NEWSLETTER
Issue no. 15/1
This issue highlights the many areas of science and industry in which vacuum plays a major role. One example is shown below; others are cited in the Chair’s Report. Please take a look and, if some of these areas are of interest to you, why not join the Vacuum Group. Contact Ms Anne Crean ([email protected])
JULY 2015
The Versatile Electron Linear Accelerator (VELA): a new facility which will deliver a capability for the cutting edge development and qualification of advanced accelerator systems, enabling industry to expedite their development from prototypes to market-ready products. (photo courtesy of Laura Bennett and Stuart Eyres ,Media Services, STFC Daresbury Laboratory)
VACUUM Group newsletter July 2015
Page 2
Contents Chair’s report 2015……………………………………………………. 3
IOP Research student conference fund…………………………….. 4
Annual General Meeting of the Vacuum Group……………………. 5
Vacuum Symposium UK……………………………………………… 5
Programme for 6th Vacuum Symposium……………………………. 6
Report on 5th Vacuum Symposium 2013…………………………… 8
Harry Leck Memorial Medal………………………………………….. 9
Report on the Early Career researchers’ meeting on
“Plasmas, Surfaces and Thin Films”…………………………………
10
2014 and 2015 Vacuum Group Poster Prize Winners and their
reports…………………………………………………………………...
13
Mitigation of particles from sputter-ion pumps……………………… 17
The British Vacuum Council………………………………………….. 20
Forthcoming events……………………………………………………. 21
Group committee………………………………………………………. 21
VACUUM Group newsletter July 2015
Page 3
Chair’s Report 2015
When you talk to colleagues in other disciplines you often get the response
“there is not much new in vacuum these days”. The correct answer is
“‘nothing’ is further from the truth”. Vacuum processing is essential in the
food industry (freeze drying) with challenges not only to remove water vapour
but also to provide the sterile environment essential in food processing. Then
there is the electronics industry with ion implantation providing the precise
doping levels to produce electronic devices and, in addition, the vacuum
coating industry offers improved performance and lifetime of many
engineering tools. As I mentioned last year the new kilogram mass standard
will soon be based on a force measurement in a vacuum environment. And
what about particle accelerators, fusion systems, thin film solar cells, smart
coated windows, sensors, vacuum-insulated panels for buildings? Our Sixth
Vacuum Symposium on “Challenges in Vacuum Technology” at the Ricoh
Arena on 14th October this year will look at developments and problems in
some of these many areas of application of vacuum.
We look for IOP members in all the above areas to join the group committee
and to feed in ideas for possible meetings to cover this vast array of vacuum-
related applications. Even if not on the committee please send your ideas to
our Honorary Secretary, Saim Memon, for topics for meetings and talks.
In the past year we joined other groups to run an early-career researcher 1
day conference in Loughborough. This was attended by over 50 delegates
and, after an excellent overview of the status of JET by Dr Guy Matthews
from the Culham Centre for Fusion Energy, there were many interesting
papers presented by these early-career scientists. The event included a well-
supported poster session.
I would like to thank my fellow officers and members of the committee for
their interest and support over the past year. I have been on the committee
for several years now and feel it is time to stand down so I will leave the
committee at our AGM which takes place at 1200hrs following the VS6
morning session in the Ricoh Arena, Coventry. All group members are
welcome so please try to come along.
John Colligon
6th July 2015
VACUUM Group newsletter July 2015
Page 4
IOP Research Student Conference Fund
The Institute of Physics provides financial support to research students to
attend international meetings and major national meetings.*
The Institute of Physics (IOP) handles the application process but it is the
relevant IOP group that makes the decision on whether to award the bursary
and its value.
Am I eligible?
Research Student Conference Fund (RSCF) bursaries are available to PhD
students who are a member of the Institute and of an appropriate Institute
group. For example, if an applicant is a member of the Women in Physics
Group only then they could only seek support to attend a conference related
to women in physics and not to low temperature physics. To be eligible for
that meeting, the applicant would also need to be a member of the Low
Temperature Group.
What is the bursary worth?
Students may apply for up to £300 during the course of their PhD. Students
may apply more than once, for example they may request the full amount or
decide to request a smaller amount and then apply for funding again for
another conference at a later stage.
Note that grants will normally cover only part of the expenses incurred in
attending a conference and are intended to supplement grants from other
sources.
How can I apply?
Application details and application form (Word, 85 KB)
(http://www.iop.org/about/grants/research_student/file_38809.doc)
RSCF applications are considered on a quarterly basis and should reach the
Institute by: 1 March, 1 June, 1 September or 1 December; a decision will be
made within eight weeks of the closing date. Your application must reach us
by the deadline which is at least three months before the conference you
wish to attend. We strongly recommend that you submit your application
early.
All recipients are asked to produce a report on return from their conference
before receiving payment.
VACUUM Group newsletter July 2015
Page 5
Further information
For further information please contact [email protected].
* Please note that bursaries are not available for meetings organised by the
Institute of Physics including those organised by IOP Groups.
Annual General Meeting (AGM) of the Vacuum Group
This meeting will take place on 14th October 2014 at 1200 hrs after the first
lecture of the afternoon session at the Ricoh Arena, Phoenix Way, Coventry
CV6 6GE. All members and observers are welcome.
The composition of the Group Committee should reflect the broad coverage
of the subject, encompassing academics, representatives of vacuum
manufacturers and vacuum users in government and industrial laboratories.
We are always looking for new members to serve on the Committee which
normally meets 3 times per annum. At these meetings we plan our events
programme for the year ahead and rely on committee members to suggest
new themes and help with the planning and running of new topical scientific
seminars and meetings.
Please contact Saim Memon ([email protected]) well before 14th
October if you would like to stand for election.
Vacuum Symposium UK
Vacuum Symposium UK was formed to embrace all of the UK vacuum community. Its aim is to bring together academics, industrialists, engineers, manufacturers and anyone using vacuum to promote UK pre-eminence in the subject.
Vacuum is a key enabling technology for a wide variety of applications that are of growing importance in the 21st Century. Whilst there is an abundance of information on the Internet we believe that the annual event organised by Vacuum Symposium UK provides a unique opportunity for networking and education, in addition to topical meetings of interest to vacuum users.
The meetings within Vacuum Symposium UK are free to attend. We welcome anyone with experience and contacts to organise a vacuum related
VACUUM Group newsletter July 2015
Page 6
meeting that will attract and interest the diverse spectrum of vacuum users. See our website www.vacuum-uk.org for more details.
The Vacuum Symposium event is co-located with Vacuum Expo – the UK’s premier exhibition of vacuum equipment – all on one site, under one roof. Attendees are welcome on one or both days of the event – this year it will be held at the Ricoh Arena, Coventry on 14th and 15th October.
Vacuum Symposium UK is an independent organisation (Registered Charity No. 1137989). Our roots were based in the RGA User Group but nowadays we seek to encompass all aspects of vacuum with a view to establishing a UK annual event worthy of hosting an International vacuum conference.
Steve Shannon SS Scientific Limited
ANNOUNCEMENT: 6th Vacuum Symposium and VacuumEXPO
Ricoh Arena, Coventry; 14-15 October 2015
Emerging Technologies in Vacuum Science
We have an excellent programme of speakers from UK and overseas,
selected with the help and support of five IOP groups (Ion and Plasma
Surface Interactions, Nano-scale Physics and Technology, Materials and
Characterisation, Thin Films and Surfaces and Vacuum).
Emerging Technologies in Vacuum Science, Coventry 14th October 2015
Programme for 6th Vacuum Symposium
0920 Welcome and Introduction
John Colligon
SESSION 1: Chair Alison Crossley
0930 Near-ambient pressure x-ray photoelectron spectroscopy
Joachim Schnadt
Department of Physics, Lund University, Lund, Sweden
Analytic microscopy of superconducting materials
Susannah Speller
Department of Materials, University of Oxford, Oxford, UK
1030 Tea/Coffee in Exhibition area
VACUUM Group newsletter July 2015
Page 7
SESSION 2: Chair, James O’Shea
1100 The He spin echo spectrometer and the scanning He atom microscope
Holly Hedgeland
University College London, London, UK
1130 UHV atomic force microscopy and development of a new understanding of the atomic resolution AFM imaging of molecules
Adam Sweetman
School of Physics & Astronomy, University of Nottingham, Nottingham, UK.
1200 In-vacuum realisation of the new definition of the kilogram
Stuart Davidson
National Physical Laboratory, UK
1230 Vacuum Group Annual General Meeting (AGM), Exhibition and Lunch Break
SESSION 3: Chair, Steven Schofield
1400 Phase change material opto-electro-mechanics
Harish Bhaskaran
Materials Department, University of Oxford, Oxford, UK
1430 Photocatalytic thin films
Glen West
Manchester Metropolitan University, Manchester, UK
1500 Ultra-high vacuum compatible electrospray ion beam deposition for the deposition of complex, fragile and non-volatile molecules on surfaces in vacuum
James N. O’Shea
School of Physics and Astronomy, The University of Nottingham, Nottingham, UK
1530 Symposium ends. Exhibition continues
VACUUM Group newsletter July 2015
Page 8
Report on the 5th Vacuum Symposium, Ricoh Arena, Coventry; 15th Oct 2014
Surface Modification and Analysis
This meeting, held on 15th October 2014 at the Ricoh Arena, Coventry, was
jointly organised by five Institute of Physics groups (“Ion and Plasma Surface
Interactions”, “Materials and Characterisation”, “Nanoscale Physics and
Technology”, “Thin Films and Surfaces” and “Vacuum”). Invited Speakers
from National Research Laboratories and Universities in the UK, Germany
and Austria presented latest information on many aspects of surface
modification and analysis. Contributions on surface modification covered
atomic layer deposition with plasma-assistance to form dielectric layers in
high electron mobility transistors, power electronic devices and solar cells,
coatings inside vacuum tubes to provide pumping and low electron-emission
surfaces and manipulation of atoms such as hydrogen on a surface to control
the action of a functional molecule. Developments in analytical methods
included measurement techniques to determine mechanical properties of a
multilayer or multi-component system, measurement of biomolecular interface
properties of importance in the performance of nanoparticle drug delivery
products, improved interpretation methods for interpretation of scanning
tunnelling data, modified tips and frequency modulation in atomic force
microscopy to bring resolution to the pico-meter scale and an in-air particle-
induced x-ray emission analysis technique which has provided data allowing
reconstruction of the original image in a old stained-glass window. In
addition, a talk tracing latest modelling methods of film deposition by
energetic particles was given combining molecular dynamics and the so-
named “on-the-fly” Monte Carlo technique. Several videos illustrating the
predicted growth modes of films were shown and it is clear that such models
offer an important insight into the influence of deposition parameters on film
growth.
The meeting attracted over 60 delegates who also enjoyed the equipment
exhibition during the refreshment and extended luncheon breaks. Several
Poster presenters gave a 2 minute presentation on their work at the end of
the main morning session. The annual Vacuum Group poster prize was
presented in the exhibition area. The 2014 prize was won by Holly Hedgeland
for her poster on “Quantum States and Molecular Structures on Silicon”
Thanks are due to all speakers and to Sue Waller and Marie White from
STFC Daresbury who prepared the booklets and dealt with the registration.
We also acknowledge and thank all the Exhibitors and STFC whose support
VACUUM Group newsletter July 2015
Page 9
for the event allowed delegates to attend this scientific meeting free of
charge.
John Colligon
Surface Coatings and Characterisation
School of Computing and Engineering
The University of Huddersfield
Huddersfield HD1 3DH, UK
Harry Leck Memorial Medal
Each year the organising committee of Vacuum Symposium UK seeks
nominations for the Harry Leck Memorial Medal. The Medal is awarded for
distinguished contributions to British scientific research and/or related
scientific/technical communities, in the field of Vacuum Science and
Technology.
The medal has been established to honour the memory of Professor John
Henry Leck, known to his friends as ‘Harry’.
Procedure
To nominate somebody for this award please fill in the ‘Nomination Form’
which is available on the vacuum symposium web site located at
www.vacuum-uk.org. An obituary of Professor Leck can also be viewed
there). Fill in the relevant details and submit the completed form via email to
Nomination details might include for example: citations, career highlights,
achievements, wider community contributions, awards etc.
To ensure that nominations can be considered and a successful candidate
notified well in advance of the annual Vacuum Symposium UK meeting, only
nominations received by the 1st May will be considered for award during that
year. In most cases awards will be made at a suitable time during the annual
Vacuum Symposium meeting.
The medal winner will be selected by trustees of the charity set up under the
working name of Vacuum Symposium UK. At the discretion of the trustees a
‘Prize Committee’ may be set up in some years to assist with selection if this
is deemed appropriate.
VACUUM Group newsletter July 2015
Page 10
Report on the Early Career researchers’ meeting on “Plasmas, Surfaces
and Thin Films”.
This meeting took the place of the IPSI Group’s annual June meeting in
London, “Plasma, Surfaces and Thin Films”, moving this year to
Loughborough due to the unavailability of a suitable venue in London.
It was organised by Roger Smith and Sabrina Blackwell of the Ion and
Plasma Surface Interactions Group with support by the Vacuum, Thin Films
and Surfaces and Materials and Characterisation Groups of the Institute of
Physics. It was held at Loughborough University on Wednesday 17th June
2015 and was free to attend.
The programme consisted of ten oral and sixteen poster presentations. The
posters were submitted from all supporting groups and there were three
prizes, which were judged during the lunch interval and presented at the tea
break in the afternoon.
The Groups would like to thank the independent judges for their contribution
to the meeting and the difficult choices that they had to make. To be totally
impartial, they cannot be named!!!
The meeting started with an excellent overview of the status of JET by Dr
Guy Matthews from the Culham Centre for Fusion Energy, and then followed
many interesting papers presented by the ‘early-career scientists’.
The event was well supported during the day with over 50 delegates
attending, which produced some lively discussions during the lunchtime
poster session.
The three prize winners were
IPSI Prize £100: D. Shaw from York University
Poster title: Surface modification of polymer films using an atmospheric
plasma jet.
Vacuum prize £100: Sagar Agrawal from, FCIPT, Institute for Plasma
Research, Gandhinagar, Gujarat, India,
Poster title: , ZnO:Al Thin Film Deposition by Magnetron Co-Sputtering
Materials and Characterisation prize £50: Andrew McInnes from
Loughborough University
VACUUM Group newsletter July 2015
Page 11
Poster title: Fabrication and photoelectrochemical studies of Bi2Ti2O7
polychlore thin films by aerosol assisted chemical vapour deposition.
Judging by the numbers attending and the favourable comments received,
the event was a real success and may well be repeated next year.
The day’s programme:
ORAL PROGRAMME
1020: Coffee/Tea and Arrival
1040: Guy Matthews, Head of the JET Plasma Operations and Boundary Unit
“Fusion and Plasma-Surface interactions”
1120: Yevhen Zayachuk, Oxford University “Interaction of high ion flux
density deuterium plasmas with tungsten”
1140: Xiaoou Yi, Oxford University “Collision cascades and microstructural
evolution in heavy-ion irradiated tungsten: a coordinated study of electron
microscopy and multiscale modelling”
1200: T.J. Petty, Liverpool University “The dependence of tungsten fuzz
growth on He ion fluence in the range 1024-1028 m-2”
1220: Ion and Plasma Surface Interactions Group AGM. Poster session and
Lunch Break
1400: Dave Bosworth Cambridge University, “DC Magnetron Sputtering of
Ultra Thin NBN and MOSI superconductors for single photon detectors”
1420: Fabiana Lisco, Loughborough University “Surface Activation using an
atmospheric plasma process for thin film photovoltaic device fabrication”
1440: Tom Morton, Sheffield University “Structure and wear mechanism of
novel CrAlBYCN/AlSiCN PVD coating deposited using a combined UBM and
HIPIMS process in a reactive gas mix.”
1500: Tea break and announcement of poster prize winners
1530: Andy West, York University “The Role of Reactive Oxygen Species in
Fast Plasma Ashing Using an Atmospheric Pressure Plasma Jet”
1550: Lanxi Zhang, Loughborough University “Characterisation of an
Atmospheric-Pressure Air DBD Discharge"
VACUUM Group newsletter July 2015
Page 12
1610: A. Nominé, Open University ”High-speed video imaging of Plasma
Electrolytic Oxidation discharges”
1630: CLOSE
POSTER PROGRAMME
N. Somont, Huddersfield, Radiation hardness of MAX phases Ti3AlC2 and Cr2AlC
Subhashi Jayathilake, Loughborough, Towards the fabrication of novel and low cost transparent conducting oxides for electronic and optoelectronic applications
Mukul Bhatnagar, FCIPT, Institute of Plasma Research, Gujarat, India Atomistic modelling of interaction between Silver and a dielectric surface.
Andrew McInnes, Loughborough, Fabrication and Photoelectrochemical studies of Bi2Ti2O7 Pyrochlore Thin Films by Aerosol Assisted Chemical Vapour Deposition
Preeti Puntambekar, Loughborough, Cold Atmospheric-Pressure Plasma Treatment for Promotion of Cell Adhesion onto PDMS substrates
Paul Brack, Loughborough, Aerosol-Assisted CVD of Bismuth Vanadate Thin Films and their Photoelectrochemical Properties
Adam Lloyd, Loughborough, Development of a reactive force field potential for modelling the growth of Ag on ZnO.
D. Shaw, York University, Surface modification of polymer films using an atmospheric plasma jet.
Paulo Seri, Bologna Italy, The effect of plasma surface modification on biodegradation rate and biocompatibility of a poly(butylene succinate)-based copolymer
Anna W. Oniszczuk, Sheffield, Target Poisoning in Mixed Ar, N2 and CH4 Atmosphere, in Processes Using Different Target Materials for HIPIMS/DC and DC Cathode Modes.
Michael Gona, Loughborough High rate deposition of AZO thin films by pulsed DC magnetron sputtering
Hayley Brown, Surrey University, Nanostructure Gas Barrier Film for Plastic Electronics Deposited by Remote Plasma Sputtering
Christos Potamialis, Loughborough, Sputtered MoOxNy as a back contact buffer for CdTe solar cells
VACUUM Group newsletter July 2015
Page 13
Sagar Agrawal, Divya Dileep, Priyanka Marathey, Ramkrishna Rane, Subroto Mukherjee, FCIPT, Institute for Plasma Research, Gandhinagar, Gujarat, India, ZnO:Al Thin Film Deposition by Magnetron Co-Sputtering
Mark Wooton, Loughborough, Radiation Damage in Advanced Materials for Next Generation Nuclear Power Plants
Aidan Wilkinson Loughborough, Conductivity properties of highly disordered nanoscale thin films
Sibel Yilmaz, Loughborough, Optimisation of Cadmium Chloride Process for CdTe Solar Cells
2014 and 2015 Poster Prize Winners 2014 Prize-Winner: Dr Holly Hedgeland
Posters presented at the 2014 Vacuum Symposium were of the usual high
standard and the judges had a difficult decision to make. The winner was
Holly Hedgeland from the University College London. A photograph of the
presentation and summary of the work displayed in the poster are given
below.
2014 Vacuum Group prize-winner Holly Hedgeland (photo courtesy of Laura Bennett and Stuart Eyres ,Media Services, STFC Daresbury Laboratory)
VACUUM Group newsletter July 2015
Page 14
Poster Title: Quantum States and Molecular Structures on Silicon
H. Hedgeland1, A. M. Suleman1, 2, M. Siegl1, 2, K. A. Rahnejat1, 2 and S. R.
Schofield1, 2.
1. London Centre for Nanotechnology, University College London, London,
WC1H 0AH, UK. 2. Department of Physics & Astronomy, University College
London, London, WC1E 6BT, UK.
Scanning tunnelling microscopy (STM) is not only a powerful imaging
technique within the field of Surface Modification and Analysis but the sharp
metal tip of the microscope can also be used to manipulate atoms on a
surface. A notable application of this method is the creation of quantum
structures such as the quantum corral where adsorbed atoms assembled into
a circle allow bound electron states to be imaged in a pattern reminiscent of a
stone landing in a pond.
We exploit the same phenomenology when forming extended quantum bound
states on a silicon surface by coupling individual surface atomic orbitals.
Silicon atoms are most stable when forming bonds in a tetragonal structure,
in the same way that carbon does in diamond. At the surface, this can lead to
an exposed bond since there is no layer above to join to. We exploit a surface
with this structure where the upwards-pointing bonds have been passivated
through the addition of hydrogen atoms. By selective desorption of individual
hydrogen atoms from a hydrogen-terminated Si(001) surface using the STM
tip, we can create unterminated dangling bond states in precisely chosen
locations on the surface lattice.
We image pairs and small chains of dangling bonds, which exhibit the
formation of extended quantum bound states. The topography of the
structures can be interpreted by modelling the single dangling bond as if it
were an atomic state with electrons bound within a potential well, with the
individual atomic orbitals coupling to produce the quantum states in direct
analogy to molecular orbitals. We see contributions to the images from both
the ground and excited states of the resultant “molecular” quantum bound
states. The excited states imaged provide a new perspective on
semiconductor defects and are relevant to the wider challenge of quantum
state engineering.
VACUUM Group newsletter July 2015
Page 15
For interested readers, further details can be found in Nature
Communications 4, 1649 (2013)
2015 Prize-Winner: Sagar Agrawal
The 2015 Vacuum Group Poster Prize was awarded during the Early
researchers meeting in Loughborough on 17th June 2015 to Mr Sagar
Agrawal from the Institute for Plasma Research, Gandhinagar, Gujarat,
India.2015 Vacuum Group Poster prize to Mr Sagar Agrawal. A photograph of
appreciation and summary of the work displayed in the poster are given
below.
2015 Vacuum Group prize to Sagar Agrawal
Title: ZnO:Al Thin Film Deposition by Magnetron Co-Sputtering
Sagar Agrawal, Divya Dileep, Priyanka Marathey, Ramkrishna Rane, Subroto
Mukherjee, FCIPT, Institute for Plasma Research, Gandhinagar, Gujarat,India
RF sputtering of ZnO:Al2O3 ceramic targets for TCO (Transparent Conducting
Oxide) application in solar photovoltaic devices is well known and widely
used. The most often used concentrations for ZnO:Al TCO are:
ZnO : Al2O3 = 98% : 2% Weight = 98.4% : 1.6% Atomic
ZnO : Al2O3 = 98% : 2% Atomic = 97.5% : 2.5% Weight
Reactive sputtering in an Ar+O2 environment of metallic targets
Zn:Al=98:2wt% has also been used and has achieved the lowest resistivity
(6x10-4 Ω-cm). In addition reactive sputtering of pure Zn metal targets to
VACUUM Group newsletter July 2015
Page 16
achieve low resistance and highly transparent films as TCO’s has also been
tried but there is limited work on co-sputtering of ZnO and Al targets for
preparation of ZnO:Al films to form TCO’s for PV devices. In the present work
we have presented results for co-sputtering of ZnO and Al in Argon gas to
prepare ZnO:Al for TCO application.
A magnetron sputtering deposition system with two magnetrons in confocal
arrangement was used. A pure ZnO (Zinc Oxide) ceramic target (99.99%
pure) was mounted on one magnetron and RF power used for sputtering. An
Al (Aluminium) metal target (99.999% pure) was mounted on the other
magnetron and DC power used for sputtering. Both the magnetrons sputtered
simultaneously and the Al-magnetron deposition power was controlled to
control the Al concentration in the film. Al concentration was measured by
EDX (Energy Dispersive X-Ray Spectroscopy) of the film.
The base pressure of the vacuum system was 1x10-7 mbar. Films were
deposited on normal soda lime glass (SLG) which was pre-cleaned using Iso-
Propyl Alcohol (IPA) followed by vacuum plasma cleaning. The distance
between substrate and target was ~10cm. the gas used for sputtering was
Argon (Ar – 99.999 pure). All the films were deposited for 80 minutes at 1x10-
3 mbar. Films were prepared of pure ZnO and two different Al concentrations
(0.02A, 0.04A DC) at room temperature (RT) and ~150 oC. Experiments were
repeated to test the reproducibility of the results.
Film crystallinity and growth were measured using X-Ray Diffraction (XRD)
and Scanning Electron Emission (SEM). Optical properties of transparency
and band-gap were measured using an Ultra-Violet-Visible (UV-VIS)
spectrophotometer. Electrical Properties of sheet resistance, resistivity,
charge carrier density, carrier mobility were obtained using a four-point probe
and Hall measurement.
SEM and XRD results show a decrease in crystallinity and increase in stress
with increase in Al% and films become amorphous for even higher Al-
concentrations. This crystallinity improves if the film is grown at higher
temperature (~150 oC) and, above 5% Al concentration, films become
amorphous. This may be improved by using higher temperature but this still
needs to be tested in further studies. Four-point probe and Hall measurement
results for electrical properties of the films show that the lowest resistivity is
achieved for ~1.6-1.8 atomic Al% samples (equivalent to 0.02A deposition
current as shown in the figure). Although charge carrier density increases
with Al concentration, mobility of electrons decreases due to an increase in
VACUUM Group newsletter July 2015
Page 17
defects in the film. UV-VIS spectrophotometer measurements of the films for
band-gap and transparency measurement show a smaller increase in band-
gap for higher Al concentration. Transparency is above 70% for lower Al
concentration.
These films will now be tested as TCO’s for their performance on a PV device
and results compared with the presently-used TCO’s.
Resistivity variation with Aluminium content for ZnO:Al films
Mitigation of particles from Sputter Ion Pumps
A D Chew* and T Wynohrad#
*Edwards Ltd, Innovation Drive, Burgess Hill, West Sussex, RH10 9TW, U.K.
#Gamma Vacuum, 2915 133rd Street West, Shakopee, MN 55379, USA
Sputter Ion Pumps (SIP) are used in a wide range of HV and UHV/XHV
applications. In this article we describe a phenomenon of particulate
emissions from SIPs; their source and a technique developed for their
mitigation (an ‘Eximo shield’).
Contemporary SIP versions generally comprise elements of repeated
‘Penning cells’. These are relatively small and rely on a strong magnetic field
(~0.12T) and large potentials (anodes at up to 7 kV and grounded cathodes)
to establish a self-sustaining plasma. See Figure 1. The pumping action of a
SIP relies upon the ionizing collisions of electrons with neutral molecules.
VACUUM Group newsletter July 2015
Page 18
Resultant positive ions are attracted to the cathode (usually made of Ti). This
results in sputtering of the cathode material and freshly covered Ti surfaces
pump by ‘gettering’. There is also ‘direct’ ionic pumping of positive ions which
become buried and trapped in the bulk of the cathode and also the burial of
atoms at the anode under deposited Ti1.
Figure 1 Cross-section of a SIP
SIPs have no moving parts or lubricants and do not require a supporting
‘primary’ pump. They provide clean, zero maintenance and stable operating
pressures. There can though under certain circumstances, be an emanation
of particles which can have an impact upon electrical and optical
components. Figure 2 shows an example of this: the neutral-coating of
isolating ceramics.
Figure 2 New versus after-life insulators
Other possible examples include neutrals interfering with electrons in a
synchrotron. A challenge lies in developing a technique which minimizes this
discharge without compromising on reduced conductance (and pumping
speed) of the SIP from the use of standard shielding and baffling techniques.
In a relatively simple apparatus a ‘collector’ plate was positioned ~15 cm in a
column with direct line-of-sight above a 20 l/s SIP inlet flange. The potentials
VACUUM Group newsletter July 2015
Page 19
along the column were variable to be able to simulate different scenarios (e.g.
a SEM column); the collector current being a direct measure of emissions.
These measurements combined with XPS analysis indicated that the SIP
emissions were primarily neutrals with a relatively smaller amount of positive
ions. Irrespective of the nature of the neutrals they can generate secondary
electrons with the potential for interference.
An ‘Eximo’ shield is shown in situ below which also shows how it blocks
emission pathways.
Figure 3 ‘Eximo’ shield (in orange) integrated in a SIP: US Patent No. 7.850.432 B2
The reduction of emissions using the Eximo shield is shown below; with
typical emissions reduction by x1/1000.
Figure 4 Effect of an Eximo shield on emissions (1 Torr = approx 1.33 mbar)
VACUUM Group newsletter July 2015
Page 20
Importantly the Eximo shield design results in a negligible loss of the SIP
conductance/speed and achievable ultimate pressure. This is to be
contrasted with a potential for >50% speed loss for a standard dual elbow
configuration.
(Gamma Vacuum web-site has a more detailed explanation:
http://gammavacuum.com/)
Andrew Chew 8th May 2015 [email protected]
BVC web site The new site contains the BVC mission statement, remit, activities, events, members, the current committee, and a whole lot more ! There is a leaflet to download, explaining the purpose of the BVC, that can be folded into a third the size of A4 and can be used at conferences and meetings for delegates to read. Additionally, there is a PowerPointTM presentation of ‘What the BVC is and what it does’. This can be further used as an educational tool to give a brief introduction to the history and ‘workings’ of the BVC. The BVC offers two prizes annually; The British Vacuum Council Senior Prize (with associated John Yarwood Memorial Medal) and the British Vacuum Council Junior prize (which comprises the BVC Medal and C.R. Burch Award). Within the web-site there are lists of former recipients and details of how to nominate a candidate for a current prize. Nomination is always open which means that, if the deadline is missed one year, the nomination can be submitted the following year for consideration by the Committee. See it all here : http://www.british-vacuum-council.org.uk/ The BVC is a link to IUVSTA (The International Union for Vacuum Science, Technique and Applications), and the web-site is an ideal way to trace this link. The site can directly link you electronically to the IUVSTA web site. The IUVSTA Divisional Representatives can be found, who are your link to IUVSTA activities within your field, via the web-site http://iuvsta-us.org/ Alan Webb The Open University
VACUUM Group newsletter July 2015
Page 21
Forthcoming events
The Vacuum Group will co-sponsor the IPSI annual meeting on Plasmas,
Surfaces and Thin Films in June 2016 and plans to join Vacuum Expo again
in October 2016 to run our 7th Vacuum Symposium. Check the Vacuum
Group web-site at www.iop.org for further details of meetings.
The 14th European Vacuum Conference will take place in Portoroz, Slovenia
from 6 – 10 June 2016 .
Committee 2014-2015
Chair: Professor John Colligon ; Honorary Secretary: Dr Saim Memon Hon Treasurer: Dr Sunil Patel Members: Dr Hazel Assender, Hayley Brown, Dr Andrew Chew, Dr Matthew Cox, Mr Joe Herbert, Dr Oleg Malyshev, Dr Gordon Jones, Dr Steve Taylor, Dr Alan Webb.
Join the Vacuum Group
The Group welcomes new members. For details of how to join please
contact Anne Crean at IOP ([email protected])
This newsletter is also available on the web and in larger print sizes The contents of this newsletter do not necessarily represent the views or policies of the Institute of Physics, except where explicitly stated. The Institute of Physics, 76 Portland Place, W1B 1NT, UK. Tel: 020 7470 4800 Fax: 020 7470 4848
Top Related