Please note: Specifications are subject to change without notice. It is the responsibility of the installer to check the measurements of the physical product before installation
NZ ASSEMBLED •TESTED •
DESIGNED •
KIWI OWNED COMPANY
9 Saunders Place, Avondale, Auckland. Tel: 09-828 2068, Fax: 09-828 2069Email: [email protected] or visit our website:
www.aquatica.co.nz
Aquatica NZ Limited
© copyright Aquatica 2019
Basin Mixer
Techline
Code:
Finish:
Spout:
Mounting Hardware:
Cartridge:
Water Inlet:
Water Outlet:
Stainless Steel Inlet Hoses:
Chrome
M24 ring with flow guide fitted and PCA supplied
TL BASM
Hot: Size: M10 x 1/2” BSP
Cold: Size: M10 x 1/2” BSP
Dress Ring supplied with O-ring seal
Stud: 2 x 6mm Nut: 2 x 9mm A/F Horseshoe Washer
35k Flat base
Fixed
Installation Hole Diameter: Minimum: 32mm Maximum: 37mm
Flow: Supplied flow guide fitted for max flow at low pressure
7 ℓ/min PCA supplied for regulated flow with mains pressure system
Max hot @ 35 kPa = 6.2 ℓ/min
50.00
96.00
131.00
124.00
53.00
When tested in accordance with AS/NZS 6400
Mains Pressure
Water Consumption
litres per minute
7.5
WATERRATING
The morestars the morewater efficient
www.waterefficiency.govt.nz
When tested in accordance with AS/NZS 6400
Water Consumption
litres per minute
WATERRATING
The morestars the morewater efficient
www.waterefficiency.govt.nz
Low Unequal Pressure/
Suitable for all pressure
Recommended Operational Pressure Range: 35 - 600 kPa
Never to Exceed: 1000 kPaMaximum Operating Temp: 80°C
Top Related