Course Scheme
Subject Code
Subject Name
Teaching Scheme Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
SEECC302 Electronic
Devices &
Circuits-I
04 -- -- 04 -- -- 04
Subject Code
Subject Name
Examination Scheme
Theory Marks Term Work
Practical
Oral
Total
Internal assessment
Test1 Test2
Avg.
of 2
Tests
End Sem. Exam
SEECC302 Electronic
Devices &
Circuits-I
20 20 20 80 - 100
A. Course Objectives and Course outcomes
Sr.No Module Chapter
Course Objectives (COB) Course Outcomes (CO)
Students shall be able to : After completion of the course the learner should be able to:
1
Module 1 Diode and material science
Study of various types of resistor, capacitor and inductors
COB1: Explain fabrication
steps of various passive
components and Explain the
small signal model of PN
junction Diode
CO1: 1. Fabricate the explain
fabrication steps for passive devices.
2. Draw and explain the characteristics of Diode.
Basic fabrication steps of passive elements
PN junction Diode characteristics, small signal model
2
Module 2 Rectifier, Filters and Regulator
Analysis and design of rectifier circuit with Filters (L, LC, C,CLC,CRC)
COB2: Design different rectifier ,filter regulators circuits.
CO2: 1. Analyze rectifiers, filters
and regulators for its parameters
2. Design power supply for given application.
Concept of load and line regulation in power supply circuits.
Analysis and design of zener voltage regulator.
3.
Module 3 Transistor biasing and design
Operation of BJT, FET (N-CHANNEL, P-CHANNEL) with characteristics and equation.
COB3: Calculate the Q point for different biasing circuit and identify the different biasing circuits of BJT and FET
CO3: 1. Analyze the different
biasing circuits of BJT and FET to find its Q-point and Stability.
2. Design the different biasing circuits.
Bipolar Junction Transistor: BJT characteristics, DC/AC load line, DC analysis and design of fixed bias,
collector to base bias and voltage divider bias, stability factor analysis
Junction Field Effect Transistor: Analysis and design of self- bias and voltage divider bias, zero temp drift biasing.
4
Module 4 Transistor modeling and Small signal analysis of amplifier
Hybrid and hybrid Pi
model of BJT with graphical representation.
COB4: Find Av, Ri, Ro of
BJT and FET amplifier
circuit.
CO4: 1. Draw small signal
model for given BJT OR FET circuits and Calculate the values of RI, RO, AV, Af for given circuits
Small signal model of
FET with graphical
representation.
Small signal analysis (Zi, Zo, Av and Ai) of CE, CB, and CC configurations using hybrid-pi model of BJT
small signal (mid-
frequency) analysis of CS, CD and CG
amplifiers using FET
5
Module 5 High frequency response of BJT and FET amplifiers
High frequency hybrid-
pi equivalent Circuits of BJT and FET, Miller
effect and Miller capacitance, gain bandwidth product
COB5: Explain the effect of capacitors at low and high frequency, analyze the circuit for low and high frequency and will be calculate value of capacitor for given Bandwidth
CO5: 1. Explain high
frequency model for BJT and FET.
2. Calculate values of capacitors for given bandwidth
Effects of capacitors on
frequency response of single stage amplifier using BJT and FET
Analysis of single stage
amplifiers at HF and gain bandwidth product.
6 Module 6 Design of small signal amplifiers
Design of single stage
RC Coupled CE
amplifier. COB6: Design BJT and FET amplifiers for the given specifications
CO6:
1. Design CE and CS amplifier for given specification.
.
Design of single stage RC Coupled CS amplifier. (USE of parameters from data sheet compulsory)
Keywords Color Code:
FE SE TE BE
B. Syllabus Detailing and Learning objectives
Module Chapter Detailed Content Syllabus Detailing Learning Objectives
Module
1 Chapter 1 Study of
various types of
resistor, capacitor and
inductors, Basic
fabrication steps of
passive elements (2hr)
Introduction of passive
components and its
fabrication steps.
Purpose: This chapter introduces construction and
working of passive elements such as R,L,C.This also
introduces fabrication steps of these elements.
1.Explain fabrication steps
for R, L, C components(R)
2. Explain construction of
all basic components.(R)
3.Explain fabrication steps
for RL,RC circuits(U)
4. Explain working of diode
in forward bias as well as
reverse bias mode.
5.Draw load line for given
circuit.
6. Calculate ac resistance
value of diode from given
diagram.
7. Draw small signal model
of diode.
Scope – 1. Academic Aspects- Understanding elements and
materials present in passive components and relation
between these materials and values of components. 2. Technology Aspect- Use of fabrication steps to
identify values as well as understand concept of
material science. 3. Application Aspect- application and interpretation
of component values and role of material in big
circuits.
Students Evaluation – 1. Theory Questions to be asked construction and
working of these components
Chapter 2 PN junction diode
Construction and working of
PN junction as diode. Its
biasing in forward and
reverse mode. Small signal
analysis of diode ,its load
line concept.
Purpose – This chapter gives detailed insight of PN
junction construction and working. Use of PN diode in
both ac and dc mode and also introduces concept of
biasing.
Scope – 1. Academic Aspects- Learning the insights of basic
diode structure and its biasing. Load line concept
important for future study. 2. Technology Aspect- Biasing concept of diode leads
to understanding of switching concepts as well as it
form the basis of rectifier circuits which are building
blocks of power supply design. 3. Application Aspect- Application of biasing
concepts leads to design of various rectifier circuoits as
well as wave shaping circuits.
Students Evaluation 1. Description of biasing condition.
2. Problem solving for calculation of ac parameters of
diode.
Module
2 Chapter 1. Analysis and design of
rectifier circuit with
Filters (L, C) (3 hr)
Analysis of half wave full
wave circuits and need of
filter Analysis of rectifier with
filter. Design of rectifier and filter
(L,C) circuits.
Purpose- This chapter is focused on analysis of
rectifier circuit and filter circuit especially L,C. 1. Draw rectifier circuits.
2. Explain working of
rectifiers.
3. Derive expression for
ripple factors with and
without filters.
4.. Calculate components for
given specifications
5. Design rectifier circuits
for given application.
Scope – 1. Academic Aspects- Understanding working of rectifiers and filters. 2. Technology Aspect- Understanding use of
specifications of rectifier and filter for power supply
design 3. Application Aspect- Students will be able to select
appropriate filter and rectifier for given application
Students Evaluation – 1. Problem solving for calculate ripple values for
given rectifier filter combination
2. Design rectifier and filter circuits for given
application 3. Simulate rectifier and filter circuits for given
specifications
Chapter 2. Analysis and design of
rectifier circuit with
Filters (LC, CLC,CRC) (2hrs)
Analysis of rectifier with
filter. Design of rectifier and filter
(LC, CLC, CRC) circuits.
Purpose- This chapter is focused on analysis of rectifier circuit
and filter circuit especially LC, CLC,CRC.
Scope – 1. Academic Aspects- Understanding working of rectifiers and filters. 2. Technology Aspect- Understanding use of
specifications of rectifier and filter for power supply
design 3. Application Aspect- Students will be able to select
appropriate filter and rectifier for given application
Students Evaluation – 1. Problem solving for calculate ripple values for
given rectifier filter combination
2. Design rectifier and filter circuits for given
application 3. Simulate rectifier and filter circuits for given
specifications
Module
2 Chapter 3 - Concept of load and
line regulation in power
supply circuits
Analysis zener voltage
regulator(1 hr)
Concept of specifications
of power supply and use
of zener as regulator.
Purpose – This chapter introduces concept regulator and its
specification
6.Design filter circuits for
given application
7.Design rectifier and filter
combination for given
specifications
8. Choose best rectifier filter
circuits for given
application.
Scope – 1. Academic Aspects- Student will study regulator concept and explain
different regulator specifications. 2. Technology Aspect- Regulator specifications are important in power supply
design 3. Application Aspect- Design regulator for given applications based on
knowledge of this chapter.
Student Evaluation - 1. Define line and load regulation. 2Explain working of zener regulator. 3. Simulate zener circuit to find regulation parameters.
9. Design power supply for
given application.
Chapter 4 Design of zener
regulator( 1hr)
Design of zener regulator. Purpose – This prepares students design zener regulator for
given specifications
Scope – 1. Academic Aspects- Students will be able to learn design aspects of zener
regulator. 2 Application Aspect- Design zener regulators for given applications. Student Evaluation -
1. Design regulator for given specification.
2. Verify design using SPICE program.
Module 3
Chapter 1 Operation of BJT,
with characteristics
and equation. BJT
characteristics,
DC/AC load line(2 hr)
BJT characteristics and I-
V characteristics
Purpose – This chapter introduces explains concept of BJT
construction and working with operating
characteristics.
1.Explain input output
characteristics of CE/CB
amplifier
2. Derive expressions for
stability factors.
3.Draw dc load line for
given circuit BJT/FET
4. Calculate dc bias
conditions for given BJT
circuits.
5. Calculate dc bias
conditions for given FET
circuits.
6.Design BJT bias circuits
Scope – 1. Academic Aspects- Students will be able to
interpret the VI characteristics of BJTand concept of Q
point. 2. Technology Aspect-Understand construction steps
of BJT and its relation with I-V characteristics
3. Application Aspect- Design of Dc bias of BJT for
proper amplification of signal Student Evaluation - 1. Students will be able to explain concept of biasing
for BJT.
2. Students will be able to calculate dc bias values.
for given specifications
7..Design FET bias circuits
for given specifications
8.Calculate values of Bias
resistors for given BJT and
FET combinations
9.Chose the best bias circuit
for given application
Chapter 2 DC analysis and design
of fixed bias, collector
to base bias and
voltage divider bias,
stability factor analysis
(3hr)
DC analysis and design of
biasing circuits
Purpose – Students can compare stability
performances of various BJT biasing circuits
Scope – 1. Academic Aspects- Calculate dc bias values and
find stability of circuits 2. Technology Aspect- Students can design dc bias circuits for stability. 3. Application Aspect- Design bias circuit and select
best one to attain stability
Student Evaluation – 1. Theory questions based on calculation of dc bias 2. Design of dc bias for stable circuit.
Chapter3 FET (N-CHANNEL, P-
CHANNEL) with
characteristics and
equation(1 hr)
FET characteristics and I-
V characteristics
Purpose – This chapter introduces explains concept of FET
construction and working with operating
characteristics. Scope – 1. Academic Aspects- Students will be able to
interpret the VI characteristics of FET and concept of
Q point. 2. Technology Aspect-Understand construction steps
of BJT and its relation with I-V characteristics
3. Application Aspect- Design of Dc bias of FET for
proper amplification of signal Student Evaluation - 1. Students will be able to explain concept of
biasing for FET.
2. Students will be able to calculate dc bias values.
Chapter 4 Junction Field Effect
Transistor: Analysis
and design of self- bias
and voltage divider
bias, zero temp drift
biasing.(2 hr)
JFET biasing Purpose – Students can compare stability
performances of various FET biasing circuits
Scope – 1. Academic Aspects- Calculate dc bias values and
find stability of circuits 2. Technology Aspect- Students can design dc bias circuits for stability. 3. Application Aspect- Design bias circuit and select
best one to attain stability
Student Evaluation – 1. Theory questions based on calculation of dc bias 2. Design of dc bias for stable circuit.
Module
4 Chapter 1 Hybrid pi model and h
parameter model of
BJT
(2hr)
. Purpose – Students can draw small signal model of
BJT and calculate ac parameters. 1.Explain concept of h
parameters and pi models
for transistor
2. Draw small signal model
for given BJT OR FET
circuits.
3.Calculate values of
RI,RO,AV,AI for given
circuits(BJT,FET)
Draw small signal model for
given combination of BJT
and FET.
Analyze given circuit and
Scope – 1. Academic Aspects- Draw small signal model using
pi model of BJT 2. Technology Aspect- Students can relate models with various applications 3. Application Aspect- Use small signal models to
analyze amplifier. Student Evaluation – 1. Theory questions based on calculation of ac
parameters 2. Design of ac circuit for given gains and impedances
for applications such as audio amplifier.
derive expression for given
circuits.
Chapter 2 Small signal analysis
(Zi, Zo, Av and Ai) of
CE, CB, and CC
configurations using
hybrid-pi model of BJT
(3 hrs)
Purpose – Students can draw small signal model of
BJT and calculate ac parameters.
Scope – 1. Academic Aspects- Calculate ac parameters using
small signal model for BJT 2. Technology Aspect- Students can simulate ac circuits to find ac
performance 3. Application Aspect- Design ac circuit of BJT for
given specifications
Student Evaluation – 1. Theory questions based on calculation of ac
parameters 2. Design of ac circuit for given gains and impedances
for applications such as audio amplifier.
Chapter 3 Small signal model of
FET with graphical
representation. (1 hrs)
Purpose – Students can draw small signal model of
FET and calculate ac parameters.
Scope – 1. Academic Aspects- Draw small signal model using
pi model of FET 2. Technology Aspect- Students can relate models with various applications 3. Application Aspect- Use small signal models to
analyze amplifier.
Student Evaluation – 1. Theory questions based on calculation of ac
parameters 2. Design of ac circuit for given gains and impedances
for applications such as audio amplifier.
Chapter 4 small signal (mid-
frequency) analysis of
CS, CD and CG
amplifiers using FET (3
hrs)
Purpose – Students can draw small signal model of
FET and calculate ac parameters.
Scope – 1. Academic Aspects- Calculate ac parameters using
small signal model for BJT 2. Technology Aspect- Students can simulate ac circuits to find ac
performance 3. Application Aspect- Design ac circuit of FET for
given specifications
Student Evaluation – 1. Theory questions based on calculation of ac
parameters 2. Design of ac circuit for given gains and impedances
for applications such as audio amplifier.
Module
5 Chapter 1 High
frequency hybrid-pi
equivalent Circuits of
BJT and FET, Miller
effect and Miller
capacitance, gain
Purpose: To make students understand hybrid pi model of BJT and MOSFET. To study bypass capacitors and Miller capacitance and gain bandwidth product
1. Explain high frequency
model for BJT and FET.
2.Calculate values of
capacitors for given
bandwidth
Scope – 1. Academic Aspects- Understanding different parameters of hybrid pi model. 2. Technology Aspect- Understand the difference between hybrid pi model of BJT and FET.
bandwidth
product(1hr)
3. Application Aspect- Basics to understand analysis of microwave devices.
Students Evaluation – 1. Theory Questions to be asked Frequency response, and effect of capacitors at low and high frequency. 2. Numerical on frequency determination for BJT and FET 3. Corresponding viva questions can be asked Miller capacitance and gain bandwidth product
Purpose: To make students understand hybrid pi model of BJT and FET. To study bypass capacitors and Miller capacitance and gain bandwidth product
Chapter 2
Effects of capacitors
on frequency response
of single stage
amplifier using BJT
and FET Analysis of
single stage amplifiers
at HF and gain
bandwidth product.
(2hr)
Purpose – This chapter gives detailed insight of frequency response of BJT and FET amplifiers at low and high frequency due to the effects of coupling, bypass and miller capacitor.
Scope – 1. Academic Aspects- Understanding Frequency response, and effect of capacitors at low and high frequency. 2. Technology Aspect- Understand designing of amplifiers to work for certain frequency range. 3. Application Aspect- Designing of amplifiers at certain bandwidth.
Students Evaluation 1. Theory Questions to be asked on Frequency response, and effect of capacitors at low and high frequency.
2. Numerical on frequency determination for BJT and MOSFET 2. Lab experiment on frequency response 3. Corresponding viva questions can be asked Frequency response, and effect of capacitors at low and high frequency,
Module
6 Chapter 6 Design of single stage
RC Coupled CE and
CS amplifier. (6hr)
Purpose –
Implementation of basics learned from module 3-5
1.Calculate values of
components for given
specifications
2.Design a circuit for given
application Scope –
1. Academic Aspects- Designing of CE and CS amplifier for the given
specification. 2. Technology Aspect-
Verifying the designing by implementation of the
designed circuit in the Lab sessions. 3. Application Aspect-
Is used as the basic building block of power
amplifiers.
Student Evaluation – 1. Questions based on designing of CE and CS
amplifier.
2. Designing of CE amplifier in Lab
E. CO and PO Mapping F. Module and Learning Levels Mapping
LL-> LL 1 LL 2 LL 3 LL 4 LL 5 LL 6
Modules Remember Understand Apply Analyze Evaluate Create
Module-I √ √
Module-II √ √ √ √ √ √
Module-III √ √ √ √ √
Module-IV √ √ √ √
Module-V √
Module-VI √ √
CO/PO PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10
CO1 √
√
CO2 √ √ √ √
√
CO3 √ √ √ √
√
CO4 √ √ √ √
√
CO5 √ √ √ √ √
CO6 √ √ √ √ √ √ √
Top Related