Seamless hot rolled tubes and seamless hollow bars
1
An internationally operating stockholding company of carbon alloy and stainless steel tubes
With 50 locations in more than 30 countries the company ranks among the leading global
distribution companies. Our core business is the reliable supply of high-quality steel
tubes supplemented by comprehensive services precisely tailored to the customers
requirements. Offering competent consultancy, bundled sourcing, tailor-made stocking
and customised logistics, Benteler Distribution has gained a high reputation as a reliable
supplier of high-quality steel tubes to a wide range of industries.
In everything we do we are committed to meeting national and international standards.
Our documented processes are certified according to the norm DIN EN ISO 9001. This
commitment to quality is shared by our suppliers who undergo our regular quality checks.
Steel tubes in a wide variety of qualities and dimensions - we have access to group stocks in excess of over 100,000 tons
The choice of the right material determines the quality and profitability of your end
product. Our wide assortment and technical expertise enable us to supply you reliable
and producer independent with customised steel tube solutions. Due to a close coopera-
tion with worldwide leading steel tube producers we are also able to provide you with
special grades and dimensions at short notice and assist you if desired in product
development.
Our proximity to the procurement and sales market allows us to react in time on changing
requirements and to pursue technical developments at an early stage as well as to
exploit the full potential of the material. In this sense we consider ourselves an initiator
for our customers. We want to supply you with high quality and technologically
advanced steel tube solutions.
Benteler Distribution
Customised steel tube solutions
2
The reliable supply of
high-quality steel tubes and
customised service solutions
is the promise we make to
our customers in more than
30 countries.
3
Seamless hot rolled tubes
Delivery program
Seamless hot rolled tubes for steel constructions
Standard EN 10210-1/-2
Dimensions 25 x 3.2 mm to 660 x 100 mm
other dimensions on request
Lengths 4 to 15 m
other lengths and fixed lengths on request
Materials Material number
1.0576
1.0539
other materials on request
Steel grade (EN)
S355 J2H
S355 NH
Marking manufacturer stamp, EN standard, material, delivery condition, size,
heat number or identification number
Testing on request
Certification 3.1 acc. to EN 10204
other certifications on request
Seamless hot rolled tubes for pressure requirements
Standard (part 1) EN 10216-1
Dimensions 25 x 3.2 mm to 660 x 100 mm
other dimensions on request
Lengths 4 to 15 m
other lengths and fixed lengths on request
Materials Material number
1.0254
1.0258
Steel grade (EN)
P235 TR 1 + TR 2
P265 TR 1
other materials on request
Standard (part 3) EN 10216-3
Dimensions 10.2 x 1.6 mm to 711 x 100 mm
other dimensions on request
Lengths 4 to 15 m
other lengths and fixed lengths on request
Materials Material number
1.0562
Steel grade (EN)
P355 N TC1 (usually in
combination with E355 N
and S355 J2H)
other materials on request
Marking manufacturer stamp, EN standard, material, delivery condition, size,
heat number or identification number
Certification 3.1 acc. to EN 10204, other certifications on request
4
Seamless hot rolled tubes for mechanical engineering
Standard EN 10297-1
Dimensions 25 x 3.2 mm to 660 x 100 mm
other dimensions on request
Lengths 4 to 15 m
other lengths and fixed lengths on request
Delivery conditions +AR
+N
other delivery conditions on request
Materials Material number
1.0308
1.0580
1.0536
other materials on request
Steel grade (EN)
E235
E355
E470
Marking manufacturer stamp, EN standard, material, delivery condition, size,
heat number or identification number
Testing water pressure testing or leak testing acc. to EN ISO 10893-1
other testing on request
Certification 3.1 acc. to EN 10204
other certifications on request
Seamless steel tubes for machining
Standard EN 10294-1
Dimensions 30 x 20 mm to 250 x 120 mm
other dimensions on request
Lengths 4 to 8 m
other lengths and fixed lengths on request
Materials Material number Steel grade (EN)
1.0580
1.0592
1.0599
1.0536
1.0644
E355
E355 J2
E420 J2
E470
E590 K2
other materials on request
Marking manufacturer stamp, EN standard, material, delivery condition, size,
heat number or identification number
Testing on request
Certification 3.1 acc. to EN 10204
other certifications on request
5
Chemical composition (cast analysis) in % by mass
C Si Mn P S Nb V Al / Al tot Ti Cr Ni Mo Cu N
min. max. min. max. min. max. max. min. max. max. min. max. min. max. max. max. max. max. max. max.
EN 10210-1/2 S355 J2H
0.22 0.55 1.60 0.030 0.030
EN 10297-1 E355 +N
0.22 0.55 1.60 0.030 0.035
EN 10216-3 P355N TC1
0.20 0.50 0.90 1.70 0.025 0.020 0.05 0.10 0.020 0.04 0.30 0.50 0.08 0.30 0.020
EN 10294-1 E470
0.16 0.22 0.10 0.50 1.30 1.70 0.030 0.015 0.050 0.07 0.08 0.15 0.010 0.020
Notes:- The above is subject to additonal rules concerning the lesser elements (% by mass).- In case of dispute the permissable deviations of a product analysis from the limits on cast analysis are specified.- Elements not included in this table shall not be intentionally added to the steel without the agreement
of the purchaser, excpet for elements which may be added for finishing the cast.- All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or
other materials used in the steel making process.
Minimum mechanical properties
Yield strength n/mm2 (ReH )
WT up to 16 mm WT over 16 mm and up to 40 mm
WT over 40 mm and up to 65 mm
WT over 65 mm and up to 80 mm
WT over 80 mm and up to 100 mm
EN 10210-1/2 S355 J2H (a,b,c) 355 345 335 (to 63 mm) 325 315
EN 10297-1 E355 +N 355 345 335 315 295
EN 10216-3 P355N TC1 (c,d) 355 (to 20 mm) 345 335 / 325 (to 50 mm) 315 305
EN 10294-1 E470 (f) 470 460 / 430 (25 mm) 430 (50 mm max)
Tensile strength n/mm2 Elongation % Impact properties
WT up to 16 mm
WT over 16 mm and up to 40 mm
WT over 40 mm and up to 65 mm
WT over 65 mm and up to 100 mm
longitudinal transverse Test temperature degrees C
Minimum average absorbed energy (J) for standard test pieces
EN 10210-1/2 S355 J2H (a,b,c) 470 to 630 22 / 21 / 20 20 / 19 / 18 -20 27
EN 10297-1 E355 +N 490 470 20 18
EN 10216-3 P355N TC1 (c,d) 490 to 650 (to 20 mm)
490 to 630 450 to 590 22 20 -20 40
EN 10294-1 E470 (f) 650 620 / 600 (25 mm)
550 (50 mm max)
17
(a) For the elongation data the first figure relates to wall thicknesses up to 40 mm: the second figure is for wall thicknesses over 40 mm and up to 63 mm; the third figure is for wall thicknesses over 63 mm and up to 100 mm.
(b) Impact tests are not required for specified thicknesses less than 6 mm.(c) The mean value of the three test pieces shall meet the requirements. One individual value may be below the specified value,
provided it is not less than 70% of that value.(d) Impact energy for the longitudunal direction and for wall thicknesses up to 40 mm, minimum impact energy in the transverse direction is 27J.(f) The elongation may also be determined in the transverse direction. In this case the minimum values to be achieved shall be those for the
longitudunal direction minus 2 points.
Seamless hot rolled tubes
Technical information
6
Tolerances
EN 10210-1/2 S355 J2H
Characteristics Tolerances
Outside diameter +/- 1% with a minimum of +/- 0.5 mm and a maximum of +/- 10 mm
Thickness - 10% (a, b)
(a) The positive deviation is limited by the tolerance on mass (+8% on individual delivered lengths).(b) For thicknesses of less than 10%, but not less than 12.5% of the nominal thickness may occur in smooth transition areas over not more the
25% of the circumference.
EN 10297-1 E355 +N
OD(mm)
Tolerances on OD Tolerances on WT for a WT / OD ratio
up to 0.025 over 0.025 and up to 0.05 above 0.05
up to 219.1 mm +/- 1% or +/- 0.5 mm whichever is the greater +/- 12.5% or +/- 0.4 mm whichever is the greater
above 219.1 mm +/- 1% +/- 20% +/- 15% +/- 12.5%
EN 10216-3 P355N TC1
OD(mm)
Tolerances on OD Tolerances on WT for a WT / OD ratio
up to 0.025 over 0.025 and up to 0.05 over 0.05 and up to 0.1 over 0.1
up to 219.1 mm +/- 1% or +/- 0.5 mm whichever is the greater
+/- 12.5% or +/- 0.4 mm whichever is the greater
over 219.1 mm +/- 20% +/- 15% +/- 12.5% +/- 10.0% *
* For ODs equal or greater than 355.6 mm it is permitted for the upper wall thickness to be exceeded locally by a further 5% of the wall thickness.
EN 10294 E470
Delivered OD Tolerances on OD Tolerances on WT
up to 75 mm +/- 0.5 mm WT up to 15 mm:
Top Related