System and host information
You can see from this screen that it has defaulted to 155.98.0.0 for the scan for servers. It should be 155.98.58.0 Here is the relivevent network configuration information for the server
uv:~ # ifconfig -a eth2 Link encap:Ethernet HWaddr 00:E0:ED:0F:9E:18 inet addr:155.98.58.12 Bcast:155.98.58.63 Mask:255.255.255.192
uv:~ # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 155.98.58.0 * 255.255.255.192 U 0 0 0 eth2
Blank configuration for the Automatic server registration
This is if I try and set to proper IP range 155.98.58.0 this page is again blank after I click save
The main issue is that the default IP address range that is getting scanned is 155.98.0.0 and not 155.98.58.0 as it should be. Even with “ Check for new servers?” set to “no” the scan still runs although it is not clear what triggers the scan.
Top Related