H1
Spra
y G
un
S
Overview Spray GunsTable of Contents
High Pressure Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H3
Low Pressure Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H5
Low-Medium Pressure Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . H9
Front Shut-Off Spray Gun Extensions . . . . . . . . . . . . . . . . . . . . . . . . H11
Spray Gun Extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H12
Inlet and Outlet Spray Gun Adapters . . . . . . . . . . . . . . . . . . . . . . . . H16
Spray Gun Swivel Connectors and High Pressure Liquid Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H17
Section H – Spray Guns
You’re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns . Options range from a gentle spray to a high-impact solid stream .
All our spray guns are durable and efficient . Many of our guns also offer:
• Specially designed handles to improve control and reduce operator fatigue .
• Smooth-pull triggers to enable accurate and consistent flow control .
• Textured grips to minimize the chance for slippage and accidents .
• Leak-free operation.
A complete line of accessories complements our spray guns . Front shut-off extensions, extensions, inlet/outlet adapters, connectors and strainers are available to ensure easy, trouble-free operation .
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H2
Sp
ra
y G
un
s
• Never point a spray gun at another person or yourself. Injury can result.
• Use the trigger lock feature when the gun is not in use to avoid accidental discharge.
• Add an extension and handle to improve spray gun stability.
• Be sure to use the correct spray gun for your pressure and flow range to ensure safety and achieve maximum performance.
• The use of steam with spray guns is not recommended.
• Spray guns are rated for optimal flow rates. Use tips that match – no performance improvements will result from using a tip with a higher capacity than the spray gun.
• Eliminate water hammer and pressure spikes by using an unloader valve.
• Add a swivel to the hose to ensure easy movement of the spray gun and hose.
• Always use a check valve or similar bypass valve when using high pressures to ensure safety.
• Check and tighten fluid connections if necessary to avoid leaks.
• Use a spray gun with a “weep” feature to prevent freezing in cold environments.
• In-line strainers provide filtering to protect gun and purity of sprayed liquid.
• Proper selection of a spray gun, for your application, will reduce operator fatigue.
Optimization Tips
Spray Guns
Check Valve
Gun Extension
Swivel Accessories
Trigger Lock
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H3
Spra
y G
un
S
See Also http://
• Accessories– Extensions
– Inlet/outlet adapters
– Swivel connectors
PW4000A PW4000AS
30A 60 80
Applications
• Adhesive spraying
• Car wash
• Floor/rug cleaning
• High pressure cleaning
• See page H2 for optimization tips.
Optimization Tips
• Ultimate versatility is available with a complete selection of UniJet® spray tips to meet pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
Features and Benefits
Spray Guns, High Pressure
• Sturdy design and materials including nylon handles and trigger guards, forged brass valve bodies, Buna-N or Viton® stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life.
• Optional “weep” feature (30A and 70) helps prevent freezing in cold conditions.
• Lubricating
• Paint spray
• Pest control
• Pressure wash
70
• AA70 GunJet
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H4
Sp
ra
y G
un
s
Complete Spray Gun aSSembly
aa60 – 3/8l l
GunJetNumber
InletConn.
Ordering Info
High Pressure Model Pressure(psi)
Capacity(gpm)
Temperature°F (°C)
InletConn.
OutletConn.
Length(in.)
Width(in.)
Height(in.)
NetWeight
(oz.)
SpecialFeatures
30A 1500 5 200 (93) 1/4" NPT orBSPT (F) 11/16"–16 THD 8 1-1/8 6-9/16 15
Trigger lock.Nylon handle/trigger guard.
60 2500 6 300 (150) 3/8" NPT orBSPT (F) 11/16"–16 THD 8-3/4 1-7/16 6-1/2 16 Stainless steel body
available.
70 5000 10 300 (150) 3/8" NPT (F) orBSPT (F)
1/4" NPT orBSPT (F) 7.83 1.35 7.56 25
Easy trigger pull.Stainless steel valve
seal and ball.
80 3000 10 300 (150) 3/8" NPT orBSPT (F)
11/16"–16 THDor
1/4", 3/8" NPT orBSPT (F)
9 1-5/8 6-7/8 36 Nylon handle.Trigger guard.
PW4000A 4000 10 300 (150) 1/4", 3/8" NPT orBSPT (F)
1/4", 3/8" NPT orBSPT (F) 8-3/4 1-1/4 7-3/4 24 Fatigue-reducing
trigger.
PW4000AS 4000 10 300 (150) 3/8" NPT orBSPT (F) swivel
1/4", 3/8" NPT orBSPT (F) 8-3/4 1-1/4 7-3/4 24 Bottom trigger pivot
and inlet swivel.
Spray Guns, High Pressure
Specifications
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H5
Spra
y G
un
S
Spray Guns, Low Pressure
Features and Benefits
– For general clean-up applications.
– Offers versatility and maximum comfort.
– Features easy-change color-coded spray caps with three flow capacities.
– Spray pattern can be adjusted from a solid stream to a 50° hollow cone pattern.
– Available with optional repair kits.
– Can be ordered in brass or lightweight aluminum with a corrosion-resistant rubber outer cover.
• All GunJet low pressure spray guns are designed to meet the special needs of low pressure applications.
• Versatile GunJet low pressure spray guns are designed for use with a wide variety of spray tips to meet particular pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
• Sturdy design and materials including nylon and polypropylene handles and trigger guards, forged brass valve bodies, Buna-N or Viton® stem seals, PTFE valve seats and stainless steel working parts mean long, productive equipment life.
• Key feature overview for 23624-30L:– For low pressure spot application of chemicals.
– Features an adjustable metering assembly that enables the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger. Automatically recharges for the next dosage when the trigger is released.
• Key feature overview for CU150A:
• Complete line of accessories for 22650-PP TriggerJet® spray gun:– Extensions: 15" (381 mm) or 24" (610 mm). Part number 22665-PP.
– 45° adapter. Part number 22673-PPB.
– Straight adapter. Part number 22664-PPB.
– Adjustable ConeJet® spray tip. Part number 5500-PPB.
– UniJet® strainer. Part number 8079-50-PP.
• Key feature overview for 23623-31-1/4F:– Provides an adjustable metering assembly which allows
the applicator to discharge precisely metered volumes from 1 to 16 ml with a single pull of the trigger.
– Automatically recharges for the next dosage when the trigger is released.
• Trigger valve inlet handle options for 36, 4688, 6104, 6466 and 6590 with 1/4" NPT or BSPT (M) inlet connections:– Rubber covered handle with a 1/4" NPS (M) hose inlet
connection. Part number 4727.
– 1/8" brass pipe handle. 3/8" ID hose slips easily over the pipe handle. Part number 4725.
– Rubber covered handle with a 3/4" garden hose thread connection. Part number 4754.
– Internal strainer with choice of mesh sizes and a 1/4" NPT or BSPT (F) connection. Part number 5820.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H6
Sp
ra
y G
un
s
Spray Guns, Low Pressure
• See page H2 for optimization tips.
Optimization Tips http://See Also
30-2094030L 30L-PP 23624-30L
60-21580 30L-26323 CU150A
4688 6104 6466 6590
23623-31-1/4F 31-39430 3622650-PP
Applications
• General clean-up
• Low pressure cleaning
• Spot application of chemicals
• Accessories– Extensions
– Inlet/outlet adapters
– Swivel connectors
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H7
Spra
y G
un
S
Low Pressure Model Pressure(psi)
Capacity(gpm)
Temperature°F (°C)
InletConn.
OutletConn.
Length(in.)
Width(in.)
Height(in.)
NetWeight
(oz.)
SpecialFeatures
30L 250 5 200 (93) 1/4" NPT orBSPT (F)
11/16"–16UniJet® THD 8 1-1/8 6-9/16 15
Trigger lock.Nylon handle.Trigger guard.
30L-PP 150 5 120 (50) 1/4" NPT orBSPT (F)
11/16"–16UniJet THD 8 1-1/8 6-9/16 9
Polypropylene handle.Trigger guard.Trigger lock.
23624-30L 75
1 to16 ml
dosagerange
200 (93) 1/4" NPT orBSPT (F)
11/16"–16UniJet THD 9-7/8 2-5/16 6-9/16 24
Adjustable metering.Trigger lock.
Auto recharge.
30-20940 250 10 300 (150) 1/4" NPT orBSPT (F) – 8-5/8 1-1/8 6-9/16 12
Trigger activatedvariable spray pattern.
Trigger lock.
60-21580 250 16 300 (150) 3/8" NPT orBSPT (F) – 9-1/16 1-7/16 6-1/2 19-1/4
Trigger activatedvariable spray pattern.
Trigger lock.
30L-26323 250 5 200 (93) 1/4" NPT orBSPT (F) – 7-7/8 1-1/8 6-9/16 13
Uses Quick UniJetcaps, seat gaskets
and spray tips.Corrosion resistant.
CU150A 150 10 to 22 200 (93) 1/2" NPT orBSPT (F) – 6-1/2 2-1/4 6-1/2 36
Changeable spray caps.Adjustable spray
pattern – solid to 50°hollow cone.
Corrosion resistant.Rubber outer cover
white or black.Repair and replacement
parts available.Also available in
aluminum(weight 22 oz.).
Spray Guns, Low Pressure
Specifications
Complete Spray Gun aSSembly
Cu150a – al – 22l l l
GunJetType
MaterialCode
Capacity
Ordering Info
Complete Spray Gun aSSembly
22650 – pp – 1/4l l l
GunJetType
MaterialCode
InletConn.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H8
Sp
ra
y G
un
s
Specialty Spray GunsLow Pressure
Pressure(psi)
Capacity(gpm)
InletConn.
OutletConn.
SpecialFeatures
23623-31-1/4FMeterJet® 75 1 to 16 ml 1/4" NPT or
BSPT (F)11/16"–16
UniJet® THDAdjustable metering.
Auto recharge.
31-39430 500 5 1/4" NPS orBSPT (M) –
Trigger activated variablespray pattern.
Drip-free shut off.Brass body. Stainless steel trigger.
Buna-N bumper.
22650-PPTriggerJet® 150 2
1/4" or 3/8" hoseor 1/4" NPT or
BSPT (F)
11/16"–16UniJet THD
Corrosion resistantpolypropylene construction.
Trigger lock.UniJet strainer available.
Durable Viton® diaphragm.
36 Trigger Valve 150 7 1/4" or 3/8" NPTor BSPT (F)
1/4" or 3/8" NPTor BSPT (F)
Trigger lock.Brass or stainless steel.
4688 Trigger Valve 250 2 1/4" NPT orBSPT (F)
11/16"–16UniJet THD
Trigger lock.Brass or stainless steel.
6104 Trigger Valve 250 2 1/4" NPT orBSPT (F)
1/4" NPT orBSPT (F)
Trigger lock.Brass or stainless steel.
6466 Trigger Valve 250 2 1/4" NPT orBSPT (F) 11/16"–16 THD Extra long trigger.
6590 Trigger Valve 250 2 1/4" NPT orBSPT (F)
1/4" NPT orBSPT (F) Extra long trigger.
Spray Guns, Low Pressure
Specifications
GunJet spray gun used to clean grease from equipment and floor.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H9
Spra
y G
un
S
Spray Guns, Low-Medium Pressure
43HC
36533-60 43HD43LC43LD
23H
Ordering Info
Complete Spray Gun aSSembly
aa23l – SSl l
GunJetNumber
InletMaterial
Code
• Accessories– Extensions
– Inlet/outlet adapters
– In-line strainers
– Swivel connectors
See Also http://
• See page H2 for optimization tips.
Optimization Tips
23L 31AA23L-45885
Features and Benefits
• All are designed for use with UniJet® spray tips to meet a wide variety of pattern and flow specifications.
• Available outlet adapters convert any standard thread allowing the attachment of many optional accessories.
• Standard one-piece nozzles, such as VeeJet® flat spray nozzles, can be used when mated with proper adapters.
• Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions.
• For safety, trigger guards are designed to prevent accidental discharge.
• Sturdy design and materials including nickel-plated, brass or stainless steel inlet bodies, PTFE or nylon valve seats and stainless steel stems and brass guides mean long, productive equipment life.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H10
Sp
ra
y G
un
s
Low-Medium Pressure Model Pressure
(psi)Capacity
(gpm)Temperature
°F (°C)Inlet
Conn.OutletConn.
Length(in.)
Width(in.)
Height(in.)
NetWeight
(oz.)
SpecialFeatures
23L 250 5 200 (93) 1/4" NPS (M) 11/16"–16UniJet® THD 6 1-1/16 7-1/4 15
Aluminum alloyhandle.
PTFE valve seat.Stainless steel stem.
Brass guide.Nickel-plated
inlet body.
AA23L-45885 250 0.7 200 (93) 1/4" NPS (M) 11/16"–16
UniJet THD 6 1-1/16 7-1/4 16
Drop adjustingnut.
Tapered needle.Captured
valve seat.Nickel-plated
inlet body.
23H 1000 5 200 (93) 1/4" NPS (M) 11/16"–16UniJet THD 6 1-1/16 7-1/4 16 –
31 500 5 –1/4" NPS (M) or
NPT orBSPT (F)
11/16"–16UniJet THD 5-1/2 1 3-1/4 12-1/2
Drip-freeshut-off.
Trigger lock(optional).
36533-60 600 12 200 (93) 3/8" NPT orBSPT (F)
11/16"–16UniJet THD 8-3/4 1-7/16 6-1/2 16
Durable nylonhandle/trigger
guard.Trigger lock
“off”.
43LD 200 15 200 (93) 1/2" NPT orBSPT (F)
11/16"–16UniJet THD 8 1-3/8 8-3/8 35-1/4 Trigger lock.
Brass inlet body.
43LC 200 15 200 (93) 1/2", 3/4" NPT orBSPT (F)
1/2", 3/4" NPT orBSPT (F) 8 1-3/8 8-3/8 35-1/4 –
43HD 800 15 200 (93) 1/2" NPT orBSPT (F)
11/16"–16UniJet THD 9 1-3/8 8-3/8 35-1/4 –
43HC 800 15 200 (93) 1/2", 3/4" NPT orBSPT (F)
1/2", 3/4" NPT orBSPT (F) 9 1-3/8 8-3/8 35-1/4 –
Spray Guns, Low-Medium Pressure
Specifications
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H11
Spra
y G
un
S
GunJetModel
GunJet PlusExtension
Type
Pressure(psi)
Capacity(gpm)
Temperature°F (°C)
InletConn.
OutletConn.
ExtensionLengths
(in.)
GunJetMaterial
ExtensionMaterial
SpecialFeatures
23L-7676AA23L-7676 or
AA23L-SS-7676-SS
250 5 200 (93) 1/4" NPS (M) 11/16"–16UniJet® THD
8, 18, 24, 36, 48
Brass or303 Stainless
Steel
Brass orstainless
steel
Drip-free shut-offwith valve stemextending full
length of extension.
30L-22425 AA30L-22425 150 5 120 (50) 1/4" NPT orBSPT (F)
11/16"–16UniJet THD
8, 18, 24, 36,48, 60, 72 Brass Brass
31-12090 AA31-12090 500 5 200 (93) 1/4" NPS (M)
1/4" NPT orBSPT (F) or11/16"–16
UniJet THD
8, 18, 24, 36 Brass Brass
• See page H2 for optimization tips.
Optimization Tips http://See Also
Complete Spray Gun aSSembly
aa23l – SS – 7676 – 18 – SSl l l l l
GunJetType
MaterialCode
ExtensionType
ExtensionLength
MaterialCode
Ordering Info
Spray Guns – Front Shut-Off Extensions
• Data Sheet 7676
• Data Sheet 30L-22425
• Data Sheet 12092
Specifications
23L-7676 30L-22425 31-12090
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H12
Sp
ra
y G
un
s
Spray Gun Extensions
Gun Extension ExtensionNo.
MaximumPressure
(psi)
InletConn.
OutletConn.
ExtensionMaterial
SpecialFeatures
9004-SS 4000 11/16"–16UniJet® THD
11/16"–16UniJet THD Stainless steel –
11806 4000
11/16"–16UniJet THD
1/4" NPS (M)liquid recirculating
11/16"–16UniJet THD
1/4" NPS (M)liquid recirculating
BrassStainless steel
only available in8" length.
15250 3000 3/8" NPTor BSPT (M)
11/16"–16UniJet THD
Stainless steelor
zinc-plated steelAdjustable hand grip.
20400 3000 1/4" NPTor BSPT (M)
1/4" NPT or BSPT (M)or
1/8" NPT or BSPT (F)
Stainless steelor
zinc-plated steel–
13781S 2000 11/16"–16UniJet THD – Mild steel
Usually supplied with7890 inlet cap and
13783 hollow cone spray tip(order cap and tip separately).
Refer to Data Sheet 13775.
9702S 2000 11/16"–16UniJet THD – Mild steel
Usually supplied with7890 inlet cap and a
tungsten carbide spray tip(order cap and tip separately).
Refer to Data Sheet 9702-1.
9702A 2000 11/16"–16UniJet THD – Mild steel Projects spray
at 90° angle.
9702C 2000 11/16"–16UniJet THD – Mild steel Curved body.
15699 1000 11/16"–16UniJet THD
11/16"–16UniJet THD Brass
Rubber insulated(48" length
not rubber insulated).
Specifications
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H13
Spra
y G
un
S
Spray Gun Extensions
Specifications
Gun Extension ExtensionNo.
Pressure(psi)
InletConn.
OutletConn.
ExtensionMaterial
SpecialFeatures
9527 1000 11/16"–16UniJet® THD
11/16"–16UniJet THD Brass Curved, rubber
insulated.
CP12087 1000 1/4" NPT orBSPT (M)
1/4" NPT orBSPT (M) Aluminum –
12086 1000 11/16"–16UniJet THD
11/16"–16UniJet THD Brass –
7715
250 11/16"–16UniJet THD
11/16"–16UniJet THD
Brass 8", 12", 18",24", 30", 36" and 48" –
500 11/16"–16UniJet THD
11/16"–16UniJet THD
Brass (8", 12", 18", 24", 36" and
48" lengths alsoavailable in
stainless steel)
–
14975 250 11/16"–16UniJet THD
1/8" NPT orBSPT (M) Brass –
6671 125 11/16"–16UniJet THD
11/16"–16UniJet THD
Brass(36" lengths
also available in stainless steel)
Curved body.
4673 125 11/16"–16UniJet THD
11/16"–16UniJet THD Brass Curved with swivel
nozzle body.
6960 100 11/16"–16UniJet THD
11/16"–16UniJet THD Brass Siphon with
adjustable flow.
22665 150 11/16"–16UniJet THD
11/16"–16UniJet THD Polyester –
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H14
Sp
ra
y G
un
s
ExtensionNo.
LengthAvailable
(in.)
Spray Guns
22AUH 24AUA 30 60 80 23 43LD 43-11767-1/4
43-11767-3/8 43-12605 31 36-
1/4 4688 6466 6104 6590 22650
9004-SS
8 l l l l l l l l l l l
12 l l l l l l l l l l l
18 l l l l l l l l l l l
24 l l l l l l l l l l l
36 l l l l l l l l l l l
11806
8 l l l l l l l l l l l
12 l l l l l l l l l l l
18 l l l l l l l l l l l
24 l l l l l l l l l l l
36 l l l l l l l l l l l
1525018 l l
36 l l
20400-1/4M
18 l* l* l l l l l
36 l* l* l l l l l
20400-1/8F
18 l* l* l l l l l
36 l* l* l l l l l
13781S
10 l l l l l l l l l
16 l l l l l l l l l
48 l l l l l l l l l
9702S
10 l l l l l l l l l
24 l l l l l l l l l
48 l l l l l l l l l
60 l l l l l l l l l
9702A
10 l l l l l l l l l
24 l l l l l l l l l
48 l l l l l l l l l
60 l l l l l l l l l
9702C
10 l l l l l l l l l
24 l l l l l l l l l
48 l l l l l l l l l
60 l l l l l l l l l
15699
8 l l l l l l l l
18 l l l l l l l l
24 l l l l l l l l
36 l l l l l l l l
48 l l l l l l l l
9527
8 l l l l l l l l
18 l l l l l l l l
24 l l l l l l l l
36 l l l l l l l l
48 l l l l l l l l
*Use with 14643-1/4-SSP stainless steel adapter.
Spray Gun Extensions
Spray Gun Compatibility
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H15
Spra
y G
un
S
Spray Gun Extensions
Spray Gun Compatibility
ExtensionNo.
LengthAvailable
(in.)
Spray Guns
22AUH 24AUA 30 60 80 23 43LD 43-11767-1/4
43-11767-3/8 43-12605 31 36-
1/4 4688 6466 6104 6590 22650
CP12087
8 l l l l
18 l l l l
24 l l l l
36 l l l l
12086
8 l l l l l l
18 l l l l l l
24 l l l l l l
36 l l l l l l
7715
8 l l l l l l
12 l l l l
18 l l l l
24 l l l l
30 l l l l
36 l l l l
48 l l l l
14975 18 l l l l l l
6671
8 l l l l l l
18 l l l l l l
24 l l l l l l
30 l l l l l l
36 l l l l l l
48 l l l l l l
4673
8 l l l l l l
18 l l l l l l
24 l l l l l l
30 l l l l l l
36 l l l l l l
48 l l l l l l
72 l l l l l l
6960 8-1/2 l l l l l l
2266515 l
24 l
Complete extension Assembly
7715 – 18 – ssl l l
ExtensionType
ExtensionLength
MaterialCode
Ordering Info
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H16
Sp
ra
y G
un
s
Spray Gun Inlet and Outlet Adapters
Ordering Info
Complete AdApter Assembly
4676 – 1/8 – ssl l l
AdapterType
InletConn.
MaterialCode
• Data Sheet 7035
• Data Sheet 13223
• Data Sheet 14353
• Data Sheet 10896
• Data Sheet 14721
• Data Sheet 15578
• Data Sheet 7599
See Also http://
Optimization Tips
• See page H2 for optimization tips.
13212 14269 46767029
3/4" garden hose thread (F)inlet connection
1/2" NPT or BSPT (M)outlet connection
3/4" garden hose thread (F)inlet connection
3/8", 1/2" NPT or BSPT (M)outlet connection
3/4" garden hose thread (F)inlet connection
1/4" NPS (F) or 1/4" NPT (F)outlet connection
11/16"–16 THD UniJet® (F)inlet connection
1/8", 1/4", 3/8", 1/2", 3/4"NPT or BSPT (F) outlet conn.
1099714643 15572 7599
11/16"–16 THD UniJet (F)inlet connection
1/8", 1/4" NPT or BSPT (F)outlet connection
11/16"–16 THD UniJetinlet connection
11/16"–16 THD UniJetoutlet connection
1/4", 3/8" NPT or BSPT (F)inlet connection
1/4" NPS (F)outlet connection
1"–14 (M)inlet connection
1/4", 3/8" NPT or BSPT (F)outlet connection
Spray GunInlet/Outlet
AdapterModel No.
InletConn.
OutletConn.
MaximumPressure
(psi)Material
7029 3/4" garden hosethread (F)
1/2" NPTor BSPT (M) 800 Brass
13212 3/4" garden hosethread (F)
3/8", 1/2" NPTor BSPT (M) 150 Brass
14269 3/4" garden hosethread (F)
1/4" NPS (F)or 1/4" NPT (F) 125 Brass
4676 11/16"–16 THDUniJet (F)
1/8", 1/4", 3/8",1/2", 3/4" NPTor BSPT (F)
1000Brass and
nickel-platedbrass
2000 303Stainless Steel
125 Nylon
14643 11/16"–16 THDUniJet (F)
1/8", 1/4" NPTor BSPT (F) 4000 Nickel-plated
steel
15572 11/16"–16 THDUniJet
11/16"–16 THDUniJet 800 Brass
7599 1/4", 3/8" NPTor BSPT (F) 1/4" NPS (F)
1000 Nickel-platedbrass
2000 Polishedstainless steel
10997 1"–14 (M) 1/4", 3/8" NPTor BSPT (F) 3000 Stainless steel
Specifications
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H17
Spra
y G
un
S
11990 15950 21550
Spray Gun Swivel Connectors and High Pressure Liquid Strainers
36466 36466L 364679765
1/4" NPS (M) inlet connection1/4" NPS (F) outlet connection
1/2", 5/8", 3/4" garden hoseID inlet conn. (1-3/16" long)
1/2" NPT or BSPT (M)threaded outlet conn.
3/4" garden hoseID inlet conn. (2-7/16" long)
1/2" NPT or BSPT (M)outlet connection
3/4" garden hose thread(F) inlet connection
1/2" NPT (M)threaded outlet conn.
3/8" NPT or BSPT (M) inlet conn.3/8" NPT or BSPT (F) inlet conn.
1/4", 3/8" NPT or BSPT (F)inlet connection
1/4", 3/8" NPT or BSPT (M)outlet connection
GunJet spray gun used in automotive industry to attach backing, foam and fabric to seats.
1/4"NPT orNPS (F)
outlet conn.
1/4" to 1/2"NPT orNPS (F)
outlet conn.
1/4" to 1/2"NPT or
BSPT (M)inlet conn.
1/4" to 1/2"NPT or
BSPT (F)inlet conn.
1/4"NPS (M)
outlet conn.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H18
Sp
ra
y G
un
s
22629-SS
See Also
• Data Sheet 15950
• Data Sheet 21550
• Data Sheet 9765
• Data Sheet 21550-90
• Data Sheet 36560
• Data Sheet 8510
• Data Sheet 9770
http://
Optimization Tips
• See page H2 for optimization tips.
Spray Gun Swivel Connectors and High Pressure Liquid Strainers
1/4", 3/8" NPT (M)inlet connection
3/8" NPT or BSPT (F)outlet connection
3/8" NPT (M) inlet conn.3/8" NPS (F) outlet conn.
Strainer1/4" NPS (M) inlet conn.1/4" NPS (F) outlet conn.
Strainer1/4" NPS (M) inlet conn.1/4" NPS (F) outlet conn.
36560 8510 977021550-90NP
22629 swivel nut branch tee is used with AA26AUH-24200 electric automatic spray
guns to provide liquid recirculation.
GunJet spray gun used to clean floors and equipment.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H19
Spra
y G
un
S
Spray Gun Swivel Connectors and High Pressure Liquid Strainers
ModelNo.
InletConn.
OutletConn.
MaximumPressure
(psi)
Temperature°F (°C) Material Special
Features
11990
1/4" to 1/2" NPT or BSPT (F) –
1000 180 (82) BrassLeakproof hose, 360° swiveleliminates hose kinking and
operator fatigue.
– 1/4" NPT or NPS (F)
1/4" to 1/2" NPT or BSPT (M) –
– 1/4" NPS (M)
– 1/4" to 1/2" NPT or NPS (F)
15950 3/8" NPT or BSPT (M) 3/8" NPT or BSPT (F) 3000 200 (93) Brass or stainless steel –
21550 1/4", 3/8" NPT or BSPT (F) 1/4", 3/8" NPT or BSPT (M) 1500 200 (93) Brass –
9765 1/4" NPS (M) 1/4" NPS (F) 4000 – Stainless steel –
36466 1/2", 5/8", 3/4" garden hose ID(1-3/16" long)
1/2" NPT or BSPT (M)threaded 150 – Brass –
36466L 3/4" garden hose ID(2-7/16" long) 1/2" NPT or BSPT (M) 150 – Brass Lock ring secures trigger of CU150A
in fully engaged position.
36467 3/4" garden hose thread (F) 1/2" NPT (M) threaded 150 – Brass For use with CU150A spray gun.
21550-90NP 1/4", 3/8" NPT (M) 3/8" NPT or BSPT (F) 1500 200 (93) Delrin® bearings andBuna-N O-ring Ceiling-mount.
36560 3/8" NPT (M) 3/8" NPS (F) 2000 200 (93) Nickel-plated brass Boom swivel designedfor ceiling mount.
8510 Strainer 1/4" NPS (M) 1/4" NPS (F) 4000 – Stainless steelChoice of screen mesh sizes.
Internal support prevents screen collapse at high pressure.
9770 Strainer 1/4" NPS (M) 1/4" NPS (F) 4000 – Stainless steelNon-clogging tip protection and effortless handling of spray gun
without twisting hose.
22629-SS 1/2"-20 J.I.C. (M) 1/2"-20 J.I.C. (F) 2000 – Stainless steel Branch tee for AA26AUH-24200for liquid recirculation.
Spray Gun ConneCtorS
11990-6l
Swivel Type
Ordering Info
Call for ordering information for other swivels and strainers.
Specifications
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
H20
Sp
ra
y G
un
s
Connection Type Swivel Ordering No.Connections
Approx. Overall Length(in.)
For Hose ID(in.)Thread Sizes
(NPT/BSPT or NPS)Shank Dia.
(in.)
Female x Hose Shank11990-60 1/4" (F) NPS .281 2-5/8 1/4
11990-61 1/4" (F) NPS .406 2-3/4 3/8
Male x Hose Shank
11990-62 1/4" (M) NPT/BSPT .281 2-5/16 1/4
11990-63 1/4" (M) NPS .281 2-3/8 1/4
11990-64 1/4" (M) NPT/BSPT .406 2-15/32 3/8
11990-65 1/4" (M) NPS .406 2-17/32 3/8
Connection Type Swivel Ordering No. Connection Thread Sizes (NPT/BSPT or NPS) Approx. Overall Length(in.)
Female x Female
11990-7 1/4" (F) NPT/BSPT 1/4" (F) NPT/BSPT 2-1/16
11990-10 1/4" (F) NPT/BSPT 1/4" (F) NPS 2
11990-14 3/8" (F) NPT/BSPT 3/8" (F) NPT/BSPT 2
11990-17 1/2" (F) NPT/BSPT 1/2" (F) NPT/BSPT 2-5/16
11990-20 3/8" (F) NPT/BSPT 1/4" (F) NPS 1-3/4
Male x Male
11990-8 1/4" (M) NPT/BSPT 1/4" (M) NPT/BSPT 2-1/4
11990-13 1/4" (M) NPT/BSPT 1/4" (M) NPS 2-1/4
11990-15 3/8" (M) NPT/BSPT 3/8" (M) NPT/BSPT 2-5/16
11990-18 1/2" (M) NPT/BSPT 1/2" (M) NPT/BSPT 2-3/4
Male x Female
11990-6 1/4" (M) NPS 1/4" (F) NPS 2-1/16
11990-9 1/4" (M) NPT/BSPT 1/4" (F) NPT/BSPT 2-3/16
11990-12 1/4" (M) NPT/BSPT 1/4" (F) NPS 2-1/8
11990-16 3/8" (M) NPT/BSPT 3/8" (F) NPT/BSPT 2-1/4
11990-19 1/2" (M) NPT/BSPT 1/2" (F) NPT/BSPT 2-5/8
11990-21 3/8" (M) NPT/BSPT 1/4" (F) NPS 2
Spray Gun Swivel Connectors and High Pressure Liquid Strainers
11990 Specifications
GunJet spray gun used to remove sand particles from casting molds.
Phone 1-800-95-spray, FAX 1-888-95-sprayVisit Our Web Site: www.spray.com, Email: [email protected]
Top Related