Download - Skolkovo energy eng

Transcript
Page 1: Skolkovo energy eng

Cluster of Energy Efficient Technologies

Innovations in energy efficient technologies supported by Skolkovo Foundation

Page 2: Skolkovo energy eng

MISSIONRussia possesses the largest supply of energy resources in the world. This fact allowed developing economy for a long time without sufficient investments in innovations. At the same time, our country has created unique research and development potential that allows creating world-class technologies. Significant improvement of energy efficiency resulting from the development of new technologies is one of the most important mechanisms for turning Russia into a country with strong competitive innovation-based economy.

DEVELOPMENT PRIORITIES

Energy Efficiency Cluster supports the development of the newest technologies of energy generation, transmission and accumulation, enhancement of consumption efficiency, “green” energy. Such technologies both increase energy efficiency of the economy and become a base for emerging of new hi-tech Russian companies. Their commercial success will stimulate innovative economy development.

KEY OBJECTIVES: • Searching for innovative ideas and teams that

are able to perform the full cycle of innovation development, from research to commercial success

• Stimulating foundation of corporate R&D centers targeted to energy efficient technologies

• Involving scientists into solving actual technical problems facing the business, stimulating applied research

• Providing the most comfortable administrative environment and support for the innovators’ companies

• As a result, enhancing competitiveness of Russian energy efficient technologies in the world market

PARTICIPANTSOur cluster is an international community of the outstanding researchers and entrepreneurs, who generate innovative ideas and turn them into commercially successful products and technologies in the energy efficiency sector. Currently our cluster unites more than 130 innovative companies. The number of those who wish to join us is growing day by day; therefore we thoroughly choose our members and provide support only to the companies that carry out the most innovative R&D with high potential for commercialization. Residents of the Cluster receive various kinds of support from the Skolkovo Foundation and its partners: grants up to 300 mln. roubles, significant tax benefits, venture investments, access to the newest equipment, support of the global well-known research institutes and leading technological companies. Moreover our residents will get the opportunity to become a part of the future “Skolkovo” innovation center.

Cluster of Energy Efficient Technologies

Page 3: Skolkovo energy eng

Network pneumatic wave power generation plant with efficiency of up to 60% on waves from 1 meter high

KD Technology ZAO

THE ESSENCE OF INNOVATION• Array of plastic floats with pneumatic air com-

pressors connected by lever arms• Energy of each wave impacts floats• Relative motion of floats drives air compressors• Compressed air is produced and transmitted to

the shore, where electric power is generated

COMPETITIVE ADVANTAGES • Power generation on waves from 1 meter high,

with efficiency up to 60% • Competitive wave power generation technologies

provide efficiency up to 45% on waves not less than 5 meters

• Costs of electricity is as low as $0.17/ kW∙h as a result of cheap polymeric structures use

• Reduced maintenance costs due to on shore electrical equipment

PROJECT PRODUCTWave power plant

CURRENT PROJECT STAGE• Proof of concept by University College of Cork

(Ireland)• Efficiency of 54% proven by Swansea University

(UK)• 1:9 skale model is tested in a pool in Cork, Ireland

FINISHED PRODUCT AVAILABILITY• Offshore lab prototype – Q2 2013 • 1 MW plant protorype – 2014

KEY MARKETSUnited Kingdom, Japan, the United States, China and other countries with access to the sea

INTELLECTUAL PROPERTY• CRDF Global - Best 2011 Innovation Idea• Cleantech Connect, One to watch 2011 - 30 most

promising European start-ups

PROJECT NEEDS• Venture investments in 2012• Strategic investor in 2013• Pilot implementation sites for prototype models

REQUIRED FINANCING • 2012 : RUB 28.5 million• 2013-2014 : RUB 220 million

CONTACTS: Moscow, +7 (926) 170-01-17 www.vertlabs.org, [email protected]

Energy generation

Page 4: Skolkovo energy eng

Production technology of energy-efficient Spin-Cell heat exchangers for heat supply systems used in the housing and utilities sector

Energotekhnika LLC

CONTACTS: Moscow, Zelenograd, +7 (495) 972-38-44, [email protected]

THE ESSENCE OF INNOVATION• Cell heat exchangers with swirling-flow heat

exchange tubes (Spin-Cell) • Cell structure of tube bundle without tube plate• Space between tubes is filled with hollow helical

fins

COMPETITIVE ADVANTAGES• Heat transfer coefficient is 1.5 to 2.5 times

greater than that of plate, and shell-and-tube heat exchangers

• Hydraulic resistance lower than that of plate heat exchangers

• Decreased scaling and scum• Light and compact design, resistant to thermal

and hydraulic impact• Cost and maintenance expenses could be

decreased by 15-30%

PROJECT PRODUCT • Heat exchangers for heating systems (500

Mcal/h) and hot water supply (200 Mcal/h)• Tool for calculating swirling flows (combination of

software and hardware)

CURRENT PROJECT STAGE • Pilot implementation• Completed: R&D, working design documentation,

pilot model manufacture and testing

FINISHED PRODUCT AVAILABILITYQ1 2013

KEY MARKETS Housing and utilities ($300 M), energy production sector, oil and gas, chemical, food processing and ship building industries

INTELLECTUAL PROPERTY Method for heat exchanger manufacturing is protected with 3 Russian patents

PROJECT NEEDS • Pilot implementation on sites• Financing for launch of manufacture

PROJECT FINANCING• Grants received – RUB 2.5 million• Own funds – RUB 3 million

REQUIRED FINANCINGRUB 18.2 million

Energy generation

Page 5: Skolkovo energy eng

Technology for manufacturing cost-effective and clean gas-fired mini power stations based on Solid-Oxide Fuel Cells

CONTACTS: Moscow, www.nf-venture.ru, [email protected]

THE ESSENCE OF INNOVATION• Innovative cost-effective solid-oxide fuel cells

(SOFC) production technology which is:– Sustainable technology– Cost-effective technology– Scalable

COMPETITIVE ADVANTAGES• Projected cost of SOFC production is 2-3 times

less than competitive technologies• Wider power-range of developed power stations

(0,5 – 25 kW, compared to 0,5 – 3 kW)• Simple and rugged design• Soundless clean tech generator with levelized

costs of electricity of $0.2 per kW∙h

PROJECT PRODUCT• Power station manufacturing technology• SPVs for power stations production in US, EU,

Japan

CURRENT PROJECT STAGE• Power station lab prototype was designed• Cost-effective SOFC manufacturing technology

was developed

FINISHED PRODUCT AVAILABILITY• Lab prototype devices – Q3 2013• Full-scaled prototypes – late 2014• Pilot production - 2015

KEY MARKETS• Households, small and mid-business, oil-and-gas

companies, utilities, heavy vehicles• Potential markets: US, Middle East, Japan, EU,

Russia, South-Eastern Asia

INTELLECTUAL PROPERTY• Cost-effective SOFC manufacturing technology

patented in Russia, US• Patent applications for power station designed

planed in Russia, US, Japan, EU

PROJECT NEEDS• Strategic partner and investor for production and

implementation in 2014• Technological partner in 2015• Pilot implementation sites for prototypes

PROJECT FINANCINGOwn funds $1,9 million

REQUIRED FINANCING Lab prototype – 0,7 millionFull-scaled prototype – $1,1 millionPilot production – $2 million

NF CJSC

Energy generation

Page 6: Skolkovo energy eng

Technology for the production of zirconium dioxide-based electrolytic membranes to manufacture energy-efficient high-temperature solid oxide fuel cells

GPI Innovation Center Co Ltd.

CONTACTS: Moscow, Prokhorov General Physics Institute of the Russian Academy of Sciences, +7 (499) 503-81-65, [email protected]

THE ESSENCE OF INNOVATION• Development of solid oxide fuel cells (SOFC)

electrolyte based on stabilized monocrystals of zirconium dioxide (instead of ceramic elements)

• Processing of electrolytic membranes with new directional crystallization methods in the condi-tions of HF-melting, chemical and mechanical polishing and impact with intensive laser pulses

COMPETITIVE ADVANTAGES• New electrolyte has greater ion conduction and

strength, which increases power output and extends SOFC service life:

– Power density up to 1 W/cm2 –1.5-2 times greater than that of ceramic electrolytes

– Service life of 3-5 years, which is up to 5 times greater than that for analogues

– SOFC price of USD 350-400 per 1 kW, which is 1.5-2 times lower than for analogues

PROJECT PRODUCTMethod of SOFC electrolyte production with ion conduction of at least 0.02 (Ohm*cm)-1 at 730ºC, with SOFC efficiency of 80%, and service life of up to 5 years

CURRENT PROJECT STAGE• Batch of monocrystals was obtained for electro-

lyte production• Electrolytic membrane treatment technologies

were developed

FINISHED PRODUCT AVAILABILITY• Sample membrane – Q2 2013• SOFC prototype – 2014-2015

KEY MARKETS• Power sources using different fuels (hydrogen,

natural gas, synthetic gas)• Estimated SOFC market will reach USD 1.6 billion

by 2016 and will exceed USD 3.4 billion by 2021

INTELLECTUAL PROPERTYAt least 3 patent applications for electrolyte produc-tion methods and technology are expected to be filed in Russia, USA, Canada, EU, Japan, China

PROJECT NEEDS• Strategic partner and investor• Pilot implementation sites for prototypes, starting

from 2014

REQUIRED FINANCING • Development of prototype and membrane produc-

tion technology: RUB 30 million• Development of prototype SOFC based on mem-

brane: RUB 200 million

Electrolyte    

SOFC  

1  year  

Energy generation

Page 7: Skolkovo energy eng

Solid organic waste recycling power plant with plasma gasification method

CONTACTS: Moscow, +7 (495) 662-47-34, www.plasmahit.ru, [email protected]

THE ESSENCE OF INNOVATION• Use of low temperature plasma in the process of

gasification of solid household waste• Considerable increase of solid waste recycling

temperature by adding extra plasma energy, which results in the process acceleration

• The share of ballast additives decreases in the resulting gas, and the share of heat valuable components increases to provide high efficiency generation

COMPETITIVE ADVANTAGES• Two times less CAPEX per ton of recycling

capacity• Generates 20-30% more electric power per ton of

recycled solid wastes• Extra thermal energy is generated

PROJECT PRODUCTPilot power plants

CURRENT PROJECT STAGEPrototype developed

KEY MARKETSDistributed power generation

PROJECT NEEDS• Strategic partner• Pilot implementation sites for prototypes

Plasma chemical Technologies LLC

ОТХОДЫ

ВОЗДУХ

ВОЗДУХ

ВОЗДУХ

ВОЗДУХ

ВОЗДУХ/ПАР

ПРОДУКТ-ГАЗ

ШЛАК

ВОДА

ВОДА

ВОДА

ЩЁЛОЧЬ

ВАТМОСФЕРУ

1 3 5 6 7

4

2

1 – Reactor-gasifiier 2 – Plasma generator, 50 kW 3 - Afterburner 4 – Plasma generator, 10 kW

5 – Spray-type scrubber 6 – Packed scrubber 7 – Exhaust fan

Energy generation

Page 8: Skolkovo energy eng

Innovative small and medium sized wind generators on the basis of axis turbine, guide unit and irregular shape deflector

CONTACTS: Saint Petersburg www.optiflame-spb.ru, [email protected]

THE ESSENCE OF INNOVATIONNew aerodynamic model of wind generator that combines both safety and increase efficiency

COMPETITIVE ADVANTAGES• Efficiency factor of the developed wind generator

is 50-60%• External guiding unit ensures extra safety and

increase of efficiency factor• Small size and weight of blades, direct gearing

to the generator, air tightness of the structure provide for simplicity and dependability of the system

• Safe use at the rooftops

PROJECT PRODUCT• Licensing of production technology• Production of wind-generatios

CURRENT PROJECT STAGETest prototype was constructed

KEY MARKETS• Distributed clean power generation• Off-grid regions of South-Eastern Asia,

Russia, etc.

PROJECT NEEDS• Strategic investor• Production partner

Optiflame Solutions LLC

Energy generation

Page 9: Skolkovo energy eng

Photovoltaic cells with increased efficiency based on self-organized quantum dots

CONTACTS: St. Petersburg, Alexey Nadtochy, +7 (921 )903-61-09, [email protected]

THE ESSENCE OF INNOVATION• Development of multijunction solar cell using the

InGaAs/GaAs quantum dots (QD) inserted in one of its subcells

• The use of QDs provides more effective match of the subcells absorption spectra for given system of materials and allows to increase their efficiency

• Insertion of InGaAs based QDs in GaAs subcell results in the increase of the spectral range of sensitivity for this subcell up to 1.35 μm

COMPETITIVE ADVANTAGES• Increase efficiency of PV up to 3-4%• Decrease PV energy for energy consumers to 2,2

RUB per kWh• Lower weight of PV cells

PROJECT PRODUCT• Licensing of created intellectual property• SPVs for solar cells production with industrial

partner

CURRENT PROJECT STAGE Lab prototype developed: unijunction GaAs solar cell with QD array

FINISHED PRODUCT AVAILABILITYMultijunction solar cells manufacturing technology with increased efficiency – Q2 2013

KEY MARKETS• Distributed clean power generation in Russia,

Spain, Germany and other countries• Power generation for space crafts

INTELLECTUAL PROPERTY• QD high density array organization technology• Design of solar panels based on PV cells with QD

array

PROJECT NEEDS• Strategic partner in 2013• Pilot implementation sites for prototype models

Solar Dots LLC

GaInP subcell

GaAs subcell

Tunnel diod

Array of quantum dots

Ge subcell in substrate

Tunnel diod

Energy generation

Page 10: Skolkovo energy eng

Wind electricity-generating machine with directional flow wind turbine using low-speed innovative power generator

CONTACTS: Dolgoprudniy, Moscow Region +7 (495) 408-21-83, www.ifmagma.ru, [email protected]

THE ESSENCE OF INNOVATION• Design of the wind machine with directional flow

wind turbine provides increase in wind flow power generation

• Developed and patented low-speed power generator design that is simple and robust

COMPETITIVE ADVANTAGES• Two times shorter and lighter blades compared to

traditional fans• Estimated air stream usage coefficient is 40-60%• Wind turbine can function at air stream speed up

to 60 km/h• Efficiency of the generator is up to 94% in a wide

range of rotation frequencies and load rates• The land area for the wind farm (including the

security zone) will be almost 10 times smaller than that of traditional wind farms

PROJECT PRODUCTLicensing of production technology

CURRENT PROJECT STAGEPrototype development

KEY MARKETSDistributed clean power generation

PROJECT NEEDS• Strategic investor• Pilot implementation sites for prototypes

Magma Innovation Firm LLC

Energy generation

Page 11: Skolkovo energy eng

CONTACTS: 5 Leningradskoye Highway, Moscow, Russia, 125080 +7 (499) 158-46-51, +7 (495) 789-59-58,[email protected]

Flameless combustion technology use in infrared heaters

THE ESSENCE OF INNOVATION• New chemical composition: design and

technology for production of ceramic nozzles for boilers

• New technical solutions to ensure the even distribution of the thermal fields

• Effective use of different fuel types (natural gas, associated gas and liquefied, synthesis gas, biogas, hydrogen)

COMPETITIVE ADVANTAGES• Substantial decrease of negative environmental

impact (сontent in the product of combustion – NO < 40 mg/m3 and CO2 < 50 mg/m3 with the excess air coefficient close to 1)

• Reduction of the fuel consumption due to the decrease of heat losses and precise setting of temperature gradient

• Extension of heat exchange equipment service life due to uniform distribution of heat fields and elimination of heat-stressed areas

• Simple technological design, low production cost CURRENT PROJECT STAGELaboratory prototype developed

FINISHED PRODUCT AVAILABILITY Q4 quarter 2014

PROJECT NEEDS• Strategic partners • Financing

Russkiye Kotly LLC

Energy generation

Page 12: Skolkovo energy eng

Asymmetrical electrochemical capacitors with water electrolytes and energy storage system based on such capacitors

ELTON CJSC

CONTACTS: Troitsk, Moscow Region +7 (4967) 51-04-57, www.elton-cap.ru, [email protected]

THE ESSENCE OF INNOVATION• High-power Ni-C pulse capacitors• High-capacity Pb-C capacitors

COMPETITIVE ADVANTAGESHigh-power Ni-C capacitors:• High density of energy• Operating temperatures from -50 to +65ºC• No toxic materialsHigh-capacity HES-capacitors: • The number of charge-discharge cycles is times

greater than for other modern batteries • Energy density is comparable to those for

batteries (~40 W∙h/kg)• Are capable to compensate short failures of up

to 1 min in the power supply systems (95% of failures)

PROJECT PRODUCT• Energy storage systems • Licensing of capacitor manufacturing technologies

CURRENT PROJECT STAGE Prototype development and testing

FINISHED PRODUCT AVAILABILITYQ3 2013

KEY MARKETS• Reliable start for trucks and buses: start-stop

systems, recuperation systems• Energy accumulation in the power supply systems

for compensation of misbalances, increasing the reliability of renewable energy generators

INTELLECTUAL PROPERTY• Ni-C capacitor technology • Pb-C capacitor technology

PROJECT NEEDSFeedback from prospective customers to define specific requirements for storage systems

PROJECT FINANCINGSkolkovo grant – RUB 251 million

Energy accumulation

Page 13: Skolkovo energy eng

Innovative energy-efficient shunting locomotive SinaraHybrid with a smart asynchronous hybrid drive

STM Innovation Development Center LLC

CONTACTS: Moscow- Yekaterinburg– Lyudinovo; +7 (343) 310-33-00 [email protected]

THE ESSENCE OF INNOVATION• Asynchronous hybrid motive power with IGBT

invertors, Li-ion batteries and ultracapacitor• Microprocessor-based locomotive energy control

system was developed• GPS-GLONASS-based track prediction system• Innovative design of rolling bearings• More than 20 novel technical solutions

COMPETITIVE ADVANTAGES• Fuel consumption in shunting operations reduced

by up to 30% • Exhaust emission reduced by up to 55%• Life-time use cost is lower by 18% • Locomotive may be used in closed workshops

PROJECT PRODUCT • Certified pilot model • Sale of manufacturing licenses

CURRENT PROJECT STAGE• Prototype developed • Pilot model tests started

FINISHED PRODUCT AVAILABILITY Certification to start from Q4 2012

KEY MARKETSJSC Russian Railways – 10.5 thousand locosIndustrial enterprises – 7 k - 8 thousand locos

INTELLECTUAL PROPERTY • Three patents for utility model • Patent for industrial model • Patent search is being conducted in the CIS, East

European countries and the United States

PROJECT NEEDS Access to foreign markets

PROJECT FINANCING• Skolkovo grant – RUB 56 million• Co-investor – RUB 60 million

Energy accumulation

Page 14: Skolkovo energy eng

Asymmetrical graphene ultracapacitor based on non-water electrolyte with enhanced energy density that is 4-6 times higher than that of analogues

CONTACTS: Moscow, +7 (495) 939-71-93, [email protected]

THE ESSENCE OF INNOVATION• Highly-porous carbons are the most promising

materials for electrodes of energy storage devices• Authors have know-how for cheap production of

graphene• Use of a non-water electrolyte will make it

possible to increase electrode voltage from 2 to 4-5 V, and store 4-6 times more energy proportionately to squared voltage value

• Electrolyte production technology based on polymerized nanoparticles with ionic and electronic conduction

COMPETITIVE ADVANTAGES • Power density from 50 kW/kg, energy density

50 -100 W∙h/kg, which is comparable to modern batteries

• Several minutes needed for charging• Service life is 10 times longer than that of lithium-

ion batteries

PROJECT PRODUCTLicensing of supercapacitor production technology for various applications

CURRENT PROJECT STAGEModel of symmetrical graphene/graphene ultracapacitor based on water electrolyte was created, with energy density of 17 W∙h/kg, power density of 2 kW/h

FINISHED PRODUCT AVAILABILITY• Prototype with non-water electrolyte 25-30 W∙h/

kg – Q1 2013• Ultracapacitor cells 50 W∙h/kg, 5 kW/kg – Q4 2014

KEY MARKETS• Energy storage system for electric vehicles• Large energy storage systems for electric grids• Energy storage devices for renewable energy

sources

INTELLECTUAL PROPERTY• Graphene production know-how• Electrolyte production know-how

PROJECT NEEDSStrategic partner and investor

Kongran LLC

Kongran    

Energy  den

sity,  W

h/kg  

Power  den

sity,  kW/kg  

Energy accumulation

Page 15: Skolkovo energy eng

Power and pulse acid ultracapacitors with high performance that utile nanomaterials, efficient designs and advanced technologies

CONTACTS: Korolev, Moscow Region, +7 (495) 974-98-58, www.teemp.ru, [email protected]

THE ESSENCE OF INNOVATION• Development of advanced acid ultracapacitors

(UC) of following types: – High-capacity (for energy sector) – High-power pulse (for electric vehicles)

• Development of nanoporous activated carbon materials for electrodes, with pores sized to increase specific internal surface area up to 1.5 times and highly efficient double electric layer

• Use of composite materials for electrodes and current collectors

• Electrodes combined with current collectors to reduce weight and resistance

COMPETITIVE ADVANTAGES• High-capacity UC: power density 1 kW/kg and

energy density 23 W∙h/kg at cost of $1 per Wh• High-power pulse UC: power density 5 kW/kg,

energy density 3.5 W∙h/kg at cost of $20 per Wh• These parameters will provide the solutions for

accumulation in grids and hybrids

PROJECT PRODUCT• Prototype supercapacitor cells and modules • Supercapacitor manufacturing technology

CURRENT PROJECT STAGE• Successful experience with the development

of previous generation ultracapacitors (energy density 15.4 W∙h/kg) and their use for electric vehicles

• Materials and electrodes are being developed• Development of cells was started

FINISHED PRODUCT AVAILABILITY• Prototype ultracapacitor cells – Q4 2012• Power ultracapacitor modules – Q4 2013• Pulse ultracapacitor modules – Q4 2013

KEY MARKETS• Energy storage systems for electric vehicles • Large energy storage system in electric grids• Energy storage system for renewable energy

sources

INTELLECTUAL PROPERTY7 patent applications are expected to be filed with respect to materials and design of supercapacitors

PROJECT NEEDS• Pilot implementation sites for testing prototype

models in the energy sector• Consumers of supercapacitors in automotive

industry

PROJECT FINANCINGSkolkovo Grant – RUB 46.5 million

TEEMP LLC

Energy accumulation

Page 16: Skolkovo energy eng

Basic technology and design for the creation of lithium-air rechargeable chemical capacitors with energy density exceeding 1 kW∙h per 1 kg of battery weight for mobile applications and electric vehicles

CONTACTS: Moscow, Zelenograd, +7 (499) 732-93-38, [email protected]

THE ESSENCE OF INNOVATIONUnlike today’s most popular lithium-ion batter-ies, lithium-air batteries are based on reduction of atmospheric oxygen at the cathode

COMPETITIVE ADVANTAGES• Extremely high capacity of lithium-air batteries:

at least 5 times greater than that of lithium-ion batteries

• Theoretical estimations of energy density of lithium-air batteries are comparable to energy content of gasoline (approximately 10 kW∙h/kg)

• Unlimited reserves of oxidizer (atmospheric oxygen)

PROJECT PRODUCT• Target parameters per 1 kg of battery weight:

– Energy density: 1-3 kW∙h – Power density: 1.5 kW

• Life cycle: not less than 100 charge-discharge cycles

CURRENT PROJECT STAGEDevelopment and testing of prototype cells

FINISHED PRODUCT AVAILABILITY • Prototype small-sized cells – Q3 2012• Industrial model of batteries – 2013-2014

KEY MARKETS• Sales of lithium-air batteries are expected to triple

by 2020 to $30 billion, which is connected first of all with the growth of electric vehicle and energy markets.

• Forecasted growth is impossible without a drastic increase of energy density of batteries used and/or decrease of their prices

PROJECT NEEDSStrategic partner and investor for production and implementation

PROJECT FINANCING• Skolkovo grant – RUB 30 million• Co-investor – RUB 10 million

FM Lab LLC

electrons  

load  

Lithium  anode  

Separator  

Electrolyte  

Porous  cathode    

Pos.  electrode  

Neg.  electrode  

Membrane  from  porous  fluoroplas=c  

Body  of  anode  chamber  filled  with  electrolyte    

Gas-­‐=ght  plate  of  solid  electrolyte    

Energy accumulation

Page 17: Skolkovo energy eng

New generation of contactless switches and current limiters for electric grids and for application in housing and utilities sector

CONTACTS: Troitsk, Moscow Region +7 (916) 601-12-64, [email protected]

THE ESSENCE OF INNOVATION• Contactless switches and current limiters (CSCL)

based on 1 μm thin nanostructured carbon films applied on quartz substrate

• If critical current is exceeded, transition from metallic state to isolator occurs within ~0.1 millisecond

• Devices for 100A, 1000A electric distribution grids housing and utilities applications up to 63A are developed

COMPETITIVE ADVANTAGES• Significantly faster than inertia switches• Enhanced efficiency and reduced losses caused

by heating of elements• Cost similar to inertia switches and dozens of

times lower than that of superconducting current limiters

• No mechanical contacts or switches prevent voltaic arc or bounce, thus increasing fire safety and interference protection

PROJECT PRODUCT• Prototype CSCL for household consumers (up to

100 A) and grid companies (1000 A) • Licensable CSCL production technology

CURRENT PROJECT STAGELaboratory sample of CSCL with critical current of 1A was developed

FINISHED PRODUCT AVAILABILITY • Prototype household devices – Q4 2013 • Prototype grid devices – Q1 2014

KEY MARKETS• Switches for household use, housing and utilities

sector • Current limiters, instead of high-T ceramic

superconductors for grid companies, housing and utilities sector

NTELLECTUAL PROPERTY Patents for technology of production of contactless current limiters and their incorporation in an electric circuit are received

PROJECT NEEDS• Strategic partner and investor • Pilot implementation sites for prototype models,

starting from 2014• Testing and certification site

Current Limited LLC

Energy transmission

Page 18: Skolkovo energy eng

Technology for power cables protection with quasi-crystalline Al-Cu-Fe coating for enhanced icing and corrosion resistance

Center of Micromechanics and Modern Materials LLC

CONTACTS: Moscow, +7 (916) 110-13-56, [email protected]

THE ESSENCE OF INNOVATION• Use of Al-CU-Fe quasi-crystals for creating a

protective film of 20 μm thick on the surface of non-insulated cables

• Development of technology for continuous manufacture of cable with a stable coating of predetermined thickness

COMPETITIVE ADVANTAGES• Enhanced performance of non-insulated class A

and AS cables: – Protection of icing due reduced wettability

– Corrosion resistance due to protective properties of coating

• Grid operating costs reduced by up to 50% without modifications to cable laying technology

• Cable production cost increased by 5%

PROJECT PRODUCTTechnology for applying continuous quasi-crystal coating during production of cables

CURRENT PROJECT STAGE• Quasi-crystal material production technology is

developed• Preliminary prove that quasi-crystal coating

reduces friction coefficient and wetting

FINISHED PRODUCT AVAILABILITY Q2 2013

KEY MARKETSSections of power transmission lines subject to icing, territory with winter temperatures about 0ºC

INTELLECTUAL PROPERTYIt is expected to file not less than 2 patent applications for protective quasi-crystal cable coating and a coating application device

PROJECT NEEDS• Strategic partner and investor• Pilot implementation sites for prototypes, starting

from 2013

REQUIRED FINANCING Development of technology for continuous application of quasi-crystal coating during production of cables: RUB 18.4 million

Energy transmission

Page 19: Skolkovo energy eng

The high-performance cable for energy distribution with a nanocomposite core from basalt and glass fiber

CONTACTS: Cheboksary, +7 (8352) 30-82-10, [email protected]

THE ESSENCE OF INNOVATION• New type of polymeric binding, nanocomposite

materials for core • Use of nanotechnology will make it possible to

use available raw materials (basalt and glass fiber instead of expensive carbon fiber) as a basis

• Development of a new type of loom for increasing electrical conductivity and performance in extreme conditions

COMPETITIVE ADVANTAGES• Energy losses reduced by 30-40% comparing to

the steel and aluminium cables – lower heating intensity, cable has reduced heat radiation

• Possibility to use lower power transition line supports with increased span

• Cable costs $2500/tons, which is 2-2.5 times lower than analogues ACCC (U.S.)

PROJECT PRODUCT• Core production technology• Wire production technology

CURRENT PROJECT STAGE • Basic R&D completed with Karpov Institute of

Physical Chemistry• Cooperation with Research Institute of Cable

Industry, Top Glass S.p.A., GEMA, Galen, Karpov Institute of Physical Chemistry

FINISHED PRODUCT AVAILABILITY Q3 2013

KEY MARKETS• Russian and foreign grid companies• Distribution and grid facilities

INTELLECTUAL PROPERTYMore than 3 patent applications for core production technology and design of a cable with a composite core will be filed

PROJECT NEEDS• Strategic partner for production and

implementation• Pilot implementation sites for prototypes, starting

from 2013

Composite Electro LLC

Energy transmission

Page 20: Skolkovo energy eng

Environmentally friendly plasma-pulse technology for increasing oil and gas recovery at horizontal oil and gas (shale) wells

CONTACTS: BP “Rumyantsevo”, Kievskoe Shosse, Moscow +7 (495) 225-62-40, [email protected]

THE ESSENCE OF INNOVATION • Technology for plasma-pulse treatment of mature

vertical wells have been developed and proven efficient

• A few hundreds of powerful discharges are made along the well production interval with the dense plasma generation.

• Elastic waves clean the bottomhole zone and spread deep into the formation thus cleaning perforation intervals

COMPETITIVE ADVANTAGES• Efficient, simple bottomhole treatment• Safe work under close aquifer bedding • High-accuracy selective impact • Complete environmental safety• Possibility of repeated use

PROJECT PRODUCTWell treatment service or licensing

CURRENT PROJECT STAGE• Technology for vertical wells is already available • Technology for horizontal wells is being developed

KEY MARKETS:All kinds of vertical and horizontal wells (including mature)

PROJECT NEEDS• Strategic investor• Testing site

NOVAS Sk LLC

Example of application

Treatment    

January  February  March  April            May            June              July  August          September  

Qoil,  t/day   Water  cut,  %  Qliquid,  m3  

Oil and gas – upstream

Page 21: Skolkovo energy eng

High-precision monitoring system for hydraulic seam fracturing that uses seismic arrays observations on the surface

CONTACTS: Moscow, pr. Vernadskogo, 101 str. 1, office #303 +7 (495) 434-36-38

THE ESSENCE OF INNOVATION• Monitoring system uses data from the seismic

sensors deployed on the surface immediately above the injection well

• The developed technology allows to detect, locate and interpret microseismic events and their attributes even if the characteristic signal on the surface is completely masked by natural and technogenic noise

COMPETITIVE ADVANTAGES• Substantial decrease of the monitoring cost and

increase of the monitoring coverage comparing with the borehole monitoring

• Technology overcomes the existing surface monitoring methods’ disadvantages (suppression of man-made noise, location and characterization of complex sources)

PROJECT PRODUCTService for monitoring genesis and development of fracturing during hydraulic stimulation of oil and gas recovery

CURRENT PROJECT STAGEProduct Development (Mathematical algorithms are substantially developed and tested based on the data from the frac sites in Russia, USA and Canada)

KEY MARKETSUSA (more than 20 000 fracs per year), Europe, China, Russia

PROJECT NEEDS• Investments• Test sites

SYNAPSE LTD

Number of seismic sensors can be dramatically reduced and accuracy of monitoring enhanced due to implementation of the technology The example of source recovery from noise in data processing stages 1 to 4

Precise location of complex source

Complex sources generate errors

while implementing traditional surface

monitoring methods

High level of seismic noise

during hydrofrac

production

Oil and gas – upstream

Page 22: Skolkovo energy eng

Software for online modeling and visualization of oil fields

CONTACTS: 47, Nakhimovskiy prospekt, Moscow, Russia +7 (499) 129-35-00, [email protected]

THE ESSENCE OF INNOVATION• Fully interactive visualization allows for online

monitoring and modeling at runtime• The software uses supercomputer cluster

technologies and most up-to-date architecture• Powerful numerical algorithms

COMPETITIVE ADVANTAGES• Full runtime interactivity on the field model• Easy integration to intellectual field systems• Unique tools for the modeling

PROJECT PRODUCTInteractive petroleum reservoir simulator tNavigator

CURRENT PROJECT STAGE• Commercialization• Key customers: TNK-BP, GAZPROM NEFT,

ROSNEFT, GAZPROM, NOVATEK, SINOPEC (China), PIONEER NATURAL RESOURCES (USA)

• Company offices in Moscow and Houston (USA)

KEY MARKETSMajor regions of petroleum development worldwide

PROJECT NEEDSNew clients

PROJECT FINANCING• Skolkovo grant – $1 million• Intel Capital Finance

Rock Flow Dynamics LLC

Oil and gas – upstream

Page 23: Skolkovo energy eng

Submersible electric plunger pump with linear motor, submersible converter and single power line

CONTACTS: Konstantin Skitkin, +7 (926) 277-01-93, [email protected]

THE ESSENCE OF INNOVATIONCombination of plunger pump with linear motor and submersible converter

COMPETITIVE ADVANTAGES• Increase of the time between repairs

by at least 10% • At least 1.5-2.2 times increase in efficiency

compared to existing models• Decrease of the service cost by at least 10%

CURRENT PROJECT STAGEPrototype pump development

FINISHED PRODUCT AVAILABILITYQ3 2014

KEY MARKETS• Russia: Volga Region and Western Siberia • CIS: Kazakhstan• Non-CIS countries: the USA and North Africa

countries

INTELLECTUAL PROPERTY• Active part of submersible linear electric motor• Hydraulic protection of the electric motor• Submersible inverter• Original functional diagram of the plant

PROJECT NEEDSInvestments – USD 1 million

NGKT LLC

Oil and gas – upstream

0.0

10.0

20.0

30.0

40.0

50.0

60.0

Общий расчетный КПД

55,9 %

36,5 % 25,7 %

Coefficient of efficiency

Operational benefit - coefficient of efficiency = 55.9%

УЭПН УШГН УЭЦН

$229 млн./год

$495 млн./год

$192 млн./год

Economic effect- $912 mln/year

Снижение стоимости ремонта скважин

Снижение стоимости капиталовложений

Увеличение наработки на отказ

mln/year   mln/year

mln/year

Decrease of the well repair costs Decrease of the capital investments Increase of the time between failures

Electric  submersible  pump  plant      Bo4om-­‐hole  pump  plant    Electric  centrifugal  pump  plant  

Total  design  coefficient  of  efficiency  

Page 24: Skolkovo energy eng

Thermal gas method of development of the oil-and-kerogen bear-ing deposits of Bazhen (reserves estimated at 30-40 billion tons)

CONTACTS: [email protected]

THE ESSENCE OF INNOVATION• The proposed thermal gas method is intended for

efficient oil and gas resources recovery out of the rocks of Bazhen

• Oil recovery from the drained zones increases from 3-5% to 50-60% and more due to the in-site generation of efficient displacement miscible gas agent

COMPETITIVE ADVANTAGES• Availability of working agents and low cost• Use of the natural power engineering, in

particular, of increased formation temperature (above 60-65 °С) assures the spontaneous initiation of intra-formational oxidative processes and integration of the thermal and gas treatment

PROJECT PRODUCTInnovative technological complex for development of nonstandard oil-and kerogen bearing deposits

CURRENT PROJECT STAGETechnology development

FINISHED PRODUCT AVAILABILITY2015

KEY MARKETS• Bazhen deposits in Russia – 30-40 billion tons• Tight oils in America and Europe

RITEK Innovation Center

Injec&on  well  Air  injec&on  compressor  

Oil  gathering  and  treatment   Produc&on  well  

Zone  of  intra-­‐forma&onal    oxida&ve  processes                                Heat  penetra&on  zone  Miscible  displacement  

   zone      

Fracturing    

Air-­‐and-­‐water  mixture  

Addi&onal  oil  inrush  from  matrix  

Matrix  (non-­‐drained  zone)  

Drained  zone  

Oil and gas – upstream

Page 25: Skolkovo energy eng

Mini-GTL for processing associated gases into synthetic oil

CONTACTS: Building 3, 7 Znamenka st., Moscow; [email protected]

THE ESSENCE OF INNOVATION• New partial oxidation reactor and a catalyst• Microchannel reactor and Fischer-Tropsch catalyst

(Oxford Catalysts)• Marketable product suitable for transportation

jointly with mineral oil

COMPETITIVE ADVANTAGES** Comparison with existing technologies

– 8х CAPEX decrease– 2х OPEX decrease– 10х specific capacity growth• Profitable mini-GTL plant (with 50 million

nm3/year capacity) at small scale deposits

PROJECT PRODUCT• Mini-GTL plants• IP licensing

CURRENT PROJECT STAGE“Mini-GTL-10” pilot plant construction stage with 10 million cubic meter/year capacity

FINISHED PRODUCT AVAILABILITY4Q 2014

KEY MARKETS• Small scale remote deposits:

– Key segment in Russia - > USD 5 billion – Russia in total – > USD 10 billion – Global market – > USD 20 billion

PROJECT NEEDS• Investments - USD 12 million• Pilot site

PROJECT FINANCING**:Skolkovo grant – USD 5 million

FINANCING REQUIREDPrivate investments – USD 12 millin

**Grant Agreement has been signed with Skolkovo, and Financing Agreement has been signed with RUSNANO.

Gazokhim Techno LLC

Oil and gas – downstream and transportation

Page 26: Skolkovo energy eng

Plasma arc technology for stripping the main pipelines

CONTACTS: www.petroplasma.net

THE ESSENCE OF INNOVATION• Arc stripping of metal surfaces with plasma

allows for efficient and complete removal of any contaminations

• The proposed technology can replace existing mechanical methods (shot blasting, brushing, manual cleaning)

COMPETITIVE ADVANTAGES• The quality of the surface pretreatment before

applying polymeric coating • Increased coating adhesion • Pipes service life increase

PROJECT PRODUCTTool for plasma arc stripping

CURRENT PROJECT STAGEPrototype development

FINISHED PRODUCT AVAILABILITY2014

KEY MARKETSPipe surface stripping for the main pipelines during overhaul at initial pipeline production and after installation

PROJECT NEEDS• Investments• Testing site

Petroplasma LLC

Oil and gas – downstream and transportation

Page 27: Skolkovo energy eng

Combination of catalytic processes and rectification in a single unit for production of EURO-5, MSAT-2 gasoline components

CONTACTS: www.globalrrt.com, [email protected]

THE ESSENCE OF INNOVATION• Combination of catalytic and separating systems

in the single device• Combination of three processes:

– Isomerization reactor – Hydro-izomerisation reactor – Rectification system

COMPETITIVE ADVANTAGES• 5x decrease of the operating costs for gasoline

manufacture • 3x CAPEX decrease • Compliance with EURO-5, MSAT-2 standards

PROJECT PRODUCT• Production plants engineering• Licensing

CURRENT PROJECT STAGEPilot plant under construction (tests start October 2012)

FINISHED PRODUCT AVAILABILITYQ4 quarter of 2012

KEY MARKETSRussia, India, China will increase the capacities for top-quality fuel manufacturing in the nearest future

PROJECT NEEDS• Strategic partner• Site for approbation • Access to customers

RRT LLC

=  Standard technology PRIS

Oil and gas – downstream and transportation

Page 28: Skolkovo energy eng

Supersonic gas separation technology (3S-technology)

CONTACTS: [email protected]

THE ESSENCE OF INNOVATION• Application of new high-performance devices

(3S-separators) and technological schemes (based on 3S-separators) for usage in oil and gas industry

• Development of 3S-technology in relation to CO2 and H2S separation and liquefaction of ethane and methane

COMPETITIVE ADVANTAGES• Power efficient• Small size• Low capital and operating costs• The absence of moving parts• No need for frequent maintenance• Increase of liquid products separation rate

PROJECT PRODUCTFacilities for gas conditioning and processing (for gas and oil fields and gas plants)

CURRENT PROJECT STAGECommercialization

INTELLECTUAL PROPERTY• More than 40 international patents and patent

applications• 9 Russian patents

KEY MARKETSWorld market of gas conditioning systems at gas and oil fields

PROJECT NEEDSNew Clients

ENGO Engineering Ltd.

3S-­‐сепараторы  на  Губкинском  ГКМ  и  месторождении  Talimi (Китай)  

3S-separators at Gubkinsky GKM and Talimu field (China)

Oil and gas – downstream and transportation

Page 29: Skolkovo energy eng

Tool for the remote detection of the pipelines deficiencies based on the magnetoresistive nanostructures

CONTACTS: Saint-Petersburg, Ligovsky pr., 254, www.polyinform

THE ESSENCE OF INNOVATION• Technical solution using three-component sensors

based on magnetic nano-films • Gradientomerty method realized in the system

provides for the decisive advantage in the accuracy of pipelines magnetic anomalies detection

• Software allows on-line processing and visualization of the defects magnetograms

COMPETITIVE ADVANTAGE• Remote detection and classification of defects

during the normal operating mode of a pipeline • Detection accuracy - 90 % • Defectoscopy of the parts that are unreachable for

the usual diagnostics methods

PROJECT PRODUCTMagnetometric system combining hardware and software

CURRENT PROJECT STAGEExperimental industrial model for the diagnosis of underground pipelines was created

FINISHED PRODUCT AVAILABILITY• 2012 - for underground pipelines• 2013 - for underwater pipelines

PROJECTS NEEDS• Investments• The site for R&D and production

CTI LLC

Oil and gas – downstream and transportation

Page 30: Skolkovo energy eng

Microchip for wireless smart metering systems

CONTACTS: Moscow, CEO: Alexander Buhman, [email protected]

THE ESSENCE OF INNOVATION Application specific integrated circuit (ASIC) allows to combine data transmission by radio channel and regular electric power lines (PLC-channel). This decreases the costs of smart metering system deployment and considerable increases reliability of data transmission.

COMPETITIVE ADVANTAGES• 3D mesh network guarantees the reliable data

transfer• Can be used for electricity, gas, water and heat

meters.• Unique hardware configuration allows to install on

the existing metering systems• Allows managing energy supply to the consumer

FINISHED PRODUCT AVAILABILITYQ4 of 2013

KEY MARKETS • Manufacturers of metering devices• The market in Russia amounts to ~ 20 millions

meters/year, which equals ~ RUR 60 billion /year

PROJECT NEEDSStrategic partners

PROJECT FINANCING• RUR 61,7 million – Skolkovo grand • RUR 61,7 million – own funds

‘Mobix Chip’ LLC

Housing and utilities solutions

Page 31: Skolkovo energy eng

Heating pipelines maintenance by flushing with special reagents

CONTACTS: s-avant.ru, +7 (495) 984 80 64 CEO: Anna Bleyer

THE ESSENCE OF INNOVATION• The surface-active substance (SAS) is used for

contamination removal from and subsequent protection of the inner surfaces of the heating pipes.

• Economically efficient technology for the use in apartment buildings and other real estate objects

COMPETITIVE ADVANTAGES• Decreases hydraulic resistance in the pipes by

30% due to the solid hydrophobic film that is created on the pipe walls

• Decreases losses of heating-carrier from 10 to 30%

• Lowers costs of maintenance and capital repairs as the cleaning effect lasts for at least three heating seasons

• The technology could be used during whole year

PROJECT PRODUCTInnovative reagent and the technology of its use

CURRENT PROJECT STAGEReagent development is almost completed, primary testing is on-going

FINISHED PRODUCT AVAILABILITY Q3 quarter 2013

KEY MARKETSCompanies operating heating networks

PROJECT NEEDS• Testing site• Strategic partners

PROJECT FINANCING• RUB 21,7 million – Skolkovo• RUB 7,5 million – own funds

SAVANT Research and Development

Housing and utilities solutions

Page 32: Skolkovo energy eng

Heating pipeline internal inspection systems with remote control

CONTACTS: Saint Petersburg, www.gazproekt.spb.ruCEO: Belyaev Alexander, [email protected]

THE ESSENCE OF INNOVATION • Revolutionary method of non-destructive control -

thickness gauging based on the dynamic skin-layer effect

• Electromagnetic and acoustic methods adjusted for the specific conditions of heating systems.

COMPETITIVE ADVANTAGES• In-line inspection is 7,5 times cheaper than the

inspection of the pipeline exposed to the surface because stripping works are not needed.

• The tool will identify the following defects: faulty fusions, undercutting, internal and external corrosion (including pitting), erosive wear of pipeline components, metal scaling in the pipe body.

PROJECT PRODUCTRobotized tool with remote control that can operate inside of the underground heating pipelines with the diameter 700-1200 mm

FINISHED PRODUCT AVAILABILITYQ3 of 2013

PROJECT NEEDS Testing sites

PROJECT FINANCING• RUR 27,8 million – Skolkovo • RUR 27,8 million – own funds

‘GAZPROECT – DIAGNIOSTIKA, LLC

Energy Efficiency Technologies Cluster – Skolkovo Foundation

4

30

In-­‐line  inspec+on  (ILI)  

The  diagnos+c  study  including  the  cost  of  the  

pipeline  stripping.    

The  cost  of  diagnos+c  for  1  km  of  hea+ng  systems’  pipelines  with  the  diameter  

1000,  RUR  million  

7

42

Repairs  following  the  results  of  ILI  

(replacement  of  specific  defec+ve  sec+ons)    

Repairs  without  ILI  (total  replacement)  

The  average  cost  of  repairs  of  1  km  for  hea+ng  systems  pipelines  with  the  

diameter  1000,  RUR  million  

Housing and utilities solutions

Page 33: Skolkovo energy eng

Energy saving heater made of polymer

CONTACTS: Vladimir Bosnik, [email protected], + 7 (917) 502-43-20

THE ESSENCE OF INNOVATION• Radiator has two autonomous contours, while

traditionally there is only one• Radiator is made of thermostatic polymer

COMPETITIVE ADVANTAGES• Saving of up to 40% of the heating energy• Reliable, resistant to corrosion, has extended

service life. • Production cost is several times lower than for

traditional heaters.

PROJECT PRODUCTThermostatic polymer radiator for the use in central heating systems

CURRENT PROJECT STAGE R&D is completed, prototypes were produced

FINISHED PRODUCT AVAILABILITYEnd of 2013

KEY MARKETS• Households• Building and development companies• Managing companies

PROJECT NEEDS• Premises for pilot production• Testing site

«SYSTEM HEAT»

Housing and utilities solutions

Page 34: Skolkovo energy eng

CONTACTS: +7 (499) 502-13-14, [email protected], www.qmodule.ruCEO: Martyn Nunuparov

THE ESSENCE OF INNOVATION• An efficient method of energy transformation

from mechanical pressure to electric energy for powering compact electronic devices or generating electric power

• The developed method can significantly increase the output of power generators charge (piezoelectric and radioisotopes that emit negatively charged electrons)

COMPETITIVE ADVANTAGES• The development allows creating battery-free

electronic devices for various applications • Development of electric energy generators to

accumulate electric energy from alternative sources is possible

PROJECT PRODUCT• Qconverter – ОЕМ- energy converters• Qswitch – piezoelectric transmitter for remote

control, Smart House Systems • One-cycle output energy of Qconverter –

1.25W*sec • Qconverter prime cost ~1 USD

FINISHED PRODUCT AVAILABILITYProject prototypes are available

KEY MARKETS• Industrial automation• Smart House Systems• Green electronics

PROJECT NEEDS• B2B orders• License holders• R&D co-investors

Transformation of mechanical pressure energy to electricity for the use in compact electronic devices

Qmodule Laboratory

Housing and utilities solutions

Page 35: Skolkovo energy eng

Innovative gas valve with extra-low energy consumption

CONTACTS: 4 Promyshlennaya Str., Troitsk, Moscow region 142190 Tel/Fax: +7 (495) 777-72-26, www.amtc.ru Line Director: Vladimir Sushko +7 (963) 697-56-14, [email protected]

THE ESSENCE OF INNOVATION • The use of high-energy NdFeB permanent magnet

and original engineering of electronics guarantee extra-low energy consumption

• On-bard computing facility allows to create adaptive emergency prevention systems.

COMPETITIVE ADVANTAGES• Extra-low power consumption level not exceeding

50 μA at the voltage of 3.6V• The device consumes 130,000 times less electric

power than the alternatives available in the market• With the use of 500,000 devices the annual power

saving may amount to 108,000 MW

PROJECT PRODUCTPatented electronically controlled gas shutoff valve

CURRENT PROJECT STAGE• Pilot production• All the necessary certificates and approvals for the

Russian market are available

KEY MARKETS• Gas supply control• Emergency prevention systems

PROJECT NEEDSMarket entry support

ENERGY EFFICIENT GAS VALVEAMT&C, LLC

Housing and utilities solutions

Page 36: Skolkovo energy eng

CONTACTS: Ozersk, Chelyabinsk region, tel.8 (35130) 9-47-22 [email protected], www:polymerpro.ru

Expandable sleeve of complex-modified polymer (smart plastic) for pipes recovery

THE ESSENCE OF INNOVATION• Polymeric sleeve that can increase its diameter

up to 200% due to molecular relaxation during repeated heating up to the plasticization temperature

• Complex-modified polymer composite resistant to mechanical and chemical impact and high temperature

COMPETITIVE ADVANTAGESThe technology allows reconstructing of damaged underground pipes using the trenchless method within the shortest period time and at minimal cost

CURRENT PROJECT STAGELaboratory prototype is developed with diametr 18 mm, leight 100 mm and magnification coefficient 1,3)

KEY MARKETSThe reconstruction is required for more than 600 000 km of pipes of various applications in Russia

• Households• Utilities companies• Oil & gas companies (at later stage of R&D)

Ural Factory of Polymer Technologies – Mayak

heating

Housing and utilities solutions

Page 37: Skolkovo energy eng

CONTACTS: 206 Tallinskoye Highway, Saint Petersburg, +7 (812) 406-80-67 www.optogan.ru, [email protected]

Low-cost, energy efficient and reliable light emitting diodes (LED), that are built using new components architecture

The company-participant is a subsidiary of «Optogan» JSC

ESSENCE OF INNOVATION• Transition from a separate light emitting diode to a

fully integrated intellectual light system (module) • LED, structure, driver, optics are on a single

substrate • Brand new class of energy efficient compact

multifunctional integrated light systems

COMPETITIVE ADVANTAGES• Integrated chip-on-board LED modules containing

emitter with primary optics allowing to generate light emission patterns of any configuration

• Integrated module light efficiency is more than 160 lm/W with the color rendering index CRI>85, light flux more than1,000 lm/cm2

• Lamp price for consumers will not exceed USD10 /klm

PROJECT NEEDSStrategic partners

PROJECT FINANCING• RUR 148,2 million – Skolkovo grand • RUR 151,8 million – own funds

Optogan. New Technologies of Light LLC

Housing and utilities solutions

Page 38: Skolkovo energy eng

CONTACTS: 206 Tallinskoye Highway, Saint Petersburg+7 (812) 406-80-67, www.optogan.ru

Organic light emitting diodes printing technology

The company-participant is a subsidiary of «Optogan» JSC

THE ESSENCE OF INNOVATIONThe use of optically active conjugated polymers and nano-composites based on polymer non-organic nanoparticles to develop organic light-emitting Diodes (OLED)

COMPETITIVE ADVANTAGES• Specifications of OLED based on multi-layered

composite structures is higher than that of polymeric-only ones due to more efficient emit-ting recombination (80 lm/Wt, brightness 3000 cd, life period not less then 10 000 hours)

• Inclusion of non-organic nanoparticles into poly-meric matrix considerably increases service life of OLED structures

• Flexible printing technology allows: – Significant decrease of production cost com-

pared to both non-organic LED and other OLED manufactured with the use of vacuum deposition technology

– Produce OLEDs with almost any width, length and shape

PROJECT NEEDSStrategic partners

PROJECT FINANCING• RUR 148,2 millions –

Skolkovo Foundation • RUR 151,8 millions – own funds

OPTOGAN – ORGANIC LIGHT SOLUTIONS LLC

Housing and utilities solutions

Page 39: Skolkovo energy eng

CLUSTER OF ENERGY EFFICIENT TECHNOLOGIESSkolkovo Foundation 12, Krasnopresnenskaya emb. Moscow, 123610Tel.: +7 495 967 01 48 [email protected]