Smart Home Lighting Design
Course 30 Minutes Test 20 Minutes
TIS Training Program 2012 , Rev 1.1 www.tissmarthome.com
How TIS can control lights ?• BY ON / OFF throw Relay (switch)
• By Dimming using Dimmers
• By changing color using LED Driver
• By changing effect using DMX
Some Important Lighting Terms
What is Din Rail?
Some Important Lighting Terms
What is Lighting Channel?
Lighting Channel is set of lights turning On/OFF together
Some Important Lighting Terms
How to calculate Amps?
Amp= Watt/Volt If a lamp of 100 watt in 220 Volt supply than100/220volt = 0.45 A
TIS Lighting ControlRelay (switch) ON/OFF Control
Latching mechanical Relay 8 channels each of 16 AmpsRLY-8CH-16A
Strong Relay, with mechanical emergency switch.Can be turn ON/OFF from its switch without the needs of power supplyRecommended to use at least one of this relay in each project
TIS Lighting ControlRelay (switch) ON/OFF Control
Power Relay 12 channels each of 10 AmpsVLC-12CH-10A
Good Relay, fast and low noise , can be set to be used for lighting or other controlling system. Recommended to use this relay in most of (apartments, offices, hotel) project.
TIS Lighting ControlRelay (switch) ON/OFF Control
Power Relay 4 channels each of 10 AmpsRLY-4CH-10A
Good Relay, fast and low noise , small size can be set to be used for lighting or other controlling system. Recommended to use this relay in most of (shops , Rooms, offices, etc..)
TIS Lighting ControlRelay (switch) ON/OFF Control
Addition 3 Channels each of 5 AmpsADD-3R-5A
Small size , installed behind the panel in the wall box, fast and low noise , small size can be set to be used for lighting or other controlling system. Recommended to use this relay in (small rooms)
TIS Lighting ControlDimming Control
Dimmer 6 channels each of 2 AmpsDIM-6CH-2A
It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (spot and incandescent lights in homes)
TIS Lighting ControlDimming Control
Dimmer 4 channels each of 3 AmpsDIM-4CH-3A
It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (spot and incandescent lights in homes , restaurants, shops, etc…)
TIS Lighting ControlDimming Control
Dimmer 2 channels each of 6 AmpsDIM-2CH-6A
It is very good for dimming the incandescent lamps and spot lights, It can not dim saving energy lamp or LEDs. Recommended to use this Dimmer for (big chandelier and big loads lights in homes , hotel lobby , restaurants , etc…)
TIS Lighting ControlDimming Control
LED Driver of 6 channels each of 1 Amps
LED-DRV-6CH-1A
It is very good for dimming all 12 Volt LED spot light, and LED rob light Recommended to use this Dimmer in all projects for controlling LEDIt require external power supply of 12V for LEDs
TIS Lighting ControlWhat we chose Dimmer or Relay?Its depends on load type and location
TIS Lighting ControlWe need relay ON/OFF control in
Economical projectsWCKitchenDress roomBalconyOutdoor lightsMost of roomsSome type of lights that can not dim
TIS Lighting ControlWe need dimmer control in
Family & formal living roomMaster bed roomsHotel lobbyRestaurantsMeting roomsCinema room
Wiring your Smart homeYou need to take all your lighting channels wires direct to the main Control room, using 1.5 mm and 2.5 mm
Your home lights wiringControl room
Dimmer Connection Method
Relay Connection Method
Wiring your Smart homeUse Cat5e cable to connect between all your Panels, relay and other TIS devices
Apartment Lighting ExampleWhat devices we need to control this home lights? (Each lamp is 50 Watts)
Exercise: Give the cheapest and perfect offer to satisfy your client to make this meting room smart with ON/OFF and Dimming control.
Each Lamp Is 50 Watt
Top Related