Timber Derivatives- Manufactured Boards
Product design
Manufactures boards
Manufactured boards are now extensively used in industry and in the home. These relatively new materials are known as composites. Generally, these materials are manufactured using natural timber in thin sheets or particles, which are bonded with a resin, compressed and heated.
These products are environmentally friendly because they are often produced from waste products such as sawdust, bark and off-cuts.
Advantages & Disadvantages
Advantages cheap stable (in warm, centrally-heated environments) thin veneers of expensive timbers can be used as top, decorative layers boards are available in large sheets (1220 x 2240 and 1550 x 1550)
Disadvantages edges require ‘facings’ repair and maintenance can be difficult
Common Manufactured Boards
Name Composition Properties andworkingcharacteristics
Uses
Plywood Thin veneers, cross-laminated using anodd number of layers
Stable, strongand easy tomachine
Furniture, joinery,Constructionwork
Blockboard 25mm strips gluedtogether and facedwith ply
Stiff and heavy,good load-bearingcapabilities
Furniture,worktops, veneergroundwork
Hardboard Highly compresseswood fibres
Cardboard-like,weak and brittle
Low-costfurniture parts,e.g. cabinetsbacks, drawerbottoms
Common Manufactured Boards
Name Composition Properties andCharacteristics
Uses
MDF ( MediumDensityFibreboard)
Compressedwood fibres
Easily machined,moulded andpainted
Generalcarcass/paintedwork, veneerground
Chipboard Compressedwood chips
Stiffness andstrength vary withdensity
Furniturecarcassing, goodveneer ground
Plywood
Plywood is made from layers or plies of wood glued together.
The grain of each ply is laid at right angles to the next.
This makes the ply strong in both directions
Plywood is ideal for lightweight box construction, cabinet backs and drawer bottoms
Blockboard These boards are made
by sandwiching strips of softwood between two plies.
The outer faces of veneer have the grain running at right angles to the strips.
Ideal for furniture and worktops
Hardboard Hardboard is made by
mixing wood fibres together with water and resin glue and hot pressing into sheets.
Hardboard is not very strong and is usually supported on timber frames
Ideal for low-cost furniture parts e.g. drawer bottoms
MDF MDF is manufactured in a
similar way to hardboard but is compressed under greater pressure and is therefore much stronger.
MDF is cheap, strong and is easily shaped and finished.
Ideal for all types of furniture making and interior joinery
Chipboard Chipboard is made by gluing
chips of wood together under heat and pressure.
Standard sheet size is 1220mm x 2440mm. Common thickness is 18mm.
Veneers and plastic laminate faced chipboard is widely used for worktops, shelves and furniture making
Questions
Why are manufactured boards environmentally friendly? State two advantages of man-made boards State two disadvantages of man-made boards Name four manufactured boards and their properties State one usage for six different man-made boards
Top Related