Sensor Positioning SystemAward winning flexible system for sensor placement
Base Footn Holds standard 12 mm diameter rods
n Vertical or horizontal rod placement
n Fits on aluminum extrusions, base plates and profiles
Jointn Connects and holds 2 standard 12mm diameter rods
n Easy to connect and disconnect
n Mix and match joint and knuckle in available space
2
Efficient, Precise and Easy to AssembleSo you picked the best sensor for the application, but engineers know implementation is everything. You select the best technology in the world
for your equipment but if it is not designed, installed, and positioned properly, it will never work right. This can cause warranty issues and service
calls over a simple sensor installation. Operators or technicians disable or remove faulty sensors if they start impacting immediate production
requirements. These kinds of situations can then lead to bigger problems later — maybe the bracket doesn't hold the sensor in position, or the
bracket cannot be aligned to the target. There are tens of thousands of mounting options available and selecting the right one that will work long
term can be daunting. The Balluff mounting system (BMS) is efficient, precise, easy to assemble and is an award winning design, adding modern
style and high functionality in positioning sensors.
Rodn Standard 12mm diameter
n Anodized aluminum or stainless steel rods
n Rods can be cut to fit desired length
Knucklen Connects rod to sensor holder
n Can be adjusted easily to angle the
beam or reflector
Sensor Holdern Universal sizes to fit standard tubular sensors
n Different varieties of holders to fit reflectors or sensors
n All of the sensor holders fit with the knuckle
3n www.balluff.com
Sensor positioning can be a simple or complicated task with multiple factors to take into account.
1 What sensor? How does it mount? What is the sensing distance? Is there a dead zone? Stainless steel needed?2 What target? Where is the target? Where is the target coming from? Where can I sense on the target?3 What space? Where can I connect to the machine? What are the obstacles to overcome? Is there vibration?
4
Accessories Cross-connections and base foot
Description Base Foot Joint Knuckle Version For 1 mounting rod Ø 12 mm
(vertical or horizontal)For 2 mounting rods Ø 12 mm
For 1 mounting rod Ø 12 mm
Use For mounting on base plates or profiles
Adjustable connecting piece for Ø 12 mm mounting rods
For holding all sensor and reflector mounts
Ordering code BAM024P BAM024R BAM024TPart number BMS CU-M-D12-B028-00 BMS CCJ-M-D12-B-01 BMS CS-M-D12-BZMaterial/Surface protection GD-Zn/chrome-plated GD-Zn/chrome-plated GD-Zn/chrome-plated
5.2
13
36
28
32.5
64
M5
(2x)
30
Ø12
Ø12
12
15
6
Ø19.8
45.5
30Ø
12
18.9
24.2
M5
30
Ø12
Ø12
Ø32.3
36.3
46.7
16
5n www.balluff.com
AccessoriesRods
Description Mounting rod Ø 12 mm Mounting rod Ø 12 mmVersion Knurled, can be cut to required size Smooth, can be cut to required sizeLength 100 mm Ordering code BAM021Y
Part number BMS RS-M-D12-0100-00Length 150 mm Ordering code BAM002R BAM0045
Part number BMS RS-M-D12-0150-00 BMS RS-S-D12-0150-00Length 200 mm Ordering code BAM021T
Part number BMS RS-M-D12-0200-00Length 250 mm Ordering code BAM002T
Part number BMS RS-M-D12-0250-00Length 300 mm Ordering code BAM021W BAM0046
Part number BMS RS-M-D12-0300-00 BMS RS-S-D12-0300-00Length 750 mm Ordering code BAM021U
Part number BMS RS-M-D12-0750-00Length 1000 mm Ordering code BAM002U
Part number BMS RS-M-D12-1000-00Material Anodized aluminum Stainless steel
The mounting rods are knurled full-length.
This prevents any position change.
Stainless
Steel
1×45
°1×
45°
L
Ø12
1×45
°1×
45°
L
Ø12
6
Stainless
SteelStainless
Steel
Description M8 sensor holder M12 sensor holderVersion For clamping cylinders For clamping cylindersUse For sensors and
clamps M8For sensors and clamps M12
Ordering code BAM0036 BAM0037Part number BMS CS-M-D12-ID08-01 BMS CS-M-D12-ID12-01Material Stainless steel Stainless steelKit 1 containing: 150 mm rod, knuckle, foot, sensor holder
SET016T BAV BP-PH-00105-02
Kit 2 containing: 2x150 mm rod, knuckle, joint, foot, sensor holder
SET016W BAV BP-PH-00065-02
Ø20
Ø8.5
90°
3
Ø20
Ø12.5
90°
Stainless
SteelStainless
Steel
Description M12 adjustment unit M18 adjustment unitVersion For clamping cylinders For clamping cylindersUse For aligning laser sensors M12 For aligning laser sensors M18
Ordering code BAM003E BAM0038Part number BMS AD-M-002-D12/D12 BMS AD-M-002-D12/D18Material Stainless steel Stainless steel
Ø20
Ø12
.5
Ø20
Ø18
.5
AccessoriesTubular style mounting and positioning
7n www.balluff.com
Stainless
Steel
Description M18 sensor holder M30 sensor holderVersion For clamping cylinders For clamping cylindersUse For sensors and
clamps M18For M30 sensors and clamps
Ordering code BAM0032 BAM0033Part number BMS CS-M-D12-ID18-01 BMS CS-M-D12-ID30-01Material Stainless steel Stainless steelKit 1 containing: 150 mm rod, knuckle, foot, sensor holder
SET016U BAV BP-PH-00105-01
Kit 2 containing: 2x150 mm rod, knuckle, joint, foot, sensor holder
SET011M BAV BP-PH-00065-01
Ø18.5
90°
34
3
Stainless
Steel
33
2619
3
47
Ø42 Ø30.2
Ø20
R14
90°
AccessoriesTubular style mounting and positioning
Single Rod-Kit 1includes:1-foot
1-rod (150 mm)
1-knuckle
1-sensor holder
(does not include sensor)
Dual Rod-Kit 2 includes:1-foot
2-rods (150 mm)
1-knuckle
1-sensor holder
(does not include sensor)
8
Stainless
Steel
AccessoriesBlock style and reflector Mounting and positioning
1
A-A
6.6
120
15
60
36.8
R20
.3
50°
AA
5
Ø27
Ø20
Ø12
4
250
49.5
3.810
.5
15.325
.334.3
40.5
200.
5
2×M3
Ø6.5
2×M4
M516
55.5
51
1629.5
344.75
510
.5
57
16 16
3.5
0.7
5.5
3× Ø3.5
6× Ø4.2
4.75
61
20
3
59
34
Order code BAM003C BAM003A BAM0042 BAM0043 BAM01AW BAM01ULPart description BMS CS-M-D12-BX05-02 BMS BS-M-D12-0250-01 BMS CR-M-D12-IS-04 BMS CS-M-D12-B21K-04 BMS CS-M-D12-B23K-05 BMS CS-M-D12-IX14-01SensorsBCS Q40 n
BOS 21M n n
BOS 23K n n
BOS 25K n n
BOS 26K n n n
BOS 50K, 63M, 66M n
ReflectorsBOS R-1, R-14, R-26 n
BOS R-9 n n n
BOS R-22 n n
BOS R-34, R-36, R-44, R-46 n
9n www.balluff.com
Stainless
Steel
AccessoriesBlock style and reflector Mounting and positioning
Stainless
Steel
36°
Ø20
2550
73
88
50
8
40
4× Ø
4.3
R20
56
3
42
20
30
11
2× Ø
7 11
6.5
35
3
30
Ø20 7.
9
11
29
2× M
4
7.9
13
55Ø8
11
2714
40
20
Order code BAM003C BAM003A BAM0042 BAM0043 BAM01AW BAM01ULPart description BMS CS-M-D12-BX05-02 BMS BS-M-D12-0250-01 BMS CR-M-D12-IS-04 BMS CS-M-D12-B21K-04 BMS CS-M-D12-B23K-05 BMS CS-M-D12-IX14-01SensorsBCS Q40 n
BOS 21M n n
BOS 23K n n
BOS 25K n n
BOS 26K n n n
BOS 50K, 63M, 66M n
ReflectorsBOS R-1, R-14, R-26 n
BOS R-9 n n n
BOS R-22 n n
BOS R-34, R-36, R-44, R-46 n
Stainless
Steel
28
Ø20
20
3
34
32
10
16
2x M4 - 6H
4
10
Order code BAM0039 BAM0040 BAM0034 BAM003N BAM0035 BAM01AYPart description BMS BS-M-D12-0250-02 BMS CS-M-D12-BX06-03 BMS CR-M-D12-IU-02 BMS CR-M-D12-IU-05 BMS CR-M-D12-IS-03 BMS CS-M-D12-BX07-06SensorsBOS 2K, 5K, 6K n n
BOS Q08 n
BOS 50K n
ReflectorsBOS R-1 n n
BOS R-2, R-3 n
BOS R-6BOS R-11 n n
AccessoriesBlock style and reflector Mounting and positioning
Ø12
4
2.7
250
11.2
21.5
20
25 15
10
4.5
16.5
150
4×M3
3×Ø3.4
Ø5.
9
Stainless
Steel
19
2317
3
24
15
9.5
17
13
12
Ø20
28
65
4× M3×0.5
25.4 12.5
2× Ø4.2
25
79
72× Ø
5.2
9.5
17
Stainless
Steel
Ø5.3
Stainless
SteelStainless
Steel
11n www.balluff.com
Order code BAM0039 BAM0040 BAM0034 BAM003N BAM0035 BAM01AYPart description BMS BS-M-D12-0250-02 BMS CS-M-D12-BX06-03 BMS CR-M-D12-IU-02 BMS CR-M-D12-IU-05 BMS CR-M-D12-IS-03 BMS CS-M-D12-BX07-06SensorsBOS 2K, 5K, 6K n n
BOS Q08 n
BOS 50K n
ReflectorsBOS R-1 n n
BOS R-2, R-3 n
BOS R-6BOS R-11 n n
AccessoriesBlock style and reflector Mounting and positioning
Stainless
Steel
R13.
5
Ø3.
5
85
Ø20
21
85
77
93
77
274
4
3
85
77
7785
4
93
Ø3.5
4
54.7
3421
.2
22.4
M4
M4
18.2
Ø20
21
3
R13.5
27
M4
12
AccessoriesSensor and light mounts
Order code BAM01F3 BAM003F BAM003H BAM003R BAM003P BAM01F2Part description BMS CS-M-D12-BX10-08 BMS BS-M-D12-0250-03 BMS BS-M-D12-0400-04 BMS CS-M-D12-IQ40-03 BMS CS-M-D12-IQ40-02 BMS CS-M-D12-BX11-09Sensor BOS 5K n
BGL 30C, 50C n
BWL 40/40, 54/54 n
BWL 68/68, 90/90, 110/110 n
BGL 5A, 10A, 20A, 30A, 50A, 80A n
BGL 80A, 120A, 180A, 220A n
BES 40x40, Q40 n n
BES IKU n n
Linear lights: 85mm or 170mm n
Stainless
Steel
36
30
6052.529
4
25.4
10
37.5
10
16.5
20
3× M4
2× M
5
2× Ø3.2
28Ø20
20
3
90°
3
3
13n www.balluff.com
AccessoriesSensor and light mounts
Order code BAM01F3 BAM003F BAM003H BAM003R BAM003P BAM01F2Part description BMS CS-M-D12-BX10-08 BMS BS-M-D12-0250-03 BMS BS-M-D12-0400-04 BMS CS-M-D12-IQ40-03 BMS CS-M-D12-IQ40-02 BMS CS-M-D12-BX11-09Sensor BOS 5K n
BGL 30C, 50C n
BWL 40/40, 54/54 n
BWL 68/68, 90/90, 110/110 n
BGL 5A, 10A, 20A, 30A, 50A, 80A n
BGL 80A, 120A, 180A, 220A n
BES 40x40, Q40 n n
BES IKU n n
Linear lights: 85mm or 170mm n
Stainless
SteelStainless
Steel
35
86
4565 1.5
80 30
60 21
39.8
19.8
14.7
55 60
35
169.5
5
13
40 433126Ø
202× Ø5.6
2× Ø8
6× Ø
5.3
Stainless
Steel
6
15
21
4
4
9.5
67.
5
87.
5
107
.5
12
50
92
100
M4 (4x) M3 (5x)
Ø20
20
58.
25
116
.5 R
14
3
90°
14
AccessoriesRod Clamps and Air Blow Off
Ø16
10.5
10
12
Ø12Ø4.2
Ø32
Connection for compressed air hose Ø 4 mm
Description Rod Clamp Mount Rod Clamp Back Mount Air Blow Off Pivot Mount Pivot Mount Pivot Mount Positioning bracketUse BOS 6K BOS 6K BOS and BOD M12 M18 M30 BOS M18 laserOrder code BAM022C BAM022A BAM0041* BAM01KM BAM00T3 BAM00TN BAM00T2Part number BMS CS-M-D12-S6K-00 BAM MC-XO-030-6K-4 BMS CZ-M-D12-I-001 BOS 12,0-KB-1 BOS 18,0-KB-1 BOS 30,0-KB-1 BOS 18,0-HW-6Material Anodized aluminum Anodized aluminum Anodized aluminum PA-GF PA-GF PA-GF Steel
* Requires BAM003116
11.9
4.5
Ø3.2
16.5
R16
M432 22.912
~ 1
90
Ø 3
0 1
2
40.7
22
5
27
Ø 2
0 Ø 4
4
15n www.balluff.com
AccessoriesPositioning
Ø4.25
50
40
30
42
4030
M18
×1
50
10.8
36.54
106.
5
Description Rod Clamp Mount Rod Clamp Back Mount Air Blow Off Pivot Mount Pivot Mount Pivot Mount Positioning bracketUse BOS 6K BOS 6K BOS and BOD M12 M18 M30 BOS M18 laserOrder code BAM022C BAM022A BAM0041* BAM01KM BAM00T3 BAM00TN BAM00T2Part number BMS CS-M-D12-S6K-00 BAM MC-XO-030-6K-4 BMS CZ-M-D12-I-001 BOS 12,0-KB-1 BOS 18,0-KB-1 BOS 30,0-KB-1 BOS 18,0-HW-6Material Anodized aluminum Anodized aluminum Anodized aluminum PA-GF PA-GF PA-GF Steel
* Requires BAM0031
Object Detection
Linear Position Sensing and Measurement
Fluid Sensors
Industrial Identification
Industrial Networking and Connectivity
Accessories
Systems and Services
USA Balluff Inc. 8125 Holton Drive Florence, KY 41042 Phone: (859) 727-2200 Toll-free: 1-800-543-8390 Fax: (859) 727-4823 E-Mail: [email protected]
Canada Balluff Canada, Inc. 2840 Argentia Road, Unit #2 Mississauga, Ontario L5N 8G4 Phone: (905) 816-1494 Toll-free: 1-800-927-9654 Fax: (905) 816-1411 E-Mail: [email protected]
www.balluff.com
Mexico Balluff de México SA de CV Anillo Vial II Fray Junípero Serra No. 4416Colonia La Vista Residencial.Querétaro, Qro. CP76232 Phone: (++52 442) 212-4882 Fax: (++52 442) 214-0536 E-Mail: [email protected]
Doc. no. 915329/Mat. no. 239887 EN • G14;
Product specifications, availability, and pricing are
subject to change without notice.
Top Related