Finishes for Interior Walls

PRODUCT BENEFITS

BEST IN CLASS

HIGH

MEDIUM

LOW

PRODUCT CODE 1058

Royale AspiraRoyale Aspira is the international gold standard in paints. Technologically, amongst one of the most advanced paints in the world; it is certified by global benchmarking institutions. When applied on walls, it imparts a soft sheen finish.

**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium

from April 2008.

On smooth primed masonary surface with brushing followed by sponge roller

OR 2 coats by felt roller

1 COAT240 - 260 sq.ft/ltr**

WASHABILITY COLOURS AVAILABLE COVERAGE

AVAILABLE PACKS FINISH

1 Ltrs 4 Ltrs 10 Ltrs 20 Ltrs

PAINT APPLICATION PROCESSPRE PAINTING STEPS

PLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.

FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints Crack Seal.

FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3

Royale Aspira should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

Refer to sheen levels in technical detailsShelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.

SOFT SHEEN

Enhanced Anti-microbial formula The Aspira anti-bacterial, anti-fungal formula retards microbial growth, thus creating a more hygienic and therefore, healthier living environment. It is certified by PRA Coatings Technology Centre, UK

Unmatched flame spread resistanceAspira packs enhanced fire safety, security properties. It has the distinction of the slowest flame spread rate in its category.Aspira has received the highest Class 1 rating from Exova Warringtonfire

Exceptional Crack Bridging PropertyAspira is an elastic film that stretches itself to almost 400%, covering up the hairline cracks and ensuring that they are not visible.

Environmentally ResponsibleThis product conforms to international VOC specifications and contains no hazardous raw materials like lead, heavy metals, APEO (Alkylphenol Ethoxylates) and toxic materials as per the

guidelines laid out by the International GS -11 (Green Seal) standard.

Unsurpassed water beading technologyWhen water comes in contact, it does not wet, penetrate, trickle, or spot. Instead, its hydrophobic nature forces water to roll down as little beads, just as a lotus leaf would do. That translates into is an easy to clean, smooth and highly durable painted surface.

Superior Stain ResistanceIt creates non-porous, high density surface that is almost stain phobic, which essentially means stains are prevented from penetrating to provide easy cleanup and maintenance.

5 year Perfromance warrantyAspira is the first product in India to offer a 5 year performance warranty for interiors. The warranty covers film integrity, protection against flaking or peeling, shade fading & fungus attack. It is a mark of reassurance from Asian Paints to the consumer who buys Royale Aspira.

1750+**Currently available in more than 1750 shades as per the Asian Paints Colour Spectra.

* 43 additional Le Corbusier shades available exclusively in Royale Aspira

PRODUCT FEATURES

HOW TO APPLY

WATER BASED

MATT HIGH GLOSSLOW SHEEN HIGH SHEEN 2 COATS130 - 140 sq.ft/ltr**

STEP 6SANDING

STEP 5 SELF PRIMING COAT OF ROYALE ASPIRA BRUSH / SPRAY / ROLLER

STEP 4SANDING

STEP 3 ACRYLIC WALL PUTTYPUTTY KNIFE

STEP 2 DECOPRIME WT OR ST PRIMERBRUSH / SPRAY

STEP 1 SANDING

STEP 7 FIRST COAT ROYALE ASPIRA ROLLERSTEP 8 SECOND COAT ROYALE ASPIRA ROLLER

BRUSH 15 - 20SPRAY 15 - 20

FELT ROLLER 24 - 40

BRUSH 30 - 40SPRAY 20 - 25

BASED ONREQUIREMENT

BRUSH 8 - 10SPRAY 15 - 20

1058

1354

03590360

1058

1058

4 - 6 HRS

4 - 6 HRSN/A

6 - 8 HRS

4 HRS

4 HRS

WATER

MTO*

WATER

WATER

WATER

ROLLER 30

ROLLER 30

FELT ROLLER 24 - 40

FELT ROLLER 24 - 40

WATER 100

SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN

SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN

SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN

APPLICATION CODE DILUTION % APPLICATION VISCOSITY1

RECOATING PERIOD

THINNER

1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.

* Mineral Turpentine Oil

Finishes for Interior Walls

ADDITIONAL INFORMATION

Browse through Asian Paints colour tools to help you find the right colour combination

COLOUR SPECTRA FAN DECK* COLOUR THEME BOOKROYALE ASPIRA SHADE CARD

VOC CONTENT

Asian Paints Royale Aspira meets the LEEDS VOC criteria and has been tested and benchmarked to GS11 standards for being VOC safe.

POST PAINTING CARE

TECHNICAL DETAILS

a. Drying time: Surface dry time 30 minb. Sheen levels: 5 - 15 at 60 deg GHc. Flash point IS101/1987 Part 1, Sec 6: NAd. Stability of thinned paint: To be used within 24 hours

PRECAUTIONS

Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.Application of Acrylic Wall Putty and adherence to the painting system is mandatory for best results and warranty coverage.

>

>>

>>

>

SAFETY FEATURES

Kindly refer to the MSDS for Asian Paints Royale Aspira which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds

>

>

>>>

>

>

>>

>>

HOW TO CHOOSE COLOURS

Versio

n No

. VN

01/07/2013

Version No. VN01/07/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India

*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference

The Golden rule for removing any wall stains is that one should remove it immediately.Remove all dirt using a clean cloth or duster. Always remove dirt from top to bottom, this helps in avoiding loose dirt to smudge the walls.For regular household stains like pencil, tea, coffee, crayons etc, use 5% soap/detergent solution. Use a sponge to remove the stains.In case of tough stains like turmeric, sketch pen, use a mild detergent solution (e.g Pril, Vim Liquid etc) for cleaning the stains.

>

>

>

>

ROYALE BOOK OF COLOURS