VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
Touch panel based wheel chair for handicapped persons
Abstract:
The present project deals embedded technology in industrial
/Hospitals management area. It is very useful and helpful for physically
challenged people .The present system working is very tedious process to
control the wheel chair by selecting mentioned path in touch panel.
This total procedure will be build up by using embedded system with
embedded technology. By using embedded technology we can control the
device.
Here we developed one touch technology, it is very useful in
industrial /Hospitals management by touch particular mention place of the
touch pad, touch specified place then enter to control the wheel chair speed
and direction.
Wheel chair speed and direction control through touch panel by
selecting the specified mentioned path in touch panel. By using this
technology we can give confidence to the physically challenged peoples to
move freely without help from nehibours.
The system uses a compact circuitry built around Flash version of
Atmel microcontroller with a non-volatile memory capable of retaining the
password data for over ten years. Programs are developed in embedded C.
ISP is used to dump the code into the microcontroller
This project uses regulated 5v, 750ma power supply. 7805 three
terminal voltage regulator is used for voltage regulation. Bridge type full
wave rectifier is used to rectify the ac output of secondary of 230/18v step
down transformer.
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
Block Diagram:
POWER SUPPLY:
Controller
Touch
panel
Motor
driver Wheel
chair
platform
POWER SUPPLY
RegulatorStep downtransformer
Rectifier Filter
Reset
LCD DISPLAY
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
Hardware Requirements:
Transmitter:
1. Microcontroller
2. Power supply
3. Touch panel
4. Max232
5. Lcd module
6. Motor driver
7. wheel chair platform
Software Requirements:
1. KEIL Software
2. RIDE Software
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
Advantages:
1. Low cost,
2. automated operation,
3. Low Power consumption.
Applications:
1. Hospitals
2. Industrial management
3. Home applications
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.INEMAIL:[email protected] CONTACT: 9448847874
Top Related