Download - Spartan - Dillon Precision

Transcript

By Duane ThomasSTI’s aptly named Spartan 1911 is intended to

give shooters a custom-quality gun at a price theaverage shooter is actually willing and able tospend. Thus, the Spartan is priced at $660 MSRP. Amajor factor allowing STI to offer this gun at thatprice is that there are no options available. None.You can have a Spartan one way: one finish, oneset of sights, in one caliber, etc. This is in contrastto STI’s other 1911 lines – like the Trojan – inwhich, when ordering, you can spec out exactlythe gun you want. The Spartan is chambered for.45 ACP; it’s available as a full-sized, five-inch bar-reled, carbon steel, single stack, GovernmentModel 1911. Period.

Esthetically, the STI Spartan is a drab gun. Itsfinish is Parkerized, the grips feature seriouslypedestrian grain, the front sighthas an orange fiber opticinsert, and the rear is the Ital-ian LPA adjustable.

The heart of the Spartan .45(what you’re really buying) isthe slide-to-frame-to-barrel fit,and in this area the Spartandelivers. There’s no movementin any of these areas with thegun in battery, either laterally or vertically. STI’sgoal with the Spartan was to provide a customlevel of slide/frame/barrel fit at a non-custom price.I have never before seen a fit like this on anythingbut an expensive custom gun, much less a piece inthe Spartan’s price range.

The slide, frame and barrel are made by Arm-scor in the Philippines. All the other parts (exceptthe LPA sight) are made by STI, which ships themoverseas; the guns are built by Armscor, then sentback to STI. At that point, the Spartans are given toSTI’s quality control people (led by Chris Schirmer)who go over them with a fine-tooth comb. If aproblem is found, typically it’s easier for STI to fix itin-house; Spartans very rarely go back to thePhilippines once they’re here.

The Spartan’sslide is made fromextruded bar stock; theframe is cast. That lastfact does not turn me offthe way it may some tradi-tionalists. What would tell the tale was how theSpartan kept that great fit once I put some roundsthrough it. In my experience, if a 1911 is going toshoot loose, it does so in short order. Even manyguns that seem nicely fitted out-of-the-boxbecome rattletraps once you put a hundredrounds through them. On the other hand, if agun’s still perfectly tight after a hundred rounds,it’s going to be tight for one hell of a long time.

STI’s spec for Spartan trigger pull weight is 4.5 tofive pounds. My sample Spartan’s trigger broke at an

even five pounds, according tomy NRA weight set.

There were only a few areason this gun that might becounted as flaws:

(1) Even given the beavertailgrip safety’s built-up “speedbump,” I still found it quitepossible to hold the Spartan sothe grip safety wouldn’t disen-

gage. Fortunately, any decently skilled pistolsmithknows how to sensitize a grip safety. Actually it’s sosimple that even many non-pistolsmith-trained endusers know how to do the job themselves.

(2) The mag well entrance features those two nicesharp fangs in front so traditional on beveled magwells – famed in song and story for pinching palmflesh painfully between magazine and mag well dur-ing a speed reload, and raising a blood blister. Thegun needs to either be fitted with a mag funnel orhave those flesh manglers radiused into oblivion.

(3) The magazines suck. Eight-rounders made inItaly by ACT-Mag and now sold in the US undervarious companies’ marques, this design has devel-oped a very bad reputation among serious shooters

10

STI’sSpartan .45STI ’sSpartan .45

…continued on Page 64

“The heart of the Spartan .45 is the

slide-to-frame-to-barrel fit”

May 07 Blue Press 1-19 3/16/07 1:23 PM Page 10