareLW (1)1/2”(3)7/16” 3/8” 463245R 47lbsctn/6
LIH164 16"RockshareLW (1)1/2”(3)7/16” 3/8” 463237R 47lbsctn/6
RSI164 16"Ribshare (1)1/2”(3)7/16” 3/8” 463237R 47lbsctn/6
LIH164L 16"RockshareLWLH (1)1/2”(3)7/16” 3/8” 464582R 47lbsctn/6
LIH184 18"RockshareLW (1)1/2”(3)7/16” 3/8” 463238R 52lbsctn/6
RSI184 18"Ribshare (1)1/2”(3)7/16” 3/8” 463238R 52lbsctn/6
LIH184L 18"RockshareLWLH (1)1/2”(3)7/16” 3/8” 464583R 52lbsctn/6
RSI184L 18"RibshareLH (1)1/2”(3)7/16” 3/8” 4634583R 52lbsctn/6
WI25 Shin (2)7/16” 5/16” 179320A 24lbsctn/6
488266R
WI25L Shinlefthand (2)7/16” 5/16” 179321A 24lbsctn/6
464595
058UV Landsidewearplate (2)7/16” 1/2” 59058 22lbsctn/6
058UVL LandsidewearplateLH (2)7/16” 1/2” 1980947C 22lbsctn/6
59057 Landsideinnerplate (1)7/16”(2)1/2” 1/2” 59057 45lbsctn/6
TBIH Trashboard (2)3/8” 5/16” 31.5lbs
TBIHL TrashboardLH (2)3/8” 5/16” 31.5lbs
Plow Parts
1-800-568-439150
To fit IH Super Chief - Continued
Deep-suck shares to fit IH are manufactured using high-carbon, heat-treated steel. The special design includes a long nose for superior penetration and suction. The deep suck plowshare is ideal for use on tougher soils where it is difficult to keep the plow in the ground or when deeper penetration is desired. Also available hard-surfaced. Sold in vendor units of one each without bolts.
Part # Description Bolt holes Thickness OEM# Weight/ea. LIH18DS 18"Deepsuckplowshare (1)1/2”(3)7/16” 3/8” 463254R 9.2lbs
LIH18DSL 18"DeepsuckplowshareLH (1)1/2”(3)7/16” 3/8” 464591R 9.2lbs
To fit John Deere (series HS356, 400, 500, and SDT)
Part # Description Bolt holes Thickness OEM# Weight/ea.HS314 14" Moldboard (6)7/16” 5/16” A20700 26lbs
HS316 16" Moldboard (7)7/16” 5/16” A20702 32 lbs
LJD143 14" Rock share LW (3)7/16” 3/8” A100005 42lbsctn/6
LJD144 14" Rock share LW (1)1/2”(3)7/16” 3/8” A10225 42lbsctn/6
RSJD144 14" Rib share (1)1/2”(3)7/16” 3/8” A10225 42lbsctn/6
LJD163 16" Rock share LW (3)7/16” 3/8” A10007 47lbsctn/6
LJD164 16" Rock share LW (1)1/2”(3)7/16” 3/8” A10007 47lbsctn/6
RSJD164 16" Rib share (1)1/2”(3)7/16” 3/8” A10007 47lbsctn/6
WD5 14" Shin (2)7/16” 5/16” A14700 23lbsctn/6
WD6 16" Shin (2)7/16” 5/16” A14702 25lbsctn/6
493W Landsideinnerplate (2)1/2” 1/2” AA16493 27lbsctn/6
262W Wearpad (2)7/16” 1/2” A16495 24lbsctn/6
TBJD Trashboard (2)7/16” 5/16” 31lbsctn/6
Plow Parts
1-800-568-439151
To fit John Deere (NU 1036-1046 and NU1048)
Part # Description Bolt holes Thickness OEM# Weight/ea.NU1036 16" Moldboard (7)7/16” 5/16” A15596 32lbs
NU1048 18" Moldboard (8)7/16” 5/16” A17431 38lbs
NU1048L 18"MoldboardLH (8)7/16” 5/16” A17432 38lbs
LJD164* 16" Rock share LW (1)1/2”(3)7/16” 3/8” A10227 47lbsctn/6
RSJD164* 16" Rib share (1)1/2”(3)7/16” 3/8” A10227 47lbsctn/6
LJD164L* 16"RockshareLWLH (1)1/2”(3)7/16” 3/8” A10227 47lbsctn/6
LJD185 18" Rock share LW (1)1/2”(4)7/16” 3/8” A10225 52lbsctn/6
RSJD185 18" Rib share (1)1/2”(4)7/16” 3/8” A10225 52lbsctn/6
LJD185L 18"RockshareLWLH (1)1/2”(4)7/16” 3/8” A10225 52lbsctn/6
RSJD185L 18"RibshareLH (1)1/2”(4)7/16” 3/8” A10225 52lbsctn/6
WD3 Shin (2)7/16” 5/16” A15594 26lbsctn/6
WD3L Shin left (2)7/16” 5/16” A15606 26lbsctn/6
493W Landsideinnerplate (2)1/2” 1/2” AA16493 27lbsctn/6
262W Wearpad (2)7/16” 1/2” AA15262 23lbsctn/6
A16495
494W LandsideinnerplateLH (2)1/2” 1/2” AA16494 27lbsctn/6
263W WearpadLH (2)7/16” 1/2" AA15263 23lbsctn/6
A16496
TBJD Trashboards (2)7/16” 5/16” 32lbsctn/6* 4 hole share can be used in place of 5-hole share, share covers last hole
Plow Parts
1-800-568-439152
To fit John Deere (NU 400-NU450 “metric” series)
Part # Description Bolt holes Thickness OEM# Weight/ea.32209 18" Moldboard (4)7/16” 5/16” 32209 38 lbs
LJDM163 16" Rock share LW (3)16mm 3/8” A32221 55lbsctn/6
LJDM183 18" Rock share LW (3)16mm 3/8” A42808 57lbsctn/6
RSJDM183 18" Rib share (3)16mm 3/8” A42808 57lbsctn/6
LJDM203 20" Rock share LW (3)16mm 3/8" A32223 66lbsctn/6
WD29 Shin (2)7/16” 5/16” A30129 28lbsctn/6
862W Landsidewearpad(2)hole (2)5/8” 1/2” A27862 34lbsctn/6
47716W Landsidewearpad(3)hole (3)5/8” 1/2” A45226 53lbsctn/6
TBJD Trashboards (2)7/16” 5/16” 32lbsctn/6
To fit Minneapolis Moline NL, and David Brown General Purpose
Part # Description Bolt holes Thickness OEM# Weight/ea.R41914 14" Moldboard (5)7/16” 5/16” 20P34 27lbs
HS-138
R41916 16" Moldboard (5)7/16” 5/16” 20P42 30lbs
HS-139
LOL144 14" Rock share LW (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
22013BS
RSO144 14" Rib share (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
22013BS
LOL164 16" Rock share LW (1)1/2”(3)7/16” 3/8” HD16FCO 47lbsctn/6
220116BS
RSO164 16" Rib share (1)1/2”(3)7/16” 3/8” HD16FCO 47lbsctn/6
220116BS
WO9 Shin (2)7/16” 5/16” 7490 21lbsctn/6
Plow Parts
1-800-568-439153
To fit Massey Ferguson (N bottom)
Part # Description Bolt holes Thickness OEM# Weight/ea.660022 14" Moldboard (5)7/16” 5/16” 660010-M1 27lbs
660022-M-91
660204 16" Moldboard (5)7/16” 5/16” 660204-M1 29lbs
660206
66165IL 16" MoldboardLH (5)7/16” 5/16” 66165L 29 lbs
LIMF143 14" Rock share LW (3)7/16” 3/8” 463244M1 42lbsctn/6
LMF144 14" Rock share LW (4)1/2” 3/8” 475161M1 42lbsctn/6
LIMF163 16" Rock share LW (3)7/16” 3/8” 463245M1 47lbsctn/6
LMF164 16" Rock share LW (4)1/2” 3/8” 475716M1 47lbsctn/6
RSMF164 16" Rib share (4)1/2” 3/8” 475716M1 47lbsctn/6
LMF164L 16" Rock share LWLH (4)1/2” 3/8” 47lbsctn/6
LMF184 18"RockshareLW (4)1/2” 3/8” 475823M1 52lbsctn/6
RSMF184 18"Ribshare (4)1/2” 3/8” 475823M1 52lbsctn/6
LMF184L 18"RockshareLWLH (4)1/2” 3/8” 52lbsctn/6
RSMF184L 18"RibshareLH (4)1/2” 3/8” 52lbsctn/6
LMF68488 16”/18”Rockshare88series (4)1/2”(lastholeis15” 3/8” 4375197M1 52lbsctn/6
from the front)
WMFS Shin (2)7/16” 5/16” 660008M1 21lbsctn/6
WMFSL ShinLH (2)7/16” 5/16” 661584 21lbsctn/6
475W Landside(newerN&88series) (2)7/16”(1)5/8” 1/2” 475153M1F 60lbsctn/6
Frontorrear (2)1/2”plainhole 475973M1R
475WL Landside(newerN&88series)LH (2)7/16”(1)5/8” 1/2” 475983M 60lbsctn/6
(2)1/2”plainhole
058UV Wearpad(2)7/16” 1/2” 22lbsctn/6
058UVL WearpadLH(2)7/16” 1/2” 22lbsctn/6
Plow Parts
1-800-568-439154
To fit Melroe (Oliver style bottoms)
Part # Description Bolt holes Thickness OEM# Weight/ea.R41914 14" Moldboard (5)7/16” 5/16” 6522181 27lbs
R41916 16" Moldboard (5)7/16” 5/16” 6522185 30 lbs
LML144 14" Rock share LW (4)7/16” 3/8” 6526827 42lbsctn/6
LML164 16” Rock share LW (4)7/16” 3/8” 6526832 47lbsctn/6
LML184 18” Rock share LW (4)7/16” 3/8” 6526829 52lbsctn/6
WO9 Shin (2)7/16” 5/16” 6522182 21lbsctn/6
6000W Landsideinnerplate (3)7/16”(1)1/2” 1/2” 6526000 60lbsctn/6
847W Wearpad (2)7/16” 1/2” 6526847 22lbsctn/6
TBUV Trashboards (2)3/8” 5/16” 32lbsctn/6
To fit Melroe (987 series) *AC 387 bottom
Part # Description Bolt holes Thickness OEM# Weight/ea.347966 16”-Moldboard (5)3/8” 5/16” 65209020 30lbs
LML7052 18” Rock share LW (1)1/2”(3)7/16” 3/8” 6528798 52lbsctn/6
6528798
WAC13 Shin (2)3/8” 5/16” 652091 24lbsctn/6
819W Landsideinnerplate (2)5/8”(2)1/2” 1/2” 6526543 43lbsctn/6
868W Wearpad (2)1/2” 1/2” 20lbsctn/6
TBUV Trashboard (2)3/8” 5/16” 32lbsctn/6
Plow Parts
1-800-568-439155
To fit Oliver/White 588 and 598 series (deep-till bottom)
Part # Description Bolt holes Thickness OEM# Weight/ea.220746 18"-20" Moldboard (6)7/16” 5/16” 220746BS 33lbs
LOL685 18" Rock share LW (1)1/2”(4)7/16” 3/8” 52lbsctn/6
RSO185 18" Rib share (1)1/2”(4)7/16” 3/8” 52lbsctn/6
LOL205 20” Rock share LW (1)1/2”(4)7/16” 3/8” 54lbsctn/6
WO81 Shin (2)7/16” 5/16" 220381B 24lbsctn/6
379W Landsideinnerplate (3)5/8”(2)1/2” 1/2” 220379B 60lbsctn/6
919W Wearpad (2)5/8” 3/4” 220919B 62lbsctn/6
TBUV Trashboard (2)3/8” 5/16” 31.5lbsctn/6
To fit Oliver/White 625, 425 and 225 series
Part # Description Bolt holes Thickness OEM# Weight/ea.R62518 18" Moldboard (6)3/8” 5/16” R62518 27 lbs
LOL144 14" Rock share LW (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
RSO144 14" Rib share (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
LOL144L 14"RockshareLWLH (1)1/2”(3)7/16” 3/8” 42lbsctn/6
LOL164 16" Rock share LW (1)1/2”(3)7/16” 3/8” HD16FCO 47lbsctn/6
RSO164 16" Rib share (1)1/2”(3)7/16” 3/8” HD16FCO 47lbsctn/6
LOL164L 16"RockshareLWLH (1)1/2”(3)7/16” 3/8” 47lbsctn/6
LOL685 18" Rock share LW (1)1/2”(4)7/16” 3/8” HD18FCO 52lbsctn/6
RSO185 18" Rib share (1)1/2”(4)7/16” 3/8” HD18FCO 52lbsctn/6
LOL685L 18"RockshareLWLH (1)1/2”(4)7/16” 3/8” 52lbsctn/6
LOL205 20" Rock share LW (1)1/2”(4)7/16” 3/8” 54lbsctn/6
WO8 Shin (2)3/8” 12”-18”-5/16” EP7488C 19lbsctn/6
WO8L ShinLH (2)3/8” 12”-18”-5/16” 218284 19lbsctn/6
270W Landside (3)7/16”(1)5/8” 1/2” 218270B 56lbsctn/6
270WA Landside (3)5/8”(1)7/16” 1/2” 10128935 56lbsctn/6
058UV Wearpad (2)7/16" 1/2” 22lbsctn/6
TBUV Trashboards (2)3/8” 5/16” 31.5lbsctn/6
TBUVL TrashboardsLH (2)3/8” 5/16” 31.5lbsctn/6
Plow Parts
1-800-568-439156
To fit Oliver R419 and R619 series
Part # Description Bolt holes Thickness OEM# Weight/ea.R41914 14" Moldboard (5)7/16” 5/16” R419-14 27lbs
R41914L 14" MoldboardLH (5)7/16” 5/16” R419-14L 27lbs
R41916 16" Moldboard (5)7/16” 5/16” R419-16 30lbs
R41916L 16" MoldboardLH (5)7/16” 5/16” R419-16L 30lbs
R61918 18" Moldboard (6)7/16” 5/16” 34lbs
LOL144 14" Rock share LW (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
220013BS
RSO144 14" Rib share (1)1/2”(3)7/16” 3/8” HD14FCO 42lbsctn/6
220013BS
LOL144L 14"RockshareLWLH (1)1/2”(3)7/16” 3/8” 42lbsctn/6
LOL164 16" Rock share LW (1)1/2”(2)7/16” 3/8” HD16FCO 47lbsctn/6
220016BS
RSO164 16" Rib share (1)1/2”(2)7/16” 3/8” HD16FCO 47lbsctn/6
220016BS
LOL164L 16"RockshareLWLH (1)1/2”(3)7/16” 3/8” 47lbsctn/6
LOL685 18" Rock share LW (1)1/2”(4)7/16” 3/8” HD18FCO 52lbsctn/6
220024BS
RSO185 18" Rib share (1)1/2”(4)7/16” 3/8” HD18FCO 52lbsctn/6
220024BS
LOL685L 18"RockshareLWLH (1)1/2”(4)7/16” 3/8” 52lbsctn/6
WO9 Shin (2)7/16” 5/16” EP7490C 21.5lbsctn/6
WO9L ShinLH (2)7/16” 5/16” 217404BS 21.5lbsctn/6
270W Landside (3)7/16”(1)5/8” 1/2” 218270B 56lbsctn/6
270WA Landsidenewstyle (3)5/8”(1)7/16” 1/2” 10128935 57lbsctn/6
(use 058UV wear pad)
058UV Wearpad (2)7/16” 1/2” 22lbsctn/6
TBUV Trashboard (2)3/8” 5/16” 31.5lbsctn/6
TBUVL TrashboardLH (2)3/8” 5/16” 31.5lbsctn/6
Plow Parts
1-800-568-439157
To fit Wil-Rich (Oliver style bottom)
Part # Description Bolt holes Thickness OEM# Weight/ea.R41916 16" Moldboard (5)7/16” 5/16” 215802 30lbs
14258
LWR164 16" Rock share LW (4)1/2” 3/8” 215804 47lbsctn/6
14363
LWR184 18" Rock share LW (4)1/2” 3/8” 14255 52lbsctn/6
RSWR18 18" Rib share (4)1/2” 3/8” 14255 52lbsctn/6
WO9 Shin (2)7/16” 5/16” 213022 21.5lbsctn/6
14257
4253W Landsideinnerplate (1)5/8” 1/2” 14253 51lbsctn/6
215111
4256W Wearpad (2)7/16” 1/2” 14256 62lbsctn/6
215225
TBUV Trashboard (2)3/8” 5/16” 31.5lbsctn/6
To fit Wil-Rich (deep-till bottom)
Part # Description Bolt holes Thickness OEM# Weight/ea.NU1036 18" Moldboard (7)7/16” 5/16” 20038 32lbs
20035
LWR18D 18" Rock share LW (4)1/2” 3/8” 20033 52lbsctn/6
WWR34 Shin (2)7/16” 5/16” 20034 26lbsctn/6
20037
4256W Landsidewearpad (2)7/16” 1/2” 14256 62lbsctn/6
215225
TBJD Trashboard (2)3/8” 5/16” 31.5lbsctn/6.
Plow Parts
1-800-568-439158
Two-way plow parts
Two-way plow parts are manufactured using high-carbon, heat-treated steel. Moldboards and Shins are manufactured using solid steel. Landsides are sold in vendor units of 6 each packed with required nuts and bolts. All other parts are sold in vendor units of 1 without bolts.
To fit Harrell
Part # Description Bolt holes Thickness OEM# Weight/ea.7921736 Moldboard (8)1/2" 5/16" 7921736 30lbs
SWH79006 Double-end share (5)7/16" 3/8" 7900636 11.5lbs
RSH79028 Double-endribshare (5)7/16" 3/8" 7900636 12lbs
SWH79028 Double-endshareHS (5)7/16" 3/8" 7902836 12lbs
7920836 Shin(lower)chrome (2)7/16" as cast 7920836 1.6 lbs
9820736 Shin (upper) steel (2)7/16" 5/16" 9820736 1.9lbs
79010W Landside(short) (2)1/2" 1/2” 79010W 23lbsctn/6
79206W Landside(long) (4)1/2" 1/2” 218270B 46lbsctn/6
To fit Baker
Part # Description Bolt holes Thickness OEM# Weight/ea.SWB100 Double end share (6)1/2" 3/8" 11.5lbs
To fit Long
Part # Description Bolt holes Thickness OEM# Weight/ea.SWL791406 Double end share (5)7/16" 3/8" B791406 11.5lbs
79010W Landside (2)1/2" 1/2” 791404W 23lbsctn/6
Plow Parts
1-800-568-439159
To fit John Deere
Part # Description Bolt holes Thickness OEM# Weight/ea.57264 Moldboard (6)7/16" 5/16" P-57264 21lbs
SWD57270 Double end share (4)7/16" 3/8" 57270 11.5lbs
RSD57270 Double end share (4)7/16" 3/8" 57270 11.5lbs
SWD57043 DoubleendshareHS (4)7/16" 3/8" 57043 12lbs
57265 ShinLH (3)7/16" 5/16" P-57265 5.6lbs
57266 ShinRH (3)7/16" 5/16" P-57265 5.6lbs
57046 Landside (2)7/16" 1/2" P-57046 3.83lbs
57522 Landside rear (4)7/16" 5/16" P-57522 8.2lbs
5760071 Landside rear reversible (3)7/16"(6total) 1/2" P-60071 10.2lbs
Kverneland Plow Point To fit Kverneland Plows (A,B,BA,C,D series)
Part # Description Bolt holes Thickness OEM# Weight/ea.53090 Reversible plow point (2)7/16" 7/16" 53090 15lbsctn/6
Fertilizer Knives
1-800-568-439160
Front-swept knives
Front-swept knives are manufactured with universal hole and slot punches to fit most side-mount fertilizer applicators. All knives are manufactured using high-carbon, heat treated steel. Most knives are available with high-chrome alloy inserts for superior wear and durability. Part numbers listed below are setupwithstandard3/8”steeltubesandchrometubeprotectorswhereavailable.PleaserefertotheWiese Fertilizer Knife Catalog for additional knife selections and options.
Part # Description Shank size Chrome insert Tube protector Weight/ea.A50H104X Std knife 1/2”x2-1/2” Yes Yes 6.3lbs
A50UVX1104 Drop-forged knife 1/2”x2” Yes Yes 5.5lbs
A50SK103X Heavy-dutyknife 1/2”x2-1/2” Yes Yes 7lbs
A50SS104X Super sealer (wide foot) 1/2”x2-1/2” Yes(heavy) Yes 6.6lbs
CO501000 Extra-thin knife (coulter) 3/8”x2” No No 3.2lbs
Back-swept knives
Back-swept knives are manufactured with universal hole and slot punches to fit most side-mount fertilizer applicators. Back-swept knives are manufactured using high-carbon, heat-treated steel. Knives are available with hard-surfacing or high-chrome alloy inserts on wear areas. Chrome tube protec-torsareavailableifapplicable.Allkniveslistedbelowaresetupstandardwith3/8”tubes.Othertubeoptions and sealers are available. Please refer to the Wiese Fertilizer Knife Catalog for additional knife selections and options.
Part # Description Shank size Chrome insert Tube protector Weight/ea.A50VT1000 Thin curved knife 3/8”x2” No No 3.1lbs Short(13-1/2”)
A50VT1010 Thin curved knife 3/8”x2” No No 3.3lbs Thincurvedknife (Hardfacedin Hardsurfaced frontoftube)
A50BK104X Angled knife 1/2”x2-1/2” YesFullw/foot Yes 6.8lbs Heavyduty
Miscellaneous Parts
1-800-568-439161
Furrower points
Furrower points are manufactured using high-carbon, heat treated steel. Sold in vendor units of one each.
Part # Width Bolt holes Thickness Weight/ea.H1110UB 10” (2)7/16” 1/4" 6.4lbs
H1112UB 12” (2)7/16” 1/4" 8.8lbs
H1115UB 15” (2)7/16” 1/4" 12.4lbs
H1118UB 18” (2)7/16” 1/4" 16.2lbs
H1120UB 3” (2)7/16” 1/4" 2.1lbs
36FP312 3” (2)7/16” 3/8" 3.8lbs
Note: Other furrowers may be available. Please contact our customer service department for your specific furrower requirements.
Crescent hoes
Crescent hoes are manufactured using high-carbon, heat treated steel. Sold in vendor units of one each.
Part # Description Bolt hole Centers Weight/ea.1016R 6”X1/4”right 3/8” 1-1/4”to2” 1.9lbs
1017L 6”X1/4”left 3/8” 1-1/4”to2” 1.9lbs
Miscellaneous Parts
1-800-568-439162
Big Ox points
Big Ox points aredesignedtofitHP-5B-946scarifiershanksandotherequipment.Thesehigh-chromealloypointsareslip-ontypeandinterchangewithCaterpiller#HP-5B-946andHensely#2DH5572H.Sold in vendor units of one each.
Part # Description Weight/ea.41WOX Big Ox slip on point (chrome) 3 lbs
1LO crimp-on tooth1LO crimp-on tooth designedtofitmostboxscrapersandsmallripperswith3/4”to1”shanks.FitsHamby, Roll-A-Cone, Bingham, Johnson, Great Plains, Woods, Tayorway, Howard, Texas Ripper, and others. Sold in vendor units of one each. Also packaged in boxes of 20 each.
Part # Description Weight/ea.41W1LO Crimp-onpointw/1”wideboot 2 lbs
41W1LOC Crimp-onpointw/1”widebootandchromecap 2.3 lbs
41W1LOC2 Crimp-onpointw/1”widebootand6"chromefincap 2.3 lbs
Lister unit weld-on repairsWeld-on repairs are designed to repair worn lister points by placing a new drop-forged point on worn or rounded lister shovels. Sold in vendor units of one each.
Part # Description Size Weight/ea.L400 Drop-forged repair point 4-3/4”wideX5”long 1.6lbs
Miscellaneous Parts
1-800-568-439163
Chrome drill points
Chrome drill points to fit drill shoes are cast using high-chrome alloy for superior wear and durability. Sold in vendor units of one each.
Part # Description Mounting style Weight/ea.762010P Acra-Plant Z6 Pin on .8 lbs
762010 Acra-Plant Z6 Bolt on .86 lbs
762030 Acra-Plant eagle beak Pin on 1.0 lbs
762030SK Acra-Plant eagle beak Bolt on 1.0 lbs
DNC715V Acra-Plant V runner Bolt on .7 lbs
762014P Deere eagle beak Pin on .6 lbs
762014 Deere eagle beak Bolt on .65 lbs
762641 Deere V runner Pin on .8 lbs
DNC657V Deere V runner Pin on .9 lbs
762955 Deere standard Pin on .8 lbs
DNC657D Deere spear point Pin on .75 lbs
762004 IHeaglebeak Bolton .7 lbs
762015 IHsharpeaglebeak Pinon .6 lbs
DNC757I IHflatbottom Bolton 1.0 lbs
DNC809V IHVrunner Bolton 1.0 lbs
Chrome points (weld-on)
Chrome points (weld-on) are cast using high-chrome for superior wear. Weld-on chrome points are used to extend the life of sweeps and chisel points. The chrome points are used in highly abrasive soils and high acreage situations. Sold in vendor units of one each.
Part # Description Weight/ea.761002 Sweep point conventional chisel plow sweeps .2 lbs
761006 3" twisted chisel point cap-over 1 lbs
Bolts and Nuts
1-800-568-439164
Clipped head bolts are used primarily on plow shares, landsides and 3-piece chisel points.
Part # Description Length Nut part # BCH38114 3/8”CH 1-1/4” BHN38
BCH716114 7/16”CH 1-1/4” BHN716
BCH716114L 7/16”CH(left) 1-1/4” BHN716L
BCH716112 7/16”CH 1-1/2” BHN716
BCH7162 7/16”CH 2” BHN716
BCH12138 1/2”CH 1-3/8” BHN12
BCHM16M36 16mm 36mm BHNM16
#3 plow head bolts are used primarily on shins, moldboards, landsides, chisel spikes and others.
Part # Description Length Nut part # BPH38114 3/8”PH 1-1/4” BHN38
BPH38112 3/8”PH 1-1/2” BHN38
BPH38134 3/8”PH 1-3/4” BHN38
BRH716114 7/16”PH 1-1/4” BHN716
BPH716112 7/16”PH 1-1/2” BHN716
BRH716134 7/16”PH 1-3/4” BHN716
BRH7162 7/16”PH 2” BHN716
BPH716212 7/16”PH 2-1/2” BHN716
BPH716312 7/16”PH 3-1/2” BHN716
BPH12112 1/2”PH 1-1/2” BHN12
BPH12134 1/2”PH 1-3/4” BHN12
BPH12214 1/2”PH 2-1/4” BHN12
BPH12212 1/2”PH 2-1/2” BHN12
BPH123 1/2”PH 3” BHN12
BPH12312 1/2”PH 3-1/2” BHN12
BPH582 5/8”PH 2” BHN58
BPH58212 5/8”PH 2-1/2” BHN58
BPH583 5/8”PH 3” BHN58
Bolts and Nuts
1-800-568-439165
Special head boltsaredesignedtoconvert3/8”shankholestoaccommodate7/16”punchsweepsonfieldcultivators.Theseboltshavea7/16”headwith3/8”threadedbody.
Part # Description Length Nut part #BPH7163812 7/16”head3/8”body 1-1/2” BHN716
Special head boltsaredesignedtoconvert7/16”shankholestoaccommodate1/2”hole punchchiselspikesonchiselplows.Theseboltshavea1/2”headwith7/16”threadedbody.
Part # Description Length Nut part #BPH1276212 1/2”head7/16”body 2-1/2” BHN12
Elliptical head bolts are designed to fit Danish or “S” tine sweeps
Part # Description Length Nut part #BWK 3/8”EH 1-1/2” BHN38
Bolt kits are conveniently packaged with 50 bolts and flange nuts.
Part # Description Length BKP76112FN 7/16"Plowheadbolt 1-1/2”
BKP76134FN 7/16"Plowheadbolt 1-3/4”
Bolts and Nuts
1-800-568-439166
Hex head bolts used on SD225 and SD235 heavy duty chisel spikes, some bolt on subsoiler points, DT3 and CP65 dual tillage knives.
Part # Description Length Bolt part #BCS716212 7/16”Hexhead 2-1/2" BHN716
BCS12212 1/2”Hexhead 2-1/2" BHN12
Hex head nuts
Part # Description Thread directionBHN38 3/8” Righthand
BHN716 7/16” Righthand
BHHN716 7/16”Oversize Righthand
BWN716 7/16”Wiznut Righthand
BHN716L 7/16” Lefthand
BHN12 1/2” Righthand
BHHN12 1/2”Oversize Righthand
BHN12N 1/2”Nylock Righthand
BHN12L 1/2” Lefthand
BHN58 5/8” Righthand
BJN58 5/8”Jamnut Righthand
BHNM16 16mm Righthand
Transportation, Warranty and Terms of Sale
1-800-568-439167
Transportation Transportation of Wiese products will be F.O.B. Perry, Iowa on all items. Unless otherwise requested, all shipments will be prepaid by Wiese and freight charges will be added to the invoice.
If you prefer to arrange your own shipping, our products all ship class 60. The NMFC number is 011170-01. The description is Ag Parts-Iron. Once you have arranged for a freight company to pick up your order, the Bill of Lading and shipping label can be faxed to 515-465-9858 or e-mailed to your customer service representative.
During peak shipping seasons, please allow additional time due to heavy warehouse activity and increased shipping loads.
UPS and Spee-Dee orders received prior to 2:00 PM will be shipped by 2:00 PM the following day. Next-day air orders must be received no later than 10:00 AM to be shipped the same day. A $3.00 handling fee will be applied to each package shipped. Shipping is subject to available stock on hand.
Will-call pick-ups are available when specified at the time of order. The Wiese warehouse is located at 1561 3rd Street in Perry, Iowa. Warehouse hours for customer pick-up are Monday through Friday, 8:00 until 3:30 PM. Please notify customer service prior to arrival.
Transportation, Warranty and Terms of Sale
1-800-568-439168
Terms of sale
All sales are considered final upon receipt and payment for product. Return of any merchandise is totally at the discretion of Wiese Industries. Merchandise returned without a valid Return Authorization will NOT be accepted under any conditions.
Requests for a Return Authorization must meet the following conditions:
The return request must be made within 12 months following the invoice date.
Items must be of current design or style.
Customer must be under the ownership or management as sold to originally.
Items must be deemed non-sellable in the area.
All items will only be accepted in the original vendor units (carton of 6, bundle of 10 and so on).
A 15% restocking fee will apply.
Customers are responsible for freight on all returns.
No cash settlements will be issued.
Settlement of returned merchandise will be in the form of a credit issued toward future purchases.
The settlement amount is based upon the prices in effect at the time of purchase less any programs, trade discounts and restocking fees.
Transportation, Warranty and Terms of Sale
1-800-568-439169
WarrantyWiese Industries warrants products to be free from defects in material and workmanship if the products are used under normal circumstances and for their intended use. Products are also warranted to fit the implements for which they are designed and in connection with which they are intended to be used.Thisexpressedwarrantyshall,however,beeffectiveonlysolongaslessthan1/2inchofwearexists on the cutting edge of the product.
Disc and coulter blade warranty shall consist of:1/2inchwearoftheedgeonallbending,straightlinebreaksorcracks.Centerholebreakageand variegated breaks from edge will not be covered. Disc blades that have been altered by sharpening, rolling, drilling or hard-facing will not be covered.
Any product which is defective in material or workmanship will be replaced free of charge. All items claimed to be defective must be returned to or inspected by the manufacturer. This warranty does not extend to any item which has been changed or modified by anyone other than the manufacturer.
The express warranty descRibed herein, shall be in lieu of any other warranty, express or implied including but not limited to any implied warrant of merchantability for fitness for any particular purpose.
Oral statements about our products do not constitute warranties, shall not be relied upon by the buyer and are not part of this warranty. The entire warranty is embodied in this writing. This writing consti-tutes the final expression of the manufacturer warranty and is a complete and exclusive statement of the terms of that warranty.
Thepartiesagreethatthepurchasers’soleandexclusiveremedyforanydefectintheproductsshallbe for the repair or replacement of the product, or any part thereof pursuant to the terms of the express written warranty set forth herein. The purchaser agrees that no other remedy (including but not limited to incidental or consequential damages for lost profits, lost sales, injury to personal property, or any other incidental or consequential loss) shall be available to the purchaser.
Customer will be responsible for freight on returned merchandise until such merchandise is deemed defective. Freight charges will be credited on merchandise determined to be defective.
Top Related