Titan Profile
Inclination
2. Cover hinge closely and adjust inclination into requested direction on titanium side part
1. Hold lens fixation firmly
Inclinate here
REDUCE ENLARGE
Temple Opening
1. Hold lens fixation firmly 2. Close temple by 45°
Temple Disassembly
3. Press cylinder out of SNAP-hinge. Apply pressure right beside hinge.
4. ATTENTION: Never bend temple
Temple Assembly
1
2
3
4
Turn temple forward by 180°
Bring temple into correct position again
Curve temple in large movements. Do not bend!
Temple Curving
Slide Number 1InclinationTemple OpeningTemple DisassemblyTemple AssemblySlide Number 6
Top Related