TerminationTermination Kits & Joints
Termination Kits
Insulating Boots
Cable Box Glands
Earthing Kits
Cable Joints
End Caps
Cable Breakouts
Bus Bar Tubing
Bus Bar Tapes
Insulating & SealingTubing
Splicing KitInline
Branch
Tee
Raychem3M
Elastimold
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ESTU TERMINATIONSLow voltage heat shrinkable terminations are available for the fullrange of cable types and sizes.They are acknowledged to besimpler, more reliable, and much cheaper to install thantraditional systems.Catalog Conductor SizeNumberUpto 1KV/PlasticIndoor / Outdoor mm2
Four ConductorsNot Armoured Wire ArmouredESTU-OX/4C 4-16 ESTU-OX/4C 4-16/WA 4 - 16ESTU-OX/4C 25-50 ESTU-OX/4C 25-50/WA 25 - 50ESTU-OX/4C 70-150 ESTU-OX/4C 70-150/WA 70 - 150ESTU-OX/4C 185-300 ESTU-OX/4C 185-300/WA 185 - 300ESTU-OX/4C 500-XXX ESTU-OX/4C 500-XXX/WA 500
EPKT TERMINATIONSMedium voltage heat shrinkable terminations offer outstandinglong term reliability with over 20 years of proven performance inpolluted environments.The installation accommodates simplifiedcable preparation techniques.The factory engineered kit alongwith clear instruction sheet permits rapid on-site installation.Termination SelectorChoosing one figure from theleft-hand column of each table
ESIB INSULATING BOOTSHeat shrinkable insulating boots allow terminations to be used inconventional compound and oil filled boxes with air clearances.The design insures good insulation and impulse performanceinspite of reduced clearances.The boots can be used with bothpaper and plastic cables upto 36KV.
Voltage (Vmax)Cable sizeNumber of coresDielectricLocationLength (3 core cables)
Typicalpart number: EPKT – 17 D 3 X I H2
Voltage in KV
7 for 7.2 KV
17 for 12 KV and 17.5 KV
24 for 24 KV
36 for 36 KV
Number of Cores
1 For Single (1) core
3 For three (3) core
Size in mm2 7.2 KV 12 KV & 17.5 KV 24 KV 36 KV
A 16 - 50 16 - 25 - -
B 70 - 120 35 - 70 25 - 50 -
C 150 - 240 95 - 240 70 - 185 50 - 95
D 300 - 500 300 - 400 240 - 300 120 - 185
E 630 - 1000 500 - 800 400 - 630 240 - 500
F - 1000 800 - 1000 630 - 1000
Catalog Conductor SizeNumberStraight mm2
bootsESIB-4ST/10-35 10 - 35ESIB-4ST/50-95 50 - 95ESIB-4ST/120-300 120 - 300ESIB-4ST/400-630 400 - 630
ESGL CABLE BOX GLANDSCable box glands come complete with all essential hardware formounting the terminations.Typically used on cable boxesdesigned for compound filling where the distance from bushingto base is a limiting factor.
Catalog Conductor SizeNumber
mm2
ESGL-4S/3C 25-95 25 - 95ESGL-4S/3C 120-300 120 - 300ESGL4A/1C 120-630 (FOR 1/C AL ARMOURED CABLES) 120 - 630
Catalog Conductor SizeNumberRight Angle mm2
BootsLong ShortESIB-4RL/10-35 ESIB-4RS/10-35 10 - 35ESIB-4RL/50-95 ESIB-4RS/50-95 50 - 95ESIB-4RL/120-300 ESIB-4RS/120-300 120 - 300ESIB-4RL/400-630 400 - 630ESIB-6RL/70-500 (Upto 36KV) 70 - 500
Location of Termination
I For INDOOR
O For OUTDOOR
Length (only three core) of the terminated portion (tail)
H1 For 450 mm long
H2 For 650 mm long (min for 17.5 KV outdoor and 36 KV indoor)
H3 For 800 mm long (min for 24 KV outdoor and 36 KV outdoor)
H4 For 1200 mm long
All kits are supplied as a set of 3.
Cable glands are available in aluminium for single core cable applications.
Dielectric or insulation type
X For PLASTIC eg. XLPE, EPDM. EPR, etc.
M For MIND non-draining paper (notapplicable for draining paper cables)
RAYCHEM
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
ESPM EARTHING KITSEarthing kits are available for solderless earthing of metal tapeshield for plastic cables. Earthing kits are also available for steelwire, steel tape, aluminium wire, and corrugated aluminiumarmour.Catalog Core Dia. Conductor SizeNumberOne Core, CopperTape Screen mm mm2 mm2 mm2
Solderless Design
7.2 KV 17.5 KV 36 KV
ESPM-E-50 12 - 18 16 - 50 16 - 25
ESPM-E-51 19 - 24 70 - 150 35 - 95 25 - 35
ESPM-E-52 25 - 30 185 - 300 120 - 185 50 - 70
ESPM-E-53 31 - 40 400 - 630 240 - 500 95 - 300
ESPM-E-54 41 - 65 800 - 1000 630 - 1000 400 - 1000
Catalog Core Dia. Conductor SizeNumberOne Core, CopperTape Screen mm mm2 mm2 mm2
Solderless Design
7.2 KV 17.5 KV 36 KV
ESPM-E-55 12 - 18 16 - 50 16 - 25
ESPM-E-56 19 - 24 70 - 150 35 - 95 25 - 35
ESPM-E-57 25 - 30 185 - 300 120 - 185 50 - 70
ESPM-E-58 31 - 40 240 - 500 95 - 300
TMS WIRE MARKING SLEEVEThermofit Marking Sleeves are heat shrinkable permanent wiremarkers.TMS is used in a variety of markets to providepermanent and legible identification for all kinds of wire andcable applications.Catalog Application Range Pcs/rollNumber Min - Max Dia.
TMS-3/32-WHITE 1.2 - 2.3 5000
TMS-1/8-WHITE 1.6 - 3.0 5000
TMS-3/16-WHITE 2.5 - 4.5 2500
TMS-1/4-WHITE 3.5 - 6.0 2500
TMS-3/8-WHITE 5.0 - 9.0 1500
TMS-1/2-WHITE 7.0 - 12.0 1500
TMS-3/4-WHITE 10.0 - 18.0 500
102L CABLE END CAPSCable caps are coated with a sealing adhesive coating.Theyprovide an environmental seal and upto 1 KV insulation at thecable end.Catalog Application RangeNumber Min - Max Cable Dia.
mm
102L011-37/42 4 - 8
102L022-37/42 8 - 17
102L033-37/42 17 - 30
102L044-37/42 30 - 45
102L048-37/42 45 - 65
102L055-37/42 65 - 95
102L066-37/42 95 - 115
302K / 502K CABLE BREAKOUTSCable breakouts provide reliable environmental sealing andinsulation to conductors in multi-conductors sheathed orarmoured cables and conduit ends.Catalog NO. OF CODES Conductor SizeNumber mm2
302K333-53/42 2 4 - 25
302K224-53/42 2 35 - 150
302K466-53/42 2 185 - 300
502K033-53/42 4 4 - 35
502K046-53/42 4 35 - 70
502K016-53/42 4 70 - 150
502K026-53/42 4 185 - 300
ESIJ JOINTSFor joining cables upto 36KV we offers a system based on heatshrinkable materials which is; fast and simple to install, eliminatesshelf life limitations, and offers high impact resistance and highearth fault current capacity. Millions of cable joints upto 36KVinstalled in some of the most severe service conditions haveconfirmed the reliability of the design under high electrical,thermal, and environmental stress.
Catalog Conductor SizeNumberUpto 1KV/Plastic mm2
Four Conductors
Not Armoured Wire Armoured
ESIJ-OX/4C 1.5-6/NA ESIJ-OX/4C 1.5-6/SA 1.5 - 6
ESIJ-OX/4C 6-16/NA ESIJ-OX/4C 6-16/SA 6 - 16
ESIJ-OX/4C 25-50/NA ESIJ-OX/4C 25-50/SA 25 - 50
ESIJ-OX/4C 70-150/NA ESIJ-OX/4C 70-150/SA 70 - 150
ESIJ-OX/4C 185-300/NA ESIJ-OX/4C 185-300/SA 185 - 300
Catalog Conductor SizeNumberUpto 17.5/Plastic mm2
One Conductor
Without Armour
ESIJ-4X/1C 25-35/NA 25 - 35
ESIJ-4X/1C 50-95/NA 50 - 95
ESIJ-4X/1C 120-185/NA 120 - 185
ESIJ-4X/1C 240-300/NA 240 - 300
ESIJ-4X/1C 400-630/NA 400 - 630
Catalog Conductor SizeNumberUpto 17.5/Plastic mm2
Three Conductors
Without Armour With Armour
ESIJ-4X/3C 25-35/NA ESIJ-4X/3C 25-35/SA 25 - 35
ESIJ-4X/3C 50-95/NA ESIJ-4X/3C 50-95/SA 50 - 95
ESIJ-4X/3C 120-185/NA ESIJ-4X/3C 120-185/SA 120 - 185
ESIJ-4X/3C 240-300/NA ESIJ-4X/3C 240-300/SA 240 - 300
RAYCHEM
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
BBIT / BPTM BUS BAR TUBINGBBIT and BPTM are heat shrinkable tubings for use on straightor bent bus bars where maximum clearance reduction isrequired. Ideal for original equipment assembly or in retrofitapplications where access to one end is available. Providesinsulation upto 36 KV and long term reliability even at highcontinuous operating temperature.
Catalog Rectangular Round Bar SpoolNumber Bar Profile Diameter Length
(1 + t) mm (d) mm
BBIT-25/10-A/U 17 - 28 11 - 20 30 m
BBIT-40/16-A/U 28 - 45 18 - 32 30 m
BBIT-65/25-A/U 44 - 67 28 - 47 15 m
BBIT-100/40-A/U 69 - 102 44 - 72 15 m
BB IT-150/60-A/U 102 - 148 65 - 105 15 m
BBIT-175/80-A/U 96 - 133 85 - 125 10 m
HVBT BUS BAR TAPEHVBT is a heat shrinkable high voltage bus bar tape, designed togive the integrity of heat shrinkable tubing with the versatility ofa wraparound sleeve.The HVBT tape offers insulation for upto36 KV.Catalog Tape LengthNumber Width per roll
mm
HVBT-12-A 25 10 m
HVBT-14-A 50 10 m
HVBT-16-A 100 10 m
LVBT LOW VOLTAGE BUS BAR TAPELVBT is a general purpose heat-shrinkable insulating tape suitablefor applications upto 1000V.
Catalog Tape LengthNumber Width per roll
mm
LVBT-1-R 25 8 m
LVBT-2-R 50 8 m
LVBT-4-R 100 8 m
MWTM INSULATING & SEALING TUBINGRaychem heat shrinkable tubings can be used for general purposecable splicing and electrical insulation up to 1 KV.
MWTM is a medium wall tubing which can be used in lowvoltage terminations, joints, and cable repairs with or withoutadhesive coating.
MWTM could be also ordered without the inner adhesivecoating. Ordering example: MWTM-75/22-A/U.
Catalog Application Range Cut-pieceNumber Min - Max Dia. Length
mm mm
MWTM-10/3-1000/172 3.5 - 9.0 1000
MWTM-16/5-1000/172 5.5 - 14.5 1000
MWTM-25/8-1000/172 9.0 - 22.5 1000
MWTM-35/12-1000/172 13.0 - 31.5 1000
MWTM-50/16-1000/172 17.5 - 45.0 1000
MWTM-63/19-1000/172 21.0 - 57.0 1000
MWTM-75/22-1000/172 24.0 - 68.0 1000
MWTM-85/25-1000/172 27.5 - 77.0 1000
MWTM-95/29-1000/172 32.0 - 86.0 1000
MWTM-115/34-1000/172 37.0 - 104.0 1000
MWTM-140/42-1000/172 46.0 - 126.0 1000
MWTM-160/50-1000/172 55.0 - 144.0 1000
MWTM-180/60-1000/172 66.0 - 162.0 1000
MWTM-90/36-1000/42 38 - 80 1000
MWTM-120/54-1000/42 55 - 106 1000
MWTM-164/80-1000/42 88 - 148 1000
MWTM-195/102-1000/42 112 - 177 1000
THE SCOTCHCAST INLINE SPLICING KIT
82-A1 to 82-A3, 92-A1 to 92-A6
92-A7
RAYCHEM
3M
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
The inline splicing kit can be used on plastic insulated or massimpregnated paper cables. Designed to ensure complete mechan-ical protection, plus a high standard of strength, adhesion anddielectric values.The Scotchcast splicing kit is ideally suited toburied splice applications.The quality of resin offers the highestresistance against ingress of moisture and attack by alkalies andacids.The quick curing time of the resin allows the splice to beput into service immediately.
Each kit contains a preshaped Two Part Transparent Mould Body,Scotch Tape 23 to seal the mould ends, Nozzle Adapter kit,Unipak Scotchcast Resin plus installation drawings. Each kit canbe used with various cables, types and sizes and are rated up to6KV.
The Branch and Tee splicing kit have the same basic compo-nents as the Scotchcast inline splicing kits except the shape ofthe mould body.The kits can be used with various cable typesand sizes and are rated up to 1 KV.
CABLE DIAMETER CABLE TYPE AND CROSS SECTION MM2 DIMENSIONSKIT NUMBER MIN MAX ARMOURED NON ARMOURED D C
MM MM UP TO 1KV UP TO 6KV UP TO 1KV UP TO 6KV MM MM82-A1 7 16 4x1.5 – 4x4 25 18282-A2 12 25 4x10 – 4x16 33 27082-A3 25 40 4x25 – 4x35 45 39592-A1 8 22 4x10 – 4x25 – 36 19092-A2 14 30 4x35 – 4x50 – 49 27692-A3 25 35 4x50 3x50 4x70 – 54 36092-A4 28 47 4x95 3x95 4x150 – 69 40092-A5 33 55 4x150 3x150 4x185 – 100 52092-A6 45 70 4x300 3x300 4x300 – 128 70092-A7 50 77 4x300 3x300 4x300 – 140 870
CABLE DIAMETER CABLE TYPE AND CROSS SECTION MM2 DIMENSIONSKIT NUMBER MIN MAX ARMOURED NON ARMOURED D C
MM MM UP TO 1KV UP TO 1KV MM MM92-B1 MAIN 10 28 4x2.5 4x10 60 190
BRANCH 10 24 4x2.5 4x492-B3 MAIN 20 35 4x25 4x25 81 360
BRANCH 15 30 4x16 4x1691-B16 MAIN 30 58 4x70 4x185 130 430
BRANCH 17 42 4x35 4x9591-B171 MAIN 50 * NOTE 1 4x185 4x240 154 560
BRANCH 40 55 4x185 4x185
CABLE DIAMETER CABLE TYPE AND CROSS SECTION MM2 DIMENSIONSKIT NUMBER MIN MAX ARMOURED NON ARMOURED D C
MM MM UP TO 1KV UP TO 1KV MM MM92-C1 MAIN 16 26 4x10 4x16 120 275
BRANCH 10 24 4x4 4x692-C2 MAIN 25 41 4x25 4x35 192 385
BRANCH 10 33 4x16 4x2592-C3 MAIN 29 40 4x70 4x95 230 520
BRANCH 20 30 4x35 4x35
THE SCOTCHCAST BRANCH AND TEESPLICING KIT When selecting a Scotchcast kit, the governing factor is the
outer diameters of the cables being used.The selection chartsare designed on circumstances most often met. In certaincircumstances, it may be necessary to use a smaller or larger kitthan recommended.
KIT SELECTION
* NOTE 1: MAXIMUM CABLE DIAMETER - 55 MM ARMOURED65 MM NON ARMOURED
92-B192-B391-B1691-B171
92-C192-C291-C3
3M
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Termination Kits and Joints
ALPHA LightsP.O.BOX: 19566 RIYADH 11445 Saudi Arabia, Tel. 01-4032443, Tel. 01-4040464, Fax 01-4053474
Top Related