Ultra High Pressure .Hard Surface Cleaner
Smart cle a n ing .
A Nilfisk-Advance Brand
360 0 LED lightbar provides safe visibility and compliance
with airport regulations Cantilevered cab design provides
a direct line of sight with the /cleaning path fo r the operator
Easy access to t he engine compart me nt
The cleaning he ad's unique desig n Safe an d easy access to the cab. provides insta ntaneo us recovery Also, equi pped w ith a "jump seat"
w ithout the use of a vacuum fo r trai ning purposes
Fiberglass and composite siding provides durability
with a sound reducing, quality material
and critical systems
24 in / 61 cm paint removal head. No runoff and no surface damage.
40 inch (102 cm) rubber removal head. Unmatched cleaning with instantaneous recovery.
A Nilfisk-Advance Brand
Cyclone 4006 Ultra High Pressure Hard Surface Cleaner Innovative Design Deep Cleans with Environmental
Approach that Recovers Water and Debris The Advance Cyclo ne 4006 deep cleans outdoor surfaces more effecti vely and in less time than other methods. A patente d cleaning and recovery head aggressively cleans and removes buildup with no damage to the surface. Water and debris is recovered and separated , and nothing is left behind but a clean surface that dries quickly.
Over time, rubber buildup on airport runways can create a safety hazard. Advance's Cyc lone machines remove rubber marks from both grooved and smooth runways without damag ing the integrity of the surface, whether it's concrete or asphalt.
Painted lines are crit ical safety elements at airports and on highways and roadways. Advance's Cyc lone machines remove painted lines without damag ing the surface, leaving it clean, dry and ready for repainting. All of the water used for cleaning as well as the painted line debris are recovered, ensuring an environmentally friendly solution to painted line removal.
Ideal applications include:
• Runway Rubber Removal
• Paint Line Removal
• .Pavement Markings and Coatings Removal
40 in /102 cm rubber removal head uses less than 6 gpm / 22.71 - Ipm > 0 d ischarge 0 runoff .
Category 4 Cyclone storm within the cleaning heads for unmatched cleaning.
Cutting-edge technology cleans hard surfaces better than other
available methods
Water and debris recovery and separation provides an
environmentally-friendly cleaning solution
Cleaning without the use of a vacuum system reduces noise and
simplifies operation and maintenance
Single-engine configuration decreases maintenance requirements
and sound levels
Easy-to-use instruments and controls give the operator full command
of both the machine and cleaning
work from the comfort of
the high-visibility cab
Effortlessly
change from
rubber removal
to paint
removal in
minutes
Technical Specifications
I I
Model Cleaning Path (Rubber)
Cyclone 4006 33 in (83.82 cm) cast alumi num hous ing
I Cleaning Path (Paint) Var iabl e from 8 in (20.32 cm) t o 14 in (35.56 cm) cast iron or aluminum hou sing
I
Wat er Pump Positive Displacement Trip lex Plunger, wi t h fu ll pressurized lubricat ion, wa ter coo led 5.7 gallons per minute @ 40,000 psi 22.6 Umi n @ 2,758 bar
Cleaning Head Permanently mounted, hydraul ically controll ed, mu lt i pivot point maneuverability Cast aluminum housing, hydraul ically driven rotat ion, fibergl ass recovery t ank Belt -dr iven return pump. Stain less stee l u lt ra high pressure components 1,200 RPM creat e instantaneous recovery
I
I
Filtrat ion System Reclaim Tank (Rubber or Paint)
Inlet water fil t ered to 0.35 micron over 260 h ' of fi ltration Sand blaste d and powder coat ed stainl ess st eel. Separates wa te r f rom material 2,100 ga l (7,949 L) t otal capacity. Powered dump w ith powered door for easy maintenance
Wat er Tank 1,600 gal (6,000 L) corrosio n resistant fibergl ass Clean ing Att achments Gas powered, remote paint rem oval head up t o 300 ft (91 m) distance Steering Hydr aulic power steering Drive Joystick contro lled hydrostat ic dr ive Speeds 2 operati ng speeds and 1 transport speed var iabl e up to 18 mph (28.9 km/h) Controls Total sing le operato r controls f rom inside cab
Multifunctional ste ering column provides operat ion cont ro ls Contro l panel fo r joystick functions and full lighting cont rols
Brakes Air br akes, fr ont and rear automatica lly adjuste d 4 w heel drum brakes Fuel Tank 100 gal (379 L) total f uel capacity Chassis Frame Construction 10 in (2S.4 cm) x 3 in (7.62 cm) x V4 in (0.635 cm) wall cold roll ed stee l tub ing fr ame on a 23,000 Ib rear axle
and a 20,000 Ib front axle Power Plant Engine 9.0 L Pow er Tech Interim Tier 4/ Stage III B, 375 hp tu rboch arged liquid cooled diesel engi ne Weight 28,000 Ib (12,700 kg) - dry Dimensions L =30 ft (9.14 m) x W =8 ft (2.44 m) x H = 10 ft (3.05 m)
Specificat ions a re su bject to chan ge w it hout not ice.
Standard features:
• Designed Specifically for Airport Applications
• Exceptional Maneuverability
• Speed Infinitely Adjustable from 0 to 18 mph (29 km/h)
• Completely Self Contained One Person Operation
• Climate Controlled Cab
• Cantilevered Cab Design Provides Operator Direct Line-of-Sight View of Cleaning Path
• Remote Viewing Camera Gives Operator 360 Degree Visibility with No Blind Spots
• 2 Permanently Mounted Cyclone Cleaning Heads Switch from Rubber Removal to Paint Line Removal in Minutes
Ask about our leasing options. ©2011 Nilfisk-Ad vance, Inc. L3176A 11-10-11
• Only 1,600 Gallons/6,056 Liters of Water Required
• Onboard Recovery and Waste Separation
• Automatic Simultaneous Separation of Waste from Cleaning Water
• Recovery System Not Dependant on Surface Seal Eliminating Leakage or Runoff
• External Vacuum Source Not Required
• Surfaces Left Clean and Usable in Minutes
14600 21st Avenue North
Plymouth, MN 55447-3408
www.advance-cyclone.com
Phone 866-429-8175
Fax 800-989-6566
o recyclable
A Nilfisk-Advance Bran d
Top Related