PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
TRIAC S
The economical hand tool. Deployed worldwide and veryreliable, compact and robust.
- Adaptor tube with heat protection
- Electronic heating element protection
- Motor shut-off at minimal carbon level
- Multiple replacement of carbon brushes possible
- Suitable for continuous operation
SPECIFICATIONS
TRIAC S 42 V
Voltage V~ 42
Power consumption W 1000
Frequency Hz 50 / 60
Temperature °C 20 – 700
Air flow (20°C) l/min 230
Pressure static Pa ca. 3000 (30 mbar)
Noise emission level LpA dB 65
Size (L x ø) mm 340 x 90, handle Ø 56
Weight kg 1.4 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
TRIAC S 100 V
Voltage V~ 100
Power consumption W 1400
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 1/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Frequency Hz 50 / 60
Temperature °C 20 – 700
Air flow (20°C) l/min 230
Pressure static Pa ca. 3000 (30 mbar)
Noise emission level LpA dB 65
Size (L x ø) mm 340 x 90, handle Ø 56
Weight kg 1.4 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
TRIAC S 120 V
Voltage V~ 120
Power consumption W 1600
Frequency Hz 50 / 60
Temperature °C 20 – 700
Air flow (20°C) l/min 230
Pressure static Pa ca. 3000 (30 mbar)
Noise emission level LpA dB 65
Size (L x ø) mm 340 x 90, handle Ø 56
Weight kg 1.4 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
TRIAC S 200 V
Voltage V~ 200
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 2/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Power consumption W 1400
Frequency Hz 50 / 60
Temperature °C 20 – 700
Air flow (20°C) l/min 230
Pressure static Pa ca. 3000 (30 mbar)
Noise emission level LpA dB 65
Size (L x ø) mm 340 x 90, handle Ø 56
Weight kg 1.4 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
TRIAC S 230 V
Voltage V~ 230
Power consumption W 1600
Frequency Hz 50 / 60
Temperature °C 20 – 700
Air flow (20°C) l/min 230
Pressure static Pa ca. 3000 (30 mbar)
Noise emission level LpA dB 65
Size (L x ø) mm 340 x 90, handle Ø 56
Weight kg 1.4 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 3/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 4/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
ACCESSORIES
Tubular nozzle ø 5 mm push-fit on TRIAC PID / TRIAC S
100.303 - Tubular nozzle Ø 5 mm, push-fit
Sieve reflector 35 x 20 mm push-fit on TRIAC PID / TRIAC S
107.338 - Sieve reflector 35 x 20 mm, push-fit
Shell reflector 25 x 150 mm push-fit on Triac PID / Triac S and Diode PID / Diode S
107.326 - Shell reflector 25 x 150 mm, push-fit
Soldering reflector 17 x 34mm push-fit on TRIAC PID / TRIAC S
107.339 - Soldering reflector 17 x 34 mm, push-fit
High speed draw nozzle ø 3 mm / Ø 4 mm
113.666 - High speed draw nozzle Ø 3mm with tacking tip, screw on (without tacking tip onrequest)113.399 - High speed draw nozzle Ø 4mm with tacking tip, screw on (without tacking tip onrequest)
High speed draw nozzle 90-5.7 mm / 7 mm
113.670 - High speed draw nozzle 90 - 5.7 mm with tacking tip, screw on (without tacking tipon request)106.986 - Draw nozzle 7 mm, screw on
Tacking nozzle screw on Triac PID / Triac S, Diode PID / Diode S and WeldingPEN R / Welding PEN S
106.988 - Tacking nozzle screw on
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 5/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Tublar nozzle Ø 5 mm, screw on TRIAC PID / TRIAC S, DIODE PID / DIODE Sand WELDING PEN R / WELDING PEN S
105.622 - Tubular nozzle Ø 5 mm, screw on
Welding mirror 135 mm push-fit on TRIAC PID / TRIAC S and DIODE PID / DIODES
107.344 - Welding mirror 135 mm, push-fit
Wide slot nozzle 40 mm, push-fit on TRIAC PID, TRIAC S
107.132 - Wide slot nozzle 40 mm, push-fit
Wide slot nozzle ø 20 mm, push-fit on TRIAC PID, TRIAC S
107.123 - Wide slot nozzle 20 mm, push-fit
Wide slot nozzle 40 mm, PTFE coated push-fit on TRIAC PID / TRIAC S, DIODEPID / DIODE S
107.135 - Wide slot nozzle 40 mm, PTFE coated push-fit
Angled nozzle 20 mm, 90° push-fit on TRIAC PID / TRIAC S
107.124 - Angled nozzle 20 mm, 90°, push-fit
Angled nozzle 20 mm, 60° push-fit on TRIAC PID / TRIAC S
107.125 - Angled nozzle 20 mm, 60°, push-fit
Wide slot nozzle 60 mm push-fit on TRIAC PID / TRIAC S
107.129 - Wide slot nozzle 60 mm, push-fit
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 6/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Wide slot nozzle 40 mm, 60° bent push-fit on TRIAC PID / TRIAC S
107.130 - Wide slot nozzle 40 mm, 60° bent, push-fit
Wide slot nozzle 80 mm push-fit on TRIAC PID / TRIAC S
107.131 - Wide slot nozzle 80 mm, push-fit
Wide slot nozzle 40 mm, perforated push-fit on TRIAC PID / TRIAC S
107.133 - Wide slot nozzle 40 mm, perforated, push-fit
Sieve reflector 50 x 35 mm push-fit on TRIAC PID / TRIAC S
107.337 - Sieve reflector 50 x 35 mm, push-fit
Pressure roller 28 mm (PTFE), with ball bearings
106.976 - Pressure roller 28 mm (PTFE)with ball bearings
Pressure roller 28 mm (silicon), with ball bearings
106.977 - Pressure roller 28 mm (silicon), with ball bearings
One-arm pressure roller 40 mm, with ball bearings (silicon)
106.975 - One-arm pressure roller 40 mm, with ball bearings (silicon)
Customs seal roller, with ball bearings
106.981 - Customs seal roller, with ball bearings
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 7/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Pressure roller with ball bearings (brass), with ball bearings
106.972 - Pressure roller with ball bearings (brass), with ball bearings
Tacking nozzle push-fit on tubular nozzle ø 5 mm
106.996 - Tacking nozzle, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle 4.5 x 12mm for fillet seams
107.139 - Speed welding nozzle 4.5 x 12mm for fillet seams, push-fit on tubular nozzle ø5mm
Speed welding nozzle 5.7, 7 mm push-fit on tubular nozzle Ø 5 mm
106.992 - Speed welding nozzle 5.7 mm, push-fit on tubular nozzle Ø 5 mm106.993 - Speed welding nozzle 7 mm, push-fit on tubular nozzle Ø 5 mm
Speed welding nozzle for tape 8 mm push-fit on tubular nozzle Ø 5mm
107.137 - Speed welding nozzle for tape 8 mm, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle with small air-slide, push-fit on Tubular nozzle ø 5mm
105.431 - Speed welding nozzle 3 mm, small air-slide, push-fit on tubular nozzle Ø 5 mm105.432 - Speed welding nozzle 4 mm, small air-slide, push-fit on tubular nozzle Ø 5mm105.433 - Speed welding nozzle 5 mm, small air-slide, push-fit on Tubular nozzle Ø 5 mm
Speed welding nozzle 3, 4, 5 mm push-fit on tubular nozzle Ø 5 mm
106.989 - Speed welding nozzle 3 mm, push-fit on tubular nozzle Ø 5 mm106.990 - Speed welding nozzle 4 mm push-fit, on tubular nozzle Ø 5 mm106.991 - Speed welding nozzle 5 mm, push-fit on tubular nozzle Ø 5 mm
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 8/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > TRIAC S
Sieve reflector 12 x 10 mm push-fit on tubular nozzle Ø 5mm
107.324 - Sieve reflector 12 x 10 mm, push-fit on tubular nozzle Ø 5mm
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > TRIAC S | Page 9/9
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > HOT JET S
HOT JET S
The world’s smallest hand tool. Quiet and handy.
- Worldwide the smallest hand tool
- Electronic steplessly controlled temperature
- Electronic steplessly controlled air flow
- Electronic heating element protection
- Low noise
- Integrated flexible tool stand
SPECIFICATIONS
HOT JET S 100 V
Voltage V~ 100
Power consumption W 460
Frequency Hz 50 / 60
Temperature °C 20 – 600
Air flow (20°C) l/min 20 – 80
Pressure static Pa max. 1600 (16 mbar)
Noise emission level LpA dB 59
Size (L x ø) mm 235 x 70, handle Ø 40
Weight kg 0.6 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
HOT JET S 120 V
Voltage V~ 120
Power consumption W 460
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > HOT JET S | Page 1/5
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > HOT JET S
Frequency Hz 50 / 60
Temperature °C 20 – 600
Air flow (20°C) l/min 20 – 80
Pressure static Pa max. 1600 (16 mbar)
Noise emission level LpA dB 59
Size (L x ø) mm 235 x 70, handle Ø 40
Weight kg 0.6 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
HOT JET S 230 V
Voltage V~ 230
Power consumption W 460
Frequency Hz 50 / 60
Temperature °C 20 – 600
Air flow (20°C) l/min 20 – 80
Pressure static Pa max. 1600 (16 mbar)
Noise emission level LpA dB 59
Size (L x ø) mm 235 x 70, handle Ø 40
Weight kg 0.6 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > HOT JET S | Page 2/5
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > HOT JET S
ACCESSORIES
Tubular nozzle ø 5 mm push-fit on HOT JET S, LE MINI, LE MINI SENSOR
107.144 - Tubular nozzle Ø 5 mm, push-fit
Wide slot nozzle 20 mm push-fit on HOT JET S
107.142 - Wide slot nozzle 20 mm, push-fit
Sieve reflector 35 x 20 mm push-fit on HOT JET S
107.310 - Sieve reflector 35 x 20 mm, push-fit
Spoon reflector 25 x 30 mm push-fit on HOT JET S
107.312 - Spoon reflector 25 x 30 mm, push-fit
Sieve reflector 50 x 35 mm push-fit on HOT JET S
107.311 - Sieve reflector 50 x 35 mm, push-fit
Pressure roller 28 mm (PTFE), with ball bearings
106.976 - Pressure roller 28 mm (PTFE)with ball bearings
Pressure roller 28 mm (silicon), with ball bearings
106.977 - Pressure roller 28 mm (silicon), with ball bearings
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > HOT JET S | Page 3/5
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > HOT JET S
One-arm pressure roller 40 mm, with ball bearings (silicon)
106.975 - One-arm pressure roller 40 mm, with ball bearings (silicon)
Customs seal roller, with ball bearings
106.981 - Customs seal roller, with ball bearings
Pressure roller with ball bearings (brass), with ball bearings
106.972 - Pressure roller with ball bearings (brass), with ball bearings
Tacking nozzle push-fit on tubular nozzle ø 5 mm
106.996 - Tacking nozzle, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle 4.5 x 12mm for fillet seams
107.139 - Speed welding nozzle 4.5 x 12mm for fillet seams, push-fit on tubular nozzle ø5mm
Speed welding nozzle for tape 8 mm push-fit on tubular nozzle Ø 5mm
107.137 - Speed welding nozzle for tape 8 mm, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle with small air-slide, push-fit on Tubular nozzle ø 5mm
105.431 - Speed welding nozzle 3 mm, small air-slide, push-fit on tubular nozzle Ø 5 mm105.432 - Speed welding nozzle 4 mm, small air-slide, push-fit on tubular nozzle Ø 5mm105.433 - Speed welding nozzle 5 mm, small air-slide, push-fit on Tubular nozzle Ø 5 mm
Speed welding nozzle 3, 4, 5 mm push-fit on tubular nozzle Ø 5 mm
106.989 - Speed welding nozzle 3 mm, push-fit on tubular nozzle Ø 5 mm106.990 - Speed welding nozzle 4 mm push-fit, on tubular nozzle Ø 5 mm106.991 - Speed welding nozzle 5 mm, push-fit on tubular nozzle Ø 5 mm
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > HOT JET S | Page 4/5
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > HOT JET S
Speed welding nozzle 5.7, 7 mm push-fit on tubular nozzle Ø 5 mm
106.992 - Speed welding nozzle 5.7 mm, push-fit on tubular nozzle Ø 5 mm106.993 - Speed welding nozzle 7 mm, push-fit on tubular nozzle Ø 5 mm
Sieve reflector 12 x 10 mm push-fit on tubular nozzle Ø 5mm
107.324 - Sieve reflector 12 x 10 mm, push-fit on tubular nozzle Ø 5mm
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > HOT JET S | Page 5/5
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
DIODE S
Handy and powerful welding tool with steplessly adjustablewelding temperature and external air supply.
- Electronic temperature control
- Overheating protection for heating elements
- Adaptor tube with heat protection
- Push-fit and screw-on nozzles for round and profile welding rods
- Air supply provided by the ROBUST or MINOR blowers
- Suitable for mobile assembling applications when connected to theMINOR blower
SPECIFICATIONS
DIODE S 42 V
Voltage V~ 42
Power consumption W 600
Frequency Hz 50/60
Temperature °C 20 – 600
Min. Air flow (20° C) l/min 40
Pressure dynamic Pa max. 105 (1000 mbar)
Size (L x ø) mm 265 x 57, handle Ø 40
Weight kg 1.15 (with 3 m cord/3 m air hose)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
DIODE S 100 V
Voltage V~ 100
Power consumption W 1400
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 1/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Frequency Hz 50/60
Temperature °C 20 – 600
Min. Air flow (20° C) l/min 40
Pressure dynamic Pa max. 105 (1000 mbar)
Size (L x ø) mm 265 x 57, handle Ø 40
Weight kg 1.15 (with 3 m cord/3 m air hose)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
DIODE S 120 V
Voltage V~ 120
Power consumption W 1600
Frequency Hz 50/60
Temperature °C 20 – 600
Min. Air flow (20° C) l/min 40
Pressure dynamic Pa max. 105 (1000 mbar)
Size (L x ø) mm 265 x 57, handle Ø 40
Weight kg 1.15 (with 3 m cord/3 m air hose)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
DIODE S 230 V
Voltage V~ 230
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 2/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Power consumption W 1600
Frequency Hz 50/60
Temperature °C 20 – 600
Min. Air flow (20° C) l/min 40
Pressure dynamic Pa max. 105 (1000 mbar)
Size (L x ø) mm 265 x 57, handle Ø 40
Weight kg 1.15 (with 3 m cord/3 m air hose)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 3/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
ACCESSORIES
Pressure roller 28 mm (PTFE), with ball bearings
106.976 - Pressure roller 28 mm (PTFE)with ball bearings
Pressure roller 28 mm (silicon), with ball bearings
106.977 - Pressure roller 28 mm (silicon), with ball bearings
One-arm pressure roller 40 mm, with ball bearings (silicon)
106.975 - One-arm pressure roller 40 mm, with ball bearings (silicon)
Customs seal roller, with ball bearings
106.981 - Customs seal roller, with ball bearings
Pressure roller with ball bearings (brass), with ball bearings
106.972 - Pressure roller with ball bearings (brass), with ball bearings
Tacking nozzle push-fit on tubular nozzle ø 5 mm
106.996 - Tacking nozzle, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle 4.5 x 12mm for fillet seams
107.139 - Speed welding nozzle 4.5 x 12mm for fillet seams, push-fit on tubular nozzle ø5mm
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 4/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Speed welding nozzle for tape 8 mm push-fit on tubular nozzle Ø 5mm
107.137 - Speed welding nozzle for tape 8 mm, push-fit on tubular nozzle Ø 5mm
Speed welding nozzle with small air-slide, push-fit on Tubular nozzle ø 5mm
105.431 - Speed welding nozzle 3 mm, small air-slide, push-fit on tubular nozzle Ø 5 mm105.432 - Speed welding nozzle 4 mm, small air-slide, push-fit on tubular nozzle Ø 5mm105.433 - Speed welding nozzle 5 mm, small air-slide, push-fit on Tubular nozzle Ø 5 mm
Speed welding nozzle 3, 4, 5 mm push-fit on tubular nozzle Ø 5 mm
106.989 - Speed welding nozzle 3 mm, push-fit on tubular nozzle Ø 5 mm106.990 - Speed welding nozzle 4 mm push-fit, on tubular nozzle Ø 5 mm106.991 - Speed welding nozzle 5 mm, push-fit on tubular nozzle Ø 5 mm
High speed draw nozzle ø 3 mm / Ø 4 mm
113.666 - High speed draw nozzle Ø 3mm with tacking tip, screw on (without tacking tip onrequest)113.399 - High speed draw nozzle Ø 4mm with tacking tip, screw on (without tacking tip onrequest)
Hose clamp for air hose ø 14 mm
101.031 - Hose clamp for air hose Ø 14 mm
Wide slot nozzle ø 20 mm, push-fit on TRIAC PID, TRIAC S
107.123 - Wide slot nozzle 20 mm, push-fit
Wide slot nozzle 40 mm, push-fit on TRIAC PID, TRIAC S
107.132 - Wide slot nozzle 40 mm, push-fit
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 5/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Wide slot nozzle 40 mm, PTFE coated push-fit on TRIAC PID / TRIAC S, DIODEPID / DIODE S
107.135 - Wide slot nozzle 40 mm, PTFE coated push-fit
Tacking nozzle screw on Triac PID / Triac S, Diode PID / Diode S and WeldingPEN R / Welding PEN S
106.988 - Tacking nozzle screw on
Air hose ø 14 mm for Diode PID / Diode S and Welding PEN R / Welding PEN S
101.681 - Air hose Ø 14 mm
Tubular nozzle ø 5 mm push-fit on TRIAC PID / TRIAC S
100.303 - Tubular nozzle Ø 5 mm, push-fit
Tublar nozzle Ø 5 mm, screw on TRIAC PID / TRIAC S, DIODE PID / DIODE Sand WELDING PEN R / WELDING PEN S
105.622 - Tubular nozzle Ø 5 mm, screw on
Shell reflector 25 x 150 mm push-fit on Triac PID / Triac S and Diode PID / Diode S
107.326 - Shell reflector 25 x 150 mm, push-fit
Welding mirror 135 mm push-fit on TRIAC PID / TRIAC S and DIODE PID / DIODES
107.344 - Welding mirror 135 mm, push-fit
High speed draw nozzle 90-5.7 mm / 7 mm
113.670 - High speed draw nozzle 90 - 5.7 mm with tacking tip, screw on (without tacking tipon request)106.986 - Draw nozzle 7 mm, screw on
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 6/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Wide slot nozzle 40 mm, perforated push-fit on TRIAC PID / TRIAC S
107.133 - Wide slot nozzle 40 mm, perforated, push-fit
Wide slot nozzle 60 mm push-fit on TRIAC PID / TRIAC S
107.129 - Wide slot nozzle 60 mm, push-fit
Wide slot nozzle 80 mm push-fit on TRIAC PID / TRIAC S
107.131 - Wide slot nozzle 80 mm, push-fit
Soldering reflector 17 x 34mm push-fit on TRIAC PID / TRIAC S
107.339 - Soldering reflector 17 x 34 mm, push-fit
Speed welding nozzle 5.7, 7 mm push-fit on tubular nozzle Ø 5 mm
106.992 - Speed welding nozzle 5.7 mm, push-fit on tubular nozzle Ø 5 mm106.993 - Speed welding nozzle 7 mm, push-fit on tubular nozzle Ø 5 mm
Sieve reflector 12 x 10 mm push-fit on tubular nozzle Ø 5mm
107.324 - Sieve reflector 12 x 10 mm, push-fit on tubular nozzle Ø 5mm
Sieve reflector 35 x 20 mm push-fit on TRIAC PID / TRIAC S
107.338 - Sieve reflector 35 x 20 mm, push-fit
Sieve reflector 50 x 35 mm push-fit on TRIAC PID / TRIAC S
107.337 - Sieve reflector 50 x 35 mm, push-fit
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 7/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > DIODE S
Angled nozzle 20 mm, 60° push-fit on TRIAC PID / TRIAC S
107.125 - Angled nozzle 20 mm, 60°, push-fit
Angled nozzle 20 mm, 90° push-fit on TRIAC PID / TRIAC S
107.124 - Angled nozzle 20 mm, 90°, push-fit
Wide slot nozzle 40 mm, 60° bent push-fit on TRIAC PID / TRIAC S
107.130 - Wide slot nozzle 40 mm, 60° bent, push-fit
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > DIODE S | Page 8/8
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > MINOR
MINOR
Powerful blower for DIODE PID and DIODE S.
- Lightweight and compact
- Powerful
- Mobile air supply for Leister welding machines
SPECIFICATIONS
MINOR 42 V
Voltage V~ 42
Power consumption W 100
Frequency Hz 50 / 60
Air flow (20°C) l/min 400
Pressure static Pa 4000
Noise emission level LpA dB 67
Outlet opening (outside) mm 14.5
Size (L x ø) mm 250 x 95, handle Ø 64
Weight kg 1.15 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
MINOR 120 V
Voltage V~ 120
Power consumption W 100
Frequency Hz 50 / 60
Air flow (20°C) l/min 400
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > MINOR | Page 1/3
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > MINOR
Pressure static Pa 4000
Noise emission level LpA dB 67
Outlet opening (outside) mm 14.5
Size (L x ø) mm 250 x 95, handle Ø 64
Weight kg 1.15 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
MINOR 230 V
Voltage V~ 230
Power consumption W 100
Frequency Hz 50 / 60
Air flow (20°C) l/min 400
Pressure static Pa 4000
Noise emission level LpA dB 67
Outlet opening (outside) mm 14.5
Size (L x ø) mm 250 x 95, handle Ø 64
Weight kg 1.15 (with 3 m cord)
Marking of conformity
Approval mark
Certification scheme CCA
Protection class II
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > MINOR | Page 2/3
PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
Plastic Welding > Hand tools > MINOR
ACCESSORIES
www.leister.comLeister Process TechnologiesRiedstrasseCH-6060 Sarnen/Switzerland
Phone: +41 41 662 74 74Fax: +41 41 662 74 [email protected] Plastic Welding > Hand tools > MINOR | Page 3/3
Top Related