DIVIDER INSERT HERE:
Tension Rod Systems
tension rod systems
tensio
n ro
dsystem
s
77Online catalogue: www.anzor.co.nz/arch
TENSION ROD SYSTEMS
TENSION ROD SYSTEMS
ROD DYNaMIc `HIDDEN THREaD’ - STaINLESS STEEL
P2H aDjuSTER & ROD - STaINLESS STEEL
SRS-560 HIgH TENSILE aDjuSTER & HIgH TENSILE ROD - STaINLESS STEEL
PagE 85
PagE 78
PagE 87
Information used exclusively under permission of Strudyna Co. Ltd
cOuPLINg PLaTES - STaINLESS STEEL PagE 83
Online catalogue: www.anzor.co.nz/tension-rod
fORk + ROD TENSION SYSTEM - gaLVaNIZED PagE 89
This is our standard stainless steel Tension Rod System.
78
ROD DYNaMIc `HIDDEN THREaDS’
BNZ Tower - WellingtonInternal Rod Supports for BridgesContractor: Thermosash Commercial Ltd
Subway - Lunn Ave, Auckland Rod Bracing CanopyContractor: J & R Slecht Ltd
New Lynn Railway Station - AucklandInternal Structure Support
Contractor: Grayson Engineering Ltd
Online catalogue: www.anzor.co.nz/tension-rod
Sovereign House - Smales Farm, Auckland Rod Bracing for Sun ScreenContractor: Thermosash Commercial Ltd
79Online catalogue: www.anzor.co.nz/arch
ROD DYNaMIc `HIDDEN THREaDS’
ROD DYNaMIc `HIDDEN THREaD’STaINLESS STEEL TIE RODS
Locking nut covers threadsADJUSTABLE EYE (LH)
SPANNER FLATS
ROD JOINER
ADJUSTABLE FORK - (RH)
ADJUSTABLE FORK (LH)
ADJUSTABLE EYE (RH)
fEaTuRES & BENEfITS
• Attractive look as the threads are hidden by the locking nut.
• Exposed threads can commonly trap corrosive agents (e.g. salt) and therefore tea-stain more
easily. By covering the threads it removes this risk and enhances the long-term appearance.
• Fork and Eye terminals are made from 316 Stainless Steel which is then passivated for
enhanced corrosion resistance. These are made by the highly reputable manufacturer of
structural stainless steel components `Structural Dynamics’.
• Fork and Eye terminals each have a laser engraved code for traceability from raw material.
• The Tie Rods are 316 Stainless Steel.
• UNF threads allow for more precise adjustment.
• Fully tested with Tensile & Yield loads available.
WHY SPEcIfY?
• We have excellent stock levels of all fittings in New Zealand, so our delivery is quick.
• Rod length is customised to the job - machined locally to order with a short delivery time.
• Competitively priced.
• We are proven in New Zealand, and are the preferred supplier to many structural steel
companies, having supplied many projects nationwide.
Adjust by turning the extended tension rod and joiner as one single unit.
RH
LH
RH
LH
Adjust by turning the rod only.
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
EX-STOck SuBjEcT TO PRIOR
SaLE
80
ROD DYNaMIc `HIDDEN THREaDS’
aDjuSTaBLE fORkS - LEfT (S912L) & RIgHT HaND (S912R)
Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.
ROD LENgTHS
EX-STOck
SuBjEcT
TO PRIOR
SaLE
Information used exclusively under permission of Strudyna Co. Ltd
D
M
A
B
L
MProduct Code: ASDS912
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
LOcTITE 243
LaRgE qTY
TO ORDER
Delivery approx
2 months
SMaLL qTY
TO ORDER
Delivery approx
2-3 weeks
Size M uNf
a (mm)
B (mm)
ØD (mm)
L (mm)
adjustment (+/-)
Yield Load* (kN)
Tensile Load (kN)
1/4” UNF 7 11 6.4 68.5 15mm 7.0 14.6
5/16” UNF 8.5 13.2 7.9 80 16mm 11.6 23.3
3/8” UNF 10 18 9.5 97 19mm 12.9 30.6
1/2” UNF 14 24 12.7 137 30mm 24.6 58.2
5/8” UNF 18 30 16 170 35mm 33.8 85.0
3/4” UNF 22 38 19 212 45mm 49.4 124.1
7/8” UNF 24 45 22 244 50mm 67.2 168.9
1” UNF 26 50 25.5 282 60mm 87.7 220.4
1-1/4” UNF 32 64 31.8 330 65mm 141.9 356.4
Size M Metric
a (mm)
B (mm)
ØD (mm)
L (mm)
adjustment (+/-)
Yield Load* (kN)
Tensile Load(kN)
M27x3.0 28 50 27 264.9 54mm 120.0 236.0
M30x3.5 30 55 30 294.2 60mm 147.0 288.0
M33x3.5 32 60 33 321.6 66mm 181.0 357.0
M36x4.0 34 65 36 350 72mm 214.0 420.0
M39x4.0 36 70 39 378 78mm 255.0 502.0
M42x4.5 39 75 42 408 84mm 293.0 577.0
M45x4.5 42 78 45 432.7 90mm 342.0 672.0
M48x5.0 45 82 48 460 96mm 385.0 758.0
M52x5.0 49 88 52 498.1 104mm 460.0 905.0
M56x5.5 52 92 56 530.9 112mm 531.0 1,045.0
Online catalogue: www.anzor.co.nz/tension-rod
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
THREaDS MuST BE LuBRIcaTED WITH NIckEL aNTI SEIZE TO aVOID gaLLINg.
81
Size a (mm)
B (mm)
ØD (mm)
L (mm)
adjustment (+/-)
Yield Load* (kN)
Tensile Load (kN)
1/4” UNF 6 11 6.7 68.5 15mm 7.0 14.6
5/16” UNF 8 13.2 8.3 80 16mm 11.6 23.3
3/8” UNF 9 18 9.8 97 19mm 12.9 30.6
1/2” UNF 12 24 13 137 30mm 24.6 58.2
5/8” UNF 16 30 16.2 170 35mm 33.8 85.0
3/4” UNF 20 38 19.5 212 45mm 49.4 124.1
7/8” UNF 22 45 22.5 244 50mm 67.2 168.9
1” UNF 24 53 25.7 282 60mm 87.7 220.4
1-1/4” UNF 30 66 32 330 65mm 141.9 356.4
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
aDjuSTaBLE EYES - LEfT (S911L) & RIgHT HaND (S911R)
B
D
A
L
ROD DYNaMIc `HIDDEN THREaDS’
RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulationRDS curtain wall joiner with movable articulation RDS curtain wall joiner with fixed articulation
aLSO aVaILaBLE
Product Code: ASDS911
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
for installation guide and technical specificationsplease contact us or visit www.anzor.co.nz/arch/tension-rod
Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.
ROD LENgTHSTHREaDS MuST BE LuBRIcaTED WITH NIckEL aNTI SEIZE TO aVOID gaLLINg.
EX-STOck SuBjEcT TO PRIOR
SaLE
82
PIN, WaSHER & ScREW DIMENIONS
Size (M) D L
1/4” UNF Ø6.4 14mm
5/16” UNF Ø7.9 17.5mm
3/8” UNF Ø9.5 19.5mm
1/2” UNF Ø12.7 26.4mm
5/8” UNF Ø16 34.5mm
3/4” UNF Ø19 41.5mm
7/8” UNF Ø22 46.5mm
1” UNF Ø25.5 54.5mm
1-1/4” UNF Ø31.8 65mm
ROD jOINER to connect rods for lengths beyond 6 metres
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
LOcTITE 243
ROD DYNaMIc `HIDDEN THREaDS’
Size ØD1 (mm)
ØD2 (mm)
ØD3 (mm)
ØT1 (mm)
ØT2 (mm)
1/4” 9.0 7.0 14 4.5 6.5
5/16” 10.5 8.5 16 6.0 8.0
3/8” 12.0 10.0 18 7.5 9.5
1/2” 15.5 13.5 25 11.5 13.5
5/8” 20.5 16.5 32 15.0 17.0
3/4” 23.5 19.5 36 19.0 21.0
7/8” 27.0 23.0 45 19.0 23.0
1” 30.5 26.5 50 21.0 25.0
1.1/4” 37.0 33.0 60 27.0 31.0
ISOLaTINg WaSHERTo be used to separate dissimilar metals such as when attaching
a stainless steel adjustable fork to a mild steel galvanized bracket. Thereby avoiding galvanic corrosion between dissimilar metals.
D3
D2
T1
T2
D1
D
L
M
L
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
EX-STOck SuBjEcT TO PRIOR
SaLE
EX-STOck SuBjEcT TO PRIOR
SaLE
Size (M)
L (mm)
1/4” UNF 24
5/16” UNF 32
3/8” UNF 38
1/2” UNF 50
5/8” UNF 60
3/4” UNF 72
7/8” UNF 83
1” UNF 90
1-1/4” UNF 112
83Online catalogue: www.anzor.co.nz/arch
ROD DYNaMIc TIE Back PLaTES - 316 STaINLESS STEEL
Sca1
ScB1 - Bolt anchor Designed for J Bolts directly onto steel beam.
angles available ex-stock: 60° available to order:
45,50,55,65,70,75,80,85,90°
Size ØD(mm)
H(mm)
L(mm)
L1(mm)
T(mm)
1/4” 9.5 18 20-60 11 5
5/16” 11.0 21 25-75 13 6
3/8” 12.5 24 30-70 16 8
1/2” 16.5 33 40-100 22 10
5/8” 21.0 45 50-110 28 14
3/4” 24.0 45 60-120 35 18
7/8” 28.0 70 60-140 38 19
1” 31.5 90 75-155 45 20
1-1/4” 38.0 105 85-185 55 25
Scc1- chemical Bolt anchor Designed for chemical anchors directly onto cement.
angles available ex-stock: 45°
ScD1 - chemical Bolt anchor Designed for chemical anchors directly onto concrete.
angles available ex-stock: 90° available to order:
30,40,45,50,55,60,65,70,75
for full dimensions, please contact us or visitwww.anzor.co.nz/arch
Product code: ASDCPC1Product code: ASDCPD1Product code: ASDCPB1
Always install rods and brackets in line.
Welding coupling plates.SCA1 are designed to becut and welded on site.
Welded application
cOuPLINg PLaTES
aVaILaBLE
TO ORDER
Delivery approx
2 weeks
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
NB: Breaking Loads for SCB1, SCD1 & SCC1 are indicative of coupling’s plate tensile performance against rod assemblies, and not the anchoring strength of bolts against wall/floor.
EX-STOck SuBjEcT TO PRIOR
SaLE
EX-STOck SuBjEcT TO PRIOR
SaLE
EX-STOck SuBjEcT TO PRIOR
SaLE
84
for cross Bracing
Scf1
Angles available: 40,45,50,55,60,65,70,75,80,85,90
Scg1
Angles available: 120°
cOuPLINg PLaTES - 316 STaINLESS STEEL
Size ØD(mm)
ØD1(mm)
T(mm)
1/4” 65 6.7 6
5/16” 80 8.2 6
3/8” 90 9.8 8
1/2” 115 13.3 12
5/8” 140 16.5 16
3/4” 170 20.0 19
7/8” 190 23.0 22
1” 220 26.0 22
1-1/4” 260 33.0 30
Copyright © 2011 Strudyna
40° 45° 50° 55° 60°
65° 70° 75° 80° 85°
90°
T
D1
D
40°
D1
D
45°
D1
D
50°
D1
D
60°
D1
D65°
D1
D
80°
D1
D
85°
D1
D
55°
D1
D
70°
D1
D
75°
D1
D
T120°
120°
D1
D90
°
T
D1
D
40°
D1
D
45°
D1
D
50°
D1
D
60°
D1
D
65°
D1
D
80°
D1
D
85°
D1
D
55°D1
D
70°
D1
D
75°
D1
D
T120°
120°
D1
D
90°
90°
T
D1
D
40°
D1
D
45°
D1
D
50°
D1
D
60°
D1
D
65°
D1
D
80°
D1
D85
°
D1
D
55°
D1
D
70°
D1
D
75°
D1
D
T120°
120°
D1
D
90°
T
D1
D
40°
D1
D
45°
D1
D
50°
D1
D
60°
D1
D
65°
D1
D
80°
D1
D
85°
D1
D
55°
D1
D
70°
D1
D
75°
D1
D
T120°
120°
D1
D
90°
T
D1
D
40°
D1
D45°
D1
D
50°
D1
D
60°
D1
D
65°
D1
D
80°
D1
D
85°
D1
D
55°
D1
D
70°
D1
D75
°
D1
D
T120°
120°
D1
D
cOuPLINg PLaTES
aVaILaBLE
TO ORDER
Delivery approx
2 weeks
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
Size ØD(mm)
ØD1(mm)
T(mm)
1/4” 65 6.7 6
5/16” 80 8.2 6
3/8” 90 9.8 8
1/2” 115 13.3 12
5/8” 140 16.5 16
3/4” 170 20.0 19
7/8” 190 23.0 22
1” 220 26.0 22
1-1/4” 260 33.0 30
85Online catalogue: www.anzor.co.nz/tension-rod
a `HIgH END’ aRcHITEcTuRaLLY DESIgNED
ROD aDjuSTER.
• A high quality tensioning unit for rod (and cable – see p.101).
• Designed for performance and also aesthetic appeal.
• Due to its unique internal adjustment system, it can be adjusted individually by turning just one adjuster end, without having to turn the entire rod.
• The double locking nut system offers good security to counter external dynamic and resonance forces.
• Threads are hidden for enhanced aesthetic appeal.
P2H aDjuSTER - aRcHITEcTuRaLLY DESIgNED STaINLESS STEEL TERMINaLS fOR TIE RODS
aVaILaBLE
TO ORDER
Delivery approx
4 months
P2H adjuster Technical features• Rod diameter: Metric M16 – M56.
• Made from passivated 316 Stainless
Steel for enhanced corrosion resistance.
• finish: Matte
• Installation - special P2H tools required.
PIN
P2H - Fork
Lock Nut for Ex-socket
Lock Nut forIn-Socket
Copyright © 2011 Strudyna Information used exclusively under permission of Strudyna Co. Ltd
P2H aDjuSTER
THREaDS MuST BE LuBRIcaTED WITH NIckEL aNTI SEIZE TO PREVENT gaLLINg
Adjust by turning the “In-Socket” only.
RH
86
P2H aDjuSTER - performance data
Rod Size (Ø)
a(mm)
ØD(mm)
adjustment+/-
Yield Load* (kN)
Tensile Load(kN)
M16 18 16 40mm 40 80
M20 20 20 40mm 67 132
M22 20 22 40mm 79 163
M24 21 24 56mm 100 197
M27 24 27 56mm 126 254
M33 30 33 60mm 199 391
M42 34 42 64mm 314 620
M45 40 45 64mm 365 718
M52 40 52 70mm 485 978
M56 48 56 80mm 514 1,143
P2H Precautions
• Always select the correct rod system based on load requirements.
• Do not overload the rod above its designed safe working load.
• Always use the P2H Adjuster in line with its anchoring point.
• Never use the P2H adjuster for lifting purposes.
for installation guide, tools and technical specificationsplease contact one of our architectural product managers
or visit www.anzor.co.nz/arch/p2h
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
LOcTITE 243
P2H aDjuSTER
P2H (Fork) P2H (Fork)
ØD
A
Pin-to-Pin Middle adjustment
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
THREaDS MuST BE LuBRIcaTED WITH NIckEL aNTI SEIZETO PREVENT gaLLINg
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
87Online catalogue: www.anzor.co.nz/arch
fEaTuRES
• High tensile Stainless Steel Rod Tension System.
• Designed for performance and also aesthetic appeal.
• Threads are hidden for enhanced aesthetic appeal.
• Full traceability - rods and tensioners each come with laser engraved codes.
SRS Technical features
• Rod Diameter: Metric M16 – M100.
• fork Material: Cast 2205 Duplex Stainless Steel
• Rod Material: 560HTR Grade High Tensile Stainless Steel
• Lock Nut Material: Cast AISI316
• Pin Material: Rod 17-4 PH Stainless Steel
• Surface Treatment: M16 – M45 Matte finish
M56 – M100 Gloss finish
Copyright © 2011 Strudyna
SRS - HIgH TENSILE STaINLESS ROD
SRS fork
Adjust by turning the rod only.
RH
LH
SRS-560HTR - HIgH TENSILESTaINLESS STEEL ROD SYSTEM
Online catalogue: www.anzor.co.nz/tension-rod
Information used exclusively under permission of Strudyna Co. Ltd
THREaDS MuST BE LuBRIcaTED WITH NIckEL aNTI SEIZETO PREVENT gaLLINg
aVaILaBLE
TO ORDER
Delivery approx
4 months
88
SRS PERfORMaNcE DaTa
Rod Size (Ø)
a(mm)
ØD(mm)
adjustment+/-
Yield Load* (kN)
Tensile Load (kN)
M16 16 16 32mm 109 137
M20 20 20 40mm 171 214
M22 22 22 44mm 169 243
M24 24 25 48mm 197 283
M30 26 30 46mm 288 364
M33 30 33 50mm 357 451
M36 34 36 54mm 420 531
M39 36 39 60mm 502 634
M42 40 42 64mm 577 728
M45 42 45 68mm 672 848
M48 45 48 72mm 758 957
M52 50 52 78mm 905 1,142
M56 50 56 84mm 933 1,258
M60 55 30 70mm 1,086 1,464
M64 56 34 60mm 1,231 1,659
M68 61 68 60mm 1,405 1,894
M72 66 72 60mm 1,593 2,147
M76 72 76 50mm 1,788 2,411
M80 72 80 50mm 1,998 2,693
M85 76 85 50mm 2,275 3,067
M90 82 90 50mm 2,571 3,465
M100 88 100 50mm 3,220 4,340
*Design load: standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105.
NB: never use rod for lifting purposes.
Pin to PinMiddle adjustment
min max
RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulationRDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation
RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation
aVaILaBLE
TO ORDER
Delivery approx
4 months
SRS 560HTR with 4 way connector plate.
SRS 560HTR with a perpendicular T-Joiner.SRS 560HTR with 3 way connector plate.
SRS - HIgH TENSILE STaINLESS ROD
accESSORIES
ØD
A
Pin-to-Pin Middle adjustment
560HTR RodSRS (fork)SRS (fork)
Ø Rod
Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod
89
Rod Size (Ø)
a(mm)
ØD(mm)
adjustment+/- (mm)
Yield Load (kN)
M10 10 10 14 26.3
M12 12 11 12 38.3
M16 15 15 23 71.2
M20 18 17 29 111.0
M24 23 23 35 160.0
M27 23 25 40 208.0
M30 28 29 43 254.0
M36 28 33 52 371.0
M42 33 37 61 509.0
M48 38 41 68 669.0
M52 43 46 75 798.0
M56 43 51 82 922.0
M60 48 56 85 1,073.0
M64 53 56 89 1,215.0
M70 58 61 101 1,463.0
M80 68 71 116 1,910.0
M90 78 80 128 2,418.0
M100 83 90 141 2,985.0
ØD
Pin-to-Pin Middle adjustment
Galv Fork
for full technical specifications & installation guide please contact one of our architectural product managers.
Galv Fork
Ø Rod
A
• Produced by a high quality European manufacturer.
• Supplied to thousands of projects worldwide.
• Designed for performance and also aesthetic appeal.
• An economical, high quality choice for your next rod tensioning project.
gaLVaNIZED ROD SYSTEM
Yield Stress of 460 N/mm2 equal to 460 MPa
Rod Joiner (sold separately)
Galv Rod
gaLVaNIZED fORk + ROD TENSION SYSTEM
Fork size M24 and smaller and a quantity of up to 10 rods.Delivery approx 10 working days
SMaLL ORDERS
Size and qty on application.
Please contact us for estimated delivery times.
LaRgE ORDERS
ROD jOINERS
Available on request. (sold separately)
aVaILaBLE TO ORDERDELIVERY TIMES:
NB: illustrations are not an exact representation of the product.Please contact us for technical drawings.
ØD = the hole diameter in the fork that accommodates the clevis pin
Locking Nut
Online catalogue: www.anzor.co.nz/tension-rod
Top Related