STEP BY STEP PROCEDURES TO START
STEP BY STEP PROCEDURES TO START
AN IT COMPAY IN TAMIL NADU
CONTENTS
S.NO. DESCRIPTION PAGE
NO.
1. INCORPORATION OF A COMPANY 1
2. BUSINESS REGISTRATION PROCEDURE
-FLOWCHART
12
3. ENTRY STRATEGIES FOR FOREIGN INVESTORS 15
4. INDUSTRIAL POLICY AND PROCEDURES FOR
FOREIGN & NRI INVESTORS
29
5. ABBREVIATIONS 78
6. SUMMARY OF THE PROCEDURES TO START AN
IT COMPANY
81
7. APPROVALS REQUIRED TO START AN IT
COMPANY
104
8. STP&EHTP SCHEMES &PROCEDURES 118
9. BRIEF PROCEDURE FOR SMALL SCALE IT
COMPANY(SSI)
125
10. BRIEF PROCEDURE FOR LARGE/MEDIUM SCALE
IT COMPANY(MSI/LSI)
138
11. FOR INVESTMENTS EXCEEDING US$ 20 MILLION 142
1.Incorporation of a Company
COMPANIES ACT 1956
Incorporation of a company in India is governed by the Companies Act, 1956. Part II of
the Act deal with the incorporation of a company and matters related thereto.
PRIVATE COMPANY
Private company means a company which has a minimum paid-up capital of
Rs,1,00,000/- or such higher paid-up capital as may be prescribed, and by its articles,
(a) restricts the rights to transfer its shares, if any;
(b) limits the number of its members to fifty, not including
(c) Persons who are in the employment of the company ; and
(d)persons who, having been formerly in the employment of the company, were
members of the company while in that employment have continued to be
members after the employment ceased; and
(e) prohibits any invitation to the public to subscribe for any shares in, or debentures
of, the company;
(f) prohibits any invitation or acceptance of deposits from persons other than its
members, directors or their relatives.
PUBLIC COMPANY
A public company is a company which is not a private company , has a minimum paidup
capital of Rs,5,00,000/-or such higher paid-up capital, as may be prescribed; is a
private company which is a subsidiary of a company which is not a private company.
FORMATION OF A PRIVATE LIMITED COMPANY
A private Company can be formed either by
i. incorporation of a new company for doing a new business, or
ii. conversion of existing business of a sole proprietory concern or partnership
firm into a company.
NAME OF COMPANY
The name of a Company is the symbol of its existence. Any suitable name may be
selected for registration subject to the following guidelines :
a. The promoters should select three to four alternative names, quite distinct from
each other.
b. The names should include, as far as possible, activity as per the main objects of
the proposed company.
c. The names should not too closely resemble with the name of any other registered
company.
d. The official guidelines issued by the Central Government should be followed
while selecting the names. Besides, the names so selected should not violate the
provisions of the Emblems and Names (Prevention of Improper Use) Act, 1950.
e. Apply in form 1-A to the Registrar of Companies having jurisdiction along with a
filing fee of Rs. 500.
MEMORANDUM OF ASSOCIATION
An important step in the formation of a company is to prepare a document called
Memorandum of Association. It is the charter of the company and it contains the basic
conditions on which the company is incorporated.
The Memorandum contains the name, the State in which the registered office is to be
situated, main objects of the company to be pursued by the company on its incorporation
and objects incidental or ancillary to the attainment of the main objects, liability of the
members and the authorized capital of the company. The main purpose of the
memorandum is to state the scope of activities and powers of the company.
ARTICLES OF ASSOCIATION
Articles of Association of the company contain rules, regulation and bye-laws for the
general management of the company. It is compulsory to get the Articles of
Associations registered along with the Memorandum of Association in case of a private
company.
The Articles are subordinate to the Memorandum of Association. Therefore, the Articles
should not contain any regulation, which is contrary to provisions of the Memorandum
or the Companies Act. The Articles are binding on the members in relation to the
company as well as on the company in its relation to members.
STEPS TO INCORPORATE PUBLIC LIMITED IT COMPANY :
1. Select, in order of preference, a few suitable names, not less than four, each of
which should indicate as far as possible the main object of the proposed company.
2. Out of the four proposed names as above one name will be the main and other
three to be mentioned in order of preference.
3. Avoid names which resemble too closely or are the same as the names of any
other company already registered and also avoid names with the words Stock
Exchange as part of the name.
4. Names starting with small alphabets can be used but before using such names it
should be ensured that such names do not have phonetic or visual resemblance to
the name of a company in existence.
5. Follow the guidelines issued by the Central Government for availability or
otherwise of certain names.
6. See that the name chosen does not violate the provisions of Emblems and Names
(Prevention of Improper Use) Act, 1950.
7. Also see that the name chosen does not contain words like mutual funds
forming part of your proposed company unless it is going to be incorporated
actually as a mutual fund company.
8. Apply to the Registrar of Companies to ascertain which of the names selected by
you is available.
9. An application in Form No. 1A is prescribed in this regard by the companies
(Central Government's) General Rules and Forms, 1956 and a fee of Rs. 500/- is
payable with each application
10.See that one of the promoters is kept as the subscriber to the memorandum and
articles of association of the proposed company.
11.Pay the fee for the application for availability of name in cash to the Registrar of
Companies.
12.The Registrar of Companies will ordinarily inform within a period of seven days
from the date of submission of your application whether any of the names applied
for is available or not.
13.If the same is not made available, apply again to the Registrar of Companies
selecting fresh names with required application fee .
14.Get the memorandum and Articles of Associations suitably drafted.
(a) The Articles of Association need not necessarily be prepared and registered
in the case of public companies limited by shares as in that case, Table 'A' of schedule I
shall apply, but in practice, they are invariably prepared and registered to suit individual
requirement;
(b) While drafting ensure that Memorandum and Articles of Association are
divided into paragraphs numbered consequently;
15.Ensure that the authorized share capital of the proposed public company is or
more than Rs. 5 lakhs or such higher amount as may be prescribed to be the minimum
paid up capital for a public company
16.Before finally printing the Memorandum and Articles of Association get proper
guidance from the concerned Registrar of Companies, so that at their time of registration
there are less corrections and alterations.
17.Keep in mind that computer printed Memorandum and Articles of Association
will be accepted and taken on record by all the Registrar of Companies from now on.
18.Get both the Memorandum and Articles of Association stamped as per the Indian
Stamp Act or the relevant State Act and the notifications thereunder in force in
your state.
19. Get both the Memorandum and Articles of Association after being stamped and
duly signed by at least seven subscribers, each of whom will also write in his own
hand, his father's name, occupation, address and the number of shares subscribed
for.
20. There will be at least one witness to these signatures as mentioned above who will
sign and write in his own hand his father's name, occupation and address.
21. The aforesaid two documents may be signed on behalf of the subscribes by their
agents duly authorized by power of attorney.
22. Both these documents will then be dated.
23. See that the date given on these two documents is any date after the date of
stamping of them and not before that date.
24. Get the following Forms duly filled up and signed:-
On registration a public company cannot commence business so long it
does not obtain Certificate of Commencement of Business.
Please note that if you propose to incorporate a private company as a
subsidiary of a public company, it will be treated as a public company.
2.BUSINESS REGISTRATION
PROCEDURE-FLOWCHART
START
Obtaining approval for the proposed name
of the company form the ROC
Drawing up the Memorandum of Association
Drawing up the Articles of Association.
Getting the appropriate persons to subscribe
to the Memorandum(a minimum of 7 for a public
company and 2 for a
private company)
Payment of registration
Fee to the ROC
Receipt of Certificate of
incorporation
Obtain a certificate of
commencement of
business from ROC in case
of a public company
End
3.ENTRY STRATEGIES FOR
FOREIGN INVESTORS
POLICY & PROCEDURES
Manual on Industrial Policies & Procedures in India Latest Changes in
Policy/ FIPB/ PAB
Entry Strategies for Foreign Investors Guidelines About External
Commercial Borrowings
Proforma for Applications
Entry Strategies for Foreign Investors
STARTING OPERATIONS IN INDIA
A foreign company planning to set up business operations in
India has the following options
AS AN INDIAN COMPANY
A foreign company can commence operations
in India by incorporating a company under the
Companies Act,1956 through
Joint Ventures; or
Wholly Owned Subsidiaries
Foreign equity in such Indian companies can be
up to 100% depending on the requirements of
the investor, subject to equity caps in respect of
the area of activities under the Foreign Direct
Investment (FDI) policy. Details of the FDI
policy, sectoral equity caps & procedures can
be obtained from Department of Industrial
Policy & Promotion, Government of India
(http://www.dipp.nic.in ).
Joint Venture
With An
Indian
Partner
Foreign Companies can set up their operations
in India by forging strategic alliances with
Indian partners.
Joint Venture may entail the following
advantages for a foreign investor:
Established distribution/ marketing set up
of the Indian partner
Available financial resource of the Indian
partners
Established contacts of the Indian
partners which help smoothen the process
of setting up of operations
Wholly
Owned
Subsidiary
Company
Foreign companies can also set up whollyowned
subsidiary in sectors where 100%
foreign direct investment is permitted under the
FDI policy.
Incorporation
of Company
For registration and incorporation, an
application has to be filed with Registrar of
Companies (ROC). Once a company has been
duly registered and incorporated as an Indian
company, it is subject to Indian laws and
regulations as applicable to other domestic
Indian companies.
For details please visit the website of
Department of Company Affairs under Ministry
of Finance at http://dca.nic.in
AS A FOREIGN COMPANY
Foreign Companies can set up their operations
in India through
Liaison Office/Representative Office
Project Office
Branch Office
Such offices can undertake any permitted
activities. Companies have to register
themselves with Registrar of Companies (ROC)
within 30 days of setting up a place of business
in India.
Liaison
Office/Represe
ntative Office
Liaison office acts as a channel of
communication between the principal place of
business or head office and entities in India.
Liaison office cannot undertake any
commercial activity directly or indirectly and
cannot, therefore, earn any income in India.
Its role is limited to collecting information
about possible market opportunities and
providing information about the company and
its products to prospective Indian customers. It
can promote export/import from/to India and
also facilitate technical/financial collaboration
between parent company and companies in
India.
Approval for establishing a liaison office in
India is granted by Reserve Bank of India
(RBI).
Project Office Foreign Companies planning to execute
specific projects in India can set up temporary
project/site offices in India. RBI has now
granted general permission to foreign entities to
establish Project Offices subject to specified
conditions. Such offices can not undertake or
carry on any activity other than the activity
relating and incidental to execution of the
project. Project Offices may remit outside
India the surplus of the project on its
completion, general permission for which has
been granted by the RBI.
Branch Office Foreign companies engaged in manufacturing
and trading activities abroad are allowed to set
up Branch Offices in India for the following
purposes:
(i) Export/Import of goods
(ii)Rendering professional or
consultancy services
(iii) Carrying out research work, in which the
parent company is engaged.
(iv) Promoting technical or financial
collaborations between Indian companies
and parent or overseas group company.
(v) Representing the parent company in
India and acting as buying/selling
agents in India.
(vi) Rendering services in Information
Technology and development of
software in India.
(vii) Rendering technical support to the
products supplied by the parent/
group companies.
(viii)Foreign airline/shipping company.
A branch office is not allowed to carry
out manufacturing activities on its
own but is permitted to subcontract
these to an Indian manufacturer.
Branch Offices established with
the approval of RBI, may remit
outside India profit of the branch,
net of applicable Indian taxes and
subject to RBI guidelines
Permission for setting up branch
offices is granted by the Reserve
Bank of India (RBI).
Branch Office
on Stand
Alone Basis
Such Branch Offices would be isolated and
restricted to the Special Economic zone (SEZ)
alone and no business activity/transaction will
be allowed outside the SEZs in India, which
include branches/subsidiaries of its parent
office in India.
No approval shall be necessary from RBI for a
company to establish a branch/unit in SEZs to
undertake manufacturing and service activities
subject to specified conditions.
Application for setting up Liaison Office/
Project Office/ Branch Office may be submitted
in form FNC 1 (available at RBI website at
www.rbi.org.in )
FOREIGN DIRECT INVESTMENT (FDI) POLICY
FDI under automatic route is now allowed in all
sectors, including the services sector, except a
few sectors where the existing and notified
sectoral policy does not permit FDI beyond a
ceiling.
Automatic
Route
No prior approval is required for FDI under the
Automatic Route. Only information to the RBI
within 30days of inward remittances or issue of
shares to Non Residents is required. RBI has
prescribed a new form, Form FC-GPR (instead
of earlier FC-RBI) for reporting shares issued
to the Foreign Investors by an Indian company.
For details please contact:
ChiefGeneralManager,
ReserveBankofIndia,
ForeignInvestmentandTechnologyTransfer
Division,
ExchangeControlDepartment,
ShaheedBhagatSinghRoad,
Mumbai400001.
Tel.:+91-22-22661603
Fax + 91-22-2266 5330
Government
Approval
Foreign Investment proposed not covered under
the Automatic Route are considered for
Governmental Approval on the
recommendations of the Foreign Investment
Promotion Board (FIPB)
Foreign Investors NonResident Indians
Application for such
cases are to be
submitted in FC/IL
form or on plain
paper to Foreign
Investment
Promotion Board
(FIPB) in
Department of
Economic Affairs,
Ministry of Finance,
Government of
India North Block,
New Delhi 110 001.
Non Resident Indians
are required to submit
their proposals to the
Secretariat for
Industrial Assistance
(SIA) Department of
Industrial Policy and
Promotion,
Government of India
for consideration of
FIPB.
TAXATION IN INDIA
India is moving towards reforming its tax
policies and systems so as to facilitate
globalization of economic activities. The
corporate tax rate for foreign companies is
40%. The net tax rate is far lower than this on
account of various deductions and exemptions
available under the tax laws. Tax holidays are
available in Special Economic Zones set up to
make industry globally competitive.
Infrastructure Sector Projects enjoy special tax
treatment/holidays. A user friendly tax
administration has been introduced with round
the clock electronic filing of customs
documents from 31.3.04
For details regarding taxes in India, please
contact Ministry of Finance, Government of
India, North Block, New Delhi 110 001
through their website
http://finmin.nic.in/topics/taxation/index.html
INVESTMENT FACILITATION
Secretariat for Industrial Assistance (SIA) in
Department of Industrial Policy and Promotion,
Government of India provides a single window
service for entrepreneurial assistance, Investor
facilitation and monitoring implementation of
the projects.
Secretariat for Industrial Assistance (SIA)
Department of Industrial Policy and Promotion
MinistryofCommerce&Industry
UdyogBhavan, NewDelhi-110 011
Email:[email protected]
Tel.:+91-11-23011983
Fax : +91-11-23011034
USEFUL ADDRESSES
Department of Industrial Policy and
Promotion
Joint Secretary
Secretariat for Industrial Assistance
(SIA)Ministry of commerce & Industry
Udyog Bhavan, New Delhi-110 011 ,INDIA
Tel.: +91-11-23011983
Fax : +91-11-23011034
E-mail: [email protected]
Website: http://dipp.nic.in
Reserve Bank of India (RBI)
Foreign Investment Division,Shaheed Bhagat
Singh Road, Mumbai-400 001, INDIA
Tel.: + 91-22-2266 1603
Fax :+ 91-22-2266 5330
Web site: http://www:rbi.org.in
Registrar of Companies
Department of Company Affairs
Ministry of Finance
B Block, IInd Floor, Paryavaran Bhawan
C.G.O. Complex, New Delhi-110 003, INDIA
Tel.: +91-11-24362708
Website: http://dca.nic.in
4.INDUSTRIAL POLICY AND
PROCEDURES FOR FOREIGN
&NRI INVESTORS.
POLICY
INDUSTRIAL POLICY FOREIGN DIRECT
INVESTMENT
INVESTMENT BY NON
RESIDENT INDIANS
OVERSEAS CORPORATE
BODIES
FOREIGN TECHNOLOGY
AGREEMENTS
Automatic/ Govt Approvall
100% EXPORT
ORIENTED UNITS/
EXPORT PROCESSING
ZONES
Automatic/ Govt Approval
ELECTRONIC
HARDWARE
TECHNOLOGY PARK,
SOFTWARE
TECHNOLOGY PARK
SCHEMES AND SPECIAL
ECONOMIC ZONES
Automatic/ Govt Approvall
1. INDUSTRIAL POLICY
Industrial Licensing IEM
Locational
Policy
Policy Relating to Small Scale
Undertakings
Environmental
Clearances
The Government's liberalisation and economic reforms programme aims at rapid and
substantial economic growth, and integration with the global economy in a harmonised
manner. The industrial policy reforms have reduced the industrial licensing
requirements, removed restrictions on investment and expansion ,and facilitated easy
access to foreign technology and foreign direct investment.
Industrial Licensing
1.1 All industrial undertakings are exempt from obtaining an industrial licence to
manufacture, except for (i) industries reserved for the Public Sector (Annex I), (ii)
industries retained under compulsory licensing(Annex II), (iii) items of manufacture
reserved for the small scale sector and (iv) if the proposal attracts locational
restriction.[For procedure to obtain Industrial Licence refer to para 7.2].
Industrial Entrepreneurs Memorandum (IEM)
1.2 Industrial undertakings exempt from obtaining an industrial license are required to
file an Industrial Entrepreneur Memoranda(IEM) in Part 'A' (as per prescribed format)
with the Secretariat of Industrial Assistance(SIA), Department of Industrial Policy and
Promotion, Government of India, and obtain an acknowledgement. No further approval
is required. Immediately after commencement of commercial production, Part B of the
IEM has to be filled in the prescribed format. The facility for amendment of existing
IEMs has also been introduced. [For procedure to file IEM refer to para 7.1].
Locational Policy
1.3 Industrial undertakings are free to select the location of a project. In the case of cities
with population of more than a million (as per the 1991 census), however, the proposed
location should be at least 25 KM away from the Standard Urban Area limits of that city
unless, it is to be located in an area designated as an "industrial area" before the 25th
July, 1991.(List of cities with population of 1 million and above is given at Annexure-
V). Electronics, Computer software and Printing (and any other industry which may be
notified in future as "non polluting industry") are exempt from such locational
restriction. Relaxation in the aforesaid locational restriction is possible if an industrial
license is obtained as per the notified procedure.
1.4 The location of industrial units is further regulated by the local zoning and land use
regulations as also the environmental regulations. Hence, even if the requirement of the
locational policy stated in paragraph 1.3 is fulfilled, if the local zoning and land use
regulations of a State Government, or the regulations of the Ministry of Environment do
not permit setting up of an industry at a location, the entrepreneur would be required to
abide by that decision.
Policy Relating to Small Scale Undertakings
1.5 An industrial undertaking is defined as a small scale unit if the investment in fixed
assets in plant and machinery does not exceed Rs 10 million. The Small Scale units can
get registered with the Directorate of Industries/District Industries Centre in the State
Government concerned. Such units can manufacture any item including those notified as
exclusively reserved for manufacture in the small scale sector. Small scale units are also
free from locational restrictions cited in paragraph 1.3 above. However, a small scale
unit is not permitted more than 24 per cent equity in its paid up capital from any
industrial undertaking either foreign or domestic.
1.6 Manufacture of items reserved for the small scale sector can also be taken up by
non- small scale units, if they apply for and obtain an industrial license. In such cases, it
is mandatory for the non-small scale unit to undertake minimum export obligation of 50
per cent. This will not apply to non-small scale EOUs that are engaged in the
manufacture of items reserved for the SSI sector, as they already have a minimum
export obligation of 66 per cent of their production. In addition, if the equity holding
from another company (including foreign equity) exceeds 24 per cent, even if the
investment in plant and machinery in the unit does not exceed Rs 10 million, the unit
loses its small scale status. An IEM is required to be filed in such a case for de-licensed
industries, and an industrial license is to be obtained in the case of items of manufacture
covered under compulsory licensing.
1.7 A small scale unit manufacturing small scale reserved item(s), on exceeding the
small scale investment ceiling in plant and machinery by virtue of natural growth, needs
to apply for and obtain a Carry-on-Business(COB) License. No export obligation is
fixed on the capacity for which the COB license is granted. However, if the unit expands
its capacity for the small scale reserved item(s) further, it needs to apply for and obtain a
separate industrial license. (For procedure to obtain COB licence, refer to para 7.2(d)).
1.8 It is possible that a chemical or a by-product recoverable through pollution control
measures is reserved for the small scale sector. With a view to adopting pollution control
measures, Government have decided that an application needs to be made for grant of an
Industrial Licence for such reserved items which would be considered for approval
without necessarily imposing the mandatory export obligation.
Environmental Clearances
1.9 Entrepreneurs are required to obtain Statutory clearances relating to Pollution
Control and Environment for setting up an industrial project. A Notification (SO 60(E)
dated 27.1.94) issued under The Environment Protection Act 1986 has listed 29 projects
in respect of which environmental clearance needs to be obtained from the Ministry of
Environment, Government of India. This list includes industries like petro-chemical
complexes, petroleum refineries, cement, thermal power plants, bulk drugs, fertilisers,
dyes, paper etc. However if investment is less than Rs. 500 million, such clearance is not
necessary, unless it is for pesticides, bulk drugs and pharmaceuticals, asbestos and
asbestos products, integrated paint complexes, mining projects, tourism projects of
certain parameters, tarred roads in Himalayan areas, distilleries, dyes, foundries and
electroplating industries. Further, any item reserved for the small scale sector with
investment of less than Rs 10 million is also exempt from obtaining environmental
clearance from the Central Government under the Notification. Powers have been
delegated to the State Governments for grant of environmental clearance for certain
categories of thermal power plants. Setting up industries in certain locations considered
ecologically fragile (eg Aravalli Range, coastal areas, Doon valley, Dahanu, etc.) are
guided by separate guidelines issued by the Ministry of Environment of the Government
of India.[For procedure to obtain environmental clearance, refer to para 21.1].
2. FOREIGN DIRECT INVESTMENT
Automatic Route Government Approval Issue and Valuation of
New Ventures Existing
Companies
Shares in case of existing
companies
Foreign Investment in the
Small Scale Sector
Foreign Investment Policy
for Trading Activities
Other Modes of Foreign
Direct Investments
Preference Shares
Government wishes to facilitate foreign direct investment (FDI) and investment from
Non-Resident Indians (NRI)s including Overseas Corporate Bodies (OCBs), that are
predominantly owned by them, to complement and supplement domestic investment.
Investment and returns are freely repatriable, except where the approval is subject to
specific conditions such as lock in period on original investment, dividend cap, foreign
exchange neutrality, etc. as per the notified sectoral policy.The condition of dividend
balancing that was applicable to FDI in 22 specified consumer goods industries stands
withdrawn for dividends declared after 14th July 200, the date on which Press Note. No.
7 of 2000 Series was issued.
2.1 Foreign direct investment is freely allowed in all sectors including the services
sector, except where the existing and notified sectoral policy does not permit FDI
beyond a ceiling. FDI for virtually all items/activities can be brought in through the
automatic route under powers delegated to the Reserve Bank of India (RBI), and for the
remaining items/activities through Government Approval. Government approvals are
accorded on the recommendation of the Foreign Investment Promotion Board (FIPB),
chaired by the Secretary, Department of Industrial Policy and Promotion (Ministry of
Commerce and Industry) with the Union Finance Secretary, Commerce Secretary, and
other key Secretaries of the Government as its members.
Automatic Route
(a) New Ventures
2.2 All items/activities for FDI/NRI/OCB investment up to 100% fall under the
Automatic Route except those covered under (i) to (iv) of para 2.9. Whenever any
investor chooses to make an application to the FIPB and not to avail of the automatic
route, he or she may do so.
Investment in Public Sector Units as also for EOU/EPZ/SEZ/EHTP/STP units would
also qualify for the Automaic Route. Investment under the Automatic Route shall
continue to be governed by the notified sectoral policy and equity caps and RBI will
ensure compliance of the same. The National Industrial Classificatrion (NIC) 1987 shall
remain applicable for description of activities and classification for all matters relating
to FDI/NRI/OCB investment:
Areas/Sectors/Activities hitherto not open to FDI/NRI/OCB investment shall continue to
be so unless otherwise decided and notified by Government. Henceforth any change in
sectoral policy/sectoral equity cap shall be notified by the Secretariat for Industrial
Assistance (SIA) in the Department of Industrial Policy & Promotion.
(b) Existing Companies
2.3 Besides nw companies, automatic route for FDI/NRI/OCB investment is alsoe
available to the existing companies to induct foreign equity. For existing companies with
an expansion programme, the additional requirement are that (I) the increase in equity
level must result from the expansion of the equity base of the existing company without
acquisition of existing shares by NRI/OCB/foreign investors, (ii) the money to be
remitted should be in the sector(s) under the automatic route. Otherwise the proposal
would need Government approval through the FIPB. For this, the proposal must be
supported by a Board Resolution of the existing Indian company.
2.4 For existing companies without an expansion programme, the additional
requirements for eligibility for automatic route are (I) that they are engaged in the
industries under automatic route (including additional activities covered under the
automatic route regardless of whether the original activities were undertaken with
Government approval or by accessing the automatic route), (ii) the increase in equity
level must be from expansion of the equity base and (iii) the foreign equity must be in
foreign currency.
2.5 The earlier SEBI requirement, applicable to public limited companies, that shares
allotted on preferential basis shall not be transferable in any manner for a period of 5
years from the date of their allotment has now been modified to the extent that not more
than 20 per cent of the entire contribution brought in by promoter cumulatively in public
or preferential issue shall be locked in.
2.6 The automatic route for FDI and/or technology collaboration would not be available
to those who have or had any previous joint venture or technology transfer/trade mark
agreement in the same or allied field in India.
2.7 Equity participation by international financial institutions such as ADB, IFC, CDC,
DEG , etc. in domestic companies is permitted through automatic route subject to
SEBI/RBI regulations and sector specific caps on FDI.
2.8 In a major drive to simplify procedures for foreign direct investment under the
"automatic route", RBI has given permission to Indian Companies to accept investment
under this route without obtaining prior approval from RBI. Investors are required to
notifiy the Regional Ofice concerned of the RBI of receipt of inward remittances within
30 days of such receipt and file required documentation within 30 days of issue of shares
to Foreign Investors. This facility is available to NRI/OCB investment also. [For
procedure relating to automatic approval, refer to para 8.1].
Government Approval
2.9 For the following categories, Government approval for FDI/NRI/OCB through the
FIPB shall be necessary:-
i. All proposals that require an Industrial Licence which includes (i) the item
requiring an Industrial Licence under the Industries (Development and
Regulation) Act, 1951; (ii) foreign investment being more than 24% in the equity
capital of units manufacturing items reserved for small scale industries; and (iii)
all items which require an Industrial Licence in terms of the locational policy
notified by Government under the New Industrial Policy of 1991.
ii. All proposals in which the foreign collaborator has a previous venture/tieup in
India. The modalities prescribed in Press Note No. 18 dated 14.12.98 of 1998
series, shall apply in such cases. However, this shall not apply to investment made
by multilateral financial institutions such as ADB,IFC,CDC,DEG, etc. as also
investment made in IT sector.
iii.All proposals relating to acquisition of shares in an existing Indian company in
favour of a foreign/NRI/OCB investor.
iv.All proposals falling outside notified sectoral policy/caps or under sectors in
which FDI is not permitted. Whenever any investor chooses to make an
application to the FIPB and not to avail of the automatic route, he or she may do
so.
Areas/Sectors/Activities hitherto not open to FDI/NRI/OCB investment shall continue to
be so unless otherwise decided and notified by Government. Henceforth any change in
sectoral policy/sectoral equity cap shall be notified by the Secretariat for Industrial
Assistance (SIA) in the Department of Industrial Policy & Promotion.
2.10 RBI has granted general permission under Foreign Exchange Management Act
(FEMA ) in respect of proposals approved by the Government. Indian companies getting
foreign investment approval through FIPB route do not require any further clearance
from RBI for the purpose of receiving inward remittance and issue of shares to the
foreign investors. Such companies are, however, required to notify the Regional Office
concerned of the RBI of receipt of inward remittances within 30 days of such receipt and
to file the required document with the concerned Regional Offices of the RBI within 30
days after issue of shares to the foreign investors.
2.11 For greater transparency in the approval process, Government have announced
guidelines for consideration of FDI proposals by the FIPB. The guidelines are stated in
Annexure-III . The sector specific guidelines for FDI and Foreign Technology
Collaborations are stated in Annexure-IV. [For procedure relating to Government
approval, refer to para 8.2].
Issue and Valuation of Shares in case of existing companies
2.12 Allotment of shares on preferential basis shall be as per the requirements of the
Companies Act, 1956, which will require special resolution in case of a public limited
company. In case of listed companies, valuation shall be as per the RBI/SEBI guidelines
as follows:
The issue price shall be either at :
a) The average of the weekly high and low of the closing prices of the related shares
quoted on the Stock Exchange during the six months preceding the relevant date or b)
The average of the weekly high and low of the closing prices of the related shares
quoted on the Stock Exchange during the two weeks preceding the relevant date.
The stock exchange referred to is the one at which the highest trading volume in respect
of the share of the company has been recorded during the preceding six months prior to
the relevant date.
The relevant date is the date thirty days prior to the date on which the meeting of the
General Boby of the shareholder is convened.
In all other cases a company may issue shares as per the RBI regulation in accordance
with the guidelines issued by the erstwhile Controller of Capital Issues.
Other relevant guidelines of Securities and Exchange Board of India (SEBI)/(RBI)
including the SEBI (Substantial
Acquisition of Shares and Takeover) Regulations, 1997, wherever applicable, would
need to be followed.
Foreign Investment in the Small Scale Sector
2.13 Under the small scale policy, equity holding by other units including foreign equity
in a small scale undertaking is permissible up to 24 per cent. However there is no bar on
higher equity holding for foreign investment if the unit is willing to give up its small
scale status. In case of foreign investment beyond 24 per cent in a small scale unit which
manufactures small scale reserved item(s), an industrial license carrying a mandatory
export obligation of 50 per cent would need to be obtained.
Foreign Investment Policy for Trading Activities
2.14 Foreign investment for trading can be approved through the automatic route up to
51% foreign equity, and beyond this by the Government through FIPB. For approval
through the automatic route, the requirement would be that it is primarily export
activities and the undertaking concerned is an export house/trading house/ super trading
house/star trading house registered under the provisions of the Export and Import policy
in force. The sectoral policy of trading activities is elaborated at S. No. 8 viz. Trading of
Annexure IV (Sector Specific Guidelines for Foreign Direct Investment) of this Manual.
2.15 Both in the case of automatic and Government approvals, the valuation and pricing
of shares would be governed by the provisions stated in paragraph 2.11 above. Closely
held companies would also be governed, mutatis mutandis, by the same guidelines.
Other Modes of Foreign Direct Investments
2.16 Global Depository Receipts(GDR)/American Deposit Receipts (ADR)/Foreign
Currency Convertible Bonds (FCCB): Foreign Investment through GDRs/ADRs,
Foreign Currency Convertible Bonds (FCCBs) are treated as Foreign Direct Investment.
Indian companies are allowed to raise equity capital in the international market through
the issue of GDR/ADRs/FCCBs. These are not subject to any ceilings on investment. An
applicant company seeking Government's approval in this regard should have a
consistent track record for good performance (financial or otherwise) for a minimum
period of 3 years. This condition can be relaxed for infrastructure projects such as power
generation, telecommunication, petroleum exploration and refining, ports, airports and
roads.
2.17 There is no restriction on the number of GDRs/ADRs/FCCBs to be floated by a
company or a group of companies in a financial year. A company engaged in the
manufacture of items covered under Automatic Route is likely to exceed the precentage
limits under the Automatic Route, whose direct foreign investment after a proposed
GDR/ADR/FCCBs issue is likely to exceed 50 per cent/51 per cent/74 per cent as the
case may be, or which is implementing a project not contained in project falling under
Government Approval route, would need to obtain prior Government clearance through
FIPB before seeking final approval from the Ministry of Finance.
2.18 There are no end-use restrictions on GDR/ADR issue proceeds, except for an
express ban on investment in real estate and stock markets. The FCCB issue proceeds
need to conform to external commercial borrowing end use requirements; in addition, 25
per cent of the FCCB proceeds can be used for general corporate restructuring.
Preference Shares
2.19 Foreign investment through preference shares is treated as foreign direct
investment. Proposals are processed either through the automatic route or FIPB as the
case may be. The following guidelines apply to issue of such shares:- (i) Foreign
investment in preference share are considered as part of share capital and fall outside the
External Commercial Borrowing (ECB) guidelines/cap (ii) Preference shares to be
treated as foreign direct equity for purpose of sectoral caps on foreign equity, where
such caps are prescribed, provided they carry a conversion option. If the preference
shares are structured without such conversion option, they would fall outside the foreign
direct equity cap. (iii) Duration for conversion shall be as per the maximum limit
prescribed under the Companies Act or what has been agreed to in the share holders
agreement whichever is less. (iv) The dividend rate would not exceed the limit
prescribed by the Ministry of Finance. (v) Issue of Preference Shares should conform to
guidelines prescribed by the SEBI and RBI and other statutory requirements.
3. INVESTMENT BY NON RESIDENT INDIANS OVERSEAS CORPORATE
BODIES
3.1 For all sectors excluding those falling under Government Approval, NRIs (which
also includes PIOs) and OCBs (an overseas corporate body means a company or other
entity owned directly or indirectly to the extent of at least 60% by NRIs) are eligible to
bring investment through the Automatic Route of RBI. All other proposals which do not
fulfill any or all of the criteria for automatic approval are considered by the Government
through the FIPB.
3.2 The NRIs and OCBs are allowed to invest in housing and real estate development
sector, in which foreign direct investment is not permitted. They are allowed to hold up
to100 per cent equity in civil aviation sector in which otherwise foreign equity only up
to 40 per cent is permitted.
4. FOREIGN TECHNOLOGY AGREEMENTS
4.1 With a view to injecting the desired level of technological dynamism in Indian
industry and for promoting an industrial environment where the acquisition of
technological capability receives priority, foreign technology induction is encouraged
both through FDI and through foreign technology collaboration agreements. Foreign
technology collaborations are permitted either through the automatic route under
delegated powers exercised by the RBI, or by the Government. However, cases
involving industrial licenses/small scale reserved items do not qualify for automatic
approval and would require consideration and approval by the Government. Automatic
route for technology colloboration would also not be available to those who have, or had
any previous technology transfer/trade-mark agreement in the same or allied field in
India. Further, automatic approval for EOU/EHTP/STP units are governed by provisions
under Para 5.2 and 6.2.
Automatic Approval
4.2 The Reserve Bank of India, through its regional offices, accords automatic approval
to all industries for foreign technology collaboration agreements subject to (i) the lump
sum payments not exceeding US $ 2 Million; (ii) royalty payable being limited to 5 per
cent for domestic sales and 8 per cent for exports, subject to a total payment of 8 per
cent on sales over a 10 year period; and (iii) the period for payment of royalty not
exceeding 7 years from the date of commencement of commercial production, or 10
years from the date of agreement, whichever is earlier (The aforesaid royalty limits are
net of taxes and are calculated according to standard conditions). [For procedure for
automatic approval, refer to para 9.1.
Payment of royalty up to 2% for exports and 1% for domestic sales is allowed under
automatic route on use of trademarks and brand name of the foreign collaborator without
technology transfer. In case of technology transfer, payment of royalty subsumes the
payment of royalty for use of trademark and brand name of the foreign collaborator.
Royalty on brand name/trade mark shall be paid as a percentage of net sales, viz., gross
sales less agents'/dealers' commission, transport cost, including ocean freight, insurance,
duties, taxes and other charges, and cost of raw materials, parts, components imported
from the foreign licensor or its subsidiary/affiliated company.
Payment of royalty upto 8% on exports and 5% on domestic sales by wholly owned
subsidiaries to offshore parent companies is allowed under the automatic route without
any restriction on the duration of royalty payments.
Government Approval
4.3 For the following categories, Government approval would be necessary: (a)
proposals attracting compulsory licensing (b) Items of manufacture reserved for the
small acale sector (c) Proposals involving any previous joint venture, or technology
transfer/trademark agreement in the same or allied field in India. The definition of
"same" and "allied" field would be as per 4 digit NIC 1987 Code and 3 digit NIC 1987
Code. (d) Extension of foreign technology collaboration agreements (including those
cases which may have received automatic approval in the first instace) (e) Proposals not
meeting any or all of the parameters for automatic approval as given in para 4.2.
[For procedure for Government approval refer to Para 9.2]
4.4 The items of foreign technology collaboration which are eligible for approval
through the automatic route, and by the Government are technical know how fees,
payment for design and drawing, payment for engineering service and royalty. Exclusive
payment for use of brand names and trademarks are not allowed, although such
payments may be subsumed in the other fee payable.
4.5 Payments for hiring of foreign technicians, deputation of Indian technicians abroad,
and testing of indigenous raw material, products, indigenously developed technology in
foreign countries are governed by separate RBI procedures and rules and are not covered
by the foreign technology collaboration approval. Similarly, payments for imports of
plant and machinery and raw material are also not covered by the foreign technology
collaboration approval. For any of these items, entrepreneurs may contact the RBI.
5. 100% EXPORT ORIENTED UNITS/ EXPORT PROCESSING ZONES/
SPECIAL ECONOMIC ZONES/ INDUSTRIAL PARKS
5.1(a) 100 per cent Export Oriented Units (EOUs) and units in the Export Processing
Zones (EPZs)/Special Economic Zones (SEZs), enjoy a package of incentives and
facilities, which include duty free imports of all types of capital goods, raw material, and
consumables in addition to tax holidays against export.
5.1(b) 100 per cent FDI is permitted under automatic route for setting up of Industrial
Park/Industrial Model Town/Special Economic Zones in the country. To encourage
investment in this sector, 100 per cent income tax exemption for 10 years within a block
of 15 years is also granted for the Industrial Parks set up during the period 1.4.1997 to
31.3.2006.
Automatic Approval
5.2 The Development Commissioners (DCs) of Export Processing Zones (EPZs) /Free
Trade Zones (FTZS)/Special Economic Zones (SEZs) accord automatic approval to
projects where (a) Activity proposed does not attract compulsory licensing or falls in the
services sector except IT enabled services; (b) Location is in conformity with the
prescribed parameters; (c) Units undertake to achieve exports and value addition norms
as prescribed in the Export and Import Policy in force; (d) Unit is amenable to bonding
by customs autorities; and (e) Unit has projected the minimum export turnover, as
specified in the Handbook of Procedures for Export and Import.
All proposals for FDI/NRI/OCB investments in EOU/EPZ units qualify for approval
through automatic route subject to the sectoral norms. Proposals not covered under the
sutomatic route would be considered and approved by FIPB. [For procedure for
automatic approval, refer to para 10.1 & 10.5].
5.3 Conversion of existing Domestic Tariff Area (DTA) units into EOU is also
permitted under automatic route, if the DTA unit satisfies the parameters mentioned
above and there is no outstanding export obligation under any other Export Oriented
scheme of the Government of India.
5.4 FDI upto100% is allowed through the automatic route for all manufacturing
activities in Special Economic Zones (SEZs), except for the following activities :
a. arms and ammunition, explosives and allied items of defence equipments defence
aircraft and warships;
b. atomic sustances;
c. narcotics and psychotropic substances and hazardous chemicals;
d. distillation and brewing of alcoholic drinks; and
e. cigarettes/cigars and manufactured tobacco substitutes.
For services, norms as notified, would be applicable
Government Approval
5.5 All proposals which do not meet any or all of the parameters for automatic approval
will be considered and approved by the Board of Approval of EOU/EPZ/SEZ set up in
the Department of Commerce.
6. ELECTRONIC HARDWARE TECHNOLOGY PARK , SOFTWARE
TECHNOLOGY PARK SCHEMES AND SPECIAL ECONOMIC ZONES
6.1 In order to provide impetus to the electronics industry, to enhance its export
potential and to develop an efficient electronic component industry, Electronic
Hardware Technology Park (EHTP), Software Technology Park (STP) schemes and
Special Economic Zones (SEZ) offer a package of incentives and facilities like duty free
imports on the lines of the EOU Scheme, deemed exports benefits and tax holidays.
Automatic Approval
6.2 The Directors of STPs in respect of STP proposals; and the Designated Officers in
respect of EHTP proposals accord automatic approval if - (a) the items do not attract
compulsory licensing; (b) the location is in conformity with the prescribed parameters;
(c) the export obligation laid down in the respective EHTP scheme or STP scheme is
fulfilled; (d) the unit is amenable to bonding by the Customs, and all the manufacturing
operations are carried out in the same premises and the proposal does not envisage
sending out of the bonded area any raw material or intermediate products for any other
manufacturing or processing activity. All proposals for FDI/NRI/OCB investments in
EHTP/STP units are eligible for approval through AUtomatic Route subject to
parameters listed under para 2.9[For procedure to obtain Automatic Approval, refer to
para 11.2].
Government Approval
6.3 All proposals which do not meet any or all of the parameters for automatic approval
need to be considered and approved by the Government. Also, Government approval for
FDI/NRI/OCB investments under EHTP/ STP need to be obtained through the FIPB in
respect of proposals covered under para 2.9.[For procedure to obtain Government
approval, refer to para 11.3 & 11.4].
PROCEDURES
INDUSTRIAL APPROVALS
Procedure for
IEM / Industrial Licence/ COB Licence
FOREIGN DIRECT INVESTMENT
Procedure For
Automatic/ Govt.(FIPB) Approval
FOREIGN TECHNOLOGY
COLLABORATION
Procedure For
Automatic/ Govt. Approval
100% EXPORT ORIENTED UNITS
Procedure For
Automatic/ Govt. Approval/ foreign direct
investment/NRI investment
UNITS LOCATED IN EPZ/FTZ
Procedure For
Automatic/ Govt. Approval/ foreign direct
investment/ NRI investment
EHTP/STP UNITS
Procedure For
Automatic/ Govt. Approval/ foreign direct
investment/ NRI investment
7.APPROVAL PROCEDURES
The description of activities seeking all industrial approvals including foreign direct
investment are required to be given as per the National Industrial Classification of All
Economic Activities (NIC), 1987, published by the Central Statistical Organisation,
Ministry of Statistics and Programme Implementation, New Delhi. Copies of the
publication can be obtained on payment from Controller of publications, 1 Civil Lines,
Delhi-1 10054 or from any outlet dealing in Government Publications.
7.1 General Procedures
IEM:
(a) All industrial undertakings exempt from the requirements of industrial licensing,
including existing units undertaking substantial expansion, need to file information in
the prescribed Industrial Entrepreneurs Memorandum, i.e. Form IEM (Annexure-VII) .
The form is available at all outlets dealing in Government Publications, Indian
Embassies, the Entrepreneurial Assistance Unit (EAU) of the Secretariat for Industrial
Assistance (SIA), Department of Industrial Policy and Promotion, Udyog Bhavan, New
Delhi-110011, and can also be downloaded from the Web site of the SIA
(http://indmin.nic.in).
(b) The Memorandum (IEM) should be submitted to the EAU of the SIA in person or by
post. A computer acknowledgement containing the SIA Registration Number (for future
reference) will be issued across the counter immediately if delivered in person or sent by
post if received through post. No further approval from SIA is required.
(c) The IEM should be submitted along with a crossed demand draft of Rs.1000/- drawn
in favour of "The Pay & Accounts Officer, Department of Industrial Development,
Ministry of Industry", payable at the State Bank of India, Nirman Bhawan Branch, New
Delhi up to 10 items proposed to be manufactured in the same unit. For more than 10
items, an additional fee of Rs 250 up to 10 additional items needs to be paid through
crossed demand draft.
(d) All Industrial undertakings also need to file information in Part 'B' of the
Memorandum at the time of commencement of commercial production. The prescribed
form is appended to Form IEM. This second Memorandum has also to be filed with the
EAU in SIA, but no fee is required.
(e) No amendment/modifications are made to any IEM filed before 30th June, 1998
except for clerical errors. Where any amendment/modification is sought to be made in
such IEMs, a fresh memorandum in Form IEM, along with the prescribed fee has to be
filed for which a fresh acknowledgement will be issued. An IEM would be
cancelled/deleted from the SIA records if, on scrutiny, it is found that the proposal
contained in the IEM is licensable.
(f) In respect of IEMs filed in the new form made effective from 1st July, 1998,
amendments/modifications will be made on the request of the entrepreneur, as per the
notified procedure.
7.2 Procedural Requirements for Licensed Sectors
Industrial Licence:
(a) All industrial undertakings subject to compulsory industrial licensing are required to
submit an application in the prescribed format, i.e. Form FC-IL(Annexure-VIII).
Licenses are granted under the provisions of the Industries(Development and
Regulation) Act, 1951. The form is available in the EAU of the SIA, at all outlets
dealing in Government Publications, Indian Embassies, and can also be downloaded
from the Web site of the SIA - http://indmin.nic.in.. Applications for the manufacture of
chlorine and caustic soda, along with associated products should include information
regarding the chlorine utilisation programme.
(b) Application in Form FC-IL should be submitted to the EAU of the SIA, Department
of Industrial Policy & Promotion, Ministry of Commerce & Industry, Udyog Bhawan,
New Delhi - 110011. Approvals will normally be available within 4- 6 weeks of filling
the application.
(c) The application, in Form FC-IL, should be submitted along with a crossed demand
draft of Rs.2500/- drawn in favour of the Pay & Accounts Officer, Department of
Industrial Development, Ministry of Industry, payable at the State Bank of India,
Nirman Bhawan, New Delhi.
Carry on Business (COB) Licence
(d) A COB licence is required when a small scale unit exceeds the prescribed small scale
limit of investment in plant and machinery by way of natural growth and continues to
manufacture small scale reserved item(s). Also, if exemption from Industrial licensing
granted for any item is withdrawn, the industrial undertakings who are manufacturing
such item(s) require COB licence. The application for COB licence should be submitted
in prescribed form "EE" to the SIA, Department of Industrial Policy and Promotion,
along with a crossed demand draft of Rs.2500/- drawn in favour of the Pay & Accounts
Officer, Department of Industrial Development, Ministry of Industry, payable at the
State Bank of India, Nirman Bhawan, New Delhi.
8. FOREIGN DIRECT INVESTMENT
8.1 Procedure For Automatic Route
The proposals for approval under the automatic route are to be made to the Reserve
Bank of India in the FC(RBI) form. In a major drive to simplify procedures for foreign
direct investment under the "automatic route", RBI has given permission to Indian
Companies to accept investment under this route without obtaining prior approval from
Reserve Bank of India. However, investors will have to file the required documents with
the concerned Regional Office of the RBI within 30 days after issue of shares to foreign
investors. This facility is available to NRI/OCB investment also.
8.2 Procedure For Government Approval
FIPB
(a) All other proposals for foreign investment, including NRI/OCB investment and
foreign investment in EOU/EPZ/STP/EHTP units, which do not fulfil any or all of the
parameters prescribed for automatic approval, as given in paragraph 2.8, 3.1, and 3.2 are
considered for approval on merits by the Government. All such proposals are considered
for approval by the Foreign Investmetn Promotion Board (FIPB). The FIPB also grants
composite approvals involving foreign technical collaborations and setting up of Export
Oriented Units involving foreign investment/foreign technical collaboration.
(b) Applications to FIPB for approval of foreign investment should be submitted in
Form FC-IL( Annexure-VIII). Plain paper applications carrying all relevant details are
also accepted. No fee is payable. The following information should form part of the
proposal submited to FIPB:
i. Whether the applicant has had or has any previous financial/technical
collaboration or trade mark agreement in India in the same or allied field for
which approval has been sought?; and
ii. If so, details thereof and the justification for proposing the new venture/technical
collaboration (including trade marks).
(c) The application can be submitted with the EAU of the SIA, Department of Industrial
Policy & Promotion, Ministry of Commerce & Industry, Udyog Bhavan, New Delhi -
110011. Applications can also be submitted with Indian Missions abroad who will
forward them to the SIA for further processing.
(d) Foreign investment proposals received in the SIA are placed before the Foreign
Investment Promotion Board (FIPB) within 15 days of its receipt. The Board has the
flexibility of purposeful negotiation with the investors and considers project proposals in
totality in order to ensure optimum foreign direct investment into the country. The
recommendations of FIPB in respect of project proposals involving a total investment of
up to Rs. 6 billion are considered and approved by the Commerce & Industry Minister.
Projects with a total investment exceeding Rs. 6 billion are submitted to the Cabinet
Committee on Economic Affairs (CCEA) for decision.
(e) The decision of the Government in all cases are conveyed by the SIA normally
within 30 days.
(f) RBI has granted general permission under Foreign Exchange Management Act
(FEMA )in respect of proposals approved by the Government. Indian companies getting
foreign investment approval through FIPB route do not require any further clearance
from RBI for the purpose of receiving inward remittance and issue of shares to the
foreign investors. Such companies are, however, required to file the required document
with the concerned Regional Offices of the RBI within 30 days after issue of shares to
the foreign investors.
(g) Similarly, for inward remittance and issue of shares to NRI/OCB up to 100 per cent
equity also, prior permission of RBI is not required. These companies have to file the
required documents with the concerned Regional Offices of RBI within 30 days after the
issue of shares to NRIs/OCBs.
9.FOREIGN TECHNOLOGY COLLABORATION
9.1 Procedure for Automatic Approval
Applications for automatic approval for such foreign technology agreements should be
submitted in Form FT (RBI) with the concerned Regional Offices of Reserve Bank of
India. No fee is payable. Approvals are available within 2 weeks.
9.2 Procedure for Government Approval
(a) All other proposals for foreign technology agreement, not meeting any or all of the
parameters for automatic approval, and all cases of extension of existing foreign
technical collaboration agreement, are considered for approval, on merits, by the
Government. Application in respect of such proposals should be submitted in Form FCIL
to the Secretariat for Industrial Assistance, Department of Industrial Policy &
Promotion, Ministry of Industry, Udyog Bhavan, New Delhi. No fee is payable. The
following information should form part of the proposal submited to SIA:
i. Whether the applicant has had or has any previous financial/technical
collaboration or trade mark agreement in India in the same or allied field for
which approval has been sought?; and
ii. If so, details thereof and the justification for proposing the new venture/technical
collaboration (including trade marks).
Approvals are normally available within 4 to 6 weeks of filing the application.
10. 100% EXPORT ORIENTED UNITS AND UNITS SET UP IN EPZ/FTZ/SEZ
A.PROCEDURE FOR APPROVAL FOR EOUs
10.1 Applications in the prescribed form for 100 per cent E0Us should be submitted to
the Development Commissioners (DCs) of the Export Processing Zones (EPZS)
concerned for automatic approval and to the SIA for Government approval. The Form is
printed in the Handbook of Procedures for Export and Import, 1997-2002 published by
the Ministry of Commerce and is also available at all outlets dealing in Government
Publications. The application should be submitted along with a crossed demand draft of
Rs.5000/- drawn in favour of the "Pay & Accounts Officer, Department of Industrial
Development, Ministry of Industry", payable at the State Bank of India, Nirman Bhavan
Branch, New Delhi.
10.2 Procedure for Automatic Approval for E0Us
Applications in the prescribed form for 100 per cent E0Us should be submitted to the
DCs of the EPZs. Wherever, the proposals meet the criteria for automatic approval, as
given in paragraph 5.2, the DC of the EPZ would issue approval letters within 2 weeks.
10.3 Procedure for Government Approval for E0Us
Proposals not covered by the automatic route shall be forwarded by the DC to the Board
of Approval (BoA) for consideration. On consideration of the proposal by the board, the
decision would normally be conveyed in six weeks.
10.4 Procedure for foreign direct investment/NRI investment
For proposals not covered under automatic route, the applicant should seek separate
approval of the FIPB as per the procedure outlined in para 8.2 above.
B. PROCEDURE FOR APPROVAL FOR UNITS LOCATED IN EPZ/FTZ/SEZ
10.5 Applications for setting up units in EPZs/SEZs be submitted to the concerned DC
of the EPZ/SEZ. The Form is printed in the Handbook of Procedures for Export and
Import, 1997-2002 published by the Ministry of Commerce and is also available at all
outlets dealing in Government Publications. The application should be submitted along
with a crossed demand draft of Rs.5000/- drawn in favour of the "Pay & Accounts
Officer, Department of Industrial Development, Ministry of Industry", payable at the
State Bank of India, Nirman Bhavan Branch, New Delhi.
10.6 Procedure for Automatic Approval for units located in EPZ/FTZ/SEZ
Applications in the prescribed form for 100 per cent E0Us should be submitted to the
DCs of the EPZs/SEZs. Wherever, the proposals meet the criteria for automatic
approval, as given in paragraph 5.2 the DC of the EPZ/SEZ would issue approval letters
within 2 weeks.
10.7 Procedure for Government Approval for units located in EPZ/FTZ/SEZ
Proposals not covered by the automatic route shall be forwarded by the DC to the Board
of Approval (BOA) for consideration. On consideration of the proposal by the Board,
the decision would normally be conveyed in six weeks.
10.8 Procedure for Foreign Direct Investment / NRI Investment
All proposals for FDI/NRI/OCB investment in EPZ/EOU/SEZ are eligible for approvals
under Automatic Route subject to parameters listed in para 2.9. All proposals not
covered under Automatic Route the applicant should seek seperate approval of the FIPB
as per the procedure contained in Para 8.2 above.
11. EHTP/STP UNITS
11.1 Procedure for Approval for EHTP/STP
Application, in the prescribed form, should be submitted to the concerned Directors of
STPs or the Designated Officers of EHTPs for automatic approval, and to the SIA for
Government approval. The application should be submitted along with a crossed
demand draft for Rs. 5000/- drawn in favour of the "Pay & Accounts Offer, Department
of Industrial Development, Ministry of Industry", payable at State Bank of India,
Nirman Bhawan, New Delhi.The form is available in any outlet dealing with
Government Publications.
11.2 Procedure for Automatic Approval for EHTP/STP
Application, in the prescribed form, should be submitted to the concerned Directors of
STPs or the Designated Officers of EHTPs for automatic approval Wherever, the
proposals meet the criteria for automatic approval, as given in paragraph 6.2, the
approval letters are issued within 2 weeks. All other proposals shall be forwarded to the
Inter Ministerial Standing Committee for consideration.
Procedure For Government Approval For EHTP/STP
11.3 Application, in the prescribed form, should be submitted to the Officer designated
by the Ministry of Information Technology for the purpose. Such applications shall be
forwarded by the Officer designated to the Inter Ministerial Standing Committee in the
Ministry of Information Technology for consideration. On consideration by the Inter
Ministerial Standing Committee, a decision would be normally conveyed within six
weeks.
PROCEDURE FOR FOREIGN DIRECT INVESTMENT / NRI INVESTMENT
11.4 All proposals for FDI/NRI/OCB investment in EHTP/STP Units are eligible for
approval under Automatic Route subject to parameters listed in para 2.9. For proposals
not covered under Automatic Route, the applicant should seek separate approval of the
FIPB, as per the procedure outlined in para 8.2 above.
Procedure for Foreign Direct Investment in Industrial Park
11.5 As 100% FDI is permitted under automatic route for setting up of Industrial Park,
the procedure mentioned in para 8.1 will be applicable for seeking requisite approval.
Procedure for availing Income Tax benefit for the Industrial Park
11.6 For availing 100% tax exemption available under Section 80 IA of the Income Tax
Act, 1961, for setting up operating, operating and maintenance of Industrial Park,
proposal has to be submitted in IPS-I form, available on this Department's website, to
the Secretariat for Industrial Assistance. The proposals which meet the specified criteria
(Please refer to Industrial Park Notification, 2002 available on the Department's website)
are approved under automatic route. Otherwise, they are considered under nonautomatic
route by an Empowered Committee. Application for automatic approval has
to be submitted in duplicate and for non-automatic approval in six sets. The proposal in
IPS-I form has to be accompanied with a Demand Draft of Rs 6000/- drawn in favour of
"Pay & Accounts Officer, Department of Industrial Development" payable at State Bank
of India, Nirman Bhavan Branch, New Delhi.
FACILITATION
INVESTMENT PROMOTION AND
FACILITATION
Foreign Investment Promotion Board
(FIPB)
FOREIGN INVESTMENT PROMOTION
COUNCIL (FIPC)
Foreign Investment Implementation
Authority
SECRETARIAT FOR INDUSTRIAL
ASSISTANCE (SIA)
SIA's Promotional Activities
Entrepreneurial Assistance Unit (EAU) of
the SIA Investment Promotion and
Infrastructure Development (IP & ID) Cell
Project Monitoring Wing/
INTERNATIONAL CENTRE FOR
ALTERNATIVE DISPUTE
RESOLUTION
PUBLICATIONS
SIA Newsletter SIA Statistics Other
Publications
FOCUS WINDOWS NODAL OFFICERS
SIA WEBSITE
SUBMISSION OF MONTHLY
PRODUCTION RETURNS
PROCEDURE FOR OTHER
ENVIRONMENTAL CLEARENCES
INFORMATION ON EXPORTS AND
IMPORTS
EXTERNAL COMMERCIAL
BORROWINGS
COMPANY REGISTRATION
GRIEVANCES AND COMPLAINTS
Business Ombudsperson Grievances
Officer & Joint Secretary
CITIZENS CHARTER
12. INVESTMENT PROMOTION AND FACILITATION
12.1 Foreign Investment Promotion Board (FIPB)
The Government has revamped the FIPB and transferred it to the Industry Ministry. The
FIPB is the nodal, single window agency for all matters relating to FDI as well as
promoting investment into the country. It is chaired by Secretary, Industry (Department
of Industrial Policy and Promotion). Its objective is to promote FDI into India:-
[i] by undertaking investment promotion activities in India and abroad,
[ii] facilitating investment in the country by international companies, non-resident
Indians and other foreign investors,
[iii] through purposeful negotiation/discussion with potential investors,
[iv] early clearance of proposals submitted to it, and
[v] review policy and put in place appropriate institutional arrangements, transparent
rules and procedures and guidelines for investment promotion and approvals.
12.2 After its revamping, the FIPB has played a proactive role in promoting and
attracting FDI into the country and further facilitating expeditious clearance to the
proposals submitted to it. The FIPB has also decided to monitor implementation of mega
projects to further facilitate investment and remove bottlenecks and as part of this
exercise, to get studies commissioned through professional bodies and undertake other
promotional measures.
12.3 Mailbox facility for filing of proposals for FIPB
A mailbox facility is available on the SIA website in the name of
[email protected] for filing applications for FIPB.
13 FOREIGN INVESTMENT IMPLEMENTATION AUTHORITY (FIIA)
Government has set up the Foreign Investment Implementation Authority (FIIA) in the
Ministry of Commerce & Industry. The FIIA will facilitate quick translation of Foreign
Director Investment (FDI) approvals into implementations, provide a pro-active one stop
after care service to foreign investors by helping them obtain necessary approvals, sort
out operational problems and meet with various Government Agencies to find solutions
to problems and maximising opportunities through a partnership approach.
13.2 Role
The FIIA shall take steps to:
Understand and address concerns of investors;
Understand and address concerns of approving authorities;
Initiate multi agency consultations; and
Refer matters not resolved at the FIIA level to high levels on a quarterly
basis, including cases of projects slippage on account of implementation
bottlenecks.
13.3Functions
The functions of the FIIA shall be as under:
Expediting various approvals/permissions;
Fostering partnership between investors and government agencies
concerned;
Resolve difference in perceptions;
Enhance overall credibility;
Review policy framework; and
Liaise with the Ministry of External Affairs for keeping India's
diplomatic missions abroad informed about translation of FDI approvals
into actual investment and implementation.
13.4 The modalities of functioning of FIIA shall be as under:
i. The FIIA shall set up a Fast Track Committee (FTC) to review and
monitor mega projects. It will nominate members of the FTC from
representatives of various Ministries/agencies/State Government at the
working level. The representative of the AM concerned shall act as the
project coordinator and shall head the FTC. The FTC shall prescribe the
time frame within which various approvals/permissions are to be given
on a project to project basis. FTC shall also flag issues that need to be
resolved by FIIA. Based on the inputs provided by FTC, the FIIA will
give its recommendations on each project on the basis of which
Administrative Ministries/State Government shall take action under
their own laws and regulations.
ii. The FIIA will initiate inter Ministerial consultations and make
appropriate recommendations to the competent authority, i.e.
Ministry/Department concerned at the Central Government level and
the State Government, as the case may be, on issues requiring policy
intervention.
iii.The FIIA will act as a single point interface between the investor and
Government agencies including Administrative Ministries/State
Governments/Pollution Control Board/DGFT/Regulatory
Authorities/Tax Authorities/Company Law Board, etc.
iv.The FIIA shall meet once every month to review cases involving
investment of Rs. 100 crore or more, consider references received from
the FTC, and monitor the functioning of various FTCs. It would also
entertain any complaint regarding implementation bottlenecks from FDI
approval holders regardless of the quantum of investment.
v. The FIIA shall also make recommendations from time to time on any
issue relating to the speedy implementation of FDI projects and also to
provide transparency in government functioning with respect to FDI
projects.
13.5 The Secretariat for Industrial Assistance (SIA) in the Department of
Industrial Policy & Promotion shall function as the Secretariat of the FIIA.
13.6 Approval holders are requested to send their suggestions and problems, if
any to any of the following officers in SIA or at FIIA's e-mail address at
a. Joint Secretary, SIA
Director (FIPB)
Director (FIIA)
Director (100% EOU & NRI Investment)
Director (IP&ID Cell)
Joint Director (IL & TC)
The issues raised are taken up with the concerned Department/authorities and are
discussed in the meeting of FIIA.
14. FOREIGN INVESTMENT PROMOTION COUNCIL (FIPC)
Apart from making the policy framework investor-friendly and transparent,
promotional measures are also taken to attract Foreign Direct Investment into the
country. The Government has constituted a Foreign Investment Promotion
Council (FIPC) in the Ministry of Industry. This comprises professionals from
Industry and Commerce. It has been set up to have a more target oriented
approach toward Foreign Direct Investment promotion. The basic function of the
Council is to identify specific sectors/projects within the country that require
Foreign Direct Investment and target specific regions/countries of the world for its
mobilisation.
15. SECRETARIAT FOR INDUSTRIAL ASSISTANCE (SIA)
15.1 SIA has been set up by the Government of India in the Department of
Industrial Policy and Promotion in the Ministry of Commerce & Industry to
provide a single window for entrepreneurial assistance, investor facilitation,
receiving and processing all applications which require Government approval,
conveying Government decisions on applications filed, assisting entrepreneurs
and investors in setting up projects, (including liaison with other organisations and
State Governments) and in monitoring implementation of projects. It also notifies
all Government Policy relating to investment and technology, and collects and
publishes monthly production data for 213 select industry groups.
15.2 SIA's Promotional Activities
As an investor friendly agency, it provides information and assistance to Indian
and foreign companies in setting up industry and making investments. It guides
prospective entrepreneurs and disseminates information and data on a regular
basis through its two monthly newsletters the "SIA Newsletter" and the "SIA
Statistics" as also through its Website address, i.e. http://indmin.nic.in . It also
assists potential investors in finding joint venture partners and provides complete
information on relevant policies and procedures, including those, which are
specific to sectors and the State Governments.
15.3 Entrepreneurial Assistance Unit (EAU) of the SIA
The Entrepreneurial Assistance Unit functioning under the Secretariat for
Industrial Assistance, Department of Industrial Policy and Promotion provides
assistance to entrepreneurs on various subjects concerning investment decisions.
The unit receives all papers/applications related to industrial approvals and
immediately issues a computerised acknowledgment which also has an
identity/reference number. All correspondence with the SIA should quote this
number. In case of papers filed by post, the acknowledgment will be sent by post.
The Unit extends this facility to all papers/applications relating to IEMs, Industrial
Licences, Foreign Investment, Foreign Technology Agreements, 100 per cent
EOUs, EHTP, STP Schemes, etc.
15.4 The Unit also attends to enquiries from entrepreneurs relating to a wide range
of subjects concerning investment decisions. It furnishes clarifications and
arranges meetings with nodal officers in concerned Ministries/Organisations. The
Unit also provides information regarding the current status of applications filled
for various industrial approvals.
15.5 Investment Promotion and Infrastructure Development (IP & ID) Cell
In order to give further impetus to facilitation and monitoring of investment, as
well as for better coordination of infrastructural requirements for industry, a new
cell called the "Investment Promotion and Infrastructure Development Cell" has
been created. The functions of the Cell include:-
[a] Dissemination of information about investment climate in India;
[b] Investment facilitation;
[c] Developing and distributing multimedia presentation material and other
publications;
[d] Organising Symposiums, Seminars, etc. on investment promotion;
[e] Liaison with State Governments regarding investment promotion;
[f] Documentation of single window systems followed by various States;
[g] Match-making service for investment promotion;
[h] Coordination of progress of infrastructure sectors approved for
investment/technology transfer, power, telecom, ports, roads, etc.;
[i] Facilitating Industrial Model Town Projects, and Industrial Parks, etc.;
[j] Promotion of Private Investment including Foreign Investment in the
infrastructure sector;
[k] Compilation of sectoral policies, strategies and guidelines of infrastructure
sectors, both in India and abroad; and
[l] Facilitating preparation of a perspective plan on infrastructure requirements for
industry.
15.6 Project Monitoring Wing
Project Monitoring Wing , created within the IP&ID Cell in June 1998, has now
been functioning under Foreign Investment Implementation Authority Section
with effect from 27.7.2001. The functions of the Project Monitoring Wing are as
follows:
(i) Coordination with Central and State level Ministries/Departments concerned
and related agencies for tracking and monitoring approved projects, and
compilation and analyses such information;
(ii) Direct contact, wherever necessary, with entrepreneurs and updation of the
information on projects, and provision of necessary assistance.
16. NODAL OFFICERS
16.1 The Department of Industrial Policy and Promotion has identified officers at
the Deputy Secretary/Director level as Nodal officers for facilitation of all matters
relating to the industrial projects pertaining to a State. For large projects involving
sizeable amount of FDI, officers have been identified in the Department of
Industrial Policy and Promotion and other departments concerned (e.g. the
Ministry to which the investment proposal pertains) and the State Government to
act as contact officers so that these projects can be implemented within the time
schedule. The officers of the Project Monitoring Wing are in touch with the
contact officers.
17. FOCUS WINDOWS
17.1 The Department of Industrial Policy and Promotion also has opened Country
Focus Windows for countries with sizeable investment interest in India. At
present, the Focus Window cover countries such as USA, Germany, France,
Switzerland, UK, Australia, Japan and Korea. For each focus window a senior
officer in the Department provides facilitation and assistance.
18. INTERNATIONAL CENTRE FOR ALTERNATIVE DISPUTE
RESOLUTION
International Centre for Alternative Dispute Resolution (ICADR) has been
established as an autonomous organization under the aegis of Ministry of Law,
Justice and Company Affairs to promote settlement of domestic and international
disputes by different modes of alternate dispute resolution. ICADR has its
headquarters in New Delhi and has regional office in Lucknow and Hyderabad.
More information on ICADR can be obtained from the website:
http://www.icadr.org
19. PUBLICATIONS
19.1 SIA Newsletter
This is a monthly publication and covers information on data relating to Foreign
Direct Investment, NRI investment, sectoral break-ups, countrywise break-up, all
approvals accorded for Foreign Direct Investment, and NRI investment during the
month, FDI inflows, and policy notifications issued during the month. Annual
issues of SIA Newsletter for 1999 and 2000 have been officially released and is
now available and can be obtained on payment from Controller of Publications, 1
civil lines, Delhi - 110 054 or from any outlet dealing in Government
publications.
19.2 SIA Statistics
This is also a monthly publication which contains data relating to Industrial
Licences, approvals granted for setting up 100 per cent Export Oriented Units,
details of approvals for Industrial Licences, EOUs, Foreign Technical
Collaboration etc., monthly data on industrial production of 209 select industry
groups, as well as policy announcements by Government during the month.
Annual issues of SIA Statistics have been officially released and is now available
and can be obtained on payment from Controller of Publications, 1 civil lines,
Delhi - 110 054 or from any outlet
in Government publications..
19.3 Other Publications
These publications include this Manual as well as sector specific publications,
such as on the Indian Automobile industry, Cement industry, Engineering
industries, Leather industries, etc. A set of publications relating to the
Infrastructure sector with specific volumes on Ports, Roads, Power, Telecom, and
Railways is also published. Other publications include information on Current
taxation and duty structure, Entry options for business in India, and the like. A
comprehensive publication 'India Investment Guide' has recently been published.
All or any of these publications are available through the EAU of the SIA, the
Investment Promotion and Infrastructure Development Cell, as also Indian
Missions abroad. These can also be down loaded from the SIA Website.
20. SIA WEBSITE http://dipp.nic.in
20.1 A new website (http://dipp.nic.in) of the Department of Industrial Policy &
Promotion has been recently launched. The Home page of the website has been
created with the intention to convey information relating to the investment climate
in India and contains the ready reckoner on investing in India, Manual on
Industrial Policy & Procedures, other publications, State industrial policies,
forthcoming promotional events, projects on offer, investment opportunity in
selected sectors, profile of industries looked after by the Department, FIPB
application status, downloadable forms, etc.. The Japanese, German, French,
Italian & Spanish Versions of the Manual are also available on the website. The
earlier website of SIA is now available at http://siadipp.nic.in .
20.2 On line advisory services through Chat Room/Bulletin Board are available
during prescribed hours on Internet through SIA website. Assistance for drafting
and filing of all application with SIA is also provided.
20.3 SIA website is hyperlinked to the website of all Ministries/Department(s) of
the Central Government as well as State Governments, Banks, Financial
Institutions and Industry associations.
21. SUBMISSION OF MONTHLY PRODUCTION RETURN
Top Related