Stabilisation
26-1-2015Stabilisation the heat is on
A high quality Waste Heat Boiler. Two levels.
Optimal heat emission. Done in a jiffy.
• Crude oil often contains dissolved gasses such
as sulphur (H2S) and other gaseous
compounds.
• H2S may corrode storage tanks and the
gaseous substances could even cause them to
explode.
• Therefore, it is essential to stabilise crude oil
first.
• The pressure on the crude oil is reduced and
subsequently the gaseous compounds are
removed in a distillation column.
• The heat required for this process comes from
a reboiler.
• The gaseous mixture that is released can than
be treated further in several ways.
• One option is to burn the mixture and use the
heat to produce steam via waste heat boilers.
• By cooling the combustion gases, it is also
possible to recover the sulphur in the oil in its
solid form.
Stabilisation
26-1-2015Stabilisation the heat is on
A high quality Waste Heat Boiler. Two levels.
Optimal heat emission. Done in a jiffy.
• Crude oil often contains dissolved gasses such
as sulphur (H2S) and other gaseous
compounds.
• H2S may corrode storage tanks and the
gaseous substances could even cause them to
explode.
• Therefore, it is essential to stabilise crude oil
first.
• The pressure on the crude oil is reduced and
subsequently the gaseous compounds are
removed in a distillation column.
• The heat required for this process comes from
a reboiler.
• The gaseous mixture that is released can than
be treated further in several ways.
• One option is to burn the mixture and use the
heat to produce steam via waste heat boilers.
• By cooling the combustion gases, it is also
possible to recover the sulphur in the oil in its
solid form.
Stabilisation: Case Study
26-1-2015Stabilisation the heat is on
Challenge / question
• A client is looking for a special waste heat boiler.
• He would like to use the heat of the combustion gases at a
temperature of 1.200°C.
• The heat must be absorbed in two steps.
• The first step is at a high level where intense cooling of the
tubes must be guaranteed.
• The inlet of the tubes must also be resistant to the high
temperatures.
• In the second step, the hot gasses cool down further to a
lower level where the temperatures on the tube side are less
critical.
Stabilisation: Case Study
26-1-2015Stabilisation the heat is on
Our solution
• To absorb the heat at a high level in the first step,
we use a thermosiphon reboiler which guarantees
extreme cooling of the tubes.
• The clever use of a separator drum placed above
the steamer guarantees a homogenous flow and
temperature around the tubes via several risers
and downcomers.
• The cooling down of the hot flow in the second
step is done by using a standard kettle reboiler.
• The conditioned internal recirculation of this kettle
provides optimal cooling of the hot gasflow.
Stabilisation• Stabilisation is related to the following products:
• Waste Heat Boiler High Temperature: http://www.bronswerk.com/en/Waste-Heat-Boiler-High-
Temperature/PT92/
• Waste Heat Boiler: http://www.bronswerk.com/en/Waste-Heat-Boiler/PT90/
• Sulphur condenser: http://www.bronswerk.com/en/Sulphur-Condenser/PT84/
• Separator: http://www.bronswerk.com/en/Separator/PT78/
• Reboiler: http://www.bronswerk.com/en/Reboiler/PT70/
• Condenser: http://www.bronswerk.com/en/Condenser/PT50/
• Air Cooled Cooler: http://www.bronswerk.com/en/Air-Cooled-Cooler/PT6/
26-1-2015Stabilisation the heat is on
Stabilisation
• Interested?
• Read more about our solutions for the oil industry
• http://www.bronswerk.com/en/Oil-Extraction/PS2/
• http://www.bronswerk.com/en/Oil-Refinery/PS59/
• http://www.bronswerk.com/en/Hydro-Crackers/PS60/
26-1-2015Stabilisation the heat is on
Stabilisation
• Can we help you with your business?
• Ask our colleague nl.linkedin.com/pub/bram-marcus/11/24b/34b or contact
our company.
26-1-2015Stabilisation the heat is on
Stabilisation
26-1-2015Stabilisation the heat is on
• Like to know more our company?
• Have a chat with Bronswerk people via our website or
• Visit our website: http://www.bronswerk.com/en/Solutions/PS64/
• Meet us on LinkedIn.
• https://www.linkedin.com/company/bronswerk-heat-
transfer/products?trk=top_nav_products
26-1-2015Stabilisation the heat is on
•Join our community!
•Join our community!
• Conversate with us on Facebook.
• http://www.facebook.com/Bronswerk.
Stabilisation the heat is on 26-1-2015
Join our community!
• Follow us on Twitter.
• https://twitter.com/bronswerk
26-1-2015Stabilisation the heat is on
• Share our content?
http://www.slideshare.net/Bronswerk
26-1-2015Stabilisation the heat is on
Join our community!
Top Related