1
Scientific Method & Measurement
Chemistry
Scientific Method Observation
Hypothesis
Experiment Theory Law
If hypothesis is false, propose new hypothesis.
Must repeat several times.
Models, Laws & Theories
model: visual, verbal and/or mathematical explanation
of data; can be
-tested
-used to make predictions
theory: explanation based on supported hypothesis
-broad principle of nature supported over
many years
-can be modified
-can lead to new conclusions
3
Models, Laws & Theories
law: describes something known to happen without
error
-doesn’t explain why it happens
-there are no exceptions
-several scientists come to the same conclusion
4
Data
When making observations or gathering information, we separate the data into 2 types:1. qualitative-uses the 5 senses
-physical characteristics
2. quantitative-numerical data -measurable
Variables
There are 2 types of variables when doing an experiment:1. independent: variable you change2. dependent: variable that changes due to a change in the independent variable.
It is also important to have controls, or standards for comparison.
7
Significant Figures
significant figures: number of all known digits in a measurement plus one estimated digit.
-allows more precision in measurement
-not all measuring devices show the same precision
Example: In the following measurement, what are the known values and what is the estimated value?
16.25 mL
known = 162
estimated = 5
8
Significant Figures-Rules
The easiest way to determine significant figures of a given number is by using the Pacific/Atlantic rules.
1. Decimal point PRESENT, start from the PACIFIC. -Begin counting on the left hand (Pacific) side of the number. Move toward the right and start with the first nonzero number. 306.4000 has 7 significant figures
0.00040 has 2 significant figures
9
Significant Figures-Rules
2. Decimal point ABSENT, start from the ATLANTIC.
-Begin counting on the right hand (Atlantic) side of
the number. Move toward the left and start with
the first nonzero digit.
1200 has 2 significant figures
1207 has 4 significant figures
Zeros that act as placeholders are not significant:
0.00040and 1200
10
Significant Figures Practice 1
Determine the number of significant figures in the following numbers.
1) 0.02 4) 501.0 7) 0.0005
2) 0.020 5) 5000 8) 0.1020
3) 501 6) 5000.
Determine the number of significant figures in the following numbers.
9) 8040 12) 2.00x102 15) 0.000410
10) 0.0300 13) 0.90100
11) 699.5 14) 90100
Copy the following questions and answer.
11
Significant Figures and Rounding
Suppose you are asked to find the density of an object with a m=of 22.44 g and whose V=14.2 cm3.
Using a calculator, you get 1.5802817, which has 8 significant figures. Does this answer make sense?
No. The mass only has 4 sig figs and the volume has 3. Your answer would be more precise than the starting information.
12
Significant Figures and Rounding
How would you correctly round this?
By using the starting data with the fewest sig figs (when multiplying/dividing), which is 3: 1.58 g/cm3
-when adding/subtracting, your answer will have the smallest number of decimal places based on the starting information.
3.12 m + 3.2 m = 6.32 m = 6.3 m
13
Significant Figures Practice 2
Perform the following operations expressing the answer in the correct number of significant figures.
1) 1.35 m x 2.467 m
2) 1035 m2 ÷ 42 m
3) 12.01 mL + 35.2 mL + 6 mL
4) 55.46 g – 28.9 g
5) 1.278x103 m2 ÷ 1.4267x102 m
Round all numbers to four significant figures.
6) 84791 kg 8) 0.0005481 g 10) 136758 m
7) 38.5432 g 9) 4.9356 mL
SI Units and Derived Units
Unit Quantity Symbol Unit Abbrev.
length l meter m mass m kilogram kg
time t second s
temperature T Kelvin K
amount of substance
n mole mol
electric current
I ampere A
luminous intensity
Iv candela cd 14
The SI base unit is the unit in a system of measurements that is based on an object or event in the physical world.
Temperature
There are three possible temperature scales:
1.Celsius-based on metric system
-based on temp when water freezes and
boils
2.Kelvin-SI Unit
-based on the idea of absolute zero, the
lowest possible theoretical temperature
-will discuss more in Ch 14 (Gas Laws)
3. Farenheit-what we are used to using
15
Converting Temperature
1. Celsius to Kelvin / Kelvin to Celcius
TK = TC + 273.15
TC = TK - 273.15
2. Celsius to Farenheit / Farenheit to Celsius
TC = (TF -32oF)5oC
9oF
TF = TC 9oF + 32oF
5oC
16
17
SI Units and Derived Units
Not all quantities can be measured with base units.
derived unit: unit that is defined by a combination of base units
-volume: space occupied by an object; unit is the liter, L, for liquids and gases, or cubic centimeter, cm3, for solids
V = l x l x l
-density: ratio of the mass of an object to its volume; unit is g/mL or g/cm3 since 1 mL = 1cm3
D = m/V
PrefixesPrefix Symbol Meaning Multiple of Base Unit 10n
yotta- Y septillion 1,000,000,000,000,000,000,000,000 1024
zetta- Z sextillion 1,000,000,000,000,000,000,000 1021
exa- E quintillion 1,000,000,000,000,000,000 1018
peta- P quadrillion 1,000,000,000,000,000 1015
tera- T trillion 1,000,000,000,000 1012
giga- G billion 1,000,000,000 109
mega- M million 1,000,000 106
kilo- k thousand 1000 103
hecto- h hundred 100 102
deca- da ten 10 101
base deci- d tenth 0.1 10-1
centi- c hundredth 0.01 10-2
milli- m thousandth 0.001 10-3
micro- millionth 0.000 001 10-6
nano- n billionth 0.000 000 001 10-9
pico- p trillionth 0.000 000 000 001 10-12
femto- f quadrillionth 0.000 000 000 000 001 10-15
atto- a quintillionth 0.000 000 000 000 000 001 10-18
zepto- z sextillionth 0.000 000 000 000 000 000 001 10-21
yokto- y septillionth 0.000 000 000 000 000 000 000 001 10-24
Converting Between Prefixes
Dimensional analysis is a method of problem-solving that focuses on the units used to describe matter.
A conversion factor is a ratio of equivalent values used to express the same quantity in different units.
-they change the units of a quantity without changing its value
-ratio of units, such as 1 km
1000m
-set up so the units you don’t need cancel out
48 m x 1 km = 0.048 km
1000 m
19
Dimensional Analysis
It is common in scientific problems to use dimensional analysis to convert more than one unit at a time.
What is the speed of 550 m/s in km/min?
1.Convert m to km
2.Convert s to min
20
Dimensional Analysis
Sometimes we need to convert from metric to standard (and vice versa).
-some of these common conversions you will need to know are:
1 cm3 = 1 mL 60 s = 1 min
1 in = 2.54 cm 60 min = 1 hr
1 ft = 12 in
Practice:
1.152 cm = ____ m 3. 152 s = ____ hr
2.42.5 in = ____ ft 4. 15 mL = ____ cm3
21
22
Accuracy and Precision
accuracy: how close a measured value is to an accepted value.
precision: how close a series of measurements are to one another.
-may not be accurate
Example: For the following data, the actual density value is 1.59 g/cm3.
Density collected by Three Students.
A B C
T1 (g/cm3) 1.54 1.40 1.70
T2 (g/cm3) 1.60 1.68 1.69
T3 (g/cm3) 1.57 1.45 1.71
Avg. (g/cm3) 1.57 1.51 1.70
23
Percent Errorpercent error: ratio of the difference in the measured
value and accepted value divided by the accepted value multiplied by 100
% error = │measured value – accepted value│ x 100 accepted value
Ex: Calculate the % error of Student A’s Average Data. % error = │1.57 g/cm3 – 1.59 g/cm3 │ x 100
1.59 g/cm3
= │-0.02 g/cm3 │ x 100 1.59 g/cm3
= 0.02 g/cm3 x 100 1.59 g/cm3
= 1 %
24
Accuracy & Precision Practice
Density collected by Three Students.
A B C
T1 (g/cm3) 1.54 1.40 1.70
T2 (g/cm3) 1.60 1.68 1.69
T3 (g/cm3) 1.57 1.45 1.71
Avg. (g/cm3) 1.57 1.51 1.70
Calculate the percent error for each of the three students (A, B, C). The accepted value is 1.59 g/cm3)
25
Graphing-You Try
Graph the data set A for T1, T2, and T3 using the rules you know.
Density collected by Three Students.
A B C
T1 (g/cm3) 1.54 1.40 1.70
T2 (g/cm3) 1.60 1.68 1.69
T3 (g/cm3) 1.57 1.45 1.71
Avg. (g/cm3) 1.57 1.51 1.70
26
Graphing
In chemistry, we mainly deal with line graphs.
A graph is used to reveal patterns by giving a visual representation of data.
a. must know the independent (x axis) and dependent variable (y axis) b. determine the range of data that needs to be plotted for each axis: try to take up at least ¾ of the paper -use a pencil and ruler c. number and label each axis: don’t forget the units d. plot the points and draw a line of best fit -curved or straight e. title the graph
27
Graphing Practice
Complete the problem-solving lab at the bottom of page 44 in your textbook. Answer the Analysis and Thinking Critically questions on the back of the graph.
28
How speed affects stopping distance
102030405060708090
100
10 15 20 25 30
speed (m/s)
sto
pp
ing
dis
tan
ce
(m
)
29
Scientific Notation
Values in science are often very large or very small, requiring a lot of zeros.
-ex: the distance between Earth and Neptune is
4,600,000,000,000 m apart and the speed of light
is 300,000,000 m/s.
this is a lot of zeros to keep track of.
Q: What do scientists do?
A: they use scientific notation, a short hand method of
writing extremely large or small numbers, to make
their calculations easier.
30
scientific notation is a value written as a simple number multiplied by a power of 10.
Power of 10 equivalents:
104 = 10,000
103 = 1000
102 = 100
101 = 10
100 = 1
10-1 = 0.1
10-2 = 0.01
10-3 = 0.001
10-4 = 0.0001
31
Writing Scientific Notation
1. Write the first 2 or 3 digits as a simple number with only one digit to the left of the decimal point.2. Count the number of decimal places you move the decimal. This will give you your power of 10. -If you move the decimal to the left the power of ten
will be positive. -If you move the decimal to the right the power of ten
will be negative.3. If you must adjust the decimal: -if you move it to the left, you add to the exponent
-if you move it to the right, you subtract the exponent
32
Dividing with Scientific Nototation Example
Lets calculate the time it takes for light to travel from Neptune to Earth. The speed of light is 3.0x108m/s and the distance from Neptune to Earth is 4.6x1012m.
-Use the formula v = d/t
-Rearrange to solve for t: t = d/v
-d = 4.6x1012m, v = 3.0x108m/s, t = ?
- t = 4.6x1012m = 1.5x104s (no adjustment)
3.0x108m/s
33
Dividing with Scientific Notation PracticeYou may not use a calculator.
Convert the following into scientific notation.
1. 0.000521 2. 1526000
3. 126580 4. 102300000
Convert the following into common form.
5. 2.35x10-2 6. 6.458x104
7. 4.2512x10-8 8. 1.520x102
Solve the following:
9. 2.70x105 ÷ 3.0x102
10. 2.0x104 ÷ 5x102
11. 8.0x106 ÷ 4.00x103
34
Multiplying with Scientific NotationExample
If it takes 2.7 x 1023 seconds for light to travel from one planet to another, how far apart are the planets? Remember light travels at a speed of 3.0 x 108 m/s.
-Use the formula v = d/t.
-Rearrange to solve for d: d = vt
-d = ?, v = 3.0 x 108 m/s
d = vt = (2.7 x1023 s) (3.0 x 108 m/s)
= 8.1 x 1031 m (no adjustment necessry)
35
Multiplying with Scientific Notation Practice
You may not use a calculator.
Review with dividing:
1. 1.2x103 ÷ 2.4x104
2. 4.6x10-3 ÷ 2.3x10-5
3. 6.02x105 ÷ 2.0x102
Multiplying:
4. (1.2x103)(2.4x104)
5. (4.6x10-3)(2.3x10-5)
6. (6.02x105)(2.0x102)
7. (2.70x105)(3.0x10-2)
36
Cumulative Scientific Notation Practice
You may not use a calculator.1. Write the following measurement in scientific notation. a. 37,500,000,000,000,000,000,000 m b. 0.000012 kg2. Write the following values in long (standard) form a. 4.5 x 103 grams b. 3.115 x 10-6 km3. Multiply. a. (3.5 x 1012)(2.2 x 105) b. (7.5 x 10-3)(1.2 x 10-2)4. Divide a. 3.5 x 1019 b. 4.6 x 10-3
1.2 x 107 2.1 x 10-7
37
Combined Measurement Practice
Show all work, including units!!Metrics: Convert the following:
1) 35 mL = ____ L 2) 0.005 kg = ____ g
Dimensional Analysis: Convert the following:
3) 3500 s = ____ hr 4) 4.2 L =_____ cm3
Scientific Notation: Convert to scientific notation:
5) 0.005 6) 505 7) 750600
Scientific Notation: Convert to standard notation:
8) 1.5x103 9) 3.35x10-6
Calculations: using Scientific Notation
10) (1.5 x 103)(3.5x105) 11) (3.45x10-3)/(1.2x 10-2)
12) (7.6x10-3)(8.2x107 ) 13) (6.8x107)/(2.2x10-5)
Top Related