S19 – Hydraulic Breaker Inspection Checklist H&SM&I06

S19 – Hydraulic Breaker Inspection Checklist H&SM&I06- 1 / 1 Produced in association with The Institute of Quarrying

Issue 1 : Revision 1 - September 2012 © QMJ Publishing Ltd

Health & Safety Risk

Management System

Site ........................................................................................................... Machine ............................................................................................ Date .........................

Item inspected M Tu W Th F S Su Action required Date completed

Before start up ✓ = OK 7 = defectCheck oil and water levels (hydraulic oil after start up) O O O O O O O ...................................... ...............................

Complete a walk round inspection O O O O O O O ...................................... ...............................

After start up (before moving off)Check instruments are reading correctly O O O O O O O ...................................... ...............................

Check the front and rear lights are OK O O O O O O O ...................................... ...............................

Check the all-round vision (mirrors, CCTV, radar etc) O O O O O O O 7 = stop and seek advice ...............................

Is the horn working? O O O O O O O ...................................... ...............................

Check the operation of the air conditioning/filtration O O O O O O O ...................................... ...............................

Are canopies closed and walkways clear? O O O O O O O ...................................... ...............................

Before breakingEnsure demarcation signs are in place O O O O O O O ...................................... ...............................

Check slewing and tracking are OK O O O O O O O ...................................... ...............................

During OperationInspect for oil, water, or fuel leaks and unusual smells or noises O O O O O O O ...................................... ...............................

Grease – in accordance with manufacturer’s instructions O O O O O O O ...................................... ...............................

At end of shiftDrain the air tanks O O O O O O O ...................................... ...............................

GeneralCheck that faces, stockpiles and haul roads are free of contamination or overhangs and there is suitable edge protection O O O O O O O ...................................... ...............................

Check for boom/dipper/A-frame cracks, etc O O O O O O O 7 = stop and seek advice ...............................

Check handrails/handholds and condition of window catches O O O O O O O ...................................... ...............................

Check visual condition of wire rope O O O O O O O ...................................... ...............................

Check condition of tracks/rollers O O O O O O O ...................................... ...............................

Seat and seat belt condition O O O O O O O 7 = stop and seek advice ...............................

Clean the cab (vacuum etc) O O O O O O O ...................................... ...............................

Signature of person carrying out inspection ............................................................................... Countersignature of management .....................................................................................

Dai

lyW

eekl

y