S1688 Pneumatic Stencil Cleaner
Prepare by: Angela Guo
www.smthelp.comEmail: [email protected]:+86-139 23898396Tel: +86-755-83203237Fax:+86-755-23240492Skype ID: angela7140
www.smthelp.com
Features:
- Pneumatic operating, no electronic
- Used for cleaning solder paste, glue,etc
- Whole machine using 304 Stainless steel
- Cleaning in closed-loop, lower consumption
- One-button operation
www.smthelp.com
●Suitable for steel, copper mesh, wire mesh, porous nets stencil cleaning
●The same also applies to circuit boards, fixtures, and appliances and other similar products scraper cleaning (as shown below)
Application
www.smthelp.com
Simple operation
3 steps to operate:
—- 1. Set cleaning time
—- 2. Set Drying time
— 3. Press START
www.smthelp.com
-User-friendly design, one-button operation, easy to complete cleaningand drying the whole process work
Before and after cleaning
www.smthelp.com
High density, such as rotary cleaning nozzle, the pressure on both sides of clean power, does not destroy the stencil tension
Technical Specs:
DIMENSIONS 900(L)*700(W)*1730(H)mmSTENCIL SIZE 750*736*40mm(Max)APPLICATION Solder paste,deposit
PRESSURE SYSTEM 2set
CLEAN TIME 3-5minWEIGHT 320KGLIQUID CAPACITY Max50L,Min20L
DRY TIME 3-5MinTHREE LEVELS FILTERING SYSTEM 10µm,5µm,1µm
AIR CONSUMPTION 400-600L/minute(Dry Process)SOLVENT IPA,alcohol and water-based solvent
www.smthelp.com
Top Related