Surtronic S-100 seriesRobust and portable surface roughness testers
2
Durable roughness testers for shop floor, industrial & inspection room applications
Working closely with manufacturers across a
wide range of industries including precision
bearings, automotive and aerospace
engineering, Taylor Hobson have focussed on
the key attributes that are most important for
quality control in today’s precision industries.
The new Surtronic S-100 series of
instruments offer a versatile solution for all
your roughness requirements with a variety
of systems and application specific accessories
along with fixtures that can be tailored to
your specific need.
Measure Tactile measurement button, great when device is being used overhead or inside pipes
Anti-slip feet Perfect for mounting on flat or curved surfaces. V design aligns measurement with cylinder axis
Rubberised moulding Added protection and better grip in the hand invaluable in shop floor environments
A range of roughness testers robust enough for the shop floor and flexible enough for any inspection room.
USB Connectivity
Through its industry standard Type A USB port and mini USB port the S-100 series instruments provide extensive connectivity options to many standard devices.
USB type A
The Type A USB port can be used to attach a portable printer (ESC/POS compatible), see ‘Accessories’ page or a standard USB storage device for recording results, raw data or screen images.
USB mini
The mini USB port can be used for charging (with any standard USB charger) and / or connection to a PC to provide further analysis and reporting functionality.
Lift/lower Supplied as standard providing 50 mm height adjustment, right angle measurement and 70 mm reach into bores
Surtronic® S-100 series
Comfort grip Sits comfortably in the hand when reviewing results or changing settings
2
3
Simple set up Shortcuts provided for all the key settings to give instant access with just a single touch
Profile graph Detailed graph shows measured area to help identify problem areas
Orientation Rotate the display to any of of 4 orientations – perfect for awkward measurements
USB 2.0 type A attach a portable printer or USB storage device
USB 2.0 mini for charging (with any standard USB charger) and / or connection to a PC for data transfer
Standards and traceability
The reference standard supplied can be used both to calibrate the instrument and check for stylus wear to ensure the most accurate results are always being achieved.
UKAS Calibration and Testing
Taylor Hobson provides full certification for artefacts and instruments in our purpose built ISO graded clean room UKAS facility. Our UKAS laboratory is able to measure all of the parameters associated with surface texture, including French, German, USA and Japanese derivatives.
Measurement Best capability
Roughness standards (Ra)
±(2% + 0.004 µm)
Workpiece or component surface
texture (Ra)
±3% of measured value per trace
Any surface, any height
The inclusion of a 50 mm stylus lift with right-angle attachment and more than 70 mm stylus reach means that even the most challenging surfaces can be measured without the need for expensive riser blocks, stands or fixtures. The anti-slip V-feet also mean the system can be used on flat or curved surfaces. The stylus can even measure upside down!
FeaturesImprove throughput
Reduce part scrappage
Monitor tool wear
Ensure traceability
3
0026
2624
4
Tough, fast and reliable handheld roughness testers…Durable roughness testers for shop floor, industrial & inspection room applications
Fast and reliable
Simply press the measurement button and in a few seconds a full set of traceable measurement results including a detailed profile graph will be displayed or printed automatically, printer optional.
Built to last, by design…
Impact resistant rubberised mouldings surround a recessed, Mylar protected high durability touch screen and a solid stainless steel drive mechanism with anti-wear gears and bearings. System power is provided by a 3000 mAh heavy duty Li-Poly battery that can provide up to 2000 measurements from a single charge.
InstantOn
By utilising InstantOn technology these instruments are ready to measure in less than 1 second from standby and fully charged can remain in standby for more than 5000 hours!
In situ measurements
Monitor wear and roughness changes in situ during product’s life. Eg. Monitoring changes in turbine blade roughness as an early warning sign for defects and efficiency losses.
User-friendly, not user-hostile!
The Surtronic S-100 series systems are as easy to use as any SatNav (GPS) or SmartPhone with a 4.3” daylight readable industrial touch screen display. Results are displayed with up to 7 parameters per page as well as measurement settings and system information.
Process controlGrinding, turning, milling, honing, polishing,
extrusion
AutomotiveGears, con rods, cylinders,
blocks, crankshafts
Heavy industryShipbuilding, pipelines, sheet steel
AerospaceTurbine blades, turbine shafts,
wing composites
OtherPrint rollers, flooring, bonding
5
Fully integrated measurement solution By selecting a Surtronic S-100 series stand and printer (see ‘Accessories’ page) a fully integrated roughness measurement station can be realised. Roughness measurements can be easily made on multiple parts, results stored internally or on a standard USB memory device and printed to accompany the part to its next stage of manufacture or end user.
6
Advanced surface finish analysis
Talyprofile is a dedicated PC based software package designed for use with Surtronic S-100 series instruments. Three versions are available. Talyprofile “Lite” has all functions typically used for a shopfloor inspection, Talyprofile “Silver“ has enhanced features for R&W parameters, a statistics module and full report printing and Talyprofile “Gold“ has complete laboratory analysis functions:
Outstanding graphics
The software is visually advanced and provides clear on screen profile images. Talyprofile allows the user to take a basic measurement and create a full measurement report using the software’s detailed analysis options and desktop publishing function (see screen displays opposite for examples).
Advanced time-saving analysis templates
A ‘template’ can be created whereby a sequence of analysis functions can be saved and applied to future measurements, turning detailed reporting tasks into routine documents.
Desktop publishing facility
Talyprofile offers a comprehensive desk top publishing function which allows clear presentation of measurements, results and profiles. Graphs, profiles and results can be arranged from within the Talyprofile software or copied into other wordprocessing documents giving complete flexibility in reporting.
In depth analysis
Profiles can be levelled and zoomed to remove unwanted features or defects from the analysis. Distance measurement between features of a profile are easily achieved and the information can be displayed graphically and numerically. Step height and the area of a valley or peak can also be calculated.
Full compatibility
Surface finish results from other Taylor Hobson surface roughness instruments can be imported to Talyprofile software, allowing a uniform report style to be used throughout your workshop or laboratory
PC specification
Minimum Recommended
Operating system Windows XP Windows 8
Memory (RAM) 1 GB 3 GB
CPU speed 1 GHz 2 GHz
Screen resolution 1024 x 768 1920 x 1080
USB port 1.1 2.0
Talyprofile parameters
Roughness parameters obtained by Ra, Rq, Rt, Rp, Ry, Rku, Rsk,
RPC, RzJIS, R3z.
Pa, Pq, Pt, Pp, Pv, Pku, Psk,
Parameters obtained by double Rk, Rpk, Rvk, MR1,
MR2, A1, A2, Rpk, Rvk
Parameters obtained by the motifs R, AR, Pt, Rx, SR,
SAR, Nr, Kr, W, AW, Wte, Wx, SW, SAW, Nw, Kw, Rke, Rpke, Rvke, Trc, HTrc.
*Only with gold or silver versions
Talyprofile
Surtronic S-series acquisition
Desktop publishing templates
Multi-language support
EN, FR, DE, ES, IT, PL, CN, KR
Levelling
Symmetries
Zoom
ISO 4287
Material Ratio Curve
Area of a hole/peak
Profile parameters & curves
Roughness & waviness curves
Distance measurement
Multiple file format reports
Report printing
Form Talysurf data import
Tolerance limits (pass/fail)
Data file explorer
ISO 13565 Automotive
Interactive MR curve
Step height measurement
Form removal
Filtering by FFT
Thresholding
Frequency spectrum
Power spectrum density
Retouch profile point
Rk parameters
Rk Parameters curves
ISO 12085 R&W motifs
Gold
Silver
Lite
talyprofile.com
Talyprofile Lite is available to use
for FREE
13
Accessories
6
7
9
10
1
11
3
4
125
1 USB Thermal PrinterCompact & highspeed 60 mm (24 in) / second. Includes USB lead and International Power Supply Outputs settings, results, and high resolution graphcode PR-60
2 Thermal Paper 79 mm width, type. A single unit of paper is 20 x 12.5 metre rolls code PR-61
3 Column and StandGranite base (400 x 250 mm) with manually operated column providing adjustment height of 260 mm code SA-80
4 Precision ViceHigh quality precision vice ideal for holding small components. Jaw width 63 mm, jaw depth 32 mm, jaw opening 85 mm code SA-31
5 Ball Joint ViceComprising a surface mounted swivel base and a wide jaw vice. Suitable for holding irregular shaped components.Overall length 280 mm, Jaw Width 54 mm, Jaw Opening 160 mm code SA-30
6 Support StandWith 4 degrees of freedom. Max measuring height of 430 mm and a range of 115 mm at a horizontal reach of 305–420 mm. code SA-85
Provides an independent straight datum requires pick-up to be fitted with the detachable skid, see below code SA-90
8For use with Datum Support Stand, clamped to the pick up body, this accessory is required for use with the Datum Support Stand. code SA-91
9 Pick-up LiftFor controlled lifting and lowering of the pickup to aid measurement setup. code SA-20
10 Portable Base Provides a support when used on machine tool applications. code SA-40
11 S-series Mains AdaptorInternational USB charger5V 1A 110-240VAC 50/60HzRecharges S116 / S128 in 4 hours code SC-10
12Provides extension to pick-up for measurements in deep holes.(100 mm extension) reach 160mm code SA-25(200 mm extension) reach 260mm code SA-28
13 Calibration StandardRa 6.0um (236 uin) code SC-20
2
8
8
Technical S-116 S-128
Languages Basic English, French, German, Italian, Spanish
Extended
Asian
Data output On-screen up to 7 results per page, selectable on-screen graph with XZ axis
Printer Output settings, results and high resolution profile graph
PC Connection Full data analysis with Talyprofile
Data storage Internal 100 measurement results, 1 raw profile
USB (4GB supplied) >39,000 raw profiles, up to 100,000 results per batch (>70 batches)
PC connection Unlimited data storage
SPC / stats Internal Optional Min, Max, Mean, StdDev of stored results
USB (4GB supplied) Optional ASCII export of all results for SPC
PC connection full SPC and tollerancing of all parameters using Talyprofile software
Battery Charger USB 5v 1A 110-240VAC 50/60Hz
Charging time 4 hours
Battery life 2000 measurements
Standby time 5000 hours
InstantOn max 1 sec from standby to ready to measure
Auto sleep function 30 sec - 6 hours
Surtronic S-series dimensions
Component capacity S-116 S-128
Physical specifications Weight including pickup 0.5 Kg (1.1 lbs)
Power source Li Poly rechargable battery
Operating conditions Temperature 5 - 40 °C (41 - 104 °F)
Humidity 0 - 80 % non-condensing
Storage conditions Temperature 0 - 50 °C (32 - 122 °F)
Humidity 0 - 80 % non-condensing
9
Measurement capability S-116 S-128
Gauge Range 200 um 100 um 10 um 400 um 100 um 10 um
Resolution 100 nm 20 nm 10 nm 50 nm 10 nm 5 nm
Noise floor (Ra) 250 nm 150 nm 100 nm 150 nm 100 nm 50 nm
Repeatability (Ra) 1 % of value + noise 0.5 % of value + noise
Pickup type Inductive
Gauge force 150-300 mg
Stylus tip radius 5 µm (200 µin) default / 2 µm (80 µin) or 10 µm (400 µin) optional
Measurement type Skidded
Calibration Process Automated software calibration routine
Standards Able to calibrate to ISO 4287 roughness standards
Analysis Filter cut-off 0.25 mm / 0.8 mm / 2.5 mm
Filter type 2CR / Gaussian
Evaluation length 0.25 mm - 12.5 mm (0.01 in - 0.49 in) 0.25 mm - 25.0 mm (0.01 in - 0.89 in)
Max X axis range 17.5 mm 25.5 mm
Speed Measuring speed 1 mm / sec (0.04 in / sec)
Returning speed 1.5 mm / sec (0.06 in / sec)
Analysis capability S-116 S-128
Parameters Standards ISO 4287, ISO 13565-1, ISO 13565-2, ASME 46.1, JIS 0601, N31007
ISO basic Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rmr, Rdq, Rpc, RSm, Rz1max
ISO advanced Optional Rk, A1, A2, Mr1, Mr2, Rpk, Rvk
ASME Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rdq, RSm, Rpm, Rda
JIS Ra, Rv, Rp, Rz, Rt, Rq, Rsk, Rmr, Rdq, RSm, RzJIS, Rc, Rku, Rdc
Other R3z (Daimler Benz)
ISO Primary OptionalPa, Pv, Pp, Pz, Pt, Pq, Psk, Pmr, Pdq,
Ppc, PSm, Pz1max
Units um / uin
Specification
1.0
0.3
2.4
3.2
6
60.8
60.2
60.8
66.1
Standard Pick-upFor general surface roughness measurementcode PK-02 (5 µm tip radius)code PK-03 (10 µm tip radius)
Small Bore Pick-upFor general use in small bores, grooves and on narrow surfaces code PK-01
For measuring in ‘O’ rings and narrow grooves up to a depth of 5.5 mm (0.22 in)
Right Angle Pick-upFor measurement at right angles to the direction of traverse code PK-05
For measuring along sharp edges or wire. Not for use on flat surfaces code PK-24
Side Skid Pick-upFor use on curved surfaces such as gear teeth code PK-31
Shoe Pick-upFor measuring rougher surfaces,particularly with the 2.5 mm (0.1 in) cut-off code PK-99
Recess Pick-upFor measuring into deep recessescode PK-06 recess 5.7 mm (0.23 in) with 5µm tip radiuscode PK-08 recess 25 mm (0.23 in)with 5µm tip radius (Other depths and tip radii available)
62.9
60.7
60.6
10
Ra is the most common parameter of roughness. It is the arithmetic mean of the absolute departures from the mean line.
Rq is the rms parameter corresponding to Ra
*Rv is the maximum depth of the profile below the mean line within the sampling length.
*Rp is the maximum height of the profile above the mean line within the sampling length.
Rt is the maximum peak to valley height of the profile in the assessment length.
*Rz = Rp + Rv and is the maximum peak to valley height of the profile within a sampling length.
Rz1max is the largest of the individual peak to valleys from each sample length.
Material Ratio Rmr (c) is the length of bearing surface (expressed as a percentage of the evaluation length at a depth c below the highest peak.
Material ratio curve above, shows how the ratio varies with level.
Rsk – Skewness – is the measure of the symmetry of the profile about the mean line. It will distinguish between asymmetrical profiles of the same Ra or Rq.
Rku – Kurtosis – is a measure of the sharpness of the surface profile.
also known as the ISO 10 point height in ISO 4287/1-1984, it is the average height difference between the five highest peaks and the five lowest valleys within the sampling length.
Rpk Reduced Peak Height is the top portion of the surface which will quickly be worn away when the engine begins to run.
Rk Kernel Roughness Depth is the long term running surface which will influence the performance and life of the cylinder.
Rvk Trough Depth is the oil retaining capability of the deep troughs which have been machined into the surface.
Mr1 is Material ratio corresponding to the upper limit of the roughness.
Mr2 is Material ratio corresponding to the lower limit of the roughness.
RSm is the mean spacing between profile peaks at the mean line within the sampling length.
RPc is the peak count and is the number of local peaks which project through a selectable band centred about the mean line.
R3z is the vertical mean from the third highest peak to the third lowest valley in a sample length over the assessment length. DB N31007 (1983)
R q is the rms slope of the profile within the sampling length. is the slope of the profile at any given point
Analysis
l1
X
X
Z
L
l2 l3 l4 l5
X
Z Rp1max
Rv1max
ProfileAmplitudedistribution curve
Rsk is negative
Rsk is positive
X
X
Z
l
X
Z
Rz1max
Zp3 Zv3 Zp1 Zv5 Zv4 Zv2Zv1
Zp5Zp2
Z
X
Zp4
R3y1
R3y2
R3y3
R3y4 R3y5
X
Z
c
b1 b2 b3 b4 bn
0%
100%ln
Level c
Rmr(c)
100%%0ln
Ra = 1
l |z(x)|
dx
l 0Rq =
1
l z2 (x)
dx
l 0
Rsk = 1 1
l z
3 (x) dx
Rq3
l 0
Rku = 1 1
l z
4 (x) dx
Rq4
l 0
R3z = 1
∑ i = N
R3zi = R3z1 +R3z2 + . . .+ R3zN
N i = 1 N
Rmr (c) = b1+b2+b3+b4 . . .+bn
x 100 = 100 ∑
i = n bi
ln ln i = l
Rz (Jis) = (
=
1 (∑
i = 5 Zp1 -∑
i = 5 Zv1) 5 i = 1 i = 1
Z S1 S2 S3 Sn
X
Percentage Material Ratio
Rpk
0 20 40 60 80 % 100
Rk
Rvk
Mr1 Mr2
Sele
ctab
le B
and
1 count 2 count 3 count 4 count
6 count5 count
X
Z
RPc =Number of counts
Assessment length (cm) = Peaks/cm
X
Z0
0s
0
0
0
R∆q = 1
l [θ (x)-θ ] 2dx
l 0θ =
1
l θ (x)
dx
l 0
11
i = 1
Surtronic® product range
Surtronic® Duo measures surface roughness at the touch of a button and shows the result on a large LCD window. Cycle time is about 5 seconds and the result is saved until another measurement is taken.
Ready to use out of the box
Battery life more than 5000 measurements
Parameters Range Resolution
Ra: 40 µm (1600 µin) 0.01 µm (0.4 µin)
Rz, Rv, Rp, Rt: 199 µm (7800 µin) 0.1 um (4 µin)
Form Talysurf Intra measures roughness, waviness and contour. A low cost, portable system for high level surface texture analysis on the shop floor.
form measurements are correct
Features
Gauge range / resolution 16nm @ 1mm range (0.63µin @ 0.04in) / 3nm @ 0.2mm range (0.12µin @ 0.008in)
Straightness accuracy 0.2 µm over any 20 mm (8 µin over any 0.78 in)
The Surtronic® R-80 is robust enough for the shop floor but accurate for any inspection area, giving a flexible solution for all roundness and form measurements.
Patented gauge orientation
Feature
Gauge resolution 30 nm (1.18 µin)
Spindle accuracy ±25 nm (0.98 µin)
Surtronic® R-100 Series builds on the robustness and ease-of-use of the R-80, offering a higher throughput and improved feature set that includes advanced harmonic analyses and a higher gauge resolution.
Robust, fast and easy-to-use
TM *
Throughput 3 parts / minute including set-up
Feature
Gauge resolution 6 nm (0.24 µin)
Spindle accuracy ±25 nm (0.98 µin)
* Centering attachment is supplied as standard with 120/125 models, or available to purchase as an accessory on other models.
Copyright© 2013 Taylor Hobson Surtronic S100_EN_11 Nov
Taylor Hobson UK (Global Headquarters)
PO Box 36, 2 New Star RoadLeicester, LE4 9JQ, England
Tel: +44 116 276 3771 Fax: +44 116 246 0579 email: [email protected]
Taylor Hobson FranceRond Point de l’Epine Champs
Batiment D, 78990 Elancourt, FranceTel: +33 130 68 89 30 Fax: +33 130 68 89 39
Taylor Hobson GermanyPostfach 4827, Kreuzberger Ring 6
65205 Wiesbaden, GermanyTel: +49 611 973040 Fax: +49 611 97304600
Taylor Hobson India1st Floor, Prestige Featherlite Tech Park
148, EPIP II Phase, Whitefield, Bangalore – 560 006Tel: +91 1860 2662 468 Fax: +91 80 6782 3232
Taylor Hobson ItalyVia De Barzi
20087 Robecco sul Naviglio, Milan, ItalyTel: +39 02 946 93401 Fax: +39 02 946 93450
Taylor Hobson Japan3F Shiba NBF Tower, 1-1-30, Shiba Daimon Minato-ku
Tokyo 105-0012, JapanTel: +81 (0) 3 6809-2406 Fax: +81 (0) 3 6809-2410
Taylor Hobson Korea#310, Gyeonggi R&DB Center, 906-5, lui-dong
Yeongtong-gu, Suwon, Gyeonggi, 443-766, KoreaTel: +82 31 888 5255 Fax: +82 31 888 5256
Taylor Hobson China Beijing OfficeWestern Section, 2nd Floor, Jing Dong Fang Building (B10)
No.10, Jiu Xian Qiao Road, Chaoyang District, Beijing, 100015, ChinaTel: +86 10 8526 2111 Fax: +86 10 8526 2141
Taylor Hobson China Shanghai OfficePart A, 1st Floor, No. 460 North Fute Road
Waigaoqiao Free Trade Zone, Shanghai, 200131, ChinaTel: +86 21 5868 5111-110 Fax: +86 21 5866 0969-110
Taylor Hobson SingaporeAMETEK Singapore, 10 Ang Mo Kio Street 65
No. 05-12 Techpoint, Singapore 569059Tel: +65 6484 2388 Ext 120 Fax: +65 6484 2388 Ext 120
Taylor Hobson USA1725 Western Drive
West Chicago, Illinois 60185, USATel: +1 630 621 3099 Fax: +1 630 231 1739
www.taylor-hobson.com
Serving a global market
Taylor Hobson is world renowned as a manufacturer of precision measuring instruments used for inspection in research and production facilities. Our equipment performs at nanometric levels of resolution and accuracy.
To complement our precision manufacturing capability we also offer a host of metrology support services to provide our customers with complete solutions to their measuring needs and total confidence in their results.
Contracted Services from Taylor Hobson
measurement of your production parts by skilled technicians using industry leading instruments in accord with ISO standards
practical, hands-on training courses for roundness and surface finish conducted by experienced metrologists
on-site instruction will lead to greater proficiency and higher productivity
certification for artifacts or instruments in our laboratory or at customer’s site
For the above services, contact our Center of Excellence:email: [email protected] or call: +44 116 276 3779
special purpose, dedicated metrology systems for demanding applications
contract machining services for high precision applications and industries
protect your metrology investment with a Talycare service cover plan
For the above services, contact our Sales Department:email: [email protected] or call: +44 116 246 2034
0026 2624
Top Related