The Original!
• NO TARIFF VERSION
Spare parts list 2013
www.dynamicmixers.com
TERMS AND CONDITIONS (General freight and payment terms)Freight charges are not included in prices. Unless indicated, all export shipment terms are EX-WORKS. All shipments, including Franco, are at customers or carriers risks.(art.105 Commerce Code). Freight carrier remains at the discretion of Dynamic, unless when carrier is chosen by the customer. Damage claims must be made within 72 hours from shipment arrival. This price list is effective for year 2013 and it supersedes all previous ones. All invoices will show net prices without any additional discounts. Invoices are payable to Dynamic France, 518 rue léo Baekeland, 85290, Mortagne-sur-Sèvre, France. Prices are subject to change without notice. At the exception of existing company accounts, all orders must be paid before shipment (bank transfer), based on the supplied proforma invoice. For more further please contact us directly.
BANK TRANSFER INFORMATION :Caisse de Crédit Agricole de l'Anjou et du Maine.
IBAN : FR76 1790 6000 3200 0712 6717 248Bank code : 17906Desk code : 00032
Account number : 00071267172Rib Key: 48
BIC/SWIFT : AGRIFRPP879
RETURNS : Returns require prior written or verbal authorization from commercial Head Offi ce. Non-authorized returns, will be sent back to the originator, collect. All returned merchandise are subject to a 10% re-stocking charge. Special items (non standard) are not refundable. Ownership rights. In conformity with Article 65, Code 67-563 modifi ed under article 80-335, dated May 12th 1980, the following fi nal terms will be applied to all orders :1) All faulty payments including partial payments will cancel terms negotiated and make all amounts due, immediately payable to Dynamic France. Furthermore, it is also agreed that all
sold merchandise remain the property of Dynamic France until full payment.
2) All invoices are payable to Dynamic France in Mortagne-sur- Sèvre, any discrepancies will be directly handled by Tribunal du Commerce, Roche-sur-Yon, France.
SPARE PART ORDERS :The following information must be included with all spare part orders :Clear and complete customers information.Machine model number.Machine serial number.Spare part description and catalogue reference number.
UNDER WARRANTY AFTER SALES SERVICE CONDITIONS :Please refer to your nearest service center or contact our com-mercial head offi ce for further information:
Dynamic France - 518 rue léo Baekeland85290 Mortagne Sur Sèvre, France
Phone (33) 2 51 63 02 72Fax (33) 2 51 63 02 73
email : [email protected]
For regular service requests (out of warranty). Defective machines have to be carried into the service center at customers' expenses. In all cases a complete appraisal will be done and returned to the customer, via fax, email or by phone, before any repairs for approval. Labor rate: a standard labor rate of 35.80 € / Hr. will be applicable to all repairs not under warranty. Six month warranty period on service work completed by Dynamic.Appraisal fees of 35,80 € (labor, re-assembling and packaging) will be applied for declined estimates on machines you request to be re-assembled and not repaired.
Conditions
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
WEEE (Directive on Waste Electrical and Electronic Equipment): In so far as
the equipment sold is professional electrical and electronic equipment refer-
red to in Decree 2005-829 of 20 July 2005, transposing Directive 2002/96/EC of
27 January 2003, it is agreed that the buyer in possession of this equipment
shall, in the absence of an agreement to the contrary, be responsible for
fi nancing and organising disposal of waste from this equipment under the
conditions defi ned in Articles 21 and 22 of the said decree. In the event of an
inspection, the constructor may ask the buyer to send documents confi rming
that he has met all the obligations for this equipment transferred to him
by virtue of the contract of sale. If these documents are not sent, it will be
assumed that the customer has failed to carry out the obligations incumbent
on him and the manufacturer reserves the right to ask him for reparation
of any damage he may suffer as a result of this. In accordance with Article
6 of Decree 2005-829 of 20 July 2005, marking indicating the producer’s
identity and the marketing of the equipment after 13 August 2005 appears
on all equipment. The producer has registered with the national register of
producers (ADEME for France). According to the legal measures in force, the
customer assuming the obligations for disposal of the waste must ensure
that selective treatment, recycling and destruction of selectively collected
waste electrical and electronic equipment is carried out at facilities meeting
the technical requirements set by the Order of 13 March 2006 and Decree
2005-829 (Article 23) or at any other facility authorised for this purpose in
another member state of the European Union or in another state on condi-
tion that this waste is transferred outside France in compliance with the
measures of the afore-mentioned regulation of February 1st 1993. Ensure
that technical operations for collection and selective treatment of materials
and components of waste electrical and electronic equipment are correct
and that all fl uids have been extracted, in compliance with the requirements
or the order. Ensure that the information concerning the collection and
treatment of this waste is passed on to any later buyer.
2
MIXERS PageDYNAMIX 4 - 5MD 95 9JUNIOR STANDARD 10JUNIOR PLUS 11MMX 98 19PMX 83 20PMX 98 21PMDH 250 22 & 23MX 79 24MX 85 25MX 91 26MX 2000 27MDH 460 28 MDH 2000 30 MASTER DSC 230 V - 50 HZ 31MX 2000 DSC 230 / 115 V - 50 / 60 HZ 32SMX 450 44 & 45SMX 500 46 & 47SMX 502 - 600 48 & 49SMX 600 E 50 & 51SMX PRO 600 DSC 52 & 53SMX 800 E 54 & 55SMX PRO 800 DSC 56 & 57
CORDLESS MIXERMXP 94 - Mini cordless mixer 17
WHISKSJUNIOR WHISK 15FD 98 16FT 97 33FT 86 34FT 79 35
CORDLESS WHISKFTP 94 - Mini cordless whisk 18
MULTI-FUNCTIONJUNIOR COMBI 11 - 14PMF 250 22 & 23MF 90 36 & 38MF 2000 37 & 38MFAP 90 36 & 38 MFAP 2000 37 & 38
RICERPP 84 40PP 97 41PP 97 + 42 & 43
ACCESSORIESDYNAMIX ACCESSORIES (Foodmill ricer - Whisks - cutter bowl) 6 - 8JUNIOR COMBI ACCESSORIES (Foodmill ricer - Whisks - cutter bowl) 12 - 14RICER TOOL AP 90 / FM 90 39ICE CREAM MIXER TOOL GP 2000 29DYNATURBO TOOL FOR SMX 29
CITRUS JUICERPA 96 62
GIRAFFEGIRAFFE GIGAMIX 58, 59, 60 & 61
GIRAFFE-MIXERGM 93 63
SALAD SPINNERSELECTRIC SALAD SPINNER EM 98 64MANUAL SALAD SPINNER E 10 65MANUAL SALAD SPINNER E 20 65MANUAL SALAD SPINNER E 20 SEALED COVER 66 & 67
SUPPORTSSM4, SM6, SM8, SM10, SM12 62
VEGETABLE CUTTERSFOOD CUTTER CF 2000 63DYNACOUPE 68DYNACUBE 69
CUTTERDYNA CUTTER 70 & 71
VS ATTACHMENTVS ATTACHMENT 72 & 73
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
Dynamic range
3
2859
2859
0744
0744
2860
2860
2857
2857
0551
0551
0637
0637
0632
0632
2856
2845.XL
Emulsifying blade with screws 0550Standard blade with screws 0551Batter blade with screws 0552Smoothie emulsifying blade with screws 0553Double lip waterproof seal 0632Self-lubricating ring 0637Pins 3 x 20 0744Strain relief 230 V 0989Cover or handle screws (2) 079958Cover 2840White cover 2840.BHook 2841Power cord 230V 2842Power cord 115V 2842.1Power cord UK 2842.2Right handle 2843White right handle 2843.BShaft and bearing (Dynamix) 2844Dynamix foot assembly + ring + seal 2845Extended Dynamix foot assembly + ring + seal 2845.XLCoupling 2846Motor 230V - D160 2847Motor 115V 2847.1Motor 230V - D190 2847.2160 Dynamix label 2848190 Dynamix label 2848.2Left handle 2849White left handle 2849.BScrews + washer + handle nuts (2) 2850Hood 2851White hood 2851.BCircuit board 230V 2852Circuit board 115V 2852.1ID label D160 (230V) 2853ID label D160 (115V) 2853.1ID label D190 (230V) 2853.2ID label Dynashake (230V) 2853.5ID label Dynashake (115V) 2853.6Motor belt 2854Screws for motor belt (2) 2855Dynashake foot assembly + ring + seal 2856Shaft and bearing (Dynashake) 2857Variator knob 2858Driving shaft joint 2859Coupling hub 2860Dynashake label 230 V 2862Handle cap protectors 45710Complete attachment (see machine catalogue) -
Parts list Code
DYNAMIX 160 - 190 / DYNASHAKE MIXER
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
Dynashake mixer tool
Dynamix 190 mixer tool
4
079958 (x2)
2840
2858
2841
2842
2842.12842.20989
2859
07442860
2843
079958 (x2)
2844
05510637
0632
2845
2846
28472847.2 2855 (x2)
2854
2848
2848.2
2849 285045710
28532853.12853.22853.52853.6
2852
2851
0551
0550
0553
0552
2862
DYNAMIX 160 - 190 / DYNASHAKE MIXER
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
Dynamix 160 mixer tool
5
28752874
2870
2871
1179
2872
1181
2873
0650
089940
1195
08995
1196
2876
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
DYNAMIX Accessories
1- Grid
3-Blade
5-Nut holder
4- Compression washer
2- Grid holder
O. ring 0650Potato blade 08995Potato grid 089940Ricer inferior carter 1179Secured washer 1181Grid holder 1195Compression washer 1196Handle screws (4) 2870O. ring (x4) 2871Equipped upper shaft 2872Interior geared crown 2873Equipped output shaft 2874Equipped spacer for potato ricer 2875Nut holder + nut 2876
Parts list Code
Potato ricer assembly
Ricer grid assembling
Potato ricer assembling
6
2890
4020
2891
4022
2893
9420
2892
4021
2894
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
DYNAMIX Accessories
Parts list Code
Dynamix whisks
Dynamix whisks
Whisk tool dismantling
Lower motor whisk housing 2890Equipped output axle w/ 2 gears+pins 2891Holder assembly w/ 3 self-lubricating rings 2892Whisk tool (2) 2893Reduction gear assembly (without whisk) 2894Equipped upper shaft 4020Equipped plate with rings 4021Holder assembly screws 4022Middle gear & axle 9420
7
2880
2881
2882
1178
2880
2885
2886
2871
0658
2888
2887
2881
2884
089999904
1176
08999905
9502
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
Dynamix cutter
Equipped lid ...................................................... 2880
Blade ................................................................... 2881
DYNAMIX accessories
Parts list Code
Equipped lidDynamix cutter
Blade
Base 1178Equipped cover 2880Blade 2881Bowl 2882
O. ring 0658O. ring (x4) 2871Equipped upper shaft 2885Handle screws (4) 2886Reduction plate + ring 2887Lid + reduction gear 2888
A blade 08999904B blade 08999905Blade holder 1176Equipped cone 2884Set of screws (x3) 9502
8
9504
0908
95010950
9503 9502
8317
1027
9508
089956
9415
0637
0632
9509
9506
9507
9510
95059505.1
9501.19503.1
9507.1
9414
0863
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MD 95 MIXER
Waterproof seal 0632Self-lubricating ring 0637Hook 0863Complete stainless steel shaft + coupling 089956Non-locking switch 0908Filtering Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1Dynamic label 1027Brace screws (4) 8317Power cord (UK) 9067Emulsifying blade 9414Cutter blade w/screws 9415Power cord 230 V 9501Power cord 115 V 9501.1Handle screws (3) 9502Lower handle w/ label 230 V 9503Lower handle w/ label 115 V 9503.1Upper half handle 9504Complete handle 230 V (w/ sticker, screws, logo, switch, strain relief, power cord
9505
Complete handle 115 V (w/ sticker, screws, logo, switch, strain relief, power cord
9505.1
Braces (4) 9506Motor & screw & capacitor 230 V 9507Motor & screw & capacitor 115 V 9507.1Coupling sleeve 9508Motor holder w/ 4 screws 9509Foot assembly w/ bearing (exc. shaft + blade) 9510Carbon brushes (2) 230 V 9512 Carbon brushes (2) 115 V 9512.1
Parts list Code
9
0908
9813
4002
0535
4005
4003
4001.10950.19812
9502
7903
4006
4007
0870
40044009
0632
06420898
1027
0535.1
0950 4001
90119040
089959
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
Motor 230 V 0535 Motor 115 V 0535.1 Waterproof seal 0632Self-lubricating ring 0642Stainless steel shaft + coupling 0870 Bearing only 0898Wall bracket 089959Non-locking switch 0908 Strain relief 230 V 0950 Strain relief 115 V 0950.1 Dynamic label 1027 Label w/ serial number 230 V 1081 Label w/ serial number 115 V 1082 Complete handle 230 V 4000 Lower half handle w/ label 230 V 4001 Lower half handle w/ label 115 V 4001.1 Upper motor housing 4002 Foot assembly w/ bearing (exc. Shaft + blade) 4003 Cutter blade 4004 Braces (4) 4005 Ball bearing ring 4006 Coupling sleeve 4007 Filtering capacitor 4008Emulsifying blade 4009 Carbon brushes (2) 230 V 4050Carbon brushes (2) 115 V 4050.1Brace screws (4) 7903 Power cord 230 V 9011 Power cord 115 V 9040 Power cord (Australia) 9066 Power cord (UK) 9067 Handle screws (3) 9502 Upper half handle 9812 Switch protector 9813
Parts list Code
JUNIOR STANDARD MIXER
10
0950.1 904012144011
4011.14031
4031.1
9502
4014
0535
4013
4002
4005
4015
4006
0908
9813
7903
10270535.1
9832
1213 0950 9011
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
JUNIOR STANDARD MIXERJUNIOR PLUS AND JUNIOR COMBI MIXERS
Power Unit
Stator 230 V 0535Stator 115 V 0535.1 Wall bracket 0880.1Non-locking switch 0908Strain relief 230 V 0950Strain relief 115 V 0950.1Dynamic label 1027Id label (Junior Plus) 230V 1084 Id label (Junior Plus) 115V 1085 Id label (Junior Combi) 230V 1086 Id label (Junior Combi) 115V 1087 Speed variator 230V 1213Speed variator 115V 1214Upper motor housing 4002Braces (4) 4005Ball bearing ring 4006Complete handle w/ power cord 230V 4010 Complete handle w/ power cord 115V 4010.1 Lower half handle w/ Junior Plus label 230V 4011 Lower half handle w/ Junior Plus label 115V 4011.1 Filtering capacitor 4012Coupling 4013Speed variator knob 4014Lower aluminium motor housing 4015 Complete handle w/ power cord 230V 4030 Complete handle w/ power cord 115V 4030.1 Lower half handle w/ Junior Combi label 230V 4031 Lower half handle w/ Junior Combi label 115V 4031.1 Carbon brushes (2) 230 V 4050Carbon brushes (2) 115 V 4050.1Brace screws (4) 7903 Power cord 230 V 9011Power cord 115 V 9040Power cord (Australia) 9066Power cord (UK) 9067Handle screws (3) 9502Switch protector 9813Upper half handle Junior Plus & Junior Combi 9832Complete motor block (see machine catalogue) AC100
Parts list Code
11
4018
4063
9213.1
9902
0607
1189
4062
7916
0898
4018
4016
40044009
0642
0632
4017
0880.1
45123
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
JUNIOR COMBI Accessories
Complete foot assembly XL 300
Ball bearing 0601Waterproof seal for mixer tool 0607Bearing holder + ring 1189Ball bearing ring 4018Foot assembly with bearing 4062Kit w/ shaft lower ball bearing and coupling 4063Lower bearing assembly 7916Cutter blade with screws 9213.1Lower bearing screws - Stainless steel 9902Coupling hub 45123Complete Junior XL 300 attachment (see machinecatalogue) AC105
Parts list Code
Complete foot assembly
Ball bearing 0601Waterproof seal 0632Self-lubricating ring 0642Bearing only 0898Cutter blade 4004Emulsifying blade 4009Foot assembly with bearing 4016 Kit w/ shaft lower ball bearing and coupling 4017 Ball bearing ring 4018Coupling hub 45123Complete Junior foot (see machine catalogue) AC101
Parts list Code
12
4019
4021
*4020
9420
4022
9422
4025
9421
9424
45123
0601
0744
0766
0766
0638
089947
0601
0837A
*4020
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
Whisk tool
Ball bearing 0601 Pins 3 x 10 0638 Pins 3 x 20 0744Open head locking washer (unit) 0766 Entry gear 0837A Lower motor whisk housing 4019 Equipped upper shaft (complete) 4020Plate w/ seals and screws 4021 Holder assembly screws (4) 4022Reduction gear assembly 4025 Middle gear & shaft 9420 Equipped output axle w/ 2 gears+pins 9421 Holder assembly w/ 3 self-lubricating rings 9422 Whisk tool (2) 9424 Coupling hub 45123 Upper driving shaft 089947Complete Junior Whisk tool (see machine catalogue) AC102
Parts list Code
JUNIOR COMBI Accessories
13
2880.J
2881.J
2882
1178
2870
2871
1198
4073
1181
2873
0650
4070
1195
08999908
08999909
1196
4072
4071
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
JUNIOR COMBI Accessories
Base 1178Equipped cover 2880.JBlade 2881.JBowl 2882
JUNIOR Cutter
JUNIOR Potato ricer
JUNIOR Potato ricer
JUNIOR Cutter
Potato grid Junior 08999908Potato blade Junior 08999909O. ring 0650Secured washer 1181Grid holder 1195Compression washer 1196Ricer inferior carter Junior 1198Handle screws (x 4) 2870O. ring (x 4) 2871Interior geared crown 2873Equipped spacer for potato ricer Junior 4070Equipped output shaft Junior 4071Nut holder + nut Junior 4072Equipped upper shaft Junior 4073
Parts list Code
Parts list Code
14
4005
4041
9421
9422
4022
9424
98324040
0908
7903
9813
9502
0950
4002
089972
4006
4021
9420
0535.2
4014
1027
089959
Motor 230 V + Gear 0535.2Motor 115 V + Gear 0535.3Pin 3x14 0745 Non-locking switch 0908Strain relief 230 V 0950Strain relief 115 V 0950.1Dynamic label 1027Speed variator 230 V 1213Speed variator 115 V 1214Upper motor housing 4002Braces (4) 4005Ball bearing ring 4006Filtering capacitor 4012Speed variator knob 4014Plate w/ seals and screws 4021Holder assembly screws 4022Lower half handle w/ Junior Whisk label 230 V 4040Lower half handle w/ Junior Whisk label 115 V 4040.1Lower aluminium motor housing 4041Complete handle Junior Whisk 230 V 4042Complete handle Junior Whisk 115 V 4042.1Carbon brushes (2) 230 V 4050Carbon brushes (2) 115 V 4050.1Brace screws (4) 7903Power cord 230 V 9011Power cord 115 V 9040Power cord Australia 9066Power cord UK 9067Middle gear & axle 9420Equipped output axle w/ 2 gears+pins 9421Holder assembly w/ seals & washer 9422Whisk tool (2) 9424Handle screws (3) 9502Switch protector 9813Upper half handle 9832Label w/ serial number 230 V 1099.10Label w/ serial number 115 V 1099.11Wall bracket 089959Gear + Pin 089972
Parts list Code
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
JUNIOR WHISK MIXER
15
9502
9501 0950
9506
9420
9422
9424
9421
9418
9803
0837
9804
0908
1213
8317
9806
9801
9504
1027
9802
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
FD 98 HANDY WHISK
Pin for gear 0638 Enter gear 0837 Non-locking switch 0908 Capacitor 0909 Strain relief 230 V 0950 Strain relief 115 V 0950.1Dynamic label 1027 ID label 230 V 1059 ID label 115 V 1060 Speed variator w/ knob 230 V 1213 Speed variator w/ knob 115 V 1214 Brace screws (4) 8317 Whisk connection box w/ 3 rings 9418 Middle gear & axle 9420 Output axle 9421 Holder assembly w/ 3 self-lubricating rings 9422 Whisk tool (2) 9424 Power cord 230 V 9501 Power cord 115 V 9501.1 Handle screws (3) 9502Upper half handle 9504Braces 9506Half handle label side 230 V 9801Half handle label side 115 V 9801.1 Complete handle 230 V(w/ variator, power cord, switch and strain relief)
9802
Complete handle 115 V(w/ variator, power cord, switch and strain relief)
9802.1
Motor holder 9803 Motor support w/ 4 screws 230 V 9804 Motor support w/ 4 screws 115 V 9804.1 Variator knob 9806
Parts list Code
16
8317
9401
0702
9404
9408
9407
9410
9409
9411
0713
9414
0632
0637
9510
9402
0908
9415
1027
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MXP 94 MINI CORDLESS*
Waterproof seal 0632 Self-lubricating ring 0637Handle screw (1) 0702 Locking washer 0713 Non-locking switch 0908Dynamic label 1027 Brace screws (4) 8317 Half handle (label side) 9401 Upper half handle 9402 Clips (2) 9404 Braces (4) 9407 Motor 9408 Fan (coupling) 9409 Motor holder + screws 9410 Main shaft + locking washer 9411 Emulsifying blade 9414Cutter blade w/ screw 9415 Complete handle 9430Foot assembly w/ bearing (exc. shaft + blade) 9510
Parts list Code
*Mini cordless since : 01/01/2002
Charger and batterySee machine catalogue
*Upon stock availability
17
9416
9417
9418
9420
9421
9422
9424
8317
9402
94049401.1
0702
0908
4022
1027
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
*FTP 94 MINI CORDLESS WHISK
Handle screw (1) 0702 Non-locking switch 0908 Dynamic label 1027Holder assembly screws 4022 Brace screws (4) 8317 Lower half handle (label side) 9401.1 Upper half handle 9402 Clips (2) 9404 Braces (4) 9416 Motor & gear 9417 Whisk connection box w/ 3 rings 9418 Middle gear & axle 9420 Equipped output shaft w/ 2 gears + 2 pins 9421 Holder assembly w/ seals & washer+D331 9422 Whisks (2) 9424 Complete handle 9431
Parts list Code
Charger and batterySee machine catalogue
*Upon stock availability
18
0950.19813
9831
9040
9502
7903
9832
0908
0514
9817
9820
9023
0726
0601
9819
9818
0601
7913.F
9025
9809
9837
7916
9213
9835
9838
0607
9902
9820.1
9819.1
9011
0950
121386091214
1027
1189
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MMX 98 MIXER
Carbon brushes (2) 0514Ball bearing 0601Waterproof seal 0607Squeezing washer 0726Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115V 0950.1Warning label 1017Dynamic label 1027Label w/ serial number 230 V 1065Label w/ serial number 115 V 1066bearing holder + ring 1189Variable speed control board 230 V 1213Variable speed control board 115 V 1214Brace screws (4) 7903Braces (4) 7913.FLower bearing assembly 7916Variable speed control button 8609Power cord (2 cords) 230 V 9011Stator screws (2) 9023Self-lubricating ring 9025Power cord 115 V 9040Power cord (Australia) 9066Power cord (UK) 9067Cutter blade w/ screws 9213Handle screws (3) 9502Shaft 9809Switch protector 9813Upper motor casing (w/ carbon brushes holder) 9817Fan 9818Rotor 230 V 9819Rotor 115 V 9819.1Stator 230 V (w/ carter, carbon brushes holder) 9820Stator 115 V (w/ carter, carbon brushes holder 9820.1Complete handle w/ slot for speed control knob 230 V 9830Complete handle w/ slot for speed control knob 115 V 9830.1Lower half handle (label side) 230V 9831Upper half handle (label side) 115V 9831.1Upper half handle 9832Foot assembly (tube + housing + bell + bearing) 9835Motor & shaft housing 9837Complete foot assembly 9838Lower bearing screws - Stainless steel (3) 9902
Parts list Code
19
7913M
8309
8313
8311
8310
0604
06070611
8315
0726
0601
8304.12
8323
8304.22
83208318
8322
0829
8302
8317
0950
8303
09088319
0514
8304.13
8304.23
8303.1
8303.2
0833
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
PMX 83 MIXER
Carbon brushes (2) 0514Ball bearing 0601Self-lubricating ring 0604Waterproof seal 0607O. ring 0611Motor self-lubricating ring 0829Hook 0860Stainless steel bell 0833Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1Braces (4) 7913MComplete handle 230 V 8301Complete handle 115 V 8301.1Handle only w/ screws 8302Power cord 230 V 8303Power cord (UK) 8303.1
Parts list Code Parts list Code
Power cord 115 V 8303.2Power cord (Australia) 8303.3Complete Motor 230 V 8304Complete Motor 115 V 8304.1Rotor 230 V 8304.12Rotor 115 V 8304.13Stator 230 V 8304.22Stator 115 V 8304.23Shaft 8309S.S. lower ball bearing assembly 8310Motor & shaft housing 8311Cutter blade w/ screw 8313Upper motor casing (w/ carbon brushes holder) 8315Lower motor casing 8317Handle cover + screws 8318handle casing + screws 8319Defl ector 8320Ground wire 8321Screws w/ ground washer 8322Fan 8323
20
7913.F
9819
0601
0726
9023
9025
8309
9816
7916
9902
8313
05149817
95027903
9811.1
9813 98120950
0908
9810
9820
9040
9811
9810.1
0950.1 9011
9820.1
9819.1
9818
0607
9821
1027
089959
1189
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
PMX 98 MIXER
Carbon brushes (2) 0514Ball bearing 0601Waterproof seal 0607Squeezing washer 0726Wall bracket 089959Non-locking switch 0908Strain relief 230 V 0950Strain relief 115V 0950.1Capacitor 0972.1Warning label 1017Dynamic label 1027Label w/ serial number 230 V 1063Label w/ serial number 115 V 1064Bearing holder + seal 1189Speed variator (option) (230V) 1213Speed variator (option) (115V) 1214Brace screws (4) 7903Braces (4) 7913.FLower ball bearing assembly 7916Shaft 8309Cutter blade w/ screw 8313Power cord 230 V 9011Stator screws (2) 9023Ball bearing ring 9025Power cord 115 V 9040Power cord (Australia) 9066Power cord (UK) 9067Handle screws (3) 9502Complete handle 230 V 9810Complete handle 115 V 9810.1Lower half handle w/ label 230 V 9811Lower half handle w/ label 115 V 9811.1Upper half handle 9812Switch protector (2) 9813Motor & shaft housing + bearing 9816Upper motor casing (w/ carbon brushes holders) 9817Fan 9818Rotor 230 V 9819Rotor 115 V 9819.1Stator 230 V (w/ carter, carbon brushes holders) 9820Stator 115 V (w/ carter, carbon brushes holders) 9820.1Complete foot assembly 9821Shaft, lower ball bearing & cutter assembly 9836Lower bearing screws - Stainless steel (3) 9902
Parts list Code
21
9820
9023
0601
7913.F
9025
9842
9817
9832
9502
0950
9841.1
7903
9011
1213 - 12148609
0908
9813
9820.1
9028
9818
98199819.1
0726
9841
0950.1
9040
0514
1027
0880
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
PMDH / PMF 250 MOTOR BLOCK
Carbon brushes (2) 0514Ball bearing 0601Squeezing washer 0726Wall bracket 0880Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115V 0950.1Warning label 1017Dynamic label 1027Label w/ serial number 230 V 1071Label w/ serial number 115 V 1072Variable speed control board 230 V 1213Variable speed control board 115 V 1214Brace screws (4) 7903Braces (4) 7913.FVariable speed control knob 8609Power cord 230 V 9011Stator screws (2) 9023Self-lubricating ring 9025Coupler for armature 9028Power cord 115 V 9040Power cord (UK) 9067Handle screws (3) 9502Switch protector 9813Upper motor casing 9817Fan 9818Rotor w/ o coupling 230 V 9819Rotor w/o coupling 115 V 9819.1Stator 230 V w/ carter, carbon brushes holders 9820Stator 115 V w/ carter, carbon brushes holders 9820.1Upper half handle 9832Complete handle 230 V 9840Complete handle 115 V 9840.1Lower half handle w/ label 230 V 9841Lower half handle w/ label 115 V 9841.1Aluminium carter + ball bearing 9842BM 250 Motor block (see machine catalogue) AC005
Parts list Code
22
9057
9046
9034
9055
90510601
9050
0601
9048
9049
0608
8613
7903
9846
8612
06019051
8313
98439860
0607
7916
9844
9845
9862
9861
9902
1189
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
PMF - PMDH 250 MIXER / WHISK
PMF - PMDH 250 mixer tool
PMF 250 whisk tool
Ball bearing 0601 Waterproof seal 0607 Bearing holder + seal 1189Lower ball bearing assembly (w/ o screws) 7916 Cutter blade (w/ screw) 8313 Coupling casing + pins 9051 Tube assembly + bearing 9843 Shaft & coupling sleeve 9844Shaft, lower bearing & cutter assembly 9845 Lower bearing screws - Stainless steel (3) 9902M 250 Complete Mixer tool (see machine catalogue) AC006
Ball bearing 0601Waterproof seal for whisk 0608Pin 3 X 20 0744Pin 3 X 14 0745Brace screws (4) 7903Holder + plastic ejector + seal 8612Plastic ejectors (pair) 8613Reduction gear assembly 9034Lower casing w/ o middle gear 9046Central double gear & shaft 9048Single gear (2) + pin 9049Upper plastic casing 9050Coupling casing + pin 9051Equipped upper shaft 9055Complete upper casing 9057Whisks (2) 9846F 250 Complete whisk tool (see machine catalogue) AC007
Parts list Code
Parts list Code
XL 400 mixer tool
Ball bearing 0601Waterproof seal for mixer tool 0607Bearing holder + seal 1189Lower ball bearing assembly (w/ o screws) 7916Cutter blade (w/ screw) 8313Coupling casing + pins 9051Tube assembly + bearing 9860Shaft & coupling sleeve 9861Shaft, lower bearing & cutter assembly 9862Lower bearing screws - Stainless steel (3) 9902
Parts list Code
23
7903
7938
0950.1
7911M
0504
7908.21
0415
7905
7904M
0903
7901
7908.22
07260601
7908.117908.12
7933
7913M
7915
7917
7912
0610
0607
79509902
7916
7914
0950
7911M.1
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MX 79 MIXER
Sleeve 0415Carbon brushes (2) 0504Ball bearing 0601Waterproof seal 0607O. ring 0610Squeezing washer 0726Rocking switch 0903Strain relief 230 V 0950Strain relief 115 V 0950.1Complete handle 7901Brace screws (4) 7903ID plate 230 V 7904MID plate 115 V 7904M.1Motor housing w/ carbon brush holder 7905Motor 230 V 7908Motor 115 V 7908.1Rotor with fan 115 V 7908.11Rotor with fan 230 V 7908.12Stator 115 V 7908.21Stator 230 V 7908.22Power cord 230 V 7911MPower cord 115 V 7911M.1Power cord (UK) 7911M.2Power cord (Australia) 7911M.3Ball bearing ring 7912Brace (4) 7913MFoot assembly w/ lower bearing assembly 7914Shaft & coupling sleeve 7915Lower bearing assembly 7916Cutter blade w/ screw 7917Capacitor 7931Fan 7933Shaft, lower bearing & cutter assembly 7934Handle top w/screw 7938Lower bearing screws - Alu (3) 7950Lower bearing screws - Stainless steel (3) 9902
Parts list Code
24
0829
8302
8510
0523
07260601
8504.128504.13
0856
8504.228504.23
8318
8322
0908
8319
09508317
83038303.2
0950.1
7913M
0607
7950
7917
7916
7934
7915
8512
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MX 85 MIXER
Carbon brushes (2) 0523Ball bearing 0601Waterproof seal 0607O. ring 0610Squeezing washer 0726Motor self-lubricating ring 0829Fan 0856Hook 0860Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1Brace (4) 7913MShaft 7915Lower bearing assembly 7916Cutter blade w/ screw 7917Shaft, lower bearing & cutter assembly 7934Lower bearing screws - Alu (3) 7950Complete handle 230 V 8301Complete handle 115 V 8301.1Handle only w/ screws 8302Power cord 230 V 8303Power cord (UK) 8303.1Power cord 115 V 8303.2Power cord (Australia) 8303.3Brace screws (4) 8317Lower motor casing 8318Cover for handle 8319Ground wire 8321Screws w/ ground washer 8322Motor 230 V 8504Motor 115 V 8504.1Rotor 230 V 8504.12Rotor 115 V 8504.13Stator 230 V 8504.22Stator 115 V 8504.23Upper motor casing (w/ carbon brushes holder) 8510Foot assembly w/ lower ball bearing assembly 8512
Parts list Code
25
8317 9101.1
0950.1
9011
9007
9112
9005
9010
9002
90140768
0965
0504
9015
90169038
9023
0726
06019008.119008.12
7933
9026
9025
7916
9131
7917
7910
7950
9130
9164
9129
0607
9101
0950
9040
9009
1027
9902
1186
0881
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MX 91 MIXER
Motor brushes (2) 0504Ball bearing 0601Waterproof seal 0607Squeezing washer 0726Lock button return spring 0767Safety button return spring 0768Wall bracket 0881Long wall bracket 0881.LStrain relief 230 V 0950Strain relief 115 V 0950.1Switch (230 V / 115 V) 0965Capacitor 0972Capacitor + fi lter 0972.1Warning label 1017Dynamic label 1027Label w/ serial number 230 V 1028Label w/ serial number 115 V 1029bearing holder + seal 1186Emulsifying blade 7910Lower bearing assembly 7916Cutter blade 7917Fan 7933Lower bearing screws - Alu (3) 7950Brace screws (4) 8317Upper half handle (button side) 9002Safety switch 9005Locking switch 9007Rotor 115 V 9008.11Rotor 230 V 9008.12Plug 9009Control lever 9010Power cord 230 V 9011Handle screws (4) 9014Motor housing brush holder 9015Stator 230 V 9016Stator screws (2) 9023Ball bearing ring 9025Braces (4) 9026Stator 115 V 9038Power cord 115 V 9040Carbon brush wires 230 V 9043Power cord (Australia) 9066Power cord (UK) 9067Complete handle w/ power cord 230 V 9100Complete handle w/ power cord 115 V 9100.1Half handle, label side (230V) 9101Half handle, label side (115V) 9101.1Speed control knob 9112Complete foot assembly 9129Foot assembly w/ bearing assembly 9130Fitted shaft 9131Carbon brush wires 115 V 9143Shaft, lower bearing & cutter assembly 9164Lower bearing screws - Stainless steel (3) 9902
Parts list Code
26
2003.1
9023
2011
2006
0504
0950.12004
7903
457102001
2005
20089014
45710
07260601
9008.12
7933
9026
9025
20079164
9131
79177910
0607
9902
2009
7916
9008.11
2011.1
2002
2003 0950
2012.12012
1021
1186
0862
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MX 2000 MIXER
Motor brushes (2) 0504Ball bearing 0601Waterproof seal 0607Squeezing washer 0726Safety button return spring 0768Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1Filter 0999.20Warning label 1017Dynamic label 1021Label w/ serial number 230 V 1067Label w/ serial number 115 V 1068bearing holder + seal 1186Micro switch 1237Power on indicator light 230 V 1241Power on indicator light 115 V 1241.1Control lever 2001Safety control lever 2002Circuit board 230 V (4 switches + capacitor) 2003Circuit board 115 V (4 switches + capacitor) 2003.1Upper half handle 2004Lower half handle 2005Motor housing brush holder 2006Complete foot assembly 2007Speed control plug 2008Foot assembly w/ bearing assembly 2009Complete handle w/ power cord 230 V 2010Complete handle w/ power cord 115 V 2010.1Stator 230 V 2011Stator 115 V 2011.1Power cord 230 V > 2002 2012Power cord 115 V > 2002 2012.1Power cord (UK) > 2002 2012.2Power cord (Australia) > 2002 2012.3Brace screws (4) 7903Emulsifying blade 7910Lower bearing assembly 7916Cutter blade w/ screw 7917Fan 7933Rotor 115 V 9008.11Rotor 230 V 9008.12Power cord 230 V < 2002 9011Handle screws (4) 9014Field brace screws (2) 9023Ball bearing ring 9025Braces (4) 9026Power cord 115 V < 2002 9040Carbon brush wires 230 V 9043Power cord (Australia) < 2002 9066Power cord (UK) < 2002 9067Fitted shaft 9131Carbon brush wires 115 V 9143Shaft, lower bearing & cutter assembly 9164Lower bearing screws - Stainless steel (3) 9902Safety button 45710
Parts list Code
27
9903.1
0950.1
8317
0768
9011
9009
9005
9010
90029014
9015
90169038
0504
9023
9023
0726
0601
9008.129008.11
7933
9028
9026
9025
9024
0965
9903
0950
9040
1027
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MDH 460 DETACHABLE MIXER
Motor
Carbon brushes (2) 0504Ball bearing 0601Squeezing washer 0726Lock button return spring 0767Safety button return spring 0768Strain relief 230 V 0950Strain relief 115 V 0950.1Switch 0965Capacitor 0972Capacitor + fi lter 0972.1Warning label 1017Dynamic label 1027ID label 230 V 1054ID label 115 V 1055Fan 7933Brace screws (4) 8317Half handle (button side) 9002Safety button 9005Lock button 9007Rotor 115 V 9008.11Rotor 230 V 9008.12Plug 9009Control lever 9010Power cord 230 V 9011Handle screws (4) 9014Motor housing brush holder 9015Stator 230 V 9016Field brace screws (2) 9023Lower aluminum housing 9024Ball bearing ring 9025Brace (4) 9026Coupler for armature 9028Stator 115 V 9038Power cord 115 V 9040Ground wire 230 V 9043Power cord (Australia) 9066Speed control plug 9112Ground wire 115 V 9143Complete handle 230 V 9900Complete handle 115 V 9900.1230 V Half handle (label side) 9903115 V Half handle (label side) 9903.1
Parts list Code
28
6301
6305
6304
6306
6302
0601
9051
6307
6303
9847
6308
6329
9028
6315
7912
6327
0601H
6320
6325
6310
63216312
6322
6328
6330
6323 63246326
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
DYNATURBO GP 2000
Ball bearing 0601Pin 0744Complete shaft w/ bearing and coupling cage 6301Complete tube w/ black tip 6302Complete lever (pad support, self lubricating bronzering, toric washer)
6303
Stainless steel cream bell 6304Stainless steel fruit bell 6305Stainless steel knife 6306Knife key 6307Shaft key 6308Toric washer 6309Self lubricating ruff bronze ring 6310Level (stainless steel only) 6311Waterproof ring 6312Compling cage 9051Black tip 9847
Parts list Code
DYNATURBO tool for SMX
Stainless steel ball bearing 0601HBushing 6310Waterproof ring 6312Complet shaft 6315Motor toric seal 6320Complete lower ball bearing 6321Bell toric seal 6322Stainless steel fruit bell 6323Stainless steel cream bell 6324Tube 6325Stainless steel mixer bell 6326Blade 6327Emulsifying blade 6328Shaft key 6329Knife key 6330Ball bearing sleeve 7912Coupler for shaft 9028
Parts list Code
29
2011
20040950
7903
2003
2005
9014
45710
20012002
2021 2012
45710
2023
2006
0504
2011.1
9023
07260601
9008.119008.12
9028
9026
9025
2020
1021
2023.1
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MDH 2000 / BM 2000 MOTOR BLOCK
Motor
Carbon brushes (2) 0504Ball bearing 0601Squeezing washer 0726Safety button return spring 0768Strain relief 230 V 0950Strain relief 115 V 0950.1C.E.M. Filter 0999.20Warning label 1017Dynamic label 1021ID label 230 V 1075ID label 115 V 1076Micro switch 1237Power on indicator light 230 V 1241Power on indicator light 115 V 1241.1Control lever 2001Control lever protector 2002Circuit board 230 V (4 switches + capacitor) 2003Circuit board 115 V (4 switches + capacitor) 2003.1Half handle (button side) 2004Half handle (label side) 2005Motor housing brush holder 2006Speed control plug 2008Complete handle 230 V 2010Complete handle 115 2010.1Stator 230 V 2011Stator 115 V 2011.1Power cord 230 V > 2002 2012Power cord 115 V > 2002 2012.1Power cord (UK) > 2002 2012.2Power cord (Australia) > 2002 2012.3Lower aluminum housing 2020Speed variator knob 2021Complete handle 230 V with variator (from N°040132) 2022Complete handle 115 V with variator (from N°040132) 2022.1Speed variator 230 V 2023Speed Variator 115 V 2023.1Brace screws (4) 7903Fan 7933Rotor 115 V 9008.11Rotor 230 V 9008.12Power cord 230 V < 2002 9011Handle screws (4) 9014Field brace screws (2) 9023Motor ball bearing sleeve 9025Brace (4) 9026Coupler for armature 9028Power cord 115 V < 2002 9040Carbon brush wires 230 V 9043Power cord (Australia) < 2002 9066Carbon brush wires 115 V 9143Safety cover 45710
Parts list Code
30
2051
2052
0542
2004 0950
2012
7903
457102001
2002
0768
2005
9014
45710
2021 2054 2003
2055
2056
9131
9164
7916
2057
2053
7917.1
1021
1186
0862
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MASTER DSC 230 V / 50 Hz
Motor 230 V 0542Waterproof seal 0607Safety button return spring 0768Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1Warning label 1017Dynamic label 1021 Label w/ serial number 230 V 1089Bearing holder + seals 1186Micro switch 1237Power on indicator light 230 V 1241 Control lever 2001Safety control lever 2002Circuit board 230 V (4 switches + capacitor) 2003 Upper half handle (button side) 2004Upper half handle (label side) 2005Power cord 230 V 2012 Power cord (UK) 2012.2 Power cord (Australia) 2012.3 Variable speed knob 2021Complete handle 2050Upper motor casing 2051Silent block washer 2052Complete foot assembly 2053Regulation circuit board 2054Braces (4) 2055Centering ring 2056Foot assembly 2057Brace screws (4) 7903 Lower bearing assembly 7916Cutter blade w/ screw 7917.1 Handle screws (4) 9014Fitted shaft 9131Shaft, lower bearing & cutter assembly 9164 Lower bearing screws - Stainless steel (3) 9902 Safety button 45710
Parts list Code
31
2006DSC
9023
07260601
9008.12DSC9008.11DSC
7933
050405042061
2003.1DSC2003DSC
095020047903
457102001
2002
20212005
9014
45710
9025
9026
9902
0607
7916
7917
7910
9131
2009
9164
2007
1021
0601
2011.1DSC
2011DSC
1186
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MX 2000 DSC 230 / 115 V - 50 / 60 Hz
Carbon brushes (2) 0504Ball bearing 0601Waterproof seal 0607Squeezing washer 0726Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1Warning label 1017Dynamic label 1021ID label 115 V 1097ID label 230 V 1099.15Bearing holder + seals 1186Control lever 2001Safety control lever 2002230 V electronic circuit (variator + regulator circuit+ control circuit)
2003DSC
115 V electronic circuit (variator + regulator circuit+ control circuit)
2003.1DSC
Upper half handle (button side) 2004Upper half handle (label side) 2005Motor housing brush holder 2006DSCComplete foot assembly 2007Foot assembly 2009Stator 230 V 2011DSCStator 115 V 2011.1DSCPower cord 230 V 2012Power cord 115 V 2012.1Power cord (UK) 2012.2Power cord (Australia) 2012.3Variable speed control button 2021Complete handle 230 V 2060Complete handle 115 V 2060.1Sensoring washer (washers, magnets, screws,small brace)
2061
Brace screws (4) 7903Emulsifying blade 7910Lower motor casing 7916Brace screws (4) 7917Fan 7933Rotor 115 V 9008.11DSCRotor 230 V 9008.12DSCHandle screws (4) 9014Field brace screws (2) 9023Motor ball bearing sleeve 9025Braces 9026Carbon brush wires (2) (230 V) 9043Fitted shaft 9131Carbon brush wires (2) (115 V) 9143Shaft, lower ball bearing & cutter assembly 9164Power bearing screws - Stainless steel (3) 9902Safety cover 45710
Parts list Code
32
9015
9016
9023
9038
9705
7903
0608
8613
8615
07260601
7908.317908.32
7933
9026
9711
9702
9704
0504
9011
09509710
8317
0768900590109002
9014
90129009
97139753
8612
9712
A
B
C
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
FT 97 WHISK
Carbon brushes (2) 0504Ball bearing 0601Waterproof seal 0608Squeezing washer 0726Pin 3 X 20 0744Pin 3 X 14 0745Safety button return spring 0768Wall bracket 0881Strain relief 230 V 0950Strain relief 115 V 0950.1Switch 230 V 0964Switch 115 V 0965Capacitor 0972Capacitor + fi lter 0972.1ID label 115 V 1019ID label 230 V 1020Dynamic label 1027Brace screws (4) 7903Rotor 115 V 7908.31Rotor 230 V 7908.32Fan 7933Brace screws (4) 8317Holder + plastic ejector + seal 8612Plastic ejector (pair) 8613Whisk only (pair) 8615Half handle (button side) 9002Safety button 9005Plug 9009Control lever 9010Power cord 230 V 9011Variable speed control button 9012Handle screws (4) 9014Motor housing brush holder 9015Stator 230 V 9016Field brace screws (2) 9023Braces 9026Stator 115 V 9038Power cord 115 V 9040Carbon brush wires (230 V) 9043Power cord (Australia) 9066Power cord (UK) 9067Carbon brush wires (115 V) 9143Lower aluminum housing 9702Middle gear & shaft 9704Output gear & shaft + Pins 9705Complete handle 230 V 9706Complete handle 115 V 9706.1Half handle (label side) 230 V 9710Half handle (label side) 115 V 9710.1Plate w/ 3 seals 9711Holder without gear 9712Variable speed control board 230 V 9713Variable speed control board 115 V 9753
Parts list Code
33
0829
8510
0523
07260601
8618
0856
8617
8318
8322
7913M
8614
8610
8611
8613
0608
8615
8616
8612
8303
8609 8608
8319 0908 0950
86018602
8317
7903
IMPORTANT : Each spare part order must include the type and the number ofthe product which appears on the identifi cation plate.
FT 86 WHISK
Carbon brushes (2) 0523Ball bearing 0601Waterproof seal 0608Squeezing washer 0726Pin 3 X 20 0744Pin 3 X 14 0745Motor bushing 0829Fan 0856Hook 0860Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1Brace screws (4) 7903Brace 7913MPower cord 230 V 8303Power cord (UK) 8303.1Brace screws (4) 8317Lower motor housing 8318Top handle screws 8319Ground wire 8321Screws with ground washers (2) 8322Motor housing brush holder 8510Complete handle 230 V 8601Handle only + cap + screws 8602Equipped motor 8604Variable speed control board 230 V 8608Variator knob w/ clips 8609Middle gear & shaft 8610Output gear & shaft 8611Holder + 2 plastic ejectors + 2 seals + 3 rings 8612Plastic ejector (pair) 8613Lower aluminum housing 8614Whisk only (pair) 8615Complete axles, support, cones and pignons 8616Stator 230 V 8617Rotor 230 V 8618
Parts list Code
34
7905
0415
0601
7908.217908.22
7908.317908.32
7933
7913.F
7918
7920
7919
7924.F
0504
7904F
7903
7938 0950
7911F.17911F
7901
0726
7921
7921.1
7922
7922
7923
7925
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
FT 79 WHISK
Sleeve 0415Carbon brushes (2) 0504Ball bearing 0601Waterproof seal 0608Squeezing washer 0726Pin 3 x 20 0744Pin 3 x 14 0745Strain relief 230 V 0950Strain relief 115 V 0950.1Complete handle 7901Brace screws (4) 7903ID plate 230 V 7904 FMotor housing brush holder 7905Stator 115 V 7908.21Stator 230 V 7908.22Motor 230 V 7908.3Rotor 115 V 7908.31Rotor 230 V 7908.32Motor 115 V 7908.4Power cord 230 V 7911 FPower cord 115 V 7911 F.1Braces 7913.FPlate assembly with 3 bronze seals 7918Middle gear & shaft 7919Output gear & shaft 7920Variable speed control board 7921Speed control plug 7921.1Holder assembly w/ 3 self-lubricating rings 7922Plastic protector 7923Lower housing 7924 FWhisk (pair) 7925Capacitor 7931Fan 7933Top handle w/ screws 7938
Parts list Code
35
9015
90169038
9023
0726
0601
9008.129008.11
7933
9028
9026
9025
9024
0504
9013
9011
09509001
8317
07689005
9010
9002
9014
0965
9009
9012
90531027
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MF 90 & MFAP 90 MIXERS
Carbon brushes (2) 0504Ball bearing 0601Squeezing washer 0726Lock button return spring 0767Safety button, return spring 0768Strain relief 230 V 0950Strain relief 115 V 0950.1Switch 230V 0964Switch 115V 0965Capacitor 0970Capacitor + fi lter 0972.1Warning label 1017Dynamic label 1027ID label 230 V 1030ID label 115 V 1031Fan 7933Brace screws (4) 8317Complete handle 230 V 9000Complete handle 115 V 9000.1Lower half handle (label side) 230 V 9001Lower half handle (label side) 115 V 9001.1Upper half handle (button side) 9002Safety button 9005Lock button 9007Rotor 115 V 9008.11Rotor 230 V 9008.12Plug 9009Control lever 9010Power cord 230 V 9011Variable speed knob 9012Variable speed control board 230 V 9013Handle screws (4) 9014Motor housing brush holder 9015Stator 230 V w/ carter, carbon brush holders 9016Field brace screws (2) 9023Lower aluminum housing 9024Ball bearing ring 9025Braces (4) 9026Coupler for armature 9028Stator 115 V w/ carter, carbon brush holders 9038Power cord 115 V 9040Carbon brush wires 230 V 9043Variable speed control board 115 V 9053Power cord (Australia) 9066Power cord (UK) 9067Carbon brush wires 115 V 9143
Parts list Code
36
0504
20112011.1
9023
0726
9008.129008.11
7933
9028
9025
2020
2023
0950
2004457107903
2002
2005
9014
20032003.1
9012
2023.1
9026
0601
2006
45710
2021
2001
1021
2012
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MF 2000 & MFAP 2000 MIXERS
Carbon brushes (2) 0504Ball bearing 0601Squeezing washer 0726Safety button, return spring 0768Strain relief 230 V 0950Strain relief 230 V 0950.1Filter C.E.M. 230 V 0999.20Warning label 1017Dynamic label 1021ID label 230 V 1069ID label 115 V 1070Micro switch 1237Power on indicator light 230 V 1241Power on indicator light 115 V 1241.1Control lever 2001Control lever protector 2002Circuit board 230 V (4 switches + capacitor) 2003Circuit board 115 V (4 switches + capacitor) 2003.1Upper half handle (button side) 2004Upper half handle (label side) 2005Motor housing + carbon brush holders 2006Stator 230 V (carter + carbon brush holders) 2011Stator 115 V (carter + carbon brush holders) 2011.1Power cord 230 V > 2002 2012Power cord 115 V > 2002 2012.1Power cord (UK) > 2002 2012.2Power cord (Australia) > 2002 2012.3Lower aluminum housing 2020Variable speed knob 2021Complete handle 230 V 2022Complete handle 115 V 2022.1Variable speed circuit board 230 V 2023Variable speed circuit board 115 V 2023.1Safety plug 45710Brace screws (4) 7903Fan 7933Rotor 115 V 9008.11Rotor 230 V 9008.12Power cord 230 V < 2002 9011Handle screws (4) 9014Field brace screws (2) 9023Motor ball bearing sleeve 9025Braces (4) 9026Rotor coupler 9028Power cord 115 V < 2002 9040Carbon brush wires 230 V 9043Power cord (Australia) < 2002 9066Carbon brush wires 115 V 9143BM 2000 motor block (see machine catalogue) AC001
Parts list Code
37
7903
8615
9034
9055
9057
8612
9046
9051
9901
7917
7910
7916
9031
9004
9031L
9004L
1186
0607
9902
9901L
0601
0601
0601
9048
0608
8613
9049
9050
9051
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MF 90/2000 & MFAP 90/2000 MIXERS
MF 90/2000 & MFAP 90/2000mixer tool
M500 mixer tool
MF 90/2000 & MFAP 90/2000whisk tool
Wall bracket
Ball bearing 0601Waterproof seal 0607Bearing holder + seal 1186Emulsifying blade 7910Lower bearing assembly 7916Cutter blade w/ screw 7917Lower bearing screws - Alu (3) 7950Shaft, lower bearing & cutter assembly 9004Shaft 9031Coupling casing + pin 9051Tube assembly 9901Lower bearing screws - Stainless steel (3) 9902M 90 Complete Mixer tool (see machine catalogue) AC002
Shaft, lower bearing & cutter assembly 9004LShaft 9031LTube assembly 9901L
Ball bearing 0601Waterproof seal 0608Pin 3 X 20 0744Pin 3 X 14 0745Brace screws (4) 7903Holder + plastic ejector + seal 8612Plastic ejector (pair) 8613Whisk (Pair) 8615Reduction gear assembly 9034Lower casing w/ o middle gear 9046Central double gear & shaft 9048Single gear (2) 9049Upper plastic casing 9050Coupling casing + pin 9051Equipped upper shaft 9055Complete upper casing 9057F 90 Complete whisk tool (see machine catalogue) AC003
Wall bracket 0880
Parts list Code
Parts list Code
Parts list Code
Parts list Code38
9051
0601
9054
0601
8430
8429
9062
8450
9060
9064
0609
8423
08360830
0834
8422
0871
9055
9065
A
B
9054
9230 a (L:300)9230 b (L:400 )
9230c (L:120)
8430
8429
9231
9233
0601
9051
0601
0647079959
9055
9065
9232
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
AP 90 RICER ATTACHMENT
FM 90 - 91 - 92 MASTER BEATER WHISKSFM 90 : Accessoire Fouet Ballon
Waterproof seal 0609 Rubber washer 0830 Blade 0834 Washer friction 0836Grid 0871 Anti-friction washer 8422 Lower bolt 8423 Double gear with washer 8429 Single gear & shaft 8430 Shaft gear + pin 8450Coupling casing w/ pin 9051 Reducing casing & seal 9054 Equipped upper shaft 9055 Foot assembly 9060 Main shaft + gears 9062 Reduction casing screws (4) 9064 Complete reduction box 9065
Ball bearing 0601Bearing 0647Clips 079959Double gear with washer 8429Middle gear & axle 8430Coupling casing w/ pin 9051Reducing casing+2 seals 9054Equipped upper shaft 9055Complete reduction box 9065Mono whisk / L : 300 mm 9230 aMono whisk / L : 400 mm 9230 bMono whisk / L : 120 mm 9230 cMain shaft 9231Lower carter 9232Handle + casing 9233Complete reduction box w/ out bowl whisk and handle 9250
Parts list Code
Parts list Code
FM 90 - 91 - 92 MASTER BEATER WHISKS
39
7903
8404
7905
7908.227908.21
0415
07260601
7908.32 - 7908.317933
7913.F
8431
8429
8428
7901
09507911.M
7938
0905
0609
0842
8422
0835
08300836
8423
8419
8430
0504 8404.1
0601
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
PP 84 RICER
Sleeve 0415Carbon brushes w/ caps (2) 0504Ball bearing 0601Waterproof seal 0609Squeezing washer 0726Pin 3 x 14 0745Rubber washing 0830Fan 0835Washer friction 0836Rice grid 0842Push button switch 0905Strain relief 230 V 0950Strain relief 115 V 0950.1Equipped handle 7901Brace screws (4) 7903Upper carter w/ carbon brush holders 7905Stator 230 V 7908.22Stator 115 V 7908.21Rotor 230 V 7908.32Rotor 115 V 7908.31Power cord 230 V 7911MPower cord 115 V 7911M.1Braces (4) 7913FCapacitor 7931Fan 7933Handle cap w/ screws 7938Identifi cation plate 230 V 8404Identifi cation plate 115 V 8404.1Motor 230 V 8408Motor 115 V 8408.1Foot assembly 8419Antifriction washer 8422Lower bolt 8423Output shaft w/ gear 8428Double gear with washer 8429Middle gear & axle 8430Plate w/ 2 seals 8431
Parts list Code
40
0726
0601
7908.32 - 7908.31
7933
9709
8430
8429
8428
8450
0609
0842
8422
0835
0830
0836
8423
9707
9026
9023
9016
9015
9038
0504
09509730
8317
90059010
9002
9014
0965
91129009
0601
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
PP 97 RICER
9011 (2 wires)
9708 (3 wires)
9708.1 (3 wires)
Carbon brushes (2) 0504Ball bearing 0601Waterproof seal 0609Squeezing washer 0726Pin 3 x 14 0745Safety button return spring 0768Rubber washing 0830Fan 0835Washer friction 0836Ricer grid 0842Wall bracket 0881Strain relief 230 V 0950Strain relief 115 V 0950.1Switch Europe 0964Switch 115 V 0965Capacitor 0972Capacitor + fi lter 0972.1Dynamic label 1027ID label 230 V 1056ID label 115 V 1057Rotor 115 V 7908.31Rotor 230 V 7908.32Fan 7933Brace screws (4) 8317Antifriction washer 8422Lower bolt 8423Output shaft w/ gear 8428Double gear with washer (from N°050025) 8429Middle gear & axle 8430Shaft gear + pin 8450Upper half handle 9002Safety button 9005Plug 9009Control lever 9010Power cord 2 cond. 230 V (from N°050025) 9011Handle screws (4) 9014Motor housing w/ carbon brush holders 9015Stator 230 V w/ carter carbon brush holders 9016Stator screws (2) 9023Braces (4) 9026Stator 115 V w/ carbon brush holders 9038Power cord 115 V w/ carbon brush holders (from N°050025) 9040Carbon brush wires 230 V 9043Power cord (Australia) (from N°050025) 9066Power cord (UK) (from N°050025) 9067Speed control plug 9112Carbon brush wires 115 V 9143Complete handle 230 V 9700Complete handle 115 V 9700.1Complete foot assembly 9707Power cord + Label 230 V (from N°050025) 3 wires 9708Power cord + Label 115 V (from N°050025) 3 wires 9708.1Plate w/ 2 seals 9709Lower half handle (label side) 230 V 9730Lower Half handle (label side) 115 V 9740
Parts list Code
41
9026
9760
0769
9762
8429
8430
9709
9764
9233
9010
9112
0965 90050768
9009
0504
9013 - 9053
9012
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
PP 97 PLUS MOTOR BLOCK
PP97 plus equipped lower carter
Carbon brushes 0504Ball bearing 0601Rubber washer 0726Safety button return spring 0768Strain relief 230 V 0950Strain relief 115 V 0950.1Switch 0965Capacitor (115 V) 0972Capacitor + fi lter 0972.1Dynamic label 1027Identifi cation plate 230 V 109913Identifi cation plate 115 V 109914Rotor 115 V 7908.31Rotor 230 V 7908.32Fan 7933Brace screws 8317Upper half handle 9002Security cap 9005Handle cap 9009Control lever 9010Variable speed knob 9012Variable speed control board 230 V 9013Handle screw 9014Top housing 9015Stator 230 V 9016Stator screws 230 V (2) 9023Stator 115 V 9038Carbon brush wires (230 V) 9043Variable speed control board 115 V 9053Knob (115 V) 9112Carbon brush wires (115 V) 9143Power cord 230 V 9708Power cord 115 V 9708.1Lower half handle 230 V (with label) 9760Lower half handle 115 V (with label) 9760.1Lower motor housing 9761Complete handle w/ power cord 230 V 9765Complete handle w/power cord 115 V 9765.1
M4 Washer 0769Double gear with washer 8429Middle gear axle 8430Braces 9026Handle support 9233Plate w/ 2 seals 9709Exit shaft w/ gear 9762Aluminium carter, foot and seals 9764
Parts list Code
Parts list Code
42
58 0950 9708
9014
8317
9015
9016
9023
0726
7908.32
9761
90027912
0647
079959
9766
9230a (L:300)9230b (L:400)
9240
0609
9241
0842
8422
0835
0830
0836
8423
9230c (L:120)
7912
0504
0601
0601
0641
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
PP 97 PLUS ACCESSORIES
PP97 plus / FM97 Whisk tool
AP 97 Ricer tool
D15 Bearing 0647Rubber ring 079959Ball bearing 7912Mono whisk L : 300 9230aMono whisk L : 400 9230bMono whisk L : 120 9230cEquipped male casing (shaft, bearing seal, ball bearing, rubber ring)
9766
Waterproof seal 0609Toric seal 0641Rubber washing 0830Fan 0835Friction washer 0836Ricer grid 0842Bearing seal 7912Antifriction seal 8422Lower bolt 8423Equipped male casing, bearing seal, tube and complete lever assembly
9240
Exit shaft 9241
Parts list Code
Parts list Code
43
45400
45139
45320
0950
45300
45400
45200.2
45144
09030990
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SMX 450 MIXER
Fan 0509Carbon brushes (pair) 0529Ball bearing 0601Motor ball bearing 0602Rubber ring 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Rocking switch 0903Capacitor 0909Strain relief 230 V 0950Strain relief 230 V 0950.1Push button switch 0990ON/OFF label 1008Foot assembly (tube, bearing, assembly) 45110Shaft & ball bearing 45120Coupling sleeves 45122Motor & shaft drive sprocket 45123Fan housing 45125Lower bearing assembly 45130Brush holder w/ cap (1) 230 V 45131Brush holder w/ cap (1) 115 V 45131.1Lower motor casing 45132Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Rotor 230 V 45136Rotor 115 V 45136.1Stator screws (2) 45137Braces (4) 45138Brace screws (4) 45139ID plate 45144Cutter blade w/ screw 45161Motor 115 V 45200.1Motor 230 V 45200.2
Parts list Code
44
0509
0602
45135
45125
45133
45136
45132
45123
0602
0529
45138
45230
45122
45123
0601
45120
45161
45130
45110
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 450 MIXER
Squeezing washer (4) 45230Upper carter 230 V 45300Upper carter 115 V 45300.1Power cord 230 V 45320Power cord 115 V 45320.1Power cord (UK) 45320.2Power cord (Australia) 45320.3Complete handle 45400Sleeve 45500Kit w/ shaft, lower bearing, coupler, cutter 45533Conversion kit (SMX450 to SMX500) 45600Perforated disc 45810Perforated disc w/ pin 45820Bearing screws for aluminium bell (3) 7950Lower bearing screws - Stainless steel (3) 9902
Parts list Code
45
0950
45320
05090777
45503
076045131 - 45131.1
45133
45505
45610
45132
0602
45122
0602
45130
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SMX 500 MIXER
Turbine 0509Carbon brushes (pair) 0529Ball bearing 0601Motor ball bearing 0602Waterproof seal 0607Spring 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Locking switch 0907Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1bearing holder + seal 1185Shaft & ball bearing 45120Coupling sleeves 45122Motor & shaft drive sprocket 45123Fan housing 45125Lower bearing assembly 45130Brush holder w/ cap (1) 45131Brush holder w/ cap (1) 45131.1Lower motor casing 45132Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Rotor 230 V 45136Rotor 115 V 45136.1Stator screws(2) 45137Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161
Parts list Code
46
45120
45720
0601
45123
45135
45138
45137
45136
0529
4512545230
4513945501
45502
0908
45126
45161
1185
45722
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 500 MIXER
Double isolation part 45126Motor 115 V 45200.1Motor 230 V 45200.2Squeezing washers (4) 45230Power cord 230 V 45320Power cord 115 V 45320.1Power cord (UK) 45320.2Power cord (Australia) 45320.3Lower housing (orange plastic piece) 45501Upper housing (orange plastic piece) 45502Top housing 45503Sleeve & complete handle 45505Complete housing w/ screws 45510Kit w/ shaft, lower bearing, cutter 45533Handle cap (2) 45610Foot assembly 45720Complete foot assembly 45722Perforated disc 45810Perforated disc w/ pin 45820Lower bearing screws for aluminium bell (3) 7950Lower bearing screws - Stainless steel (3) 9902
Parts list Code
47
45139
45503
45505
45610
45200.2
45120
45122
45720
45123
0601
45161
45502
90110950
45501
090845722
45138
1185
0950.19040
45510
45130 / 45130.I
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SMX 502 - 600 MIXER
Control case45510Fan 0509
Carbon brushes (pair) 0529Ball bearing 0601Motor ball bearing 0602Self-lubricating ring 0603Waterproof seal 0607O. ring 0610Rubber washer 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Locking switch 0907Non-locking switch 0908Capacitor 0909Strain relief 230 V 0950Strain relief 115 V 0950.1ID label 230 V 1048ID label 115 V 1049Bearing holder + seal 1185Lower bearing screws for aluminium bell (3) 7950Power cord 230 V 9011Power cord 115 V 9040Power cord (Australia) 9066Power cord (UK) 9067Lower bearing screws - Stainless steel (3) 9902Stainless steel lower bearing screws (3) 9902.IShaft & ball bearing 45120Coupling sleeves 45122Motor & shaft drive sprocket 45123Fan housing 45125Double isolation part 45126Lower bearing assembly 45130Complete stainless steel lower bearing 45130.ILower motor casing 45132
Parts list Code
48
A
B
45125
45133
45135
0509
0603 0607
0610
0529
0602
4513645136.1
45132
0602
45123
45130 / 45130.I
45720
45138 45126
0776
9902.I9902
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 502 - 600 MIXER
Parts list Code
Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Rotor 230 V 45136Rotor 115 V 45136.1Stator screws (2) 45137Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161Motor 115 V 45200.1Motor 230 V 45200.2Squeezing washer (4) 45230Lower housing (orange plastic piece) 45501Upper housing (orange plastic piece) 45502Top housing 45503Sleeve & complete handle 45505Complete housing w/ screws 45510Kit w/ shaft, lower bearing, coupler, cutter 45533Handle cap (2) 45610Foot assembly 45720Locking kit 45721Complete foot assembly 45722Perforated disc 45810Perforated disc w/ pin 45820
49
45139
45503
45709
45720
45123
0601
45708
45706
9011.19040.10950
45707
45710
45710
45620
45200.2
45122
45138
1185
45130 / 45130.I
45120
45161
45722
0950.1
45706.1
45610
4571245712.1
IMPORTANT : Each spare part order must include the type and the numberof the product which appears on the identifi cation plate.
SMX 600 E MIXER
Aluminium Fan 0509Carbon brushes (pair) 0529Ball bearing 0601Motor ball bearing 0602Self-lubricating ring 0603Waterproof seal 0607O. ring 0610Rubber washer 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1ID label 230 V 1007ID label 115 V 1009Bearing holder + seal 1185Shaft & ball bearing 45120Coupling sleeves 45122Motor & shaft drive sprocket 45123Fan housing Alu 45125Fan housing Plastic 45125.PDouble isolation part 45126Lower ball bearing assembly 45130Complete stainless steel lower bearing 45130.ILower motor casing 45132Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Rotor 230 V 45136Rotor 115 V 45136.1Stator screws (2) 45137
Parts list CodeControl case45712
50
45125
45125.P
45133
4513545135.1
0509
0529
0602
45136
45132
0602
45123
45720
45138 45126
9902.I9902
45633
0776
0603 0607
0610
45130 / 45130.I
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 600 E MIXER
Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161Motor 115 V 45200.1Motor 230 V 45200.2Squeezing washers (4) 45230Top housing 45503Kit w/ shaft, lower bearing, coupler, cutter 45533Handle cap (2) 45610Circuit board 45620Circuit board 45620.1Plastic Fan 45633Top housing (orange plastic piece) 45706Screws control case set 45706.1Lower housing (orange plastic piece) 45707Handle cap protector (unit) 45708Sleeve & complete handle & label & cap 45709Handle cap protectors (unit) 45710Lower housing w/ screws 45711Complete control casing 230V 45712Complete control casing 115V 45712.1Foot assembly w/ lower bearing 45720Complete foot assembly 45722Power cord 230 V 9011.1Power cord 115 V 9040.1Power cord (Australia) 9066.1Power cord (UK) 9067.1Bearing support screws - Stainless steel (3) 9902Stainless steel lower bearing screws (3) 9902.I
Parts list Code
51
45708
45139
45630
45709 DSC
45836 DSC
45126
45138
45631
1185
9028
0601
46000
45706
45620
45710
45710
45707
45161
45230
45632
45635
45831
45130 / 45130.I
45610
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SMX 600 DSC MIXER
Control case45712Carbon brushes (pair) 0529
Ball bearing 0601Motor ball bearing 0602Self-lubricating ring 0603Waterproof seal 0607O. ring 0610Toric seal 0641Rubber washer 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1Bearing holder + seal 1185ID label 230 V 1093ID label 115 V 1094Fan housing Alu 45125Fan housing Plastic 45125.PDouble isolation plate 45126Lower bearing assembly 45130Complete stainless steel lower bearing 45130.ILower motor casing 45132Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Stator screws(2) 45137Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161Squeezing washers (4) 45230Handle cap (2) 45610Circuit board 230 V 45620Circuit board 115 V 45620.1Regulation circuit board + screws + insulating part 45630Foot assembly w/ bearing assembly 45631Shaft & ball bearing 45632Fan DSC 45633DSCDSC Complete foot assembly 45635Top housing (orange plastic piece) 45706Screws control case set 45706.1Lower housing (orange plastic piece) 45707Handle cap protector (unit) 45708
Parts list Code
52
0950 9011.1
45633 DSC
0529
4513
3
4513
2
4583
545
125
4512
5.P
0602
0776
9051
0602
06417912
45631
45135
45137
9902
9902.I45130 / 45130.I
0950.1
45706.1
0603 06070610
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 600 DSC MIXER
Upper motor casing 45709DSCHandle cap protector (unit) 45710Complete housing w/ screws 45711Complete control casing 230V 45712Complete control casing 115V 45712.1Lower housing 45831Rotor 230 V 45835Rotor 115 V 45835.1Motor 230 V 45836 DSCMotor 115 V 45836.1DSCSleeve & complete handle & label & cap 46000Ball bearing ring 7912Power cord 230 V 9011.1Motor & shaft drive sprocket 9028Power cord 115 V 9040.1Coupling casing + pin 9051Power cord (Australia) 9066.1Power cord (UK) 9067.1Lower bearing screws - Stainless steel (3) 9902Stainless steel lower bearing screws (3) 9902.I
Parts list Code
53
45139
45503
45830
45831
45832
45161
45708
45706
9011.10950
45707
45710
45710
45620
45836
45126
9028
45833
45840
45138
1185
45706.1
45130 / 45130.I
45610
4571245712.1
IMPORTANT : Each spare part order must include the type and the numberof the product which appears on the identifi cation plate.
SMX 800 E MIXER
Control case45712Aluminium Fan 0509
Carbon brushes (pair) 0529Ball bearing 0601Motor ball bearing 0602Self-lubricating ring 0603Waterproof seal 0607O. ring 0610Toric seal 0641Rubber washer 0760Clips 0776Washer & bolt for fan 0777Wall bracket 0862Strain relief 230 V 0950Strain relief 115 V 0950.1ID label 230 V 1073ID label 115 V 1074Bearing holder + seal 1185Fan housing Alu 45125Fan housing Plastic 45125.PDouble isolation plate 45126Lower bearing assembly 45130Complete stainless steel lower bearing 45130.ILower motor casing 45132Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Stator screws(2) 45137Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161Squeezing washer (4) 45230Top housing 45503Handle cap (2) 45610Circuit board 230 V 45620
Parts list Code
54
4512545125.P
45133
4513545135.1
0509
0529
0602
45835
45132
0602
9051
45130 / 45130.I
45832
7912 0641 9902.I
9902
45633
0776
45835.1
0603 06070610
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 800 E MIXER
Parts list Code
Plastic fan 45633Circuit board 115 V 45620.1Top housing (orange plastic piece) 45706Screws control case set 45706.1 Lower housing (orange plastic piece) 45707 Handle cap protector (unit) 45708 Handle cap protector (unit) 45710 Complete housing w/ screws 45711 Complete control casing 230V 45712Complete control casing 115V 45712.1Sleeve & complete handle & label & cap 45830 Lower housing 45831 Foot assembly w/ bearing assembly 45832 Shaft & ball bearing 45833Kit w/ shaft, lower bearing, coupler, cutter 45834 Rotor 230 V 45835Rotor 115 V 45835.1Motor 230 V 45836Motor 115 V 45836.1Complete foot assembly 45840Ball bearing ring 7912 Power cord 230 V 9011.1 Motor & shaft drive sprocket 9028 Power cord 115 V 9040.1 Coupling casing + pin 9051 Power cord (Australia) 9066.1 Power cord (UK) 9067.1 Lower bearing screws - Stainless steel (3) 9902Stainless steel lower bearing screws (3) 9902.I
55
45708
45139
45630
45709 DSC
45836 DSC 8
45126
4583
1
45138
45832
1185
9028
45899
45706
45620
45710
45710
45707
45833
45161
0601
45840
45130 / 45130.I
45610
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SMX 800 DSC MIXER
Control case45712Carbon brushes (pair) 0529
Ball bearing 0601 Motor ball bearing 0602 Self-lubricating ring 0603Waterproof seal 0607O. ring 0610Toric seal 0641 Rubber washer 0760 Clips 0776 Washer & bolt for fan 0777 Wall bracket 0862 Strain relief 230 V 0950Strain relief 115 V 0950.1ID label 230 V 1098 ID label 115 V 1099 Bearing holder + seal 1185Fan housing Alu 45125Fan housing Plastic 45125.PDouble isolation plate 45126Lower bearing assembly 45130Complete stainless steel lower bearing 45130.ILower motor casing 45132 Upper motor casing 45133Stator 230 V 45135Stator 115 V 45135.1Stator screws(2) 45137Braces (4) 45138Brace screws (4) 45139Cutter blade w/ screw 45161Squeezing washers (4) 45230Handle cap (2) 45610Circuit board 230 V 45620Circuit board 115 V 45620.1Regulation circuit board 45630Fan DSC 45633DSCTop housing (orange plastic piece) 45706Screws control case set 45706.1Lower housing (orange plastic piece) 45707Handle cap protector (unit) 45708Upper motor casing 45709DSCHandle cap protector (unit) 45710Complete housing w/ screws 45711Complete control casing 230V 45712Complete control casing 115V 45712.1
Parts list Code
56
0950 9011.1
45633 DSC0529
4513
3
4513
2
4583
545
125
4512
5.P
0602
9051
0602
9902.I9902
06417912
45832
45135
45137
0776
0950.1
45706.1
45130 / 45130.I
0603 06070610
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
SMX 800 DSC MIXER
Lower housing 45831 Foot assembly w/ bearing assembly 45832Shaft & ball bearing 45833Shaft, lower ball bearing & cutter assembly 45834Rotor 230 V 45835Rotor 115 V 45835.1Motor 230 V 45836DSC8Motor 115 V 45836.1DSC8Complete foot assembly 45840Sleeve & complete handle & label & cap 45899Ball bearing ring 7912Power cord 230 V 9011.1Motor & shaft drive sprocket 9028Power cord 115 V 9040.1Coupling casing + pin 9051Power cord (Australia) 9066.1Power cord (UK) 9067.1Lower bearing screws - Stainless steel (3) 9902Stainless steel lower bearing screws (3) 9902.I
Parts list Code
57
9371
9370
9369
9367
089915
9364
9362
93639365
9366
9368
0625
9349
Gigamix
Transmission belt 0625Cover 089915Directing pulley + hub 9362Conducting pulley + hub 9363Screw set + washers for fixing the motor 9364Screw set + washers for fixing the jib 9365Screw set + washers for fixing the axle-brake 9366Screw set + washers for fixing the tube 9367Screw set + washers for fixing the cover 9368Motor 9369Screw set + nuts for fixing the steel sheet on the jib 9370Screw set for fixing the steel sheet on the motor housing
9371
Parts list Code
Jib assembling ..........................................................9349
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
58
0792
0799110633
93609361
0639
089912
9358
0640
0662
0618
089926
9356
9359
9357
9350
9351
Gigamix
Ball bearing 0633Rubber ring for upper bearing holder 0792Rubber ring case 079911Bearing holder, brace, case 9360Drive shaft 9361
Foot attachment assembling .................................. 9350
Detachable bell assembling .................................... 9351
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
Parts list Code
Toric joint 30 x 3 0618Toric joint 42 x 2.5 0639Toric joint 34 x 2 0640Waterproof lip seal 0662Lower bearing 089912Seal support 089926Blade 9356Lower shaft + bearing + coupling + clips 9357Protection bell 9358Assembling set of screw for the bell 9359
59
9373
089916
089932
9374
07919372
079912
0789 0788089921
0773
089927
9352
9350 0899530793
9077
9078
9355
9354
0793
9349
9351
93539352
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
Plain screw M8x30 0773Rubber ring for brake thrust 0788Compression spring 0789Rubber ring for brake axle 0791Handle for brake 079912Insulating sheet 089916Brake thrust 089921Interpolated sheet 089927Jib plate holder 089932Handle 9077 Handle screws 9078 Brake axle 9372Microswitch + screws 9373Pin-brake + eccentric + cam + cam axle 9374
Pin-brake assembling ........................................ 9352
Gigamix
Detachable handle 0793Ring 50x12 089953Fixed wheel + screws (unit) 9353Brake wheel + screws (unit) 9354Frame + jib holder 9355
Parts list Code Parts list Code
Additional parts
60
9380
0662
079911
0648
089958
089959
9382
0647
9359
0647
0662
9385
0639
0653
0653
9384
9381
9387
0659
9383
089972
9386
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
Gigamix
Parts list Code
Beater whisk assemblingToric seal 42 x 2.5 0639Ball bearing 0647Toric seal 86 x 2 0653Toric seal 8 x 1.9 (1) 0659Waterproof ring 0662Clip 079911Spacer rod (1) 089958Tube 089959Tube middle gear 089972Screws M6 (4) 9359Equipped upper shaft 9380Lower bearing + rings 9381Equipped output axle w/ 2 gears 9382Middle gear and shaft 9383Reduction case holder + rings 9384Output axle 9385Whisk tool 9386Complete reduction casing without whip 9387
61
0998
0748
9604
0420
9606
9605
0702
9601
9603
9607
079929
0950
9602
45902 45901 0701 45900 0707 45610
45610.S0728
45610.S0728
(0998.1)
45900.1
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
SM 4/6/8/10/12 MIXER SUPPORTS
PA 96 CITRUS JUICER - DYNAJUICER
Pulp fi lter 0420Base screws (3) 0702Pad 0748Motor screw (1) 079929Strain relief 230 V 0950Strain relief 115V 0950.1Switch 0998Switch from N°70037 0998.1Motor holder + waterproof ring 9601Power cord 230 V 9602Power cord 115 V 9602.1Power cord (UK) 9602.2Power cord (Australia) 9602.3Motor + capacitor + shaft 230 V 9603Motor + capacitor + shaft 115 V 9603.1Upper ring 9604Top orange container 9605Centrifuge cone 9606Base 9607
Tightening knob 0701 Tightening knob 0707 White knob (x2) 0728Plastic caps 45610 Plastic holder for tube 45900Orange half moon + screws + washer 45900.1 60 mm width bracket 45901 20 mm width bracket 45902Exterior stop (x2) 45610.S
Parts list Code
Parts list Code
62
0784
0758
0891
0799350799340799360883
3700
079933
0884
0885
079937
0889
1190
0785
0886
9310
07909308
93079306
05059305
9303
93019328
9327
9326
93250981
0625
932206209318
93179316
9314089915
93129311
089914
089931
0621
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
CF 2000 FOOD CUTTER
GM93 MIXER
Spare parts, check for availability
Circlips 0758 Fork break nut 0784 Wing nut 0785 Fork axle 0883 Connecting rod axle 0884 Blade axle 0885 Thickness wedge 0886 Connecting rod 0889 Knife blade 0891 Tray 1190 Fork 3700 Connecting rod concave washer 079933 Fork concave washer 079934 Brake nut washer 079935 Fork washer 079936 Blade plastic washer 079937
Motor 230 V 0505Motor 115 V 0518Waterproof seal 0620Lower or upper ball bearing 0621Transmission belt 0625Plastic handle 0790Pole 0899.14Hood pole 0899.15
Parts list Code Parts list CodeSide hood 0899.31Magnetic switch 0981Wheel with brake 9301Front hood 9303Power cord (380V) 9305Hood screw w/ plastic washer (unit) 9306Switch w/ control box 9307Switch w/ control box 9307.1Back hood 9308Motor pulley 9310Squeezing handle 9311Level adjustment handle 9312Shaft pulley 9314Foot assembly 9316Main shaft 9317Lower shaft 9318Cutter blade 9322Rubber holders (3) 9325Fork 9326Frame 9327Front wheel 9328
Parts list Code
63
3003
P2802 2814
0603
2810
2801
3002
0787
2804
0603
3007
079929
3005
3004
3001
3008
079917
0720
3006
07820905.1
09050950
0966
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate..
EM 98 ELECTRIC SALAD SPINNER
Self-lubricating ring 0603Handle screw (ea) 0720Handle 0782Friction washer 0787Motor housing screws 079917Switch 0905Switch protector 0905.1Strain relief 230 V 0950Strain relief 115 V 0950.1Power cord 230 V 0966Power cord 115 V 0967Power cord (UK) 0973Power cord (Australia) 0974Outside basket 2801Inside basket P2802Cover w/ o small cover, handle & gear 2804Axle for outside basket 2810Axle (including screw) 2814Motor housing 230V (with label) 3001Motor housing 115V (with label) 3001.1Big gear 3002
Parts list Code Parts list Code
Gear housing protector 3003Motor 230 V (+ capacitor) 3004Motor 115 V (+ capacitor) 3004.1Motor plate 3005Small gear 3006Axle, big gear 3007Filtering capacitor 230V 3008Filtering capacitor 115V 3008.1Motor screws 079929
64
1801
2801
2810
1810
P1802
P2802 1814
2814
2813
2808
2807
1804
2804
2805
9014
28112806
1812
2812
1803
2803
1809 / 2809
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MANUAL SALAD SPINNER E 10 - E 20
Parts list E 10 Code Parts list E 20 CodeOutside basket 1801 Inside basket P1802 Complete cover 1803Cover w/ o small cover, handle & gear 1804 Handle only 1809 Axle for outside basket 1810 Small cover with handle & gear 1812 Axle 1814Small cover (w/ o handle & drive gear) 2805 Perforated drive gear + pin 2806 Large gear 2807 Small gear 2808 Pin 2811 Axle for drive & small gear 2813 Set of gears (2806, 2807, 2808, 2811) 2815.1 Handle screws (4) 9014Orange plastic nuts (4) 9014.PStainless steel pins (M4x25) (4) 9014.G
Outside basket 2801 Inside basket P2802 Complete cover 2803 Cover w/ o small cover, handle & gear 2804 Small cover (w/ o handle & drive gear) 2805 Perforated drive gear + pin 2806 Large gear 2807 Small gear 2808 Handle only 2809 Axle for outside basket 2810 Pin 2811 Small cover with handle & gear 2812 Axle for drive & small gear 2813 Axle 2814 Set of gears (2806, 2807, 2808, 2811) 2815.1 Handle screws (4) 9014Orange plastic nuts (4) 9014.PStainless steel pins (M4x25) (4) 9014.G
65
2825
2810
2814
2801
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MANUAL SALAD SPINNER E 20 "SEALED COVER"
Waterproof seal 14 x 24 x 7 0644Waterproof seal 25 x 27 x 6 0645O. Ring 0646Screws TBF 3.9 x 14 079958Outside basket 2801Perforated drive gear + pin 2806Large gear 2807Small gear 2808Axle for outside basket 2810Pin for large gear 2811Axle for drive & small gear 2813Axle 2814Set of gears (2806, 2807, 2808, 2811, 2822) 2815.2Handle only 2820Small cover (w/ o handle & drive gear) 2821Output small gear 2822Equipped cover (O. Ring + Waterproof seal 2823Coupling sleeve 2824Inside basket 2825Small cover with handle & gear 2826Complete cover 2827Plate + screws (3) 2828Screws (4) 9014
Parts list Code
66
2827
2826
2823
9014
2820
2821
0644
2806
2808
2813
2807
2822
2828
0646
0645
2824
079958
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
67
3612
3600
3611
3508
351235073613
3609
3607
3610
3620
3527
3523 3614 3524 3525 3523 3526
3615
3616
36183619
3617
AC...
3608
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
DYNACOUPE
Mounting support (unit) 3507Foot 3508Suction cup (unit) 3512Self-lubricating ring (unit) 3523Circlips 18 3524Handle pin 4X18 3525Crank handle and pin 3526Cone shape gear and pin 3527Screw on button 3600Smooth cone shape gear 3607Plastic ball bearings 3608Handle (crank) assembly kit 3609Lower plate with screws (6) + self-lubricating ring 3610Upper cover casing 3611Pusher 3612Blockage sheet + screws (4) 3613Hollow axle 3614Roller axle 3615Support with screws (2) 3616Roller 3617Disc holder 3618Cutter pin 3619Axle assembly for disc holder 3620
Parts list Code
68
3528
386735103897
3506
3511
3500
3509
3567356835853586359734673468348534863497
3505
3508
3504.1 / 3504.1NG
3504.C / 3504.NG
3501
35123507
A
3517
3513 / 3513.NG
3519
3518
3515
3520
3516
3521
3527
3523 3522 3524 3525 3523 3526
A
3514.1
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
DYNACUBE
holder only
Lower grid 7 mm 3467Lower grid 14 mm 3468Lower grid 8,5 mm 3485Lower grid 17 mm 3486Lower grid 10 mm 3497Handle assembly kit 3500Chute 3501Short cutter blade complete 3504.CKit cutter blade NG (axle + gear + blade) 3504.KShort cutter blade complete - New generation 3504.NGKnife plastic holder 3504.1Knife plastic holder - New generation 3504.1NGBottom unit 3505Top unit w/ seal 3506Mounting support (unit) 3507Foot 3508Intermediate plate assembly 3509Pusher 8,5 mm / 17 mm 3510Blockage sheet and screws 3511Suction cup (unit) 3512Knife driving axle 3513Knife driving axle - New generation 3513.NGCutting grid axle + bearings 3514.1Self-lubricating ring 9/12/10 3515Self-lubricating ring C12/17/12 3516Self-lubricating ring 10/14/10 3517Self-lubricating ring C14/18/14 3518Double gear and pin 3519Right gear and pin 3520Ball bearing (unit) 3521Hollow axle 3522Self-lubricating ring (unit) 3523Circlips 18 3524Pin 3525Crank handle and pin 3526Cone shaped gear and pin 3527Clips (3) 3528Upper grid 7 mm 3567Upper grid 14 mm 3568Upper grid 8,5 mm 3585Upper grid 17 mm 3586Upper grid 10 mm 3597Pusher 7 mm / 14 mm 3867Pusher 10 mm 3897
Parts list Code
See below gearing system description
69
9072
9071
9070
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
DYNACUTTER
Ball bearing 0601Base screws (4) 9014 Coupling + pin 9051 Upper shaft assembly 9055 Complete adaptator 9070 Cover 9071 Knife assembly 9072 Dynacutter Bowl 9073 Knife cone support 9074 Inner assembly + ball bearing 9075 Bowl pivot 9076 Handle 9077 Handle screws 9078 Adaptator + seal + sticker 9080 Output shaft w/ gear 9081 Middle gear + shaft 9082 Complete adaptator base 9083 Axle 8x40 089948 Inferior blade 089949 Inferior serrated blade 089949DSuperior blade 089950 Superior serrated blade 089950D
Parts list Code
70
089950089950D
9074
089949089949D
9014
9078
9073
9076
089948
9077
9051
9055
0601
9080
90829081
9083
9014
9075
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
71
9086
9087
9088
9073
9093
0601
9090
9089
079947
089964
9084
IMPORTANT : Each spare part order must include the type and the number of the product which appears on the identifi cation plate.
MULTI-FUNCTION FOOD PREP SYSTEM - VS ATTACHMENT
Ball bearing 0601Plate screws (4) 9014Coupling casing + pin 9051Equipped upper shaft 9055Stainless steel bowl 9073Round vegetable pusher 9084Complete lid 9085 Slicing disc 9086 Ejector disc 9087Base 9088 Round shaped handle 9089Vegetable pusher 9090Lid only 9091Intermediate gear 9092Output gear + shaft 9093Plate + ball bearing 9094M8 X 16 screws 079947Hexagonal shaft 089964
Parts list Code
72
0601
0601
0601
9055
9091
9092
9094
9014
9051
9502
9095.a
9175
9172
9174
9502
9095.a
9171
9172
9174
9173
9502
9095
9096
AC
9172
9086 Slicing disc
Spare parts price list 2013 Tel. +33 (0)2 51 63 02 72Fax +33 (0)2 51 63 02 73
www.dynamicmixers.come-mail : [email protected]
MULTI-FUNCTION FOOD PREP SYSTEM - VS ATTACHMENT
Disc for French Fries 9170 Disc for cube
9086 Slicing discCoupler screws 9502Twelve-sided hub 9095Axle for slicing or grating disc 9096Disc for French FriesScrews for hexagonal hub 9502Hexagonal hub 9095.aFrench Fries disc 9175Axle for slicing disc 9172Nut 91749170 Disc for cubesScrews for hexagonal hub 9502Hexagonal hub 9095.aSlicing disc 9171Axle for slicing disc 9172Cubes disc 9173Nut 9174
Parts list Code
73
Cré
atio
n G
rap
hiq
ue
Ble
u C
om
’ Cèd
re
- 0
2 41
56
08 7
3 -
C
ho
let
-
RC
S A
NG
ERS
437
855
083
000
14 -
Mis
e à
jou
r O
cto
bre
201
2 -
Cré
dit
ph
oto
s : J
.J. B
ern
ier
- Fo
tolia
- ©
an
tish
ock
Internationaldistribution
DYNAMIC BRANCHES
NORTH AMERICAN DISTRIBUTIONTél. : +1-800-267-7794 - +1-514-956-0127Fax : +1-877-668-6623 - +1-514-956-8983e-mail : [email protected]
USA : 1320 route 9 # 1352 - Champlain, NY - 12919web : dynamicmixersusa.com
CANADA : Montreal, QUEBEC 3227 Boul. pitfi eldH4S-1H3web : www.dynamicmixers.ca
GERMANY: Eine starke Marke der Groupe NADIA GMBHRobert-Koch-Strasse 7 - 77694 KehlTel. +49 (0)7851 886 45-0Fax +49 (0)7851 886 45-32Kontakt: [email protected]
SATELLITE OFFICE:TAHITI (Polynésie Française) - Tél. : (689) 70 49 64
The Original!
FRANCE & EXPORTRCS 416 450 435 La Roche sur Yon - S.A.S au capital de 216.780 €
518 rue Baekeland - BP57 - 85290 Mortagne / Sèvre - FRANCE
Tel. +33 (0)2 51 63 02 72 - Fax : +33 (0)2 51 63 02 73
e-mail : [email protected]
www.dynamicmixers.com
Distributed by :
Top Related