UH Series
Shimadzu Universal Test ing Machines
C221-E3490C
A c q u i s i t i o n o f I S O 9 0 0 1 c e r t i f i c a t i o n
H i g h - p r e c i s i o n f o r c e m e a s u r e m e n t
V a r i o u s m e a s u r e m e n t m o d e s
A u t o m a t i c m e a s u r e m e n t
Shimadzu Universal Test ing Machines
P 04 - Features of UH-I
P 06 - Features of UH-FI
P 08 - Control Functions/Configuration
P 10 - Operation Unit
P 12 - Software
P 14 - Specifications Loading Unit
P 16 - Specifications Measurement&Control Unit
P 18 - Layout/Installation
Contents
As global environmental problems become more and more ser ious, mater ia ls are required to provide l ight weight, h igh strength and rel iabi l i ty. The UH Ser ies Shimadzu Universal Test ing Machines are new universal test ing machines that provide var ious funct ions enabl ing more accurate and simpl i f ied measurement of the strength required for var ious mater ia ls.
UH Series
The UH ser ies enable high-precis ion force measurement conforming to the global standards.
After a specimen is mounted, al l operat ions can be automat ical ly performed.
The UH ser ies provide var ious automat ic control programs as standard funct ions.
The UH ser ies are high-qual i ty products manufactured in the factory that acquired the ISO9001 cer t i f icat ion.
T h e U H - I s e r i e s s u p p o r t m a t e r i a l s t r e n g t h
t e s t s b y p r o v i d i n g r e l i a b l e d a t a .
4
Shimadzu Computer-control led hydraul ic servo system
The funct ions of the UH-I ser ies are great ly advanced, as compared with convent ional test ing machines.
UH-I
The large-sized LCD touch panel great ly s impl i f ies operat ions and enhances vis ib i l i ty.
The UH-I ser ies provide the graphical interface that enables var ious funct ionsto be operated on the one-touch panel .Dur ing a test , a S-S curve is plot ted in real t ime.
The UH-I ser ies newly provide var ious automat ic control programs as standard funct ions.
The metal tensile test control program is provided as a standard function (conforming to JIS Z2241)The single test control, cycle test control, high-temperature tensile test control, stroke speed 3-step switching control programs are provided as standard functions. Through the fully-closed loop automatic load control, the UH-I series enable stable and accurate tests.
Force auto-zero and auto-cal ibrat ion funct ions
The UH-I ser ies great ly s impl i fy operat ions by omit t ing t roublesome adjuster knob operat ions.
The non-revolv ing screw rod improves safety.
A specimen can be safely mounted and dismounted.
With var ious appl icat ion test ing equipment, the UH-I ser ies are appl icable to var ious tests.
Var ious test j igs, d isplacement measur ing equipment, atmosphere test ing equipment, test control programs, etc.(See the catalog for opt ional accessor ies.)
With connect ion to the opt ional data processing program, the UH-I ser ies enable high-speed test data sampl ing.
The UH-I ser ies perform data sampl ing at a high speed (5 ms max.) to obtain a true value. The UH-I series can be connected to a personal computer through the personal computer's standard RS-232C serial interface. Also, they can be connected to a notebook computer, saving the required space. (The GP-IB or another special interface is not necessary.)
5
T h e U H - F I s e r i e s p r o v i d e e a s y - t o - o p e r a t e
f r o n t - o p e n i n g h y d r a u l i c g r i p s .
6
ShimadzuComputer-control led hydraul ic servo systemWith Highly-ef f ic ient , f ront-opening hydraul ic gr ips
The UH-I ser ies advanced funct ions are fur ther upgraded.
UH-FI
Easy-to-operate f ront-opening hydraul ic gr ipsThe front-opening hydraul ic gr ips using the center hole hydraul ic cyl inder improves the ef f ic iency in removing a specimen and scale, and ensures safe operat ion.Also, these gr ips enable even long specimens to be easi ly mounted.These gr ips can be enhanced to the highly- funct ional , labor-saving model that has the automat ic gr ip face changing funct ions.
The compression plate can be easi ly mounted anddismounted
A wrench or other tool is not necessary.
A specimen gr ip posi t ion index is provided
With the specimen gr ip posi t ion index, the gr ips can easi ly and accurately gr ip a specimen.
The gr ip face holder is equipped with a safety stopper
The safety stopper prevents the r ight and lef t gr ip faces from coming into contactdue to erroneous operat ion, so that the gr ip faces wi l l not be damaged.
The UH -FI ser ies can be enhanced to a fu l ly -automated tensi le test system
All operat ions including specimen dimension measurement, specimen feeding operat ion, test data processing and char t d isplay can be automated.
7
High precision control using closed [ Computer-controlled hydraulic servo system ]
Measurement Control Unit
Control Functions
8
Lower crosshead elevating switch
Operation unit
Loading pump ON/OFF switch
Load control knob
Emergency stop switch
(3) Cycle test control NOTE 1)
(4) Stress test control (Metal tensile test control) (6) Stroke speed 3-step switching control
1st 2nd
Min. point
Switching point 2
Switching point 1
Max.point
Stroke
Constant-speed stroke control Constant-speed stroke control Constant-speed stroke control
Metal tensile test control is performed according to each standard (ISO 6892, EN 10002, JIS Z2241, ASTM E8M, etc.).
Stroke/force/strain cycle tests can be performed.
Stroke control for metal tensile test conforming to JIS Z2441
Constant-speedstress control
Constant-speedstress control
Switching point 2
Switching point 1
Displacement
Displacement
Stress
(1) Constant-speed control
Time
Control value
Controlvalue
(2) Constant-speed control -> Hold controlStroke/Force/Strain Stroke/Force/Strain
(5) High-temperature tensile test control
Force
3% of full-scaleforce
Time Time
Break
Break
This control mode automatically performs tensile tests according to JIS G0567.
Hold control (0 to 10 hours)
Hold control (0 to 10 hours)
Switching point
Constant-speedstroke control
Constant-speedstrain controlInitial stroke control
Control value
Time Time
NOTE 1) A optional oil cooling unit may be required depending on the installation conditions and operation conditions (for example, to perform hold control continuously for at least 30 minutes) (See p. 17.)NOTE 2) Various control modes are optionally available. (See p. 17.)
NOTE 3)Various cycle tests can be performed in the "Constant-speed control -> Hold control" modes by specifying the parameters repeatedly.
loop system
9
UH Series Configuration
Application testing equipment (Option)
Data processing/display/recording devices
Measurementcontrol functions
Tensile test jig
Compression test jig
Bending test jig
Atmosphere testing device
Displacement measuring device
Analog recorderX-TP type or X-YTP type
Analog force indicator
Simple dataprocessing unitDATA LETTY 531
Windows XP/2000/Me/NT4.0/98/95Software TRAPEZIUM2
Various controlfunctions
• Concrete test control
• Pattern control
• Display of force for specified elongation, etc.
Various jigs/devices
Universaltesting machine
Standardtest jigs
Standardcontrol functions
Loading unit
Measurementcontrol unit
Hydraulic system
Grip facesfor tensile test
Compressionplate forcompression test
Single control
Cycle control
Stress test control (Metal tensile test control)
High-temperaturetensile test control
Stroke speed 3-stepswitching control
The abundant functions improve
Measurement Control Unit (Operation Unit)
10
During a test, a S-S curve is displayed in real time.
The large-sized force/stroke data display can be easily read. The display can be switched to the stress value display mode or displacement value display mode with a touch of a button.
Since the testing machine's operating status and test conditions can be checked at a glance, an erroneous setting or erroneous operation can be prevented.
For frequently-used control switches, highly-durable mold type switches are used.
Test Condition Menu Screen File Operation Screen
Large character display
Operation keys
Testing machine operating status/test condition display
S-S curve display
The testing machine's functions can be visibly operated with the icon buttons. It can prevent erroneous operation, and improve the test efficiency.
The test condition changeover operation can be simplified by storing test conditions in a file of each test type.
the test efficiency.
11
Force Auto-calibration Function Auto/Full-Auto Force Range Switching Function
Auto-return Function
Break Detecting Function
Bilingual Function
PEAK/BREAK Value Display Function
Cycle Count Function
The electrical force calibration can be performed with a touch of a button, without the necessity of troublesome adjuster knob operations.
This function detects a specimen break to automatically stop the testing machine and return it to the origin.
Japanese or English can be selected on the LCD touch panel screen. The display language can be switched with a touch of a button on the screen.
When a recorder is connected, the force range is automatically changed immediately before the force output signal exceeds the full-scale value.
This function automatically returns the ram of the testing machine to the origin with a touch of a button. When the auto-return function is used together with the break detecting function, the testing machine automatically returns to the origin after detection of a specimen break.
The force, stress and strokes values at the maximum force point and break point are displayed during a test. When a displacement meter is connected, the displacement value at each point can be also displayed.
During a cycle test, the number of repeated load applied to the specimen is displayed. Also, this function can stop the test, or break the specimen in the preset cycle number.
The high-speed data sampling obtains Test Control & Data Processing
5 ms High-speed Sampling
The newest User Interface
12
For Windows® 95/98/NT4.0/2000/Me/XP UH Series Software
Part No. 345-47313
The TRAPEZIUM provides the easy-to-operate user interface, which is based on the global design incorporating the opinions of worldwide users and software experts.
A curve can be traced with the picking function
Screen customize function Useful on-line help
To monitor the change in the material completely, the UH series perform data sampling at an interval of 5 ms max. (for 100 seconds), enabling high-precision force measurement in the elastic region and break region. For normal sampling, the sampling interval can be set to 50 ms (max.), 100 ms or 150 ms.
High-speed sampling Normal sampling
100 seconds (max.)
Easy and flexible setting using wizard
Wizard Graph
Menu Customize On-line Help
Tensile, compression, 3-point bending, 4-point bending, Concrete, Shear, Friction, Tensile cycle, Compression cycle, 3-point bending cycle, 4-point bending cycle, Creep and Relaxation Tests
List of data processing items
The TRAPEZIUM provides a security function for preventing test data from being erroneously deleted or overwritten. With the ID and password predetermined for the manager or operator, the system enables only the menu and buttons necessary for each person to be operated. Also, the TRAPEZIUM provides the log file function that automatically records operation contents.
The TRAPEZIUM can be quickly linked to spreadsheet and word processing software. Test conditions, test results and sampling data can be exported in the "* .csv" format, and graphs can be exported in the "* .wmf" format.
Elastic modulus (4 types)
Upper yield point
Lower yield point
Yield strength point (2 points)
Intermediate force (5 points)
Intermediate displacement (5 points)
Maximum force point
Minimum force point
Break point
Joint elongation/reduction
Energy
Reciprocation energy
Hysteresis
n value, r value. Poisson's ratio
Arbitrary calculation formula (10 formulae)
The circle indicates an available data processing item.
Test data protection
Overwrite prevention
Password setting
Record of operation contents
Test result export
Link to spreadsheet andword processing software
English/Spanish/Chinese (Simplified/Traditional)/Korean/Portuguese/Japanese available (Other languages available on request)
Security functions
Tensile Compression 3-point bending 4-point bending Cycle Concrete Control(2 types) (1 type)
(Arbitrary number of points)
(Arbitrary number of points)
(Poisson's ratio)
a true value. Software (Option)
Test Data Protecting Security Function
13
Link to General-purpose Software
TRAPEZIUM2 is al l -around software
Loading Unit Standard SpecificationsStandard Series
14
Specifications
Capacity
Max. grip span (mm)
Grips for rod specimens (mm)
(Option)
Grips for flat plate specimens (Option)
(mm)
Max. compression plate span (mm)
Compression plate size (mm)
Max. support span (mm)
Support diameter x Width (mm)
Punch tip radius (mm)
Punch width (mm)
Motor capacity (3-phase)
(mm)
(mm)
(mm)
(Approx.)(mm/mim)
Motor capacity (3-phase)
900
ø12~50
With liner
0~45
(60 in width)
800
ø120
600
50 x 160
25
160
180 max.
5.5kW
250
450
750W
650
650 x 650
9kVA
50A
960 x 650 x 2400
700 x 1000 x 1070
1700
800
ø8~40
With liner
0~35
(50 in width)
720
ø100
500
30 x 130
15
130
100 max.
1.5kW
200
380
400W
500
500 x 500
3.5kVA
20A
780 x 500 x 2000
700 x 800 x 1070
900
800
ø8~40
With liner
0~35
(50 in width)
720
ø100
500
30 x 130
15
130
100 max.
1.5kW
200
380
400W
500
500 x 500
3.5kVA
20A
780 x 500 x 2000
700 x 800 x 1070
900
ø12~50
With liner
0~45
(60 in width)
800
ø120
600
50 x 160
25
160
80 max.
1.5kW
250
450
750W
650
650 x 650
4kVA
20A
960 x 650 x 2400
700 x 800 x 1070
1700
ø12~30
ø30~50
0~30,30~50
(60 in width)
800
ø120
600
50 x 160
25
160
80 max.
1.5kW
250
250
Hydraulic motor
650
650 x 650
6.6kVA
30A
1060 x 700 x 2900
700 x 800 x 1070
2600
900
1) The UH series provide the above loading speeds when no specimen is mounted and the oil temperature is 20°C or a higher temperature. 2) The hydraulic loading system is incorporated in the measurement control unit. (For the testing machines with 3000 kN or higher capacity, the hydraulic loading system is separately provided.)3) The standard testing machines provide force accuracy of within ±1.0% of the indicated value. With the optional high-precision type, the force accuracy is within ±0.5%.4) The transverse/bending test jigs are optionally available. 5) For a different paint color, contact Shimadzu or a local distributor. 6) In elasticity testing, one set of grip for rod specimens is included as standard equipment. Other types of grips are optional. Note: These standard grips are designed for use with specimens with a hardness of HRC40 or less. When using specimens harder than this, contact us and we will prepare high-hardness grips.
SI unitType
Part No.
UH-600kNI
346-43249
UH-200kNI
346-43051
UH-300kNI
346-43052
UH-500kNI
346-43053
UH-F500kNI
346-43070
Max. capacity
Force range (6 steps)
600kN
(60tf,135000Lbf)
600/300/120/60/30/12kN
300kN
(30tf,67500Lbf)
300/150/60/30/15/6kN
125
1.Tensile test
2.Compression test
5.Ram stroke
10. Recommended breaker capacity (3-phase, 200/220 V, 50/60 Hz)
9.Power supply capacity (3-phase, 200/220 V, 50/60 Hz)
12.Testing machine weight (Width x Depth x Height)
11.Testing machine size (Width x Depth x Height)
8.Effective table dimensions (Width x Depth)
7.Post span
6.Crossheadelevation speed(60 Hz)
4.Loading speed (60 Hz)
3.Transverse /bending test (Option)
Testing machine (kg)
Measurement control unit (kg)
Testing machine (mm)
Measurement control unit (mm)
NOTE
200kN
(20tf,45000Lbf)
200/100/40/20/10/4kN
500kN
(50tf,112500Lbf)
500/250/100/50/25/10kN
(Approx.)
15
Large-capacity Series
ø30~120
With liner
0~115
(120 in width)
1150
ø300
1000
80 x 250
40, 50
250
50 max.
7.5kW
350
350
3.7kW
1150
1150 x 1150
16kVA
100A
2200 x 1400 x 4800
700 x 800 x 1070
ø20~60
ø60~90,ø90~120
0~60,60~120
(120 in width)
1150
ø300
1000
80 x 250
40, 50
250
50 max.
7.5kW
350
350
5.5kW
1150
1150 x 1150
18kVA
100A
2200 x 1400 x 5900
700 x 800 x 1070
1400
ø20~110
With liner
0~105
(110 in width)
1000
ø280
1000
80 x 230
40, 50
230
50 max.
5.5kW
300
350
2.2kW
1000
1000 x 1000
11kVA
60A
1860 x 1100 x 3970
700 x 800 x 1070
1200
ø20~90
With liner
0~85
(90 in width)
950
ø220
900
70 x 200
30, 40
160
50 max.
5.5kW
300
350
1.5kW
850
850 x 850
10kVA
50A
1560 x 920 x 3400
700 x 1000 x 1070
ø20~55
ø55~90
0~45,45~90
(90 in width)
950
ø220
900
70 x 200
30, 40
160
50 max.
5.5kW
300
350
2.2kW
850
850 x 850
13kVA
75A
1560 x 920 x 4500
700 x 1000 x 1070
1100
ø12~70
With liner
0~65
(70 in width)
900
ø160
800
50 x 160
25
160
70 max.
2.2kW
250
400
1.5kW
750
750 x 750
6kVA
30A
1170 x 750 x 2800
700 x 800 x 1070
3500
ø12~40
ø40~70
0~35,35~70
(70 in width)
900
ø160
800
50 x 160
25
160
70 max.
2.2kW
250
200
Hydraulic motor
750
750 x 750
8kVA
50A
1320 x 800 x 3400
700 x 800 x 1070
6000
1000
NOTE The large-capacity series are produced at customers' request. For details, contact Shimadzu or a local distributor.
UH-4000kNI
346-43058
UH-F4000kNI
346-43074
UH-3000kNI
346-43057
UH-F3000kNI
346-43073
UH-2000kNI
346-43056
UH-F2000kNI
346-43072
UH-1000kNI
346-43055
UH-F1000kNI
346-43071
ø20~55
ø55~85
0~55,55~110
(110 in width)
1000
ø280
1000
80 x 230
40, 50
230
50 max.
5.5kW
300
350
3.7kW
1000
1000 x 1000
15kVA
75A
1860 x 1100 x 5700
700 x 800 x 1070
1000kN
(100tf,225000Lbf)
1000/500/200/100/50/20kN
2000kN
(200tf,450000Lbf)
2000/1000/400/200/100/40kN
3000kN
(300tf,675000Lbf)
3000/1500/600/300/150/60kN
4000kN
(400tf,9000000Lbf)
4000/2000/800/400/200/80kN
125
Measurement and Control Unit
16
Method
Accuracy Standard type
Computer-controlled electro-hydraulic servo system
Cylinder internal pressure measurement with high-precision pressure cell
Within ±1.0% of indicated value (when the force is 1/5 or more of the full scale for each force range)
*1(Conforming to JIS B7721 Class 1, ISO 7500/1 Class 1, and ASTM E4)
Within ±0.5% of indicated value (when the forece is 1/5 or more of the full scale for each force range)
*1 (Conforming to JIS B7721 Class 0.5, ISO 7500/1 Class 0, and ASTM E4)
x1, x2, x5, x10, x20 and x50 (6 steps)
Digital display Display resolution: 1/2000 (300 kN/600 kN/3000 kN: 1/3000)
Display unit: N, kN, kgf, tf, lbf
Analog display Scale plate diameter: 450 mm
Min. scale: 1/1000 (300 kN/600 kN/3000 kN: 1/600)
Digital display Display resolution: 1/2000 (300 kN/600 kN/3000 kN: 1/3000)
Display unit: kN
Measurement with optical encoder
Fully-closed loop automatic load control Display unit: mm, in
Digital display (Display resolution: 0.1 mm)
Single test control,Cycle test control (Triangular wave, Trapezoidal wave),Stress test control (Metal
tensile test control), High-temperature tensile test control, Stroke speed 3-step switching control
Ram stroke control Speed range: 0.5 mm/min(0.02 in /min) to Max. loading speed *2
Control range: Ram return point to Max. ram stroke
Force contro Speed range: 0.1 to 5.0 full-scale/min.
Control range: 5 to 100% of full-scale force
Strain control Speed range: 0.1 to 80% /min.
Control range: 5 to 100% of full-scale elongation
External analog input: 2 CH
External analog output: 2 CH
Recorder output: RS-232C interface
Two displacement meter amplifiers can be incorporated. (Option)
Force auto-zero function, Force auto-calibration function,
Break detecting function, Auto/Full-auto force range switching function, Auto-return function,
Arbitrary stroke speed setting function, Cycle count function, PEAK/BREAK value display function,
Stress value display function, Force value display function, Stroke value display function,
Displacement meter displacement value display function, Test condition file function,
Japanese/English display function, S-S curve display function, Manual load control function
Overload automatic stop function
(When the force value exceeds 102% of the full-scale value, the loading pump automatically stops.)
Control automatic stop function
(When the control deviation exceeds ±10% of the full-scale value, the test automatically stops.)
Emergency stop switch
*1 Calibration is required after installation to provide conformance.
*2 For the maximum loading speed, refer to the testing machine specifications.
1. Loading method
8. Safety devices
7. Standard functions
6. Input/output interface
5. Automatic load control
4. Stroke measurement display
3. Force display
2. Force measurement
High-precisiontype (Option)
Conformity with CE mark regulation
Test control functions
Range
Method
Analog indicator (Option)
Operation unit
Magnification
Standard Specifications
17
Testing Machine Loading Unit with Extended Post/Screw Rod
Optional Oil Cooling Unit Measurement Control Unit Extension Series
Universal Testing Machines Extension Series
To mount application testing equipment such as the bending test jig, thermostatic chamber and high-temperature furnace to the loading unit, extendedposts and screw rod may be required. Select the extension model depending on the occupied space of each testing equipment and the specimen size.
Standard gripspan(mm)
UH-I
UH-FI
Applicable testing machine Extension model S Extension model M Extension model L
NOTE 1) In the above table, the * mark indicates the extension length required to mount the thermostatic chamber or furnace. 2) The allowable tensile force is limited at the post extension part. The compression force will not be limited.
Part No.Allowable
tensile forceSeriesname
Capacity Extensionlength(mm) Part No.
Allowabletensile force
Extensionlength(mm) Part No.Allowable
tensile forceExtension
length(mm)
200/300
500
600
1000
2000
500
1000
2000
800
900
900
1000
1100
900
1000
1100
*300
*300
*200
*200
*300
*200
*200
320
800
1800
Full force
Full force
Full force
Full force
343-01072-03
343-01072-03
343-01073-02
343-01074-02
343-02525-03
343-02526-02
343-02527-02
*400
500Top plate attached
500Top plate attached
500Top plate attached
500Top plate attached
500Top plate attached
500Top plate attached
500Top plate attached
343-01071-04
343-01072-05
343-01072-05
343-01073-05
343-01074-05
343-02525-15
343-02526-15
343-02527-15
600Top plate attached
800Top plate attached
800Top plate attached
800Top plate attached
800Top plate attached
800Top plate attached
800Top plate attached
800Top plate attached
200/250 343-01071-06
343-01072-08
343-01072-08
343-01073-08
343-01074-08
343-02525-18
343-02526-18
343-02527-18
300
300
700
1700
200
500
1300
Full force
400
400
Full force
Full force
250
600
1500
When the extension series of universal testing machines are used together with the application testing equipment, a wider range of tests can be performed.For details, refer to the catalogs for the application testing equipment and application testing system.
200 · 300
500
600
1000
2000
343-01585
343-01585
343-01585
343-01585
343-01585-01
UH-I
UH-FI
NOTEConduct water supply/drain piping work to the position shown in the foundation reference drawing presented by Shimadzu Corporation.
Capacity Part No.Series name
To perform hold control or an equivalent test continuously
for 30 minutes or longer,the optional oil cooling unit may be
required. Concrete test control function
Constant-speed ram stroke controlRam return
Stressspeedcontrol 1
Stressspeedcontrol 2
1% of full-scale force
LIMITstress value
Force
Break detection
Time
Part No. 345-32722
To extend the automatic load control functions, the following control modes are available.
The stress speed is controlled according to the JIS A1108 concrete compression strength test method.
Display of force for specified elongation Part No. 345-32723
Force
Elongation(%)
Specifiedelongation
Specified elongation
This control mode conforms to the total elongation method for the JIS Z2241 proof stress measurement.
This control mode is used to provide the load pattern to obtain the limit of the product strength from a single specimen.
Pattern control function Part No. 345-32724
1st force limit
TimeTest end
Stroke (Force)
Final force limit
3rd force limit
Limit change value
2nd force limit
0
Layout/Installation
18
The following figures show the standard layout of Shimadzu Universal Testing Machines. To change the layout depending on the conditions of the installation place or a change in system configuration, examine the layout referring to these figures.
To install the universal testing machine, concrete foundation work is required. When purchasing this product, design and construct the foundation suitable for the conditions of the installation place (withstand strength of the ground, occupied space, etc.), referring to the foundation reference drawing presented by Shimadzu Corporation.
Occupied space recommended for the standard layout * For the dimensions of the testing machine loading unit and measurement control unit of each type, see p. 14 and 15.
Series name Capacity
200kN
300kN
500kN
600kN
1000kN
Recommended occupied space
(W x D x Hmm)
2800 x 2350 x 2500
2800 x 2350 x 2500
3000 x 2350 x 3000
3000 x 2550 x 3000
3300 x 2400 x 3500
Testing machine
UH-I
Unit:mmUnit:mm
Maintenance space Approx. 500
D
Equipment width
Loading unit
Floor surface
Leakage oil return unit (in pit)
W
D
Pit cover(prepared by user)
H
H
Equ
ipm
ent h
eigh
t
Series name Capacity
2000kN
3000kN
4000kN
Recommended occupied space
(W x D x Hmm)
4600 x 3500 x 4000
5300 x 3900 x 5000
5800 x 4300 x 6000
Testing machine
UH-I
Work
ing s
pace
Appro
x. 1
000
Equip
ment
depth
W
Maintenance space Approx. 500
Maintenance space Approx. 500
Maintenance space Approx. 500
Equipment width
Work
ing s
pace
Appro
x. 1
000
Equip
ment
depth
Maintenance space Approx. 500
Maintenance space Approx. 500
Loading unit
Floor surface
Equ
ipm
ent h
eigh
t
19
Avoid installing the UH series in the following harsh environments:In a place where a large temperature fluctuation is expected (Recommended temperature: +5°C to +40°C)In a place where high humidity is expected (Make sure no condensation occurs in the installation place.)In a dusty placeIn a place where the equipment is exposed to vibration (Recommended vibration amplitude: 5 μm or less)In a place contaminated by corrosive gasIn a place where the equipment is directly exposed to vaporIn a place where the equipment is directly exposed to sunlight
Conduct electric wiring work to the position shown in the foundation reference drawing.Avoid using a power supply with large voltage fluctuations.(Recommended voltage fluctuation level: Within ±10%)If voltage fluctuations cannot be avoided, use a constant-voltagepower supply.
1.Installation environment 2.Requirements for power supply
To mount the optional oil cooling unit, conduct water supply/drain piping work to the position shown in the foundation reference drawing presented by Shimadzu Corporation.
3.Cooling water
Hydraulic grip/crosshead elevation system
Hose stand
Hose stand
Hydraulic grip/crosshead elevation system
Leakage oil return unit(in pit)
W Equipment width
W
D
H
D
Unit:mm Unit:mm
Floor surface Floor surface
Pit cover(prepared by user)
H
Series name Capacity
Recommended occupied space
(W x D x Hmm)
Testing machine
UH-FI 3100 x 3400 x 3500500kN
Series name Capacity
1000kN
2000kN
3000kN
4000kN
Recommended occupied space
(W x D x Hmm)
4500 x 4200 x 4300
4600 x 4500 x 5400
5000 x 4700 x 7100
5500 x 5000 x 7500
Testing machine
UH-FI
Maintenance space Approx. 500
Equipment width
Work
ing s
pace
Appro
x. 1
000
Equip
ment
depth
Maintenance space Approx. 500
Maintenance space Approx. 500
Loading unit
Equ
ipm
ent h
eigh
t
Loading unit
Equ
ipm
ent h
eigh
t
Maintenance space Approx. 500
Maintenance spaceApprox. 500
Equip
ment depth
Maintenance space Approx. 500
Work
ing s
pace
Appro
x. 1
000
Printed in Japan 4199-06603-20ATD
The contents of this brochure are subject to change without notice.
SHIMADZU CORPORATION. International Marketing Division3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax. 81(3)3219-5710URL http://www.shimadzu.com
Founded in 1875, Shimadzu Corporation, a leader in the development of advanced technologies, has a distinguished history of innovation built on the foundation of contributing to society through science and technology. We maintain a global network of sales, service, technical support and applications centers on six continents, and have established long-term relationships with a host of highly trained distributors located in over 100 countries. For information about Shimadzu, and to contact your local office, please visit our Web site at www.shimadzu.com
JQA-0376
Top Related