SUB-ZERO DESIGN GUIDE
Contents
Built-In Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRO 48 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . 44
Integrated Refrigeration . . . . . . . . . . . . . . . . . . . . . . 50
Wine Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . 84
Sub-Zero Warranties . . . . . . . . . . . . . . . . . . . . . . . . . 92
Features and specifications are subject to change at anytime without notice. Visit subzero.com/specs for the mostup-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions inparentheses are millimeters unless otherwise specified.
MODELS BI-36RG AND BI-36F
Built-In Refrigeration 3
subzero.com/specs
Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, insideand out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preserva-tion makes the built-in line nothing short of revolutionary.
36"(914)
36"(914)
36"(914)
84"(2134)
BI-36R
36"(914)
36"(914)
84"(2134)
30"(762)
30"(762)
48"(1219)
48"(1219)
42"(1067)
42"(1067)
84"(2134)
36"(914)
BI-36RG BI-36F BI-30UGBI-30U BI-36U BI-36UG
BI-36S BI-42S BI-42SD BI-48S BI-48SD
BUILT-IN MODELS
KEY FEATURES
• Four distinct design approaches: framed, overlay,flush inset and stainless steel.
• Handle options coordinate with handles of Wolfcooking products.
• Dual refrigeration; two compressors preserve food’sgoodness in two sealed compartments.
• Energy efficient; many models are ENERGY STAR®
qualified.
• Advanced water filtration and air purification systems.
• Crisper and deli drawers form a lower-temperaturezone for produce and meats.
• Flip-up grille provides easy access for quick routinemaintenance.
• All models are Star-K certified.
Built-In Refrigeration 4
Built-In Design Options. A design classic is now even better. Four distinct design approaches provide limitlessflexibility for creating a beautiful kitchen. Lower-profile hinges enable the built-in units to blend more seamlessly withsurrounding cabinetry.
Framed. Custom cabinetrypanels slide into the door toblend into the kitchen design.Shown with full-length handleand louvered grille option forthe traditional Sub-Zero look.
Overlay. Custom cabinetoverlay panels can becombined with uniquehardware for design flexibility.Shown with pro handle optionto complement Wolf ranges.
Built-In Refrigeration 5
subzero.com/specs
Flush Inset. This designoption allows for a flush doorand grille. Stainless steel panelsare available as sales acces-sories. Shown with tubularhandle option to mirror Wolfbuilt-in ovens.
Stainless Steel. For aprofessional look, this designrequires no customization. Tocomplement the look of Wolfranges, choose the pro handleoption shown here.
Built-In Refrigeration 6
36" (914)
84"(2134)
24" (610)
4" (102)
733/4"(1873)
237/8"(606)
371/4"(946)
17"(432)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODELS BI-36R, BI-36RG AND BI-36F
Interior Capacity R cu ft (L) F cu ft (L)
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R 23.4 (663)
BI-36RG 23.2 (657)
BI-36F 22.8 (646)
OVER-AND-UNDER MODELS
BI-30U 13.0 (368) 4.1 (116)
BI-30UG 13.0 (368) 4.1 (116)
BI-36U 16.2 (459) 5.3 (150)
BI-36UG 16.1 (456) 5.3 ( 150)
SIDE-BY-SIDE MODELS
BI-36S 12.2 (346) 8.0 (227)
BI-42S 16.1 (456) 8.0 (227)
BI-42SD 16.0 (453) 8.1 (230)
BI-48S 18.8 (532) 9.5 (269)
BI-48SD 18.7 (530) 9.7 (265)
Shipping Weight lbs (kg)
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R 420 (191)
BI-36RG 430 (195)
BI-36F 406 (184)
OVER-AND-UNDER MODELS
BI-30U 462 (210)
BI-30UG 476 (216)
BI-36U 515 (234)
BI-36UG 529 (240)
SIDE-BY-SIDE MODELS
BI-36S 538 (244)
BI-42S 582 (264)
BI-42SD 608 (276)
BI-48S 630 (286)
BI-48SD 656 (298)
Shipping weights and overall dimensions are based onstainless steel models. For flush inset applications, add1/2" (13) to door clearance dimensions.
All Refrigerator / All Freezer Models
OVERALL DIMENSIONS
Built-In Models
SPECIFICATIONS
Built-In Refrigeration 7
subzero.com/specs
30" (762)
84"(2134)
24" (610)
4" (102)
503/4"(1289)
23"(584)
237/8"(606)
235/8"(600) 311/4"
(796)
141/2"(368)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODELS BI-30U AND BI-30UG
36" (914)
84"(2134)
24" (610)
4" (102)
503/4"(1289)
23"(584)
237/8"(606)
235/8"(600) 371/4"
(946)
17"(432)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODELS BI-36U AND BI-36UG
Over-and-Under Models
OVERALL DIMENSIONS
Built-In Refrigeration 8
Overall dimensions are based on stainless steel models.For flush inset applications, add 1/2" (13) to door clearancedimensions.
42" (1067)
84"(2134)
24" (610)
4" (102)
733/4"(1873)
237/8" (606)
237/8"(606)
261/4"(668)
121/2"(318)
83/4"(222)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODELS BI-42S AND BI-42SD
36" (914)
84"(2134)
24" (610)
4" (102)
733/4"(1873)
237/8"(606)
221/4"(565)
81/2"(216)
101/4"(260)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODEL BI-36S
Side-by-Side Models
OVERALL DIMENSIONS
Built-In Refrigeration 9
subzero.com/specs
48" (1219)
84"(2134)
24" (610)
4" (102)
733/4"(1873)
237/8" (606)
237/8"(606)
30"(762)
14"(356)
93/4"(248)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
Side-by-Side Models
OVERALL DIMENSIONS
MODELS BI-48S AND BI-48SD
Built-In Refrigeration 10
Opening Width A
BI-36R, BI-36RG and BI-36F 351/2" (902)
BI-30U and BI-30UG 291/2" (746)
BI-36U and BI-36UG 351/2" (902)
BI-36S 351/2" (902)
BI-42S and BI-42SD 411/2" (1054)
BI-48S and BI-48SD 471/2" (1206)
IMPORTANT NOTE: If two units are installed side by side,refer to pages 30–31 for dual standard installations.
Stainless steel models are ready to install out of the box.
UNIT WITH3/4" (19) PANEL
24" (610)OPENING
DEPTH
FRONT VIEWSIDE VIEW
TOP VIEW
AOPENING WIDTH
24" (610)OPENING DEPTH
833/4"(2127)
OPENINGHEIGHT
Built-In Models
STANDARD INSTALLATION
Built-In Refrigeration 11
subzero.com/specs
Electrical Requirements
Power Supply 115 V AC, 60 Hz
Circuit Breaker 15 amp
Receptacle 3-prong grounding-type
Plumbing Requirements
Water Supply Line 1/4" OD copper line
Water Pressure 30–100 psi (2.1–6.9 bar)
Excess Water Line for Connection 36" (914)
3" (76)
18" (457)
FRONT VIEW
FLOOR
6"(152)
Location of water supply—rear.
Location of water supply—bottom.
TOP VIEW
BACK WALL1/2"(13)
18" (457) 6"(152)
FRONT VIEW
751/2"(1918)FROMFLOOR
7"(178) E
6"(152)
Location of electrical supply.
Planning Information
ELECTRICAL REQUIREMENTS
For all built-in models, the electrical supply should belocated within the shaded area shown in the illustration.Follow the National Electrical Code and local codes andordinances when installing the receptacle. A separatecircuit servicing only this appliance is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.
PLUMBING REQUIREMENTS
All built-in models with an automatic ice maker come witha microbiological water filtration system. The water supplyline should be located within the shaded area shown in theillustrations. The water supply line should be connected tothe house supply with an easily accessible shut-off valvebetween the supply and the unit. Do not use self-piercingvalves. A saddle valve kit (4200880) is available throughyour authorized Sub-Zero dealer. The water line must notinterfere with installation of the anti-tip brackets.
IMPORTANT NOTE: A reverse osmosis system can beused provided there is constant water pressure of 30 psi(2.1 bar) to 100 psi (6.9 bar) supplied to the unit at alltimes. In this application, the microbiological water filtra-tion system should be set to bypass mode by removingthe water filter cartridge and inserting the bypass plug(7005018) available through your authorized Sub-Zerodealer. Installation instructions packed with the unit willoutline this procedure.
Built-In Refrigeration 12
Framed Application
IMPORTANT NOTE: The framed application is not aseparate model. This is an overlay unit in a framed appli-cation.
The framed panel design option is available for all built-inoverlay models. You must specify panels, full-lengthhandles and a framed grille insert to achieve the traditionalframed look. For exact door panel dimensions refer toframed panel specifications on the following pages. Alsorefer to the full-scale templates at the end of this sectionfor additional panel and handle considerations.
Optional extended full-length handles that provide addi-tional finger clearance for raised panels are availablethrough your authorized Sub-Zero dealer.
Framed Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)
All Other Framed Panels 50 lbs (23 kg)
MIN PANEL THICKNESS
All Framed Panels 1/4" (6)
Custom cabinetry panels slide into the door to blend into thekitchen design. Shown with full-length handle and louveredgrille option for the traditional Sub-Zero look.
Built-In Refrigeration 13
subzero.com/specs
Framed Panels
If the thickness of the custom panels is less than 1/4" (6),they must be backed up with a sheet of shim material tobuild the total thickness to 1/4" (6). If the panel is thickerthan 1/4" (6), a routed edge must be provided around thepanel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE: For framed design applications,routing, recessing or optional extended handles may berequired on raised panels for finger clearance under thehandle. Refer to the full-scale templates at the end of thissection.
IMPORTANT NOTE: Do not cover a glass door with a solidpanel. Also, the edges of the window cut-out will need tobe finished, as they will be exposed.
IMPORTANT NOTE: When installing two units in a side-by-side application, refer to pages 30–31 for dual standardinstallations. Be aware that rough opening dimensions aredifferent for this application.
1/4" (6)PANEL
TRIMREVEAL
1/4" (6) min
DOOR
MAIN FRAME
Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).
TRIMREVEAL
1/4" (6) min
ROUT TO1/4" (6) DOOR
MAIN FRAME
Built-In Refrigeration 14
Models BI-30U and BI-30UG
REFRIGERATOR W H
Door Panel 293/4" (756) 4915/16" (1268)
FREEZER W H
Drawer Panel 293/4" (756) 1811/16" (475)
BI-30UG W H
Window Cut-Out 191/2" (495) 3911/16" (1008)
A
Cut-Out Location 53/16" (132)
Models BI-36U and BI-36UG
REFRIGERATOR W H
Door Panel 353/4" (908) 4915/16" (1268)
FREEZER W H
Drawer Panel 353/4" (908) 1811/16" (475)
BI-36UG W H
Window Cut-Out 251/2" (648) 3911/16" (1008)
A
Cut-Out Location 53/16" (132)
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR/FREEZER W H
Door Panel 353/4" (908) 699/16" (1767)
BI-36RG W H
Window Cut-Out 251/2" (648) 541/16" (1373)
A B
Cut-Out Location 53/16" (132) 105/16" (262)
Framed Panels
BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG
H
W
H
W
AA
A
B
H
H
W
AA
A
A
H
H
W
Built-In Refrigeration 15
subzero.com/specs
For models BI-42SD and BI-48SD, panel thickness in thedispenser area can range from 1/4" (6) to a maximum of11/8" (29). If the panel is thicker, you must rout out a minimum1/4" (6) flat landing area to accommodate the glasswell bezel.
Model BI-36S
REFRIGERATOR W H
Door Panel 1913/16" (503) 699/16" (1767)
FREEZER W H
Door Panel 157/16" (392) 699/16" (1767)
Models BI-42S and BI-42SD
REFRIGERATOR W H
Door Panel 2413/16" (630) 699/16" (1767)
FREEZER W H
Door Panel 167/16" (418) 699/16" (1767)
BI-42SD W H
Dispenser Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 17/8" (48) 283/4" (730)
Models BI-48S and BI-48SD
REFRIGERATOR W H
Door Panel 281/2" (724) 699/16" (1767)
FREEZER W H
Door Panel 183/4" (476) 699/16" (1767)
BI-48SD W H
Dispenser Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 17/8" (48) 283/4" (730)
Framed Panels
BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD
H
WW
H
WW
B
A
Built-In Refrigeration 16
Framed Application
OPTIONAL GRILLE PANEL
A panel grille, providing an 84" (2134) finished height, isstandard on overlay models. Optional panel grilles areavailable for 83" (2108) and 88" (2235) finished heights.
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract1" (25) from grille panel height dimensions. For an 88"(2235) finished height, add 4" (102) to height dimensions.
Optional grille panel.
Optional Grille Panel W H
30" (762) Models 293/4" (756) 815/16" (227)
36" (914) Models 353/4" (908) 815/16" (227)
42" (1067) Models 413/4" (1060) 815/16" (227)
48" (1219) Models 473/4" (1213) 815/16" (227)
Grille Panel Requirements
MAX WEIGHT
Grille Panel 13 lbs (6 kg)
MIN PANEL THICKNESS
Grille Panel 1/4" (6)
Built-In Refrigeration 17
subzero.com/specs
Framed Application
PARTIAL FRAMED OPTION
If you choose not to use custom panels above and belowthe glasswell for dispenser model BI-42SD or BI-48SD, astainless steel insert panel is available as a sales acces-sory. This accessory kit includes partial framed moldingand stainless steel panel to provide a spill-resistant finishabove and below the glasswell on the refrigerator dooronly. The partial framed accessory kit (7004855) isavailable through your authorized Sub-Zero dealer. Referto panel dimensions for the partial framed option below.
IMPORTANT NOTE: When using raised panels with thepartial framed kit, a 1/2" (13) trim reveal down to 1/4" (6)thickness is necessary at the bezel for the panels to fitproperly.
Optional Partial Framed Panels
BI-42SD W H
Refrigerator Panel 151/16" (383) 699/16" (1767)
Freezer Panel 167/16" (418) 699/16" (1767)
BI-48SD W H
Refrigerator Panel 163/4" (425) 699/16" (1767)
Freezer Panel 183/4" (476) 699/16" (1767)
WW
H
BI-42SD / BI-48SDPartial framed option.
Partial framed kit.
Built-In Refrigeration 18
Overlay Panels
If you and your client have ordered an overlay model, youwill be adding panels and handles to give the unit a morecustom look. The overlay panel design option is availablefor all built-in overlay models. For exact door panel dimen-sions, refer to overlay panel specifications on the followingpages.
IMPORTANT NOTE: Overlay models can be used in anoverlay or a flush inset application. Be aware that theapplication specified will affect panel sizes, rough openingdimensions and installation.
The overlay design allows decorative panels to cover thedoor trim for a more seamless appearance that blendswith the design of the room. The most common way toachieve this look is to work with three panels—the decora-tive overlay panel, which is typically 3/4" (19), a .10" (3)spacer panel and a 1/4" (6) backer panel. Depending onyour cabinet manufacturer, this could also be one panelrouted for different dimensions.
Regardless of the physical construction of the panels(three-panel assembly or routed panel), you will need tofollow the overlay panel specifications on the followingpages for exact sizing and panel placement to ensure aproper fit.
Custom cabinet overlay panels can be combined with uniquehardware for design flexibility. Shown with pro handle optionto complement Wolf ranges and rangetops.
Overlay Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)
All Other Overlay Models 50 lbs (23 kg)
Grille Panel 13 lbs (6 kg)
MIN PANEL THICKNESS
All Overlay Panels 5/8" (16)
Built-In Refrigeration 19
subzero.com/specs
Overlay Panels
The illustrations provide a cross section view of the three-panel assembly, showing placement of the trim and a rearview of the three-panel assembly with critical dimensions,standard for all built-in models.
Overlay grille panels for the panel grille match the designof the overlay door panels. Dimensions for the grille panelare listed in the overlay panel specifications on the follow-ing pages.
IMPORTANT NOTE: On glass door models, the edges ofthe overlay, spacer and backer panels of the windowcut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: When installing two units in a side-by-side application, refer to pages 30–31 for dual standardinstallations. Be aware that rough opening dimensions aredifferent for this application.
1/8"(3)
OVERLAY PANEL
SPACER PANEL
BACKER PANEL
TRIM
5/16" (8) min
Panel assembly cross section. Panel assembly rear view.
1/4" (6).10" (3)
OVERLAYPANEL
SPACERPANEL
BACKERPANEL
3/4"(19)
typical
Do not exceed overlay panel dimensions, as this couldcause damage to panels and the Sub-Zero unit.
Built-In Refrigeration 20
Overlay Panels
BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
A
A
H
H
H
W
*Panel height may be increased by 1/2" (13) to hide uppermain frame. For more information, refer to the built-in panelconfigurator at subzero.com/trade/panels.
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. An 83"(2108) or 88" (2235) panel grille must be ordered to accept an83" (2108) or 88" (2235) custom panel. Width dimensions donot vary.
Models BI-30U and BI-30UG
REFRIGERATOR W H
Overlay Panel 30" (762) 501/8" (1273)
Spacer Panel 291/8" (740) 495/16" (1253)
Backer Panel 293/4" (756) 4915/16" (1268)
FREEZER W H
Overlay Panel 30" (762) 19" (483)
Spacer Panel 291/8" (740) 181/16" (459)
Backer Panel 293/4" (756) 1811/16" (475)
GRILLE W H
Overlay Panel 30" (762) 91/4" (235)*Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
BI-30UG W H
Window Cut-Out 191/2" (495) 395/8" (1006)
A
Cut-Out Location 51/4" (133)
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER W H
Overlay Panel 36" (914) 693/4" (1772)
Spacer Panel 351/8" (892) 6815/16" (1751)
Backer Panel 353/4" (908) 699/16" (1767)
GRILLE W H
Overlay Panel 36" (914) 91/4" (235)*Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36RG W H
Window Cut-Out 251/2" (648) 541/8" (1375)
A B
Cut-Out Location 51/4" (133) 103/8" (264)
Models BI-36U and BI-36UG
REFRIGERATOR W H
Overlay Panel 36" (914) 501/8" (1273)
Spacer Panel 351/8" (892) 495/16" (1253)
Backer Panel 353/4" (908) 4915/16" (1268)
FREEZER W H
Overlay Panel 36" (914) 19" (483)
Spacer Panel 351/8" (892) 181/16" (459)
Backer Panel 353/4" (908) 1811/16" (475)
GRILLE W H
Overlay Panel 36" (914) 91/4" (235)*Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36UG W H
Window Cut-Out 251/2" (648) 395/8" (1006)
A
Cut-Out Location 51/4" (133)
Built-In Refrigeration 21
subzero.com/specs
Overlay Panels
BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD
H
H
WW
H
H
WW
B
A
*Panel height may be increased by 1/2" (13) to hide uppermain frame. For more information, refer to the built-in panelconfigurator at subzero.com/trade/panels.
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. An 83"(2108) or 88" (2235) panel grille must be ordered to accept an83" (2108) or 88" (2235) custom panel. Width dimensions donot vary.
Models BI-48S and BI-48SD
REFRIGERATOR W H
Overlay Panel 283/4" (730) 693/4" (1772)
Spacer Panel 277/8" (708) 6815/16" (1751)
Backer Panel 281/2" (724) 699/16" (1767)
FREEZER W H
Overlay Panel 19" (483) 693/4" (1772)
Spacer Panel 181/8" (460) 6815/16" (1751)
Backer Panel 183/4" (476) 699/16" (1767)
GRILLE W H
Overlay Panel 48" (1219) 91/4" (235)*Spacer Panel 471/8" (1197) 85/16" (211)
Backer Panel 473/4" (1213) 815/16" (227)
BI-48SD W H
Dispenser Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 2" (51) 2813/16" (732)
Models BI-42S and BI-42SD
REFRIGERATOR W H
Overlay Panel 251/16" (637) 693/4" (1772)
Spacer Panel 243/16" (614) 6815/16" (1751)
Backer Panel 2413/16" (630) 699/16" (1767)
FREEZER W H
Overlay Panel 1611/16" (424) 693/4" (1772)
Spacer Panel 1513/16" (402) 6815/16" (1751)
Backer Panel 167/16" (418) 699/16" (1767)
GRILLE W H
Overlay Panel 42" (1067) 91/4" (235)*Spacer Panel 411/8" (1045) 85/16" (211)
Backer Panel 413/4" (1060) 815/16" (227)
BI-42SD W H
Dispenser Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 2" (51) 2813/16" (732)
Model BI-36S
REFRIGERATOR W H
Overlay Panel 201/16" (510) 693/4" (1772)
Spacer Panel 193/16" (487) 6815/16" (1751)
Backer Panel 1913/16" (503) 699/16" (1767)
FREEZER W H
Overlay Panel 1511/16" (398) 693/4" (1772)
Spacer Panel 1413/16" (376) 6815/16" (1751)
Backer Panel 157/16" (392) 699/16" (1767)
GRILLE W H
Overlay Panel 36" (914) 91/4" (235)*Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
Built-In Refrigeration 22
This design option allows for a flush door and grille. Stainlesssteel panels are available as sales accessories. Shown withtubular handle option to mirror Wolfbuilt-in ovens.
Flush Inset Application
It is necessary to consider the following points whenplanning for a flush inset application:
• The flush inset depth is 23/16" (56) deeper than thestandard opening.
• The flush inset width is 21/2" (64) wider than thestandard opening.
• The flush inset height is 1/4" (6) higher than thestandard opening.
• Panel widths increase to achieve the flush inset look.
• You must allow a 1/2" (13) reveal around the perimeterof the unit and grille to allow for proper door swing andairflow.
IMPORTANT NOTE: The flush inset application is not aseparate model. This is an overlay unit in a flush installa-tion. The same model is used in an overlay or flush insetapplication.
Rough opening dimensions for the flush inset applicationassume the use of a 3/4" (19) decorative panel. Theillustrations below show the difference between standardand flush inset installations.
STANDARD INSTALLATION
24" (610)OPENING
DEPTH
TOP VIEW
Standard installation. Flush inset installation.
263/16"(665)
FLUSHINSETDEPTH
23/16"(56)
11/4"(32)
TOP VIEW
FLUSH INSET INSTALLATIONWITH 3/4" (19) PANEL
24" (610)OPENING
DEPTH
Built-In Refrigeration 23
subzero.com/specs
Flush Inset Opening Widths A B
BI-36R, BI-36RG and BI-36F 351/2" (902) 38" (965)
BI-30U and BI-30UG 291/2" (746) 32" (813)
BI-36U and BI-36UG 351/2" (902) 38" (965)
BI-36S 351/2" (902) 38" (965)
BI-42S and BI-42SD 411/2" (1054) 44" (1118)
BI-48S and BI-48SD 471/2" (1206) 50" (1270)
IMPORTANT NOTE: Dimensions assume a 3/4" (19) panelthickness.
IMPORTANT NOTE: If two units are installed side by side,refer to pages 32–36 for dual flush inset installations.
UNIT WITH3/4" (19) PANEL
DETAIL A
DETAIL B
FRONT VIEW
AWIDTH TO CLEAT
BFLUSH INSET WIDTH
11/4"(32)
11/4"(32)
SIDE VIEW
84"(2134)FLUSHINSET
HEIGHT
1/4"(6)
24" (610)DEPTH TO CLEAT
263/16" (665)FLUSH INSET DEPTH
23/16"(56)
833/4"(2127)
HEIGHTTO CLEAT
24" (610)DEPTH
TO CLEAT
263/16"(665)
FLUSHINSETDEPTH
TOP VIEW
23/16"(56)
11/4"(32) CLEAT
CLEAT
Detail A
Detail B
11/4"(32)
24" (610)OPENING
DEPTHTO CLEAT
CLEAT
TOP VIEW263/16"(665)
FLUSHINSETDEPTH
23/16" (56)
3" (76)typical
24" (610)OPENINGDEPTH TO
CLEAT
11/4"(32)
23/16" (56)
CLEAT
SHADEDAREA
MUST BEFINISHED
3" typical(76)
4" (102)
Built-In Models
FLUSH INSET INSTALLATION
Built-In Refrigeration 24
Flush Inset Panels
The flush inset application allows decorative panels on thefront of the unit to be flush with surrounding cabinetry andis available for all built-in overlay models. For exact paneldimensions, refer to flush inset panel specifications on thefollowing pages.
The flush inset design allows decorative panels to coverthe door trim for a seamless appearance that blends withthe design of the room. The most common way to achievethis look is to work with three panels—the decorative flushinset panel, which is typically 3/4" (19), a .10" (3) spacerpanel and a 1/4" (6) backer panel. Depending on yourcabinet manufacturer, this could also be one panel routedfor different dimensions.
Regardless of the physical construction of the panels(three-panel assembly or routed panel), you will need tofollow the flush inset panel specifications on the followingpages for exact sizing and panel placement to ensure aproper fit.
Flush Inset Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)
All Other Flush Inset Models 50 lbs (23 kg)
Grille Panel 13 lbs (6 kg)
MIN PANEL THICKNESS
All Flush Inset Panels 5/8" (16)1/4" (6).10" (3)
FLUSH INSETPANEL
SPACERPANEL
BACKERPANEL
3/4"(19)
typical
Three-panel assembly.
The illustration below provides a rear view of the three-panel assembly with critical dimensions, standard for allbuilt-in models.
IMPORTANT NOTE: The inside edges of the rough openingas well as the sides and a portion of the back side of thedecorative panels will need to be finished, as they will beexposed when the doors are open.
IMPORTANT NOTE: On glass door models, the edges ofthe overlay, spacer and backer panels of the windowcut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: For flush inset panels thicker than3/4" (19), a 90˚ door stop may be required to prevent inter-ference with adjacent cabinets. Refer to the full-scale tem-plates at the end of this section.
IMPORTANT NOTE: When installing two units side by sidein a flush inset application, refer to pages 32–36 for dualflush inset installations. Be aware that rough openingdimensions, panel sizes and offsets are different for thisapplication.
Do not exceed flush inset panel dimensions, as thiscould cause damage to panels and the Sub-Zero unit.
Built-In Refrigeration 25
subzero.com/specs
5/8"(16)
5/16" (8) 1/2"(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A Illus. B
1/4" (6)REVEAL
5/16" (8)1/8" (3)
DOOR DOOR
TOP VIEW
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
SIDE VIEW
Illus. C Illus. D
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
SIDE VIEW
5/8" (16)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
SIDE VIEW
Illus. E Illus. F
5/16"(8)
3/32"(2)
DOOR /DRAWER
SIDE VIEW
Panel Offsets Illus.
ALL REFRIGERATOR / ALL FREEZER
Door / Grille Sides AGrille Top CGrille Bottom / Door Top DDoor Bottom F
OVER-AND-UNDER
Door / Drawer / Grille Sides AGrille Top CGrille Bottom / Door Top DDoor Bottom / Drawer Top EDrawer Bottom F
SIDE-BY-SIDE
Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom F
Flush Inset Panels
PANEL OFFSETS
Illustrations A–F provide panel offsets and reveals for allbuilt-in models in a flush inset application. Refer to thechart below for reference to the illustrations relating toyour specific model.
For additional information on model-specific panel reveals,visit the specification library section of our website,subzerotrade.com.
Built-In Refrigeration 26
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. An 83"(2108) or 88" (2235) panel grille must be ordered to accept an83" (2108) or 88" (2235) custom panel. Width dimensions donot vary.
Flush Inset Panels
Models BI-30U and BI-30UG
REFRIGERATOR W H
Flush Inset Panel 31" (787) 501/8" (1273)
Spacer Panel 291/8" (740) 495/16" (1253)
Backer Panel 293/4" (756) 4915/16" (1268)
FREEZER W H
Flush Inset Panel 31" (787) 19" (483)
Spacer Panel 291/8" (740) 181/16" (459)
Backer Panel 293/4" (756) 1811/16" (475)
GRILLE W H
Flush Inset Panel 31" (787) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
BI-30UG W H
Window Cut-Out 191/2" (495) 395/8" (1006)
A B
Cut-Out Location 53/4" (146) 51/4" (133)
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER W H
Flush Inset Panel 37" (940) 693/4" (1772)
Spacer Panel 351/8" (892) 6815/16" (1751)
Backer Panel 353/4" (908) 699/16" (1767)
GRILLE W H
Flush Inset Panel 37" (940) 91/4" (235)
Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36RG W H
Window Cut-Out 251/2" (648) 541/8" (1375)
A B
Cut-Out Location 53/4" (146) 103/8" (264)
Models BI-36U and BI-36UG
REFRIGERATOR W H
Flush Inset Panel 37" (940) 501/8" (1273)
Spacer Panel 351/8" (892) 495/16" (1253)
Backer Panel 353/4" (908) 4915/16" (1268)
FREEZER W H
Flush Inset Panel 37" (940) 19" (483)
Spacer Panel 351/8" (892) 181/16" (459)
Backer Panel 353/4" (908) 1811/16" (475)
GRILLE W H
Flush Inset Panel 37" (940) 91/4" (235)
Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36UG W H
Window Cut-Out 251/2" (648) 395/8" (1006)
A B
Cut-Out Location 53/4" (146) 51/4" (133)
BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
A
A
H
H
H
W
Built-In Refrigeration 27
subzero.com/specs
Flush Inset Panels
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. An 83"(2108) or 88" (2235) panel grille must be ordered to accept an83" (2108) or 88" (2235) custom panel. Width dimensions donot vary.
Models BI-48S and BI-48SD
REFRIGERATOR W H
Flush Inset Panel 291/4" (743) 693/4" (1772)
Spacer Panel 277/8" (708) 6815/16" (1751)
Backer Panel 281/2" (724) 699/16" (1767)
FREEZER W H
Flush Inset Panel 191/2" (495) 693/4" (1772)
Spacer Panel 181/8" (460) 6815/16" (1751)
Backer Panel 183/4" (476) 699/16" (1767)
GRILLE W H
Flush Inset Panel 49" (1245) 91/4" (235)
Spacer Panel 471/8" (1197) 85/16" (211)
Backer Panel 473/4" (1213) 815/16" (227)
DISPENSER (BI-48SD) W H
Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 2" (51) 2813/16" (732)
Models BI-42S and BI-42SD
REFRIGERATOR W H
Flush Inset Panel 259/16" (649) 693/4" (1772)
Spacer Panel 243/16" (614) 6815/16" (1751)
Backer Panel 2413/16" (630) 699/16" (1767)
FREEZER W H
Flush Inset Panel 173/16" (437) 693/4" (1772)
Spacer Panel 1513/16" (402) 6815/16" (1751)
Backer Panel 167/16" (418) 699/16" (1767)
GRILLE W H
Flush Inset Panel 43" (1092) 91/4" (235)
Spacer Panel 411/8" (1045) 85/16" (211)
Backer Panel 413/4" (1060) 815/16" (227)
DISPENSER (BI-42SD) W H
Dispenser Cut-Out 57/8" (149) 127/16" (316)
A B
Cut-Out Location 2" (51) 2813/16" (732)
Model BI-36S
REFRIGERATOR W H
Flush Inset Panel 209/16" (522) 693/4" (1772)
Spacer Panel 193/16" (487) 6815/16" (1751)
Backer Panel 1913/16" (503) 699/16" (1767)
FREEZER W H
Flush Inset Panel 163/16" (411) 693/4" (1772)
Spacer Panel 1413/16" (376) 6815/16" (1751)
Backer Panel 157/16" (392) 699/16" (1767)
GRILLE W H
Flush Inset Panel 37" (940) 91/4" (235)
Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD
H
H
WW
H
H
WW
B
A
Built-In Refrigeration 28
Dispenser
MODELS BI-42SD AND BI-48SD
The refrigerator door panel must include a cut-out toaccommodate the dispenser glasswell and bezel. Thethickness of the panel in this area can range from 1/4" (6)to a maximum of 11/8" (29).
IMPORTANT NOTE: Regardless of the thickness of thepanel for model BI-42SD or BI-48SD, you must plan for aflat landing area for the decorative bezel surrounding theglasswell area. The illustration to the right provides exactbezel dimensions. Refer to the appropriate panel specifi-cations page for exact cut-out location. This landing areacan be accomplished in a number of different ways. Thesephotos show two options.
One option (flush) is to rout the panel so the bezel will beflush with rails and stiles. You must rout a space toaccommodate the height and width of the bezel. Thewidth of the stile immediately to the left of the bezel mustbe 13/4" (44). Do not cut the entire stile to this dimension.
The other option (proud) shows a boxed out landing areafor the bezel using stiles and rails to create this space. Inthis application, the bezel will sit proud of the stiles andrails. The total thickness of the panels at this level mustnot exceed 11/8" (29).
Handle placement.
2"(51)
1"(25)
GLASSWELL
HANDLE
Flush option.
65/16" (160)
3/32"(2)
1/8" (3)RADIUS
5/8"(16)
127/8"(327)
Dispenser dimensions.
Proud option.
For overlay and flush inset models, mounting placement ofthe refrigerator door handle must assure proper access tothe glasswell and adequate clearance under the handle.The handle placement illustration shows the relation of therefrigerator door handle to the glasswell bezel on stainlesssteel models.
Built-In Refrigeration 29
subzero.com/specs
Routing detail.
MAINFRAME
SIDE PANELROUTING
1" (25)
17/8" (48)
1/8" (3)
1/2" (13)
Side Panels
Side panels can be used with every design application.When planning for side panels with the installation of abuilt-in model, you need to be aware of the space configu-ration to achieve a pleasing fit. Depending on the exactpanel you are using with your unit, the height of the panelmay vary.
IMPORTANT NOTE: The use of side panels may changethe width of your rough opening.
The side panel will need to be a minimum of 24" (610)deep and 1/2" (13) thick. Refer to the illustrations below forside panel dimensions. Routing will be necessary so thatthe side panel fits flush against the side of the unit.
84"(2134)
24" (610)
ROUT TO3/16" (5)
(OVER-AND-UNDERMODELS)
OPTIONALTOE KICKCUT-OUT
4" (102)
201/2"(521)
53/4"(146)
17/8"(48)
1" (25)
41/4" (108)
ROUT TO 1/8" (3)
FRONTOF SIDEPANEL
25/8"(67)
Side panel dimensions.
IMPORTANT NOTE: If you have a model BI-30U, BI-30UG,BI-36U or BI-36UG, extra routing will be necessary toprevent the panel from hitting the refrigerator lower hingeplate.
When installing a built-in unit with a custom side panel, anaccessory kit (7003407) is required. Stainless steel andwhite enamel side panels are also available through yourauthorized Sub-Zero dealer.
Built-In Refrigeration 30
Dual Installation
STANDARD APPLICATION
Two overlay or stainless steel units may be placed side byside in a dual installation. Some standard applications willrequire a dual installation kit, available through yourauthorized Sub-Zero dealer. If you are installing two unitsside by side in a flush inset application, refer to page 32.
A custom filler strip can be used between two units in aframed, overlay or stainless steel design application. It isrecommended that the filler strip be at least 2" (51) wide toprevent condensation between the units. Be sure to addthe filler strip width to your rough opening width. Refer tothe full-scale template on page 42.
Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustra-tion A, a dual installation accessory kit is required. Refer topage 36 for information on dual installation kits.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)
All Other Models 50 lbs (23 kg)
Dual Wide Grille Panel 26 lbs (12 kg)
MIN PANEL THICKNESS
Framed Panels 1/4" (6)
Overlay and Flush Inset Panels 5/8" (16)
Illus. A
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. B Illus. C
Dual installation—standard application.
Built-In Refrigeration 31
subzero.com/specs
Opening Widths A
Two 30" (762) Models 593/4" (1518)
30" (762) and 36" (914) Models 653/4" (1670)
Two 36" (914) Models 713/4" (1822)
IMPORTANT NOTE: A dual installation kit will be requiredfor this installation.
Stainless steel models are ready to install out of the box.
FRONT VIEWSIDE VIEW
TOP VIEW
833/4"(2127)
OPENINGHEIGHT
AOPENING WIDTH
24" (610)OPENING DEPTH
24" (610)OPENING
DEPTH
TWO UNITS WITH3/4" (19) PANEL
Dual Installation
STANDARD INSTALLATION
Built-In Refrigeration 32
Dual Installation
FLUSH INSET APPLICATION
Installing two built-in models side by side in a flush insetapplication will require adjustments to the dimensions ofyour finished rough opening, panel sizes and panel offsets.It will also require a dual installation kit, available throughyour authorized Sub-Zero dealer.
Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip. Refer to the full-scaletemplate on page 43. Illustration A is the only applicationthat will accommodate the dual wide grille.
IMPORTANT NOTE: The application shown in illustration Acan only be achieved by installing dual flush inset panels.Failure to install dual flush inset panels will cause thehandle side of the panels to collide when closing. In thisapplication a dual installation accessory kit is alsorequired.
Dual flush inset panels and dual installation kits are avail-able through your authorized Sub-Zero dealer. Refer topages 34–35 for dual flush inset panel specifications andpage 36 for information on dual installation kits.
Dual installation—flush inset application.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F 75 lbs (34 kg)
All Other Models 50 lbs (23 kg)
Dual Wide Grille Panel 26 lbs (12 kg)
MIN PANEL THICKNESS
Flush Inset Panels 5/8" (16)
Illus. A
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. B Illus. C
Built-In Refrigeration 33
subzero.com/specs
Opening Widths A B
Two 30" (762) Models 593/4" (1518) 621/4" (1581)
30" (762) and 36" (914) Models 653/4" (1670) 681/4" (1734)
Two 36" (914) Models 713/4" (1822) 741/4" (1886)
IMPORTANT NOTE: Dimensions assume a 3/4" (19) panelthickness. A dual installation kit will be required for thisinstallation.
24" (610)DEPTH
TO CLEAT
263/16"(665)
FLUSHINSETDEPTH
FRONT VIEW
TOP VIEW
23/16"(56)
AWIDTH TO CLEAT
BFLUSH INSET WIDTH
11/4"(32)
11/4"(32)
SIDE VIEW
84"(2134)FLUSHINSET
HEIGHT
1/4"(6)
24" (610)DEPTH TO CLEAT
263/16" (665)FLUSH INSET DEPTH
23/16"(56)
833/4"(2127)
HEIGHTTO CLEAT
CLEAT
TWO UNITS WITH3/4" (19) PANEL
DETAIL A
DETAIL B
11/4"(32) CLEAT
Detail A
Detail B
11/4"(32)
24" (610)OPENING
DEPTHTO CLEAT
CLEAT
TOP VIEW263/16"(665)
FLUSHINSETDEPTH
23/16" (56)
3" (76)typical
24" (610)OPENINGDEPTH TO
CLEAT
11/4"(32)
23/16" (56)
CLEAT
SHADEDAREA
MUST BEFINISHED
3" typical(76)
4" (102)
Dual Installation
FLUSH INSET INSTALLATION
Built-In Refrigeration 34
Dual Installation
FLUSH INSET PANEL OFFSETS
When installing two built-in models side by side in a flushinset application, you must decrease the width of the dec-orative flush inset panels by 1/2" (13). Adjustments to thepanel offsets will also need to be made. These adjust-ments are needed to achieve a proper fit and to ensure thepanels do not collide when closing. Panel dimensions inthe chart below have been adjusted to reflect thedecrease in panel dimensions.
IMPORTANT NOTE: If a filler strip is not used, dual instal-lations can only be accomplished using two units withopposite hinges.
Illustrations A–F provide panel offsets and reveals for allbuilt-in models in a flush inset application. Refer to thechart below for reference to the illustrations relating toyour specific model. All reveals are 1/2" (13) unless other-wise specified.
For additional information on model-specific panel reveals,visit the specification library section of our website,subzerotrade.com.
5/8"(16)
5/16" (8) 1/2"(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A Illus. B
DUALTRIM
1/4" (6)REVEAL
5/16" (8)1/8" (3)
DOOR DOOR
TOP VIEW
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
SIDE VIEW
Illus. C Illus. D
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
SIDE VIEW
5/8" (16)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
SIDE VIEW
Illus. E Illus. F
5/16"(8)
3/32"(2)
DOOR /DRAWER
SIDE VIEW
Panel Offsets Illus.
ALL REFRIGERATOR / ALL FREEZER
Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom F
OVER-AND-UNDER
Doors (hinge) / Drawer / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom / Drawer Top EDrawer Bottom F
Do not exceed flush inset panel dimensions, as thiscould cause damage to panels and the Sub-Zero unit.
Built-In Refrigeration 35
subzero.com/specs
Grille panel dimensions listed are for a standard 84" (2134)finished height. For an 83" (2108) finished height, subtract 1"(25) from grille panel height dimensions. For an 88" (2235)finished height, add 4" (102) to height dimensions. Widthdimensions do not vary.
For dual wide grilles, refer to page 36.
BI-30U and BI-30UG
REFRIGERATOR W H
Flush Inset Panel 301/2" (775) 501/8" (1273)
Spacer Panel 291/8" (740) 495/16" (1253)
Backer Panel 293/4" (756) 4915/16" (1268)
FREEZER W H
Flush Inset Panel 301/2" (775) 19" (483)
Spacer Panel 291/8" (740) 181/16" (459)
Backer Panel 293/4" (756) 1811/16" (475)
GRILLE W H
Flush Inset Panel 301/2" (775) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
BI-30UG W H
Window Cut-Out 19" (483) 395/8" (1006)
A B
Cut-Out Location 53/4" (146) 51/4" (133)
BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER W H
Flush Inset Panel 361/2" (927) 693/4" (1772)
Spacer Panel 351/8" (892) 6815/16" (1751)
Backer Panel 353/4" (908) 699/16" (1767)
GRILLE W H
Flush Inset Panel 361/2" (927) 91/4" (235)
Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36RG W H
Window Cut-Out 25" (635) 541/8" (1375)
A B
Cut-Out Location 53/4" (146) 103/8" (264)
BI-36U and BI-36UG
REFRIGERATOR W H
Flush Inset Panel 361/2" (927) 501/8" (1273)
Spacer Panel 351/8" (892) 495/16" (1253)
Backer Panel 353/4" (908) 4915/16" (1268)
FREEZER W H
Flush Inset Panel 361/2" (927) 19" (483)
Spacer Panel 351/8" (892) 181/16" (459)
Backer Panel 353/4" (908) 1811/16" (475)
GRILLE W H
Flush Inset Panel 361/2" (927) 91/4" (235)
Spacer Panel 351/8" (892) 85/16" (211)
Backer Panel 353/4" (908) 815/16" (227)
BI-36UG W H
Window Cut-Out 25" (635) 395/8" (1006)
A B
Cut-Out Location 53/4" (146) 51/4" (133)
Dual Installation—Flush Inset Panels
BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG
H
H
W
H
H
W
AA
A
B
H
H
H
W
AA
A
A
H
H
H
W
Built-In Refrigeration 36
Dual Installation Kit
INSTALLATION WITH DUAL WIDE GRILLE
This kit will replace the existing grilles that ship with theunits and span the entire width of both units. The kitincludes a 1/4" (6) center trim strip (required for properinstallation of the dual wide grille), heater, dual kickplateand mounting hardware. Dual wide grilles are available forall built-in models and design applications. The overlaydual installation kit with grille will accept overlay and dualflush inset panels. For dual wide grille panel dimensions,refer to the panel specifications below for your designapplication. Grille panel dimensions listed are for astandard 84" (2134) finished height.
INSTALLATION WITH INDIVIDUAL GRILLES
This kit is available for those who choose to utilize theindividual grilles that ship with each unit. The kit includes a1/4" (6) filler strip (which fills the reveal between the unitsand grilles), heater and mounting hardware. This dualinstallation kit is not required if a custom filler strip is used.The filler strip should be a minimum of 2" (51) wide. Referto the full-scale template on page 41 for more information.
Dual Wide Grille—Overlay
TWO 30" (762) MODELS W H
Overlay Panel 601/4" (1530) 91/4" (235)
Spacer Panel 593/8" (1558) 85/16" (211)
Backer Panel 60" (1524) 815/16" (227)
30" (762) AND 36" (914) MODELS W H
Overlay Panel 661/4" (1683) 91/4" (235)
Spacer Panel 653/8" (1661) 85/16" (211)
Backer Panel 66" (1676) 815/16" (227)
TWO 36" (914) MODELS W H
Overlay Panel 721/4" (1835) 91/4" (235)
Spacer Panel 713/8" (1813) 85/16" (211)
Backer Panel 72" (1829) 815/16" (227)
Dual Wide Grille—Flush Inset
TWO 30" (762) MODELS W H
Flush Inset Panel 611/4" (1556) 91/4" (235)
Spacer Panel 593/8" (1558) 85/16" (211)
Backer Panel 60" (1524) 815/16" (227)
30" (762) AND 36" (914) MODELS W H
Flush Inset Panel 671/4" (1708) 91/4" (235)
Spacer Panel 653/8" (1661) 85/16" (211)
Backer Panel 66" (1676) 815/16" (227)
TWO 36" (914) MODELS W H
Flush Inset Panel 731/4" (1861) 91/4" (235)
Spacer Panel 713/8" (1813) 85/16" (211)
Backer Panel 72" (1829) 815/16" (227)
Built-In Refrigeration 37
subzero.com/specs
Standard Handle Lengths
ALL REFRIGERATOR / ALL FREEZER AND SIDE-BY-SIDE DOOR
Tubular Handle 637/8" (1622)
Pro Handle 451/8" (1146)
Stud Spacing 437/8" (1114)
BI-30U AND BI-30UG DOOR DRAWER
Tubular Handle 441/4" (1124) 245/16" (633)
Pro Handle 371/2" (952) 21" (533)
Stud Spacing 361/4" (921) 165/16" (414)
BI-36U AND BI-36UG DOOR DRAWER
Tubular Handle 441/4" (1124) 305/16" (770)
Pro Handle 371/2" (952) 231/2" (597)
Stud Spacing 361/4" (921) 225/16" (567)
Accessories
These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.
• Flush inset front panels in stainless steel with handleoptions.
• Framed front panels in stainless steel and whiteenamel.
• Side panels in stainless steel and white enamel.
• Grilles for an 83" (2108) or 88" (2235) finished height.
• Extended framed handles.
• Tubular and pro handles to match the style of Wolfovens and ranges.
• Dual installation kits with and without dual wide grille.
• Retrofit kits for use with 600 series panels.
• Partial framed kit for dispenser models.
STANDARD HANDLE LENGTHS
Refer to the chart below for standard lengths of tubular,and pro handles used on built-in models.
Built-In Refrigeration 38
Framed Panel Thickness
FULL-SCALE TEMPLATE
OPTIONAL EXTENDEDFULL-LENGTH HANDLE
STANDARDFULL-LENGTH HANDLE
1/4" (6) FRAMED PANEL
DOOR
1"(25)
3"(76)
11/4" (32) PANEL
1" (25) PANEL
1/2" (13) PANEL
3/4" (19) PANEL
2"(51)
PANEL THICKNESSFRAMED APPLICATION
Built-In Refrigeration 39
subzero.com/specs
1/4" (6) BACKER PANEL
DOOR
DEPTH OF TUBULAR, CURVEDAND PRO HANDLES
1"(25)
3"(76)
11/4" (32) PANEL
1" (25) PANEL
3/4" (19) PANEL
2"(51)
.10" (3) SPACER PANEL
Overlay Panel Thickness
FULL-SCALE TEMPLATE
Overlay and flush inset panels must be a minimum of 5/8"(16) thick to support mounting the handle. Panel thicknessdoes not include backer and spacer panel. Mount handleclose to the opening edge of the door.
PANEL THICKNESSOVERLAY AND FLUSH INSET APPLICATIONS
Built-In Refrigeration 40
237/8" (606)TO REAR OF UNIT
OVERALL WIDTH OF UNIT
11/4" (32)
11/2" (38)
13/4" (44)
0" (0)
1" (25)
2" (51)
21/4" (57)
21/2" (63)
23/4" (70)
3" (76)
31/4" (83)
31/2" (89)
1/4" (6)
1/2" (13)
3/4" (19)
3/4" (19) THICKOVERLAY PANEL
(TYPICAL)
1/4" (6) BACKERPANEL
1" (25) THICKPANEL
Overlay Application
FULL-SCALE TEMPLATE
DOOR OPENING 90°TOP VIEW
1" (25)0"
SCALE
Built-In Refrigeration 41
subzero.com/specs
11/4" (32)
ASSUMES3/4" (19)
FLUSH INSETPANEL
THICKNESS
23/16" (56)
24" (610)TO BACK WALL
3/4" (19) THICKFLUSH INSET PANEL
(TYPICAL)
1/4" (6) BACKERPANEL
1" (25) THICKPANEL
Flush Inset Application
FULL-SCALE TEMPLATE
For panels thicker than 3/4" (19),a 90˚ door stop may be requiredto prevent interference withadjacent cabinets.
DOOR OPENING 110°TOP VIEW
1" (25)0"
SCALE
Built-In Refrigeration 42
11/4" (32)
FILLER STRIP
APPROX PROFILE OFSTAINLESS STEEL WRAPPED
DOOR AND HANDLE
DOOROPEN 110°
DOORCLOSED
Dual Installation—Standard
FULL-SCALE TEMPLATE
Typical framed, overlay or stainless steeldual installation with filler strip atmaximum 110° door opening. Dependingon panel thickness, a 90˚ door stop maybe required.
STANDARDTOP VIEW
1" (25)0"
SCALE
Built-In Refrigeration 43
subzero.com/specs
11/2" (38)
1/2" (13)
FILLER STRIP
PROFILE OF 3/4" (19) FLUSH INSET PANELAND TUBULAR HANDLE
DOORCLOSED
DOOROPEN 110°Dual Installation—Flush Inset
FULL-SCALE TEMPLATE
Typical flush inset dual installation withfiller strip at maximum 110° dooropening. Depending on panel thickness,a 90˚ door stop may be required.
FLUSH INSETTOP VIEW
1" (25)0"
SCALE
MODEL 648PRO
PRO 48 Refrigeration 45
subzero.com/specs
PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monumentto food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like itsbold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in orfreestanding.
48"(1219)
84"(2134)
48"(1219)
84"(2134)
648PRO 648PROG
PRO 48 MODELS KEY FEATURES
• Can be used freestanding or installed as a standard orflush built-in application.
• Handles coordinate with handles of Wolf ranges.
• Stainless steel interior as well as exterior.
• Dual refrigeration system enhanced with triple evapora-tors allow independent control of storage conditions inrefrigerator cabinet and drawer compartments.
• Advanced water filtration system.
• Exterior temperature display.
• Flip-up grille provides easy access for quick routinemaintenance.
• Star-K certified.
PRO 48 Refrigeration 46
48" (1219)
84"(2134)
257/8" (657)
303/16" (767)
4" (102)
301/2"(775)
237/8"(606)
421/8"(1070)
141/2"(368)
303/4"(781)
21" (533)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODELS 648PRO AND 648PROG
PRO 48 Models
OVERALL DIMENSIONS
SPECIFICATIONS
Capacity / Weight
INTERIOR CAPACITY R CU FT (L) F CU FT (L)
648PRO and 648PROG 18.4 (521) 11.7 (331)
SHIPPING WEIGHT LBS (KG)
648PRO 860 (390)
648PROG 875 (397)
PRO 48 Refrigeration 47
subzero.com/specs
OPENINGDEPTH
FRONT VIEWSIDE VIEW
TOP VIEW
OPENINGWIDTH
OPENINGDEPTH
OPENINGHEIGHT
IMPORTANT NOTE: For standard built-in installations, theface frame of the unit will extend 2" (51) beyond cabinetry.In flush built-in installations, the front of the face frame will beflush with surrounding cabinetry.
Opening Dimensions Standard Flush
Opening Width 471/2" (1206) 48" (1219)
Opening Height 833/4" (2127) 841/8" (2137)
Opening Depth 24" (610) 26" (660)
PRO 48 Models
STANDARD AND FLUSH BUILT-IN INSTALLATIONS
Planning Information
PRO 48 models can be used freestanding or installed as astandard or flush built-in application. For standard built-ininstallations, the face frame of the unit will extend 2" (51)beyond cabinetry. In flush built-in installations, the front ofthe face frame will be flush with surrounding cabinetry.
ELECTRICAL REQUIREMENTS
For PRO 48 models, the electrical supply should belocated within the shaded area shown in the illustrationbelow. Follow the National Electrical Code and local codesand ordinances when installing the receptacle. A separatecircuit, servicing only this appliance, is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.
PRO 48 Refrigeration 48
Electrical Requirements
Power Supply 115 V AC, 60 Hz
Circuit Breaker 15 amp
Receptacle 3-prong grounding-type
PLUMBING REQUIREMENTS
PRO 48 models come with an automatic ice maker and anintegrated water filtration system. The water supply lineshould be located within the shaded area shown in theillustration below. The water supply line should be con-nected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not useself-piercing valves. A saddle valve kit (4200880) is avail-able through your authorized Sub-Zero dealer. The waterline must not interfere with installation of the anti-tipbrackets.
IMPORTANT NOTE: A reverse osmosis system can beused provided there is constant water pressure of 35 psi(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at alltimes. In this application, the integrated water filtrationsystem must be set to bypass mode. This is achieved byremoving the water filter cartridge. Refer to the PRO 48installation guide packed with the unit for detailedinstructions.
Plumbing Requirements
Water Supply Line 1/4" OD copper line
Water Pressure 35–120 psi (2.4–8.3 bar)
Excess Water Line for Connection 36" (914)
3" (76)
FRONT VIEW
FLOOR
53/16"(132)
6"(152)
Location of water supply.
FRONT VIEW
751/2"(1918)FROMFLOOR
7"(178) E
6"(152)
Location of electrical supply.
PRO 48 Refrigeration 49
subzero.com/specs
Accessories
These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.
• Freestanding kit, which contains two stainless steelside panels and top lid.
• Stainless steel side panel.
• Refrigerator drawer dividers for compartmentalizedstorage.
• Stainless steel slide-out refrigerator bin.
• Dozen egg container.
• 90° door stop.
MODELS IC-27F, 427G (WINE) AND IC-27R
Integrated Refrigeration 51
subzero.com/specs
Integrated Refrigeration. With custom cabinet fronts and hardware, Sub-Zero invented integrated columns, drawersand tall units that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration aspractical and beautiful in the master suite, bar or theatre room as in the kitchen.
36"(914)
80"(2032)
36"(914)
80"(2032)
36"(914)
80"(2032)
736TR 736TFI 736TCI
27"(686)
80"(2032)
27"(686)
80"(2032)
27"(686)
80"(2032)
700TR 700TFI 700TCI
341/2"(876)
27"(686)
341/2"(876)
27"(686)
341/2"(876)
27"(686)
700BR 700BF(I) 700BC(I)
KEY FEATURES
• Custom cabinet fronts and hardware allow for infinitedesign options.
• Point-of-use refrigeration that can be placed anywhere
in the home.
• Dual refrigeration; two compressors preserve food’sgoodness in self-contained compartments.
• Energy efficient; many models are ENERGY STAR®
qualified.
• Drawer models are Star-K certified.
INTEGRATED MODELS
27"(686)
81"(2057)
27"(686)
81"(2057)
IC-27RAVAILABLE2ND QUARTER 2010
IC-27FIAVAILABLE2ND QUARTER 2010
Integrated Refrigeration 52
MODELS IC-27R AND IC-27FI
27" (686)
14"(356)
15/8"(41)
24"(610)
81"(2057)
TO TOP OFOPENNG
24" (610)
789/16"(1995)
93/4" (248)
4"(102)1/2" (13) ± ADJUSTMENT IN LEVELING LEGS
251/2"(648)
45/8"(117)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
Overall Dimensions
COLUMN MODELS
MODELS 700TR, 700TFI AND 700TCI
27" (686)
14"(356)
13/16"(21)
341/2"(876)
24"(610)
203/8"(518)
101/4"(260)
131/4"(337)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
1/2"(13)
3/8"(10)
191/2"(495)
251/2"(648)
45/8"(117)
80"(2032)
TO TOP OFOPENNG
24" (610)
789/16"(1995)
93/4"(248)
4"(102)HEIGHT DIMENSIONS ±1/2" (13)
27" (686) TALL MODELS
Overall dimensions do not include panels or handles.
Integrated Refrigeration 53
subzero.com/specs
MODELS 736TR, 736TFI AND 736TCI
36" (914)
14"(356)
80"(2032)
TO TOP OFOPENNG
24" (610)
15/16"(33)
7713/16"(1976)
341/2"(876)
24"(610)
203/8"(518)
101/4"(260)
131/4"(337)
93/4"(248)
4"(102)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
1/2"(13)
3/8"(10)
191/2"(495)
341/2"(876)
7" (178)
HEIGHT DIMENSIONS ±1/2" (13)
Overall Dimensions
36" (914) TALL MODELS
Integrated Refrigeration 54
Interior Capacity R cu ft (L) F cu ft (L)
COLUMN MODELS
IC-27R 16.2 (459)
IC-27FI 16.3 (462)
27" (686) TALL MODELS
700TR 15.5 (439)
700TFI 15.3 (433)
700TCI 10.2 (289) 5.1 (144)
36" (914) TALL MODELS
736TR 20.9 (592)
736TFI 21.5 (609)
736TCI 13.3 (377) 7.1 (201)
27" (686) DRAWER MODELS
700BR 5.3 (150)
700BF(I) 5.1 (144)
700BC(I) 2.9 (82) 2.1 (59)
Capacity and Weight
Shipping Weight lbs (kg)
IC-27R, IC-27FI, 700TR, 700TFI and 700TCI 360 (163)
736TR, 736TFI and 736TCI 480 (218)
700BR, 700BF(I) and 700BC(I) 190 (86)
MODELS 700BR, 700BF(I) AND 700BC(I)
27" (686)
341/2"(876)
24"(610)
203/8"(518)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
1/2"(13)
3/8"(10)
191/2"(495)
257/8" (657)
24" (610)
93/4" (248)
4"(102)
101/4"(260)
131/4"(337)
HEIGHT DIMENSIONS ±1/2" (13)
Overall Dimensions
DRAWER MODELS
Integrated Refrigeration 55
subzero.com/specs
IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. Your designmay necessitate moving the unit back or cabinets forward toachieve a flush fit. This will require a minimum rough openingdepth of 25" (635).25" (635)
OPENINGDEPTH
AOPENING WIDTH
25" (635)OPENING DEPTH
BOPENINGHEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
Opening Dimensions
INTEGRATED MODELS
Opening Dimensions A B
IC-27R and IC-27FI 27" (686) 81" (2057)
700TR, 700TFI, 700TCI 27" (686) 80" (2032)
736TR, 736TFI, 736TCI 36" (914) 80" (2032)
700BR, 700BF(I), 700BC(I) 27" (686) 341/2" (876)
Integrated Refrigeration 56
Electrical Requirements
The electrical supply should be located within the shadedarea shown in the illustrations. Follow the NationalElectrical Code and local codes and ordinances wheninstalling the receptacle. A separate circuit, servicing onlythis appliance, is required. A ground fault circuit inter-rupter (GFCI) is not recommended and may cause inter-ruption of operation.
IMPORTANT NOTE: It is critical that the electrical outlet belocated within the shaded area shown so it does not inter-fere with installation of the anti-tip bracket. It must beflush with the back wall and positioned with the groundingprong to the right of the thinner blades.
Electrical Requirements
Power Supply 115 V AC, 60 Hz
Circuit Breaker 15 amp
Receptacle 3-prong grounding-type
13" (330)
1/4" (6)
41/2"(114)
POSITION OUTLET WITHGROUNDING PRONG
TO THE RIGHT
FLOOR
21/2" (64)
FRONT VIEW
27" (686) models. 36" (914) models.
171/2" (445)
41/2"(114)
POSITION OUTLET WITHGROUNDING PRONG
TO THE RIGHT
FRONT VIEW
FLOOR
21/2" (64)
1/4" (6)
Integrated Refrigeration 57
subzero.com/specs
Plumbing Requirements
For integrated models with an automatic ice maker, thewater supply line should be located through the floor orback wall, within the shaded area shown in the illustra-tions. The water supply line should be connected to thehouse supply with an easily accessible shut-off valvebetween the supply and the unit. Do not use self-piercingvalves. A saddle valve kit (4200880) is available throughyour authorized Sub-Zero dealer.
IMPORTANT NOTE: It is critical that the water line belocated within the shaded area shown so it does not inter-fere with installation of the anti-tip bracket.
An in-line filter is required when water conditions have ahigh sediment content. The ice maker operates onconstant water pressure between 20 psi (1.4 bar) and100 psi (6.9 bar).
IMPORTANT NOTE: In some cases, a reverse osmosiswater filter system may not be able to maintain theminimum pressure consistently.
Plumbing Requirements
Water Supply Line 1/4" OD copper line
Water Pressure 20–100 psi (1.4–6.9 bar)
Excess Water Line for Connection 27" (686)
3" (76)
9"(229)
3/4"(19)
FLOOR
21/2" (64)
FRONT VIEW
27" (686) models.
9"(229)
6"(152)
TOP VIEW
11/2"(38)
21/2"(64)
BACKWALL
131/2"(343)
3" (76)
FRONT VIEW
3/4"(19)
FLOOR
21/2" (64)
36" (914) models.
131/2"(343)
TOP VIEW
6"(152) 11/2"
(38)
21/2"(64)
BACKWALL
Integrated Refrigeration 58
A
A
A
453/8"(1153)
263/4" (679)PANEL WIDTH
139/16"(345)
1611/16"(424)
4" (102)
797/8"(2029)
341/2"(876)
A
A
A
453/8"(1153)
353/4" (908)PANEL WIDTH
139/16"(345)
1611/16"(424)
27" (686)FINISHED OPENING
4" (102)
36" (914)FINISHED OPENING
797/8"(2029)
ALL REVEALS (A) ARE 1/8" (3).
A
767/8"(1953)
263/4" (679)PANEL WIDTH
4" (102)
807/8"(2054)
27" (686)FINISHED OPENING
Panel dimensions are based on a 1/8" (3) reveal. A reveal of upto 1/4" (6) is possible with adjustments to panel dimensions.
27" (686) MODELSTALL AND DRAWER MODELS
36" (914) MODELSTALL MODELS
Typical Panel Dimensions
COLUMN MODELS W H
Door 263/4" (679) 767/8" (1953)
27" (686) MODELS W H
Door 263/4" (679) 453/8" (1153)
Top Drawer 263/4" (679) 139/16" (345)
Bottom Drawer 263/4" (679) 1611/16" (424)
36" (914) MODELS W H
Door 353/4" (908) 453/8" (1153)
Top Drawer 353/4" (908) 139/16" (345)
Bottom Drawer 353/4" (908) 1611/16" (424)
Cabinetry Applications
FRAMELESS CABINETRY
COLUMN MODELS
Integrated Refrigeration 59
subzero.com/specs
Cabinetry Applications
DOOR PANEL HEIGHT
The height of the door panel can extend beyond thetypical panel height, provided you do not exceed the panelweight limit. The illustration below shows how the panelmay be extended and what you need to consider to finishthe area behind the door panel.
IMPORTANT NOTE: The decorative valance used to finishthe area behind the door panel must stay behind the frontplane of the finished molding.
INTEGRATED UNIT(SIDE VIEW)
11/2"(38)
25" (635) TO WALL
HINGE
DECORATIVE VALANCECANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
DECORATIVE VALANCE
REMOVABLE MOLDING
TYPICALHEIGHT
OF DOORPANEL
MINIMUMHEIGHT
OVERALLHEIGHT
1/8"(3)
1/8"(3)
DOORPANEL
25" (635) TO WALL
HEIGHTOF PANEL
INTEGRATED UNIT(SIDE VIEW)
25/8" (67) TO 4" (102)
BASE MOLDINGMUST BE
REMOVABLE
KICKPLATE/GRILLECAN BE ADJUSTED
FORWARD
KICKPLATE/GRILLE
4" (102) TO 9" (229)FROM FLOOR
TOE KICK CLEARANCE
The toe kick clearance can vary with the height of thepanel. You must keep a minimum space of 4" (102) clearbelow the bottom edge of the panel for proper venting. Inaddition, any decorative base molding must be removableto clean the condenser and for service.
UPPER VALANCECOLUMN AND TALL MODELS
KICKPLATE/GRILLE AREAALL INTEGRATED MODELS
Integrated Refrigeration 60
Cabinetry Applications
Integrated refrigeration is compatible with virtually anystyle and look of cabinetry. These models can be usedwith framed as well as frameless cabinetry. Because of theprecise application and the look you may want to achieve,keep the following considerations in mind:
The thickness of the front panels can vary. A minimum 5/8"(16) thick panel is required, but the thickness can beincreased provided the panel weight limit is not exceeded.
IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. You mustallow for the thickness of the panel you are applying whenplanning for the finished rough opening depth if you wantthe front panel to be flush with surrounding cabinetry. Youmay have to move the unit back into drywall or bring thecabinets forward to achieve a flush fit.
Reveals between panels can vary. A reveal of 1/8" (3) istypical, but reveals can be increased to up to 1/4" (6).
When 3/4" (19) or thicker panels are used with a revealof less than 1/4" (6), door panels may cause damage tothe unit when the door is opened to the maximum 105°.Use the built-in 90° door stop.
As reveals between cabinetry and the unit decrease,the potential exists for severe finger pinching while thedoor is closing.
IMPORTANT NOTE: The inside edges of the rough openingas well as the sides and a portion of the backside of thedecorative panels will need to be finished, as they will beexposed when the doors are open.
D-style handles are recommended. For the cabinet door,handles must be located near the edge of the panelopposite the hinge, centered top to bottom. Locatehandles in the top center area of the drawer panels.
Illustrations on the following pages show typical applica-tions of frameless and framed cabinetry. Also refer to thefull-scale illustration at the end of this section for specificson door openings.
Panel Requirements
COLUMN MODELS MAX WEIGHT
Door Panel 65 lbs (29 kg)
TALL AND DRAWER MODELS MAX WEIGHT
27" (686) Door Panel 40 lbs (18 kg)
27" (686) Drawer Panel 12 lbs (5 kg)
36" (914) Door Panel 53 lbs (24 kg)
36" (914) Drawer Panel 16 lbs (7 kg)
PANEL THICKNESS MINIMUM
All Panels 5/8" (16)
Integrated Refrigeration 61
subzero.com/specs
Dual Installations
Two integrated units may be placed side by side in a dualinstallation. Panel width dimensions will vary slightly fromsingle installations. Refer to the chart below for typicalpanel dimensions.
A dual installation kit is required for installations with 2"(51) or less space between the units. Dual installation kitsare available through your authorized Sub-Zero dealer.
IMPORTANT NOTE: If a 27" (686) unit is installed next to a36" (914) tall unit, the decorative front panels will align,however, the face frames will not. This is only apparentwhen both doors are open at the same time. Due to amore robust hinge on 36" (914) units, the face frame wasreconfigured to maintain a consistent overall panel height.
Panel dimensions are based on a 1/8" (3) reveal. A reveal of upto 1/4" (6) is possible with adjustments to panel dimensions.
Typical Panel Dimensions
COLUMN MODELS W H
Door 2613/16" (681) 767/8" (1953)
27" (686) MODELS W H
Door 2613/16" (681) 453/8" (1153)
Top Drawer 2613/16" (681) 139/16" (345)
Bottom Drawer 2613/16" (681) 1611/16" (424)
36" (914) MODELS W H
Door 3513/16" (910) 453/8" (1153)
Top Drawer 3513/16" (910) 139/16" (345)
Bottom Drawer 3513/16" (910) 1611/16" (424)
25" (635)OPENING
DEPTH
TOP VIEW
54" (1372) OR 72" (1829)OPENING WIDTH
Dual installation opening.
Cabinetry Applications
The illustrations below show typical applications of framedand frameless cabinetry. Refer to the full-scale templatesat the end of this section for specifics on door openings.
DOOR
1/8" (3)REVEAL FINISHED
OPENING
INTEGRATEDUNIT
CABINET
PANEL
Framed—full overlay. Framed—standard overlay.
1/8" (3)REVEAL FINISHED
OPENING
INTEGRATEDUNIT
DOOR
CABINET
PANEL
DOOR
CABINET
FINISHEDOPENING
UNIT
PANEL
1/8" (3)REVEAL
Framed—beaded inset. Frameless cabinetry.
FINISHEDOPENING
DOOR
INTEGRATEDUNIT
CABINET
PANEL
1/8" (3)REVEAL
Integrated Refrigeration 62
Standard Handle Lengths
COLUMNS DOOR
Tubular Handle 417/16" (1053)
Pro Handle 391/2" (1003)
Stud Spacing 383/8" (975)
27" (686) MODELS DOOR DRAWER
Tubular Handle 417/16" (1053) 23" (584)
Pro Handle 391/2" (1003) 21" (533)
Stud Spacing 383/8" (975) 193/4" (502)
36" (914) MODELS DOOR DRAWER
Tubular Handle 417/16" (1053) 32" (762)
Pro Handle 391/2" (1003) 30" (533)
Stud Spacing 383/8" (975) 283/4" (730)
Accessories
These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.
• Stainless steel front panels with handles.
• Tubular and pro handles to match the style of Wolfovens and ranges.
• Crisper drawer with shelf assembly, deli drawer withshelf and crisper cover with lid for certain models.
• Dual installation kit.
• Harness kit for Star-K compliance.
STANDARD HANDLE LENGTHS
Refer to the chart below for standard lengths of tubularand pro handles used on integrated models.
Integrated Refrigeration 63
subzero.com/specs
1/8" (3) MINIMUM REVEAL
LINE OF INTERFERENCE
SIDE MOLDING ANDINSTALLATION HARDWARE
INTEGRATED DOOR CLOSED
MOUNTING BRACKET
FRAMED PANEL
LINE OF INTERFERENCEMAXIMUM 105° OPENING
3/4" (19)
INTEGRATEDDOOR
MAXIMUM 105° OPENING
LINE OFINTERFERENCE
Maximum Door Opening
FULL-SCALE TEMPLATE
If the panel is thicker than 3/4" (19), use the built-in 90˚door stop to prevent damage to the panel and face frameat the maximum door opening.
105° OPENINGTOP VIEW—1/4 SCALE
DOOR CLOSEDTOP VIEW—FULL-SCALE
1" (25)0"
SCALE
MODEL WS-30
Wine Storage 65
subzero.com/specs
Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed toensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helpsmake a wine collection an element of beauty in the home.
27"(686)
80"(2032)
30"(762)
84"(2134)
27"(686)
80"(2032)
427G 427RG WS-30
341/16"(865)
151/8"(384)
241/4"(616)
343/16"(868)
34"(864)
237/8"(606)
315W 424G 424FS
KEY FEATURES
• Integrated, overlay, flush inset and stainless steeldesign options.
• Full-view glass door standard on all models.
• Freestanding model 424FS does not require panels orsurrounding cabinetry.
• Discreet interior lighting with illuminated display shelf.
WINE STORAGE MODELS
• Two independent storage zones maintain temperature,humidity and UV protection.
• Cherrywood shelf fronts display the wine beautifully.
• Rust-proof metal shelves accommodate 750 mlbottles, half-bottles and magnums.
Wine Storage 66
Overall Dimensions
UNDERCOUNTER WINE STORAGE
237/8" (606) 24" (610)
34"(864)
253/8"(645)
4" (102)
23/8" (60)
MODELS 424GMODEL 315W
151/8" (384) 24" (610)
341/16"(865)
165/8"(422)
4" (102)
23/8" (60)
Overall dimensions are based on stainless steel panelsand handles.
Wine Storage 67
subzero.com/specs
Overall Dimensions
FULL-SIZE WINE STORAGE
MODELS 427G MODELS 427RGWITH REFRIGERATOR DRAWERS
27" (686)
14"(356)
13/16"(21)
80"(2032)
OPENINGHEIGHT
24" (610)
789/16"(1995)
815/16"(227)
4"(102)HEIGHT DIMENSIONS ±1/2" (13)
24"(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
251/2"(648)
45/8"(117)
27" (686)
14"(356)
13/16"(21)
341/2"(876)
203/8"(518)
101/4"(260)
131/4"(337)
1/2"(13)
3/8"(10)
80"(2032)
OPENINGHEIGHT
24" (610)
789/16"(1995)
93/4"(248)
4"(102)HEIGHT DIMENSIONS ±1/2" (13)
24"(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
191/2"(495)
251/2"(648)
45/8"(117)
Overall dimensions do not include panels or handles.
Wine Storage 68
Storage Capacity Bottles (750 ml) R cu ft (L)
315W 26
424G 46
427G 132
427RG 78 5.3 (150)
WS-30 147
Shipping Weight lbs (kg)
315W 118 (54)
424G 195 (88)
424FS 220 (100)
427G 395 (179)
427RG 410 (186)
WS-30 445 (202)
Capacity and Weight
30" (762)
84"(2134)
24" (610)
4" (102)
733/4"(1873)
237/8"(606)
311/4"(796)
17"(432)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
MODEL WS-30
Overall dimensions are based on the stainless steel model.For flush inset applications, add 1/2" (13) to door clearancedimensions.
Overall Dimensions
FULL-SIZE WINE STORAGE
Wine Storage 69
subzero.com/specs
Opening Dimensions
UNDERCOUNTER WINE STORAGE
Opening Width A
315W 151/4" (387)
424G 24" (610)
24" (610)OPENING
DEPTH
AOPENING WIDTH
24" (610)OPENING DEPTH
341/2" (876)OPENINGHEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
IMPORTANT NOTE: The depth of each integrated model is24" (610) from the front of the unit to its back. Your designmay necessitate moving the unit back or cabinets forward toachieve a flush fit. This will require a minimum rough openingdepth of 25" (635).
25" (635)OPENING
DEPTH
27" (686)OPENING WIDTH
25" (635)OPENING DEPTH
80" (2032)OPENINGHEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
MODELS 427G AND 427RG
MODELS 315W AND 424G
FULL-SIZE WINE STORAGE
Wine Storage 70
UNIT WITH3/4" (19) PANEL
24" (610)OPENING
DEPTH
FRONT VIEWSIDE VIEW
TOP VIEW
291/2" (746)OPENING WIDTH
24" (610)OPENING DEPTH
833/4"(2127)
OPENINGHEIGHT
MODEL WS-30
Opening Dimensions
FULL-SIZE WINE STORAGE
Planning Information
All wine storage models must be installed so that the doorcan open a minimum of 90˚ or you will have problemspulling the wine shelves out. For corner installations, youneed to allow for a minimum 3" (76) filler so the door canopen to 90˚. If you are using larger-handle hardware, youwill also need to take that into account. Refer to doorclearance specifications.
For a maximum 90˚ door opening, use the door stop builtinto the hinge system of model 427G. A 90˚ door stop isshipped with model WS-30.
If you will be connecting the unit to a home securitysystem, you must allow a minimum of 36" (914) of thesystem’s wiring to be routed in the electrical area desig-nated for your model.
Wine Storage 71
subzero.com/specs
Planning Information
DUAL INSTALLATIONS
If you are installing a wine storage unit next to an existingSub-Zero unit, you may have to allow for a filler strip.
If you are installing a model 427G or 427RG next to anexisting integrated unit, with 2" (51) or less between theunits, an optional heater kit will need to be installed toprevent moisture from forming between the units. Theseoptional heater kits are available through your authorizedSub-Zero dealer. For local dealer information, visit theshowroom locator section of our website, subzero.com.
ELECTRICAL REQUIREMENTS
The electrical supply should be located within the shadedarea shown in the illustration for your specific model.Follow the National Electrical Code and local codes andordinances when installing the receptacle. A separatecircuit, servicing only this appliance, is required. A groundfault circuit interrupter (GFCI) is not recommended andmay cause interruption of operation.
Electrical Requirements
Power Supply 115 V AC, 60 Hz
Circuit Breaker 15 amp
Receptacle 3-prong grounding-type
FRONT VIEW
151/2"(394)
3" (76)
2" (51)
Models 315W and 424G. Models 427G and 427RG.
13" (330)
1/4" (6)
41/2"(114)
POSITION OUTLET WITHGROUNDING PRONG
TO THE RIGHT
FLOOR
21/2" (64)
FRONT VIEW
FRONT VIEW
751/2"(1918)FROMFLOOR
7"(178) E
6"(152)
Model WS-30.
Overlay Panels
MODELS 315W AND 424G
The overlay panel applied to models 315W and 424Gshould not be confused with the built-in overlay panelapplication. The overlay panel will consist of just a frameand would be either the 5/8" (16) or 3/4" (19) thick panelyou may be using. It is affixed directly to the door itselfwith screws through a series of predrilled holes in the doorframe. A backer and spacer panel is not required.
Model 315W and 424G can be installed flush with sur-rounding cabinetry. Depending on the thickness of theoverlay door panel, it may be necessary to install the unitso that it extends 1/4" (6) beyond the front surface of sur-rounding cabinetry. This will prevent interference betweenthe door panel and adjoining cabinetry at the maximum145° door swing. Refer to the full-scale template at theend of this section.
Wine Storage 72
Door Panels
Unless you are installing a stainless steel model, you willneed to provide a frame for the glass door. If you order astainless steel unit, models 315W, 424G, 424FS andWS-30 will be shipped with their panels and hardwareinstalled. For models 427G and 427RG, optional stainlesssteel panels or custom panels will need to be installed.
The glass door is designed to be exposed to room air cir-culation. Decorative overlays on the glass should be keptto a minimum. Also, rails and stiles can be increased insize but should not exceed the cabinet manufacturers’standard width and cannot exceed the overall door paneldimensions listed in the charts.
The back sides of rails and stiles that will be visiblethrough the glass door will need to be finished. Also, theinside edges of the frames must be finished to match thefront surface.
FREESTANDING MODEL 424FS
Model 424FS does not require any panels or surroundingcabinetry. It has a beautiful stainless steel exterior that isdesigned to be used in a freestanding application.
Overlay Panels
PANEL DIMENSIONS W H
315W 15" (381) 301/16" (764)
424G 233/4" (603) 301/16" (764)
MIN WIDTH
Stiles and Rails 21/4" (57)
MAX PANEL WEIGHT
Door Frame (315W) 10 lbs (5 kg)
Door Frame (424G) 10 lbs (5 kg)
MIN PANEL THICKNESS
All Panels 5/8" (16)
Wine Storage 73
subzero.com/specs
The height of the door panel for models 427G and 427RGcan extend beyond the typical panel height, provided youdo not exceed the panel weight limit. Refer to specifica-tions on page 59 of the integrated section.
The toe kick area on model 427G cannot be larger than 6"(152), and on model 427RG, no larger than 9" (229). Thetoe kick area for either model cannot be less than 4" (102).
If you are installing an optional lock kit on models 427G or427RG, you may have to order door panels that exceedthe 80" (2032) finished height. Consult the lock kit installa-tion instructions and see if your panels will allow for anadequate installation. These instructions are available onour website, subzero.com.
Panel Requirements
MIN WIDTH
Stiles 21/4" (57)
Top Rail 33/4" (95)
Bottom Rail (427G) 8" (203)
Bottom Rail (427RG) 3" (76)
MAX PANEL WEIGHT
Door Frame 20 lbs (9 kg)
Drawer Panel (427RG) 12 lbs (5 kg)
MIN PANEL THICKNESS
All Panels 5/8" (16)
Integrated Panels
427G W H
Door 263/4" (679) 757/8" (1927)
427RG W H
Door 263/4" (679) 453/8" (1153)
Top Drawer 263/4" (679) 139/16" (345)
Bottom Drawer 263/4" (679) 1611/16" (424)
Integrated Panels
MODELS 427G AND 427RG
The integrated full panels or frame panels for glass doorsfor these models will follow some of the identical planningprocesses used with the integrated line. The installation ofthe door panels is completely different, however. Ratherthan using the mounting hardware we used with the inte-grated line, door panels for both models 427G and 427RGwill be applied with screws applied through our door.
The drawer panels for the model 427RG will be appliedusing the integrated technique of mounting brackets.
IMPORTANT NOTE: The depth of models 427G and427RG is 24" (610) from the front of the unit to its back.You must allow for the thickness of the panel you areapplying when planning for the finished rough openingdepth if you want the front panel to be flush with sur-rounding cabinetry. You may have to move the unit backinto the drywall or bring the cabinets forward. Refer to theintegrated section.
Panel dimensions listed in the chart assume the modelsfinish off at 80" (2032) in height overall and have a 4" (102)toe kick for the model 427G. If you finish off at 84" (2134),for instance, you must add an additional 4" (102) to thefinished height of the panel and 4" (102) to the top rail.Likewise, if you allow for a 6" (152) toe kick for the model427G, you must subtract 2" (51) from the bottom rail.
Wine Storage 74
Model WS-30
FRAMED PANEL
If the thickness of the framed panel is less than 1/4" (6), itmust be backed up with a sheet of shim material to buildthe total thickness to 1/4" (6). If the panel is thicker than1/4" (6), a routed edge must be provided around the panelto ensure a proper fit. Refer to the illustration below.
Routing, recessing or an extended handle may be requiredon raised panels for finger clearance under the handle.
IMPORTANT NOTE: Do not cover the glass door with asolid panel. The window cut-out edges of the framedpanel will need to be finished, as they will be exposed.
TRIMREVEAL
1/4" (6) min
MAIN FRAME
ROUT TO1/4" (6)
DOORFRAME
GLASS
Raised framed panel.
WS-30 Framed
DOOR W H
Door Panel 293/4" (756) 699/16" (1767)
WINDOW W H
Cut-Out 231/2" (597) 635/16" (1608)
A
Location 31/8" (79)
W
H
AA
A
A
FRAMED PANEL SPECIFICATIONS
Framed Panel Requirements
MODEL WS-30
Max Panel Weight 75 lbs (34 kg)
Min Panel Thickness 1/4" (6)
Model WS-30
OVERLAY PANEL
Overlay model WS-30 can be used in an overlay or flushinset application. The specific application will affect panelsizes, opening dimensions and the installation.
Overlay model WS-30 will be shipped without handlehardware and with an overlay panel grille as standardequipment. Along with the door panel, you will need toprovide a panel for the grille and hardware to complementyour surrounding cabinetry.
The overlay design allows the decorative panel to coverthe door trim for a more seamless appearance. The mostcommon way to achieve this look is to work with threepanels—the decorative overlay panel, which is typically3/4" (19), a .10" (3) spacer panel and a 1/4" (6) backerpanel. Depending on your cabinet manufacturer, this couldbe one panel routed for different dimensions. The illustra-tions below will give you a better idea of the panel con-struction and how it interacts with our frame. The size ofthe overlay panel is critical, it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with asolid panel. The window cut-out edges of the overlay,spacer and backer panels will need to be finished, as theywill be exposed.
OVERLAY PANEL SPECIFICATIONS
Wine Storage 75
subzero.com/specs
Do not exceed overlay panel dimensions, as this couldcause damage to panels and the Sub-Zero unit.
1/8"(3)
OVERLAY PANEL
SPACER PANEL
BACKER PANEL
TRIM
5/16" (8) min
DOOR FRAME GLASS
Panel assembly cross section. Panel assembly rear view.
1/4" (6).10" (3)
OVERLAYPANEL
SPACERPANEL
BACKERPANEL
3/4"(19)
typical
Grille panel dimensions listed are for a standard 84" (2134)overall height of the unit. For an 83" (2108) overall height,subtract 1" (25) from grille panel height dimensions. For an88" (2235) overall height, add 4" (102) to height dimensions.Width dimensions do not vary.
WS-30 Overlay
DOOR W H
Overlay Panel 30" (762) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
GRILLE W H
Overlay Panel 30" (762) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
WINDOW W H
Cut-Out 231/2" (597) 631/4" (1607)
A
Location 31/4" (83)
H
W
H
AA
A
A
Overlay Panel Requirements
MODEL WS-30
Max Panel Weight 75 lbs (34 kg)
Min Panel Thickness 5/8" (16)
Model WS-30
FLUSH INSET PANEL
Overlay model WS-30 used in a flush inset applicationallows the decorative panel to cover the door trim for aseamless appearance. The most common way to achievethis look is to work with three panels—the decorative flushinset panel, which is typically 3/4" (19), a .10" (3) spacerpanel and a 1/4" (6) backer panel. Depending on yourcabinet manufacturer, this could be one panel routed fordifferent dimensions. The illustrations below will give you abetter idea of the panel construction and how it interactswith our frame. The size of the flush inset panel is critical,it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with asolid panel. The inside edges of the rough opening as wellas the sides and a portion of the back side of the decora-tive panels will need to be finished, as they will beexposed when the doors are open. The window cut-outedges of the overlay, spacer and backer panels will alsoneed to be finished.
IMPORTANT NOTE: For flush inset panels thicker than3/4" (19), a 90˚ door stop may be required to prevent inter-ference with adjacent cabinets.
Sub-Zero Design Guide 76
9/16"(14)
FLUSH INSET PANEL
SPACER PANEL
BACKER PANEL
TRIM
5/16" (8) min
Panel assembly crosssection.
Panel assembly rear view.
1/4" (6).10" (3)
FLUSH INSETPANEL
SPACERPANEL
BACKERPANEL
3/4"(19)
typical
Grille panel dimensions listed are for a standard 84" (2134)overall height of the unit. For an 83" (2108) overall height,subtract 1" (25) from grille panel height dimensions. For an88" (2235) overall height, add 4" (102) to height dimensions.Width dimensions do not vary.
WS-30 Flush Inset
DOOR W H
Flush Inset Panel 31" (787) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
GRILLE W H
Flush Inset Panel 31" (787) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
WINDOW W H
Cut-Out 231/2" (597) 621/4" (1581)
A
Location 33/4" (95)
H
W
H
AA
A
A
Do not exceed flush inset panel dimensions, as thiscould cause damage to panels and the Sub-Zero unit.
FLUSH INSET PANEL SPECIFICATIONS
Flush Inset Panel Requirements
MODEL WS-30
Max Panel Weight 75 lbs (34 kg)
Min Panel Thickness 5/8" (16)
Sub-Zero Design Guide 77
subzero.com/specs
5/8"(16)
5/16" (8) 1/2"(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A Illus. B
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
SIDE VIEW
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
SIDE VIEW
Illus. C Illus. D
5/16"(8)
3/32"(2)
DOOR /DRAWER
SIDE VIEW
Panel Offsets Illus.
MODEL WS-30
Door / Grille Sides AGrille Top BGrille Bottom / Door Top CDoor Bottom D
Model WS-30
FLUSH INSET PANEL
Illustrations A–D provide panel offsets and reveals formodel WS-30 in a flush inset application. Refer to thechart below for reference to the illustrations.
For additional information on panel reveals, visit the speci-fication library section of our website, subzerotrade.com.
DUAL INSTALLATIONS
When two models WS-30 or a model WS-30 and built-inunit are installed side by side, a dual installation kit may berequired. Contact your Sub-Zero dealer for the propercomponents and installation instructions. For questionsrelative to the installation, call Sub-Zero at 800-222-7820.To obtain local dealer information, visit the showroomlocator section of our website, subzero.com.
DUAL STANDARD INSTALLATIONS
Two framed, overlay or stainless steel units may be placedside by side in a dual installation. Some dual standardinstallations will require a dual installation kit, availablethrough your Sub-Zero dealer.
A custom filler strip can be used in between two units in aframed, overlay or stainless steel design application. It isrecommended that the filler strip be at least 2" (51) wide,to prevent condensation between the units. Be sure to addthe filler strip width to your rough opening width.
Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illus-trations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustra-tion A, a dual installation accessory kit is required.
Illus. A
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. B Illus. C
Sub-Zero Design Guide 78
Model WS-30
DUAL FLUSH INSET INSTALLATIONS
Installing two models WS-30 or a model WS-30 andbuilt-in unit side by side in a flush inset application willrequire adjustments to the dimensions of your finishedrough opening, panel sizes and panel offsets. It will alsorequire a dual installation kit, available through yourSub-Zero dealer.
Dual installations without a filler strip can only be accom-plished using two units with opposite hinges as shown inillustration A below. The dual installations shown in illustra-tions B and C require a filler strip. Illustration A is the onlyapplication that will accommodate the dual wide grille.
IMPORTANT NOTE: The application shown in illustration Acan only be achieved by installing dual flush inset panels.Failure to install dual flush inset panels will cause thehandle side of the panels to collide when closing. In thisapplication a dual installation accessory kit is alsorequired.
Dual flush inset panels and dual installation kits are avail-able through your Sub-Zero dealer. Refer to the illustrationand chart for dual flush inset panel specifications.
Grille panel dimensions listed are for a standard 84" (2134)overall height of the unit. For an 83" (2108) overall height,subtract 1" (25) from grille panel height dimensions. For an88" (2235) overall height, add 4" (102) to height dimensions.Width dimensions do not vary.
WS-30 Dual Flush Inset
DOOR W H
Flush Inset Panel 301/2" (775) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
GRILLE W H
Flush Inset Panel 301/2" (775) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
WINDOW W H
Cut-Out 23" (584) 621/4" (1581)
A
Location 33/4" (95)
H
W
H
AA
A
A
Illus. A
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. B Illus. C
DUAL FLUSH INSET PANEL SPECIFICATIONS
Sub-Zero Design Guide 79
subzero.com/specs
Model WS-30
DUAL FLUSH INSET PANELS
When installing two models WS-30 or a model WS-30and built-in unit side by side in a flush inset application,you must decrease the width of the decorative flush insetpanels by 1/2". Adjustments to the panel offsets will alsoneed to be made. These adjustments are needed toachieve a proper fit and to ensure the panels do notcollide when closing. Panel dimensions in the chart belowhave been adjusted to reflect the decrease in paneldimensions.
IMPORTANT NOTE: If a filler strip is not used, dual installa-tions can only be accomplished using two units withopposite hinges.
Illustrations A–E provide panel offsets and reveals formodel WS-30 in a flush inset application. Refer to thechart below for reference to the illustrations. All reveals are1/2" (13) unless otherwise specified.
For additional information on panel reveals, visit the speci-fication library section of our website, subzerotrade.com.
5/8"(16)
5/16" (8) 1/2"(13)
FLUSH INSET PANEL
SPACER
BACKER
DOOR / DRAWER / GRILLE
TOP VIEW
CABINETRY
Illus. A Illus. B
DUALTRIM
1/4" (6)REVEAL
5/16" (8)1/8" (3)
DOOR DOOR
TOP VIEW
Do not exceed the flush inset decorative paneldimensions. Exceeding dimensions could causedamage to the panels and the Sub-Zero unit.
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
SIDE VIEW
Illus. C Illus. D
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
SIDE VIEW
5/16"(8)
3/32"(2)
DOOR /DRAWER
SIDE VIEW
Illus. E
Panel Offsets Illus.
MODEL WS-30
Doors (hinge) / Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom E
Wine Storage 80
Handle Hardware
For overlay and integrated models, handle hardware mustbe provided. Optional stainless steel tubular and prohandles are available through your authorized Sub-Zerodealer.
The door frame has numerous mounting holes on eachside to accommodate handle hardware. Using the pre-drilled holes to attach the handle will provide the bestalignment and strength.
IMPORTANT NOTE: Refer to the full-scale template at theend of this section for a profile of the door frame andposition of the glass. Do not drill through the glass.
Side Panels
MODEL WS-30
When planning for side panels with the installation of themodel WS-30, you need to be aware of the space configu-ration to achieve a pleasing fit. Depending on the exactpanel you are using, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may changethe width of your rough opening.
When installing a model WS-30 with a custom side panel,an accessory kit (7003407) is required. Stainless steelside panels are also available through your authorizedSub-Zero dealer.
The side panel will need to be a minimum of 24" (610)deep and 1/2" (13) thick. Refer to the illustrations below forside panel dimensions. Routing will be necessary so thatthe side panel fits flush against the side of the unit.
Routing detail.
MAINFRAME
SIDE PANELROUTING
1" (25)
17/8" (48)
1/8" (3)
1/2" (13)
84"(2134)
24" (610)
OPTIONALTOE KICKCUT-OUT
4" (102)
17/8"(48)
1" (25)
ROUT TO 1/8" (3)
FRONTOF SIDEPANEL
25/8"(67)
Side panel dimensions.
Accessories
These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.
• Front panels in stainless steel with handle options.
• Grilles for an 83" (2108) or 88" (2235) finished heightfor model WS-30.
• Side panels in stainless steel and white enamel formodel WS-30.
• Tubular and pro handles to match the style of Wolfovens and ranges.
• Door lock kits.
• Dual installation kits.
• Harness kit for Star-K compliance.
STANDARD HANDLE LENGTHS
Refer to the chart below for standard lengths of tubularand pro handles used on wine storage models.
Wine Storage 81
subzero.com/specs
Standard Handle Lengths
315W, 424G AND 424FS DOOR
Tubular Handle 23" (584)
Pro Handle 21" (533)
Stud Spacing 193/4" (502)
427G AND 427RG DOOR DRAWER
Tubular Handle 417/16" (1053) 23" (584)
Pro Handle 391/2" (1003) 21" (533)
Stud Spacing 383/8" (975) 193/4" (502)
WS-30 DOOR
Tubular Handle 637/8" (1622)
Pro Handle 451/8" (1146)
Stud Spacing 437/8" (1114)
A
21/4" (57) Rail /Stile
Glass
A
CL
Cabinet DoorProfile
Door Frame Profile
FULL-SCALE TEMPLATE
The full-scale template below shows an example of thedoor frame profile for wine storage models and the rela-tionship to the overlay panel (rails and stiles).
DOOR FRAME PROFILEMODEL 424G SHOWN
Dimension A
424G and 315W 1" (25)
427G and 427RG 7/8" (22)
WS-30 15/16" (24)
Wine Storage 82
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
For each model, the wine storage shelves have a naturalcherrywood facing. You can replace these strips withwood more complementary to your design and surround-ing cabinetry. Refer to the full-scale template below.
To remove the cherry strips, take the shelves out andremove the screws. Reverse the procedure to affix thenew wood facing.
IMPORTANT NOTE: If you choose to stain or seal thewood facing, be aware that some of these substances arehazardous and will damage stored wine.
Dimension A
315W 1015/16" (278)
424G and 424FS 191/2" (495)
427G and 427RG 2015/15" (532)
WS-30 249/16" (624)
Dimensions will vary for model 315W. Refer to specificationson our website, subzero.com.
A (WIDTH)
Maximum Thickness
FRONT VIEW SIDE VIEW
11/2" (38)
5/8"(16)
7/64"(3)
5/64"(2)
23/64"(9)
9/16" (14)
27/32"(21)
WINE SHELF WOOD FACINGWINE STORAGE MODELS
DOOR CLOSED
MODEL 424
3/4" (19) DOOR PANEL
1/2"(13)
1/8" (3)
MAXIMUM DOOROPENING 145°
1/4" (6)
Wine Storage 83
subzero.com/specs
Door Clearance
FULL-SCALE TEMPLATE
Model 424G should extend a minimumof 1/4" (6) beyond the front surface ofadjoining cabinetry to allow for themaximum 145° door opening. The unitcan be installed flush with adjacentcabinetry, however, there is potentialfor interference with the panel if thedoor is opened past 90°.
DOOR OPENING 145°TOP VIEW
1" (25)0"
SCALE
MODELS 424G (WINE) AND UC-24BG
Undercounter Refrigeration 85
subzero.com/specs
Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, homeoffice or media room. In the kitchen, a high-volume ice maker is a must for entertaining. The design flexibility of thesecompact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They’re ready to be fitted witha custom cabinet panel or can be ordered with a stainless steel panel.
34"(864)
237/8"(606)
335/8"(854)
143/4"(375)
335/8"(854)
143/4"(375)
UC-24RO UC-15I(P) UC-15I(P)O
34"(864)
237/8"(606)
34"(864)
237/8"(606)
34"(864)
237/8"(606)
UC-24R UC-24BG UC-24C(I)
KEY FEATURES
• Overlay and stainless steel design applications.
• Handle options coordinate with handles of Wolfcooking products.
• Models UC-24RO and UC-15I(P)O are rated foroutdoor use.
UNDERCOUNTER MODELS
• Energy efficient; many models are ENERGY STAR®
qualified.
• All models are Star-K certified.
Undercounter Refrigeration 86
237/8" (606) 24" (610)
34"(864)
4" (102)
253/8"(645)
23/8" (60)
MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO
Specifications
143/4" (375) 23" (584)
335/8"(854)
4" (102)
18"(457)
23/8" (60)
MODELS UC-15I(P) and UC-15I(P)O
Overall Dimensions
UNDERCOUNTER MODELS
Capacity / Weight
INTERIOR CAPACITY R CU FT (L) F CU FT (L)
UC-24R, UC-24BG and UC-24RO 5.7 (161)
UC-24C(I) 3.6 (102) 1.1 (31)
ICE STORAGE CAPACITY LBS (KG)
UC-15I(P) and UC-15I(P)O 26 (12)
SHIPPING WEIGHT LBS (KG)
UC-24R, UC-24BG, UC-24C(I) and UC-24RO 130 (59)
UC-15I(P) and UC-15I(P)O 100 (45)
Undercounter Refrigeration 87
subzero.com/specs
Opening Width A
UC-24R, UC-24BG, UC-24C(I) and UC-24RO 24" (610)
UC-15I(P) and UC-15I(P)O 151/4" (387)
24" (610)OPENING
DEPTH
AOPENING WIDTH
24" (610)OPENING DEPTH
341/2" (876)OPENINGHEIGHT
TOP VIEW
FRONT VIEWSIDE VIEW
Opening Dimensions
UNDERCOUNTER MODELS
Planning Information
ELECTRICAL REQUIREMENTS
For ice maker models, the electrical supply can be locatedanywhere on the back wall. For all other undercountermodels, locate the electrical supply within the shaded areashown in the illustration below. Follow the NationalElectrical Code and local codes and ordinances wheninstalling the receptacle. A separate circuit, servicing onlythis appliance, is required.
IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O aredesigned and safe for use in outdoor applications. Wheninstalled outdoors, a ground fault circuit interrupter (GFCI)is required to reduce the risk of electrical shock. A GFCI isnot recommended for use with other undercounter modelsand may cause interruption of operation.
Electrical Requirements
Power Supply 115 V AC, 60 Hz
Circuit Breaker 15 amp
Receptacle 3-prong grounding-type
FRONT VIEW
151/2"(394)
3" (76)
2" (51)
Location of electrical supply.
Undercounter Refrigeration 88
Planning Information
PLUMBING REQUIREMENTS
For model UC-24C(I) and the ice maker models, the watersupply line should be located within the shaded areashown in the illustrations below. The water supply lineshould be connected to the house supply with an easilyaccessible shut-off valve between the supply and the unit.Do not use self-piercing valves. A saddle valve kit(4200880) is available through your authorized Sub-Zerodealer.
The ice maker operates on constant water pressurebetween 20 psi (1.4 bar) and 100 psi (6.9 bar).
IMPORTANT NOTE: In some cases, a reverse osmosiswater filter system may not be able to maintain theminimum pressure consistently.
Plumbing Requirements
Water Supply Line 1/4" OD copper line
Water Pressure 20–100 psi (1.4–6.9 bar)
Excess Water Line for Connection 26" (660) min
FRONT VIEW
SHADED AREAEXTENDS 1/2" (13)FROM BACK WALL
151/2"(394)
3" (76)
2" (51)
Model UC-24C(I). Ice maker models.
LOCATION OFWATER LINE
8"(203)
1/2"(13)
TOP VIEW
Overlay Panel
MODELS UC-24R, UC-24C(I) AND UC-15I(P)
The overlay design allows for a decorative panel to coverthe door trim for a seamless appearance that will comple-ment surrounding cabinetry. You may also choose tomatch the handle hardware of surrounding cabinetry.Refer to the charts for panel specifications.
MODEL UC-24BG
For model UC-24BG, the overlay door panel will consist ofonly a frame and will affix directly to the door with screwsthrough a series of predrilled holes.
The glass area of the door is designed to be exposed toair circulation. Decorative overlays on the glass should bekept to a minimum. Do not install a solid panel on theglass door unit: this may cause moisture to form behindthe panel. Refer to the charts for panel specifications.
IMPORTANT NOTE: The width of rails and stiles can beincreased but should not exceed cabinet manufacturers’standard widths or the overall panel dimensions. The backsides of rails and stiles that will be visible through theglass door will need to be finished along with the insideedges of the frame.
Panel Requirements
MAX PANEL WEIGHT
UC-24R and UC-24C(I) 20 lbs (9 kg)
UC-24BG 10 lbs (5 kg)
UC-15I(P) 15 lbs (7 kg)
MIN PANEL THICKNESS
Overlay Panels 5/8" (16)
Panel Dimensions
UC-24R AND UC-24C(I) W H
Overlay Panel 233/4" (603) 301/16" (764)
UC-24BG W H
Overlay Panel 233/4" (603) 301/16" (764)
Rails and Stiles (min) 21/4" (57)
UC-15I(P) W H
Overlay Panel 15" (381) 303/8" (772)
Undercounter Refrigeration 89
subzero.com/specs
Drain Pump
ICE MAKER MODELS
Undercounter ice maker models can be ordered with orwithout a pump. Models without a drain pump will drainwater from the unit by gravity. A drain must be installed.Refer to the illustrations below.
A gravity drain model may be converted to a pump modelthrough the installation of a drain pump kit availablethrough your authorized Sub-Zero dealer. Installationinstructions are included with the drain pump kit.
The drain and inlet water tubes must be plumbed beforeconnecting to the ice maker. For the gravity drain, all hori-zontal runs of drain lines must have a 1/4" (6) per 12" (305)fall. An air gap will likely be required between the icemaker and the drain receptacle. A stand pipe with a trapbelow it would be acceptable for the drain receptacle.
IMPORTANT NOTE: Poor drainage will cause excessive icemelting in the bin.
151/4"min(387)
OPENING WIDTH
TOP VIEW
TOP VIEW
FRONT VIEW
1/8" (3)
DRAINTUBE
WATERINLET TUBE SHUT-OFF
VALVE
DRAINTUBE
WATERINLETTUBE
SHUT-OFFVALVE
DRAIN
151/4"min(387)
OPENING WIDTH
TOP VIEW
TOP VIEW
FRONT VIEW
1/8" (3)
DRAIN TUBE
SHUT-OFFVALVE
AIR GAPDEVICE
DRAIN TUBE
AIR GAPDEVICE
WATERINLET TUBE
SHUT-OFFVALVE
WATERINLET TUBE
DRAIN PUMPMODELS UC-15IP AND UC-15IPO
GRAVITY DRAINMODELS UC-15I AND UC-15IO
Undercounter Refrigeration 90
Standard Handle Lengths
UNDERCOUNTER MODELS DOOR
Tubular Handle 23" (584)
Pro Handle 21" (533)
Stud Spacing 193/4" (502)
Door Clearance
MODELS UC-24R, UC-24BG AND UC-24C(I)
Undercounter models can be installed flush with surround-ing cabinetry. Depending on the thickness of the overlaydoor panel, it may be necessary to install the unit so that itextends 1/4" (6) beyond the front surface of surroundingcabinetry. This will prevent interference between the doorpanel and adjoining cabinetry at the maximum 145° doorswing. Refer to the full-scale template on page 83 of thewine storage section.
Accessories
These optional accessories are available through yourauthorized Sub-Zero dealer. For local dealer information,visit the showroom locator section of our website,subzero.com.
• Stainless steel front panels with handles.
• Tubular and pro handles to match the style of Wolfovens and ranges.
• Door lock.
• Drain pump kit.
STANDARD HANDLE LENGTHS
Refer to the chart below for standard lengths of tubularand pro handles used on undercounter models.
Glass
CL
1" (25) 1" (25)
21/4" (57) Rail /Stile
Door Panel Profile
Door Frame Profile
FULL-SCALE TEMPLATE
The full-scale template shows the door frame profile formodel UC-24BG and the relationship to the overlay panel(rails and stiles).
DOOR FRAME PROFILEMODEL UC-24BG
Undercounter Refrigeration 91
subzero.com/specs
191/2" (495)
Maximum Thickness
FRONT VIEW SIDE VIEW
11/2" (38)
5/8"(16)
7/64"(3)
5/64"(2)
23/64"(9)
9/16" (14)
27/32"(21)
WINE SHELF WOOD FACINGMODELS UC-24BG AND UC-24C(I)
The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images containedherein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc. ©Sub-Zero, Inc. all rights reserved.
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
For models UC-24BG and UC-24C(I), follow dimensions inthe full-scale template below if you choose to replace thenatural cherrywood facing of the wine shelves with woodmore complementary to your design and surroundingcabinetry.
Sub-Zero Products Limited WarrantyRESIDENTIAL USE ONLY
FULL FIVE YEAR SEALED SYSTEM WARRANTYLIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM
FULL TWO YEAR WARRANTY ON TOTAL PRODUCT*
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any components that prove to be defective in materials or workmanship in the sealed system. Thesealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any part of the product, that proves to be defective in materials or workmanship.
LIMITED SIXTH THROUGH TWELFTH YEAR SEALED SYSTEM WARRANTY
From the 6th through the 12th year from the date of original installation, your Sub-Zero warranty covers allparts that prove to be defective in materials or workmanship in the sealed system (parts only). The sealedsystem consists of the compressor, condenser, evaporator, drier and all connecting tubing.
TERMS APPLICABLE TO EACH WARRANTY
All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized servicecenter, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normalbusiness hours. This warranty applies only to products installed for normal residential use. Details regarding anon-residential warranty are available upon request.
The warranty applies only to products installed in any one of the fifty states of the United States, the Districtof Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct anydefect caused by negligence, accident or improper use, maintenance, installation, service or repair, includingbut not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the con-densing unit.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILLPROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OFLAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGESARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS,IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above lim-itation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also haveother legal rights, which vary from state to state.
To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contactSub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,subzero.com or call 800-222-7820.
*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts andlabor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Sub-Zero Outdoor Products Limited WarrantyRESIDENTIAL USE ONLY
FULL FIVE YEAR SEALED SYSTEM WARRANTY
FULL ONE YEAR WARRANTY ON TOTAL PRODUCT*
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any components that prove to be defective in materials or workmanship in the sealed system. Thesealed system consists of the compressor, condenser, evaporator, drier and all connecting tubing.
FULL ONE YEAR WARRANTY*
For one year from the date of original installation, your Sub-Zero warranty covers all parts and labor to repairor replace any part of the product which proves to be defective in materials or workmanship.
TERMS APPLICABLE TO EACH WARRANTY
All service provided by Sub-Zero under the above warranty must be performed by a Sub-Zero authorized servicecenter, unless otherwise specified by Sub-Zero. Service will be provided in the home during the normalbusiness hours. This warranty applies only to products installed for normal residential use. Details regarding anon-residential warranty are available upon request.
The warranty applies only to products installed in any one of the fifty states of the United States, the Districtof Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct anydefect caused by negligence, accident or improper use, maintenance, installation, service or repair, includingbut not limited to improper removal and reinstallation (whether in the unit or at a remote location) of the con-densing unit.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO WILLPROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OFLAW. SUB-ZERO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGESARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS,IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above lim-itation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also haveother legal rights, which vary from state to state.
To receive parts and/or service and the name of the Sub-Zero authorized service center nearest you, contactSub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website,subzero.com or call 800-222-7820.
*Stainless steel doors, panels, product frames and interior surfaces are covered by a limited 60-day parts andlabor warranty for cosmetic defects.
*Replacement water filters are not covered by the product warranty.
SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820
SZDG 1/2010
Top Related